blob: 450c4a6d4593b2258a0ef01b6736bad3ce787f82 [file] [log] [blame]
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
#
mainmenu "BusyBox Configuration"
config HAVE_DOT_CONFIG
bool
default y
menu "Busybox Settings"
menu "General Configuration"
config NITPICK
bool "See lots more (probably unnecessary) configuration options."
default n
help
Some BusyBox applets have more configuration options than anyone
will ever care about. To avoid drowining people in complexity, most
of the applet features that can be set to a sane default value are
hidden, unless you hit the above switch.
This is better than to telling people to edit the busybox source
code, but not by much.
See http://en.wikipedia.org/wiki/Fibber_McGee_and_Molly#The_Closet
You have been warned.
config DESKTOP
bool "Enable options for full-blown desktop systems"
default n
help
Enable options and features which are not essential.
Select this only if you plan to use busybox on full-blown
desktop machine with common Linux distro, not on an embedded box.
choice
prompt "Buffer allocation policy"
default FEATURE_BUFFERS_USE_MALLOC
depends on NITPICK
help
There are 3 ways BusyBox can handle buffer allocations:
- Use malloc. This costs code size for the call to xmalloc.
- Put them on stack. For some very small machines with limited stack
space, this can be deadly. For most folks, this works just fine.
- Put them in BSS. This works beautifully for computers with a real
MMU (and OS support), but wastes runtime RAM for uCLinux. This
behavior was the only one available for BusyBox versions 0.48 and
earlier.
config FEATURE_BUFFERS_USE_MALLOC
bool "Allocate with Malloc"
config FEATURE_BUFFERS_GO_ON_STACK
bool "Allocate on the Stack"
config FEATURE_BUFFERS_GO_IN_BSS
bool "Allocate in the .bss section"
endchoice
config SHOW_USAGE
bool "Show terse applet usage messages"
default y
help
All BusyBox applets will show help messages when invoked with
wrong arguments. You can turn off printing these terse usage
messages if you say no here.
This will save you up to 7k.
config FEATURE_VERBOSE_USAGE
bool "Show verbose applet usage messages"
default n
select SHOW_USAGE
help
All BusyBox applets will show more verbose help messages when
busybox is invoked with --help. This will add a lot of text to the
busybox binary. In the default configuration, this will add about
13k, but it can add much more depending on your configuration.
config FEATURE_COMPRESS_USAGE
bool "Store applet usage messages in compressed form"
default y
depends on SHOW_USAGE
help
Store usage messages in compressed form, uncompress them on-the-fly
when <applet> --help is called.
If you have a really tiny busybox with few applets enabled (and
bunzip2 isn't one of them), the overhead of the decompressor might
be noticeable. Also, if you run executables directly from ROM
and have very little memory, this might not be a win. Otherwise,
you probably want this.
config FEATURE_INSTALLER
bool "Support --install [-s] to install applet links at runtime"
default n
help
Enable 'busybox --install [-s]' support. This will allow you to use
busybox at runtime to create hard links or symlinks for all the
applets that are compiled into busybox.
config LOCALE_SUPPORT
bool "Enable locale support (system needs locale for this to work)"
default n
help
Enable this if your system has locale support and you would like
busybox to support locale settings.
config GETOPT_LONG
bool "Enable support for --long-options"
default y
help
Enable this if you want busybox applets to use the gnu --long-option
style, in addition to single character -a -b -c style options.
config FEATURE_DEVPTS
bool "Use the devpts filesystem for Unix98 PTYs"
default y
help
Enable if you want BusyBox to use Unix98 PTY support. If enabled,
busybox will use /dev/ptmx for the master side of the pseudoterminal
and /dev/pts/<number> for the slave side. Otherwise, BSD style
/dev/ttyp<number> will be used. To use this option, you should have
devpts mounted.
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
depends on NITPICK
help
As a size optimization, busybox normally exits without explicitly
freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
config FEATURE_PIDFILE
bool "Support writing pidfiles"
default n
help
This option makes some applets (e.g. crond, syslogd, inetd) write
a pidfile in /var/run. Some applications rely on them.
config FEATURE_SUID
bool "Support for SUID/SGID handling"
default n
help
With this option you can install the busybox binary belonging
to root with the suid bit set, and it'll and it'll automatically drop
priviledges for applets that don't need root access.
If you're really paranoid and don't want to do this, build two
busybox binaries with different applets in them (and the appropriate
symlinks pointing to each binary), and only set the suid bit on the
one that needs it. The applets currently marked to need the suid bit
are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
and vlock.
config FEATURE_SUID_CONFIG
bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
default n if FEATURE_SUID
depends on FEATURE_SUID
help
Allow the SUID / SGID state of an applet to be determined at runtime
by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
The format of this file is as follows:
<applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
An example might help:
[SUID]
su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
su = ssx # exactly the same
mount = sx- root.disk # applet mount can be run by root and members of group disk
# and runs with euid=0
cp = --- # disable applet cp for everyone
The file has to be owned by user root, group root and has to be
writeable only by root:
(chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
The busybox executable has to be owned by user root, group
root and has to be setuid root for this to work:
(chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
Robert 'sandman' Griebl has more information here:
<url: http://www.softforge.de/bb/suid.html >.
config FEATURE_SUID_CONFIG_QUIET
bool "Suppress warning message if /etc/busybox.conf is not readable"
default y
depends on FEATURE_SUID_CONFIG
help
/etc/busybox.conf should be readable by the user needing the SUID, check
this option to avoid users to be notified about missing permissions.
config SELINUX
bool "Support NSA Security Enhanced Linux"
default n
help
Enable support for SELinux in applets ls, ps, and id. Also provide
the option of compiling in SELinux applets.
If you do not have a complete SELinux userland installed, this stuff
will not compile. Go visit
http://www.nsa.gov/selinux/index.html
to download the necessary stuff to allow busybox to compile with
this option enabled. Specifially, libselinux 1.28 or better is
directly required by busybox. If the installation is located in a
non-standard directory, provide it by invoking make as follows:
CFLAGS=-I<libselinux-include-path> \
LDFLAGS=-L<libselinux-lib-path> \
make
Most people will leave this set to 'N'.
config FEATURE_PREFER_APPLETS
bool "exec prefers applets"
default n
help
This is an experimental option which directs applets about to
call 'exec' to try and find an applicable busybox applet before
searching the PATH. This is typically done by exec'ing
/proc/self/exe.
This may affect shell, find -exec, xargs and similar applets.
They will use applets even if /bin/<applet> -> busybox link
is missing (or is not a link to busybox). However, this causes
problems in chroot jails without mounted /proc and with ps/top
(command name can be shown as 'exe' for applets started this way).
config BUSYBOX_EXEC_PATH
string "Path to BusyBox executable"
default "/proc/self/exe"
help
When Busybox applets need to run other busybox applets, BusyBox
sometimes needs to exec() itself. When the /proc filesystem is
mounted, /proc/self/exe always points to the currently running
executable. If you haven't got /proc, set this to wherever you
want to run BusyBox from.
# These are auto-selected by other options
config FEATURE_SYSLOG
bool "Support for logging to syslog"
default n
help
This option is auto-selected when you select any applet which may
send its output to syslog. You do not need to select it manually.
config FEATURE_HAVE_RPC
bool "RPC support"
default n
help
This is automatically selected if any of enabled applets need it.
You do not need to select it manually.
endmenu
menu 'Build Options'
config STATIC
bool "Build BusyBox as a static binary (no shared libs)"
default n
help
If you want to build a static BusyBox binary, which does not
use or require any shared libraries, then enable this option.
This can cause BusyBox to be considerably larger, so you should
leave this option false unless you have a good reason (i.e.
your target platform does not support shared libraries, or
you are building an initrd which doesn't need anything but
BusyBox, etc).
Most people will leave this set to 'N'.
config BUILD_LIBBUSYBOX
bool "Build shared libbusybox"
default n
help
Build a shared library libbusybox.so which contains all
libraries used inside busybox.
This is an experimental feature intended to support the upcoming
"make standalone" mode. Enabling it against the one big busybox
binary serves no purpose (and increases the size). You should
almost certainly say "no" to this right now.
config FEATURE_FULL_LIBBUSYBOX
bool "Feature-complete libbusybox"
default n if !FEATURE_SHARED_BUSYBOX
depends on BUILD_LIBBUSYBOX
help
Build a libbusybox with the complete feature-set, disregarding
the actually selected config.
Normally, libbusybox will only contain the features which are
used by busybox itself. If you plan to write a separate
standalone application which uses libbusybox say 'Y'.
Note: libbusybox is GPL, not LGPL, and exports no stable API that
might act as a copyright barrier. We can and will modify the
exported function set between releases (even minor version number
changes), and happily break out-of-tree features.
Say 'N' if in doubt.
config FEATURE_SHARED_BUSYBOX
bool "Use shared libbusybox for busybox"
default y if BUILD_LIBBUSYBOX
depends on !STATIC && BUILD_LIBBUSYBOX
help
Use libbusybox.so also for busybox itself.
You need to have a working dynamic linker to use this variant.
config LFS
bool "Build with Large File Support (for accessing files > 2 GB)"
default n
select FDISK_SUPPORT_LARGE_DISKS
help
If you want to build BusyBox with large file support, then enable
this option. This will have no effect if your kernel or your C
library lacks large file support for large files. Some of the
programs that can benefit from large file support include dd, gzip,
cp, mount, tar, and many others. If you want to access files larger
than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
config BUILD_AT_ONCE
bool "Compile all sources at once"
default n
help
Normally each source-file is compiled with one invocation of
the compiler.
If you set this option, all sources are compiled at once.
This gives the compiler more opportunities to optimize which can
result in smaller and/or faster binaries.
Setting this option will consume alot of memory, e.g. if you
enable all applets with all features, gcc uses more than 300MB
RAM during compilation of busybox.
This option is most likely only beneficial for newer compilers
such as gcc-4.1 and above.
Say 'N' unless you know what you are doing.
endmenu
menu 'Debugging Options'
config DEBUG
bool "Build BusyBox with extra Debugging symbols"
default n
help
Say Y here if you wish to examine BusyBox internals while applets are
running. This increases the size of the binary considerably, and
should only be used when doing development. If you are doing
development and want to debug BusyBox, answer Y.
Most people should answer N.
config WERROR
bool "Abort compilation on any warning"
default n
help
Selecting this will add -Werror to gcc command line.
Most people should answer N.
# Seems to be unused
#config DEBUG_PESSIMIZE
# bool "Disable compiler optimizations."
# default n
# depends on DEBUG
# help
# The compiler's optimization of source code can eliminate and reorder
# code, resulting in an executable that's hard to understand when
# stepping through it with a debugger. This switches it off, resulting
# in a much bigger executable that more closely matches the source
# code.
choice
prompt "Additional debugging library"
default NO_DEBUG_LIB
help
Using an additional debugging library will make BusyBox become
considerable larger and will cause it to run more slowly. You
should always leave this option disabled for production use.
dmalloc support:
----------------
This enables compiling with dmalloc ( http://dmalloc.com/ )
which is an excellent public domain mem leak and malloc problem
detector. To enable dmalloc, before running busybox you will
want to properly set your environment, for example:
export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
The 'debug=' value is generated using the following command
dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
-p check-fence -p check-heap -p check-lists -p check-blank \
-p check-funcs -p realloc-copy -p allow-free-null
Electric-fence support:
-----------------------
This enables compiling with Electric-fence support. Electric
fence is another very useful malloc debugging library which uses
your computer's virtual memory hardware to detect illegal memory
accesses. This support will make BusyBox be considerable larger
and run slower, so you should leave this option disabled unless
you are hunting a hard to find memory problem.
config NO_DEBUG_LIB
bool "None"
config DMALLOC
bool "Dmalloc"
config EFENCE
bool "Electric-fence"
endchoice
config INCLUDE_SUSv2
bool "Enable obsolete features removed before SUSv3?"
default y
help
This option will enable backwards compatibility with SuSv2,
specifically, old-style numeric options ('command -1 <file>')
will be supported in head, tail, and fold. (Note: should
affect renice too.)
endmenu
menu 'Installation Options'
config INSTALL_NO_USR
bool "Don't use /usr"
default n
help
Disable use of /usr. Don't activate this option if you don't know
that you really want this behaviour.
choice
prompt "Applets links"
default INSTALL_APPLET_SYMLINKS
help
Choose how you install applets links.
config INSTALL_APPLET_SYMLINKS
bool "as soft-links"
help
Install applets as soft-links to the busybox binary. This needs some
free inodes on the filesystem, but might help with filesystem
generators that can't cope with hard-links.
config INSTALL_APPLET_HARDLINKS
bool "as hard-links"
help
Install applets as hard-links to the busybox binary. This might count
on a filesystem with few inodes.
config INSTALL_APPLET_SCRIPT_WRAPPERS
bool "as script wrappers"
help
Install applets as script wrappers that call the busybox binary.
config INSTALL_APPLET_DONT
bool "not installed"
depends on FEATURE_INSTALLER || FEATURE_SH_STANDALONE || FEATURE_PREFER_APPLETS
help
Do not install applet links. Useful when using the -install feature
or a standalone shell for rescue purposes.
endchoice
choice
prompt "/bin/sh applet link"
default INSTALL_SH_APPLET_SYMLINK
depends on INSTALL_APPLET_SCRIPT_WRAPPERS
help
Choose how you install /bin/sh applet link.
config INSTALL_SH_APPLET_SYMLINK
bool "as soft-link"
help
Install /bin/sh applet as soft-link to the busybox binary.
config INSTALL_SH_APPLET_HARDLINK
bool "as hard-link"
help
Install /bin/sh applet as hard-link to the busybox binary.
config INSTALL_SH_APPLET_SCRIPT_WRAPPER
bool "as script wrapper"
help
Install /bin/sh applet as script wrapper that call the busybox binary.
endchoice
config PREFIX
string "BusyBox installation prefix"
default "./_install"
help
Define your directory to install BusyBox files/subdirs in.
endmenu
source libbb/Config.in
endmenu
comment "Applets"
source archival/Config.in
source coreutils/Config.in
source console-tools/Config.in
source debianutils/Config.in
source editors/Config.in
source findutils/Config.in
source init/Config.in
source loginutils/Config.in
source e2fsprogs/Config.in
source modutils/Config.in
source util-linux/Config.in
source miscutils/Config.in
source networking/Config.in
source procps/Config.in
source shell/Config.in
source sysklogd/Config.in
source runit/Config.in
source selinux/Config.in
source ipsvd/Config.in