Initial merge of all tinylogin applets that do not require crypt.
There is some optimization that can be done to better use libbb in
these applets. There is also redundancy between stty and getty which
could be eliminated.
-Erik
diff --git a/getty.c b/getty.c
new file mode 100644
index 0000000..a5a0dc7
--- /dev/null
+++ b/getty.c
@@ -0,0 +1,1230 @@
+/* vi: set sw=4 ts=4: */
+/* agetty.c - another getty program for Linux. By W. Z. Venema 1989
+ Ported to Linux by Peter Orbaek <poe@daimi.aau.dk>
+ This program is freely distributable. The entire man-page used to
+ be here. Now read the real man-page agetty.8 instead.
+
+ -f option added by Eric Rasmussen <ear@usfirst.org> - 12/28/95
+
+ 1999-02-22 Arkadiusz Mi¶kiewicz <misiek@misiek.eu.org>
+ - added Native Language Support
+
+ 1999-05-05 Thorsten Kranzkowski <dl8bcu@gmx.net>
+ - enable hardware flow control before displaying /etc/issue
+
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <sys/signal.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <utmp.h>
+#include <getopt.h>
+#include <termios.h>
+#include "busybox.h"
+
+#define _PATH_LOGIN "/bin/login"
+
+#ifdef linux
+#include <sys/param.h>
+#define USE_SYSLOG
+#endif
+
+extern void updwtmp(const char *filename, const struct utmp *ut);
+
+ /* If USE_SYSLOG is undefined all diagnostics go directly to /dev/console. */
+#ifdef USE_SYSLOG
+#include <syslog.h>
+#endif
+
+
+ /*
+ * Some heuristics to find out what environment we are in: if it is not
+ * System V, assume it is SunOS 4.
+ */
+
+#ifdef LOGIN_PROCESS /* defined in System V utmp.h */
+#define SYSV_STYLE /* select System V style getty */
+#endif
+
+ /*
+ * Things you may want to modify.
+ *
+ * If ISSUE is not defined, agetty will never display the contents of the
+ * /etc/issue file. You will not want to spit out large "issue" files at the
+ * wrong baud rate. Relevant for System V only.
+ *
+ * You may disagree with the default line-editing etc. characters defined
+ * below. Note, however, that DEL cannot be used for interrupt generation
+ * and for line editing at the same time.
+ */
+
+#ifdef SYSV_STYLE
+#define ISSUE "/etc/issue" /* displayed before the login prompt */
+#include <sys/utsname.h>
+#include <time.h>
+#endif
+
+#define LOGIN " login: " /* login prompt */
+
+/* Some shorthands for control characters. */
+
+#define CTL(x) (x ^ 0100) /* Assumes ASCII dialect */
+#define CR CTL('M') /* carriage return */
+#define NL CTL('J') /* line feed */
+#define BS CTL('H') /* back space */
+#define DEL CTL('?') /* delete */
+
+/* Defaults for line-editing etc. characters; you may want to change this. */
+
+#define DEF_ERASE DEL /* default erase character */
+#define DEF_INTR CTL('C') /* default interrupt character */
+#define DEF_QUIT CTL('\\') /* default quit char */
+#define DEF_KILL CTL('U') /* default kill char */
+#define DEF_EOF CTL('D') /* default EOF char */
+#define DEF_EOL 0
+#define DEF_SWITCH 0 /* default switch char */
+
+ /*
+ * SunOS 4.1.1 termio is broken. We must use the termios stuff instead,
+ * because the termio -> termios translation does not clear the termios
+ * CIBAUD bits. Therefore, the tty driver would sometimes report that input
+ * baud rate != output baud rate. I did not notice that problem with SunOS
+ * 4.1. We will use termios where available, and termio otherwise.
+ */
+
+/* linux 0.12 termio is broken too, if we use it c_cc[VERASE] isn't set
+ properly, but all is well if we use termios?! */
+
+#ifdef TCGETS
+#undef TCGETA
+#undef TCSETA
+#undef TCSETAW
+#define termio termios
+#define TCGETA TCGETS
+#define TCSETA TCSETS
+#define TCSETAW TCSETSW
+#endif
+
+ /*
+ * This program tries to not use the standard-i/o library. This keeps the
+ * executable small on systems that do not have shared libraries (System V
+ * Release <3).
+ */
+#ifndef BUFSIZ
+#define BUFSIZ 1024
+#endif
+
+ /*
+ * When multiple baud rates are specified on the command line, the first one
+ * we will try is the first one specified.
+ */
+
+#define FIRST_SPEED 0
+
+/* Storage for command-line options. */
+
+#define MAX_SPEED 10 /* max. nr. of baud rates */
+
+struct options {
+ int flags; /* toggle switches, see below */
+ int timeout; /* time-out period */
+ char *login; /* login program */
+ char *tty; /* name of tty */
+ char *initstring; /* modem init string */
+ char *issue; /* alternative issue file */
+ int numspeed; /* number of baud rates to try */
+ int speeds[MAX_SPEED]; /* baud rates to be tried */
+};
+
+#define F_PARSE (1<<0) /* process modem status messages */
+#define F_ISSUE (1<<1) /* display /etc/issue */
+#define F_RTSCTS (1<<2) /* enable RTS/CTS flow control */
+#define F_LOCAL (1<<3) /* force local */
+#define F_INITSTRING (1<<4) /* initstring is set */
+#define F_WAITCRLF (1<<5) /* wait for CR or LF */
+#define F_CUSTISSUE (1<<6) /* give alternative issue file */
+#define F_NOPROMPT (1<<7) /* don't ask for login name! */
+
+/* Storage for things detected while the login name was read. */
+
+struct chardata {
+ int erase; /* erase character */
+ int kill; /* kill character */
+ int eol; /* end-of-line character */
+ int parity; /* what parity did we see */
+ int capslock; /* upper case without lower case */
+};
+
+/* Initial values for the above. */
+
+struct chardata init_chardata = {
+ DEF_ERASE, /* default erase character */
+ DEF_KILL, /* default kill character */
+ 13, /* default eol char */
+ 0, /* space parity */
+ 0, /* no capslock */
+};
+
+struct Speedtab {
+ long speed;
+ int code;
+};
+
+static struct Speedtab speedtab[] = {
+ {50, B50},
+ {75, B75},
+ {110, B110},
+ {134, B134},
+ {150, B150},
+ {200, B200},
+ {300, B300},
+ {600, B600},
+ {1200, B1200},
+ {1800, B1800},
+ {2400, B2400},
+ {4800, B4800},
+ {9600, B9600},
+#ifdef B19200
+ {19200, B19200},
+#endif
+#ifdef B38400
+ {38400, B38400},
+#endif
+#ifdef EXTA
+ {19200, EXTA},
+#endif
+#ifdef EXTB
+ {38400, EXTB},
+#endif
+#ifdef B57600
+ {57600, B57600},
+#endif
+#ifdef B115200
+ {115200, B115200},
+#endif
+#ifdef B230400
+ {230400, B230400},
+#endif
+ {0, 0},
+};
+
+void parse_args(int argc, char **argv, struct options *op);
+void parse_speeds(struct options *op, char *arg);
+void update_utmp(char *line);
+void open_tty(char *tty, struct termio *tp, int local);
+void termio_init(struct termio *tp, int speed, struct options *op);
+void auto_baud(struct termio *tp);
+void do_prompt(struct options *op, struct termio *tp);
+void next_speed(struct termio *tp, struct options *op);
+char *get_logname(struct options *op, struct chardata *cp,
+
+ struct termio *tp);
+void termio_final(struct options *op, struct termio *tp,
+
+ struct chardata *cp);
+int caps_lock(char *s);
+int bcode(char *s);
+static void error(const char *fmt, ...);
+
+/* The following is used for understandable diagnostics. */
+
+char *progname;
+
+/* Fake hostname for ut_host specified on command line. */
+char *fakehost = NULL;
+
+/* ... */
+#ifdef DEBUGGING
+#define debug(s) fprintf(dbf,s); fflush(dbf)
+#define DEBUGTERM "/dev/ttyp0"
+FILE *dbf;
+#else
+#define debug(s) /* nothing */
+#endif
+
+int getty_main(int argc, char **argv)
+{
+ char *logname = NULL; /* login name, given to /bin/login */
+ struct chardata chardata; /* set by get_logname() */
+ struct termio termio; /* terminal mode bits */
+ static struct options options = {
+ F_ISSUE, /* show /etc/issue (SYSV_STYLE) */
+ 0, /* no timeout */
+ _PATH_LOGIN, /* default login program */
+ "tty1", /* default tty line */
+ "", /* modem init string */
+ ISSUE, /* default issue file */
+ 0, /* no baud rates known yet */
+ };
+
+ /* The BSD-style init command passes us a useless process name. */
+
+#ifdef SYSV_STYLE
+ progname = argv[0];
+#else
+ progname = "getty";
+#endif
+
+#ifdef DEBUGGING
+ dbf = xfopen(DEBUGTERM, "w");
+
+ {
+ int i;
+
+ for (i = 1; i < argc; i++) {
+ debug(argv[i]);
+ debug("\n");
+ }
+ }
+#endif
+
+ /* Parse command-line arguments. */
+
+ parse_args(argc, argv, &options);
+
+#ifdef __linux__
+ setsid();
+#endif
+
+ /* Update the utmp file. */
+
+#ifdef SYSV_STYLE
+ update_utmp(options.tty);
+#endif
+
+ debug("calling open_tty\n");
+ /* Open the tty as standard { input, output, error }. */
+ open_tty(options.tty, &termio, options.flags & F_LOCAL);
+
+#ifdef __linux__
+ {
+ int iv;
+
+ iv = getpid();
+ if (ioctl(0, TIOCSPGRP, &iv) < 0)
+ perror_msg("ioctl() TIOCSPGRP call failed");
+ }
+#endif
+ /* Initialize the termio settings (raw mode, eight-bit, blocking i/o). */
+ debug("calling termio_init\n");
+ termio_init(&termio, options.speeds[FIRST_SPEED], &options);
+
+ /* write the modem init string and DON'T flush the buffers */
+ if (options.flags & F_INITSTRING) {
+ debug("writing init string\n");
+ write(1, options.initstring, strlen(options.initstring));
+ }
+
+ if (!(options.flags & F_LOCAL)) {
+ /* go to blocking write mode unless -L is specified */
+ fcntl(1, F_SETFL, fcntl(1, F_GETFL, 0) & ~O_NONBLOCK);
+ }
+
+ /* Optionally detect the baud rate from the modem status message. */
+ debug("before autobaud\n");
+ if (options.flags & F_PARSE)
+ auto_baud(&termio);
+
+ /* Set the optional timer. */
+ if (options.timeout)
+ (void) alarm((unsigned) options.timeout);
+
+ /* optionally wait for CR or LF before writing /etc/issue */
+ if (options.flags & F_WAITCRLF) {
+ char ch;
+
+ debug("waiting for cr-lf\n");
+ while (read(0, &ch, 1) == 1) {
+ ch &= 0x7f; /* strip "parity bit" */
+#ifdef DEBUGGING
+ fprintf(dbf, "read %c\n", ch);
+#endif
+ if (ch == '\n' || ch == '\r')
+ break;
+ }
+ }
+
+ chardata = init_chardata;
+ if (!(options.flags & F_NOPROMPT)) {
+ /* Read the login name. */
+ debug("reading login name\n");
+ /* while ((logname = get_logname(&options, &chardata, &termio)) == 0) */
+ while ((logname = get_logname(&options, &chardata, &termio)) ==
+ NULL) next_speed(&termio, &options);
+ }
+
+ /* Disable timer. */
+
+ if (options.timeout)
+ (void) alarm(0);
+
+ /* Finalize the termio settings. */
+
+ termio_final(&options, &termio, &chardata);
+
+ /* Now the newline character should be properly written. */
+
+ (void) write(1, "\n", 1);
+
+ /* Let the login program take care of password validation. */
+
+ (void) execl(options.login, options.login, "--", logname, (char *) 0);
+ error("%s: can't exec %s: %m", options.tty, options.login);
+ return (0); /* quiet GCC */
+}
+
+/* parse-args - parse command-line arguments */
+
+void parse_args(argc, argv, op)
+int argc;
+char **argv;
+struct options *op;
+{
+ extern char *optarg; /* getopt */
+ extern int optind; /* getopt */
+ int c;
+
+ while (isascii(c = getopt(argc, argv, "I:LH:f:hil:mt:wn"))) {
+ switch (c) {
+ case 'I':
+ if (!(op->initstring = malloc(strlen(optarg)))) {
+ error("can't malloc initstring");
+ break;
+ }
+ {
+ char ch, *p, *q;
+ int i;
+
+ /* copy optarg into op->initstring decoding \ddd
+ octal codes into chars */
+ q = op->initstring;
+ p = optarg;
+ while (*p) {
+ if (*p == '\\') { /* know \\ means \ */
+ p++;
+ if (*p == '\\') {
+ ch = '\\';
+ p++;
+ } else { /* handle \000 - \177 */
+ ch = 0;
+ for (i = 1; i <= 3; i++) {
+ if (*p >= '0' && *p <= '7') {
+ ch <<= 3;
+ ch += *p - '0';
+ p++;
+ } else
+ break;
+ }
+ }
+ *q++ = ch;
+ } else {
+ *q++ = *p++;
+ }
+ }
+ *q = '\0';
+ }
+ op->flags |= F_INITSTRING;
+ break;
+
+ case 'L': /* force local */
+ op->flags |= F_LOCAL;
+ break;
+ case 'H': /* fake login host */
+ fakehost = optarg;
+ break;
+ case 'f': /* custom issue file */
+ op->flags |= F_CUSTISSUE;
+ op->issue = optarg;
+ break;
+ case 'h': /* enable h/w flow control */
+ op->flags |= F_RTSCTS;
+ break;
+ case 'i': /* do not show /etc/issue */
+ op->flags &= ~F_ISSUE;
+ break;
+ case 'l':
+ op->login = optarg; /* non-default login program */
+ break;
+ case 'm': /* parse modem status message */
+ op->flags |= F_PARSE;
+ break;
+ case 'n':
+ op->flags |= F_NOPROMPT;
+ break;
+ case 't': /* time out */
+ if ((op->timeout = atoi(optarg)) <= 0)
+ error("bad timeout value: %s", optarg);
+ break;
+ case 'w':
+ op->flags |= F_WAITCRLF;
+ break;
+ default:
+ show_usage();
+ }
+ }
+ debug("after getopt loop\n");
+ if (argc < optind + 2) /* check parameter count */
+ show_usage();
+
+ /* we loosen up a bit and accept both "baudrate tty" and "tty baudrate" */
+ if ('0' <= argv[optind][0] && argv[optind][0] <= '9') {
+ /* a number first, assume it's a speed (BSD style) */
+ parse_speeds(op, argv[optind++]); /* baud rate(s) */
+ op->tty = argv[optind]; /* tty name */
+ } else {
+ op->tty = argv[optind++]; /* tty name */
+ parse_speeds(op, argv[optind]); /* baud rate(s) */
+ }
+
+ optind++;
+ if (argc > optind && argv[optind])
+ setenv("TERM", argv[optind], 1);
+
+ debug("exiting parseargs\n");
+}
+
+/* parse_speeds - parse alternate baud rates */
+
+void parse_speeds(op, arg)
+struct options *op;
+char *arg;
+{
+ char *strtok();
+ char *cp;
+
+ debug("entered parse_speeds\n");
+ for (cp = strtok(arg, ","); cp != 0; cp = strtok((char *) 0, ",")) {
+ if ((op->speeds[op->numspeed++] = bcode(cp)) <= 0)
+ error("bad speed: %s", cp);
+ if (op->numspeed > MAX_SPEED)
+ error("too many alternate speeds");
+ }
+ debug("exiting parsespeeds\n");
+}
+
+#ifdef SYSV_STYLE
+
+/* update_utmp - update our utmp entry */
+void update_utmp(line)
+char *line;
+{
+ struct utmp ut;
+ time_t t;
+ int mypid = getpid();
+ long time();
+ long lseek();
+ struct utmp *utp;
+
+#if ! (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1))
+ struct flock lock;
+#endif
+
+ /*
+ * The utmp file holds miscellaneous information about things started by
+ * /sbin/init and other system-related events. Our purpose is to update
+ * the utmp entry for the current process, in particular the process type
+ * and the tty line we are listening to. Return successfully only if the
+ * utmp file can be opened for update, and if we are able to find our
+ * entry in the utmp file.
+ */
+
+#ifdef __linux__
+ utmpname(_PATH_UTMP);
+ setutent();
+ while ((utp = getutent())
+ && !(utp->ut_type == INIT_PROCESS && utp->ut_pid == mypid)) /* nothing */
+ ;
+
+ if (utp) {
+ memcpy(&ut, utp, sizeof(ut));
+ } else {
+ /* some inits don't initialize utmp... */
+ memset(&ut, 0, sizeof(ut));
+ strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
+ }
+ /*endutent(); */
+
+ strncpy(ut.ut_user, "LOGIN", sizeof(ut.ut_user));
+ strncpy(ut.ut_line, line, sizeof(ut.ut_line));
+ if (fakehost)
+ strncpy(ut.ut_host, fakehost, sizeof(ut.ut_host));
+ time(&t);
+ ut.ut_time = t;
+ ut.ut_type = LOGIN_PROCESS;
+ ut.ut_pid = mypid;
+
+ pututline(&ut);
+ endutent();
+
+ {
+ updwtmp(_PATH_WTMP, &ut);
+ }
+#else /* not __linux__ */
+ {
+ int ut_fd;
+
+ if ((ut_fd = open(UTMP_FILE, 2)) < 0) {
+ error("%s: open for update: %m"), UTMP_FILE;
+ } else {
+ long ut_size = sizeof(ut); /* avoid nonsense */
+
+ while (read(ut_fd, (char *) &ut, sizeof(ut)) == sizeof(ut)) {
+ if (ut.ut_type == INIT_PROCESS && ut.ut_pid == mypid) {
+ ut.ut_type = LOGIN_PROCESS;
+ ut.ut_time = time((long *) 0);
+ (void) strncpy(ut.ut_name, "LOGIN", sizeof(ut.ut_name));
+ (void) strncpy(ut.ut_line, line, sizeof(ut.ut_line));
+ if (fakehost)
+ (void) strncpy(ut.ut_host, fakehost, sizeof(ut.ut_host));
+ (void) lseek(ut_fd, -ut_size, 1);
+ (void) write(ut_fd, (char *) &ut, sizeof(ut));
+ (void) close(ut_fd);
+ return;
+ }
+ }
+ error("%s: no utmp entry", line);
+ }
+ }
+#endif /* __linux__ */
+}
+
+#endif
+
+/* open_tty - set up tty as standard { input, output, error } */
+void open_tty(tty, tp, local)
+char *tty;
+struct termio *tp;
+int local;
+{
+ /* Get rid of the present standard { output, error} if any. */
+
+ (void) close(1);
+ (void) close(2);
+ errno = 0; /* ignore above errors */
+
+ /* Set up new standard input, unless we are given an already opened port. */
+
+ if (strcmp(tty, "-")) {
+ struct stat st;
+
+ /* Sanity checks... */
+
+ if (chdir("/dev"))
+ error("/dev: chdir() failed: %m");
+ if (stat(tty, &st) < 0)
+ error("/dev/%s: %m", tty);
+ if ((st.st_mode & S_IFMT) != S_IFCHR)
+ error("/dev/%s: not a character device", tty);
+
+ /* Open the tty as standard input. */
+
+ (void) close(0);
+ errno = 0; /* ignore close(2) errors */
+
+ debug("open(2)\n");
+ if (open(tty, O_RDWR | O_NONBLOCK, 0) != 0)
+ error("/dev/%s: cannot open as standard input: %m", tty);
+
+ } else {
+
+ /*
+ * Standard input should already be connected to an open port. Make
+ * sure it is open for read/write.
+ */
+
+ if ((fcntl(0, F_GETFL, 0) & O_RDWR) != O_RDWR)
+ error("%s: not open for read/write", tty);
+ }
+
+ /* Set up standard output and standard error file descriptors. */
+ debug("duping\n");
+ if (dup(0) != 1 || dup(0) != 2) /* set up stdout and stderr */
+ error("%s: dup problem: %m", tty); /* we have a problem */
+
+ /*
+ * The following ioctl will fail if stdin is not a tty, but also when
+ * there is noise on the modem control lines. In the latter case, the
+ * common course of action is (1) fix your cables (2) give the modem more
+ * time to properly reset after hanging up. SunOS users can achieve (2)
+ * by patching the SunOS kernel variable "zsadtrlow" to a larger value;
+ * 5 seconds seems to be a good value.
+ */
+
+ if (ioctl(0, TCGETA, tp) < 0)
+ error("%s: ioctl: %m", tty);
+
+ /*
+ * It seems to be a terminal. Set proper protections and ownership. Mode
+ * 0622 is suitable for SYSV <4 because /bin/login does not change
+ * protections. SunOS 4 login will change the protections to 0620 (write
+ * access for group tty) after the login has succeeded.
+ */
+
+#ifdef DEBIAN
+ {
+ /* tty to root.dialout 660 */
+ struct group *gr;
+ int id;
+
+ id = (gr = getgrnam("dialout")) ? gr->gr_gid : 0;
+ chown(tty, 0, id);
+ chmod(tty, 0660);
+
+ /* vcs,vcsa to root.sys 600 */
+ if (!strncmp(tty, "tty", 3) && isdigit(tty[3])) {
+ char *vcs, *vcsa;
+
+ if (!(vcs = malloc(strlen(tty))))
+ error("Can't malloc for vcs");
+ if (!(vcsa = malloc(strlen(tty) + 1)))
+ error("Can't malloc for vcsa");
+ strcpy(vcs, "vcs");
+ strcpy(vcs + 3, tty + 3);
+ strcpy(vcsa, "vcsa");
+ strcpy(vcsa + 4, tty + 3);
+
+ id = (gr = getgrnam("sys")) ? gr->gr_gid : 0;
+ chown(vcs, 0, id);
+ chmod(vcs, 0600);
+ chown(vcsa, 0, id);
+ chmod(vcs, 0600);
+
+ free(vcs);
+ free(vcsa);
+ }
+ }
+#else
+ (void) chown(tty, 0, 0); /* root, sys */
+ (void) chmod(tty, 0622); /* crw--w--w- */
+ errno = 0; /* ignore above errors */
+#endif
+}
+
+/* termio_init - initialize termio settings */
+
+char gbuf[1024];
+char area[1024];
+
+void termio_init(tp, speed, op)
+struct termio *tp;
+int speed;
+struct options *op;
+{
+
+ /*
+ * Initial termio settings: 8-bit characters, raw-mode, blocking i/o.
+ * Special characters are set after we have read the login name; all
+ * reads will be done in raw mode anyway. Errors will be dealt with
+ * lateron.
+ */
+#ifdef __linux__
+ /* flush input and output queues, important for modems! */
+ (void) ioctl(0, TCFLSH, TCIOFLUSH);
+#endif
+
+ tp->c_cflag = CS8 | HUPCL | CREAD | speed;
+ if (op->flags & F_LOCAL) {
+ tp->c_cflag |= CLOCAL;
+ }
+
+ tp->c_iflag = tp->c_lflag = tp->c_oflag = tp->c_line = 0;
+ tp->c_cc[VMIN] = 1;
+ tp->c_cc[VTIME] = 0;
+
+ /* Optionally enable hardware flow control */
+
+#ifdef CRTSCTS
+ if (op->flags & F_RTSCTS)
+ tp->c_cflag |= CRTSCTS;
+#endif
+
+ (void) ioctl(0, TCSETA, tp);
+
+ /* go to blocking input even in local mode */
+ fcntl(0, F_SETFL, fcntl(0, F_GETFL, 0) & ~O_NONBLOCK);
+
+ debug("term_io 2\n");
+}
+
+/* auto_baud - extract baud rate from modem status message */
+void auto_baud(tp)
+struct termio *tp;
+{
+ int speed;
+ int vmin;
+ unsigned iflag;
+ char buf[BUFSIZ];
+ char *bp;
+ int nread;
+
+ /*
+ * This works only if the modem produces its status code AFTER raising
+ * the DCD line, and if the computer is fast enough to set the proper
+ * baud rate before the message has gone by. We expect a message of the
+ * following format:
+ *
+ * <junk><number><junk>
+ *
+ * The number is interpreted as the baud rate of the incoming call. If the
+ * modem does not tell us the baud rate within one second, we will keep
+ * using the current baud rate. It is advisable to enable BREAK
+ * processing (comma-separated list of baud rates) if the processing of
+ * modem status messages is enabled.
+ */
+
+ /*
+ * Use 7-bit characters, don't block if input queue is empty. Errors will
+ * be dealt with lateron.
+ */
+
+ iflag = tp->c_iflag;
+ tp->c_iflag |= ISTRIP; /* enable 8th-bit stripping */
+ vmin = tp->c_cc[VMIN];
+ tp->c_cc[VMIN] = 0; /* don't block if queue empty */
+ (void) ioctl(0, TCSETA, tp);
+
+ /*
+ * Wait for a while, then read everything the modem has said so far and
+ * try to extract the speed of the dial-in call.
+ */
+
+ (void) sleep(1);
+ if ((nread = read(0, buf, sizeof(buf) - 1)) > 0) {
+ buf[nread] = '\0';
+ for (bp = buf; bp < buf + nread; bp++) {
+ if (isascii(*bp) && isdigit(*bp)) {
+ if ((speed = bcode(bp))) {
+ tp->c_cflag &= ~CBAUD;
+ tp->c_cflag |= speed;
+ }
+ break;
+ }
+ }
+ }
+ /* Restore terminal settings. Errors will be dealt with lateron. */
+
+ tp->c_iflag = iflag;
+ tp->c_cc[VMIN] = vmin;
+ (void) ioctl(0, TCSETA, tp);
+}
+
+/* do_prompt - show login prompt, optionally preceded by /etc/issue contents */
+void do_prompt(op, tp)
+struct options *op;
+struct termio *tp;
+{
+#ifdef ISSUE
+ FILE *fd;
+ int oflag;
+ int c;
+ struct utsname uts;
+
+ (void) uname(&uts);
+#endif
+
+ (void) write(1, "\r\n", 2); /* start a new line */
+#ifdef ISSUE /* optional: show /etc/issue */
+ if ((op->flags & F_ISSUE) && (fd = fopen(op->issue, "r"))) {
+ oflag = tp->c_oflag; /* save current setting */
+ tp->c_oflag |= (ONLCR | OPOST); /* map NL in output to CR-NL */
+ (void) ioctl(0, TCSETAW, tp);
+
+
+ while ((c = getc(fd)) != EOF) {
+ if (c == '\\') {
+ c = getc(fd);
+
+ switch (c) {
+ case 's':
+ (void) printf("%s", uts.sysname);
+ break;
+
+ case 'n':
+ (void) printf("%s", uts.nodename);
+ break;
+
+ case 'r':
+ (void) printf("%s", uts.release);
+ break;
+
+ case 'v':
+ (void) printf("%s", uts.version);
+ break;
+
+ case 'm':
+ (void) printf("%s", uts.machine);
+ break;
+
+ case 'o':
+ {
+ char domainname[256];
+
+ getdomainname(domainname, sizeof(domainname));
+ domainname[sizeof(domainname) - 1] = '\0';
+ printf("%s", domainname);
+ }
+ break;
+
+ case 'd':
+ case 't':
+ {
+ char *weekday[] = { "Sun", "Mon", "Tue", "Wed", "Thu",
+ "Fri", "Sat"
+ };
+ char *month[] = { "Jan", "Feb", "Mar", "Apr", "May",
+ "Jun", "Jul", "Aug", "Sep", "Oct",
+ "Nov", "Dec"
+ };
+ time_t now;
+ struct tm *tm;
+
+ (void) time(&now);
+ tm = localtime(&now);
+
+ if (c == 'd')
+ (void) printf("%s %s %d %d",
+ weekday[tm->tm_wday],
+ month[tm->tm_mon], tm->tm_mday,
+ tm->tm_year <
+ 70 ? tm->tm_year +
+ 2000 : tm->tm_year + 1900);
+ else
+ (void) printf("%02d:%02d:%02d", tm->tm_hour,
+ tm->tm_min, tm->tm_sec);
+
+ break;
+ }
+
+ case 'l':
+ (void) printf("%s", op->tty);
+ break;
+
+ case 'b':
+ {
+ int i;
+
+ for (i = 0; speedtab[i].speed; i++) {
+ if (speedtab[i].code == (tp->c_cflag & CBAUD)) {
+ printf("%ld", speedtab[i].speed);
+ break;
+ }
+ }
+ break;
+ }
+ case 'u':
+ case 'U':
+ {
+ int users = 0;
+ struct utmp *ut;
+
+ setutent();
+ while ((ut = getutent()))
+ if (ut->ut_type == USER_PROCESS)
+ users++;
+ endutent();
+ printf("%d ", users);
+ if (c == 'U')
+ printf((users == 1) ? "user" : "users");
+ break;
+ }
+ default:
+ (void) putchar(c);
+ }
+ } else
+ (void) putchar(c);
+ }
+ fflush(stdout);
+
+ tp->c_oflag = oflag; /* restore settings */
+ (void) ioctl(0, TCSETAW, tp); /* wait till output is gone */
+ (void) fclose(fd);
+ }
+#endif
+#ifdef __linux__
+ {
+ char hn[MAXHOSTNAMELEN + 1];
+
+ (void) gethostname(hn, MAXHOSTNAMELEN);
+ write(1, hn, strlen(hn));
+ }
+#endif
+ (void) write(1, LOGIN, sizeof(LOGIN) - 1); /* always show login prompt */
+}
+
+/* next_speed - select next baud rate */
+void next_speed(tp, op)
+struct termio *tp;
+struct options *op;
+{
+ static int baud_index = FIRST_SPEED; /* current speed index */
+
+ baud_index = (baud_index + 1) % op->numspeed;
+ tp->c_cflag &= ~CBAUD;
+ tp->c_cflag |= op->speeds[baud_index];
+ (void) ioctl(0, TCSETA, tp);
+}
+
+/* get_logname - get user name, establish parity, speed, erase, kill, eol */
+/* return NULL on failure, logname on success */
+char *get_logname(op, cp, tp)
+struct options *op;
+struct chardata *cp;
+struct termio *tp;
+{
+ static char logname[BUFSIZ];
+ char *bp;
+ char c; /* input character, full eight bits */
+ char ascval; /* low 7 bits of input character */
+ int bits; /* # of "1" bits per character */
+ int mask; /* mask with 1 bit up */
+ static char *erase[] = { /* backspace-space-backspace */
+ "\010\040\010", /* space parity */
+ "\010\040\010", /* odd parity */
+ "\210\240\210", /* even parity */
+ "\210\240\210", /* no parity */
+ };
+
+ /* Initialize kill, erase, parity etc. (also after switching speeds). */
+
+ *cp = init_chardata;
+
+ /* Flush pending input (esp. after parsing or switching the baud rate). */
+
+ (void) sleep(1);
+ (void) ioctl(0, TCFLSH, TCIFLUSH);
+
+ /* Prompt for and read a login name. */
+
+ for (*logname = 0; *logname == 0; /* void */ ) {
+
+ /* Write issue file and prompt, with "parity" bit == 0. */
+
+ do_prompt(op, tp);
+
+ /* Read name, watch for break, parity, erase, kill, end-of-line. */
+
+ for (bp = logname, cp->eol = 0; cp->eol == 0; /* void */ ) {
+
+ /* Do not report trivial EINTR/EIO errors. */
+
+ if (read(0, &c, 1) < 1) {
+ if (errno == EINTR || errno == EIO)
+ exit(0);
+ error("%s: read: %m", op->tty);
+ }
+ /* Do BREAK handling elsewhere. */
+
+ if ((c == 0) && op->numspeed > 1)
+ /* return (0); */
+ return NULL;
+
+ /* Do parity bit handling. */
+
+ if (c != (ascval = (c & 0177))) { /* "parity" bit on ? */
+ for (bits = 1, mask = 1; mask & 0177; mask <<= 1)
+ if (mask & ascval)
+ bits++; /* count "1" bits */
+ cp->parity |= ((bits & 1) ? 1 : 2);
+ }
+ /* Do erase, kill and end-of-line processing. */
+
+ switch (ascval) {
+ case CR:
+ case NL:
+ *bp = 0; /* terminate logname */
+ cp->eol = ascval; /* set end-of-line char */
+ break;
+ case BS:
+ case DEL:
+ case '#':
+ cp->erase = ascval; /* set erase character */
+ if (bp > logname) {
+ (void) write(1, erase[cp->parity], 3);
+ bp--;
+ }
+ break;
+ case CTL('U'):
+ case '@':
+ cp->kill = ascval; /* set kill character */
+ while (bp > logname) {
+ (void) write(1, erase[cp->parity], 3);
+ bp--;
+ }
+ break;
+ case CTL('D'):
+ exit(0);
+ default:
+ if (!isascii(ascval) || !isprint(ascval)) {
+ /* ignore garbage characters */ ;
+ } else if (bp - logname >= sizeof(logname) - 1) {
+ error("%s: input overrun", op->tty);
+ } else {
+ (void) write(1, &c, 1); /* echo the character */
+ *bp++ = ascval; /* and store it */
+ }
+ break;
+ }
+ }
+ }
+ /* Handle names with upper case and no lower case. */
+
+ if ((cp->capslock = caps_lock(logname))) {
+ for (bp = logname; *bp; bp++)
+ if (isupper(*bp))
+ *bp = tolower(*bp); /* map name to lower case */
+ }
+ return (logname);
+}
+
+/* termio_final - set the final tty mode bits */
+void termio_final(op, tp, cp)
+struct options *op;
+struct termio *tp;
+struct chardata *cp;
+{
+ /* General terminal-independent stuff. */
+
+ tp->c_iflag |= IXON | IXOFF; /* 2-way flow control */
+ tp->c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE;
+ /* no longer| ECHOCTL | ECHOPRT */
+ tp->c_oflag |= OPOST;
+ /* tp->c_cflag = 0; */
+ tp->c_cc[VINTR] = DEF_INTR; /* default interrupt */
+ tp->c_cc[VQUIT] = DEF_QUIT; /* default quit */
+ tp->c_cc[VEOF] = DEF_EOF; /* default EOF character */
+ tp->c_cc[VEOL] = DEF_EOL;
+#ifdef __linux__
+ tp->c_cc[VSWTC] = DEF_SWITCH; /* default switch character */
+#else
+ tp->c_cc[VSWTCH] = DEF_SWITCH; /* default switch character */
+#endif
+
+ /* Account for special characters seen in input. */
+
+ if (cp->eol == CR) {
+ tp->c_iflag |= ICRNL; /* map CR in input to NL */
+ tp->c_oflag |= ONLCR; /* map NL in output to CR-NL */
+ }
+ tp->c_cc[VERASE] = cp->erase; /* set erase character */
+ tp->c_cc[VKILL] = cp->kill; /* set kill character */
+
+ /* Account for the presence or absence of parity bits in input. */
+
+ switch (cp->parity) {
+ case 0: /* space (always 0) parity */
+ break;
+ case 1: /* odd parity */
+ tp->c_cflag |= PARODD;
+ /* FALLTHROUGH */
+ case 2: /* even parity */
+ tp->c_cflag |= PARENB;
+ tp->c_iflag |= INPCK | ISTRIP;
+ /* FALLTHROUGH */
+ case (1 | 2): /* no parity bit */
+ tp->c_cflag &= ~CSIZE;
+ tp->c_cflag |= CS7;
+ break;
+ }
+ /* Account for upper case without lower case. */
+
+ if (cp->capslock) {
+ tp->c_iflag |= IUCLC;
+ tp->c_lflag |= XCASE;
+ tp->c_oflag |= OLCUC;
+ }
+ /* Optionally enable hardware flow control */
+
+#ifdef CRTSCTS
+ if (op->flags & F_RTSCTS)
+ tp->c_cflag |= CRTSCTS;
+#endif
+
+ /* Finally, make the new settings effective */
+
+ if (ioctl(0, TCSETA, tp) < 0)
+ error("%s: ioctl: TCSETA: %m", op->tty);
+}
+
+/* caps_lock - string contains upper case without lower case */
+/* returns 1 if true, 0 if false */
+int caps_lock(s)
+char *s;
+{
+ int capslock;
+
+ for (capslock = 0; *s; s++) {
+ if (islower(*s))
+ return (0);
+ if (capslock == 0)
+ capslock = isupper(*s);
+ }
+ return (capslock);
+}
+
+/* bcode - convert speed string to speed code; return 0 on failure */
+int bcode(s)
+char *s;
+{
+ struct Speedtab *sp;
+ long speed = atol(s);
+
+ for (sp = speedtab; sp->speed; sp++)
+ if (sp->speed == speed)
+ return (sp->code);
+ return (0);
+}
+
+/* error - report errors to console or syslog; only understands %s and %m */
+
+#define str2cpy(b,s1,s2) strcat(strcpy(b,s1),s2)
+
+/*
+ * output error messages
+ */
+static void error(const char *fmt, ...)
+{
+ va_list va_alist;
+ char buf[256], *bp;
+
+#ifndef USE_SYSLOG
+ int fd;
+#endif
+
+#ifdef USE_SYSLOG
+ buf[0] = '\0';
+ bp = buf;
+#else
+ strncpy(buf, progname, 256);
+ strncat(buf, ": ", 256);
+ buf[255] = 0;
+ bp = buf + strlen(buf);
+#endif
+
+ va_start(va_alist, fmt);
+ vsnprintf(bp, 256 - strlen(buf), fmt, va_alist);
+ buf[255] = 0;
+ va_end(va_alist);
+
+#ifdef USE_SYSLOG
+ openlog(progname, LOG_PID, LOG_AUTH);
+ syslog(LOG_ERR, buf);
+ closelog();
+#else
+ strncat(bp, "\r\n", 256 - strlen(buf));
+ buf[255] = 0;
+ if ((fd = open("/dev/console", 1)) >= 0) {
+ write(fd, buf, strlen(buf));
+ close(fd);
+ }
+#endif
+ (void) sleep((unsigned) 10); /* be kind to init(8) */
+ exit(1);
+}