| /* |
| Copyright (c) 2001-2006, Gerrit Pape |
| All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| |
| 1. Redistributions of source code must retain the above copyright notice, |
| this list of conditions and the following disclaimer. |
| 2. Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| 3. The name of the author may not be used to endorse or promote products |
| derived from this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO |
| EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
| ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* Busyboxed by Denis Vlasenko <vda.linux@googlemail.com> */ |
| /* TODO: depends on runit_lib.c - review and reduce/eliminate */ |
| |
| #include <sys/poll.h> |
| #include <sys/file.h> |
| #include "busybox.h" |
| #include "runit_lib.h" |
| |
| static unsigned verbose; |
| static int linemax = 1000; |
| ////static int buflen = 1024; |
| static int linelen; |
| |
| static char **fndir; |
| static int fdwdir; |
| static int wstat; |
| static struct taia trotate; |
| |
| static char *line; |
| static smallint exitasap; |
| static smallint rotateasap; |
| static smallint reopenasap; |
| static smallint linecomplete = 1; |
| |
| static smallint tmaxflag; |
| |
| static char repl; |
| static const char *replace = ""; |
| |
| static sigset_t *blocked_sigset; |
| static iopause_fd input; |
| static int fl_flag_0; |
| |
| static struct logdir { |
| ////char *btmp; |
| /* pattern list to match, in "aa\0bb\0\cc\0\0" form */ |
| char *inst; |
| char *processor; |
| char *name; |
| unsigned size; |
| unsigned sizemax; |
| unsigned nmax; |
| unsigned nmin; |
| /* int (not long) because of taia_uint() usage: */ |
| unsigned tmax; |
| int ppid; |
| int fddir; |
| int fdcur; |
| FILE* filecur; //// |
| int fdlock; |
| struct taia trotate; |
| char fnsave[FMT_PTIME]; |
| char match; |
| char matcherr; |
| } *dir; |
| static unsigned dirn; |
| |
| #define FATAL "fatal: " |
| #define WARNING "warning: " |
| #define PAUSE "pausing: " |
| #define INFO "info: " |
| |
| #define usage() bb_show_usage() |
| static void fatalx(const char *m0) |
| { |
| bb_error_msg_and_die(FATAL"%s", m0); |
| } |
| static void warn(const char *m0) { |
| bb_perror_msg(WARNING"%s", m0); |
| } |
| static void warn2(const char *m0, const char *m1) |
| { |
| bb_perror_msg(WARNING"%s: %s", m0, m1); |
| } |
| static void warnx(const char *m0, const char *m1) |
| { |
| bb_error_msg(WARNING"%s: %s", m0, m1); |
| } |
| static void pause_nomem(void) |
| { |
| bb_error_msg(PAUSE"out of memory"); |
| sleep(3); |
| } |
| static void pause1cannot(const char *m0) |
| { |
| bb_perror_msg(PAUSE"cannot %s", m0); |
| sleep(3); |
| } |
| static void pause2cannot(const char *m0, const char *m1) |
| { |
| bb_perror_msg(PAUSE"cannot %s %s", m0, m1); |
| sleep(3); |
| } |
| |
| static char* wstrdup(const char *str) |
| { |
| char *s; |
| while (!(s = strdup(str))) |
| pause_nomem(); |
| return s; |
| } |
| |
| static unsigned processorstart(struct logdir *ld) |
| { |
| int pid; |
| |
| if (!ld->processor) return 0; |
| if (ld->ppid) { |
| warnx("processor already running", ld->name); |
| return 0; |
| } |
| while ((pid = fork()) == -1) |
| pause2cannot("fork for processor", ld->name); |
| if (!pid) { |
| char *prog[4]; |
| int fd; |
| |
| /* child */ |
| signal(SIGTERM, SIG_DFL); |
| signal(SIGALRM, SIG_DFL); |
| signal(SIGHUP, SIG_DFL); |
| sig_unblock(SIGTERM); |
| sig_unblock(SIGALRM); |
| sig_unblock(SIGHUP); |
| |
| if (verbose) |
| bb_error_msg(INFO"processing: %s/%s", ld->name, ld->fnsave); |
| fd = xopen(ld->fnsave, O_RDONLY|O_NDELAY); |
| xmove_fd(fd, 0); |
| ld->fnsave[26] = 't'; |
| fd = xopen(ld->fnsave, O_WRONLY|O_NDELAY|O_TRUNC|O_CREAT); |
| xmove_fd(fd, 1); |
| fd = open_read("state"); |
| if (fd == -1) { |
| if (errno != ENOENT) |
| bb_perror_msg_and_die(FATAL"cannot %s processor %s", "open state for", ld->name); |
| close(xopen("state", O_WRONLY|O_NDELAY|O_TRUNC|O_CREAT)); |
| fd = xopen("state", O_RDONLY|O_NDELAY); |
| } |
| xmove_fd(fd, 4); |
| fd = xopen("newstate", O_WRONLY|O_NDELAY|O_TRUNC|O_CREAT); |
| xmove_fd(fd, 5); |
| |
| // getenv("SHELL")? |
| prog[0] = (char*)"sh"; |
| prog[1] = (char*)"-c"; |
| prog[2] = ld->processor; |
| prog[3] = NULL; |
| execve("/bin/sh", prog, environ); |
| bb_perror_msg_and_die(FATAL"cannot %s processor %s", "run", ld->name); |
| } |
| ld->ppid = pid; |
| return 1; |
| } |
| |
| static unsigned processorstop(struct logdir *ld) |
| { |
| char f[28]; |
| |
| if (ld->ppid) { |
| sig_unblock(SIGHUP); |
| while (wait_pid(&wstat, ld->ppid) == -1) |
| pause2cannot("wait for processor", ld->name); |
| sig_block(SIGHUP); |
| ld->ppid = 0; |
| } |
| if (ld->fddir == -1) return 1; |
| while (fchdir(ld->fddir) == -1) |
| pause2cannot("change directory, want processor", ld->name); |
| if (wait_exitcode(wstat) != 0) { |
| warnx("processor failed, restart", ld->name); |
| ld->fnsave[26] = 't'; |
| unlink(ld->fnsave); |
| ld->fnsave[26] = 'u'; |
| processorstart(ld); |
| while (fchdir(fdwdir) == -1) |
| pause1cannot("change to initial working directory"); |
| return ld->processor ? 0 : 1; |
| } |
| ld->fnsave[26] = 't'; |
| memcpy(f, ld->fnsave, 26); |
| f[26] = 's'; |
| f[27] = '\0'; |
| while (rename(ld->fnsave, f) == -1) |
| pause2cannot("rename processed", ld->name); |
| while (chmod(f, 0744) == -1) |
| pause2cannot("set mode of processed", ld->name); |
| ld->fnsave[26] = 'u'; |
| if (unlink(ld->fnsave) == -1) |
| bb_error_msg(WARNING"cannot unlink: %s/%s", ld->name, ld->fnsave); |
| while (rename("newstate", "state") == -1) |
| pause2cannot("rename state", ld->name); |
| if (verbose) |
| bb_error_msg(INFO"processed: %s/%s", ld->name, f); |
| while (fchdir(fdwdir) == -1) |
| pause1cannot("change to initial working directory"); |
| return 1; |
| } |
| |
| static void rmoldest(struct logdir *ld) |
| { |
| DIR *d; |
| struct dirent *f; |
| char oldest[FMT_PTIME]; |
| int n = 0; |
| |
| oldest[0] = 'A'; oldest[1] = oldest[27] = 0; |
| while (!(d = opendir("."))) |
| pause2cannot("open directory, want rotate", ld->name); |
| errno = 0; |
| while ((f = readdir(d))) { |
| if ((f->d_name[0] == '@') && (strlen(f->d_name) == 27)) { |
| if (f->d_name[26] == 't') { |
| if (unlink(f->d_name) == -1) |
| warn2("cannot unlink processor leftover", f->d_name); |
| } else { |
| ++n; |
| if (strcmp(f->d_name, oldest) < 0) |
| memcpy(oldest, f->d_name, 27); |
| } |
| errno = 0; |
| } |
| } |
| if (errno) |
| warn2("cannot read directory", ld->name); |
| closedir(d); |
| |
| if (ld->nmax && (n > ld->nmax)) { |
| if (verbose) |
| bb_error_msg(INFO"delete: %s/%s", ld->name, oldest); |
| if ((*oldest == '@') && (unlink(oldest) == -1)) |
| warn2("cannot unlink oldest logfile", ld->name); |
| } |
| } |
| |
| static unsigned rotate(struct logdir *ld) |
| { |
| struct stat st; |
| struct taia now; |
| |
| if (ld->fddir == -1) { |
| ld->tmax = 0; |
| return 0; |
| } |
| if (ld->ppid) |
| while (!processorstop(ld)) |
| /* wait */; |
| |
| while (fchdir(ld->fddir) == -1) |
| pause2cannot("change directory, want rotate", ld->name); |
| |
| /* create new filename */ |
| ld->fnsave[25] = '.'; |
| ld->fnsave[26] = 's'; |
| if (ld->processor) |
| ld->fnsave[26] = 'u'; |
| ld->fnsave[27] = '\0'; |
| do { |
| taia_now(&now); |
| fmt_taia25(ld->fnsave, &now); |
| errno = 0; |
| stat(ld->fnsave, &st); |
| } while (errno != ENOENT); |
| |
| if (ld->tmax && taia_less(&ld->trotate, &now)) { |
| taia_uint(&ld->trotate, ld->tmax); |
| taia_add(&ld->trotate, &now, &ld->trotate); |
| if (taia_less(&ld->trotate, &trotate)) |
| trotate = ld->trotate; |
| } |
| |
| if (ld->size > 0) { |
| while (fflush(ld->filecur) || fsync(ld->fdcur) == -1) |
| pause2cannot("fsync current logfile", ld->name); |
| while (fchmod(ld->fdcur, 0744) == -1) |
| pause2cannot("set mode of current", ld->name); |
| ////close(ld->fdcur); |
| fclose(ld->filecur); |
| |
| if (verbose) { |
| bb_error_msg(INFO"rename: %s/current %s %u", ld->name, |
| ld->fnsave, ld->size); |
| } |
| while (rename("current", ld->fnsave) == -1) |
| pause2cannot("rename current", ld->name); |
| while ((ld->fdcur = open("current", O_WRONLY|O_NDELAY|O_APPEND|O_CREAT, 0600)) == -1) |
| pause2cannot("create new current", ld->name); |
| /* we presume this cannot fail */ |
| ld->filecur = fdopen(ld->fdcur, "a"); //// |
| setvbuf(ld->filecur, NULL, _IOFBF, linelen); //// |
| coe(ld->fdcur); |
| ld->size = 0; |
| while (fchmod(ld->fdcur, 0644) == -1) |
| pause2cannot("set mode of current", ld->name); |
| rmoldest(ld); |
| processorstart(ld); |
| } |
| |
| while (fchdir(fdwdir) == -1) |
| pause1cannot("change to initial working directory"); |
| return 1; |
| } |
| |
| static int buffer_pwrite(int n, char *s, unsigned len) |
| { |
| int i; |
| struct logdir *ld = &dir[n]; |
| |
| if (ld->sizemax) { |
| if (ld->size >= ld->sizemax) |
| rotate(ld); |
| if (len > (ld->sizemax - ld->size)) |
| len = ld->sizemax - ld->size; |
| } |
| while (1) { |
| ////i = full_write(ld->fdcur, s, len); |
| ////if (i != -1) break; |
| i = fwrite(s, 1, len, ld->filecur); |
| if (i == len) break; |
| |
| if ((errno == ENOSPC) && (ld->nmin < ld->nmax)) { |
| DIR *d; |
| struct dirent *f; |
| char oldest[FMT_PTIME]; |
| int j = 0; |
| |
| while (fchdir(ld->fddir) == -1) |
| pause2cannot("change directory, want remove old logfile", |
| ld->name); |
| oldest[0] = 'A'; |
| oldest[1] = oldest[27] = '\0'; |
| while (!(d = opendir("."))) |
| pause2cannot("open directory, want remove old logfile", |
| ld->name); |
| errno = 0; |
| while ((f = readdir(d))) |
| if ((f->d_name[0] == '@') && (strlen(f->d_name) == 27)) { |
| ++j; |
| if (strcmp(f->d_name, oldest) < 0) |
| memcpy(oldest, f->d_name, 27); |
| } |
| if (errno) warn2("cannot read directory, want remove old logfile", |
| ld->name); |
| closedir(d); |
| errno = ENOSPC; |
| if (j > ld->nmin) { |
| if (*oldest == '@') { |
| bb_error_msg(WARNING"out of disk space, delete: %s/%s", |
| ld->name, oldest); |
| errno = 0; |
| if (unlink(oldest) == -1) { |
| warn2("cannot unlink oldest logfile", ld->name); |
| errno = ENOSPC; |
| } |
| while (fchdir(fdwdir) == -1) |
| pause1cannot("change to initial working directory"); |
| } |
| } |
| } |
| if (errno) |
| pause2cannot("write to current", ld->name); |
| } |
| |
| ld->size += i; |
| if (ld->sizemax) |
| if (s[i-1] == '\n') |
| if (ld->size >= (ld->sizemax - linemax)) |
| rotate(ld); |
| return i; |
| } |
| |
| static void logdir_close(struct logdir *ld) |
| { |
| if (ld->fddir == -1) |
| return; |
| if (verbose) |
| bb_error_msg(INFO"close: %s", ld->name); |
| close(ld->fddir); |
| ld->fddir = -1; |
| if (ld->fdcur == -1) |
| return; /* impossible */ |
| while (fflush(ld->filecur) || fsync(ld->fdcur) == -1) |
| pause2cannot("fsync current logfile", ld->name); |
| while (fchmod(ld->fdcur, 0744) == -1) |
| pause2cannot("set mode of current", ld->name); |
| ////close(ld->fdcur); |
| fclose(ld->filecur); |
| ld->fdcur = -1; |
| if (ld->fdlock == -1) |
| return; /* impossible */ |
| close(ld->fdlock); |
| ld->fdlock = -1; |
| free(ld->processor); |
| ld->processor = NULL; |
| } |
| |
| static unsigned logdir_open(struct logdir *ld, const char *fn) |
| { |
| char buf[128]; |
| struct taia now; |
| char *new, *s, *np; |
| int i; |
| struct stat st; |
| |
| ld->fddir = open(fn, O_RDONLY|O_NDELAY); |
| if (ld->fddir == -1) { |
| warn2("cannot open log directory", (char*)fn); |
| return 0; |
| } |
| coe(ld->fddir); |
| if (fchdir(ld->fddir) == -1) { |
| logdir_close(ld); |
| warn2("cannot change directory", (char*)fn); |
| return 0; |
| } |
| ld->fdlock = open("lock", O_WRONLY|O_NDELAY|O_APPEND|O_CREAT, 0600); |
| if ((ld->fdlock == -1) |
| || (lock_exnb(ld->fdlock) == -1) |
| ) { |
| logdir_close(ld); |
| warn2("cannot lock directory", (char*)fn); |
| while (fchdir(fdwdir) == -1) |
| pause1cannot("change to initial working directory"); |
| return 0; |
| } |
| coe(ld->fdlock); |
| |
| ld->size = 0; |
| ld->sizemax = 1000000; |
| ld->nmax = ld->nmin = 10; |
| ld->tmax = 0; |
| ld->name = (char*)fn; |
| ld->ppid = 0; |
| ld->match = '+'; |
| free(ld->inst); ld->inst = NULL; |
| free(ld->processor); ld->processor = NULL; |
| |
| /* read config */ |
| i = open_read_close("config", buf, sizeof(buf)); |
| if (i < 0) |
| warn2("cannot read config", ld->name); |
| if (i > 0) { |
| if (verbose) bb_error_msg(INFO"read: %s/config", ld->name); |
| s = buf; |
| while (s) { |
| np = strchr(s, '\n'); |
| if (np) *np++ = '\0'; |
| switch (s[0]) { |
| case '+': |
| case '-': |
| case 'e': |
| case 'E': |
| while (1) { |
| int l = asprintf(&new, "%s%s\n", ld->inst?:"", s); |
| if (l >= 0 && new) break; |
| pause_nomem(); |
| } |
| free(ld->inst); |
| ld->inst = new; |
| break; |
| case 's': { |
| static const struct suffix_mult km_suffixes[] = { |
| { "k", 1024 }, |
| { "m", 1024*1024 }, |
| { NULL, 0 } |
| }; |
| ld->sizemax = xatou_sfx(&s[1], km_suffixes); |
| break; |
| } |
| case 'n': |
| ld->nmax = xatoi_u(&s[1]); |
| break; |
| case 'N': |
| ld->nmin = xatoi_u(&s[1]); |
| break; |
| case 't': { |
| static const struct suffix_mult mh_suffixes[] = { |
| { "m", 60 }, |
| { "h", 60*60 }, |
| /*{ "d", 24*60*60 },*/ |
| { NULL, 0 } |
| }; |
| ld->tmax = xatou_sfx(&s[1], mh_suffixes); |
| if (ld->tmax) { |
| taia_uint(&ld->trotate, ld->tmax); |
| taia_add(&ld->trotate, &now, &ld->trotate); |
| if (!tmaxflag || taia_less(&ld->trotate, &trotate)) |
| trotate = ld->trotate; |
| tmaxflag = 1; |
| } |
| break; |
| } |
| case '!': |
| if (s[1]) { |
| free(ld->processor); |
| ld->processor = wstrdup(s); |
| } |
| break; |
| } |
| s = np; |
| } |
| /* Convert "aa\nbb\ncc\n\0" to "aa\0bb\0cc\0\0" */ |
| s = ld->inst; |
| while (s) { |
| np = strchr(s, '\n'); |
| if (np) *np++ = '\0'; |
| s = np; |
| } |
| } |
| |
| /* open current */ |
| i = stat("current", &st); |
| if (i != -1) { |
| if (st.st_size && ! (st.st_mode & S_IXUSR)) { |
| ld->fnsave[25] = '.'; |
| ld->fnsave[26] = 'u'; |
| ld->fnsave[27] = '\0'; |
| do { |
| taia_now(&now); |
| fmt_taia25(ld->fnsave, &now); |
| errno = 0; |
| stat(ld->fnsave, &st); |
| } while (errno != ENOENT); |
| while (rename("current", ld->fnsave) == -1) |
| pause2cannot("rename current", ld->name); |
| rmoldest(ld); |
| i = -1; |
| } else { |
| /* Be paranoid: st.st_size can be not just bigger, but WIDER! */ |
| /* (bug in original svlogd. remove this comment when fixed there) */ |
| ld->size = (st.st_size > ld->sizemax) ? ld->sizemax : st.st_size; |
| } |
| } else { |
| if (errno != ENOENT) { |
| logdir_close(ld); |
| warn2("cannot stat current", ld->name); |
| while (fchdir(fdwdir) == -1) |
| pause1cannot("change to initial working directory"); |
| return 0; |
| } |
| } |
| while ((ld->fdcur = open("current", O_WRONLY|O_NDELAY|O_APPEND|O_CREAT, 0600)) == -1) |
| pause2cannot("open current", ld->name); |
| /* we presume this cannot fail */ |
| ld->filecur = fdopen(ld->fdcur, "a"); //// |
| setvbuf(ld->filecur, NULL, _IOFBF, linelen); //// |
| |
| coe(ld->fdcur); |
| while (fchmod(ld->fdcur, 0644) == -1) |
| pause2cannot("set mode of current", ld->name); |
| |
| if (verbose) { |
| if (i == 0) bb_error_msg(INFO"append: %s/current", ld->name); |
| else bb_error_msg(INFO"new: %s/current", ld->name); |
| } |
| |
| while (fchdir(fdwdir) == -1) |
| pause1cannot("change to initial working directory"); |
| return 1; |
| } |
| |
| static void logdirs_reopen(void) |
| { |
| struct taia now; |
| int l; |
| int ok = 0; |
| |
| tmaxflag = 0; |
| taia_now(&now); |
| for (l = 0; l < dirn; ++l) { |
| logdir_close(&dir[l]); |
| if (logdir_open(&dir[l], fndir[l])) ok = 1; |
| } |
| if (!ok) fatalx("no functional log directories"); |
| } |
| |
| /* Will look good in libbb one day */ |
| static ssize_t ndelay_read(int fd, void *buf, size_t count) |
| { |
| if (!(fl_flag_0 & O_NONBLOCK)) |
| fcntl(fd, F_SETFL, fl_flag_0 | O_NONBLOCK); |
| count = safe_read(fd, buf, count); |
| if (!(fl_flag_0 & O_NONBLOCK)) |
| fcntl(fd, F_SETFL, fl_flag_0); |
| return count; |
| } |
| |
| /* Used for reading stdin */ |
| static int buffer_pread(int fd, char *s, unsigned len, struct taia *now) |
| { |
| int i; |
| |
| if (rotateasap) { |
| for (i = 0; i < dirn; ++i) |
| rotate(dir+i); |
| rotateasap = 0; |
| } |
| if (exitasap) { |
| if (linecomplete) |
| return 0; |
| len = 1; |
| } |
| if (reopenasap) { |
| logdirs_reopen(); |
| reopenasap = 0; |
| } |
| taia_uint(&trotate, 2744); |
| taia_add(&trotate, now, &trotate); |
| for (i = 0; i < dirn; ++i) |
| if (dir[i].tmax) { |
| if (taia_less(&dir[i].trotate, now)) |
| rotate(dir+i); |
| if (taia_less(&dir[i].trotate, &trotate)) |
| trotate = dir[i].trotate; |
| } |
| |
| while (1) { |
| sigprocmask(SIG_UNBLOCK, blocked_sigset, NULL); |
| iopause(&input, 1, &trotate, now); |
| sigprocmask(SIG_BLOCK, blocked_sigset, NULL); |
| i = ndelay_read(fd, s, len); |
| if (i >= 0) break; |
| if (errno != EAGAIN) { |
| warn("cannot read standard input"); |
| break; |
| } |
| /* else: EAGAIN - normal, repeat silently */ |
| } |
| |
| if (i > 0) { |
| int cnt; |
| linecomplete = (s[i-1] == '\n'); |
| if (!repl) return i; |
| |
| cnt = i; |
| while (--cnt >= 0) { |
| char ch = *s; |
| if (ch != '\n') { |
| if (ch < 32 || ch > 126) |
| *s = repl; |
| else { |
| int j; |
| for (j = 0; replace[j]; ++j) { |
| if (ch == replace[j]) { |
| *s = repl; |
| break; |
| } |
| } |
| } |
| } |
| s++; |
| } |
| } |
| return i; |
| } |
| |
| |
| static void sig_term_handler(int sig_no) |
| { |
| if (verbose) |
| bb_error_msg(INFO"sig%s received", "term"); |
| exitasap = 1; |
| } |
| |
| static void sig_child_handler(int sig_no) |
| { |
| int pid, l; |
| |
| if (verbose) |
| bb_error_msg(INFO"sig%s received", "child"); |
| while ((pid = wait_nohang(&wstat)) > 0) |
| for (l = 0; l < dirn; ++l) |
| if (dir[l].ppid == pid) { |
| dir[l].ppid = 0; |
| processorstop(&dir[l]); |
| break; |
| } |
| } |
| |
| static void sig_alarm_handler(int sig_no) |
| { |
| if (verbose) |
| bb_error_msg(INFO"sig%s received", "alarm"); |
| rotateasap = 1; |
| } |
| |
| static void sig_hangup_handler(int sig_no) |
| { |
| if (verbose) |
| bb_error_msg(INFO"sig%s received", "hangup"); |
| reopenasap = 1; |
| } |
| |
| static void logmatch(struct logdir *ld) |
| { |
| char *s; |
| |
| ld->match = '+'; |
| ld->matcherr = 'E'; |
| s = ld->inst; |
| while (s && s[0]) { |
| switch (s[0]) { |
| case '+': |
| case '-': |
| if (pmatch(s+1, line, linelen)) |
| ld->match = s[0]; |
| break; |
| case 'e': |
| case 'E': |
| if (pmatch(s+1, line, linelen)) |
| ld->matcherr = s[0]; |
| break; |
| } |
| s += strlen(s) + 1; |
| } |
| } |
| |
| int svlogd_main(int argc, char **argv); |
| int svlogd_main(int argc, char **argv) |
| { |
| sigset_t ss; |
| char *r,*l,*b; |
| ssize_t stdin_cnt = 0; |
| int i; |
| unsigned opt; |
| unsigned timestamp = 0; |
| void* (*memRchr)(const void *, int, size_t) = memchr; |
| |
| #define line bb_common_bufsiz1 |
| |
| opt_complementary = "tt:vv"; |
| opt = getopt32(argc, argv, "r:R:l:b:tv", |
| &r, &replace, &l, &b, ×tamp, &verbose); |
| if (opt & 1) { // -r |
| repl = r[0]; |
| if (!repl || r[1]) usage(); |
| } |
| if (opt & 2) if (!repl) repl = '_'; // -R |
| if (opt & 4) { // -l |
| linemax = xatou_range(l, 0, BUFSIZ-26); |
| if (linemax == 0) linemax = BUFSIZ-26; |
| if (linemax < 256) linemax = 256; |
| } |
| ////if (opt & 8) { // -b |
| //// buflen = xatoi_u(b); |
| //// if (buflen == 0) buflen = 1024; |
| ////} |
| //if (opt & 0x10) timestamp++; // -t |
| //if (opt & 0x20) verbose++; // -v |
| //if (timestamp > 2) timestamp = 2; |
| argv += optind; |
| argc -= optind; |
| |
| dirn = argc; |
| if (dirn <= 0) usage(); |
| ////if (buflen <= linemax) usage(); |
| fdwdir = xopen(".", O_RDONLY|O_NDELAY); |
| coe(fdwdir); |
| dir = xmalloc(dirn * sizeof(struct logdir)); |
| for (i = 0; i < dirn; ++i) { |
| dir[i].fddir = -1; |
| dir[i].fdcur = -1; |
| ////dir[i].btmp = xmalloc(buflen); |
| dir[i].ppid = 0; |
| } |
| /* line = xmalloc(linemax + (timestamp ? 26 : 0)); */ |
| fndir = argv; |
| input.fd = 0; |
| input.events = IOPAUSE_READ; |
| /* We cannot set NONBLOCK on fd #0 permanently - this setting |
| * _isn't_ per-process! It is shared among all other processes |
| * with the same stdin */ |
| fl_flag_0 = fcntl(0, F_GETFL, 0); |
| |
| blocked_sigset = &ss; |
| sigemptyset(&ss); |
| sigaddset(&ss, SIGTERM); |
| sigaddset(&ss, SIGCHLD); |
| sigaddset(&ss, SIGALRM); |
| sigaddset(&ss, SIGHUP); |
| sigprocmask(SIG_BLOCK, &ss, NULL); |
| sig_catch(SIGTERM, sig_term_handler); |
| sig_catch(SIGCHLD, sig_child_handler); |
| sig_catch(SIGALRM, sig_alarm_handler); |
| sig_catch(SIGHUP, sig_hangup_handler); |
| |
| logdirs_reopen(); |
| |
| /* Without timestamps, we don't have to print each line |
| * separately, so we can look for _last_ newline, not first, |
| * thus batching writes */ |
| if (!timestamp) |
| memRchr = memrchr; |
| |
| setvbuf(stderr, NULL, _IOFBF, linelen); |
| |
| /* Each iteration processes one or more lines */ |
| while (1) { |
| struct taia now; |
| char stamp[FMT_PTIME]; |
| char *lineptr; |
| char *printptr; |
| char *np; |
| int printlen; |
| char ch; |
| |
| lineptr = line; |
| taia_now(&now); |
| /* Prepare timestamp if needed */ |
| if (timestamp) { |
| switch (timestamp) { |
| case 1: |
| fmt_taia25(stamp, &now); |
| break; |
| default: /* case 2: */ |
| fmt_ptime30nul(stamp, &now); |
| break; |
| } |
| lineptr += 26; |
| } |
| |
| /* lineptr[0..linemax-1] - buffer for stdin */ |
| /* (possibly has some unprocessed data from prev loop) */ |
| |
| /* Refill the buffer if needed */ |
| np = memRchr(lineptr, '\n', stdin_cnt); |
| if (!np && !exitasap) { |
| i = linemax - stdin_cnt; /* avail. bytes at tail */ |
| if (i >= 128) { |
| i = buffer_pread(0, lineptr + stdin_cnt, i, &now); |
| if (i <= 0) /* EOF or error on stdin */ |
| exitasap = 1; |
| else { |
| np = memRchr(lineptr + stdin_cnt, '\n', i); |
| stdin_cnt += i; |
| } |
| } |
| } |
| if (stdin_cnt <= 0 && exitasap) |
| break; |
| |
| /* Search for '\n' (in fact, np already holds the result) */ |
| linelen = stdin_cnt; |
| if (np) { |
| print_to_nl: /* NB: starting from here lineptr may point |
| * farther out into line[] */ |
| linelen = np - lineptr + 1; |
| } |
| /* linelen == no of chars incl. '\n' (or == stdin_cnt) */ |
| ch = lineptr[linelen-1]; |
| |
| /* Biggest performance hit was coming from the fact |
| * that we did not buffer writes. We were reading many lines |
| * in one read() above, but wrote one line per write(). |
| * We are using stdio to fix that */ |
| |
| /* write out lineptr[0..linelen-1] to each log destination |
| * (or lineptr[-26..linelen-1] if timestamping) */ |
| printlen = linelen; |
| printptr = lineptr; |
| if (timestamp) { |
| printlen += 26; |
| printptr -= 26; |
| memcpy(printptr, stamp, 25); |
| printptr[25] = ' '; |
| } |
| for (i = 0; i < dirn; ++i) { |
| struct logdir *ld = &dir[i]; |
| if (ld->fddir == -1) continue; |
| if (ld->inst) |
| logmatch(ld); |
| if (ld->matcherr == 'e') |
| ////full_write(2, printptr, printlen); |
| fwrite(lineptr, 1, linelen, stderr); |
| if (ld->match != '+') continue; |
| buffer_pwrite(i, printptr, printlen); |
| } |
| |
| /* If we didn't see '\n' (long input line), */ |
| /* read/write repeatedly until we see it */ |
| while (ch != '\n') { |
| /* lineptr is emptied now, safe to use as buffer */ |
| taia_now(&now); |
| stdin_cnt = exitasap ? -1 : buffer_pread(0, lineptr, linemax, &now); |
| if (stdin_cnt <= 0) { /* EOF or error on stdin */ |
| exitasap = 1; |
| lineptr[0] = ch = '\n'; |
| linelen = 1; |
| stdin_cnt = 1; |
| } else { |
| linelen = stdin_cnt; |
| np = memRchr(lineptr, '\n', stdin_cnt); |
| if (np) |
| linelen = np - lineptr + 1; |
| ch = lineptr[linelen-1]; |
| } |
| /* linelen == no of chars incl. '\n' (or == stdin_cnt) */ |
| for (i = 0; i < dirn; ++i) { |
| if (dir[i].fddir == -1) continue; |
| if (dir[i].matcherr == 'e') |
| ////full_write(2, lineptr, linelen); |
| fwrite(lineptr, 1, linelen, stderr); |
| if (dir[i].match != '+') continue; |
| buffer_pwrite(i, lineptr, linelen); |
| } |
| } |
| |
| stdin_cnt -= linelen; |
| if (stdin_cnt > 0) { |
| lineptr += linelen; |
| /* If we see another '\n', we don't need to read |
| * next piece of input: can print what we have */ |
| np = memRchr(lineptr, '\n', stdin_cnt); |
| if (np) |
| goto print_to_nl; |
| /* Move unprocessed data to the front of line */ |
| memmove((timestamp ? line+26 : line), lineptr, stdin_cnt); |
| } |
| fflush(NULL);//// |
| } |
| |
| for (i = 0; i < dirn; ++i) { |
| if (dir[i].ppid) |
| while (!processorstop(&dir[i])) |
| /* repeat */; |
| logdir_close(&dir[i]); |
| } |
| return 0; |
| } |