| # |
| # For a description of the syntax of this configuration file, |
| # see scripts/kbuild/config-language.txt. |
| # |
| |
| mainmenu "BusyBox Configuration" |
| |
| config HAVE_DOT_CONFIG |
| bool |
| default y |
| |
| menu "General Configuration" |
| |
| choice |
| prompt "Buffer allocation policy" |
| default "Allocate with Malloc" |
| help |
| There are 3 ways BusyBox can handle buffer allocations: |
| - Use malloc. This costs code size for the call to xmalloc. |
| - Put them on stack. For some very small machines with limited stack |
| space, this can be deadly. For most folks, this works just fine. |
| - Put them in BSS. This works beautifully for computers with a real |
| MMU (and OS support), but wastes runtime RAM for uCLinux. This |
| behavior was the only one available for BusyBox versions 0.48 and |
| earlier. |
| |
| config CONFIG_FEATURE_BUFFERS_USE_MALLOC |
| bool "Allocate with Malloc" |
| |
| config CONFIG_FEATURE_BUFFERS_GO_ON_STACK |
| bool "Allocate on the Stack" |
| |
| config CONFIG_FEATURE_BUFFERS_GO_IN_BSS |
| bool "Allocate in the .bss section" |
| |
| endchoice |
| |
| config CONFIG_FEATURE_VERBOSE_USAGE |
| bool "Show verbose applet usage messages" |
| default n |
| help |
| All BusyBox applets will show more verbose help messages when |
| busybox is invoked with --help. This will add lots of text to the |
| busybox binary. In the default configuration, this will add about |
| 13k, but it can add much more depending on your configuration. |
| |
| config CONFIG_FEATURE_INSTALLER |
| bool "Support --install [-s] to install applet links at runtime" |
| default n |
| help |
| Enable 'busybox --install [-s]' support. This will allow you to use |
| busybox at runtime to create hard links or symlinks for all the |
| applets that are compiled into busybox. This feature requires the |
| /proc filesystem. |
| |
| config CONFIG_LOCALE_SUPPORT |
| bool "Enable locale support (system needs locale for this to work)" |
| default n |
| help |
| Enable this if your system has locale support, and you would like |
| busybox to support locale settings. |
| |
| config CONFIG_FEATURE_DEVFS |
| bool "Support for devfs" |
| default n |
| help |
| Enable if you want BusyBox to work with devfs. |
| |
| config CONFIG_FEATURE_DEVPTS |
| bool "Use the devpts filesystem for Unix98 PTYs" |
| default y if CONFIG_FEATURE_DEVFS |
| help |
| Enable if you want BusyBox to use Unix98 PTY support. If enabled, |
| busybox will use /dev/ptmx for the master side of the pseudoterminal |
| and /dev/pts/<number> for the slave side. Otherwise, BSD style |
| /dev/ttyp<number> will be used. To use this option, you should have |
| devpts or devfs mounted. |
| |
| config CONFIG_FEATURE_CLEAN_UP |
| bool "Clean up all memory before exiting (usually not needed)" |
| default n |
| help |
| As a size optimization, busybox by default does not cleanup memory |
| that is dynamically allocated or close files before exiting. This |
| saves space and is usually not needed since the OS will clean up for |
| us. Don't enable this unless you have a really good reason to clean |
| things up manually. |
| |
| config CONFIG_FEATURE_SUID |
| bool "Support for SUID/SGID handling" |
| default n |
| help |
| Please submit a patch to add help text for this item. |
| |
| config CONFIG_FEATURE_SUID_CONFIG |
| bool "Runtime SUID/SGID configuration via /etc/busybox.conf" |
| default y if CONFIG_FEATURE_SUID |
| depends on CONFIG_FEATURE_SUID |
| help |
| Please submit a patch to add help text for this item. |
| |
| config CONFIG_FEATURE_SUID_CONFIG_QUIET |
| bool "Suppress warning message if /etc/busybox.conf is not readable" |
| default n |
| depends on CONFIG_FEATURE_SUID_CONFIG |
| help |
| Please submit a patch to add help text for this item. |
| |
| endmenu |
| |
| menu 'Build Options' |
| |
| config DOSTATIC |
| bool "Build BusyBox as a static binary (no shared libs)" |
| default n |
| help |
| If you want to build a static BusyBox binary, which does not |
| use or require any shared libraries, then enable this option. |
| |
| config DOLFS |
| bool "Build with Large File Support (for accessing files > 2 GB)" |
| default n |
| help |
| If you want to build BusyBox with large file support, then enable |
| this option. This will have no effect if your kernel or your C |
| library lacks large file support for large files. Some of the |
| programs that can benefit from large file support include dd, gzip, |
| cp, mount, tar, and many others. If you want to access files larger |
| than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'. |
| |
| config USING_CROSS_COMPILER |
| bool "Do you want to build BusyBox with a Cross Compiler?" |
| default n |
| help |
| Do you want to build BusyBox with a Cross Compiler? If so, |
| then enable this option. Otherwise leave it set to 'N'. |
| |
| config CROSS_COMPILER_PREFIX |
| string "Cross Compiler prefix" |
| default "/usr/i386-linux-uclibc/bin/i386-uclibc-" |
| depends on USING_CROSS_COMPILER |
| help |
| If you want to build BusyBox with a cross compiler, then you |
| will need to set this to the cross-compiler prefix. For example, |
| if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc |
| then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here, |
| which will ensure the correct compiler is used. |
| |
| config EXTRA_CFLAGS_OPTIONS |
| string "Any extra CFLAGS options for the compiler?" |
| default "" |
| help |
| Do you want to pass any extra CFLAGS options to the compiler as |
| you build BusyBox? If so, this is the option for you... For example, |
| if you want to add some simple compiler switches (like -march=i686), |
| or check for warnings using -Werror, just those options here. |
| |
| endmenu |
| |
| menu 'Installation Options' |
| |
| config CONFIG_INSTALL_NO_USR |
| bool "Don't use /usr" |
| default n |
| help |
| Disable use of /usr. Don't activate this option if you don't know, |
| that you really want this behaviour. |
| |
| config PREFIX |
| string "BusyBox installation prefix" |
| default "./_install" |
| help |
| Define Your directory to install BusyBox files/subdirs. |
| |
| |
| |
| endmenu |
| |
| source archival/Config.in |
| source console-tools/Config.in |
| source debianutils/Config.in |
| source editors/Config.in |
| source fileutils/Config.in |
| source findutils/Config.in |
| source init/Config.in |
| source loginutils/Config.in |
| source miscutils/Config.in |
| source modutils/Config.in |
| source networking/Config.in |
| source procps/Config.in |
| source shell/Config.in |
| source shellutils/Config.in |
| source sysklogd/Config.in |
| source textutils/Config.in |
| source util-linux/Config.in |
| |
| menu 'Debugging Options' |
| |
| config DOSTATIC |
| bool "Build BusyBox as a static binary (no shared libs)" |
| default n |
| help |
| If you want to build a static BusyBox binary, which does not |
| use or require any shared libraries, then enable this option. |
| This will make BusyBox be considerable larger, so you should |
| leave this option false unless you have a good reason (i.e. |
| your target platform does not support shared libraries, or |
| you are building an initrd which doesn't need anything but |
| BusyBox, etc). |
| |
| Most people will leave this set to 'N'. |
| |
| config DODEBUG |
| bool "Build BusyBox with Debugging symbols" |
| default n |
| help |
| Say Y here if you wish to compile BusyBox with debugging symbols. |
| This will allow you to use a debugger to examine BusyBox internals |
| while applets are running. This increases the size of the binary |
| considerably and should only be used when doing development. |
| If you are doing development and want to debug BusyBox, answer Y. |
| |
| Otherwise, answer N. |
| |
| config DODMALLOC |
| bool "Build BusyBox with dmalloc support" |
| default n |
| depends on DODEBUG && !DOEFENCE |
| help |
| This enables compiling with dmalloc ( http://dmalloc.com/ ) |
| which is an excellent public domain mem leak and malloc problem |
| detector. To enable dmalloc, before running busybox you will |
| want to properly set your environment, for example: |
| export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile |
| The 'debug=' value is generated using the following command |
| dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \ |
| -p check-fence -p check-heap -p check-lists -p check-blank \ |
| -p check-funcs -p realloc-copy -p allow-free-null |
| |
| This will make BusyBox be considerable larger and run slower, so |
| you should leave this option disabled for production use. |
| |
| config DOEFENCE |
| bool "Build BusyBox with Electric-fence support" |
| default n |
| depends on DODEBUG && !DODMALLOC |
| help |
| This enables compiling with Electric-fence support. Electric |
| fence is another very useful malloc debugging library which used |
| your computers virtual memory hardware to detect illegal memory |
| accesses. This support will make BusyBox be considerable larger |
| and run slower, so you should leave this option disabled unless |
| you are hunting a hard to find memory problem. |
| |
| endmenu |
| |