diff --git a/src/source/building-running.jd b/src/source/building-running.jd
index bff563a..905b94e 100644
--- a/src/source/building-running.jd
+++ b/src/source/building-running.jd
@@ -133,7 +133,7 @@
 <p>The emulator is added to your path automatically by the build process. To run the emulator, type</p>
 <pre><code>$ emulator
 </code></pre>
-<h1 id="using-ccache">Using ccache</h1>
+<h2 id="using-ccache">Using ccache</h2>
 <p>ccache is a compiler cache for C and C++ that can help make builds faster.
 In the root of the source tree, do the following:</p>
 <pre><code>$ export USE_CCACHE=1
@@ -147,10 +147,10 @@
 <p>On OSX, you should replace <code>linux-x86</code> with <code>darwin-x86</code>.</p>
 <p>When using Ice Cream Sandwich (4.0.x) or older, you should replace
 <code>prebuilts/misc</code> with <code>prebuilt</code>.</p>
-<h1 id="troubleshooting-common-build-errors">Troubleshooting Common Build Errors</h1>
-<h2 id="wrong-java-version">Wrong Java Version</h2>
-<p>If you are attempting to build froyo or earlier with Java 1.6, or gingerbread or later
-with Java 1.5, <code>make</code> will abort with a message such as</p>
+<h2 id="troubleshooting-common-build-errors">Troubleshooting Common Build Errors</h2>
+<h3 id="wrong-java-version">Wrong Java Version</h3>
+<p>If you are attempting to build a version of Android inconsistent with your
+version of Java, <code>make</code> will abort with a message such as</p>
 <pre><code>************************************************************
 You are attempting to build with the incorrect version
 of java.
@@ -165,7 +165,7 @@
 <p>This may be caused by</p>
 <ul>
 <li>
-<p>failing to install the correct JDK as specified in <a href="initializing.html">Initializing the Build Environment</a>. Building Android requires Sun JDK 5 or 6 depending on which release you are building.  </p>
+<p>failing to install the correct JDK as specified in <a href="initializing.html">Initializing the Build Environment</a>.</p>
 </li>
 <li>
 <p>another JDK that you previously installed appearing in your path.  You can remove the offending JDK from your path with:</p>
@@ -173,11 +173,11 @@
 </code></pre>
 </li>
 </ul>
-<h2 id="python-version-3">Python Version 3</h2>
+<h3 id="python-version-3">Python Version 3</h3>
 <p>Repo is built on particular functionality from Python 2.x and is unfortunately incompatible with Python 3.  In order to use repo, please install Python 2.x:</p>
 <pre><code>$ apt-get install python
 </code></pre>
-<h2 id="case-insensitive-filesystem">Case Insensitive Filesystem</h2>
+<h3 id="case-insensitive-filesystem">Case Insensitive Filesystem</h3>
 <p>If you are building on an HFS filesystem on Mac OS X, you may encounter an error such as</p>
 <pre><code>************************************************************
 You are building on a case-insensitive filesystem.
@@ -185,7 +185,7 @@
 ************************************************************
 </code></pre>
 <p>Please follow the instructions in <a href="initializing.html">Initializing the Build Environment</a> for creating a case-sensitive disk image.</p>
-<h2 id="no-usb-permission">No USB Permission</h2>
+<h3 id="no-usb-permission">No USB Permission</h3>
 <p>On most Linux systems, unprivileged users cannot access USB ports by default. If you see a permission denied error, follow the instructions
 <a href="initializing.html">Initializing the Build Environment</a> for configuring USB access.  </p>
 <p>If adb was already running and cannot connect to the device after
diff --git a/src/source/building.jd b/src/source/building.jd
index 3762eb8..17473b0 100644
--- a/src/source/building.jd
+++ b/src/source/building.jd
@@ -49,8 +49,11 @@
   </li>
 
   <li>
-  JDK 6 if you wish to build Gingerbread or newer; JDK 5 for Froyo or older.
-  You can download both from <a href="http://java.sun.com/javase/downloads/">java.sun.com</a>.</p>
+  JDK 7 to build the latest version of Android in the <a
+  href="https://android.googlesource.com/">Android Open Source Project
+  (AOSP)</a>; JDK 6 to build Gingerbread through KitKat; JDK 5 for Cupcake through
+  Froyo. See <a href="initializing.html">Initializing a Build Environment</a>
+  for installation instructions by operating system.</p>
   </li>
 
   <li>
diff --git a/src/source/code-style.jd b/src/source/code-style.jd
index 2dad502..3eadc68 100644
--- a/src/source/code-style.jd
+++ b/src/source/code-style.jd
@@ -262,8 +262,9 @@
 <p>Every method you write, whether public or otherwise, would benefit from
 Javadoc. Public methods are part of an API and therefore require Javadoc.</p>
 <p>Android does not currently enforce a specific style for writing Javadoc
-comments, but you should follow the 
-<a href="http://java.sun.com/j2se/javadoc/writingdoccomments/">Sun Javadoc conventions</a>.</p>
+comments, but you should follow the <a
+href="http://www.oracle.com/technetwork/java/codeconv-138413.html">Code
+Conventions for the Java Programming Language</a>.</p>
 <h3 id="write-short-methods">Write Short Methods</h3>
 <p>To the extent that it is feasible, methods should be kept small and
 focused. It is, however, recognized that long methods are sometimes
diff --git a/src/source/initializing.jd b/src/source/initializing.jd
index 8ff9996..38426c7 100644
--- a/src/source/initializing.jd
+++ b/src/source/initializing.jd
@@ -24,12 +24,15 @@
   </div>
 </div>
 
-<p>This section describes how to set up your local work environment to build the Android source files. You will need to use Linux or Mac OS. Building under Windows is not currently supported.</p>
-<p><em>Note: The source download is approximately 8.5GB in size.
+<p>This section describes how to set up your local work environment to build
+the Android source files. You will need to use Linux or Mac OS. Building under
+Windows is not currently supported.</p>
+<p><strong>Note</strong>: The source download is approximately 8.5GB in size.
 You will need over 30GB free to complete a single build, and
 up to 100GB (or more) for a full set of builds.</em></p>
-<p>For an overview of the entire code-review and code-update process, see <a href="life-of-a-patch.html">Life of a Patch</a>.</p>
-<h1 id="choosing-a-branch">Choosing a Branch</h1>
+<p>For an overview of the entire code-review and code-update process, see <a
+href="life-of-a-patch.html">Life of a Patch</a>.</p>
+<h2 id="choosing-a-branch">Choosing a Branch</h2>
 <p>Some of the requirements for your build environment are determined by which
 version of the source code you plan to compile. See
 <a href="build-numbers.html">Build Numbers</a> for a full listing of branches you may
@@ -38,7 +41,7 @@
 when you initialize the repository.</p>
 <p>Once you have selected a branch, follow the appropriate instructions below to
 set up your build environment.</p>
-<h1 id="setting-up-a-linux-build-environment">Setting up a Linux build environment</h1>
+<h2 id="setting-up-a-linux-build-environment">Setting up a Linux build environment</h2>
 <p>These instructions apply to all branches, including master.</p>
 <p>The Android build is routinely tested in house on recent versions of
 Ubuntu LTS (10.04), but most distributions should have the required
@@ -47,42 +50,37 @@
 <p>For Gingerbread (2.3.x) and newer versions, including the master
 branch, a 64-bit environment is required. Older versions can be
 compiled on 32-bit systems.</p>
-<p><em>Note: It is also possible to build Android in a virtual machine.
+<p><strong>Note</strong>: It is also possible to build Android in a virtual machine.
 If you are running Linux in a virtual machine, you will need at
 least 16GB of RAM/swap and 30GB or more of disk space in order to
-build the Android tree.</em></p>
-<p>Detailed instructions for Ubuntu and MacOS follow. In general you will need:</p>
-<ul>
-<li>
-<p>Python 2.6 -- 2.7, which you can download from <a href="http://www.python.org/download/">python.org</a>.</p>
-</li>
-<li>
-<p>GNU Make 3.81 -- 3.82, which you can download from <a href="http://ftp.gnu.org/gnu/make/">gnu.org</a>,</p>
-</li>
-<li>
-<p>JDK 6 if you wish to build Gingerbread or newer; JDK 5 for Froyo or older.  You can download both from <a href="http://java.sun.com/javase/downloads/">java.sun.com</a>.</p>
-</li>
-<li>
-<p>Git 1.7 or newer. You can find it at <a href="http://git-scm.com/download">git-scm.com</a>.</p>
-</li>
-</ul>
-<h2 id="installing-the-jdk">Installing the JDK</h2>
-<p>The Sun JDK is no longer in Ubuntu's main package repository.  In order to download it, you need to add the appropriate repository and indicate to the system which JDK should be used.</p>
-<p>Java 6: for Gingerbread and newer</p>
-<pre><code>$ sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner"
-$ sudo apt-get update
-$ sudo apt-get install sun-java6-jdk
-</code></pre>
-<p>Java 5: for Froyo and older</p>
-<pre><code>$ sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu hardy main multiverse"
-$ sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu hardy-updates main multiverse"
-$ sudo apt-get update
-$ sudo apt-get install sun-java5-jdk
-</code></pre>
-<p><em>Note: The <code>lunch</code> command in the build step will ensure that the Sun JDK is
-used instead of any previously installed JDK.</em></p>
+build the Android tree.</p>
+<p>See the <a href="building.html">Downloading and Building</a> page for the
+list of hardware and software requirements. Then follow the detailed
+instructions for Ubuntu and MacOS below.</p>
 
-<h2 id="installing-required-packages-ubuntu-1204">Installing required packages (Ubuntu 12.04)</h2>
+<h3 id="installing-the-jdk">Installing the JDK</h3>
+<p>The latest version of Android in the <a
+href="https://android.googlesource.com/">Android Open Source Project (AOSP)</a>
+requires Java 7. On Ubuntu, use <a href="http://openjdk.java.net/install/">OpenJDK</a>.</p>
+<p>Java 7: For the latest version of Android</p>
+<pre><code>$ sudo apt-get update
+$ sudo apt-get install openjdk-7-jdk
+</code></pre>
+
+<p>Optionally, update the default Java version by running:</p>
+<pre><code>$ sudo update-alternatives --config java
+$ sudo update-alternatives --config javac
+</code></pre>
+
+<p>To develop older versions of Android, download and install the corresponding version of the <a
+href="http://www.oracle.com/technetwork/java/javase/archive-139210.html">Java JDK</a>:<br/>
+Java 6: for Gingerbread through KitKat<br/>
+Java 5: for Cupcake through Froyo</p>
+
+<p><strong>Note</strong>: The <code>lunch</code> command in the build step will ensure that the Sun JDK is
+used instead of any previously installed JDK.</p>
+
+<h3 id="installing-required-packages-ubuntu-1204">Installing required packages (Ubuntu 12.04)</h3>
 <p>You will need a 64-bit version of Ubuntu.  Ubuntu 12.04 is recommended.
 Building using an older version of Ubuntu is not supported on master or recent releases.</p>
 <pre><code>$ sudo apt-get install git gnupg flex bison gperf build-essential \
@@ -93,7 +91,7 @@
 $ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
 </code></pre>
 
-<h2 id="installing-required-packages-ubuntu-1004-1110">Installing required packages (Ubuntu 10.04 -- 11.10)</h2>
+<h3 id="installing-required-packages-ubuntu-1004-1110">Installing required packages (Ubuntu 10.04 -- 11.10)</h3>
 <p>Building on Ubuntu 10.04-11.10 is no longer supported, but may be useful for building older
 releases of AOSP.</p>
 <pre><code>$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
@@ -108,7 +106,7 @@
 <p>On Ubuntu 11.10:</p>
 <pre><code>$ sudo apt-get install libx11-dev:i386
 </code></pre>
-<h2 id="configuring-usb-access">Configuring USB Access</h2>
+<h3 id="configuring-usb-access">Configuring USB Access</h3>
 <p>Under GNU/linux systems (and specifically under Ubuntu systems),
 regular users can't directly access USB devices by default. The
 system needs to be configured to allow such access.</p>
@@ -159,7 +157,7 @@
 Lucid Lynx (10.04.x LTS). Other versions of Ubuntu or other
 variants of GNU/linux might require different configurations.</p>
 <p><a name="ccache"></a></p>
-<h2 id="setting-up-ccache">Setting up ccache</h2>
+<h3 id="setting-up-ccache">Setting up ccache</h3>
 <p>You can optionally tell the build to use the ccache compilation tool.
 Ccache acts as a compiler cache that can be used to speed-up rebuilds.
 This works very well if you do "make clean" often, or if you frequently
@@ -182,7 +180,7 @@
 <pre><code>prebuilt/linux-x86/ccache/ccache -M 50G
 </code></pre>
 <p>This setting is stored in the CCACHE_DIR and is persistent.</p>
-<h2 id="using-a-separate-output-directory">Using a separate output directory</h2>
+<h3 id="using-a-separate-output-directory">Using a separate output directory</h3>
 <p>By default, the output of each build is stored in the out/
 subdirectory of the matching source tree.</p>
 <p>On some machines with multiple storage devices, builds are
@@ -208,7 +206,7 @@
 unpredictable results.</p>
 <p>This is only supported on Jelly Bean (4.1) and newer,
 including the master branch.</p>
-<h1 id="setting-up-a-mac-os-x-build-environment">Setting up a Mac OS X build environment</h1>
+<h2 id="setting-up-a-mac-os-x-build-environment">Setting up a Mac OS X build environment</h2>
 <p>In a default installation, OS X runs on a case-preserving but case-insensitive
 filesystem. This type of filesystem is not supported by git and will cause some
 git commands (such as "git status") to behave abnormally. Because of this, we
@@ -232,22 +230,26 @@
 function mountAndroid { hdiutil attach ~/android.dmg -mountpoint /Volumes/android; }
 </code></pre>
 <p>Once mounted, you'll do all your work in the "android" volume. You can eject it (unmount it) just like you would with an external drive.</p>
-<h2 id="master-branch">Master branch</h2>
+<h3 id="master-branch">Master branch</h3>
 <p>To build the latest source in a Mac OS environment, you will need an Intel/x86
 machine running MacOS 10.8 (Mountain Lion), along with Xcode
 4.5.2 and Command Line Tools.</p>
-<h2 id="branch-40x-and-all-earlier-branches">Branch 4.2.x and earlier branches</h2>
+<p>You will also need the <a
+href="http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html">Java 7 JDK</a>.
+Select the file: jdk-7u51-macosx-x64.dmg</p>
+
+<h3 id="branch-40x-and-all-earlier-branches">Branch 4.2.x and earlier branches</h3>
 <p>To build 4.2.x and earlier source in a Mac OS environment, you will need an Intel/x86
 machine running MacOS 10.6 (Snow Leopard) or MacOS 10.7 (Lion), along with Xcode
 4.2 (Apple's Developer Tools). Although Lion does not come with a JDK, it should
 install automatically when you attempt to build the source.</p>
 <p>The remaining sections for Mac OS X only apply to those who wish to build
 earlier branches.</p>
-<h2 id="branch-40x-and-all-earlier-branches">Branch 4.0.x and all earlier branches</h2>
+<h3 id="branch-40x-and-all-earlier-branches">Branch 4.0.x and all earlier branches</h3>
 <p>To build android-4.0.x and earlier branches in a Mac OS environment, you need an
 Intel/x86 machine running MacOS 10.5 (Leopard) or MacOS 10.6 (Snow Leopard). You
 will need the MacOS 10.5 SDK.</p>
-<h3 id="installing-required-packages">Installing required packages</h3>
+<h4 id="installing-required-packages">Installing required packages</h4>
 <ul>
 <li>
 <p>Install Xcode from <a href="http://developer.apple.com/">the Apple developer site</a>.
@@ -272,7 +274,7 @@
 </code></pre>
 </li>
 </ul>
-<h3 id="reverting-from-make-382">Reverting from make 3.82</h3>
+<h4 id="reverting-from-make-382">Reverting from make 3.82</h4>
 <p>For versions of Android before ICS, there is a bug in gmake 3.82 that prevents android from building.  You can install version 3.81 using MacPorts by taking the following steps:</p>
 <ul>
 <li>
@@ -299,12 +301,12 @@
 </code></pre>
 </li>
 </ul>
-<h3 id="setting-a-file-descriptor-limit">Setting a file descriptor limit</h3>
+<h4 id="setting-a-file-descriptor-limit">Setting a file descriptor limit</h4>
 <p>On MacOS the default limit on the number of simultaneous file descriptors open is too low and a highly parallel build process may exceed this limit.<br />
 </p>
 <p>To increase the cap, add the following lines to your <code>~/.bash_profile</code>: </p>
 <pre><code># set the number of open files to be 1024
 ulimit -S -n 1024
 </code></pre>
-<h1 id="next-download-the-source">Next: Download the source</h1>
-<p>Your build environment is good to go!  Proceed to <a href="downloading.html">downloading the source</a>....</p>
+<h2 id="next-download-the-source">Next: Download the source</h2>
+<p>Your build environment is good to go! Proceed to <a href="downloading.html">downloading the source</a>.</p>