| /* vi: set sw=4 ts=4: */ |
| /* |
| * ether-wake.c - Send a magic packet to wake up sleeping machines. |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this tarball for details. |
| * |
| * Author: Donald Becker, http://www.scyld.com/"; http://www.scyld.com/wakeonlan.html |
| * Busybox port: Christian Volkmann <haveaniceday@online.de> |
| * Used version of ether-wake.c: v1.09 11/12/2003 Donald Becker, http://www.scyld.com/"; |
| */ |
| |
| /* full usage according Donald Becker |
| * usage: ether-wake [-i <ifname>] [-p aa:bb:cc:dd[:ee:ff]] 00:11:22:33:44:55\n" |
| * |
| * This program generates and transmits a Wake-On-LAN (WOL)\n" |
| * \"Magic Packet\", used for restarting machines that have been\n" |
| * soft-powered-down (ACPI D3-warm state).\n" |
| * It currently generates the standard AMD Magic Packet format, with\n" |
| * an optional password appended.\n" |
| * |
| * The single required parameter is the Ethernet MAC (station) address\n" |
| * of the machine to wake or a host ID with known NSS 'ethers' entry.\n" |
| * The MAC address may be found with the 'arp' program while the target\n" |
| * machine is awake.\n" |
| * |
| * Options:\n" |
| * -b Send wake-up packet to the broadcast address.\n" |
| * -D Increase the debug level.\n" |
| * -i ifname Use interface IFNAME instead of the default 'eth0'.\n" |
| * -p <pw> Append the four or six byte password PW to the packet.\n" |
| * A password is only required for a few adapter types.\n" |
| * The password may be specified in ethernet hex format\n" |
| * or dotted decimal (Internet address)\n" |
| * -p 00:22:44:66:88:aa\n" |
| * -p 192.168.1.1\n"; |
| * |
| * |
| * This program generates and transmits a Wake-On-LAN (WOL) "Magic Packet", |
| * used for restarting machines that have been soft-powered-down |
| * (ACPI D3-warm state). It currently generates the standard AMD Magic Packet |
| * format, with an optional password appended. |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU Public License, incorporated herein by reference. |
| * Contact the author for use under other terms. |
| * |
| * This source file was originally part of the network tricks package, and |
| * is now distributed to support the Scyld Beowulf system. |
| * Copyright 1999-2003 Donald Becker and Scyld Computing Corporation. |
| * |
| * The author may be reached as becker@scyld, or C/O |
| * Scyld Computing Corporation |
| * 914 Bay Ridge Road, Suite 220 |
| * Annapolis MD 21403 |
| * |
| * Notes: |
| * On some systems dropping root capability allows the process to be |
| * dumped, traced or debugged. |
| * If someone traces this program, they get control of a raw socket. |
| * Linux handles this safely, but beware when porting this program. |
| * |
| * An alternative to needing 'root' is using a UDP broadcast socket, however |
| * doing so only works with adapters configured for unicast+broadcast Rx |
| * filter. That configuration consumes more power. |
| */ |
| |
| |
| #include <netpacket/packet.h> |
| #include <net/ethernet.h> |
| #include <netinet/ether.h> |
| #include <linux/if.h> |
| |
| #include "busybox.h" |
| |
| /* Note: PF_INET, SOCK_DGRAM, IPPROTO_UDP would allow SIOCGIFHWADDR to |
| * work as non-root, but we need SOCK_PACKET to specify the Ethernet |
| * destination address. |
| */ |
| #ifdef PF_PACKET |
| # define whereto_t sockaddr_ll |
| # define make_socket() xsocket(PF_PACKET, SOCK_RAW, 0) |
| #else |
| # define whereto_t sockaddr |
| # define make_socket() xsocket(AF_INET, SOCK_PACKET, SOCK_PACKET) |
| #endif |
| |
| #ifdef DEBUG |
| # define bb_debug_msg(fmt, args...) fprintf(stderr, fmt, ## args) |
| void bb_debug_dump_packet(unsigned char *outpack, int pktsize) |
| { |
| int i; |
| printf("packet dump:\n"); |
| for (i = 0; i < pktsize; ++i) { |
| printf("%2.2x ", outpack[i]); |
| if (i % 20 == 19) printf("\n"); |
| } |
| printf("\n\n"); |
| } |
| #else |
| # define bb_debug_msg(fmt, args...) |
| # define bb_debug_dump_packet(outpack, pktsize) |
| #endif |
| |
| static inline void get_dest_addr(const char *arg, struct ether_addr *eaddr); |
| static inline int get_fill(unsigned char *pkt, struct ether_addr *eaddr, int broadcast); |
| static inline int get_wol_pw(const char *ethoptarg, unsigned char *wol_passwd); |
| |
| int etherwake_main(int argc, char *argv[]) |
| { |
| char *ifname = "eth0", *pass = NULL; |
| unsigned long flags; |
| unsigned char wol_passwd[6]; |
| int wol_passwd_sz = 0; |
| |
| int s; /* Raw socket */ |
| int pktsize; |
| unsigned char outpack[1000]; |
| |
| struct ether_addr eaddr; |
| struct whereto_t whereto; /* who to wake up */ |
| |
| /* handle misc user options */ |
| flags = bb_getopt_ulflags(argc, argv, "bi:p:", &ifname, &pass); |
| if (optind == argc) |
| bb_show_usage(); |
| if (pass) |
| wol_passwd_sz = get_wol_pw(pass, wol_passwd); |
| |
| /* create the raw socket */ |
| s = make_socket(); |
| |
| /* now that we have a raw socket we can drop root */ |
| xsetuid(getuid()); |
| |
| /* look up the dest mac address */ |
| get_dest_addr(argv[optind], &eaddr); |
| |
| /* fill out the header of the packet */ |
| pktsize = get_fill(outpack, &eaddr, flags /*& 1 [OPT_BROADCAST]*/); |
| |
| bb_debug_dump_packet(outpack, pktsize); |
| |
| /* Fill in the source address, if possible. */ |
| #ifdef __linux__ |
| { |
| struct ifreq if_hwaddr; |
| |
| strcpy(if_hwaddr.ifr_name, ifname); |
| if (ioctl(s, SIOCGIFHWADDR, &if_hwaddr) < 0) |
| bb_perror_msg_and_die("SIOCGIFHWADDR on %s failed", ifname); |
| |
| memcpy(outpack+6, if_hwaddr.ifr_hwaddr.sa_data, 6); |
| |
| # ifdef DEBUG |
| { |
| unsigned char *hwaddr = if_hwaddr.ifr_hwaddr.sa_data; |
| printf("The hardware address (SIOCGIFHWADDR) of %s is type %d " |
| "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n\n", ifname, |
| if_hwaddr.ifr_hwaddr.sa_family, hwaddr[0], hwaddr[1], |
| hwaddr[2], hwaddr[3], hwaddr[4], hwaddr[5]); |
| } |
| # endif |
| } |
| #endif /* __linux__ */ |
| |
| bb_debug_dump_packet(outpack, pktsize); |
| |
| /* append the password if specified */ |
| if (wol_passwd_sz > 0) { |
| memcpy(outpack+pktsize, wol_passwd, wol_passwd_sz); |
| pktsize += wol_passwd_sz; |
| } |
| |
| bb_debug_dump_packet(outpack, pktsize); |
| |
| /* This is necessary for broadcasts to work */ |
| if (flags /*& 1 [OPT_BROADCAST]*/) { |
| int one = 1; |
| if (setsockopt(s, SOL_SOCKET, SO_BROADCAST, (void *)&one, sizeof(one)) < 0) |
| bb_perror_msg("SO_BROADCAST"); |
| } |
| |
| #if defined(PF_PACKET) |
| { |
| struct ifreq ifr; |
| strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); |
| if (ioctl(s, SIOCGIFINDEX, &ifr) == -1) |
| bb_perror_msg_and_die("SIOCGIFINDEX"); |
| memset(&whereto, 0, sizeof(whereto)); |
| whereto.sll_family = AF_PACKET; |
| whereto.sll_ifindex = ifr.ifr_ifindex; |
| /* The manual page incorrectly claims the address must be filled. |
| We do so because the code may change to match the docs. */ |
| whereto.sll_halen = ETH_ALEN; |
| memcpy(whereto.sll_addr, outpack, ETH_ALEN); |
| } |
| #else |
| whereto.sa_family = 0; |
| strcpy(whereto.sa_data, ifname); |
| #endif |
| |
| if (sendto(s, outpack, pktsize, 0, (struct sockaddr *)&whereto, sizeof(whereto)) < 0) |
| bb_perror_msg(bb_msg_write_error); |
| |
| close(s); |
| |
| return EXIT_SUCCESS; |
| } |
| |
| /* Convert the host ID string to a MAC address. |
| * The string may be a: |
| * Host name |
| * IP address string |
| * MAC address string |
| */ |
| static inline void get_dest_addr(const char *hostid, struct ether_addr *eaddr) |
| { |
| struct ether_addr *eap; |
| |
| eap = ether_aton(hostid); |
| if (eap) { |
| *eaddr = *eap; |
| bb_debug_msg("The target station address is %s\n\n", ether_ntoa(eaddr)); |
| #if !defined(__UCLIBC__) |
| } else if (ether_hostton(hostid, eaddr) == 0) { |
| bb_debug_msg("Station address for hostname %s is %s\n\n", hostid, ether_ntoa(eaddr)); |
| #else |
| # warning Need to implement ether_hostton() for uClibc |
| #endif |
| } else |
| bb_show_usage(); |
| } |
| |
| static inline int get_fill(unsigned char *pkt, struct ether_addr *eaddr, int broadcast) |
| { |
| int offset, i; |
| unsigned char *station_addr = eaddr->ether_addr_octet; |
| |
| if (broadcast) |
| memset(pkt+0, 0xff, 6); |
| else |
| memcpy(pkt, station_addr, 6); |
| memcpy(pkt+6, station_addr, 6); |
| pkt[12] = 0x08; /* Or 0x0806 for ARP, 0x8035 for RARP */ |
| pkt[13] = 0x42; |
| offset = 14; |
| |
| memset(pkt+offset, 0xff, 6); |
| offset += 6; |
| |
| for (i = 0; i < 16; ++i) { |
| memcpy(pkt+offset, station_addr, 6); |
| offset += 6; |
| } |
| |
| return offset; |
| } |
| |
| static inline int get_wol_pw(const char *ethoptarg, unsigned char *wol_passwd) |
| { |
| int passwd[6]; |
| int byte_cnt, i; |
| |
| /* handle MAC format */ |
| byte_cnt = sscanf(ethoptarg, "%2x:%2x:%2x:%2x:%2x:%2x", |
| &passwd[0], &passwd[1], &passwd[2], |
| &passwd[3], &passwd[4], &passwd[5]); |
| /* handle IP format */ |
| if (byte_cnt < 4) |
| byte_cnt = sscanf(ethoptarg, "%d.%d.%d.%d", |
| &passwd[0], &passwd[1], &passwd[2], &passwd[3]); |
| if (byte_cnt < 4) { |
| bb_error_msg("Unable to read the Wake-On-LAN pass"); |
| return 0; |
| } |
| |
| for (i = 0; i < byte_cnt; ++i) |
| wol_passwd[i] = passwd[i]; |
| |
| bb_debug_msg("password: %2.2x %2.2x %2.2x %2.2x (%d)\n\n", |
| wol_passwd[0], wol_passwd[1], wol_passwd[2], wol_passwd[3], |
| byte_cnt); |
| |
| return byte_cnt; |
| } |