| /* vi: set sw=4 ts=4: */ |
| /* |
| * Derived from |
| * mapscrn.c - version 0.92 |
| * |
| * Was taken from console-tools and adapted by |
| * Peter Novodvorsky <petya@logic.ru> |
| */ |
| |
| #include "busybox.h" |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <memory.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <assert.h> |
| #include <errno.h> |
| #include <signal.h> |
| #include <sys/types.h> |
| #include <sys/ioctl.h> |
| #include <sys/kd.h> |
| |
| typedef unsigned short unicode; |
| |
| static long int ctoi(unsigned char *s, int *is_unicode); |
| int old_screen_map_read_ascii(FILE * fp, unsigned char buf[]); |
| int uni_screen_map_read_ascii(FILE * fp, unicode buf[], int *is_unicode); |
| unicode utf8_to_ucs2(char *buf); |
| int screen_map_load(int fd, FILE * fp); |
| |
| int loadacm_main(int argc, char **argv) |
| { |
| int fd; |
| |
| if (argc>=2 && *argv[1]=='-') { |
| usage(loadacm_usage); |
| } |
| |
| fd = open("/dev/tty", O_RDWR); |
| if (fd < 0) { |
| perror_msg_and_die("Error opening /dev/tty1"); |
| } |
| |
| if (screen_map_load(fd, stdin)) { |
| perror_msg_and_die("Error loading acm"); |
| } |
| |
| write(fd, "\033(K", 3); |
| |
| return EXIT_SUCCESS; |
| } |
| |
| int screen_map_load(int fd, FILE * fp) |
| { |
| struct stat stbuf; |
| unicode wbuf[E_TABSZ]; |
| unsigned char buf[E_TABSZ]; |
| int parse_failed = 0; |
| int is_unicode; |
| |
| if (fstat(fileno(fp), &stbuf)) |
| perror_msg_and_die("Cannot stat map file"); |
| |
| /* first try a UTF screen-map: either ASCII (no restriction) or binary (regular file) */ |
| if (! |
| (parse_failed = |
| (-1 == uni_screen_map_read_ascii(fp, wbuf, &is_unicode))) |
| || (S_ISREG(stbuf.st_mode) && (stbuf.st_size == (sizeof(unicode) * E_TABSZ)))) { /* test for binary UTF map by size */ |
| if (parse_failed) { |
| if (-1 == fseek(fp, 0, SEEK_SET)) { |
| if (errno == ESPIPE) |
| error_msg_and_die("16bit screen-map MUST be a regular file.\n"); |
| else |
| perror_msg_and_die("fseek failed reading binary 16bit screen-map"); |
| } |
| |
| if (fread(wbuf, sizeof(unicode) * E_TABSZ, 1, fp) != 1) |
| perror_msg_and_die("Cannot read [new] map from file"); |
| #if 0 |
| else |
| error_msg("Input screen-map is binary.\n"); |
| #endif |
| } |
| |
| /* if it was effectively a 16-bit ASCII, OK, else try to read as 8-bit map */ |
| /* same if it was binary, ie. if parse_failed */ |
| if (parse_failed || is_unicode) { |
| if (ioctl(fd, PIO_UNISCRNMAP, wbuf)) |
| perror_msg_and_die("PIO_UNISCRNMAP ioctl"); |
| else |
| return 0; |
| } |
| } |
| |
| /* rewind... */ |
| if (-1 == fseek(fp, 0, SEEK_SET)) { |
| if (errno == ESPIPE) |
| error_msg("Assuming 8bit screen-map - MUST be a regular file.\n"), |
| exit(1); |
| else |
| perror_msg_and_die("fseek failed assuming 8bit screen-map"); |
| } |
| |
| /* ... and try an old 8-bit screen-map */ |
| if (!(parse_failed = (-1 == old_screen_map_read_ascii(fp, buf))) || |
| (S_ISREG(stbuf.st_mode) && (stbuf.st_size == E_TABSZ))) { /* test for binary old 8-bit map by size */ |
| if (parse_failed) { |
| if (-1 == fseek(fp, 0, SEEK_SET)) { |
| if (errno == ESPIPE) |
| /* should not - it succedeed above */ |
| error_msg_and_die("fseek() returned ESPIPE !\n"); |
| else |
| perror_msg_and_die("fseek for binary 8bit screen-map"); |
| } |
| |
| if (fread(buf, E_TABSZ, 1, fp) != 1) |
| perror_msg_and_die("Cannot read [old] map from file"); |
| #if 0 |
| else |
| error_msg("Input screen-map is binary.\n"); |
| #endif |
| } |
| |
| if (ioctl(fd, PIO_SCRNMAP, buf)) |
| perror_msg_and_die("PIO_SCRNMAP ioctl"); |
| else |
| return 0; |
| } |
| error_msg("Error parsing symbolic map\n"); |
| return(1); |
| } |
| |
| |
| /* |
| * - reads `fp' as a 16-bit ASCII SFM file. |
| * - returns -1 on error. |
| * - returns it in `unicode' in an E_TABSZ-elements array. |
| * - sets `*is_unicode' flagiff there were any non-8-bit |
| * (ie. real 16-bit) mapping. |
| * |
| * FIXME: ignores everything after second word |
| */ |
| int uni_screen_map_read_ascii(FILE * fp, unicode buf[], int *is_unicode) |
| { |
| char buffer[256]; /* line buffer reading file */ |
| char *p, *q; /* 1st + 2nd words in line */ |
| int in, on; /* the same, as numbers */ |
| int tmp_is_unicode; /* tmp for is_unicode calculation */ |
| int i; /* loop index - result holder */ |
| int ret_code = 0; /* return code */ |
| sigset_t sigset, old_sigset; |
| |
| assert(is_unicode); |
| |
| *is_unicode = 0; |
| |
| /* first 128 codes defaults to ASCII */ |
| for (i = 0; i < 128; i++) |
| buf[i] = i; |
| /* remaining defaults to replacement char (usually E_TABSZ = 256) */ |
| for (; i < E_TABSZ; i++) |
| buf[i] = 0xfffd; |
| |
| /* block SIGCHLD */ |
| sigemptyset(&sigset); |
| sigaddset(&sigset, SIGCHLD); |
| sigprocmask(SIG_BLOCK, &sigset, &old_sigset); |
| |
| do { |
| if (NULL == fgets(buffer, sizeof(buffer), fp)) { |
| if (feof(fp)) |
| break; |
| else |
| perror_msg_and_die("uni_screen_map_read_ascii() can't read line"); |
| } |
| |
| /* get "charset-relative charcode", stripping leading spaces */ |
| p = strtok(buffer, " \t\n"); |
| |
| /* skip empty lines and comments */ |
| if (!p || *p == '#') |
| continue; |
| |
| /* get unicode mapping */ |
| q = strtok(NULL, " \t\n"); |
| if (q) { |
| in = ctoi(p, NULL); |
| if (in < 0 || in > 255) { |
| ret_code = -1; |
| break; |
| } |
| |
| on = ctoi(q, &tmp_is_unicode); |
| if (in < 0 && on > 65535) { |
| ret_code = -1; |
| break; |
| } |
| |
| *is_unicode |= tmp_is_unicode; |
| buf[in] = on; |
| } else { |
| ret_code = -1; |
| break; |
| } |
| } |
| while (1); /* terminated by break on feof() */ |
| |
| /* restore sig mask */ |
| sigprocmask(SIG_SETMASK, &old_sigset, NULL); |
| |
| return ret_code; |
| } |
| |
| |
| int old_screen_map_read_ascii(FILE * fp, unsigned char buf[]) |
| { |
| char buffer[256]; |
| int in, on; |
| char *p, *q; |
| |
| for (in = 0; in < 256; in++) |
| buf[in] = in; |
| |
| while (fgets(buffer, sizeof(buffer) - 1, fp)) { |
| p = strtok(buffer, " \t\n"); |
| |
| if (!p || *p == '#') |
| continue; |
| |
| q = strtok(NULL, " \t\n#"); |
| if (q) { |
| in = ctoi(p, NULL); |
| if (in < 0 || in > 255) |
| return -1; |
| |
| on = ctoi(q, NULL); |
| if (in < 0 && on > 255) |
| return -1; |
| |
| buf[in] = on; |
| } else |
| return -1; |
| } |
| |
| return (0); |
| } |
| |
| |
| /* |
| * - converts a string into an int. |
| * - supports dec and hex bytes, hex UCS2, single-quoted byte and UTF8 chars. |
| * - returns the converted value |
| * - if `is_unicode != NULL', use it to tell whether it was unicode |
| * |
| * CAVEAT: will report valid UTF mappings using only 1 byte as 8-bit ones. |
| */ |
| long int ctoi(unsigned char *s, int *is_unicode) |
| { |
| int i; |
| size_t ls; |
| |
| ls = strlen(s); |
| if (is_unicode) |
| *is_unicode = 0; |
| |
| /* hex-specified UCS2 */ |
| if ((strncmp(s, "U+", 2) == 0) && |
| (strspn(s + 2, "0123456789abcdefABCDEF") == ls - 2)) { |
| sscanf(s + 2, "%x", &i); |
| if (is_unicode) |
| *is_unicode = 1; |
| } |
| |
| /* hex-specified byte */ |
| else if ((ls <= 4) && (strncmp(s, "0x", 2) == 0) && |
| (strspn(s + 2, "0123456789abcdefABCDEF") == ls - 2)) |
| sscanf(s + 2, "%x", &i); |
| |
| /* oct-specified number (byte) */ |
| else if ((*s == '0') && (strspn(s, "01234567") == ls)) |
| sscanf(s, "%o", &i); |
| |
| /* dec-specified number (byte) */ |
| else if (strspn(s, "0123456789") == ls) |
| sscanf(s, "%d", &i); |
| |
| /* single-byte quoted char */ |
| else if ((strlen(s) == 3) && (s[0] == '\'') && (s[2] == '\'')) |
| i = s[1]; |
| |
| /* multi-byte UTF8 quoted char */ |
| else if ((s[0] == '\'') && (s[ls - 1] == '\'')) { |
| s[ls - 1] = 0; /* ensure we'll not "parse UTF too far" */ |
| i = utf8_to_ucs2(s + 1); |
| if (is_unicode) |
| *is_unicode = 1; |
| } else |
| return (-1); |
| |
| return (i); |
| } |
| |
| |
| void saveoldmap(int fd, char *omfil) |
| { |
| FILE *fp; |
| char buf[E_TABSZ]; |
| |
| #ifdef GIO_UNISCRNMAP |
| unicode xbuf[E_TABSZ]; |
| int is_old_map = 0; |
| |
| if (ioctl(fd, GIO_UNISCRNMAP, xbuf)) { |
| perror_msg("GIO_UNISCRNMAP ioctl error"); |
| #endif |
| if (ioctl(fd, GIO_SCRNMAP, buf)) |
| perror_msg_and_die("GIO_SCRNMAP ioctl error"); |
| else |
| is_old_map = 1; |
| #ifdef GIO_UNISCRNMAP |
| } |
| #endif |
| |
| fp = xfopen(omfil, "w"); |
| #ifdef GIO_UNISCRNMAP |
| if (is_old_map) { |
| #endif |
| if (fwrite(buf, E_TABSZ, 1, fp) != 1) |
| perror_msg_and_die("Error writing map to file"); |
| #ifdef GIO_UNISCRNMAP |
| } else if (fwrite(xbuf, sizeof(unicode) * E_TABSZ, 1, fp) != 1) { |
| perror_msg_and_die("Error writing map to file"); |
| } |
| #endif |
| |
| fclose(fp); |
| } |
| |
| unicode utf8_to_ucs2(char *buf) |
| { |
| int utf_count = 0; |
| long utf_char = 0; |
| unicode tc = 0; |
| unsigned char c; |
| |
| do { |
| c = *buf; |
| buf++; |
| |
| /* if byte should be part of multi-byte sequence */ |
| if (c & 0x80) { |
| /* if we have already started to parse a UTF8 sequence */ |
| if (utf_count > 0 && (c & 0xc0) == 0x80) { |
| utf_char = (utf_char << 6) | (c & 0x3f); |
| utf_count--; |
| if (utf_count == 0) |
| tc = utf_char; |
| else |
| continue; |
| } else { /* Possibly 1st char of a UTF8 sequence */ |
| |
| if ((c & 0xe0) == 0xc0) { |
| utf_count = 1; |
| utf_char = (c & 0x1f); |
| } else if ((c & 0xf0) == 0xe0) { |
| utf_count = 2; |
| utf_char = (c & 0x0f); |
| } else if ((c & 0xf8) == 0xf0) { |
| utf_count = 3; |
| utf_char = (c & 0x07); |
| } else if ((c & 0xfc) == 0xf8) { |
| utf_count = 4; |
| utf_char = (c & 0x03); |
| } else if ((c & 0xfe) == 0xfc) { |
| utf_count = 5; |
| utf_char = (c & 0x01); |
| } else |
| utf_count = 0; |
| continue; |
| } |
| } else { /* not part of multi-byte sequence - treat as ASCII |
| * this makes incomplete sequences to be ignored |
| */ |
| tc = c; |
| utf_count = 0; |
| } |
| } |
| while (utf_count); |
| |
| return tc; |
| } |