| /* vi: set sw=4 ts=4: */ |
| /* |
| * Mini mount implementation for busybox |
| * |
| * Copyright (C) 1995, 1996 by Bruce Perens <bruce@pixar.com>. |
| * Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org> |
| * Copyright (C) 2005-2006 by Rob Landley <rob@landley.net> |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this tarball for details. |
| */ |
| |
| /* todo: |
| * bb_getopt_ulflags(); |
| */ |
| |
| /* Design notes: There is no spec for mount. Remind me to write one. |
| |
| mount_main() calls singlemount() which calls mount_it_now(). |
| |
| mount_main() can loop through /etc/fstab for mount -a |
| singlemount() can loop through /etc/filesystems for fstype detection. |
| mount_it_now() does the actual mount. |
| */ |
| |
| #include "busybox.h" |
| #include <mntent.h> |
| |
| // These two aren't always defined in old headers |
| #ifndef MS_BIND |
| #define MS_BIND 4096 |
| #endif |
| #ifndef MS_MOVE |
| #define MS_MOVE 8192 |
| #endif |
| #ifndef MS_SILENT |
| #define MS_SILENT 32768 |
| #endif |
| |
| // Not real flags, but we want to be able to check for this. |
| #define MOUNT_NOAUTO (1<<29) |
| #define MOUNT_SWAP (1<<30) |
| /* Standard mount options (from -o options or --options), with corresponding |
| * flags */ |
| |
| struct { |
| const char *name; |
| long flags; |
| } static const mount_options[] = { |
| // NOP flags. |
| |
| {"loop", 0}, |
| {"defaults", 0}, |
| {"quiet", 0}, |
| |
| // vfs flags |
| |
| {"ro", MS_RDONLY}, |
| {"rw", ~MS_RDONLY}, |
| {"nosuid", MS_NOSUID}, |
| {"suid", ~MS_NOSUID}, |
| {"dev", ~MS_NODEV}, |
| {"nodev", MS_NODEV}, |
| {"exec", ~MS_NOEXEC}, |
| {"noexec", MS_NOEXEC}, |
| {"sync", MS_SYNCHRONOUS}, |
| {"async", ~MS_SYNCHRONOUS}, |
| {"atime", ~MS_NOATIME}, |
| {"noatime", MS_NOATIME}, |
| {"diratime", ~MS_NODIRATIME}, |
| {"nodiratime", MS_NODIRATIME}, |
| {"loud", ~MS_SILENT}, |
| |
| // action flags |
| |
| {"remount", MS_REMOUNT}, |
| {"bind", MS_BIND}, |
| {"move", MS_MOVE}, |
| {"noauto",MOUNT_NOAUTO}, |
| {"swap",MOUNT_SWAP} |
| }; |
| |
| /* Append mount options to string */ |
| static void append_mount_options(char **oldopts, char *newopts) |
| { |
| if(*oldopts && **oldopts) { |
| char *temp=xasprintf("%s,%s",*oldopts,newopts); |
| free(*oldopts); |
| *oldopts=temp; |
| } else { |
| if (ENABLE_FEATURE_CLEAN_UP) free(*oldopts); |
| *oldopts = xstrdup(newopts); |
| } |
| } |
| |
| /* Use the mount_options list to parse options into flags. |
| * Return list of unrecognized options in *strflags if strflags!=NULL */ |
| static int parse_mount_options(char *options, char **unrecognized) |
| { |
| int flags = MS_SILENT; |
| |
| // Loop through options |
| for (;;) { |
| int i; |
| char *comma = strchr(options, ','); |
| |
| if (comma) *comma = 0; |
| |
| // Find this option in mount_options |
| for (i = 0; i < (sizeof(mount_options) / sizeof(*mount_options)); i++) { |
| if (!strcasecmp(mount_options[i].name, options)) { |
| long fl = mount_options[i].flags; |
| if(fl < 0) flags &= fl; |
| else flags |= fl; |
| break; |
| } |
| } |
| // If unrecognized not NULL, append unrecognized mount options */ |
| if (unrecognized |
| && i == (sizeof(mount_options) / sizeof(*mount_options))) |
| { |
| // Add it to strflags, to pass on to kernel |
| i = *unrecognized ? strlen(*unrecognized) : 0; |
| *unrecognized = xrealloc(*unrecognized, i+strlen(options)+2); |
| |
| // Comma separated if it's not the first one |
| if (i) (*unrecognized)[i++] = ','; |
| strcpy((*unrecognized)+i, options); |
| } |
| |
| // Advance to next option, or finish |
| if(comma) { |
| *comma = ','; |
| options = ++comma; |
| } else break; |
| } |
| |
| return flags; |
| } |
| |
| // Return a list of all block device backed filesystems |
| |
| static llist_t *get_block_backed_filesystems(void) |
| { |
| char *fs, *buf, |
| *filesystems[] = {"/etc/filesystems", "/proc/filesystems", 0}; |
| llist_t *list = 0; |
| int i; |
| FILE *f; |
| |
| for(i = 0; filesystems[i]; i++) { |
| if(!(f = fopen(filesystems[i], "r"))) continue; |
| |
| for(fs = buf = 0; (fs = buf = bb_get_chomped_line_from_file(f)); |
| free(buf)) |
| { |
| if(!strncmp(buf,"nodev",5) && isspace(buf[5])) continue; |
| |
| while(isspace(*fs)) fs++; |
| if(*fs=='#' || *fs=='*') continue; |
| if(!*fs) continue; |
| |
| llist_add_to_end(&list,xstrdup(fs)); |
| } |
| if (ENABLE_FEATURE_CLEAN_UP) fclose(f); |
| } |
| |
| return list; |
| } |
| |
| llist_t *fslist = 0; |
| |
| #if ENABLE_FEATURE_CLEAN_UP |
| static void delete_block_backed_filesystems(void) |
| { |
| llist_free(fslist, free); |
| } |
| #else |
| void delete_block_backed_filesystems(void); |
| #endif |
| |
| #if ENABLE_FEATURE_MTAB_SUPPORT |
| static int useMtab; |
| static int fakeIt; |
| #else |
| #define useMtab 0 |
| #define fakeIt 0 |
| #endif |
| |
| // Perform actual mount of specific filesystem at specific location. |
| |
| static int mount_it_now(struct mntent *mp, int vfsflags, char *filteropts) |
| { |
| int rc; |
| |
| if (fakeIt) { return 0; } |
| |
| // Mount, with fallback to read-only if necessary. |
| |
| for(;;) { |
| rc = mount(mp->mnt_fsname, mp->mnt_dir, mp->mnt_type, |
| vfsflags, filteropts); |
| if(!rc || (vfsflags&MS_RDONLY) || (errno!=EACCES && errno!=EROFS)) |
| break; |
| bb_error_msg("%s is write-protected, mounting read-only", |
| mp->mnt_fsname); |
| vfsflags |= MS_RDONLY; |
| } |
| |
| // Abort entirely if permission denied. |
| |
| if (rc && errno == EPERM) |
| bb_error_msg_and_die(bb_msg_perm_denied_are_you_root); |
| |
| /* If the mount was successful, and we're maintaining an old-style |
| * mtab file by hand, add the new entry to it now. */ |
| |
| if(ENABLE_FEATURE_MTAB_SUPPORT && useMtab && !rc) { |
| FILE *mountTable = setmntent(bb_path_mtab_file, "a+"); |
| int i; |
| |
| if(!mountTable) |
| bb_error_msg("No %s\n",bb_path_mtab_file); |
| |
| // Add vfs string flags |
| |
| for(i=0; mount_options[i].flags != MS_REMOUNT; i++) |
| if (mount_options[i].flags > 0) |
| append_mount_options(&(mp->mnt_opts), |
| // Shut up about the darn const. It's not important. I don't care. |
| (char *)mount_options[i].name); |
| |
| // Remove trailing / (if any) from directory we mounted on |
| |
| i = strlen(mp->mnt_dir); |
| if(i>1 && mp->mnt_dir[i-1] == '/') mp->mnt_dir[i-1] = 0; |
| |
| // Write and close. |
| |
| if(!mp->mnt_type || !*mp->mnt_type) mp->mnt_type="--bind"; |
| addmntent(mountTable, mp); |
| endmntent(mountTable); |
| if (ENABLE_FEATURE_CLEAN_UP) |
| if(strcmp(mp->mnt_type,"--bind")) mp->mnt_type = 0; |
| } |
| |
| return rc; |
| } |
| |
| |
| // Mount one directory. Handles NFS, loopback, autobind, and filesystem type |
| // detection. Returns 0 for success, nonzero for failure. |
| |
| static int singlemount(struct mntent *mp, int ignore_busy) |
| { |
| int rc = -1, vfsflags; |
| char *loopFile = 0, *filteropts = 0; |
| llist_t *fl = 0; |
| struct stat st; |
| |
| vfsflags = parse_mount_options(mp->mnt_opts, &filteropts); |
| |
| // Treat fstype "auto" as unspecified. |
| |
| if (mp->mnt_type && !strcmp(mp->mnt_type,"auto")) mp->mnt_type = 0; |
| |
| // Might this be an NFS filesystem? |
| |
| if (ENABLE_FEATURE_MOUNT_NFS && |
| (!mp->mnt_type || !strcmp(mp->mnt_type,"nfs")) && |
| strchr(mp->mnt_fsname, ':') != NULL) |
| { |
| if (nfsmount(mp->mnt_fsname, mp->mnt_dir, &vfsflags, &filteropts, 1)) { |
| bb_perror_msg("nfsmount failed"); |
| goto report_error; |
| } else { |
| // Strangely enough, nfsmount() doesn't actually mount() anything. |
| mp->mnt_type = "nfs"; |
| rc = mount_it_now(mp, vfsflags, filteropts); |
| if (ENABLE_FEATURE_CLEAN_UP) free(filteropts); |
| |
| goto report_error; |
| } |
| } |
| |
| // Look at the file. (Not found isn't a failure for remount, or for |
| // a synthetic filesystem like proc or sysfs.) |
| |
| if (lstat(mp->mnt_fsname, &st)); |
| else if (!(vfsflags & (MS_REMOUNT | MS_BIND | MS_MOVE))) { |
| // Do we need to allocate a loopback device for it? |
| |
| if (ENABLE_FEATURE_MOUNT_LOOP && S_ISREG(st.st_mode)) { |
| loopFile = bb_simplify_path(mp->mnt_fsname); |
| mp->mnt_fsname = 0; |
| switch(set_loop(&(mp->mnt_fsname), loopFile, 0)) { |
| case 0: |
| case 1: |
| break; |
| default: |
| bb_error_msg( errno == EPERM || errno == EACCES |
| ? bb_msg_perm_denied_are_you_root |
| : "Couldn't setup loop device"); |
| return errno; |
| } |
| |
| // Autodetect bind mounts |
| |
| } else if (S_ISDIR(st.st_mode) && !mp->mnt_type) vfsflags |= MS_BIND; |
| } |
| |
| /* If we know the fstype (or don't need to), jump straight |
| * to the actual mount. */ |
| |
| if (mp->mnt_type || (vfsflags & (MS_REMOUNT | MS_BIND | MS_MOVE))) |
| rc = mount_it_now(mp, vfsflags, filteropts); |
| |
| // Loop through filesystem types until mount succeeds or we run out |
| |
| else { |
| |
| /* Initialize list of block backed filesystems. This has to be |
| * done here so that during "mount -a", mounts after /proc shows up |
| * can autodetect. */ |
| |
| if (!fslist) { |
| fslist = get_block_backed_filesystems(); |
| if (ENABLE_FEATURE_CLEAN_UP && fslist) |
| atexit(delete_block_backed_filesystems); |
| } |
| |
| for (fl = fslist; fl; fl = fl->link) { |
| mp->mnt_type = fl->data; |
| |
| if (!(rc = mount_it_now(mp,vfsflags, filteropts))) break; |
| |
| mp->mnt_type = 0; |
| } |
| } |
| |
| if (ENABLE_FEATURE_CLEAN_UP) free(filteropts); |
| |
| // If mount failed, clean up loop file (if any). |
| |
| if (ENABLE_FEATURE_MOUNT_LOOP && rc && loopFile) { |
| del_loop(mp->mnt_fsname); |
| if (ENABLE_FEATURE_CLEAN_UP) { |
| free(loopFile); |
| free(mp->mnt_fsname); |
| } |
| } |
| report_error: |
| if (rc && errno == EBUSY && ignore_busy) rc = 0; |
| if (rc < 0) |
| bb_perror_msg("Mounting %s on %s failed", mp->mnt_fsname, mp->mnt_dir); |
| |
| return rc; |
| } |
| |
| // Parse options, if necessary parse fstab/mtab, and call singlemount for |
| // each directory to be mounted. |
| |
| int mount_main(int argc, char **argv) |
| { |
| char *cmdopts = xstrdup(""), *fstabname, *fstype=0, *storage_path=0; |
| FILE *fstab; |
| int i, opt, all = FALSE, rc = 0; |
| struct mntent mtpair[2], *mtcur = mtpair; |
| |
| /* parse long options, like --bind and --move. Note that -o option |
| * and --option are synonymous. Yes, this means --remount,rw works. */ |
| |
| for (i = opt = 0; i < argc; i++) { |
| if (argv[i][0] == '-' && argv[i][1] == '-') { |
| append_mount_options(&cmdopts,argv[i]+2); |
| } else argv[opt++] = argv[i]; |
| } |
| argc = opt; |
| |
| // Parse remaining options |
| |
| while ((opt = getopt(argc, argv, "o:t:rwavnf")) > 0) { |
| switch (opt) { |
| case 'o': |
| append_mount_options(&cmdopts, optarg); |
| break; |
| case 't': |
| fstype = optarg; |
| break; |
| case 'r': |
| append_mount_options(&cmdopts, "ro"); |
| break; |
| case 'w': |
| append_mount_options(&cmdopts, "rw"); |
| break; |
| case 'a': |
| all = TRUE; |
| break; |
| case 'n': |
| USE_FEATURE_MTAB_SUPPORT(useMtab = FALSE;) |
| break; |
| case 'f': |
| USE_FEATURE_MTAB_SUPPORT(fakeIt = FALSE;) |
| break; |
| case 'v': |
| break; // ignore -v |
| default: |
| bb_show_usage(); |
| } |
| } |
| |
| // Three or more non-option arguments? Die with a usage message. |
| |
| if (optind-argc>2) bb_show_usage(); |
| |
| // If we have no arguments, show currently mounted filesystems |
| |
| if (optind == argc) { |
| if (!all) { |
| FILE *mountTable = setmntent(bb_path_mtab_file, "r"); |
| |
| if(!mountTable) bb_error_msg_and_die("No %s",bb_path_mtab_file); |
| |
| while (getmntent_r(mountTable,mtpair,bb_common_bufsiz1, |
| sizeof(bb_common_bufsiz1))) |
| { |
| // Don't show rootfs. |
| if (!strcmp(mtpair->mnt_fsname, "rootfs")) continue; |
| |
| if (!fstype || !strcmp(mtpair->mnt_type, fstype)) |
| printf("%s on %s type %s (%s)\n", mtpair->mnt_fsname, |
| mtpair->mnt_dir, mtpair->mnt_type, |
| mtpair->mnt_opts); |
| } |
| if (ENABLE_FEATURE_CLEAN_UP) endmntent(mountTable); |
| return EXIT_SUCCESS; |
| } |
| } |
| |
| // When we have two arguments, the second is the directory and we can |
| // skip looking at fstab entirely. We can always abspath() the directory |
| // argument when we get it. |
| |
| if (optind+2 == argc) { |
| mtpair->mnt_fsname = argv[optind]; |
| mtpair->mnt_dir = argv[optind+1]; |
| mtpair->mnt_type = fstype; |
| mtpair->mnt_opts = cmdopts; |
| rc = singlemount(mtpair, 0); |
| goto clean_up; |
| } |
| |
| // If we have at least one argument, it's the storage location |
| |
| if (optind < argc) storage_path = bb_simplify_path(argv[optind]); |
| |
| // Open either fstab or mtab |
| |
| if (parse_mount_options(cmdopts,0) & MS_REMOUNT) |
| fstabname = (char *)bb_path_mtab_file; // Again with the evil const. |
| else fstabname="/etc/fstab"; |
| |
| if (!(fstab=setmntent(fstabname,"r"))) |
| bb_perror_msg_and_die("Cannot read %s",fstabname); |
| |
| // Loop through entries until we find what we're looking for. |
| |
| memset(mtpair,0,sizeof(mtpair)); |
| for (;;) { |
| struct mntent *mtnext = mtpair + (mtcur==mtpair ? 1 : 0); |
| |
| // Get next fstab entry |
| |
| if (!getmntent_r(fstab, mtcur, bb_common_bufsiz1 |
| + (mtcur==mtpair ? sizeof(bb_common_bufsiz1)/2 : 0), |
| sizeof(bb_common_bufsiz1)/2)) |
| { |
| // Were we looking for something specific? |
| |
| if (optind != argc) { |
| |
| // If we didn't find anything, complain. |
| |
| if (!mtnext->mnt_fsname) |
| bb_error_msg_and_die("Can't find %s in %s", |
| argv[optind], fstabname); |
| |
| // Mount the last thing we found. |
| |
| mtcur = mtnext; |
| mtcur->mnt_opts = xstrdup(mtcur->mnt_opts); |
| append_mount_options(&(mtcur->mnt_opts),cmdopts); |
| rc = singlemount(mtcur, 0); |
| free(mtcur->mnt_opts); |
| } |
| goto clean_up; |
| } |
| |
| /* If we're trying to mount something specific and this isn't it, |
| * skip it. Note we must match both the exact text in fstab (ala |
| * "proc") or a full path from root */ |
| |
| if (optind != argc) { |
| |
| // Is this what we're looking for? |
| |
| if(strcmp(argv[optind],mtcur->mnt_fsname) && |
| strcmp(storage_path,mtcur->mnt_fsname) && |
| strcmp(argv[optind],mtcur->mnt_dir) && |
| strcmp(storage_path,mtcur->mnt_dir)) continue; |
| |
| // Remember this entry. Something later may have overmounted |
| // it, and we want the _last_ match. |
| |
| mtcur = mtnext; |
| |
| // If we're mounting all. |
| |
| } else { |
| |
| // Do we need to match a filesystem type? |
| if (fstype && strcmp(mtcur->mnt_type,fstype)) continue; |
| |
| // Skip noauto and swap anyway. |
| |
| if (parse_mount_options(mtcur->mnt_opts,0) |
| & (MOUNT_NOAUTO | MOUNT_SWAP)) continue; |
| |
| // Mount this thing. |
| |
| if (singlemount(mtcur, 1)) { |
| /* Count number of failed mounts */ |
| rc++; |
| } |
| } |
| } |
| if (ENABLE_FEATURE_CLEAN_UP) endmntent(fstab); |
| |
| clean_up: |
| |
| if (ENABLE_FEATURE_CLEAN_UP) { |
| free(storage_path); |
| free(cmdopts); |
| } |
| |
| return rc; |
| } |