| #define addgroup_trivial_usage \ |
| "[OPTIONS] group_name [user_name]" |
| #define addgroup_full_usage \ |
| "Adds a group to the system" \ |
| "Options:\n" \ |
| "\t-g\t\tspecify gid\n" |
| |
| #define adduser_trivial_usage \ |
| "[OPTIONS] user_name" |
| #define adduser_full_usage \ |
| "Adds a user to the system" \ |
| "Options:\n" \ |
| "\t-h\t\thome directory\n" \ |
| "\t-s\t\tshell\n" \ |
| "\t-g\t\tGECOS string\n" |
| |
| #define adjtimex_trivial_usage \ |
| "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" |
| #define adjtimex_full_usage \ |
| "Reads and optionally sets system timebase parameters.\n" \ |
| "See adjtimex(2).\n\n" \ |
| "Options:\n" \ |
| "\t-q\t\tquiet mode - do not print\n" \ |
| "\t-o offset\ttime offset, microseconds\n" \ |
| "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \ |
| "\t\t\t(positive values make the system clock run fast)\n" \ |
| "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \ |
| "\t-p timeconstant\n" |
| |
| #define ar_trivial_usage \ |
| "-[ov][ptx] ARCHIVE FILES" |
| #define ar_full_usage \ |
| "Extract or list FILES from an ar archive.\n\n" \ |
| "Options:\n" \ |
| "\t-o\t\tpreserve original dates\n" \ |
| "\t-p\t\textract to stdout\n" \ |
| "\t-t\t\tlist\n" \ |
| "\t-x\t\textract\n" \ |
| "\t-v\t\tverbosely list files processed\n" |
| |
| #define arping_trivial_usage \ |
| "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n" |
| #define arping_full_usage \ |
| "Ping hosts by ARP requests/replies.\n\n" \ |
| "Options:\n" \ |
| "\t-f\t\tQuit on first ARP reply\n" \ |
| "\t-q\t\tBe quiet\n" \ |
| "\t-b\t\tKeep broadcasting, don't go unicast\n" \ |
| "\t-D\t\tDuplicated address detection mode\n" \ |
| "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \ |
| "\t-A\t\tARP answer mode, update your neighbours\n" \ |
| "\t-c count\tStop after sending count ARP request packets\n" \ |
| "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \ |
| "\t-I device\tOutgoing interface name, default is eth0\n" \ |
| "\t-s sender\tSet specific sender IP address\n" \ |
| "\ttarget\t\tTarget IP address of ARP request\n" |
| |
| #define awk_trivial_usage \ |
| "[-v var=val][-F sep] { -f progname | 'programtext' } [FILE ...]" |
| #define awk_full_usage \ |
| "Options:\n" \ |
| "\t-v var=val\tassign value 'val' to variable 'var'\n" \ |
| "\t-F sep\t\tuse 'sep' as field separator\n" \ |
| "\t-f progname\tread program source from file 'progname'\n" |
| |
| #define basename_trivial_usage \ |
| "FILE [SUFFIX]" |
| #define basename_full_usage \ |
| "Strips directory path and suffixes from FILE.\n" \ |
| "If specified, also removes any trailing SUFFIX." |
| #define basename_example_usage \ |
| "$ basename /usr/local/bin/foo\n" \ |
| "foo\n" \ |
| "$ basename /usr/local/bin/\n" \ |
| "bin\n" \ |
| "$ basename /foo/bar.txt .txt\n" \ |
| "bar" |
| |
| #define bunzip2_trivial_usage \ |
| "[OPTION]... [FILE]" |
| #define bunzip2_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ |
| "Options:\n" \ |
| "\t-c\tWrite output to standard output\n" \ |
| "\t-f\tForce" |
| |
| #define bzcat_trivial_usage \ |
| "FILE" |
| #define bzcat_full_usage \ |
| "Uncompress to stdout." |
| |
| #define cal_trivial_usage \ |
| "[-jy] [[month] year]" |
| #define cal_full_usage \ |
| "Display a calendar.\n" \ |
| "\nOptions:\n" \ |
| "\t-j\tUse julian dates.\n" \ |
| "\t-y\tDisplay the entire year." |
| |
| #define cat_trivial_usage \ |
| "[FILE]..." |
| #define cat_full_usage \ |
| "Concatenates FILE(s) and prints them to stdout." |
| #define cat_example_usage \ |
| "$ cat /proc/uptime\n" \ |
| "110716.72 17.67" |
| |
| #define chgrp_trivial_usage \ |
| "[OPTION]... GROUP FILE..." |
| #define chgrp_full_usage \ |
| "Change the group membership of each FILE to GROUP.\n" \ |
| "\nOptions:\n" \ |
| "\t-R\tChanges files and directories recursively." |
| #define chgrp_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chgrp root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chmod_trivial_usage \ |
| "[-R] MODE[,MODE]... FILE..." |
| #define chmod_full_usage \ |
| "Each MODE is one or more of the letters ugoa, one of the\n" \ |
| "symbols +-= and one or more of the letters rwxst.\n\n" \ |
| "Options:\n" \ |
| "\t-R\tChanges files and directories recursively." |
| #define chmod_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chmod u+x /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ |
| "$ chmod 444 /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chown_trivial_usage \ |
| "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..." |
| #define chown_full_usage \ |
| "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \ |
| "\nOptions:\n" \ |
| "\t-R\tChanges files and directories recursively.\n" \ |
| "\t-h\tDo not dereference symbolic links." |
| #define chown_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root.root /tmp/foo\n" \ |
| "ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chroot_trivial_usage \ |
| "NEWROOT [COMMAND...]" |
| #define chroot_full_usage \ |
| "Run COMMAND with root directory set to NEWROOT." |
| #define chroot_example_usage \ |
| "$ ls -l /bin/ls\n" \ |
| "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ |
| "$ mount /dev/hdc1 /mnt -t minix\n" \ |
| "$ chroot /mnt\n" \ |
| "$ ls -l /bin/ls\n" \ |
| "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" |
| |
| #define chvt_trivial_usage \ |
| "N" |
| #define chvt_full_usage \ |
| "Changes the foreground virtual terminal to /dev/ttyN" |
| |
| #define clear_trivial_usage \ |
| "" |
| #define clear_full_usage \ |
| "Clear screen." |
| |
| #define cmp_trivial_usage \ |
| "FILE1 [FILE2]" |
| #define cmp_full_usage \ |
| "\t-s\tquiet mode - do not print\n" \ |
| "Compare files." |
| |
| #define cp_trivial_usage \ |
| "[OPTION]... SOURCE DEST" |
| #define cp_full_usage \ |
| "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \ |
| "\n" \ |
| "\t-a\tSame as -dpR\n" \ |
| "\t-d\tPreserves links\n" \ |
| "\t-p\tPreserves file attributes if possible\n" \ |
| "\t-f\tforce (implied; ignored) - always set\n" \ |
| "\t-R\tCopies directories recursively" |
| |
| #define cpio_trivial_usage \ |
| "-[dimtuv][F cpiofile]" |
| #define cpio_full_usage \ |
| "Extract or list files from a cpio archive\n" \ |
| "Main operation mode:\n" \ |
| "\td\t\tmake leading directories\n" \ |
| "\ti\t\textract\n" \ |
| "\tm\t\tpreserve mtime\n" \ |
| "\tt\t\tlist\n" \ |
| "\tu\t\tunconditional overwrite\n" \ |
| "\tF\t\tinput from file" |
| |
| #define crond_trivial_usage \ |
| "-d[#] -c <crondir> -f -b" |
| #define crond_full_usage \ |
| "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \ |
| "\t-d num\tdebug level\n" \ |
| "\t-l num\tlog level (8 - default)\n" \ |
| "\t-S\tlog to syslod (defualt)\n" \ |
| "\t-L file\tlog to file\n" \ |
| "\t-f\trun in fordeground\n" \ |
| "\t-b\trun in background (default)\n" \ |
| "\t-c dir\tworking dir" |
| |
| #define crontab_trivial_usage \ |
| "crontab [-c dir] {file|-}|[-u|-l|-e|-d user]" |
| #define crontab_full_usage \ |
| "\tfile <opts> replace crontab from file\n" \ |
| "\t- <opts> replace crontab from stdin\n" \ |
| "\t-u user specify user\n" \ |
| "\t-l [user] list crontab for user\n" \ |
| "\t-e [user] edit crontab for user\n" \ |
| "\t-d [user] delete crontab for user\n" \ |
| "\t-c dir specify crontab directory" |
| |
| |
| #define cut_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define cut_full_usage \ |
| "Prints selected fields from each input FILE to standard output.\n\n" \ |
| "Options:\n" \ |
| "\t-b LIST\t\tOutput only bytes from LIST\n" \ |
| "\t-c LIST\t\tOutput only characters from LIST\n" \ |
| "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \ |
| "\t-s\t\tOutput only the lines containing delimiter\n" \ |
| "\t-f N\t\tPrint only these fields\n" \ |
| "\t-n\t\tIgnored" |
| #define cut_example_usage \ |
| "$ echo "Hello world" | cut -f 1 -d ' '\n" \ |
| "Hello\n" \ |
| "$ echo "Hello world" | cut -f 2 -d ' '\n" \ |
| "world\n" |
| |
| #define date_trivial_usage \ |
| "[OPTION]... [+FORMAT]" |
| #define date_full_usage \ |
| "Displays the current time in the given FORMAT, or sets the system date.\n" \ |
| "\nOptions:\n" \ |
| "\t-R\t\tOutputs RFC-822 compliant date string\n" \ |
| "\t-d STRING\tdisplay time described by STRING, not `now'\n" \ |
| "\t-s\t\tSets time described by STRING\n" \ |
| "\t-u\t\tPrints or sets Coordinated Universal Time" |
| #define date_example_usage \ |
| "$ date\n" \ |
| "Wed Apr 12 18:52:41 MDT 2000\n" |
| |
| #define dc_trivial_usage \ |
| "expression ..." |
| #define dc_full_usage \ |
| "This is a Tiny RPN calculator that understands the\n" \ |
| "following operations: +, -, /, *, and, or, not, eor.\n" \ |
| "i.e., 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16" \ |
| "p - Prints the value on the top of the stack, without altering the stack.\n" \ |
| "f - Prints the entire contents of the stack without altering anything.\n" \ |
| "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \ |
| " Only 10 and 16 are supported.\n" |
| |
| #define dc_example_usage \ |
| "$ dc 2 2 +\n" \ |
| "4\n" \ |
| "$ dc 8 8 * 2 2 + /\n" \ |
| "16\n" \ |
| "$ dc 0 1 and\n" \ |
| "0\n" \ |
| "$ dc 0 1 or\n" \ |
| "1\n" \ |
| "$ echo 72 9 div 8 mul | dc\n" \ |
| "64\n" |
| |
| #define dd_trivial_usage \ |
| "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \ |
| "\t [seek=N] [conv=notrunc|noerror|sync]" |
| #define dd_full_usage \ |
| "Copy a file, converting and formatting according to options\n\n" \ |
| "\tif=FILE\t\tread from FILE instead of stdin\n" \ |
| "\tof=FILE\t\twrite to FILE instead of stdout\n" \ |
| "\tbs=N\t\tread and write N bytes at a time\n" \ |
| "\tcount=N\t\tcopy only N input blocks\n" \ |
| "\tskip=N\t\tskip N input blocks\n" \ |
| "\tseek=N\t\tskip N output blocks\n" \ |
| "\tconv=notrunc\tdon't truncate output file\n" \ |
| "\tconv=noerror\tcontinue after read errors\n" \ |
| "\tconv=sync\tpad blocks with zeros\n" \ |
| "\n" \ |
| "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ |
| "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)." |
| #define dd_example_usage \ |
| "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ |
| "4+0 records in\n" \ |
| "4+0 records out\n" |
| |
| #define deallocvt_trivial_usage \ |
| "N" |
| #define deallocvt_full_usage \ |
| "Deallocate unused virtual terminal /dev/ttyN" |
| |
| #define delgroup_trivial_usage \ |
| "GROUP" |
| #define delgroup_full_usage \ |
| "Deletes group GROUP from the system" |
| |
| #define deluser_trivial_usage \ |
| "USER" |
| #define deluser_full_usage \ |
| "Deletes user USER from the system" |
| |
| #ifdef CONFIG_FEATURE_HUMAN_READABLE |
| #define USAGE_HUMAN_READABLE(a) a |
| #define USAGE_NOT_HUMAN_READABLE(a) |
| #else |
| #define USAGE_HUMAN_READABLE(a) |
| #define USAGE_NOT_HUMAN_READABLE(a) a |
| #endif |
| #define df_trivial_usage \ |
| "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]" |
| #define df_full_usage \ |
| "Print the filesystem space used and space available.\n\n" \ |
| "Options:\n" \ |
| USAGE_HUMAN_READABLE( \ |
| "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ |
| "\t-m\tprint sizes in megabytes\n" \ |
| "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \ |
| "\n\t-k\tprint sizes in kilobytes(compatibility)") |
| #define df_example_usage \ |
| "$ df\n" \ |
| "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" \ |
| "/dev/sda1 64216 36364 27852 57% /boot\n" \ |
| "$ df /dev/sda3\n" \ |
| "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" |
| |
| #define dirname_trivial_usage \ |
| "[FILENAME ...]" |
| #define dirname_full_usage \ |
| "Strips non-directory suffix from FILENAME" |
| #define dirname_example_usage \ |
| "$ dirname /tmp/foo\n" \ |
| "/tmp\n" \ |
| "$ dirname /tmp/foo/\n" \ |
| "/tmp\n" |
| |
| #define dmesg_trivial_usage \ |
| "[-c] [-n LEVEL] [-s SIZE]" |
| #define dmesg_full_usage \ |
| "Prints or controls the kernel ring buffer\n\n" \ |
| "Options:\n" \ |
| "\t-c\t\tClears the ring buffer's contents after printing\n" \ |
| "\t-n LEVEL\tSets console logging level\n" \ |
| "\t-s SIZE\t\tUse a buffer of size SIZE" |
| |
| #define dos2unix_trivial_usage \ |
| "[option] [FILE]" |
| #define dos2unix_full_usage \ |
| "Converts FILE from dos format to unix format. When no option\n" \ |
| "is given, the input is converted to the opposite output format.\n" \ |
| "When no file is given, uses stdin for input and stdout for output.\n\n" \ |
| "Options:\n" \ |
| "\t-u\toutput will be in UNIX format\n" \ |
| "\t-d\toutput will be in DOS format" |
| |
| #define dpkg_trivial_usage \ |
| "-i package_file\n" \ |
| "[-CPru] package_name" |
| #define dpkg_full_usage \ |
| "\t-i\tInstall the package\n" \ |
| "\t-C\tConfigure an unpackaged package\n" \ |
| "\t-P\tPurge all files of a package\n" \ |
| "\t-r\tRemove all but the configuration files for a package\n" \ |
| "\t-u\tUnpack a package, but dont configure it\n" |
| |
| #define dpkg_deb_trivial_usage \ |
| "[-cefItxX] FILE [argument]" |
| #define dpkg_deb_full_usage \ |
| "Perform actions on debian packages (.debs)\n\n" \ |
| "Options:\n" \ |
| "\t-c\tList contents of filesystem tree\n" \ |
| "\t-e\tExtract control files to [argument] directory\n" \ |
| "\t-f\tDisplay control field name starting with [argument]\n" \ |
| "\t-I\tDisplay the control filenamed [argument]\n" \ |
| "\t-t\tExtract filesystem tree to stdout in tar format\n" \ |
| "\t-x\tExtract packages filesystem tree to directory\n" \ |
| "\t-X\tVerbose extract" |
| #define dpkg_deb_example_usage \ |
| "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" |
| |
| #define du_trivial_usage \ |
| "[-lsx" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILE]..." |
| #define du_full_usage \ |
| "Summarizes disk space used for each FILE and/or directory.\n" \ |
| "Disk space is printed in units of 1024 bytes.\n\n" \ |
| "Options:\n" \ |
| "\t-l\tcount sizes many times if hard linked\n" \ |
| "\t-s\tdisplay only a total for each argument" \ |
| USAGE_HUMAN_READABLE( \ |
| "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ |
| "\t-m\tprint sizes in megabytes\n" \ |
| "\t-x\tskip directories on different filesystems\n" \ |
| "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \ |
| "\n\t-k\tprint sizes in kilobytes(compatibility)") |
| #define du_example_usage \ |
| "$ du\n" \ |
| "16 ./CVS\n" \ |
| "12 ./kernel-patches/CVS\n" \ |
| "80 ./kernel-patches\n" \ |
| "12 ./tests/CVS\n" \ |
| "36 ./tests\n" \ |
| "12 ./scripts/CVS\n" \ |
| "16 ./scripts\n" \ |
| "12 ./docs/CVS\n" \ |
| "104 ./docs\n" \ |
| "2417 .\n" |
| |
| #define dumpkmap_trivial_usage \ |
| "> keymap" |
| #define dumpkmap_full_usage \ |
| "Prints out a binary keyboard translation table to standard output." |
| #define dumpkmap_example_usage \ |
| "$ dumpkmap > keymap\n" |
| |
| #define dumpleases_trivial_usage \ |
| "[-r|-a] [-f LEASEFILE]" |
| #define dumpleases_full_usage \ |
| "\t-f,\t--file=FILENAME\tLeases file to load\n" \ |
| "\t-r,\t--remaining\tInterepret lease times as time remaing\n" \ |
| "\t-a,\t--absolute\tInterepret lease times as expire time\n" |
| |
| #define dutmp_trivial_usage \ |
| "[FILE]" |
| #define dutmp_full_usage \ |
| "Dump utmp file format (pipe delimited) from FILE\n" \ |
| "or stdin to stdout. (i.e., 'dutmp /var/run/utmp')" |
| #define dutmp_example_usage \ |
| "$ dutmp /var/run/utmp\n" \ |
| "8|7||si|||0|0|0|955637625|760097|0\n" \ |
| "2|0|~|~~|reboot||0|0|0|955637625|782235|0\n" \ |
| "1|20020|~|~~|runlevel||0|0|0|955637625|800089|0\n" \ |
| "8|125||l4|||0|0|0|955637629|998367|0\n" \ |
| "6|245|tty1|1|LOGIN||0|0|0|955637630|998974|0\n" \ |
| "6|246|tty2|2|LOGIN||0|0|0|955637630|999498|0\n" \ |
| "7|336|pts/0|vt00andersen|andersen|:0.0|0|0|0|955637763|0|0\n" |
| |
| #define echo_trivial_usage \ |
| "[-neE] [ARG ...]" |
| #define echo_full_usage \ |
| "Prints the specified ARGs to stdout\n\n" \ |
| "Options:\n" \ |
| "\t-n\tsuppress trailing newline\n" \ |
| "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \ |
| "\t-E\tdisable interpretation of backslash-escaped characters" |
| #define echo_example_usage \ |
| "$ echo "Erik is cool"\n" \ |
| "Erik is cool\n" \ |
| "$ echo -e "Erik\\nis\\ncool"\n" \ |
| "Erik\n" \ |
| "is\n" \ |
| "cool\n" \ |
| "$ echo "Erik\\nis\\ncool"\n" \ |
| "Erik\\nis\\ncool\n" |
| |
| #define env_trivial_usage \ |
| "[-iu] [-] [name=value]... [command]" |
| #define env_full_usage \ |
| "Prints the current environment or runs a program after setting\n" \ |
| "up the specified environment.\n\n" \ |
| "Options:\n" \ |
| "\t-, -i\tstart with an empty environment\n" \ |
| "\t-u\tremove variable from the environment\n" |
| |
| #define expr_trivial_usage \ |
| "EXPRESSION" |
| #define expr_full_usage \ |
| "Prints the value of EXPRESSION to standard output.\n\n" \ |
| "EXPRESSION may be:\n" \ |
| "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ |
| "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ |
| "\tARG1 < ARG2 ARG1 is less than ARG2\n" \ |
| "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \ |
| "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \ |
| "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \ |
| "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \ |
| "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \ |
| "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \ |
| "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \ |
| "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \ |
| "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \ |
| "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \ |
| "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \ |
| "\tmatch STRING REGEXP same as STRING : REGEXP\n" \ |
| "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \ |
| "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \ |
| "\t or 0\n" \ |
| "\tlength STRING length of STRING\n" \ |
| "\tquote TOKEN interpret TOKEN as a string, even if\n" \ |
| "\t it is a keyword like `match' or an\n" \ |
| "\t operator like `/'\n" \ |
| "\t( EXPRESSION ) value of EXPRESSION\n\n" \ |
| "Beware that many operators need to be escaped or quoted for shells.\n" \ |
| "Comparisons are arithmetic if both ARGs are numbers, else\n" \ |
| "lexicographical. Pattern matches return the string matched between \n" \ |
| "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \ |
| "of characters matched or 0." |
| |
| #define false_trivial_usage \ |
| "" |
| #define false_full_usage \ |
| "Return an exit code of FALSE (1)." |
| #define false_example_usage \ |
| "$ false\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #define fbset_trivial_usage \ |
| "[options] [mode]" |
| #define fbset_full_usage \ |
| "Show and modify frame buffer settings" |
| #define fbset_example_usage \ |
| "$ fbset\n" \ |
| "mode "1024x768-76"\n" \ |
| "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ |
| "\tgeometry 1024 768 1024 768 16\n" \ |
| "\ttimings 12714 128 32 16 4 128 4\n" \ |
| "\taccel false\n" \ |
| "\trgba 5/11,6/5,5/0,0/0\n" \ |
| "endmode\n" |
| |
| #define fdflush_trivial_usage \ |
| "DEVICE" |
| #define fdflush_full_usage \ |
| "Forces floppy disk drive to detect disk change" |
| |
| #define fdisk_trivial_usage \ |
| "[-l] [-v] [-b SSZ] [-u] DISK" |
| #define fdisk_full_usage \ |
| "Change partition table\n" \ |
| "Options:\n" \ |
| "-l List partition table(s)\n" \ |
| "-u Give Start and End in sector (instead of cylinder) units\n" \ |
| "-s PARTITION Give partition size(s) in blocks\n" \ |
| "-b 2048: (for certain MO disks) use 2048-byte sectors\n" \ |
| "-v Give fdisk version" |
| |
| #ifdef CONFIG_FEATURE_FIND_TYPE |
| #define USAGE_FIND_TYPE(a) a |
| #else |
| #define USAGE_FIND_TYPE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_FIND_PERM |
| #define USAGE_FIND_PERM(a) a |
| #else |
| #define USAGE_FIND_PERM(a) |
| #endif |
| #ifdef CONFIG_FEATURE_FIND_MTIME |
| #define USAGE_FIND_MTIME(a) a |
| #else |
| #define USAGE_FIND_MTIME(a) |
| #endif |
| #ifdef CONFIG_FEATURE_FIND_NEWER |
| #define USAGE_FIND_NEWER(a) a |
| #else |
| #define USAGE_FIND_NEWER(a) |
| #endif |
| #ifdef CONFIG_FEATURE_FIND_INUM |
| #define USAGE_FIND_INUM(a) a |
| #else |
| #define USAGE_FIND_INUM(a) |
| #endif |
| |
| #define find_trivial_usage \ |
| "[PATH...] [EXPRESSION]" |
| #define find_full_usage \ |
| "Search for files in a directory hierarchy. The default PATH is\n" \ |
| "the current directory; default EXPRESSION is '-print'\n" \ |
| "\nEXPRESSION may consist of:\n" \ |
| "\t-follow\t\tDereference symbolic links.\n" \ |
| "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \ |
| "\t-print\t\tPrint (default and assumed).\n" \ |
| USAGE_FIND_TYPE( \ |
| "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \ |
| ) USAGE_FIND_PERM( \ |
| "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \ |
| ) USAGE_FIND_MTIME( \ |
| "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \ |
| ) USAGE_FIND_NEWER( \ |
| "\n\t-newer FILE\tModified time is more recent than FILE's" \ |
| ) USAGE_FIND_INUM( \ |
| "\n\t-inum N\t\tFile has inode number N") |
| #define find_example_usage \ |
| "$ find / -name /etc/passwd\n" \ |
| "/etc/passwd\n" |
| |
| #define free_trivial_usage \ |
| "" |
| #define free_full_usage \ |
| "Displays the amount of free and used system memory" |
| #define free_example_usage \ |
| "$ free\n" \ |
| " total used free shared buffers\n" \ |
| " Mem: 257628 248724 8904 59644 93124\n" \ |
| " Swap: 128516 8404 120112\n" \ |
| "Total: 386144 257128 129016\n" \ |
| |
| #define freeramdisk_trivial_usage \ |
| "DEVICE" |
| #define freeramdisk_full_usage \ |
| "Frees all memory used by the specified ramdisk." |
| #define freeramdisk_example_usage \ |
| "$ freeramdisk /dev/ram2\n" |
| |
| #define fsck_minix_trivial_usage \ |
| "[-larvsmf] /dev/name" |
| #define fsck_minix_full_usage \ |
| "Performs a consistency check for MINIX filesystems.\n\n" \ |
| "Options:\n" \ |
| "\t-l\tLists all filenames\n" \ |
| "\t-r\tPerform interactive repairs\n" \ |
| "\t-a\tPerform automatic repairs\n" \ |
| "\t-v\tverbose\n" \ |
| "\t-s\tOutputs super-block information\n" \ |
| "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \ |
| "\t-f\tForce file system check." |
| |
| #define ftpget_trivial_usage \ |
| "[options] remote-host local-directory remote-file" |
| #define ftpget_full_usage \ |
| "Retrieve a remote file via FTP.\n\n" \ |
| "Options:\n" \ |
| "\t-c, --continue Continue a previous transfer\n" \ |
| "\t-v, --verbose Verbose\n" \ |
| "\t-u, --username Username to be used\n" \ |
| "\t-p, --password Password to be used\n" \ |
| "\t-P, --port Port number to be used\n" |
| |
| #define ftpput_trivial_usage \ |
| "[options] remote-host remote-directory local-file" |
| #define ftpput_full_usage \ |
| "Store a local file on a remote machine via FTP.\n\n" \ |
| "Options:\n" \ |
| "\t-v, --verbose Verbose\n" \ |
| "\t-u, --username Username to be used\n" \ |
| "\t-p, --password Password to be used\n" \ |
| "\t-P, --port Port number to be used\n" |
| |
| #define getopt_trivial_usage \ |
| "[OPTIONS]..." |
| #define getopt_full_usage \ |
| "Parse command options\n" \ |
| "\t-a, --alternative Allow long options starting with single -\n" \ |
| "\t-l, --longoptions=longopts Long options to be recognized\n" \ |
| "\t-n, --name=progname The name under which errors are reported\n" \ |
| "\t-o, --options=optstring Short options to be recognized\n" \ |
| "\t-q, --quiet Disable error reporting by getopt(3)\n" \ |
| "\t-Q, --quiet-output No normal output\n" \ |
| "\t-s, --shell=shell Set shell quoting conventions\n" \ |
| "\t-T, --test Test for getopt(1) version\n" \ |
| "\t-u, --unqote Do not quote the output" |
| #define getopt_example_usage \ |
| "$ cat getopt.test\n" \ |
| "#!/bin/sh\n" \ |
| "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ |
| " -n 'example.busybox' -- "$@"`\n" \ |
| "if [ $? != 0 ] ; then exit 1 ; fi\n" \ |
| "eval set -- "$GETOPT"\n" \ |
| "while true ; do\n" \ |
| " case $1 in\n" \ |
| " -a|--a-long) echo \"Option a\" ; shift ;;\n" \ |
| " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \ |
| " -c|--c-long)\n" \ |
| " case "$2" in\n" \ |
| " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \ |
| " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \ |
| " esac ;;\n" \ |
| " --) shift ; break ;;\n" \ |
| " *) echo \"Internal error!\" ; exit 1 ;;\n" \ |
| " esac\n" \ |
| "done\n" |
| |
| #define getty_trivial_usage \ |
| "getty [OPTIONS]... baud_rate,... line [termtype]" |
| #define getty_full_usage \ |
| "\nOpens a tty, prompts for a login name, then invokes /bin/login\n\n" \ |
| "Options:\n" \ |
| "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \ |
| "\t-i\t\tDo not display /etc/issue before running login.\n" \ |
| "\t-L\t\tLocal line, so do not do carrier detect.\n" \ |
| "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \ |
| "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \ |
| "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \ |
| "\t-t timeout\tTerminate after timeout if no username is read.\n" \ |
| "\t-I initstring\tSets the init string to send before anything else.\n" \ |
| "\t-H login_host\tLog login_host into the utmp file as the hostname." |
| |
| |
| #define grep_trivial_usage \ |
| "[-ihHnqvs] PATTERN [FILEs...]" |
| #define grep_full_usage \ |
| "Search for PATTERN in each FILE or standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-H\tprefix output lines with filename where match was found\n" \ |
| "\t-h\tsuppress the prefixing filename on output\n" \ |
| "\t-i\tignore case distinctions\n" \ |
| "\t-l\tlist names of files that match\n" \ |
| "\t-n\tprint line number with output lines\n" \ |
| "\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \ |
| "\t-v\tselect non-matching lines\n" \ |
| "\t-s\tsuppress file open/read error messages" |
| #define grep_example_usage \ |
| "$ grep root /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "$ grep ^[rR]oo. /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" |
| |
| #define gunzip_trivial_usage \ |
| "[OPTION]... FILE" |
| #define gunzip_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-').\n\n" \ |
| "Options:\n" \ |
| "\t-c\tWrite output to standard output\n" \ |
| "\t-t\tTest compressed file integrity" |
| #define gunzip_example_usage \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" |
| |
| #define gzip_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define gzip_full_usage \ |
| "Compress FILE(s) with maximum compression.\n" \ |
| "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \ |
| "Options:\n" \ |
| "\t-c\tWrite output to standard output instead of FILE.gz\n" \ |
| "\t-d\tdecompress" |
| #define gzip_example_usage \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ |
| "$ gzip /tmp/busybox.tar\n" \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" |
| |
| #define halt_trivial_usage \ |
| "" |
| #define halt_full_usage \ |
| "Halt the system." |
| |
| #define head_trivial_usage \ |
| "[OPTION] [FILE]..." |
| #define head_full_usage \ |
| "Print first 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-n NUM\t\tPrint first NUM lines instead of first 10" |
| #define head_example_usage \ |
| "$ head -n 2 /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" |
| |
| #define hexdump_trivial_usage \ |
| "[-[bcdefnosvx]] [OPTION] FILE" |
| #define hexdump_full_usage \ |
| "The hexdump utility is a filter which displays the specified files,\n" \ |
| "or the standard input, if no files are specified, in a user specified\n"\ |
| "format\n" \ |
| "\t-b\t\tOne-byte octal display\n" \ |
| "\t-c\t\tOne-byte character display\n" \ |
| "\t-d\t\tTwo-byte decimal display\n" \ |
| "\t-e FORMAT STRING\n" \ |
| "\t-f FORMAT FILE\n" \ |
| "\t-n LENGTH\tInterpret only length bytes of input\n" \ |
| "\t-o\t\tTwo-byte octal display\n" \ |
| "\t-s OFFSET\tSkip offset byte\n" \ |
| "\t-v\t\tdisplay all input data\n" \ |
| "\t-x\t\tTwo-byte hexadecimal display\n" |
| |
| #define hostid_trivial_usage \ |
| "" |
| #define hostid_full_usage \ |
| "Print out a unique 32-bit identifier for the machine." |
| |
| #define hostname_trivial_usage \ |
| "[OPTION] {hostname | -F FILE}" |
| #define hostname_full_usage \ |
| "Get or set the hostname or DNS domain name. If a hostname is given\n" \ |
| "(or FILE with the -F parameter), the host name will be set.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tShort\n" \ |
| "\t-i\tAddresses for the hostname\n" \ |
| "\t-d\tDNS domain name\n" \ |
| "\t-f\tFully qualified domain name\n" \ |
| "\t-F FILE\tUse the contents of FILE to specify the hostname" |
| #define hostname_example_usage \ |
| "$ hostname\n" \ |
| "sage \n" |
| #ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH |
| #define USAGE_HTTPD_BASIC_AUTH(a) a |
| #else |
| #define USAGE_HTTPD_BASIC_AUTH(a) |
| #endif |
| #define httpd_trivial_usage \ |
| "[-p <port>] [-d/-e <string>]" USAGE_HTTPD_BASIC_AUTH(" [-c <conf file>] [-r <realm>]") |
| #define httpd_full_usage \ |
| "Listens for incoming http server requests.\n"\ |
| "Options:\n" \ |
| "\t-p PORT\tServer port (default 80).\n" \ |
| USAGE_HTTPD_BASIC_AUTH("\t-c FILE\tSpecifies configuration file. (default httpd.conf)\n\t-r REALM\tAuthentication Realm for Basic Authentication\n") \ |
| "\t-e STRING\tHtml encode STRING\n" \ |
| "\t-d STRING\tURL decode STRING\n" |
| #define hwclock_trivial_usage \ |
| "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]" |
| #define hwclock_full_usage \ |
| "Query and set the hardware clock (RTC)\n\n" \ |
| "Options:\n" \ |
| "\t-r\tread hardware clock and print result\n" \ |
| "\t-s\tset the system time from the hardware clock\n" \ |
| "\t-w\tset the hardware clock to the current system time\n" \ |
| "\t-u\tthe hardware clock is kept in coordinated universal time\n" \ |
| "\t-l\tthe hardware clock is kept in local time" |
| |
| #define id_trivial_usage \ |
| "[OPTIONS]... [USERNAME]" |
| #define id_full_usage \ |
| "Print information for USERNAME or the current user\n\n" \ |
| "Options:\n" \ |
| "\t-g\tprints only the group ID\n" \ |
| "\t-u\tprints only the user ID\n" \ |
| "\t-n\tprint a name instead of a number (with for -ug)\n" \ |
| "\t-r\tprints the real user ID instead of the effective ID (with -ug)" |
| #define id_example_usage \ |
| "$ id\n" \ |
| "uid=1000(andersen) gid=1000(andersen)\n" |
| |
| #ifdef CONFIG_FEATURE_IFCONFIG_SLIP |
| #define USAGE_SIOCSKEEPALIVE(a) a |
| #else |
| #define USAGE_SIOCSKEEPALIVE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ |
| #define USAGE_IFCONFIG_MII(a) a |
| #else |
| #define USAGE_IFCONFIG_MII(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IFCONFIG_HW |
| #define USAGE_IFCONFIG_HW(a) a |
| #else |
| #define USAGE_IFCONFIG_HW(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IFCONFIG_STATUS |
| #define USAGE_IFCONFIG_OPT_A(a) a |
| #else |
| #define USAGE_IFCONFIG_OPT_A(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IPV6 |
| #define USAGE_IPV6(a) a |
| #else |
| #define USAGE_IPV6(a) |
| #endif |
| |
| #define ifconfig_trivial_usage \ |
| USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]" |
| #define ifconfig_full_usage \ |
| "configure a network interface\n\n" \ |
| "Options:\n" \ |
| USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \ |
| USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \ |
| "\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \ |
| "\t[netmask <address>] [dstaddr <address>]\n" \ |
| USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \ |
| "\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \ |
| "[metric <NN>] [mtu <NN>]\n" \ |
| "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \ |
| "\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \ |
| USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \ |
| "\t[up|down] ..." |
| |
| #define ifup_trivial_usage \ |
| "<-ahinv> <ifaces...>" |
| #define ifup_full_usage \ |
| "Usage: ifup <options> <ifaces...>\n\n" \ |
| "Options:\n" \ |
| "\t-h\tthis help\n" \ |
| "\t-a\tde/configure all interfaces automatically\n" \ |
| "\t-i FILE\tuse FILE for interface definitions\n" \ |
| "\t-n\tprint out what would happen, but don't do it\n" \ |
| "\t\t\t(note that this option doesn't disable mappings)\n" \ |
| "\t-v\tprint out what would happen before doing it\n" \ |
| "\t-m\tdon't run any mappings\n" \ |
| "\t-f\tforce de/configuration\n" |
| |
| #define ifdown_trivial_usage \ |
| "<-ahinv> <ifaces...>" |
| #define ifdown_full_usage \ |
| "Usage: ifdown <options> <ifaces...>\n\n" \ |
| "Options:\n" \ |
| "\t-h\tthis help\n" \ |
| "\t-a\tde/configure all interfaces automatically\n" \ |
| "\t-i FILE\tuse FILE for interface definitions\n" \ |
| "\t-n\tprint out what would happen, but don't do it\n" \ |
| "\t\t(note that this option doesn't disable mappings)\n" \ |
| "\t-v\tprint out what would happen before doing it\n" \ |
| "\t-m\tdon't run any mappings\n" \ |
| "\t-f\tforce de/configuration\n" |
| |
| #define inetd_trivial_usage \ |
| "[-q len] [conf]" |
| #define inetd_full_usage \ |
| "Usage: [-q len] [conf]\n\n" \ |
| "Option:\n" \ |
| "\t-q\tSets the size of the socket listen queue to\n" \ |
| "the specified value. Default is 128." |
| |
| #define init_trivial_usage \ |
| "" |
| #define init_full_usage \ |
| "Init is the parent of all processes." |
| #define init_notes_usage \ |
| "This version of init is designed to be run only by the kernel.\n" \ |
| "\n" \ |
| "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ |
| "the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \ |
| "runlevels, use sysvinit.\n" \ |
| "\n" \ |
| "BusyBox init works just fine without an inittab. If no inittab is found, \n" \ |
| "it has the following default behavior:\n" \ |
| "\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " ::askfirst:/bin/sh\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::restart:/sbin/init\n" \ |
| "\n" \ |
| "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ |
| "\n" \ |
| " tty2::askfirst:/bin/sh\n" \ |
| " tty3::askfirst:/bin/sh\n" \ |
| " tty4::askfirst:/bin/sh\n" \ |
| "\n" \ |
| "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ |
| "\n" \ |
| " <id>:<runlevels>:<action>:<process>\n" \ |
| "\n" \ |
| " <id>: \n" \ |
| "\n" \ |
| " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ |
| " The id field is used by BusyBox init to specify the controlling tty for\n" \ |
| " the specified process to run on. The contents of this field are\n" \ |
| " appended to "/dev/" and used as-is. There is no need for this field to\n" \ |
| " be unique, although if it isn't you may have strange results. If this\n" \ |
| " field is left blank, the controlling tty is set to the console. Also\n" \ |
| " note that if BusyBox detects that a serial console is in use, then only\n" \ |
| " entries whose controlling tty is either the serial console or /dev/null\n" \ |
| " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ |
| " stinkin' utmp.\n" \ |
| "\n" \ |
| " <runlevels>: \n" \ |
| "\n" \ |
| " The runlevels field is completely ignored.\n" \ |
| "\n" \ |
| " <action>: \n" \ |
| "\n" \ |
| " Valid actions include: sysinit, respawn, askfirst, wait, \n" \ |
| " once, restart, ctrlaltdel, and shutdown.\n" \ |
| "\n" \ |
| " The available actions can be classified into two groups: actions\n" \ |
| " that are run only once, and actions that are re-run when the specified\n" \ |
| " process exits.\n" \ |
| "\n" \ |
| " Run only-once actions:\n" \ |
| "\n" \ |
| " 'sysinit' is the first item run on boot. init waits until all\n" \ |
| " sysinit actions are completed before continuing. Following the\n" \ |
| " completion of all sysinit actions, all 'wait' actions are run.\n" \ |
| " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ |
| " the specified task completes. 'once' actions are asynchronous,\n" \ |
| " therefore, init does not wait for them to complete. 'restart' is\n" \ |
| " the action taken to restart the init process. By default this should\n" \ |
| " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ |
| " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ |
| " actions are run when the system detects that someone on the system\n" \ |
| " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ |
| " wants to run 'reboot' at this point to cause the system to reboot.\n" \ |
| " Finally the 'shutdown' action specifies the actions to taken when\n" \ |
| " init is told to reboot. Unmounting filesystems and disabling swap\n" \ |
| " is a very good here\n" \ |
| "\n" \ |
| " Run repeatedly actions:\n" \ |
| "\n" \ |
| " 'respawn' actions are run after the 'once' actions. When a process\n" \ |
| " started with a 'respawn' action exits, init automatically restarts\n" \ |
| " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ |
| " respawning out of control. The 'askfirst' actions acts just like\n" \ |
| " respawn, except that before running the specified process it\n" \ |
| " displays the line "Please press Enter to activate this console."\n" \ |
| " and then waits for the user to press enter before starting the\n" \ |
| " specified process. \n" \ |
| "\n" \ |
| " Unrecognized actions (like initdefault) will cause init to emit an\n" \ |
| " error message, and then go along with its business. All actions are\n" \ |
| " run in the order they appear in /etc/inittab.\n" \ |
| "\n" \ |
| " <process>: \n" \ |
| "\n" \ |
| " Specifies the process to be executed and it's command line.\n" \ |
| "\n" \ |
| "Example /etc/inittab file:\n" \ |
| "\n" \ |
| " # This is run first except when booting in single-user mode.\n" \ |
| " #\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " \n" \ |
| " # /bin/sh invocations on selected ttys\n" \ |
| " #\n" \ |
| " # Start an "askfirst" shell on the console (whatever that may be)\n" \ |
| " ::askfirst:-/bin/sh\n" \ |
| " # Start an "askfirst" shell on /dev/tty2-4\n" \ |
| " tty2::askfirst:-/bin/sh\n" \ |
| " tty3::askfirst:-/bin/sh\n" \ |
| " tty4::askfirst:-/bin/sh\n" \ |
| " \n" \ |
| " # /sbin/getty invocations for selected ttys\n" \ |
| " #\n" \ |
| " tty4::respawn:/sbin/getty 38400 tty4\n" \ |
| " tty5::respawn:/sbin/getty 38400 tty5\n" \ |
| " \n" \ |
| " \n" \ |
| " # Example of how to put a getty on a serial line (for a terminal)\n" \ |
| " #\n" \ |
| " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ |
| " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ |
| " #\n" \ |
| " # Example how to put a getty on a modem line.\n" \ |
| " #::respawn:/sbin/getty 57600 ttyS2\n" \ |
| " \n" \ |
| " # Stuff to do when restarting the init process\n" \ |
| " ::restart:/sbin/init\n" \ |
| " \n" \ |
| " # Stuff to do before rebooting\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" |
| |
| #ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP |
| #define USAGE_INSMOD_MAP(a) a |
| #else |
| #define USAGE_INSMOD_MAP(a) |
| #endif |
| #define insmod_trivial_usage \ |
| "[OPTION]... MODULE [symbol=value]..." |
| #define insmod_full_usage \ |
| "Loads the specified kernel modules into the kernel.\n\n" \ |
| "Options:\n" \ |
| "\t-f\tForce module to load into the wrong kernel version.\n" \ |
| "\t-k\tMake module autoclean-able.\n" \ |
| "\t-v\tverbose output\n" \ |
| "\t-L\tLock to prevent simultaneous loads of a module\n" \ |
| USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout") \ |
| "\t-x\tdo not export externs\n" |
| |
| #define ip_trivial_usage \ |
| "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }" |
| #define ip_full_usage \ |
| "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \ |
| "where OBJECT := { link | addr | route | tunnel }\n" \ |
| "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n" |
| |
| #define ipaddr_trivial_usage \ |
| "{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }" |
| #define ipaddr_full_usage \ |
| "ipaddr {add|del} IFADDR dev STRING\n" \ |
| "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \ |
| " [ to PREFIX ] [ label PATTERN ]\n" \ |
| "IFADDR := PREFIX | ADDR peer PREFIX\n" \ |
| " [ broadcast ADDR ] [ anycast ADDR ]\n" \ |
| " [ label STRING ] [ scope SCOPE-ID ]\n" \ |
| "SCOPE-ID := [ host | link | global | NUMBER ]\n" |
| |
| #ifndef CONFIG_FEATURE_IPCALC_FANCY |
| # define ipcalc_trivial_usage \ |
| "[--broadcast] [--netmask] [--network] ipaddr <netmask>" |
| |
| # define ipcalc_full_usage \ |
| "Calculate IP network settings from a IP address\n\n" \ |
| "Options:\n" \ |
| "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \ |
| "\t-n\t--netmask\tDisplay default netmask for IP.\n" \ |
| "\t-w\t--network\tDisplay calculated network address." |
| #else |
| # define ipcalc_trivial_usage \ |
| "[OPTION]... ipaddr <netmask>" |
| |
| # define ipcalc_full_usage \ |
| "Calculate IP network settings from a IP address\n\n" \ |
| "Options:\n" \ |
| "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \ |
| "\t-n\t--netmask\tDisplay default netmask for IP.\n" \ |
| "\t-w\t--network\tDisplay calculated network address.\n" \ |
| "\t-h\t--hostname\tDisplay first resolved host name.\n" \ |
| "\t-s\t--silent\tDon't ever display error messages." |
| #endif |
| |
| #define ipcalc_notes_usage \ |
| "ipcalc provides a simple way to calculate IP information for\n" \ |
| "a host. The various options specify what information ipcalc\n" \ |
| "should display on standard out. Multiple options may be\n" \ |
| "specified.\n" |
| |
| #define iplink_trivial_usage \ |
| "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }" |
| #define iplink_full_usage \ |
| "iplink set DEVICE { up | down | arp { on | off } |\n" \ |
| " dynamic { on | off } |\n" \ |
| " mtu MTU }\n" \ |
| "iplink show [ DEVICE ]\n" |
| |
| #define iproute_trivial_usage \ |
| "{ list | flush | { add | del | change | append | replace | monitor } ROUTE }" |
| #define iproute_full_usage \ |
| "iproute { list | flush } SELECTOR\n" \ |
| "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \ |
| " [ oif STRING ] [ tos TOS ]\n" \ |
| "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ |
| "SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \ |
| "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n" |
| |
| #define iptunnel_trivial_usage \ |
| "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]" |
| #define iptunnel_full_usage \ |
| "iptunnel { add | change | del | show } [ NAME ]\n" \ |
| " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \ |
| " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \ |
| " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n" |
| |
| #define kill_trivial_usage \ |
| "[-signal] process-id [process-id ...]" |
| #define kill_full_usage \ |
| "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\ |
| "Options:\n" \ |
| "\t-l\tList all signal names and numbers." |
| #define kill_example_usage \ |
| "$ ps | grep apache\n" \ |
| "252 root root S [apache]\n" \ |
| "263 www-data www-data S [apache]\n" \ |
| "264 www-data www-data S [apache]\n" \ |
| "265 www-data www-data S [apache]\n" \ |
| "266 www-data www-data S [apache]\n" \ |
| "267 www-data www-data S [apache]\n" \ |
| "$ kill 252\n" |
| |
| #define killall_trivial_usage \ |
| "[-signal] process-name [process-name ...]" |
| #define killall_full_usage \ |
| "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\ |
| "Options:\n" \ |
| "\t-l\tList all signal names and numbers." |
| #define killall_example_usage \ |
| "$ killall apache\n" |
| |
| #define klogd_trivial_usage \ |
| "[-c n] [-n]" |
| #define klogd_full_usage \ |
| "Kernel logger.\n"\ |
| "Options:\n"\ |
| "\t-c n\tSets the default log level of console messages to n.\n"\ |
| "\t-n\tRun as a foreground process." |
| |
| #define length_trivial_usage \ |
| "STRING" |
| #define length_full_usage \ |
| "Prints out the length of the specified STRING." |
| #define length_example_usage \ |
| "$ length Hello\n" \ |
| "5\n" |
| |
| #define ln_trivial_usage \ |
| "[OPTION] TARGET... LINK_NAME|DIRECTORY" |
| #define ln_full_usage \ |
| "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\ |
| "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tmake symbolic links instead of hard links\n" \ |
| "\t-f\tremove existing destination files\n" \ |
| "\t-n\tno dereference symlinks - treat like normal file" |
| #define ln_example_usage \ |
| "$ ln -s BusyBox /tmp/ls\n" \ |
| "$ ls -l /tmp/ls\n" \ |
| "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" |
| |
| #define loadacm_trivial_usage \ |
| "< mapfile" |
| #define loadacm_full_usage \ |
| "Loads an acm from standard input." |
| #define loadacm_example_usage \ |
| "$ loadacm < /etc/i18n/acmname\n" |
| |
| #define loadfont_trivial_usage \ |
| "< font" |
| #define loadfont_full_usage \ |
| "Loads a console font from standard input." |
| #define loadfont_example_usage \ |
| "$ loadfont < /etc/i18n/fontname\n" |
| |
| #define loadkmap_trivial_usage \ |
| "< keymap" |
| #define loadkmap_full_usage \ |
| "Loads a binary keyboard translation table from standard input." |
| #define loadkmap_example_usage \ |
| "$ loadkmap < /etc/i18n/lang-keymap\n" |
| |
| #define logger_trivial_usage \ |
| "[OPTION]... [MESSAGE]" |
| #define logger_full_usage \ |
| "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tLog to stderr as well as the system log.\n" \ |
| "\t-t\tLog using the specified tag (defaults to user name).\n" \ |
| "\t-p\tEnter the message with the specified priority.\n" \ |
| "\t\tThis may be numerical or a ``facility.level'' pair." |
| #define logger_example_usage \ |
| "$ logger "hello"\n" |
| |
| #define login_trivial_usage \ |
| "[OPTION]... [username] [ENV=VAR ...]" |
| #define login_full_usage \ |
| "Begin a new session on the system\n\n" \ |
| "Options:\n" \ |
| "\t-f\tDo not authenticate (user already authenticated)\n" \ |
| "\t-h\tName of the remote host for this login.\n" \ |
| "\t-p\tPreserve environment." |
| |
| #define logname_trivial_usage \ |
| "" |
| #define logname_full_usage \ |
| "Print the name of the current user." |
| #define logname_example_usage \ |
| "$ logname\n" \ |
| "root\n" |
| |
| #define logread_trivial_usage \ |
| "" |
| |
| #define logread_full_usage \ |
| "Shows the messages from syslogd (using circular buffer)." |
| |
| #define losetup_trivial_usage \ |
| "[OPTION]... LOOPDEVICE FILE\n" \ |
| "or: losetup [OPTION]... -d LOOPDEVICE" |
| #define losetup_full_usage \ |
| "Associate LOOPDEVICE with FILE.\n\n" \ |
| "Options:\n" \ |
| "\t-d\t\tDisassociate LOOPDEVICE.\n" \ |
| "\t-o OFFSET\tStart OFFSET bytes into FILE.\n" |
| |
| #ifdef CONFIG_FEATURE_LS_TIMESTAMPS |
| #define USAGE_LS_TIMESTAMPS(a) a |
| #else |
| #define USAGE_LS_TIMESTAMPS(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_FILETYPES |
| #define USAGE_LS_FILETYPES(a) a |
| #else |
| #define USAGE_LS_FILETYPES(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_FOLLOWLINKS |
| #define USAGE_LS_FOLLOWLINKS(a) a |
| #else |
| #define USAGE_LS_FOLLOWLINKS(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_RECURSIVE |
| #define USAGE_LS_RECURSIVE(a) a |
| #else |
| #define USAGE_LS_RECURSIVE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_SORTFILES |
| #define USAGE_LS_SORTFILES(a) a |
| #else |
| #define USAGE_LS_SORTFILES(a) |
| #endif |
| #ifdef CONFIG_FEATURE_AUTOWIDTH |
| #define USAGE_AUTOWIDTH(a) a |
| #else |
| #define USAGE_AUTOWIDTH(a) |
| #endif |
| #define ls_trivial_usage \ |
| "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k] [filenames...]" |
| #define ls_full_usage \ |
| "List directory contents\n\n" \ |
| "Options:\n" \ |
| "\t-1\tlist files in a single column\n" \ |
| "\t-A\tdo not list implied . and ..\n" \ |
| "\t-a\tdo not hide entries starting with .\n" \ |
| "\t-C\tlist entries by columns\n" \ |
| USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \ |
| "\t-d\tlist directory entries instead of contents\n" \ |
| USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \ |
| USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \ |
| "\t-i\tlist the i-node for each file\n" \ |
| "\t-l\tuse a long listing format\n" \ |
| "\t-n\tlist numeric UIDs and GIDs instead of names\n" \ |
| USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \ |
| USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \ |
| USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \ |
| USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \ |
| USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \ |
| "\t-s\tlist the size of each file, in blocks\n" \ |
| USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \ |
| USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \ |
| USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \ |
| USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \ |
| USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \ |
| "\t-x\tlist entries by lines instead of by columns\n" \ |
| USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \ |
| USAGE_HUMAN_READABLE( \ |
| "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ |
| "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \ |
| "\t-k\tprint sizes in kilobytes(compatibility)") |
| |
| #define lsmod_trivial_usage \ |
| "" |
| #define lsmod_full_usage \ |
| "List the currently loaded kernel modules." |
| |
| #define makedevs_trivial_usage \ |
| "NAME TYPE MAJOR MINOR FIRST LAST [s]" |
| #define makedevs_full_usage \ |
| "Creates a range of block or character special files\n\n" \ |
| "TYPEs include:\n" \ |
| "\tb:\tMake a block (buffered) device.\n" \ |
| "\tc or u:\tMake a character (un-buffered) device.\n" \ |
| "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \ |
| "FIRST specifies the number appended to NAME to create the first device.\n" \ |
| "LAST specifies the number of the last item that should be created.\n" \ |
| "If 's' is the last argument, the base device is created as well.\n\n" \ |
| "For example:\n" \ |
| "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ |
| "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" |
| #define makedevs_example_usage \ |
| "$ makedevs /dev/ttyS c 4 66 2 63\n" \ |
| "[creates ttyS2-ttyS63]\n" \ |
| "$ makedevs /dev/hda b 3 0 0 8 s\n" \ |
| "[creates hda,hda1-hda8]\n" |
| |
| #define md5sum_trivial_usage \ |
| "[OPTION] [FILE]...\n" \ |
| "or: md5sum [OPTION] -c [FILE]" |
| #define md5sum_full_usage \ |
| "Print or check MD5 checksums.\n\n" \ |
| "Options:\n" \ |
| "With no FILE, or when FILE is -, read standard input.\n\n" \ |
| "\t-b\tread files in binary mode\n" \ |
| "\t-c\tcheck MD5 sums against given list\n" \ |
| "\t-t\tread files in text mode (default)\n" \ |
| "\t-g\tread a string\n" \ |
| "\nThe following two options are useful only when verifying checksums:\n" \ |
| "\t-s\tdon't output anything, status code shows success\n" \ |
| "\t-w\twarn about improperly formated MD5 checksum lines" |
| #define md5sum_example_usage \ |
| "$ md5sum < busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003\n" \ |
| "$ md5sum busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "$ md5sum -c -\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "busybox: OK\n" \ |
| "^D\n" |
| |
| #define mesg_trivial_usage \ |
| "mesg [y|n]" |
| #define mesg_full_usage \ |
| "mesg [Y|N], controls write access to your terminal\n" \ |
| "\ty\tAllow write access to your terminal.\n" \ |
| "\tn\tDisallow write access to your terminal.\n" |
| |
| #define mkdir_trivial_usage \ |
| "[OPTION] DIRECTORY..." |
| #define mkdir_full_usage \ |
| "Create the DIRECTORY(ies) if they do not already exist\n\n" \ |
| "Options:\n" \ |
| "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \ |
| "\t-p\tno error if existing, make parent directories as needed" |
| #define mkdir_example_usage \ |
| "$ mkdir /tmp/foo\n" \ |
| "$ mkdir /tmp/foo\n" \ |
| "/tmp/foo: File exists\n" \ |
| "$ mkdir /tmp/foo/bar/baz\n" \ |
| "/tmp/foo/bar/baz: No such file or directory\n" \ |
| "$ mkdir -p /tmp/foo/bar/baz\n" |
| |
| #define mkfifo_trivial_usage \ |
| "[OPTIONS] name" |
| #define mkfifo_full_usage \ |
| "Creates a named pipe (identical to 'mknod name p')\n\n" \ |
| "Options:\n" \ |
| "\t-m\tcreate the pipe using the specified mode (default a=rw)" |
| |
| #define mkfs_minix_trivial_usage \ |
| "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" |
| #define mkfs_minix_full_usage \ |
| "Make a MINIX filesystem.\n\n" \ |
| "Options:\n" \ |
| "\t-c\t\tCheck the device for bad blocks\n" \ |
| "\t-n [14|30]\tSpecify the maximum length of filenames\n" \ |
| "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \ |
| "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \ |
| "\t-v\t\tMake a Minix version 2 filesystem" |
| |
| #define mknod_trivial_usage \ |
| "[OPTIONS] NAME TYPE MAJOR MINOR" |
| #define mknod_full_usage \ |
| "Create a special file (block, character, or pipe).\n\n" \ |
| "Options:\n" \ |
| "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \ |
| "TYPEs include:\n" \ |
| "\tb:\tMake a block (buffered) device.\n" \ |
| "\tc or u:\tMake a character (un-buffered) device.\n" \ |
| "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes." |
| #define mknod_example_usage \ |
| "$ mknod /dev/fd0 b 2 0 \n" \ |
| "$ mknod -m 644 /tmp/pipe p\n" |
| |
| #define mkswap_trivial_usage \ |
| "[-c] [-v0|-v1] device [block-count]" |
| #define mkswap_full_usage \ |
| "Prepare a disk partition to be used as a swap partition.\n\n" \ |
| "Options:\n" \ |
| "\t-c\t\tCheck for read-ability.\n" \ |
| "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \ |
| "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \ |
| "\tblock-count\tNumber of block to use (default is entire partition)." |
| |
| #define mktemp_trivial_usage \ |
| "[-q] TEMPLATE" |
| #define mktemp_full_usage \ |
| "Creates a temporary file with its name based on TEMPLATE.\n" \ |
| "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX)." |
| #define mktemp_example_usage \ |
| "$ mktemp /tmp/temp.XXXXXX\n" \ |
| "/tmp/temp.mWiLjM\n" \ |
| "$ ls -la /tmp/temp.mWiLjM\n" \ |
| "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" |
| |
| #define modprobe_trivial_usage \ |
| "[FILE ...]" |
| #define modprobe_full_usage \ |
| "Used for high level module loading and unloading." |
| #define modprobe_example_usage \ |
| "$ modprobe cdrom\n" |
| |
| #define more_trivial_usage \ |
| "[FILE ...]" |
| #define more_full_usage \ |
| "More is a filter for viewing FILE one screenful at a time." |
| #define more_example_usage \ |
| "$ dmesg | more\n" |
| |
| #ifdef CONFIG_FEATURE_MOUNT_LOOP |
| #define USAGE_MOUNT_LOOP(a) a |
| #else |
| #define USAGE_MOUNT_LOOP(a) |
| #endif |
| #ifdef CONFIG_FEATURE_MTAB_SUPPORT |
| #define USAGE_MTAB(a) a |
| #else |
| #define USAGE_MTAB(a) |
| #endif |
| #define mount_trivial_usage \ |
| "[flags] DEVICE NODE [-o options,more-options]" |
| #define mount_full_usage \ |
| "Mount a filesystem\n\n" \ |
| "Flags:\n" \ |
| "\t-a:\t\tMount all filesystems in fstab.\n" \ |
| USAGE_MTAB( \ |
| "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \ |
| "\t-n:\t\tDon't write a mount table entry.\n" \ |
| ) \ |
| "\t-o option:\tOne of many filesystem options, listed below.\n" \ |
| "\t-r:\t\tMount the filesystem read-only.\n" \ |
| "\t-t fs-type:\tSpecify the filesystem type.\n" \ |
| "\t-w:\t\tMount for reading and writing (default).\n" \ |
| "\n" \ |
| "Options for use with the \"-o\" flag:\n" \ |
| "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \ |
| "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \ |
| "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \ |
| "\texec/noexec:\tAllow use of executable files / disallow them.\n" \ |
| USAGE_MOUNT_LOOP( \ |
| "\tloop:\t\tMounts a file via loop device.\n" \ |
| ) \ |
| "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \ |
| "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \ |
| "\tro/rw:\t\tMount for read-only / read-write.\n" \ |
| "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \ |
| "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \ |
| "You'll have to see the written documentation for those filesystems." |
| #define mount_example_usage \ |
| "$ mount\n" \ |
| "/dev/hda3 on / type minix (rw)\n" \ |
| "proc on /proc type proc (rw)\n" \ |
| "devpts on /dev/pts type devpts (rw)\n" \ |
| "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ |
| "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" |
| |
| #define mt_trivial_usage \ |
| "[-f device] opcode value" |
| #define mt_full_usage \ |
| "Control magnetic tape drive operation\n" \ |
| "\nAvailable Opcodes:\n\n" \ |
| "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ |
| "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ |
| "ras3 reset retension rew rewoffline seek setblk setdensity\n" \ |
| "setpart tell unload unlock weof wset" |
| |
| #define mv_trivial_usage \ |
| "SOURCE DEST\n" \ |
| "or: mv SOURCE... DIRECTORY" |
| #define mv_full_usage \ |
| "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY." |
| #define mv_example_usage \ |
| "$ mv /tmp/foo /bin/bar\n" |
| |
| #define nameif_trivial_usage \ |
| "[-s] [-c FILE] [{IFNAME MACADDR}]" |
| #define nameif_full_usage \ |
| "Nameif renaming network interface while it in the down state.\n\n" \ |
| "Options:\n" \ |
| "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \ |
| "\t-s\t\tUse syslog (LOCAL0 facility).\n" \ |
| "\tIFNAME MACADDR\tnew_interface_name interface_mac_address\n" |
| #define nameif_example_usage \ |
| "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ |
| " or\n" \ |
| "$ nameif -c /etc/my_mactab_file\n" \ |
| |
| #define nc_trivial_usage \ |
| "[OPTIONS] [IP] [port]" |
| #define nc_full_usage \ |
| "Netcat opens a pipe to IP:port\n\n" \ |
| "Options:\n" \ |
| "\t-l\t\tlisten mode, for inbound connects\n" \ |
| "\t-p PORT\t\tlocal port number\n" \ |
| "\t-i SECS\t\tdelay interval for lines sent\n" \ |
| "\t-e PROG\t\tprogram to exec after connect (dangerous!)" |
| #define nc_example_usage \ |
| "$ nc foobar.somedomain.com 25\n" \ |
| "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ |
| "help\n" \ |
| "214-Commands supported:\n" \ |
| "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ |
| "214 NOOP QUIT RSET HELP\n" \ |
| "quit\n" \ |
| "221 foobar closing connection\n" |
| |
| #define netstat_trivial_usage \ |
| "[-laenrtuwx]" |
| #define netstat_full_usage \ |
| "-l display listening server sockets\n" \ |
| "-a display all sockets (default: connected)\n" \ |
| "-e display other/more information\n" \ |
| "-n don't resolve names\n" \ |
| "-r display routing table\n" \ |
| "-t tcp sockets\n" \ |
| "-u udp sockets\n" \ |
| "-w raw sockets\n" \ |
| "-x unix sockets\n" |
| |
| #define nslookup_trivial_usage \ |
| "[HOST] [SERVER]" |
| #define nslookup_full_usage \ |
| "Queries the nameserver for the IP address of the given HOST\n" \ |
| "optionally using a specified DNS server" |
| #define nslookup_example_usage \ |
| "$ nslookup localhost\n" \ |
| "Server: default\n" \ |
| "Address: default\n" \ |
| "\n" \ |
| "Name: debian\n" \ |
| "Address: 127.0.0.1\n" |
| |
| #define od_trivial_usage \ |
| "[-aBbcDdeFfHhIiLlOovXx] [FILE]" |
| #define od_full_usage \ |
| "Write an unambiguous representation, octal bytes by default, of FILE\n"\ |
| "to standard output. With no FILE, or when FILE is -, read standard input." |
| |
| #define openvt_trivial_usage \ |
| "<vtnum> <COMMAND> [ARGS...]" |
| #define openvt_full_usage \ |
| "Start a command on a new virtual terminal" |
| #define openvt_example_usage \ |
| "openvt 2 /bin/ash\n" |
| |
| #ifdef CONFIG_FEATURE_SHA1_PASSWORDS |
| #define PASSWORD_ALG_TYPES(a) a |
| #else |
| #define PASSWORD_ALG_TYPES(a) |
| #endif |
| #define passwd_trivial_usage \ |
| "[OPTION] [name]" |
| #define passwd_full_usage \ |
| "Change a user password. If no name is specified,\n" \ |
| "changes the password for the current user.\n" \ |
| "Options:\n" \ |
| "\t-a\tDefine which algorithm shall be used for the password.\n" \ |
| "\t\t\t(Choices: des, md5" \ |
| PASSWORD_ALG_TYPES(", sha1") \ |
| ")\n\t-d\tDelete the password for the specified user account.\n" \ |
| "\t-l\tLocks (disables) the specified user account.\n" \ |
| "\t-u\tUnlocks (re-enables) the specified user account." |
| |
| #define pidof_trivial_usage \ |
| "process-name [process-name ...]" |
| #define pidof_full_usage \ |
| "Lists the PIDs of all processes with names that match the names on the command line" |
| #define pidof_example_usage \ |
| "$ pidof init\n" \ |
| "1\n" |
| |
| #ifndef CONFIG_FEATURE_FANCY_PING |
| #define ping_trivial_usage "host" |
| #define ping_full_usage "Send ICMP ECHO_REQUEST packets to network hosts" |
| #else |
| #define ping_trivial_usage \ |
| "[OPTION]... host" |
| #define ping_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \ |
| "Options:\n" \ |
| "\t-c COUNT\tSend only COUNT pings.\n" \ |
| "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \ |
| "\t-q\t\tQuiet mode, only displays output at start\n" \ |
| "\t\t\tand when finished." |
| #endif |
| #define ping_example_usage \ |
| "$ ping localhost\n" \ |
| "PING slag (127.0.0.1): 56 data bytes\n" \ |
| "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ |
| "\n" \ |
| "--- debian ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| |
| #ifndef CONFIG_FEATURE_FANCY_PING6 |
| #define ping6_trivial_usage "host" |
| #define ping6_full_usage "Send ICMP ECHO_REQUEST packets to network hosts" |
| #else |
| #define ping6_trivial_usage \ |
| "[OPTION]... host" |
| #define ping6_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \ |
| "Options:\n" \ |
| "\t-c COUNT\tSend only COUNT pings.\n" \ |
| "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \ |
| "\t-q\t\tQuiet mode, only displays output at start\n" \ |
| "\t\t\tand when finished." |
| #endif |
| #define ping6_example_usage \ |
| "$ ping6 ip6-localhost\n" \ |
| "PING ip6-localhost (::1): 56 data bytes\n" \ |
| "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ |
| "\n" \ |
| "--- ip6-localhost ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| |
| #define pivot_root_trivial_usage \ |
| "NEW_ROOT PUT_OLD" |
| #define pivot_root_full_usage \ |
| "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ |
| "the new root file system." |
| |
| #define poweroff_trivial_usage \ |
| "" |
| #define poweroff_full_usage \ |
| "Halt the system and request that the kernel shut off the power." |
| |
| #define printf_trivial_usage \ |
| "FORMAT [ARGUMENT...]" |
| #define printf_full_usage \ |
| "Formats and prints ARGUMENT(s) according to FORMAT,\n" \ |
| "Where FORMAT controls the output exactly as in C printf." |
| #define printf_example_usage \ |
| "$ printf "Val=%d\\n" 5\n" \ |
| "Val=5\n" |
| |
| #define ps_trivial_usage \ |
| "" |
| #define ps_full_usage \ |
| "Report process status\n" \ |
| "\nThis version of ps accepts no options." |
| #define ps_example_usage \ |
| "$ ps\n" \ |
| " PID Uid Gid State Command\n" \ |
| " 1 root root S init\n" \ |
| " 2 root root S [kflushd]\n" \ |
| " 3 root root S [kupdate]\n" \ |
| " 4 root root S [kpiod]\n" \ |
| " 5 root root S [kswapd]\n" \ |
| " 742 andersen andersen S [bash]\n" \ |
| " 743 andersen andersen S -bash\n" \ |
| " 745 root root S [getty]\n" \ |
| " 2990 andersen andersen R ps\n" |
| |
| #define pwd_trivial_usage \ |
| "" |
| #define pwd_full_usage \ |
| "Print the full filename of the current working directory." |
| #define pwd_example_usage \ |
| "$ pwd\n" \ |
| "/root\n" |
| |
| #define rdate_trivial_usage \ |
| "[OPTION] HOST" |
| #define rdate_full_usage \ |
| "Get and possibly set the system date and time from a remote HOST.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tSet the system date and time (default).\n" \ |
| "\t-p\tPrint the date and time." |
| |
| #define readlink_trivial_usage \ |
| "" |
| #define readlink_full_usage \ |
| "Read a symbolic link." |
| |
| #define realpath_trivial_usage \ |
| "pathname ..." |
| #define realpath_full_usage \ |
| "return the canonicalized absolute pathnames of given arguments\n\n" |
| |
| #define reboot_trivial_usage \ |
| "" |
| #define reboot_full_usage \ |
| "Reboot the system." |
| |
| #define renice_trivial_usage \ |
| "priority pid [pid ...]" |
| #define renice_full_usage \ |
| "Changes priority of running processes. Allowed priorities range\n" \ |
| "from 20 (the process runs only when nothing else is running) to 0\n" \ |
| "(default priority) to -20 (almost nothing else ever gets to run)." |
| |
| #define reset_trivial_usage \ |
| "" |
| #define reset_full_usage \ |
| "Resets the screen." |
| |
| #define rm_trivial_usage \ |
| "[OPTION]... FILE..." |
| #define rm_full_usage \ |
| "Remove (unlink) the FILE(s). You may use '--' to\n" \ |
| "indicate that all following arguments are non-options.\n\n" \ |
| "Options:\n" \ |
| "\t-i\t\talways prompt before removing each destination" \ |
| "\t-f\t\tremove existing destinations, never prompt\n" \ |
| "\t-r or -R\tremove the contents of directories recursively" |
| #define rm_example_usage \ |
| "$ rm -rf /tmp/foo\n" |
| |
| #define rmdir_trivial_usage \ |
| "[OPTION]... DIRECTORY..." |
| #define rmdir_full_usage \ |
| "Remove the DIRECTORY(ies), if they are empty." |
| #define rmdir_example_usage \ |
| "# rmdir /tmp/foo\n" |
| |
| #define rmmod_trivial_usage \ |
| "[OPTION]... [MODULE]..." |
| #define rmmod_full_usage \ |
| "Unloads the specified kernel modules from the kernel.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tRemove all unused modules (recursively)" |
| #define rmmod_example_usage \ |
| "$ rmmod tulip\n" |
| |
| #define route_trivial_usage \ |
| "[{add|del|flush}]" |
| #define route_full_usage \ |
| "Edit the kernel's routing tables.\n\n" \ |
| "Options:\n" \ |
| "\t-n\tDont resolve names.\n" \ |
| "\t-e\tDisplay other/more information" |
| |
| #define rpm_trivial_usage \ |
| "-i -q[ildc]p package.rpm" |
| #define rpm_full_usage \ |
| "Manipulates RPM packages" \ |
| "Options:" \ |
| "\t-i Install package" \ |
| "\t-q Query package" \ |
| "\t\t-p Query uninstalled package" \ |
| "\t\t-i Show information" \ |
| "\t\t-l List contents" \ |
| "\t\t-d List documents" \ |
| "\t\t-c List config files" |
| |
| #define rpm2cpio_trivial_usage \ |
| "package.rpm" |
| #define rpm2cpio_full_usage \ |
| "Outputs a cpio archive of the rpm file." |
| |
| #define run_parts_trivial_usage \ |
| "[-t] [-a ARG] [-u MASK] DIRECTORY" |
| #define run_parts_full_usage \ |
| "Run a bunch of scripts in a directory.\n\n" \ |
| "Options:\n" \ |
| "\t-t\t\tTest only what file will be executed, without execute them.\n" \ |
| "\t-a ARG\tPass ARG as an argument for every program invoked.\n" \ |
| "\t-u MASK\tSet the umask to MASK before executing every program." |
| |
| #define sed_trivial_usage \ |
| "[-nef] pattern [files...]" |
| #define sed_full_usage \ |
| "Options:\n" \ |
| "\t-n\t\tsuppress automatic printing of pattern space\n" \ |
| "\t-e script\tadd the script to the commands to be executed\n" \ |
| "\t-f scriptfile\tadd the contents of script-file to the commands to be executed\n" \ |
| "\n" \ |
| "If no -e or -f is given, the first non-option argument is taken as the\n" \ |
| "sed script to interpret. All remaining arguments are names of input\n" \ |
| "files; if no input files are specified, then the standard input is read." |
| #define sed_example_usage \ |
| "$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ |
| "bar\n" |
| |
| #define setkeycodes_trivial_usage \ |
| "SCANCODE KEYCODE ..." |
| #define setkeycodes_full_usage \ |
| "Set entries into the kernel's scancode-to-keycode map,\n" \ |
| "allowing unusual keyboards to generate usable keycodes.\n\n" \ |
| "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ |
| "and KEYCODE is given in decimal" |
| #define setkeycodes_example_usage \ |
| "$ setkeycodes e030 127\n" |
| |
| #define lash_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: sh -c command [args]..." |
| #define lash_full_usage \ |
| "lash: The BusyBox LAme SHell (command interpreter)" |
| #define lash_notes_usage \ |
| "This command does not yet have proper documentation.\n" \ |
| "\n" \ |
| "Use lash just as you would use any other shell. It properly handles pipes,\n" \ |
| "redirects, job control, can be used as the shell for scripts, and has a\n" \ |
| "sufficient set of builtins to do what is needed. It does not (yet) support\n" \ |
| "Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \ |
| "use ash or bash. If you just need a very simple and extremely small shell,\n" \ |
| "this will do the job." |
| |
| #define sleep_trivial_usage \ |
| "N" |
| #define sleep_full_usage \ |
| "Pause for N seconds." |
| #define sleep_example_usage \ |
| "$ sleep 2\n" \ |
| "[2 second delay results]\n" |
| |
| |
| #ifdef CONFIG_FEATURE_SORT_UNIQUE |
| #define USAGE_SORT_UNIQUE(a) a |
| #else |
| #define USAGE_SORT_UNIQUE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_SORT_REVERSE |
| #define USAGE_SORT_REVERSE(a) a |
| #else |
| #define USAGE_SORT_REVERSE(a) |
| #endif |
| #define sort_trivial_usage \ |
| "[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..." |
| #define sort_full_usage \ |
| "Sorts lines of text in the specified files\n\n"\ |
| "Options:\n" \ |
| USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \ |
| USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \ |
| "\t-n\tsort numerics" |
| #define sort_example_usage \ |
| "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" \ |
| "d\n" \ |
| "e\n" \ |
| "f\n" |
| |
| #define start_stop_daemon_trivial_usage \ |
| "[OPTIONS]" |
| #define start_stop_daemon_full_usage \ |
| "Program to start and stop services.\n"\ |
| "Options:\n" \ |
| "-S\t\t\tstart\n"\ |
| "-K\t\t\tstop\n"\ |
| "-b\t\t\tforce process into background (daemonize)\n"\ |
| "-x <executable>\t\tprogram to start/check if it is running\n"\ |
| "-u <username>|<uid>\tstop this user's processes\n"\ |
| "-n <process-name>\tstop processes with this name\n"\ |
| "-s <signal>\t\tsignal to send (default 15)\n"\ |
| "-a <pathname>\t\tprogram to start (default <executable>)\n" |
| |
| #define strings_trivial_usage \ |
| "[-afo] [-n length] [file ... ]" |
| #define strings_full_usage \ |
| "Display printable strings in a binary file." \ |
| "\n\nOptions:" \ |
| "\n\t-f\tPrecede each string with the name of the file where it was found." \ |
| "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \ |
| "\n\t-o\tEach string is preceded by its decimal offset in the file." |
| |
| #define stty_trivial_usage \ |
| "[-a|g] [-F DEVICE] [SETTING]..." |
| #define stty_full_usage \ |
| "Without arguments, prints baud rate, line discipline," \ |
| "\nand deviations from stty sane." \ |
| "\n\nOptions:" \ |
| "\n\t-F DEVICE\topen device instead of stdin" \ |
| "\n\t-a\t\tprint all current settings in human-readable form" \ |
| "\n\t-g\t\tprint in stty-readable form" \ |
| "\n\t[SETTING]\tsee manpage" |
| |
| #define su_trivial_usage \ |
| "[OPTION]... [-] [username]" |
| #define su_full_usage \ |
| "Change user id or become root.\n" \ |
| "Options:\n" \ |
| "\t-p\tPreserve environment" |
| |
| #define sulogin_trivial_usage \ |
| "[OPTION]... [tty-device]" |
| #define sulogin_full_usage \ |
| "Single user login\n" \ |
| "Options:\n" \ |
| "\t-f\tDo not authenticate (user already authenticated)\n" \ |
| "\t-h\tName of the remote host for this login.\n" \ |
| "\t-p\tPreserve environment." |
| |
| #define swapoff_trivial_usage \ |
| "[OPTION] [DEVICE]" |
| #define swapoff_full_usage \ |
| "Stop swapping virtual memory pages on DEVICE.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tStop swapping on all swap devices" |
| |
| #define swapon_trivial_usage \ |
| "[OPTION] [DEVICE]" |
| #define swapon_full_usage \ |
| "Start swapping virtual memory pages on DEVICE.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tStart swapping on all swap devices" |
| |
| #define sync_trivial_usage \ |
| "" |
| #define sync_full_usage \ |
| "Write all buffered filesystem blocks to disk." |
| |
| |
| #ifdef CONFIG_FEATURE_REMOTE_LOG |
| #define USAGE_REMOTE_LOG(a) a |
| #else |
| #define USAGE_REMOTE_LOG(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IPC_SYSLOG |
| #define USAGE_IPC_LOG(a) a |
| #else |
| #define USAGE_IPC_LOG(a) |
| #endif |
| |
| #define syslogd_trivial_usage \ |
| "[OPTION]..." |
| #define syslogd_full_usage \ |
| "Linux system and kernel logging utility.\n" \ |
| "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \ |
| "Options:\n" \ |
| "\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \ |
| "\t-n\t\tRun as a foreground process\n" \ |
| "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \ |
| USAGE_REMOTE_LOG( \ |
| "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \ |
| "\t-L\t\tLog locally and via network logging (default is network only)") \ |
| USAGE_IPC_LOG( \ |
| "\n\t-C\t\tLog to a circular buffer (read the buffer using logread)") |
| #define syslogd_example_usage \ |
| "$ syslogd -R masterlog:514\n" \ |
| "$ syslogd -R 192.168.1.1:601\n" |
| |
| |
| #ifndef CONFIG_FEATURE_FANCY_TAIL |
| #define USAGE_UNSIMPLE_TAIL(a) |
| #else |
| #define USAGE_UNSIMPLE_TAIL(a) a |
| #endif |
| #define tail_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tail_full_usage \ |
| "Print last 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ |
| "Options:\n" \ |
| USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \ |
| "\t-n N[kbm]\tprint last N lines instead of last 10\n" \ |
| "\t-f\t\toutput data as the file grows" \ |
| USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \ |
| "\t-s SEC\t\twait SEC seconds between reads with -f\n" \ |
| "\t-v\t\talways output headers giving file names\n\n" \ |
| "If the first character of N (bytes or lines) is a '+', output begins with \n" \ |
| "the Nth item from the start of each file, otherwise, print the last N items\n" \ |
| "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) |
| #define tail_example_usage \ |
| "$ tail -n 1 /etc/resolv.conf\n" \ |
| "nameserver 10.0.0.1\n" |
| |
| #ifdef CONFIG_FEATURE_TAR_CREATE |
| #define USAGE_TAR_CREATE(a) a |
| #else |
| #define USAGE_TAR_CREATE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_EXCLUDE |
| #define USAGE_TAR_EXCLUDE(a) a |
| #else |
| #define USAGE_TAR_EXCLUDE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_GZIP |
| #define USAGE_TAR_GZIP(a) a |
| #else |
| #define USAGE_TAR_GZIP(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_BZIP2 |
| #define USAGE_TAR_BZIP2(a) a |
| #else |
| #define USAGE_TAR_BZIP2(a) |
| #endif |
| |
| #define tar_trivial_usage \ |
| "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") "xtvO] " \ |
| USAGE_TAR_EXCLUDE("[--exclude FILE] [-X FILE]") \ |
| "[-f TARFILE] [-C DIR] [FILE(s)] ..." |
| #define tar_full_usage \ |
| "Create, extract, or list files from a tar file.\n\n" \ |
| "Options:\n" \ |
| USAGE_TAR_CREATE("\tc\t\tcreate\n") \ |
| "\tx\t\textract\n" \ |
| "\tt\t\tlist\n" \ |
| "\nArchive format selection:\n" \ |
| USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \ |
| USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \ |
| "\nFile selection:\n" \ |
| "\tf\t\tname of TARFILE or \"-\" for stdin\n" \ |
| "\tO\t\textract to stdout\n" \ |
| USAGE_TAR_EXCLUDE( \ |
| "\texclude\t\tfile to exclude\n" \ |
| "\tX\t\tfile with names to exclude\n" \ |
| ) \ |
| "\tC\t\tchange to directory DIR before operation\n" \ |
| "\tv\t\tverbosely list files processed" |
| #define tar_example_usage \ |
| "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ |
| "$ tar -cf /tmp/tarball.tar /usr/local\n" |
| |
| #define tee_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tee_full_usage \ |
| "Copy standard input to each FILE, and also to standard output.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tappend to the given FILEs, do not overwrite" |
| #define tee_example_usage \ |
| "$ echo "Hello" | tee /tmp/foo\n" \ |
| "$ cat /tmp/foo\n" \ |
| "Hello\n" |
| |
| #define telnet_trivial_usage \ |
| "HOST [PORT]" |
| #define telnet_full_usage \ |
| "Telnet is used to establish interactive communication with another\n"\ |
| "computer over a network using the TELNET protocol." |
| |
| #define telnetd_trivial_usage \ |
| "[OPTION]" |
| #define telnetd_full_usage \ |
| "Telnetd listens for incoming TELNET connections on PORT.\n"\ |
| "Options:\n" \ |
| "\t-p PORT\tlisten for connections on PORT (default 23)\n"\ |
| "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)" |
| |
| #define test_trivial_usage \ |
| "EXPRESSION\n or [ EXPRESSION ]" |
| #define test_full_usage \ |
| "Checks file types and compares values returning an exit\n" \ |
| "code determined by the value of EXPRESSION." |
| #define test_example_usage \ |
| "$ test 1 -eq 2\n" \ |
| "$ echo $?\n" \ |
| "1\n" \ |
| "$ test 1 -eq 1\n" \ |
| "$ echo $? \n" \ |
| "0\n" \ |
| "$ [ -d /etc ]\n" \ |
| "$ echo $?\n" \ |
| "0\n" \ |
| "$ [ -d /junk ]\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #ifdef CONFIG_FEATURE_TFTP_GET |
| #define USAGE_TFTP_GET(a) a |
| #else |
| #define USAGE_TFTP_GET(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TFTP_PUT |
| #define USAGE_TFTP_PUT(a) a |
| #else |
| #define USAGE_TFTP_PUT(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE |
| #define USAGE_TFTP_BS(a) a |
| #else |
| #define USAGE_TFTP_BS(a) |
| #endif |
| |
| #define tftp_trivial_usage \ |
| "[OPTION]... HOST [PORT]" |
| #define tftp_full_usage \ |
| "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \ |
| "Options:\n" \ |
| "\t-l FILE\tLocal FILE.\n" \ |
| "\t-r FILE\tRemote FILE.\n" \ |
| USAGE_TFTP_GET( \ |
| "\t-g\tGet file.\n" \ |
| ) \ |
| USAGE_TFTP_PUT( \ |
| "\t-p\tPut file.\n" \ |
| ) \ |
| USAGE_TFTP_BS( \ |
| "\t-b SIZE\tTransfer blocks of SIZE octets.\n" \ |
| ) |
| #define time_trivial_usage \ |
| "[OPTION]... COMMAND [ARGS...]" |
| #define time_full_usage \ |
| "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ |
| "COMMAND's resource usage information is displayed\n\n" \ |
| "Options:\n" \ |
| "\t-v\tDisplays verbose resource usage information." |
| |
| #define top_trivial_usage \ |
| "[-d <seconds>]" |
| #define top_full_usage \ |
| "top provides an view of processor activity in real time.\n" \ |
| "This utility reads the status for all processes in /proc each <seconds>\n" \ |
| "and shows the status for however many processes will fit on the screen.\n" \ |
| "This utility will not show processes that are started after program startup,\n" \ |
| "but it will show the EXIT status for and PIDs that exit while it is running." |
| |
| #define touch_trivial_usage \ |
| "[-c] FILE [FILE ...]" |
| #define touch_full_usage \ |
| "Update the last-modified date on the given FILE[s].\n\n" \ |
| "Options:\n" \ |
| "\t-c\tDo not create any files" |
| #define touch_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "/bin/ls: /tmp/foo: No such file or directory\n" \ |
| "$ touch /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" |
| |
| #define tr_trivial_usage \ |
| "[-cds] STRING1 [STRING2]" |
| #define tr_full_usage \ |
| "Translate, squeeze, and/or delete characters from\n" \ |
| "standard input, writing to standard output.\n\n" \ |
| "Options:\n" \ |
| "\t-c\ttake complement of STRING1\n" \ |
| "\t-d\tdelete input characters coded STRING1\n" \ |
| "\t-s\tsqueeze multiple output characters of STRING2 into one character" |
| #define tr_example_usage \ |
| "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \ |
| "hello world\n" |
| |
| #define traceroute_trivial_usage \ |
| "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n\ |
| [-s src_addr] [-t tos] [-w wait] host [data size]" |
| #define traceroute_full_usage \ |
| "trace the route ip packets follow going to \"host\"\n" \ |
| "Options:\n" \ |
| "\t-d\tset SO_DEBUG options to socket\n" \ |
| "\t-n\tPrint hop addresses numerically rather than symbolically\n" \ |
| "\t-r\tBypass the normal routing tables and send directly to a host\n" \ |
| "\t-v\tVerbose output\n" \ |
| "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \ |
| "\t-p port#\tSet the base UDP port number used in probes\n" \ |
| "\t\t(default is 33434)\n" \ |
| "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \ |
| "\t\t(default is 3)\n" \ |
| "\t-s src_addr\tUse the following IP address as the source address\n" \ |
| "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \ |
| "\t\t(default 0)\n" \ |
| "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \ |
| "\t\t(default 3 sec.)." |
| |
| |
| #define true_trivial_usage \ |
| "" |
| #define true_full_usage \ |
| "Return an exit code of TRUE (0)." |
| #define true_example_usage \ |
| "$ true\n" \ |
| "$ echo $?\n" \ |
| "0\n" |
| |
| #define tty_trivial_usage \ |
| "" |
| #define tty_full_usage \ |
| "Print the file name of the terminal connected to standard input.\n\n"\ |
| "Options:\n" \ |
| "\t-s\tprint nothing, only return an exit status" |
| #define tty_example_usage \ |
| "$ tty\n" \ |
| "/dev/tty2\n" |
| |
| #define udhcpc_trivial_usage \ |
| "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]" |
| #define udhcpc_full_usage \ |
| "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \ |
| "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \ |
| "\t-h,\t \tAlias for -H\n" \ |
| "\t-f,\t--foreground\tDo not fork after getting lease\n" \ |
| "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \ |
| "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \ |
| "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \ |
| "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \ |
| "\t-q,\t--quit\tQuit after obtaining lease\n" \ |
| "\t-r,\t--request=IP\tIP address to request (default: none)\n" \ |
| "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \ |
| "\t-v,\t--version\tDisplay version" |
| |
| #define udhcpd_trivial_usage \ |
| "[configfile]\n" \ |
| |
| #define udhcpd_full_usage \ |
| "" |
| |
| #ifdef CONFIG_FEATURE_MOUNT_FORCE |
| #define USAGE_MOUNT_FORCE(a) a |
| #else |
| #define USAGE_MOUNT_FORCE(a) |
| #endif |
| #define umount_trivial_usage \ |
| "[flags] FILESYSTEM|DIRECTORY" |
| #define umount_full_usage \ |
| "Unmount file systems\n" \ |
| "\nFlags:\n" "\t-a\tUnmount all file systems" \ |
| USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \ |
| "\n\t-r\tTry to remount devices as read-only if mount is busy" \ |
| USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \ |
| USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)") |
| #define umount_example_usage \ |
| "$ umount /dev/hdc1 \n" |
| |
| #define uname_trivial_usage \ |
| "[OPTION]..." |
| #define uname_full_usage \ |
| "Print certain system information. With no OPTION, same as -s.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tprint all information\n" \ |
| "\t-m\tthe machine (hardware) type\n" \ |
| "\t-n\tprint the machine's network node hostname\n" \ |
| "\t-r\tprint the operating system release\n" \ |
| "\t-s\tprint the operating system name\n" \ |
| "\t-p\tprint the host processor type\n" \ |
| "\t-v\tprint the operating system version" |
| #define uname_example_usage \ |
| "$ uname -a\n" \ |
| "Linux debian 2.2.15pre13 #5 Tue Mar 14 16:03:50 MST 2000 i686 unknown\n" |
| |
| #define uncompress_trivial_usage \ |
| "[-c] [-f] [ name ... ]" |
| #define uncompress_full_usage \ |
| "Uncompress .Z file[s]\n" \ |
| "Options:\n" \ |
| "\t-c\textract to stdout\n" \ |
| "\t-f\tforce overwrite an existing file\n" |
| |
| #define uniq_trivial_usage \ |
| "[OPTION]... [INPUT [OUTPUT]]" |
| #define uniq_full_usage \ |
| "Discard all but one of successive identical lines from INPUT\n" \ |
| "(or standard input), writing to OUTPUT (or standard output).\n\n" \ |
| "Options:\n" \ |
| "\t-c\tprefix lines by the number of occurrences\n" \ |
| "\t-d\tonly print duplicate lines\n" \ |
| "\t-u\tonly print unique lines" |
| #define uniq_example_usage \ |
| "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" |
| |
| #define unix2dos_trivial_usage \ |
| "[option] [FILE]" |
| #define unix2dos_full_usage \ |
| "Converts FILE from unix format to dos format. When no option\n" \ |
| "is given, the input is converted to the opposite output format.\n" \ |
| "When no file is given, uses stdin for input and stdout for output.\n" \ |
| "Options:\n" \ |
| "\t-u\toutput will be in UNIX format\n" \ |
| "\t-d\toutput will be in DOS format" |
| |
| #define unzip_trivial_usage \ |
| "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" |
| #define unzip_full_usage \ |
| "Extracts files from ZIP archives.\n\n" \ |
| "Options:\n" \ |
| "\t-l\tlist archive contents (short form)\n" \ |
| "\t-n\tnever overwrite existing files (default)\n" \ |
| "\t-o\toverwrite files without prompting\n" \ |
| "\t-p\tsend output to stdout\n" \ |
| "\t-q\tbe quiet\n" \ |
| "\t-x\texclude these files\n" \ |
| "\t-d\textract files into this directory" |
| |
| #define update_trivial_usage \ |
| "[options]" |
| #define update_full_usage \ |
| "Periodically flushes filesystem buffers.\n\n" \ |
| "Options:\n" \ |
| "\t-S\tforce use of sync(2) instead of flushing\n" \ |
| "\t-s SECS\tcall sync this often (default 30)\n" \ |
| "\t-f SECS\tflush some buffers this often (default 5)" |
| |
| #define uptime_trivial_usage \ |
| "" |
| #define uptime_full_usage \ |
| "Display the time since the last boot." |
| #define uptime_example_usage \ |
| "$ uptime\n" \ |
| " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" |
| |
| #define usleep_trivial_usage \ |
| "N" |
| #define usleep_full_usage \ |
| "Pause for N microseconds." |
| #define usleep_example_usage \ |
| "$ usleep 1000000\n" \ |
| "[pauses for 1 second]\n" |
| |
| #define uudecode_trivial_usage \ |
| "[FILE]..." |
| #define uudecode_full_usage \ |
| "Uudecode a file that is uuencoded.\n\n" \ |
| "Options:\n" \ |
| "\t-o FILE\tdirect output to FILE" |
| #define uudecode_example_usage \ |
| "$ uudecode -o busybox busybox.uu\n" \ |
| "$ ls -l busybox\n" \ |
| "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" |
| |
| #define uuencode_trivial_usage \ |
| "[OPTION] [INFILE] REMOTEFILE" |
| #define uuencode_full_usage \ |
| "Uuencode a file.\n\n" \ |
| "Options:\n" \ |
| "\t-m\tuse base64 encoding per RFC1521" |
| #define uuencode_example_usage \ |
| "$ uuencode busybox busybox\n" \ |
| "begin 755 busybox\n" \ |
| "<encoded file snipped>\n" \ |
| "$ uudecode busybox busybox > busybox.uu\n" \ |
| "$\n" |
| |
| #define vconfig_trivial_usage \ |
| "COMMAND [OPTIONS] ..." |
| |
| #define vconfig_full_usage \ |
| "Usage: add [interface-name] [vlan_id] \n" \ |
| " rem [vlan-name] \n" \ |
| " set_flag [interface-name] [flag-num] [0 | 1] \n" \ |
| " set_egress_map [vlan-name] [skb_priority] [vlan_qos] \n" \ |
| " set_ingress_map [vlan-name] [skb_priority] [vlan_qos] \n" \ |
| " set_name_type [name-type] \n" |
| |
| #define vi_trivial_usage \ |
| "[OPTION] [FILE]..." |
| #define vi_full_usage \ |
| "edit FILE.\n\n" \ |
| "Options:\n" \ |
| "\t-R\tRead-only- do not write to the file." |
| |
| #define vlock_trivial_usage \ |
| "[OPTIONS]" |
| #define vlock_full_usage \ |
| "Lock a virtual terminal. A password is required to unlock\n" \ |
| "Options:\n" \ |
| "\t-a\tLock all VTs" |
| |
| #define watch_trivial_usage \ |
| "[-n <seconds>] COMMAND..." |
| #define watch_full_usage \ |
| "Executes a program periodically.\n" \ |
| "Options:\n" \ |
| "\t-n\tLoop period in seconds - default is 2." |
| #define watch_example_usage \ |
| "$ watch date\n" \ |
| "Mon Dec 17 10:31:40 GMT 2000\n" \ |
| "Mon Dec 17 10:31:42 GMT 2000\n" \ |
| "Mon Dec 17 10:31:44 GMT 2000" |
| |
| #define watchdog_trivial_usage \ |
| "DEV" |
| #define watchdog_full_usage \ |
| "Periodically write to watchdog device DEV" |
| |
| #define wc_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define wc_full_usage \ |
| "Print line, word, and byte counts for each FILE, and a total line if\n" \ |
| "more than one FILE is specified. With no FILE, read standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-c\tprint the byte counts\n" \ |
| "\t-l\tprint the newline counts\n" \ |
| "\t-L\tprint the length of the longest line\n" \ |
| "\t-w\tprint the word counts" |
| #define wc_example_usage \ |
| "$ wc /etc/passwd\n" \ |
| " 31 46 1365 /etc/passwd\n" |
| |
| #define wget_trivial_usage \ |
| "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url" |
| #define wget_full_usage \ |
| "wget retrieves files via HTTP or FTP\n\n" \ |
| "Options:\n" \ |
| "\t-c\tcontinue retrieval of aborted transfers\n" \ |
| "\t-q\tquiet mode - do not print\n" \ |
| "\t-P\tSet directory prefix to DIR\n" \ |
| "\t-O\tsave to filename ('-' for stdout)\n" \ |
| "\t-Y\tuse proxy ('on' or 'off')" |
| |
| #define which_trivial_usage \ |
| "[COMMAND ...]" |
| #define which_full_usage \ |
| "Locates a COMMAND." |
| #define which_example_usage \ |
| "$ which login\n" \ |
| "/bin/login\n" |
| |
| #define who_trivial_usage \ |
| " " |
| #define who_full_usage \ |
| "Prints the current user names and related information" |
| |
| #define whoami_trivial_usage \ |
| "" |
| #define whoami_full_usage \ |
| "Prints the user name associated with the current effective user id." |
| |
| #define xargs_trivial_usage \ |
| "[COMMAND] [-prt] [ARGS...]" |
| #define xargs_full_usage \ |
| "Executes COMMAND on every item given by standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-p\tPrompt the user about whether to run each command\n" \ |
| "\t-r\tDo not run command for empty readed lines\n" \ |
| "\t-t\tPrint the command line on stderr before executing it." |
| #define xargs_example_usage \ |
| "$ ls | xargs gzip\n" \ |
| "$ find . -name '*.c' -print | xargs rm\n" |
| |
| #define yes_trivial_usage \ |
| "[OPTION]... [STRING]..." |
| #define yes_full_usage \ |
| "Repeatedly outputs a line with all specified STRING(s), or 'y'." |
| |
| #define zcat_trivial_usage \ |
| "FILE" |
| #define zcat_full_usage \ |
| "Uncompress to stdout." |