| /* vi: set sw=4 ts=4: */ |
| /* |
| * Gzip implementation for busybox |
| * |
| * Based on GNU gzip v1.2.4 Copyright (C) 1992-1993 Jean-loup Gailly. |
| * |
| * Originally adjusted for busybox by Sven Rudolph <sr1@inf.tu-dresden.de> |
| * based on gzip sources |
| * |
| * Adjusted further by Erik Andersen <andersen@lineo.com>, <andersee@debian.org> |
| * to support files as well as stdin/stdout, and to generally behave itself wrt |
| * command line handling. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * |
| * gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface |
| * Copyright (C) 1992-1993 Jean-loup Gailly |
| * The unzip code was written and put in the public domain by Mark Adler. |
| * Portions of the lzw code are derived from the public domain 'compress' |
| * written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies, |
| * Ken Turkowski, Dave Mack and Peter Jannesen. |
| * |
| * See the license_msg below and the file COPYING for the software license. |
| * See the file algorithm.doc for the compression algorithms and file formats. |
| */ |
| |
| #if 0 |
| static char *license_msg[] = { |
| " Copyright (C) 1992-1993 Jean-loup Gailly", |
| " This program is free software; you can redistribute it and/or modify", |
| " it under the terms of the GNU General Public License as published by", |
| " the Free Software Foundation; either version 2, or (at your option)", |
| " any later version.", |
| "", |
| " This program is distributed in the hope that it will be useful,", |
| " but WITHOUT ANY WARRANTY; without even the implied warranty of", |
| " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the", |
| " GNU General Public License for more details.", |
| "", |
| " You should have received a copy of the GNU General Public License", |
| " along with this program; if not, write to the Free Software", |
| " Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.", |
| 0 |
| }; |
| #endif |
| |
| #include "busybox.h" |
| #include <getopt.h> |
| #include <ctype.h> |
| #include <sys/types.h> |
| #include <signal.h> |
| #include <errno.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <memory.h> |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <stdlib.h> |
| #include <time.h> |
| #include <dirent.h> |
| #define BB_DECLARE_EXTERN |
| #define bb_need_memory_exhausted |
| #define bb_need_name_too_long |
| #include "messages.c" |
| |
| #define RECORD_IO 0 |
| |
| /* Return codes from gzip */ |
| #define OK 0 |
| #define ERROR 1 |
| #define WARNING 2 |
| |
| #define DEFLATED 8 |
| #define INBUFSIZ 0x2000 /* input buffer size */ |
| #define INBUF_EXTRA 64 /* required by unlzw() */ |
| #define OUTBUFSIZ 8192 /* output buffer size */ |
| #define OUTBUF_EXTRA 2048 /* required by unlzw() */ |
| #define DIST_BUFSIZE 0x2000 /* buffer for distances, see trees.c */ |
| |
| #define GZIP_MAGIC "\037\213" /* Magic header for gzip files, 1F 8B */ |
| |
| /* gzip flag byte */ |
| #define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ |
| #define ORIG_NAME 0x08 /* bit 3 set: original file name present */ |
| #define COMMENT 0x10 /* bit 4 set: file comment present */ |
| #define WSIZE 0x8000 /* window size--must be a power of two, and */ |
| /* at least 32K for zip's deflate method */ |
| |
| /* If BMAX needs to be larger than 16, then h and x[] should be ulg. */ |
| #define BMAX 16 /* maximum bit length of any code (16 for explode) */ |
| #define N_MAX 288 /* maximum number of codes in any set */ |
| |
| /* PKZIP header definitions */ |
| #define LOCSIG 0x04034b50L /* four-byte lead-in (lsb first) */ |
| #define LOCCRC 14 /* offset of crc */ |
| #define LOCLEN 22 /* offset of uncompressed length */ |
| #define EXTHDR 16 /* size of extended local header, inc sig */ |
| |
| #define BITS 16 |
| |
| /* Diagnostic functions */ |
| #ifdef DEBUG |
| # define Assert(cond,msg) {if(!(cond)) error_msg(msg);} |
| # define Trace(x) fprintf x |
| # define Tracev(x) {if (verbose) fprintf x ;} |
| # define Tracevv(x) {if (verbose>1) fprintf x ;} |
| # define Tracec(c,x) {if (verbose && (c)) fprintf x ;} |
| # define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} |
| #else |
| # define Assert(cond,msg) |
| # define Trace(x) |
| # define Tracev(x) |
| # define Tracevv(x) |
| # define Tracec(c,x) |
| # define Tracecv(c,x) |
| #endif |
| |
| #ifndef MAX_PATH_LEN /* max pathname length */ |
| # ifdef BUFSIZ |
| # define MAX_PATH_LEN BUFSIZ |
| # else |
| # define MAX_PATH_LEN 1024 |
| # endif |
| #endif |
| |
| #define NEXTBYTE() (uch)get_byte() |
| #define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}} |
| #define DUMPBITS(n) {b>>=(n);k-=(n);} |
| |
| #define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf(0)) |
| |
| /* Macros for getting two-byte and four-byte header values */ |
| #define SH(p) ((ush)(uch)((p)[0]) | ((ush)(uch)((p)[1]) << 8)) |
| #define LG(p) ((ulg)(SH(p)) | ((ulg)(SH((p)+2)) << 16)) |
| |
| /* in gzip.c */ |
| void abort_gzip (void); |
| typedef void (*sig_type) (int); |
| |
| typedef unsigned char uch; |
| typedef unsigned short ush; |
| typedef unsigned long ulg; |
| typedef int file_t; /* Do not use stdio */ |
| |
| static uch *inbuf; |
| static uch *outbuf; |
| static ush *d_buf; |
| static uch *window; |
| static ush *tab_prefix0; |
| static ush *tab_prefix1; |
| |
| /* local variables */ |
| static int test_mode = 0; /* check file integrity option */ |
| static int foreground; /* set if program run in foreground */ |
| static int method = DEFLATED; /* compression method */ |
| static int exit_code = OK; /* program exit code */ |
| static int last_member; /* set for .zip and .Z files */ |
| static int part_nb; /* number of parts in .gz file */ |
| static long ifile_size; /* input file size, -1 for devices (debug only) */ |
| static long bytes_in; /* number of input bytes */ |
| static long bytes_out; /* number of output bytes */ |
| static int ifd; /* input file descriptor */ |
| static int ofd; /* output file descriptor */ |
| static unsigned insize; /* valid bytes in inbuf */ |
| static unsigned inptr; /* index of next byte to be processed in inbuf */ |
| static unsigned outcnt; /* bytes in output buffer */ |
| |
| unsigned hufts; /* track memory usage */ |
| ulg bb; /* bit buffer */ |
| unsigned bk; /* bits in bit buffer */ |
| int crc_table_empty = 1; |
| |
| struct huft { |
| uch e; /* number of extra bits or operation */ |
| uch b; /* number of bits in this code or subcode */ |
| union { |
| ush n; /* literal, length base, or distance base */ |
| struct huft *t; /* pointer to next level of table */ |
| } v; |
| }; |
| |
| /* Tables for deflate from PKZIP's appnote.txt. */ |
| static unsigned border[] = { /* Order of the bit length code lengths */ |
| 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 |
| }; |
| static ush cplens[] = { /* Copy lengths for literal codes 257..285 */ |
| 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, |
| 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0 |
| }; |
| |
| /* note: see note #13 above about the 258 in this list. */ |
| static ush cplext[] = { /* Extra bits for literal codes 257..285 */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, |
| 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99 |
| }; /* 99==invalid */ |
| |
| static ush cpdist[] = { /* Copy offsets for distance codes 0..29 */ |
| 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, |
| 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, |
| 8193, 12289, 16385, 24577 |
| }; |
| |
| static ush cpdext[] = { /* Extra bits for distance codes */ |
| 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, |
| 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, |
| 12, 12, 13, 13 |
| }; |
| |
| ush mask_bits[] = { |
| 0x0000, |
| 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, |
| 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff |
| }; |
| |
| /* ======================================================================== |
| * Error handlers. |
| */ |
| void read_error_msg() |
| { |
| fprintf(stderr, "\n"); |
| if (errno != 0) { |
| perror(""); |
| } else { |
| fprintf(stderr, "unexpected end of file\n"); |
| } |
| abort_gzip(); |
| } |
| |
| /* =========================================================================== |
| * Fill the input buffer. This is called only when the buffer is empty. |
| */ |
| int fill_inbuf(eof_ok) |
| int eof_ok; /* set if EOF acceptable as a result */ |
| { |
| int len; |
| |
| /* Read as much as possible */ |
| insize = 0; |
| errno = 0; |
| do { |
| len = read(ifd, (char *) inbuf + insize, INBUFSIZ - insize); |
| if (len == 0 || len == EOF) |
| break; |
| insize += len; |
| } while (insize < INBUFSIZ); |
| |
| if (insize == 0) { |
| if (eof_ok) |
| return EOF; |
| read_error_msg(); |
| } |
| bytes_in += (ulg) insize; |
| inptr = 1; |
| return inbuf[0]; |
| } |
| |
| |
| /* ======================================================================== |
| * Check the magic number of the input file and update ofname if an |
| * original name was given and tostdout is not set. |
| * Return the compression method, -1 for error, -2 for warning. |
| * Set inptr to the offset of the next byte to be processed. |
| * Updates time_stamp if there is one and --no-time is not used. |
| * This function may be called repeatedly for an input file consisting |
| * of several contiguous gzip'ed members. |
| * IN assertions: there is at least one remaining compressed member. |
| * If the member is a zip file, it must be the only one. |
| */ |
| static int get_method(in) |
| int in; /* input file descriptor */ |
| { |
| uch flags; /* compression flags */ |
| char magic[2]; /* magic header */ |
| long header_bytes = 0; /* number of bytes in gzip header */ |
| |
| magic[0] = (char) get_byte(); |
| magic[1] = (char) get_byte(); |
| method = -1; /* unknown yet */ |
| part_nb++; /* number of parts in gzip file */ |
| last_member = RECORD_IO; |
| /* assume multiple members in gzip file except for record oriented I/O */ |
| |
| if (memcmp(magic, GZIP_MAGIC, 2) == 0) { |
| |
| method = (int) get_byte(); |
| if (method != DEFLATED) { |
| error_msg("unknown method %d -- get newer version of gzip\n", method); |
| exit_code = ERROR; |
| return -1; |
| } |
| flags = (uch) get_byte(); |
| |
| (ulg) get_byte(); /* Ignore time stamp */ |
| (ulg) get_byte(); |
| (ulg) get_byte(); |
| (ulg) get_byte(); |
| |
| (void) get_byte(); /* Ignore extra flags for the moment */ |
| (void) get_byte(); /* Ignore OS type for the moment */ |
| |
| if ((flags & EXTRA_FIELD) != 0) { |
| unsigned len = (unsigned) get_byte(); |
| len |= ((unsigned) get_byte()) << 8; |
| while (len--) |
| (void) get_byte(); |
| } |
| |
| /* Discard original name if any */ |
| if ((flags & ORIG_NAME) != 0) { |
| while (get_byte() != 0); /* null */ |
| } |
| |
| /* Discard file comment if any */ |
| if ((flags & COMMENT) != 0) { |
| while (get_byte() != 0) /* null */ |
| ; |
| } |
| if (part_nb == 1) { |
| header_bytes = inptr + 2 * sizeof(long); /* include crc and size */ |
| } |
| |
| } |
| |
| if (method >= 0) |
| return method; |
| |
| if (part_nb == 1) { |
| fprintf(stderr, "\nnot in gzip format\n"); |
| exit_code = ERROR; |
| return -1; |
| } else { |
| fprintf(stderr, "\ndecompression OK, trailing garbage ignored\n"); |
| if (exit_code == OK) |
| exit_code = WARNING; |
| return -2; |
| } |
| } |
| |
| /* ======================================================================== |
| * Signal and error handler. |
| */ |
| void abort_gzip() |
| { |
| exit(ERROR); |
| } |
| |
| /* =========================================================================== |
| * Run a set of bytes through the crc shift register. If s is a NULL |
| * pointer, then initialize the crc shift register contents instead. |
| * Return the current crc in either case. |
| */ |
| ulg updcrc(s, n) |
| uch *s; /* pointer to bytes to pump through */ |
| unsigned n; /* number of bytes in s[] */ |
| { |
| static ulg crc = (ulg) 0xffffffffL; /* shift register contents */ |
| register ulg c; /* temporary variable */ |
| static unsigned long crc_32_tab[256]; |
| if (crc_table_empty) { |
| unsigned long c; /* crc shift register */ |
| unsigned long e; /* polynomial exclusive-or pattern */ |
| int i; /* counter for all possible eight bit values */ |
| int k; /* byte being shifted into crc apparatus */ |
| |
| /* terms of polynomial defining this crc (except x^32): */ |
| static int p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; |
| |
| /* Make exclusive-or pattern from polynomial (0xedb88320) */ |
| e = 0; |
| for (i = 0; i < sizeof(p)/sizeof(int); i++) |
| e |= 1L << (31 - p[i]); |
| |
| /* Compute and print table of CRC's, five per line */ |
| crc_32_tab[0] = 0x00000000L; |
| for (i = 1; i < 256; i++) { |
| c = i; |
| /* The idea to initialize the register with the byte instead of |
| * zero was stolen from Haruhiko Okumura's ar002 |
| */ |
| for (k = 8; k; k--) |
| c = c & 1 ? (c >> 1) ^ e : c >> 1; |
| crc_32_tab[i]=c; |
| } |
| } |
| |
| if (s == NULL) { |
| c = 0xffffffffL; |
| } else { |
| c = crc; |
| if (n) |
| do { |
| c = crc_32_tab[((int) c ^ (*s++)) & 0xff] ^ (c >> 8); |
| } while (--n); |
| } |
| crc = c; |
| return c ^ 0xffffffffL; /* (instead of ~c for 64-bit machines) */ |
| } |
| |
| void write_error_msg() |
| { |
| fprintf(stderr, "\n"); |
| perror(""); |
| abort_gzip(); |
| } |
| |
| /* =========================================================================== |
| * Does the same as write(), but also handles partial pipe writes and checks |
| * for error return. |
| */ |
| void write_buf(fd, buf, cnt) |
| int fd; |
| void * buf; |
| unsigned cnt; |
| { |
| unsigned n; |
| |
| while ((n = write(fd, buf, cnt)) != cnt) { |
| if (n == (unsigned) (-1)) { |
| write_error_msg(); |
| } |
| cnt -= n; |
| buf = (void *) ((char *) buf + n); |
| } |
| } |
| |
| /* =========================================================================== |
| * Write the output window window[0..outcnt-1] and update crc and bytes_out. |
| * (Used for the decompressed data only.) |
| */ |
| void flush_window() |
| { |
| if (outcnt == 0) |
| return; |
| updcrc(window, outcnt); |
| |
| if (!test_mode) |
| write_buf(ofd, (char *) window, outcnt); |
| bytes_out += (ulg) outcnt; |
| outcnt = 0; |
| } |
| |
| int inflate_stored() |
| /* "decompress" an inflated type 0 (stored) block. */ |
| { |
| unsigned n; /* number of bytes in block */ |
| unsigned w; /* current window position */ |
| register ulg b; /* bit buffer */ |
| register unsigned k; /* number of bits in bit buffer */ |
| |
| /* make local copies of globals */ |
| b = bb; /* initialize bit buffer */ |
| k = bk; |
| w = outcnt; /* initialize window position */ |
| |
| /* go to byte boundary */ |
| n = k & 7; |
| DUMPBITS(n); |
| |
| /* get the length and its complement */ |
| NEEDBITS(16) |
| n = ((unsigned) b & 0xffff); |
| DUMPBITS(16) |
| NEEDBITS(16) |
| if (n != (unsigned) ((~b) & 0xffff)) |
| return 1; /* error in compressed data */ |
| DUMPBITS(16) |
| |
| /* read and output the compressed data */ |
| while (n--) { |
| NEEDBITS(8) |
| window[w++] = (uch) b; |
| if (w == WSIZE) { |
| // flush_output(w); |
| outcnt=(w), |
| flush_window(); |
| w = 0; |
| } |
| DUMPBITS(8) |
| } |
| |
| /* restore the globals from the locals */ |
| outcnt = w; /* restore global window pointer */ |
| bb = b; /* restore global bit buffer */ |
| bk = k; |
| return 0; |
| } |
| |
| int huft_free(t) |
| struct huft *t; /* table to free */ |
| |
| /* Free the malloc'ed tables built by huft_build(), which makes a linked |
| list of the tables it made, with the links in a dummy first entry of |
| each table. */ |
| { |
| register struct huft *p, *q; |
| |
| /* Go through linked list, freeing from the malloced (t[-1]) address. */ |
| p = t; |
| while (p != (struct huft *) NULL) { |
| q = (--p)->v.t; |
| free((char *) p); |
| p = q; |
| } |
| return 0; |
| } |
| |
| |
| int huft_build(b, n, s, d, e, t, m) |
| unsigned *b; /* code lengths in bits (all assumed <= BMAX) */ |
| unsigned n; /* number of codes (assumed <= N_MAX) */ |
| unsigned s; /* number of simple-valued codes (0..s-1) */ |
| ush *d; /* list of base values for non-simple codes */ |
| ush *e; /* list of extra bits for non-simple codes */ |
| struct huft **t; /* result: starting table */ |
| int *m; /* maximum lookup bits, returns actual */ |
| |
| /* Given a list of code lengths and a maximum table size, make a set of |
| tables to decode that set of codes. Return zero on success, one if |
| the given code set is incomplete (the tables are still built in this |
| case), two if the input is invalid (all zero length codes or an |
| oversubscribed set of lengths), and three if not enough memory. */ |
| { |
| unsigned a; /* counter for codes of length k */ |
| unsigned c[BMAX + 1]; /* bit length count table */ |
| unsigned f; /* i repeats in table every f entries */ |
| int g; /* maximum code length */ |
| int h; /* table level */ |
| register unsigned i; /* counter, current code */ |
| register unsigned j; /* counter */ |
| register int k; /* number of bits in current code */ |
| int l; /* bits per table (returned in m) */ |
| register unsigned *p; /* pointer into c[], b[], or v[] */ |
| register struct huft *q; /* points to current table */ |
| struct huft r; /* table entry for structure assignment */ |
| struct huft *u[BMAX]; /* table stack */ |
| unsigned v[N_MAX]; /* values in order of bit length */ |
| register int w; /* bits before this table == (l * h) */ |
| unsigned x[BMAX + 1]; /* bit offsets, then code stack */ |
| unsigned *xp; /* pointer into x */ |
| int y; /* number of dummy codes added */ |
| unsigned z; /* number of entries in current table */ |
| |
| /* Generate counts for each bit length */ |
| memset ((void *)(c), 0, sizeof(c)); |
| p = b; |
| i = n; |
| do { |
| Tracecv(*p,(stderr, (n - i >= ' ' && n - i <= '~' ? "%c %d\n" : "0x%x %d\n"), n - i, *p)); |
| c[*p]++; /* assume all entries <= BMAX */ |
| p++; /* Can't combine with above line (Solaris bug) */ |
| } while (--i); |
| if (c[0] == n) { /* null input--all zero length codes */ |
| *t = (struct huft *) NULL; |
| *m = 0; |
| return 0; |
| } |
| |
| /* Find minimum and maximum length, bound *m by those */ |
| l = *m; |
| for (j = 1; j <= BMAX; j++) |
| if (c[j]) |
| break; |
| k = j; /* minimum code length */ |
| if ((unsigned) l < j) |
| l = j; |
| for (i = BMAX; i; i--) |
| if (c[i]) |
| break; |
| g = i; /* maximum code length */ |
| if ((unsigned) l > i) |
| l = i; |
| *m = l; |
| |
| /* Adjust last length count to fill out codes, if needed */ |
| for (y = 1 << j; j < i; j++, y <<= 1) |
| if ((y -= c[j]) < 0) |
| return 2; /* bad input: more codes than bits */ |
| if ((y -= c[i]) < 0) |
| return 2; |
| c[i] += y; |
| |
| /* Generate starting offsets into the value table for each length */ |
| x[1] = j = 0; |
| p = c + 1; |
| xp = x + 2; |
| while (--i) { /* note that i == g from above */ |
| *xp++ = (j += *p++); |
| } |
| |
| /* Make a table of values in order of bit lengths */ |
| p = b; |
| i = 0; |
| do { |
| if ((j = *p++) != 0) |
| v[x[j]++] = i; |
| } while (++i < n); |
| |
| /* Generate the Huffman codes and for each, make the table entries */ |
| x[0] = i = 0; /* first Huffman code is zero */ |
| p = v; /* grab values in bit order */ |
| h = -1; /* no tables yet--level -1 */ |
| w = -l; /* bits decoded == (l * h) */ |
| u[0] = (struct huft *) NULL; /* just to keep compilers happy */ |
| q = (struct huft *) NULL; /* ditto */ |
| z = 0; /* ditto */ |
| |
| /* go through the bit lengths (k already is bits in shortest code) */ |
| for (; k <= g; k++) { |
| a = c[k]; |
| while (a--) { |
| /* here i is the Huffman code of length k bits for value *p */ |
| /* make tables up to required level */ |
| while (k > w + l) { |
| h++; |
| w += l; /* previous table always l bits */ |
| |
| /* compute minimum size table less than or equal to l bits */ |
| z = (z = g - w) > (unsigned) l ? l : z; /* upper limit on table size */ |
| if ((f = 1 << (j = k - w)) > a + 1) { /* try a k-w bit table *//* too few codes for k-w bit table */ |
| f -= a + 1; /* deduct codes from patterns left */ |
| xp = c + k; |
| while (++j < z) { /* try smaller tables up to z bits */ |
| if ((f <<= 1) <= *++xp) |
| break; /* enough codes to use up j bits */ |
| f -= *xp; /* else deduct codes from patterns */ |
| } |
| } |
| z = 1 << j; /* table entries for j-bit table */ |
| |
| /* allocate and link in new table */ |
| if ( |
| (q = |
| (struct huft *) malloc((z + 1) * |
| sizeof(struct huft))) == |
| (struct huft *) NULL) { |
| if (h) |
| huft_free(u[0]); |
| return 3; /* not enough memory */ |
| } |
| hufts += z + 1; /* track memory usage */ |
| *t = q + 1; /* link to list for huft_free() */ |
| *(t = &(q->v.t)) = (struct huft *) NULL; |
| u[h] = ++q; /* table starts after link */ |
| |
| /* connect to last table, if there is one */ |
| if (h) { |
| x[h] = i; /* save pattern for backing up */ |
| r.b = (uch) l; /* bits to dump before this table */ |
| r.e = (uch) (16 + j); /* bits in this table */ |
| r.v.t = q; /* pointer to this table */ |
| j = i >> (w - l); /* (get around Turbo C bug) */ |
| u[h - 1][j] = r; /* connect to last table */ |
| } |
| } |
| |
| /* set up table entry in r */ |
| r.b = (uch) (k - w); |
| if (p >= v + n) |
| r.e = 99; /* out of values--invalid code */ |
| else if (*p < s) { |
| r.e = (uch) (*p < 256 ? 16 : 15); /* 256 is end-of-block code */ |
| r.v.n = (ush) (*p); /* simple code is just the value */ |
| p++; /* one compiler does not like *p++ */ |
| } else { |
| r.e = (uch) e[*p - s]; /* non-simple--look up in lists */ |
| r.v.n = d[*p++ - s]; |
| } |
| |
| /* fill code-like entries with r */ |
| f = 1 << (k - w); |
| for (j = i >> w; j < z; j += f) |
| q[j] = r; |
| |
| /* backwards increment the k-bit code i */ |
| for (j = 1 << (k - 1); i & j; j >>= 1) |
| i ^= j; |
| i ^= j; |
| |
| /* backup over finished tables */ |
| while ((i & ((1 << w) - 1)) != x[h]) { |
| h--; /* don't need to update q */ |
| w -= l; |
| } |
| } |
| } |
| /* Return true (1) if we were given an incomplete table */ |
| return y != 0 && g != 1; |
| } |
| |
| |
| int inflate_codes(tl, td, bl, bd) |
| struct huft *tl, *td; /* literal/length and distance decoder tables */ |
| int bl, bd; /* number of bits decoded by tl[] and td[] */ |
| |
| /* inflate (decompress) the codes in a deflated (compressed) block. |
| Return an error code or zero if it all goes ok. */ |
| { |
| register unsigned e; /* table entry flag/number of extra bits */ |
| unsigned n, d; /* length and index for copy */ |
| unsigned w; /* current window position */ |
| struct huft *t; /* pointer to table entry */ |
| unsigned ml, md; /* masks for bl and bd bits */ |
| register ulg b; /* bit buffer */ |
| register unsigned k; /* number of bits in bit buffer */ |
| |
| /* make local copies of globals */ |
| b = bb; /* initialize bit buffer */ |
| k = bk; |
| w = outcnt; /* initialize window position */ |
| |
| /* inflate the coded data */ |
| ml = mask_bits[bl]; /* precompute masks for speed */ |
| md = mask_bits[bd]; |
| for (;;) { /* do until end of block */ |
| NEEDBITS((unsigned) bl) |
| if ((e = (t = tl + ((unsigned) b & ml))->e) > 16) |
| do { |
| if (e == 99) |
| return 1; |
| DUMPBITS(t->b) |
| e -= 16; |
| NEEDBITS(e) |
| } while ((e = (t = t->v.t + ((unsigned) b & mask_bits[e]))->e) |
| > 16); |
| DUMPBITS(t->b) |
| if (e == 16) { /* then it's a literal */ |
| window[w++] = (uch) t->v.n; |
| Tracevv((stderr, "%c", window[w - 1])); |
| if (w == WSIZE) { |
| // flush_output(w); |
| outcnt=(w), |
| flush_window(); |
| w = 0; |
| } |
| } else { /* it's an EOB or a length */ |
| |
| /* exit if end of block */ |
| if (e == 15) |
| break; |
| |
| /* get length of block to copy */ |
| NEEDBITS(e) |
| n = t->v.n + ((unsigned) b & mask_bits[e]); |
| DUMPBITS(e); |
| |
| /* decode distance of block to copy */ |
| NEEDBITS((unsigned) bd) |
| if ((e = (t = td + ((unsigned) b & md))->e) > 16) |
| do { |
| if (e == 99) |
| return 1; |
| DUMPBITS(t->b) |
| e -= 16; |
| NEEDBITS(e) |
| } |
| while ( |
| (e = |
| (t = |
| t->v.t + ((unsigned) b & mask_bits[e]))->e) > |
| 16); |
| DUMPBITS(t->b) |
| NEEDBITS(e) |
| d = w - t->v.n - ((unsigned) b & mask_bits[e]); |
| DUMPBITS(e) |
| Tracevv((stderr, "\\[%d,%d]", w - d, n)); |
| |
| /* do the copy */ |
| do { |
| n -= (e = |
| (e = |
| WSIZE - ((d &= WSIZE - 1) > w ? d : w)) > |
| n ? n : e); |
| #if !defined(NOMEMCPY) && !defined(DEBUG) |
| if (w - d >= e) { /* (this test assumes unsigned comparison) */ |
| memcpy(window + w, window + d, e); |
| w += e; |
| d += e; |
| } else /* do it slow to avoid memcpy() overlap */ |
| #endif /* !NOMEMCPY */ |
| do { |
| window[w++] = window[d++]; |
| Tracevv((stderr, "%c", window[w - 1])); |
| } while (--e); |
| if (w == WSIZE) { |
| // flush_output(w); |
| outcnt=(w), |
| flush_window(); |
| w = 0; |
| } |
| } while (n); |
| } |
| } |
| |
| /* restore the globals from the locals */ |
| outcnt = w; /* restore global window pointer */ |
| bb = b; /* restore global bit buffer */ |
| bk = k; |
| |
| /* done */ |
| return 0; |
| } |
| |
| int inflate_fixed() |
| /* decompress an inflated type 1 (fixed Huffman codes) block. We should |
| either replace this with a custom decoder, or at least precompute the |
| Huffman tables. */ |
| { |
| int i; /* temporary variable */ |
| struct huft *tl; /* literal/length code table */ |
| struct huft *td; /* distance code table */ |
| int bl; /* lookup bits for tl */ |
| int bd; /* lookup bits for td */ |
| unsigned l[288]; /* length list for huft_build */ |
| |
| /* set up literal table */ |
| for (i = 0; i < 144; i++) |
| l[i] = 8; |
| for (; i < 256; i++) |
| l[i] = 9; |
| for (; i < 280; i++) |
| l[i] = 7; |
| for (; i < 288; i++) /* make a complete, but wrong code set */ |
| l[i] = 8; |
| bl = 7; |
| if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0) |
| return i; |
| |
| /* set up distance table */ |
| for (i = 0; i < 30; i++) /* make an incomplete code set */ |
| l[i] = 5; |
| bd = 5; |
| if ((i = huft_build(l, 30, 0, cpdist, cpdext, &td, &bd)) > 1) { |
| huft_free(tl); |
| return i; |
| } |
| |
| /* decompress until an end-of-block code */ |
| if (inflate_codes(tl, td, bl, bd)) |
| return 1; |
| |
| /* free the decoding tables, return */ |
| huft_free(tl); |
| huft_free(td); |
| return 0; |
| } |
| |
| int inflate_dynamic() |
| /* decompress an inflated type 2 (dynamic Huffman codes) block. */ |
| { |
| int dbits = 6; /* bits in base distance lookup table */ |
| int lbits = 9; /* bits in base literal/length lookup table */ |
| |
| int i; /* temporary variables */ |
| unsigned j; |
| unsigned l; /* last length */ |
| unsigned m; /* mask for bit lengths table */ |
| unsigned n; /* number of lengths to get */ |
| struct huft *tl; /* literal/length code table */ |
| struct huft *td; /* distance code table */ |
| int bl; /* lookup bits for tl */ |
| int bd; /* lookup bits for td */ |
| unsigned nb; /* number of bit length codes */ |
| unsigned nl; /* number of literal/length codes */ |
| unsigned nd; /* number of distance codes */ |
| |
| #ifdef PKZIP_BUG_WORKAROUND |
| unsigned ll[288 + 32]; /* literal/length and distance code lengths */ |
| #else |
| unsigned ll[286 + 30]; /* literal/length and distance code lengths */ |
| #endif |
| register ulg b; /* bit buffer */ |
| register unsigned k; /* number of bits in bit buffer */ |
| |
| /* make local bit buffer */ |
| b = bb; |
| k = bk; |
| |
| /* read in table lengths */ |
| NEEDBITS(5) |
| nl = 257 + ((unsigned) b & 0x1f); /* number of literal/length codes */ |
| DUMPBITS(5) |
| NEEDBITS(5) |
| nd = 1 + ((unsigned) b & 0x1f); /* number of distance codes */ |
| DUMPBITS(5) |
| NEEDBITS(4) |
| nb = 4 + ((unsigned) b & 0xf); /* number of bit length codes */ |
| DUMPBITS(4) |
| #ifdef PKZIP_BUG_WORKAROUND |
| if (nl > 288 || nd > 32) |
| #else |
| if (nl > 286 || nd > 30) |
| #endif |
| return 1; /* bad lengths */ |
| |
| /* read in bit-length-code lengths */ |
| for (j = 0; j < nb; j++) { |
| NEEDBITS(3) |
| ll[border[j]] = (unsigned) b & 7; |
| DUMPBITS(3) |
| } |
| for (; j < 19; j++) |
| ll[border[j]] = 0; |
| |
| /* build decoding table for trees--single level, 7 bit lookup */ |
| bl = 7; |
| if ((i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl)) != 0) { |
| if (i == 1) |
| huft_free(tl); |
| return i; /* incomplete code set */ |
| } |
| |
| /* read in literal and distance code lengths */ |
| n = nl + nd; |
| m = mask_bits[bl]; |
| i = l = 0; |
| while ((unsigned) i < n) { |
| NEEDBITS((unsigned) bl) |
| j = (td = tl + ((unsigned) b & m))->b; |
| DUMPBITS(j) |
| j = td->v.n; |
| if (j < 16) /* length of code in bits (0..15) */ |
| ll[i++] = l = j; /* save last length in l */ |
| else if (j == 16) { /* repeat last length 3 to 6 times */ |
| NEEDBITS(2) |
| j = 3 + ((unsigned) b & 3); |
| DUMPBITS(2) |
| if ((unsigned) i + j > n) |
| return 1; |
| while (j--) |
| ll[i++] = l; |
| } else if (j == 17) { /* 3 to 10 zero length codes */ |
| NEEDBITS(3) |
| j = 3 + ((unsigned) b & 7); |
| DUMPBITS(3) |
| if ((unsigned) i + j > n) |
| return 1; |
| while (j--) |
| ll[i++] = 0; |
| l = 0; |
| } else { /* j == 18: 11 to 138 zero length codes */ |
| |
| NEEDBITS(7) |
| j = 11 + ((unsigned) b & 0x7f); |
| DUMPBITS(7) |
| if ((unsigned) i + j > n) |
| return 1; |
| while (j--) |
| ll[i++] = 0; |
| l = 0; |
| } |
| } |
| |
| /* free decoding table for trees */ |
| huft_free(tl); |
| |
| /* restore the global bit buffer */ |
| bb = b; |
| bk = k; |
| |
| /* build the decoding tables for literal/length and distance codes */ |
| bl = lbits; |
| if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0) { |
| if (i == 1) { |
| fprintf(stderr, " incomplete literal tree\n"); |
| huft_free(tl); |
| } |
| return i; /* incomplete code set */ |
| } |
| bd = dbits; |
| if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0) { |
| if (i == 1) { |
| fprintf(stderr, " incomplete distance tree\n"); |
| huft_free(td); |
| } |
| huft_free(tl); |
| return i; /* incomplete code set */ |
| } |
| |
| /* decompress until an end-of-block code */ |
| if (inflate_codes(tl, td, bl, bd)) |
| return 1; |
| |
| /* free the decoding tables, return */ |
| huft_free(tl); |
| huft_free(td); |
| return 0; |
| } |
| |
| /* decompress an inflated block */ |
| int inflate_block(e) |
| int *e; /* last block flag */ |
| { |
| unsigned t; /* block type */ |
| register ulg b; /* bit buffer */ |
| register unsigned k; /* number of bits in bit buffer */ |
| |
| /* make local bit buffer */ |
| b = bb; |
| k = bk; |
| |
| /* read in last block bit */ |
| NEEDBITS(1) |
| * e = (int) b & 1; |
| DUMPBITS(1) |
| |
| /* read in block type */ |
| NEEDBITS(2) |
| t = (unsigned) b & 3; |
| DUMPBITS(2) |
| |
| /* restore the global bit buffer */ |
| bb = b; |
| bk = k; |
| |
| /* inflate that block type */ |
| if (t == 2) |
| return inflate_dynamic(); |
| if (t == 0) |
| return inflate_stored(); |
| if (t == 1) |
| return inflate_fixed(); |
| |
| /* bad block type */ |
| return 2; |
| } |
| |
| int inflate() |
| /* decompress an inflated entry */ |
| { |
| int e; /* last block flag */ |
| int r; /* result code */ |
| unsigned h; /* maximum struct huft's malloc'ed */ |
| |
| /* initialize window, bit buffer */ |
| outcnt = 0; |
| bk = 0; |
| bb = 0; |
| |
| /* decompress until the last block */ |
| h = 0; |
| do { |
| hufts = 0; |
| if ((r = inflate_block(&e)) != 0) |
| return r; |
| if (hufts > h) |
| h = hufts; |
| } while (!e); |
| |
| /* Undo too much lookahead. The next read will be byte aligned so we |
| * can discard unused bits in the last meaningful byte. |
| */ |
| while (bk >= 8) { |
| bk -= 8; |
| inptr--; |
| } |
| |
| /* flush out window */ |
| outcnt=(outcnt), |
| flush_window(); |
| /* return success */ |
| #ifdef DEBUG |
| fprintf(stderr, "<%u> ", h); |
| #endif /* DEBUG */ |
| return 0; |
| } |
| |
| /* =========================================================================== |
| * Unzip in to out. This routine works on both gzip and pkzip files. |
| * |
| * IN assertions: the buffer inbuf contains already the beginning of |
| * the compressed data, from offsets inptr to insize-1 included. |
| * The magic header has already been checked. The output buffer is cleared. |
| */ |
| extern int unzip(in, out) |
| int in, out; /* input and output file descriptors */ |
| { |
| int ext_header = 0; /* set if extended local header */ |
| int pkzip = 0; /* set for a pkzip file */ |
| ulg orig_crc = 0; /* original crc */ |
| ulg orig_len = 0; /* original uncompressed length */ |
| int n; |
| uch buf[EXTHDR]; /* extended local header */ |
| |
| ifd = in; |
| ofd = out; |
| method = get_method(ifd); |
| if (method < 0) { |
| exit(exit_code); /* error message already emitted */ |
| } |
| |
| updcrc(NULL, 0); /* initialize crc */ |
| |
| if (pkzip && !ext_header) { /* crc and length at the end otherwise */ |
| orig_crc = LG(inbuf + LOCCRC); |
| orig_len = LG(inbuf + LOCLEN); |
| } |
| |
| /* Decompress */ |
| if (method == DEFLATED) { |
| |
| int res = inflate(); |
| |
| if (res == 3) { |
| error_msg(memory_exhausted); |
| } else if (res != 0) { |
| error_msg("invalid compressed data--format violated\n"); |
| } |
| |
| } else { |
| error_msg("internal error, invalid method\n"); |
| } |
| |
| /* Get the crc and original length */ |
| if (!pkzip) { |
| /* crc32 (see algorithm.doc) |
| * uncompressed input size modulo 2^32 |
| */ |
| for (n = 0; n < 8; n++) { |
| buf[n] = (uch) get_byte(); /* may cause an error if EOF */ |
| } |
| orig_crc = LG(buf); |
| orig_len = LG(buf + 4); |
| |
| } else if (ext_header) { /* If extended header, check it */ |
| /* signature - 4bytes: 0x50 0x4b 0x07 0x08 |
| * CRC-32 value |
| * compressed size 4-bytes |
| * uncompressed size 4-bytes |
| */ |
| for (n = 0; n < EXTHDR; n++) { |
| buf[n] = (uch) get_byte(); /* may cause an error if EOF */ |
| } |
| orig_crc = LG(buf + 4); |
| orig_len = LG(buf + 12); |
| } |
| |
| /* Validate decompression */ |
| if (orig_crc != updcrc(outbuf, 0)) { |
| error_msg("invalid compressed data--crc error\n"); |
| } |
| if (orig_len != (ulg) bytes_out) { |
| error_msg("invalid compressed data--length error\n"); |
| } |
| |
| /* Check if there are more entries in a pkzip file */ |
| if (pkzip && inptr + 4 < insize && LG(inbuf + inptr) == LOCSIG) { |
| fprintf(stderr, "has more than one entry--rest ignored\n"); |
| if (exit_code == OK) |
| exit_code = WARNING; |
| } |
| ext_header = pkzip = 0; /* for next file */ |
| return OK; |
| } |
| |
| |
| /* =========================================================================== |
| * Clear input and output buffers |
| */ |
| void clear_bufs(void) |
| { |
| outcnt = 0; |
| insize = inptr = 0; |
| bytes_in = bytes_out = 0L; |
| } |
| |
| /* =========================================================================== |
| * Initialize gunzip buffers and signals |
| */ |
| extern int gunzip_init() |
| { |
| foreground = signal(SIGINT, SIG_IGN) != SIG_IGN; |
| if (foreground) { |
| (void) signal(SIGINT, (sig_type) abort_gzip); |
| } |
| #ifdef SIGTERM |
| if (signal(SIGTERM, SIG_IGN) != SIG_IGN) { |
| (void) signal(SIGTERM, (sig_type) abort_gzip); |
| } |
| #endif |
| #ifdef SIGHUP |
| if (signal(SIGHUP, SIG_IGN) != SIG_IGN) { |
| (void) signal(SIGHUP, (sig_type) abort_gzip); |
| } |
| #endif |
| |
| /* Allocate all global buffers (for DYN_ALLOC option) */ |
| inbuf = xmalloc((size_t)((INBUFSIZ+INBUF_EXTRA+1L)*sizeof(uch))); |
| outbuf = xmalloc((size_t)((OUTBUFSIZ+OUTBUF_EXTRA+1L)*sizeof(uch))); |
| d_buf = xmalloc((size_t)((DIST_BUFSIZE+1L)*sizeof(ush))); |
| window = xmalloc((size_t)(((2L*WSIZE)+1L)*sizeof(uch))); |
| tab_prefix0 = xmalloc((size_t)(((1L<<(BITS-1))+1L)*sizeof(ush))); |
| tab_prefix1 = xmalloc((size_t)(((1L<<(BITS-1))+1L)*sizeof(ush))); |
| |
| clear_bufs(); /* clear input and output buffers */ |
| part_nb = 0; |
| return(EXIT_SUCCESS); |
| } |
| |
| |
| /* ======================================================================== */ |
| int gunzip_main(int argc, char **argv) |
| { |
| int tostdout = 0; |
| int fromstdin = 0; |
| int result; |
| int inFileNum; |
| int outFileNum; |
| int delInputFile = 0; |
| int force = 0; |
| struct stat statBuf; |
| char *delFileName; |
| char ifname[MAX_PATH_LEN + 1]; /* input file name */ |
| char ofname[MAX_PATH_LEN + 1]; /* output file name */ |
| |
| if (strcmp(applet_name, "zcat") == 0) { |
| force = 1; |
| tostdout = 1; |
| } |
| |
| /* Parse any options */ |
| while (--argc > 0 && **(++argv) == '-') { |
| if (*((*argv) + 1) == '\0') { |
| tostdout = 1; |
| } |
| while (*(++(*argv))) { |
| switch (**argv) { |
| case 'c': |
| tostdout = 1; |
| break; |
| case 't': |
| test_mode = 1; |
| break; |
| case 'f': |
| force = 1; |
| break; |
| default: |
| usage(gunzip_usage); |
| } |
| } |
| } |
| |
| if (argc <= 0) { |
| tostdout = 1; |
| fromstdin = 1; |
| } |
| |
| if (isatty(fileno(stdin)) && fromstdin==1 && force==0) |
| error_msg_and_die( "data not read from terminal. Use -f to force it.\n"); |
| if (isatty(fileno(stdout)) && tostdout==1 && force==0) |
| error_msg_and_die( "data not written to terminal. Use -f to force it.\n"); |
| |
| gunzip_init(); |
| |
| if (fromstdin == 1) { |
| strcpy(ofname, "stdin"); |
| |
| inFileNum = fileno(stdin); |
| ifile_size = -1L; /* convention for unknown size */ |
| } else { |
| /* Open up the input file */ |
| if (argc <= 0) |
| usage(gunzip_usage); |
| if (strlen(*argv) > MAX_PATH_LEN) { |
| error_msg(name_too_long); |
| exit(WARNING); |
| } |
| strcpy(ifname, *argv); |
| |
| /* Open input fille */ |
| inFileNum = open(ifname, O_RDONLY); |
| if (inFileNum < 0) { |
| perror(ifname); |
| exit(WARNING); |
| } |
| /* Get the time stamp on the input file. */ |
| result = stat(ifname, &statBuf); |
| if (result < 0) { |
| perror(ifname); |
| exit(WARNING); |
| } |
| ifile_size = statBuf.st_size; |
| } |
| |
| if (tostdout == 1) { |
| /* And get to work */ |
| strcpy(ofname, "stdout"); |
| outFileNum = fileno(stdout); |
| |
| /* Actually do the compression/decompression. */ |
| unzip(inFileNum, outFileNum); |
| |
| } else if (test_mode) { |
| /* Actually do the compression/decompression. */ |
| unzip(inFileNum, 2); |
| } else { |
| char *pos; |
| |
| /* And get to work */ |
| if (strlen(ifname) > MAX_PATH_LEN - 4) { |
| error_msg(name_too_long); |
| exit(WARNING); |
| } |
| strcpy(ofname, ifname); |
| pos = strstr(ofname, ".gz"); |
| if (pos != NULL) { |
| *pos = '\0'; |
| delInputFile = 1; |
| } else { |
| pos = strstr(ofname, ".tgz"); |
| if (pos != NULL) { |
| *pos = '\0'; |
| strcat(pos, ".tar"); |
| delInputFile = 1; |
| } |
| } |
| |
| /* Open output fille */ |
| #if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 1) |
| outFileNum = open(ofname, O_RDWR | O_CREAT | O_EXCL | O_NOFOLLOW); |
| #else |
| outFileNum = open(ofname, O_RDWR | O_CREAT | O_EXCL); |
| #endif |
| if (outFileNum < 0) { |
| perror(ofname); |
| exit(WARNING); |
| } |
| /* Set permissions on the file */ |
| fchmod(outFileNum, statBuf.st_mode); |
| |
| /* Actually do the compression/decompression. */ |
| result = unzip(inFileNum, outFileNum); |
| |
| close(outFileNum); |
| close(inFileNum); |
| /* Delete the original file */ |
| if (result == OK) |
| delFileName = ifname; |
| else |
| delFileName = ofname; |
| |
| if (delInputFile == 1 && unlink(delFileName) < 0) { |
| perror(delFileName); |
| return EXIT_FAILURE; |
| } |
| } |
| return(exit_code); |
| } |