diff --git a/src/devices/audio/latency.jd b/src/devices/audio/latency.jd
index a779157..9063895 100644
--- a/src/devices/audio/latency.jd
+++ b/src/devices/audio/latency.jd
@@ -166,7 +166,8 @@
   is a broad term that encompasses efforts to monitor
   and reduce power consumption while optimizing performance.
   <a href="http://en.wikipedia.org/wiki/Thermal_management_of_electronic_devices_and_systems">Thermal management</a>
-  is similar, but seeks to measure and control heat to avoid damage due to excess heat.
+  and <a href="http://en.wikipedia.org/wiki/Computer_cooling">computer cooling</a>
+  are similar, but seek to measure and control heat to avoid damage due to excess heat.
   In the Linux kernel, the CPU
   <a href="http://en.wikipedia.org/wiki/Governor_%28device%29">governor</a>
   is responsible for low-level policy, while user mode configures high-level policy.
diff --git a/src/devices/audio/latency_measure.jd b/src/devices/audio/latency_measure.jd
index 14574fb..0b1724a 100644
--- a/src/devices/audio/latency_measure.jd
+++ b/src/devices/audio/latency_measure.jd
@@ -91,7 +91,8 @@
 <h2 id="measuringRoundTrip">Measuring Round-Trip Latency</h2>
 
 <p>
-  Round-trip latency is the sum of output latency and input latency.
+  <a href="http://en.wikipedia.org/wiki/Round-trip_delay_time">Round-trip latency</a>
+  is the sum of output latency and input latency.
 </p>
 
 <h3 id="larsenTest">Larsen test</h3>
diff --git a/src/devices/audio/terminology.jd b/src/devices/audio/terminology.jd
index 1e232b0..3b773d7 100644
--- a/src/devices/audio/terminology.jd
+++ b/src/devices/audio/terminology.jd
@@ -108,6 +108,15 @@
 Compare to "mute."
 </dd>
 
+<dt>FIFO</dt>
+<dd>
+A hardware module or software data structure that implements
+<a href="http://en.wikipedia.org/wiki/FIFO">First In, First Out</a>
+queueing of data.  In the context of audio, the data stored in the queue
+are typically audio frames.  A FIFO can be implemented by a
+<a href="http://en.wikipedia.org/wiki/Circular_buffer">circular buffer</a>.
+</dd>
+
 <dt>frame</dt>
 <dd>
 A set of samples, one per channel, at a point in time.
@@ -167,6 +176,17 @@
 are the subject of "high-resolution audio".
 </dd>
 
+<dt>lossy</dt>
+<dd>
+A <a href="http://en.wikipedia.org/wiki/Lossy_compression">lossy data compression</a>
+algorithm attempts to preserve the most important features of media across
+encoding and decoding.  The result of decoding any previously encoded
+data is perceptually similar to the original data, but is not identical.
+Examples of lossy audio compression algorithms include MP3 and AAC.
+As analog values are from a continuous domain, whereas digital values are discrete,
+ADC and DAC are lossy conversions with respect to amplitude.  See also "transparency."
+</dd>
+
 <dt>mono</dt>
 <dd>
 One channel.
@@ -248,6 +268,14 @@
 sound position beyond stereo left and right.
 </dd>
 
+<dt>transparency</dt>
+<dd>
+The ideal result of lossy data compression, as stated in the
+<a href="http://en.wikipedia.org/wiki/Transparency_%28data_compression%29">Transparency Wikipedia article</a>.
+A lossy data conversion is said to be transparent if it is perceptually indistinguishable from the
+original by a human subject.
+</dd>
+
 <dt>underrun</dt>
 <dd>
 An audible <a href="http://en.wikipedia.org/wiki/Glitch">glitch</a> caused by failure
@@ -329,6 +357,13 @@
 audio and video data.  For mobile devices, either a micro-HDMI (type D) or MHL connector is used.
 </dd>
 
+<dt>Intel HDA</dt>
+<dd>
+<a href="http://en.wikipedia.org/wiki/Intel_High_Definition_Audio">Intel High Definition Audio</a>
+(commonly shortened to HDA) is a specification for, among other things, a front-panel connector.
+Not to be confused with generic "high-definition audio" or "high-resolution audio."
+</dd>
+
 <dt>MHL</dt>
 <dd>
 Mobile High-Definition Link is a mobile audio/video interface, often
@@ -352,6 +387,12 @@
 See Wikipedia article <a href="http://en.wikipedia.org/wiki/S/PDIF">S/PDIF</a>.
 </dd>
 
+<dt>Thunderbolt</dt>
+<dd>
+<a href="http://en.wikipedia.org/wiki/Thunderbolt_%28interface%29">Thunderbolt</a>
+is a multimedia interface that competes with USB and HDMI for connecting to high-end peripherals.
+</dd>
+
 <dt>USB</dt>
 <dd>
 Universal Serial Bus.
@@ -368,7 +409,9 @@
 implementor may need to be aware of these, but not the end user.
 </p>
 
+<p>
 See these Wikipedia articles:
+</p>
 <ul>
 <li><a href="http://en.wikipedia.org/wiki/General-purpose_input/output">GPIO</a></li>
 <li><a href="http://en.wikipedia.org/wiki/I%C2%B2C">I²C</a>, for control channel</li>
@@ -527,6 +570,11 @@
 tinyalsa.
 </dd>
 
+<dt>audio device</dt>
+<dd>
+Any audio I/O end-point which is backed by a HAL implementation.
+</dd>
+
 <dt>AudioEffect</dt>
 <dd>
 An API and implementation framework for output (post-processing) effects
@@ -583,6 +631,13 @@
 <a href="src.html">sample rate conversion</a>.
 </dd>
 
+<dt>audio source</dt>
+<dd>
+An <a href="http://developer.android.com/reference/android/media/MediaRecorder.AudioSource.html">audio source</a>
+is an enumeration of constants that indicates the desired use case for capturing audio input.
+As of API level 21 and above, <a href="attributes.html">audio attributes</a> are preferred.
+</dd>
+
 <dt>AudioTrack</dt>
 <dd>
 The primary low-level client API for sending data to an audio output