Merge "Remove mentions of CDMA devices"
diff --git a/src/source/building-devices.md b/src/source/building-devices.md
index c940475..0f7891d 100644
--- a/src/source/building-devices.md
+++ b/src/source/building-devices.md
@@ -22,15 +22,13 @@
The supported devices with the current release are the Galaxy Nexus, Motorola
Xoom, and Nexus S.
-Galaxy Nexus is supported both in GSM/HSPA+ configuration "maguro" and in
-CDMA/LTE configuration "toro". The GSM/HSPA+ configuration is only supported
+Galaxy Nexus is supported only in GSM/HSPA+ configuration "maguro" and only
if it was originally sold with a "yakju" operating system.
-The Motorola Xoom is supported in the configurations sold in the USA,
-in both variants: Wi-Fi only "wingray" and CDMA or CDMA/LTE "stingray".
+The Motorola Xoom is supported in the Wi-fi configuration "wingray"
+sold in the USA.
-Nexus S is supported, both in the GSM configuration "crespo" and in the
-CDMA/WiMAX configuration "crespo4g".
+Nexus S is supported in the GSM configuration "crespo".
In addition, [PandaBoard](http://pandaboard.org) a.k.a. "panda" is supported
in the master branch only, but is currently considered experimental.
@@ -45,6 +43,8 @@
obsolete, were experimental and unsupported in froyo, and can't be used with
newer versions of the Android Open-Source Project.
+No CDMA devices are supported.
+
## Building fastboot and adb ##
If you don't already have those tools, fastboot and adb can be built with
@@ -61,11 +61,8 @@
Device | Keys
---------|------
maguro | Press and hold both *Volume Up* and *Volume Down*, then press and hold *Power*
-toro | Press and hold both *Volume Up* and *Volume Down*, then press and hold *Power*
wingray | Press and hold *Volume Down*, then press and hold *Power*
-stingray | Press and hold *Volume Down*, then press and hold *Power*
crespo | Press and hold *Volume Up*, then press and hold *Power*
-crespo4g | Press and hold *Volume Up*, then press and hold *Power*
passion | Press and hold the trackball, then press *Power*
sapphire | Press and hold *Back*, then press *Power*
dream | Press and hold *Back*, then press *Power*
@@ -80,7 +77,7 @@
This is the default setup on ADP1 and ADP2.
-On Nexus One, Nexus S, Nexus S 4G, Xoom, and Galaxy Nexus,
+On Nexus One, Nexus S, Xoom, and Galaxy Nexus,
the bootloader is locked by default. With the device in fastboot mode, the
bootloader is unlocked with
@@ -89,7 +86,7 @@
The procedure must be confirmed on-screen, and deletes the user data for
privacy reasons. It only needs to be run once.
-Note that on the Nexus S, Nexus S 4G, Motorola Xoom and on Galaxy Nexus,
+Note that on the Nexus S, Motorola Xoom and on Galaxy Nexus,
all data on the phone is erased, i.e. both the applications' private data
and the shared data that is accessible over USB, including photos and
movies. Be sure to make a backup of any precious files you have before
@@ -97,7 +94,7 @@
On Nexus One, the operation voids the warranty and is irreversible.
-On Nexus S, Nexus S 4G, Xoom, and Galaxy Nexus,
+On Nexus S, Xoom, and Galaxy Nexus,
the bootloader can be locked back with
$ fastboot oem lock
@@ -110,7 +107,7 @@
from pure source code only, and requires additional hardware-related proprietary
libraries to run, specifically for hardware graphics acceleration.
-Official binaries for Nexus S, Nexus S 4G, Galaxy Nexus, and PandaBoard can be
+Official binaries for Nexus S, Galaxy Nexus, and PandaBoard can be
downloaded from
[Google's Nexus driver page](http://code.google.com/android/nexus/drivers.html),
which add access to additional hardware capabilities with non-Open-Source code.
@@ -125,14 +122,6 @@
enclosed license agreement, and the binaries and their matching makefiles
will get installed in the `vendor/` hierarchy of the source tree.
-There's an additional step on Nexus S 4G. Build the signapk tool with
-
- $ make signapk
-
-Then reassemble the proprietary applicatons with
-
- $ vendor/samsung/crespo4g/reassemble-apks.sh
-
### Cleaning up when adding proprietary binaries ###
In order to make sure that the newly installed binaries are properly
@@ -152,12 +141,9 @@
Device | Branch | Build configuration
---------|------------------|------------------------
maguro | android-4.0.3_r1 | full_maguro-userdebug
-toro | android-4.0.3_r1 | full_toro-userdebug
panda | master | full_panda-eng
wingray | android-4.0.3_r1 | full_wingray-userdebug
-stingray | android-4.0.3_r1 | full_stingray-userdebug
crespo | android-4.0.3_r1 | full_crespo-userdebug
-crespo4g | android-4.0.3_r1 | full_crespo4g-userdebug
passion | android-2.3.6_r1 | full_passion-userdebug
sapphire | android-2.2.2_r1 | full_sapphire-userdebug
dream | android-2.2.2_r1 | full_dream-userdebug
@@ -192,9 +178,9 @@
Once in recovery, open the menu (press Power + Volume Up), wipe the cache
partition, then wipe data.
-### Nexus S, Nexus S 4G and Galaxy Nexus Bootloader and Cell Radio compatibility ###
+### Nexus S and Galaxy Nexus Bootloader and Cell Radio compatibility ###
-On Nexus S, Nexus S 4G, and Galaxy Nexus, each version of Android has only
+On Nexus S, and Galaxy Nexus, each version of Android has only
been thoroughly tested with on specific version of the underlying bootloader
and cell radio software.
However, no compatibility issues are expected when running newer systems
@@ -234,16 +220,6 @@
2.3.6 (GRK39F) | I9020XXKA3 | M200KRKC1 | All previous versions
4.0.3 (IML74K) | I9020XXKL1 | M200KRKC1 | All previous versions
-Nexus S 4G:
-
-Android Version | Preferred Bootloader | Preferred Radio | Also possible
-----------------|----------------------|-----------------|--------------
-2.3.4 (GRJ06D) | D720SPRKC5 | D720SPRKC9
-2.3.4 (GRJ22) | D720SPRKC5 | D720SPRKD8 | All previous versions
-2.3.5 (GRJ90) | D720SPRKC5 | D720SPRKE5 | All previous versions
-2.3.7 (GWK74) | D720SPRKE1 (*) | D720SPRKH1 | All previous versions
-4.0.3 (IML74K) | D720SPRKE1 (*) | D720SPRKL1 | All previous versions
-
Galaxy Nexus (GSM/HSPA+):
Android Version | Preferred Bootloader | Preferred Radio | Also possible
@@ -252,40 +228,17 @@
4.0.2 (ICL53F) | PRIMEKK15 | I9250XXKK6 | All previous versions
4.0.3 (IML74K) | PRIMEKL01 | I9250XXKK6 | All previous versions
-Galaxy Nexus (CDMA/LTE):
-
-Android Version | Preferred Bootloader | Preferred Radio | Preferred CDMA Radio | Also possible
-----------------|----------------------|-----------------|----------------------|--------------
-4.0.1 (ITL41D) | PRIMEKJ10 | I515.EK02 | I515.EK01
-4.0.2 (ICL53F) | PRIMEKK15 | I515.EK02 | I515.EK05 | All previous versions
-4.0.3 (IML74K) | PRIMEKL01 | I515.EK04 | I515.EK06 | All previous versions
-
-If you're building a new version of Android, if your Nexus S, Nexus S 4G or
+If you're building a new version of Android, if your Nexus S or
Galaxy Nexus has
an older bootloader and radio image that is marked as being also possible in
the table above but is not recognized by fastboot, you can locally
delete the `version-bootloader` and `version-baseband` lines in
`device/samsung/crespo/board-info.txt` or
-`device/samsung/crespo4g/board-info.txt` or
-`device/samsung/maguro/board-info.txt` or
-`device/samsung/toro/board-info.txt`
-
-(*) As a note, bootloader version D720SPRKE1 for Nexus S 4G erroneously
-reports version D720SPRKE1 as the baseband version instead of the true baseband
-version after flashing a new baseband firmware. To make it report the proper
-version again, the phone needs to be powered down, then booted all the way to
-Android, then rebooted to the bootloader.
-
-## Activating the CDMA radio ##
-
-On the CDMA variant of the Motorola Xoom, the CDMA radio needs to be
-manually re-activated after each factory reset.
-
- $ adb shell su root radiooptions 8 *22899
+`device/samsung/maguro/board-info.txt`
## Restoring a device to its original factory state ##
-Factory images for Galaxy Nexus are available from
+Factory images for Galaxy Nexus (GSM/HSPA+) are available from
[Google's factory image page](http://code.google.com/android/nexus/images.html).
Factory images for the Motorola Xoom are distributed directly by Motorola.