dos2unix: tiny shrink
login,su: fix setup_environment() so that it works as intended
(parameter names were a bit misleading)
fdisk: shrink
help text: shrink
function old new delta
login_main 1658 1701 +43
setup_environment 206 203 -3
dos_compatible_flag 4 1 -3
dos2unix_main 383 375 -8
get_boot 1724 1702 -22
fdisk_main 2949 2889 -60
packed_usage 24250 23948 -302
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/6 up/down: 43/-398) Total: -355 bytes
text data bss dec hex filename
798768 661 7428 806857 c4fc9 busybox_old
798327 658 7428 806413 c4e0d busybox_unstripped
diff --git a/include/usage.h b/include/usage.h
index 76beb17..fdf96d2 100644
--- a/include/usage.h
+++ b/include/usage.h
@@ -6,6 +6,8 @@
* 2. Do not use \t in messages, use real tab character.
* 3. Start each source line with message as follows:
* |<7 spaces>"text with tabs"....
+ * or
+ * |<5 spaces>"\ntext with tabs"....
*/
#ifndef __BB_USAGE_H__
@@ -14,14 +16,14 @@
#define addgroup_trivial_usage \
"[-g GID]"USE_FEATURE_ADDUSER_TO_GROUP(" [user_name]")" group_name"
#define addgroup_full_usage \
- "Add a group to the system"USE_FEATURE_ADDUSER_TO_GROUP(" or add an user to a group") \
+ "Add a group"USE_FEATURE_ADDUSER_TO_GROUP(" or add an user to a group") \
"\n\nOptions:\n" \
" -g GID Group id"
#define adduser_trivial_usage \
"[OPTIONS] user_name"
#define adduser_full_usage \
- "Add a user to the system" \
+ "Add an user" \
"\n\nOptions:\n" \
" -h DIR Home directory\n" \
" -g GECOS GECOS field\n" \
@@ -63,17 +65,17 @@
"[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
"[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
#define arp_full_usage \
- "Manipulate the system ARP cache" \
+ "Manipulate ARP cache" \
"\n\nOptions:" \
"\n -a Display (all) hosts" \
- "\n -s Set a new ARP entry" \
+ "\n -s Set new ARP entry" \
"\n -d Delete a specified entry" \
"\n -v Verbose" \
"\n -n Don't resolve names" \
- "\n -i if Network interface (e.g. eth0)" \
+ "\n -i IF Network interface" \
"\n -D Read <hwaddr> from given device" \
- "\n -A, -p Protocol family" \
- "\n -H hwtype Hardware address type"
+ "\n -A, -p AF Protocol family" \
+ "\n -H HWTYPE Hardware address type"
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target"
@@ -96,7 +98,7 @@
"[FILE]...\n" \
"or: ash -c command [args]..."
#define ash_full_usage \
- "The ash shell (command interpreter)"
+ "The ash shell"
#define awk_trivial_usage \
"[OPTION]... [program-text] [FILE...]"
@@ -124,38 +126,38 @@
#define brctl_full_usage \
"Manage ethernet bridges." \
"\n\nCommands:\n" \
- " addbr <bridge> Create <bridge>\n" \
- " delbr <bridge> Delete <bridge>\n" \
- " addif <bridge> <iface> Add <iface> to <bridge>\n" \
- " delif <bridge> <iface> Delete <iface> from <bridge>" \
+ " addbr BRIDGE Create BRIDGE\n" \
+ " delbr BRIDGE Delete BRIDGE\n" \
+ " addif BRIDGE IFACE Add IFACE to BRIDGE\n" \
+ " delif BRIDGE IFACE Delete IFACE from BRIDGE" \
USE_FEATURE_BRCTL_FANCY("\n" \
- " setageing <bridge <time> set ageing time\n" \
- " setfd <bridge <time> set bridge forward delay\n" \
- " sethello <bridge <time> set hello time\n" \
- " setmaxage <bridge <time> set max message age\n" \
- " setpathcost <bridge <cost> set path cost\n" \
- " setportprio <bridge <prio> set port priority\n" \
- " setbridgeprio <bridge <prio> set bridge priority\n" \
- " stp <bridge> [1|0] turn stp on/off\n" \
+ " setageing BRIDGE TIME Set ageing time\n" \
+ " setfd BRIDGE TIME Set bridge forward delay\n" \
+ " sethello BRIDGE TIME Set hello time\n" \
+ " setmaxage BRIDGE TIME Set max message age\n" \
+ " setpathcost BRIDGE COST Set path cost\n" \
+ " setportprio BRIDGE PRIO Set port priority\n" \
+ " setbridgeprio BRIDGE PRIO Set bridge priority\n" \
+ " stp BRIDGE [1|0] STP on/off\n" \
)
#define bunzip2_trivial_usage \
"[OPTION]... [FILE]"
#define bunzip2_full_usage \
"Uncompress FILE (or standard input if FILE is '-' or omitted)" \
"\n\nOptions:\n" \
- " -c Write output to standard output\n" \
+ " -c Write to standard output\n" \
" -f Force"
#define bzip2_trivial_usage \
"[OPTION]... [FILE]..."
#define bzip2_full_usage \
"Compress FILE(s) with bzip2 algorithm.\n" \
- "When FILE is '-' or unspecified, reads standard input. Implies -c." \
- "\n\nOptions:" \
- "\n -c Write output to standard output instead of FILE.bz2" \
- "\n -d Decompress" \
- "\n -f Force" \
- "\n -1..-9 Compression level"
+ "When FILE is '-' or unspecified, reads standard input. Implies -c.\n" \
+ "\nOptions:" \
+ "\n -c Write to standard output" \
+ "\n -d Decompress" \
+ "\n -f Force" \
+ "\n -1..-9 Compression level"
#define busybox_notes_usage \
"Hello world!\n"
@@ -170,7 +172,7 @@
#define unlzma_full_usage \
"Uncompress FILE (or standard input if FILE is '-' or omitted)" \
"\n\nOptions:\n" \
- " -c Write output to standard output\n" \
+ " -c Write to standard output\n" \
" -f Force"
#define lzmacat_trivial_usage \
@@ -742,7 +744,7 @@
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dnsd_full_usage \
- "Small and static DNS server daemon" \
+ "Small static DNS server daemon" \
"\n\nOptions:\n" \
" -c Config filename\n" \
" -t TTL in seconds\n" \
@@ -753,12 +755,11 @@
#define dos2unix_trivial_usage \
"[option] [FILE]"
#define dos2unix_full_usage \
- "Convert FILE from dos format to unix format. When no option\n" \
- "is given, the input is converted to the opposite output format.\n" \
- "When no file is given, use stdin for input and stdout for output." \
- "\n\nOptions:\n" \
- " -u Output will be in UNIX format\n" \
- " -d Output will be in DOS format"
+ "Convert FILE from dos to unix format.\n" \
+ "When no file is given, use stdin/stdout.\n" \
+ "\nOptions:\n" \
+ "\n -u dos2unix" \
+ "\n -d unix2dos"
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
@@ -795,19 +796,19 @@
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
" bytes." \
"\n\nOptions:\n" \
- " -a Show sizes of files in addition to directories\n" \
- " -H Follow symlinks that are FILE command line args\n" \
- " -L Follow all symlinks encountered\n" \
+ " -a Show file sizes too\n" \
+ " -H Follow symlinks on command line\n" \
+ " -L Follow all symlinks\n" \
" -d N Limit output to directories (and files with -a) of depth < N\n" \
- " -c Output a grand total\n" \
+ " -c Show grand total\n" \
" -l Count sizes many times if hard linked\n" \
" -s Display only a total for each argument\n" \
" -x Skip directories on different filesystems\n" \
USE_FEATURE_HUMAN_READABLE( \
- " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
- " -m Print sizes in megabytes\n" \
+ " -h Sizes in human readable format (e.g., 1K 243M 2G )\n" \
+ " -m Sizes in megabytes\n" \
) \
- " -k Print sizes in kilobytes" \
+ " -k Sizes in kilobytes" \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)")
#define du_example_usage \
"$ du\n" \
@@ -1012,19 +1013,27 @@
"\n\nOptions:\n" \
" -n Don't verify after format"
+/* Looks like someone forgot to add this to config system */
+#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
+# define ENABLE_FEATURE_FDISK_BLKSIZE 0
+# define USE_FEATURE_FDISK_BLKSIZE(a)
+#endif
+
#define fdisk_trivial_usage \
- "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
+ "[-ul" USE_FEATURE_FDISK_BLKSIZE("s") "] " \
+ "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage \
- "Change partition table" \
- "\n\nOptions:\n" \
- " -l List partition table(s)\n" \
- " -u Give Start and End in sector (instead of cylinder) units\n" \
- " -s PARTITION Give partition size(s) in blocks\n" \
- " -b 2048 (for certain MO disks) use 2048-byte sectors\n" \
- " -C CYLINDERS Set the number of cylinders\n" \
- " -H HEADS Set the number of heads\n" \
- " -S SECTORS Set the number of sectors\n" \
- " -v Give fdisk version"
+ "Change partition table\n" \
+ "\nOptions:\n" \
+ "\n -u Start and End are in sectors (instead of cylinders)" \
+ "\n -l Show partition table for each DISK, then exit" \
+ USE_FEATURE_FDISK_BLKSIZE( \
+ "\n -s Show partition sizes in kb for each DISK, then exit" \
+ ) \
+ "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
+ "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
+ "\n -H HEADS\n" \
+ "\n -S SECTORS" \
#define fetchmail_trivial_usage \
"[-w timeout] [-U user] -P password [-X] [-t] [-z] server[:port] maildir [prog]"
@@ -1032,25 +1041,25 @@
"Fetch content of remote mailbox to local Maildir." \
"\n\nOptions:\n" \
" -w timeout Set timeout on network operations\n" \
- " -U username Authenticate with specified username\n" \
- " -P password Authenticate with specified password\n" \
+ " -U username Authenticate with specified username/password\n" \
+ " -P password\n" \
" -X Use openssl connection helper for secured servers\n" \
" -t Get only headers\n" \
" -z Delete messages on server\n" \
- " prog Run prog <message file> on message delivery"
+ " prog Run prog <message_file> on message delivery"
#define findfs_trivial_usage \
"LABEL=label or UUID=uuid"
#define findfs_full_usage \
- "Finds a filesystem device based on a label or UUID."
+ "Find a filesystem device based on a label or UUID."
#define findfs_example_usage \
"$ findfs LABEL=MyDevice"
#define find_trivial_usage \
"[PATH...] [EXPRESSION]"
#define find_full_usage \
- "Search for files in a directory hierarchy. The default PATH is\n" \
- "the current directory, default EXPRESSION is '-print'\n" \
+ "Search for files. The default PATH is the current directory,\n" \
+ "default EXPRESSION is '-print'\n" \
"\nEXPRESSION may consist of:" \
"\n -follow Dereference symlinks" \
USE_FEATURE_FIND_XDEV( \
@@ -1202,15 +1211,15 @@
)
#define fuser_trivial_usage \
- "[options] file OR port/proto"
+ "[options] FILE or PORT/PROTO"
#define fuser_full_usage \
"Options:\n" \
" -m Show all processes on the same mounted fs\n" \
- " -k Kill all processes that match\n" \
" -s Don't print or kill anything\n" \
- " -4 When using port/proto only search IPv4 space\n" \
- " -6 When using port/proto only search IPv6 space\n" \
- " -SIGNAL When used with -k, this signal will be used to kill"
+ " -4 Search only IPv4 space\n" \
+ " -6 Search only IPv6 space\n" \
+ " -k Kill all processes that match\n" \
+ " -SIGNAL Signal to send (default: TERM)"
#define getenforce_trivial_usage
#define getenforce_full_usage
@@ -1274,7 +1283,7 @@
"\n\nOptions:\n" \
" -h Enable hardware (RTS/CTS) flow control\n" \
" -i Do not display /etc/issue before running login\n" \
- " -L Local line, so do not do carrier detect\n" \
+ " -L Local line, do not do carrier detect\n" \
" -m Get baud rate from modem's CONNECT status message\n" \
" -w Wait for a CR or LF before sending /etc/issue\n" \
" -n Do not prompt the user for a login name\n" \
@@ -1330,9 +1339,9 @@
#define gunzip_full_usage \
"Uncompress FILE (or standard input if FILE is '-')" \
"\n\nOptions:\n" \
- " -c Write output to standard output\n" \
+ " -c Write to standard output\n" \
" -f Force\n" \
- " -t Test compressed file integrity"
+ " -t Test file integrity"
#define gunzip_example_usage \
"$ ls -la /tmp/BusyBox*\n" \
"-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
@@ -1346,7 +1355,7 @@
"Compress FILE(s) with maximum compression.\n" \
"When FILE is '-' or unspecified, reads standard input. Implies -c." \
"\n\nOptions:\n" \
- " -c Write output to standard output instead of FILE.gz\n" \
+ " -c Write to standard output\n" \
" -d Decompress\n" \
" -f Force"
#define gzip_example_usage \
@@ -1521,12 +1530,12 @@
#define hwclock_full_usage \
"Query and set a hardware clock (RTC)" \
"\n\nOptions:\n" \
- " -r Read hardware clock and print result\n" \
- " -s Set the system time from the hardware clock\n" \
- " -w Set the hardware clock to the system time\n" \
- " -u The hardware clock is kept in coordinated universal time\n" \
- " -l The hardware clock is kept in local time\n" \
- " -f FILE Use the specified clock (e.g. /dev/rtc2)"
+ " -r Show time from hardware clock\n" \
+ " -s Set system time from hardware clock\n" \
+ " -w Set hardware clock to system time\n" \
+ " -u Hardware clock is in UTC\n" \
+ " -l Hardware clock is in local time\n" \
+ " -f FILE Use specified device (e.g. /dev/rtc2)"
#define id_trivial_usage \
"[OPTIONS]... [USERNAME]"
@@ -1974,17 +1983,16 @@
"5\n"
#define less_trivial_usage \
- "[-EMNmh~?] FILE1 FILE2..."
+ "[-EMNmh~?] [FILE...]"
#define less_full_usage \
"View a file or list of files. The position within files can be\n" \
"changed, and files can be manipulated in various ways." \
"\n\nOptions:\n" \
" -E Quit once the end of a file is reached\n" \
- " -M,-m Display a status line containing the current line numbers\n" \
- " and the percentage through the file\n" \
+ " -M,-m Display a status line containing the line numbers\n" \
+ " and percentage through the file\n" \
" -N Prefix line numbers to each line\n" \
- " -~ Suppress ~s displayed when input past the end of the file is\n" \
- " reached"
+ " -~ Suppress ~s displayed past the end of the file" \
#define setarch_trivial_usage \
"personality program [args...]"
@@ -2034,18 +2042,18 @@
"\n\nOptions:\n" \
" -s Log to stderr as well as the system log\n" \
" -t TAG Log using the specified tag (defaults to user name)\n" \
- " -p PRIO Enter the message with the specified priority.\n" \
- " This may be numerical or a 'facility.level' pair."
+ " -p PRIO Priority (numeric or facility.level pair)"
+
#define logger_example_usage \
"$ logger \"hello\"\n"
#define login_trivial_usage \
- "[OPTION]... [username] [ENV=VAR...]"
+ "[-p] [-h HOST] [[-f] USER]"
#define login_full_usage \
"Begin a new session on the system" \
"\n\nOptions:\n" \
" -f Do not authenticate (user already authenticated)\n" \
- " -h Name of the remote host for this login\n" \
+ " -h Name of the remote host\n" \
" -p Preserve environment"
#define logname_trivial_usage \
@@ -2059,9 +2067,9 @@
#define logread_trivial_usage \
"[OPTION]..."
#define logread_full_usage \
- "Show the messages from syslogd (using circular buffer)" \
+ "Show messages in syslogd's circular buffer" \
"\n\nOptions:\n" \
- " -f Output data as the log grows"
+ " -f Output data as log grows"
#define losetup_trivial_usage \
"[-o OFS] LOOPDEV FILE - associate loop devices\n" \
@@ -2384,7 +2392,7 @@
" -n [14|30] Maximum length of filenames\n" \
" -i INODES Number of inodes for the filesystem\n" \
" -l FILENAME Read bad blocks list from FILENAME\n" \
- " -v Make a Minix version 2 filesystem"
+ " -v Make version 2 filesystem"
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
@@ -2809,30 +2817,28 @@
"\n\nOptions:\n" \
" -l Show command name too\n" \
" -f Match against entire command line\n" \
- " -n Signal the newest process only\n" \
- " -o Signal the oldest process only\n" \
+ " -n Show the newest process only\n" \
+ " -o Show the oldest process only\n" \
" -v Negate the matching\n" \
" -x Match whole name (not substring)"
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
-#define USAGE_PIDOF "Options:"
-#else
-#define USAGE_PIDOF "\nThis version of pidof accepts no options."
-#endif
-
#define pidof_trivial_usage \
- "process-name [OPTION] [process-name...]"
-
+ "[OPTION] [NAME...]"
+#define USAGE_PIDOF "\n\nOptions:"
+#else
+#define pidof_trivial_usage \
+ "[NAME...]"
+#define USAGE_PIDOF /* none */
+#endif
#define pidof_full_usage \
- "List the PIDs of all processes with names that match the\n" \
- "names on the command line\n" \
+ "List PIDs of all processes with names that match NAMEs" \
USAGE_PIDOF \
USE_FEATURE_PIDOF_SINGLE( \
- "\n -s Display only a single PID") \
+ "\n -s Show only one PID") \
USE_FEATURE_PIDOF_OMIT( \
- "\n -o PID Omit given pid") \
- USE_FEATURE_PIDOF_OMIT( \
- "\n Use %PPID to omit the parent pid of pidof itself")
+ "\n -o PID Omit given pid" \
+ "\n Use %PPID to omit pid of pidof's parent")
#define pidof_example_usage \
"$ pidof init\n" \
"1\n" \
@@ -3090,12 +3096,12 @@
#define rm_trivial_usage \
"[OPTION]... FILE..."
#define rm_full_usage \
- "Remove (unlink) the FILE(s). You may use '--' to\n" \
+ "Remove (unlink) the FILE(s). Use '--' to\n" \
"indicate that all following arguments are non-options." \
"\n\nOptions:\n" \
- " -i Always prompt before removing each destination\n" \
- " -f Remove existing destinations, never prompt\n" \
- " -r,-R Remove the contents of directories recursively"
+ " -i Always prompt before removing\n" \
+ " -f Never prompt\n" \
+ " -r,-R Remove directories recursively"
#define rm_example_usage \
"$ rm -rf /tmp/foo\n"
@@ -3189,12 +3195,14 @@
#define run_parts_trivial_usage \
"[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
- "Run a bunch of scripts in a directory" \
- "\n\nOptions:\n" \
- " -t Prints what would be run, but does not actually run anything\n" \
- " -a ARG Pass ARG as an argument for every program invoked\n" \
- " -u MASK Set the umask to MASK before executing every program" \
-USE_FEATURE_RUN_PARTS_FANCY("\n -l Prints names of all matching files even when they are not executable")
+ "Run a bunch of scripts in a directory\n" \
+ "\nOptions:" \
+ "\n -t Print what would be run, but don't actually run anything" \
+ "\n -a ARG Pass ARG as argument for every program" \
+ "\n -u MASK Set the umask to MASK before running every program" \
+ USE_FEATURE_RUN_PARTS_FANCY( \
+ "\n -l Print names of all matching files even if they are not executable" \
+ )
#define run_parts_example_usage \
"$ run-parts -a start /etc/init.d\n" \
@@ -3251,7 +3259,7 @@
#define sed_full_usage \
"Options:\n" \
" -e script Add the script to the commands to be executed\n" \
- " -f scriptfile Add script-file contents to the\n" \
+ " -f scriptfile Add scriptfile contents to the\n" \
" commands to be executed\n" \
" -i Edit files in-place\n" \
" -n Suppress automatic printing of pattern space\n" \
@@ -3276,9 +3284,9 @@
"Send an email with optional attachments." \
"\n\nOptions:\n" \
" -w timeout Set timeout on network operations\n" \
- " -U username Authenticate with specified username\n" \
- " -P password Authenticate with specified password\n" \
- " -t address Recipient(s). May be multiple\n" \
+ " -U username Authenticate with specified username/password\n" \
+ " -P password\n" \
+ " -t address Recipient(s). May be repeated\n" \
" -X Use openssl connection helper for secured servers\n" \
" -n Request delivery notification to sender\n" \
" -s subject Subject\n" \
@@ -3813,19 +3821,15 @@
#define telnet_trivial_usage \
"[-a] [-l USER] HOST [PORT]"
#define telnet_full_usage \
- "Connect to remote telnet server" \
- "\n\nOptions:\n" \
- " -a Attempt an automatic login with the USER variable\n" \
- " -l USER Attempt an automatic login with the USER argument\n" \
- " HOST The official name, alias or the IP address of the\n" \
- " remote host\n" \
- " PORT The remote port number to connect to. If it is not\n" \
- " specified, the default telnet (23) port is used."
+ "Connect to telnet server\n" \
+ "\nOptions:" \
+ "\n -a Attempt an automatic login with USER variable" \
+ "\n -l USER Attempt an automatic login with USER argument"
#else
#define telnet_trivial_usage \
"HOST [PORT]"
#define telnet_full_usage \
- "Connect to remote telnet server"
+ "Connect to telnet server"
#endif
#define telnetd_trivial_usage \
@@ -3869,9 +3873,8 @@
/* with not-implemented options: */
/* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [-t sec] ip port prog..." */
#define tcpsvd_full_usage \
- "Creates TCP socket, binds it to ip:port and listens on it\n" \
- "for incoming connections. For each connection it runs prog." \
- "\n" \
+ "Create TCP socket, bind it to ip:port and listen\n" \
+ "for incoming connection. Run PROG for each connection.\n" \
"\nip IP to listen on. '0' = all" \
"\nport Port to listen on" \
"\nprog [arg] Program to run" \
@@ -3889,10 +3892,9 @@
#define udpsvd_trivial_usage \
"[-hEv] [-c n] [-u user] [-l name] ip port prog"
#define udpsvd_full_usage \
- "Creates UDP socket, binds it to ip:port and listens on it\n" \
- "for incoming packets. For each packet it runs prog\n" \
- "(redirecting all further packets with same peer ip:port to it)." \
- "\n" \
+ "Create UDP socket, bind it to ip:port and wait\n" \
+ "for incoming packets. Run PROG for each packet,\n" \
+ "redirecting all further packets with same peer ip:port to it\n" \
"\nip IP to listen on. '0' = all" \
"\nport Port to listen on" \
"\nprog [arg] Program to run" \
@@ -3928,10 +3930,10 @@
" -v Verbose"
#define top_trivial_usage \
- "[-b] [-n count] [-d seconds]"
+ "[-b] [-n COUNT] [-d SECONDS]"
#define top_full_usage \
"Provide a view of process activity in real time.\n" \
- "Read the status of all processes from /proc each <seconds>\n" \
+ "Read the status of all processes from /proc each SECONDS\n" \
"and show the status for however many processes will fit on the screen."
#define touch_trivial_usage \
@@ -4164,12 +4166,11 @@
#define unix2dos_trivial_usage \
"[option] [FILE]"
#define unix2dos_full_usage \
- "Convert FILE from unix format to dos format. When no option\n" \
- "is given, the input is converted to the opposite output format.\n" \
- "When no file is given, use stdin/stdout." \
- "\n\nOptions:\n" \
- " -u Output will be in UNIX format\n" \
- " -d Output will be in DOS format"
+ "Convert FILE from unix to dos format.\n" \
+ "When no file is given, use stdin/stdout.\n" \
+ "\nOptions:\n" \
+ "\n -u dos2unix" \
+ "\n -d unix2dos"
#define unzip_trivial_usage \
"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"