Trailing whitespace removal over entire tree
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index b0d067b..a7fb4d5 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -99,7 +99,7 @@
objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
###
-# if_changed - execute command if any prerequisite is newer than
+# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
# including used config symbols
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index e48e60d..ddefea5 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -216,7 +216,7 @@
$(real-objs-m:.o=.s): modkern_aflags := $(AFLAGS_MODULE)
quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
-cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
+cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
%.s: %.S FORCE
$(call if_changed_dep,as_s_S)
@@ -284,7 +284,7 @@
$(filter $(addprefix $(obj)/, \
$($(subst $(obj)/,,$(@:.o=-objs))) \
$($(subst $(obj)/,,$(@:.o=-y)))), $^)
-
+
quiet_cmd_link_multi-y = LD $@
cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps)
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 2d51970..763e2f2 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -152,5 +152,5 @@
$(call if_changed,host-cshlib)
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
- $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
+ $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 2cb4935..e1e0ba4 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -18,7 +18,7 @@
# ---------------------------------------------------------------------------
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
# and add the directory to the list of dirs to descend into: $(subdir-y)
-# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
+# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
# and add the directory to the list of dirs to descend into: $(subdir-m)
__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
@@ -32,7 +32,7 @@
subdir-ym := $(sort $(subdir-y) $(subdir-m))
-# if $(foo-objs) exists, foo.o is a composite object
+# if $(foo-objs) exists, foo.o is a composite object
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used := $(multi-used-y) $(multi-used-m)
@@ -76,7 +76,7 @@
# These flags are needed for modversions and compiling, so we define them here
# already
-# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
+# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
# end up in (or would, if it gets compiled in)
# Note: It's possible that one object gets potentially linked into more
# than one module. In that case KBUILD_MODNAME will be set to foo_bar,
@@ -134,7 +134,7 @@
# Commands useful for building a boot image
# ===========================================================================
-#
+#
# Use as following:
#
# target: source(s) FORCE
@@ -148,7 +148,7 @@
quiet_cmd_ld = LD $@
cmd_ld = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) \
- $(filter-out FORCE,$^) -o $@
+ $(filter-out FORCE,$^) -o $@
# Objcopy
# ---------------------------------------------------------------------------
diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped
index 24e3c8c..7a4ca2c 100644
--- a/scripts/kconfig/lex.zconf.c_shipped
+++ b/scripts/kconfig/lex.zconf.c_shipped
@@ -42,7 +42,7 @@
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
+typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
#endif /* ! C99 */
@@ -148,7 +148,7 @@
#define EOB_ACT_LAST_MATCH 2
#define YY_LESS_LINENO(n)
-
+
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
do \
@@ -215,7 +215,7 @@
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
-
+
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
@@ -833,7 +833,7 @@
#endif
static void yyunput (int c,char *buf_ptr );
-
+
#ifndef yytext_ptr
static void yy_flex_strncpy (char *,yyconst char *,int );
#endif
@@ -938,7 +938,7 @@
register yy_state_type yy_current_state;
register char *yy_cp, *yy_bp;
register int yy_act;
-
+
int str = 0;
int ts, i;
@@ -1536,7 +1536,7 @@
{
register yy_state_type yy_current_state;
register char *yy_cp;
-
+
yy_current_state = (yy_start);
for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
@@ -1555,7 +1555,7 @@
static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
{
register int yy_is_jam;
-
+
yy_current_state = yy_nxt[yy_current_state][1];
yy_is_jam = (yy_current_state <= 0);
@@ -1565,7 +1565,7 @@
static void yyunput (int c, register char * yy_bp )
{
register char *yy_cp;
-
+
yy_cp = (yy_c_buf_p);
/* undo effects of setting up zconftext */
@@ -1608,7 +1608,7 @@
{
int c;
-
+
*(yy_c_buf_p) = (yy_hold_char);
if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
@@ -1675,12 +1675,12 @@
/** Immediately switch to a different input stream.
* @param input_file A readable stream.
- *
+ *
* @note This function does not reset the start condition to @c INITIAL .
*/
void zconfrestart (FILE * input_file )
{
-
+
if ( ! YY_CURRENT_BUFFER ){
zconfensure_buffer_stack ();
YY_CURRENT_BUFFER_LVALUE =
@@ -1693,11 +1693,11 @@
/** Switch to a different input buffer.
* @param new_buffer The new input buffer.
- *
+ *
*/
void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer )
{
-
+
/* TODO. We should be able to replace this entire function body
* with
* zconfpop_buffer_state();
@@ -1737,13 +1737,13 @@
/** Allocate and initialize an input buffer state.
* @param file A readable stream.
* @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
+ *
* @return the allocated buffer state.
*/
YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size )
{
YY_BUFFER_STATE b;
-
+
b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
@@ -1766,11 +1766,11 @@
/** Destroy the buffer.
* @param b a buffer created with zconf_create_buffer()
- *
+ *
*/
void zconf_delete_buffer (YY_BUFFER_STATE b )
{
-
+
if ( ! b )
return;
@@ -1791,7 +1791,7 @@
{
int oerrno = errno;
-
+
zconf_flush_buffer(b );
b->yy_input_file = file;
@@ -1807,13 +1807,13 @@
}
b->yy_is_interactive = 0;
-
+
errno = oerrno;
}
/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
* @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
+ *
*/
void zconf_flush_buffer (YY_BUFFER_STATE b )
{
@@ -1842,7 +1842,7 @@
* the current state. This function will allocate the stack
* if necessary.
* @param new_buffer The new state.
- *
+ *
*/
void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer )
{
@@ -1872,7 +1872,7 @@
/** Removes and deletes the top of the stack, if present.
* The next element becomes the new top.
- *
+ *
*/
void zconfpop_buffer_state (void)
{
@@ -1896,7 +1896,7 @@
static void zconfensure_buffer_stack (void)
{
int num_to_alloc;
-
+
if (!(yy_buffer_stack)) {
/* First allocation is just for 2 elements, since we don't know if this
@@ -1907,9 +1907,9 @@
(yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
(num_to_alloc * sizeof(struct yy_buffer_state*)
);
-
+
memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
+
(yy_buffer_stack_max) = num_to_alloc;
(yy_buffer_stack_top) = 0;
return;
@@ -1935,13 +1935,13 @@
/** Setup the input buffer state to scan directly from a user-specified character buffer.
* @param base the character buffer
* @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
+ *
+ * @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size )
{
YY_BUFFER_STATE b;
-
+
if ( size < 2 ||
base[size-2] != YY_END_OF_BUFFER_CHAR ||
base[size-1] != YY_END_OF_BUFFER_CHAR )
@@ -1970,14 +1970,14 @@
/** Setup the input buffer state to scan a string. The next call to zconflex() will
* scan from a @e copy of @a str.
* @param yy_str a NUL-terminated string to scan
- *
+ *
* @return the newly allocated buffer state object.
* @note If you want to scan bytes that may contain NUL values, then use
* zconf_scan_bytes() instead.
*/
YY_BUFFER_STATE zconf_scan_string (yyconst char * yy_str )
{
-
+
return zconf_scan_bytes(yy_str,strlen(yy_str) );
}
@@ -1985,7 +1985,7 @@
* scan from a @e copy of @a bytes.
* @param bytes the byte buffer to scan
* @param len the number of bytes in the buffer pointed to by @a bytes.
- *
+ *
* @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE zconf_scan_bytes (yyconst char * bytes, int len )
@@ -1994,7 +1994,7 @@
char *buf;
yy_size_t n;
int i;
-
+
/* Get memory for full buffer, including space for trailing EOB's. */
n = len + 2;
buf = (char *) zconfalloc(n );
@@ -2048,16 +2048,16 @@
/* Accessor methods (get/set functions) to struct members. */
/** Get the current line number.
- *
+ *
*/
int zconfget_lineno (void)
{
-
+
return zconflineno;
}
/** Get the input stream.
- *
+ *
*/
FILE *zconfget_in (void)
{
@@ -2065,7 +2065,7 @@
}
/** Get the output stream.
- *
+ *
*/
FILE *zconfget_out (void)
{
@@ -2073,7 +2073,7 @@
}
/** Get the length of the current token.
- *
+ *
*/
int zconfget_leng (void)
{
@@ -2081,7 +2081,7 @@
}
/** Get the current token.
- *
+ *
*/
char *zconfget_text (void)
@@ -2091,18 +2091,18 @@
/** Set the current line number.
* @param line_number
- *
+ *
*/
void zconfset_lineno (int line_number )
{
-
+
zconflineno = line_number;
}
/** Set the input stream. This does not discard the current
* input buffer.
* @param in_str A readable stream.
- *
+ *
* @see zconf_switch_to_buffer
*/
void zconfset_in (FILE * in_str )
@@ -2128,7 +2128,7 @@
/* zconflex_destroy is for both reentrant and non-reentrant scanners. */
int zconflex_destroy (void)
{
-
+
/* Pop the buffer stack, destroying each element. */
while(YY_CURRENT_BUFFER){
zconf_delete_buffer(YY_CURRENT_BUFFER );
diff --git a/scripts/kconfig/lxdialog/BIG.FAT.WARNING b/scripts/kconfig/lxdialog/BIG.FAT.WARNING
index c9bfbb9..b5d3b10 100644
--- a/scripts/kconfig/lxdialog/BIG.FAT.WARNING
+++ b/scripts/kconfig/lxdialog/BIG.FAT.WARNING
@@ -1,4 +1,4 @@
This is NOT the official version of dialog. This version has been
significantly modified from the original. It is for use by the Linux
-busybox configuration script. Please do not bother Savio Lam with
+busybox configuration script. Please do not bother Savio Lam with
questions about this program.
diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c
index bf8052f..078e55a 100644
--- a/scripts/kconfig/lxdialog/menubox.c
+++ b/scripts/kconfig/lxdialog/menubox.c
@@ -26,7 +26,7 @@
*
* *) A bugfix for the Page-Down problem
*
- * *) Formerly when I used Page Down and Page Up, the cursor would be set
+ * *) Formerly when I used Page Down and Page Up, the cursor would be set
* to the first position in the menu box. Now lxdialog is a bit
* smarter and works more like other menu systems (just have a look at
* it).
diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped
index e14eafa..ca8003d 100644
--- a/scripts/kconfig/zconf.tab.c_shipped
+++ b/scripts/kconfig/zconf.tab.c_shipped
@@ -1086,7 +1086,7 @@
#endif
#endif
{
-
+
register int yystate;
register int yyn;
int yyresult;