Updating Opus to release 1.1
opus-1.1.tar.gz downloaded from http://www.opus-codec.org/
R=sergeyu@chromium.org
Review URL: https://codereview.chromium.org/107243004
git-svn-id: svn://svn.chromium.org/chrome/trunk/deps/third_party/opus@239448 0039d316-1c4b-4281-b951-d872f2087c98
diff --git a/celt/arm/celt_pitch_xcorr_arm.s b/celt/arm/celt_pitch_xcorr_arm.s
new file mode 100644
index 0000000..09917b1
--- /dev/null
+++ b/celt/arm/celt_pitch_xcorr_arm.s
@@ -0,0 +1,545 @@
+; Copyright (c) 2007-2008 CSIRO
+; Copyright (c) 2007-2009 Xiph.Org Foundation
+; Copyright (c) 2013 Parrot
+; Written by Aurélien Zanelli
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions
+; are met:
+;
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+;
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+; ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+; OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+; EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+; PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+; LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+; NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ AREA |.text|, CODE, READONLY
+
+ GET celt/arm/armopts.s
+
+IF OPUS_ARM_MAY_HAVE_EDSP
+ EXPORT celt_pitch_xcorr_edsp
+ENDIF
+
+IF OPUS_ARM_MAY_HAVE_NEON
+ EXPORT celt_pitch_xcorr_neon
+ENDIF
+
+IF OPUS_ARM_MAY_HAVE_NEON
+
+; Compute sum[k]=sum(x[j]*y[j+k],j=0...len-1), k=0...3
+xcorr_kernel_neon PROC
+ ; input:
+ ; r3 = int len
+ ; r4 = opus_val16 *x
+ ; r5 = opus_val16 *y
+ ; q0 = opus_val32 sum[4]
+ ; output:
+ ; q0 = opus_val32 sum[4]
+ ; preserved: r0-r3, r6-r11, d2, q4-q7, q9-q15
+ ; internal usage:
+ ; r12 = int j
+ ; d3 = y_3|y_2|y_1|y_0
+ ; q2 = y_B|y_A|y_9|y_8|y_7|y_6|y_5|y_4
+ ; q3 = x_7|x_6|x_5|x_4|x_3|x_2|x_1|x_0
+ ; q8 = scratch
+ ;
+ ; Load y[0...3]
+ ; This requires len>0 to always be valid (which we assert in the C code).
+ VLD1.16 {d5}, [r5]!
+ SUBS r12, r3, #8
+ BLE xcorr_kernel_neon_process4
+; Process 8 samples at a time.
+; This loop loads one y value more than we actually need. Therefore we have to
+; stop as soon as there are 8 or fewer samples left (instead of 7), to avoid
+; reading past the end of the array.
+xcorr_kernel_neon_process8
+ ; This loop has 19 total instructions (10 cycles to issue, minimum), with
+ ; - 2 cycles of ARM insrtuctions,
+ ; - 10 cycles of load/store/byte permute instructions, and
+ ; - 9 cycles of data processing instructions.
+ ; On a Cortex A8, we dual-issue the maximum amount (9 cycles) between the
+ ; latter two categories, meaning the whole loop should run in 10 cycles per
+ ; iteration, barring cache misses.
+ ;
+ ; Load x[0...7]
+ VLD1.16 {d6, d7}, [r4]!
+ ; Unlike VMOV, VAND is a data processsing instruction (and doesn't get
+ ; assembled to VMOV, like VORR would), so it dual-issues with the prior VLD1.
+ VAND d3, d5, d5
+ SUBS r12, r12, #8
+ ; Load y[4...11]
+ VLD1.16 {d4, d5}, [r5]!
+ VMLAL.S16 q0, d3, d6[0]
+ VEXT.16 d16, d3, d4, #1
+ VMLAL.S16 q0, d4, d7[0]
+ VEXT.16 d17, d4, d5, #1
+ VMLAL.S16 q0, d16, d6[1]
+ VEXT.16 d16, d3, d4, #2
+ VMLAL.S16 q0, d17, d7[1]
+ VEXT.16 d17, d4, d5, #2
+ VMLAL.S16 q0, d16, d6[2]
+ VEXT.16 d16, d3, d4, #3
+ VMLAL.S16 q0, d17, d7[2]
+ VEXT.16 d17, d4, d5, #3
+ VMLAL.S16 q0, d16, d6[3]
+ VMLAL.S16 q0, d17, d7[3]
+ BGT xcorr_kernel_neon_process8
+; Process 4 samples here if we have > 4 left (still reading one extra y value).
+xcorr_kernel_neon_process4
+ ADDS r12, r12, #4
+ BLE xcorr_kernel_neon_process2
+ ; Load x[0...3]
+ VLD1.16 d6, [r4]!
+ ; Use VAND since it's a data processing instruction again.
+ VAND d4, d5, d5
+ SUB r12, r12, #4
+ ; Load y[4...7]
+ VLD1.16 d5, [r5]!
+ VMLAL.S16 q0, d4, d6[0]
+ VEXT.16 d16, d4, d5, #1
+ VMLAL.S16 q0, d16, d6[1]
+ VEXT.16 d16, d4, d5, #2
+ VMLAL.S16 q0, d16, d6[2]
+ VEXT.16 d16, d4, d5, #3
+ VMLAL.S16 q0, d16, d6[3]
+; Process 2 samples here if we have > 2 left (still reading one extra y value).
+xcorr_kernel_neon_process2
+ ADDS r12, r12, #2
+ BLE xcorr_kernel_neon_process1
+ ; Load x[0...1]
+ VLD2.16 {d6[],d7[]}, [r4]!
+ ; Use VAND since it's a data processing instruction again.
+ VAND d4, d5, d5
+ SUB r12, r12, #2
+ ; Load y[4...5]
+ VLD1.32 {d5[]}, [r5]!
+ VMLAL.S16 q0, d4, d6
+ VEXT.16 d16, d4, d5, #1
+ ; Replace bottom copy of {y5,y4} in d5 with {y3,y2} from d4, using VSRI
+ ; instead of VEXT, since it's a data-processing instruction.
+ VSRI.64 d5, d4, #32
+ VMLAL.S16 q0, d16, d7
+; Process 1 sample using the extra y value we loaded above.
+xcorr_kernel_neon_process1
+ ; Load next *x
+ VLD1.16 {d6[]}, [r4]!
+ ADDS r12, r12, #1
+ ; y[0...3] are left in d5 from prior iteration(s) (if any)
+ VMLAL.S16 q0, d5, d6
+ MOVLE pc, lr
+; Now process 1 last sample, not reading ahead.
+ ; Load last *y
+ VLD1.16 {d4[]}, [r5]!
+ VSRI.64 d4, d5, #16
+ ; Load last *x
+ VLD1.16 {d6[]}, [r4]!
+ VMLAL.S16 q0, d4, d6
+ MOV pc, lr
+ ENDP
+
+; opus_val32 celt_pitch_xcorr_neon(opus_val16 *_x, opus_val16 *_y,
+; opus_val32 *xcorr, int len, int max_pitch)
+celt_pitch_xcorr_neon PROC
+ ; input:
+ ; r0 = opus_val16 *_x
+ ; r1 = opus_val16 *_y
+ ; r2 = opus_val32 *xcorr
+ ; r3 = int len
+ ; output:
+ ; r0 = int maxcorr
+ ; internal usage:
+ ; r4 = opus_val16 *x (for xcorr_kernel_neon())
+ ; r5 = opus_val16 *y (for xcorr_kernel_neon())
+ ; r6 = int max_pitch
+ ; r12 = int j
+ ; q15 = int maxcorr[4] (q15 is not used by xcorr_kernel_neon())
+ STMFD sp!, {r4-r6, lr}
+ LDR r6, [sp, #16]
+ VMOV.S32 q15, #1
+ ; if (max_pitch < 4) goto celt_pitch_xcorr_neon_process4_done
+ SUBS r6, r6, #4
+ BLT celt_pitch_xcorr_neon_process4_done
+celt_pitch_xcorr_neon_process4
+ ; xcorr_kernel_neon parameters:
+ ; r3 = len, r4 = _x, r5 = _y, q0 = {0, 0, 0, 0}
+ MOV r4, r0
+ MOV r5, r1
+ VEOR q0, q0, q0
+ ; xcorr_kernel_neon only modifies r4, r5, r12, and q0...q3.
+ ; So we don't save/restore any other registers.
+ BL xcorr_kernel_neon
+ SUBS r6, r6, #4
+ VST1.32 {q0}, [r2]!
+ ; _y += 4
+ ADD r1, r1, #8
+ VMAX.S32 q15, q15, q0
+ ; if (max_pitch < 4) goto celt_pitch_xcorr_neon_process4_done
+ BGE celt_pitch_xcorr_neon_process4
+; We have less than 4 sums left to compute.
+celt_pitch_xcorr_neon_process4_done
+ ADDS r6, r6, #4
+ ; Reduce maxcorr to a single value
+ VMAX.S32 d30, d30, d31
+ VPMAX.S32 d30, d30, d30
+ ; if (max_pitch <= 0) goto celt_pitch_xcorr_neon_done
+ BLE celt_pitch_xcorr_neon_done
+; Now compute each remaining sum one at a time.
+celt_pitch_xcorr_neon_process_remaining
+ MOV r4, r0
+ MOV r5, r1
+ VMOV.I32 q0, #0
+ SUBS r12, r3, #8
+ BLT celt_pitch_xcorr_neon_process_remaining4
+; Sum terms 8 at a time.
+celt_pitch_xcorr_neon_process_remaining_loop8
+ ; Load x[0...7]
+ VLD1.16 {q1}, [r4]!
+ ; Load y[0...7]
+ VLD1.16 {q2}, [r5]!
+ SUBS r12, r12, #8
+ VMLAL.S16 q0, d4, d2
+ VMLAL.S16 q0, d5, d3
+ BGE celt_pitch_xcorr_neon_process_remaining_loop8
+; Sum terms 4 at a time.
+celt_pitch_xcorr_neon_process_remaining4
+ ADDS r12, r12, #4
+ BLT celt_pitch_xcorr_neon_process_remaining4_done
+ ; Load x[0...3]
+ VLD1.16 {d2}, [r4]!
+ ; Load y[0...3]
+ VLD1.16 {d3}, [r5]!
+ SUB r12, r12, #4
+ VMLAL.S16 q0, d3, d2
+celt_pitch_xcorr_neon_process_remaining4_done
+ ; Reduce the sum to a single value.
+ VADD.S32 d0, d0, d1
+ VPADDL.S32 d0, d0
+ ADDS r12, r12, #4
+ BLE celt_pitch_xcorr_neon_process_remaining_loop_done
+; Sum terms 1 at a time.
+celt_pitch_xcorr_neon_process_remaining_loop1
+ VLD1.16 {d2[]}, [r4]!
+ VLD1.16 {d3[]}, [r5]!
+ SUBS r12, r12, #1
+ VMLAL.S16 q0, d2, d3
+ BGT celt_pitch_xcorr_neon_process_remaining_loop1
+celt_pitch_xcorr_neon_process_remaining_loop_done
+ VST1.32 {d0[0]}, [r2]!
+ VMAX.S32 d30, d30, d0
+ SUBS r6, r6, #1
+ ; _y++
+ ADD r1, r1, #2
+ ; if (--max_pitch > 0) goto celt_pitch_xcorr_neon_process_remaining
+ BGT celt_pitch_xcorr_neon_process_remaining
+celt_pitch_xcorr_neon_done
+ VMOV.32 r0, d30[0]
+ LDMFD sp!, {r4-r6, pc}
+ ENDP
+
+ENDIF
+
+IF OPUS_ARM_MAY_HAVE_EDSP
+
+; This will get used on ARMv7 devices without NEON, so it has been optimized
+; to take advantage of dual-issuing where possible.
+xcorr_kernel_edsp PROC
+ ; input:
+ ; r3 = int len
+ ; r4 = opus_val16 *_x (must be 32-bit aligned)
+ ; r5 = opus_val16 *_y (must be 32-bit aligned)
+ ; r6...r9 = opus_val32 sum[4]
+ ; output:
+ ; r6...r9 = opus_val32 sum[4]
+ ; preserved: r0-r5
+ ; internal usage
+ ; r2 = int j
+ ; r12,r14 = opus_val16 x[4]
+ ; r10,r11 = opus_val16 y[4]
+ STMFD sp!, {r2,r4,r5,lr}
+ LDR r10, [r5], #4 ; Load y[0...1]
+ SUBS r2, r3, #4 ; j = len-4
+ LDR r11, [r5], #4 ; Load y[2...3]
+ BLE xcorr_kernel_edsp_process4_done
+ LDR r12, [r4], #4 ; Load x[0...1]
+ ; Stall
+xcorr_kernel_edsp_process4
+ ; The multiplies must issue from pipeline 0, and can't dual-issue with each
+ ; other. Every other instruction here dual-issues with a multiply, and is
+ ; thus "free". There should be no stalls in the body of the loop.
+ SMLABB r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x_0,y_0)
+ LDR r14, [r4], #4 ; Load x[2...3]
+ SMLABT r7, r12, r10, r7 ; sum[1] = MAC16_16(sum[1],x_0,y_1)
+ SUBS r2, r2, #4 ; j-=4
+ SMLABB r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x_0,y_2)
+ SMLABT r9, r12, r11, r9 ; sum[3] = MAC16_16(sum[3],x_0,y_3)
+ SMLATT r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x_1,y_1)
+ LDR r10, [r5], #4 ; Load y[4...5]
+ SMLATB r7, r12, r11, r7 ; sum[1] = MAC16_16(sum[1],x_1,y_2)
+ SMLATT r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x_1,y_3)
+ SMLATB r9, r12, r10, r9 ; sum[3] = MAC16_16(sum[3],x_1,y_4)
+ LDRGT r12, [r4], #4 ; Load x[0...1]
+ SMLABB r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],x_2,y_2)
+ SMLABT r7, r14, r11, r7 ; sum[1] = MAC16_16(sum[1],x_2,y_3)
+ SMLABB r8, r14, r10, r8 ; sum[2] = MAC16_16(sum[2],x_2,y_4)
+ SMLABT r9, r14, r10, r9 ; sum[3] = MAC16_16(sum[3],x_2,y_5)
+ SMLATT r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],x_3,y_3)
+ LDR r11, [r5], #4 ; Load y[6...7]
+ SMLATB r7, r14, r10, r7 ; sum[1] = MAC16_16(sum[1],x_3,y_4)
+ SMLATT r8, r14, r10, r8 ; sum[2] = MAC16_16(sum[2],x_3,y_5)
+ SMLATB r9, r14, r11, r9 ; sum[3] = MAC16_16(sum[3],x_3,y_6)
+ BGT xcorr_kernel_edsp_process4
+xcorr_kernel_edsp_process4_done
+ ADDS r2, r2, #4
+ BLE xcorr_kernel_edsp_done
+ LDRH r12, [r4], #2 ; r12 = *x++
+ SUBS r2, r2, #1 ; j--
+ ; Stall
+ SMLABB r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x,y_0)
+ LDRGTH r14, [r4], #2 ; r14 = *x++
+ SMLABT r7, r12, r10, r7 ; sum[1] = MAC16_16(sum[1],x,y_1)
+ SMLABB r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x,y_2)
+ SMLABT r9, r12, r11, r9 ; sum[3] = MAC16_16(sum[3],x,y_3)
+ BLE xcorr_kernel_edsp_done
+ SMLABT r6, r14, r10, r6 ; sum[0] = MAC16_16(sum[0],x,y_1)
+ SUBS r2, r2, #1 ; j--
+ SMLABB r7, r14, r11, r7 ; sum[1] = MAC16_16(sum[1],x,y_2)
+ LDRH r10, [r5], #2 ; r10 = y_4 = *y++
+ SMLABT r8, r14, r11, r8 ; sum[2] = MAC16_16(sum[2],x,y_3)
+ LDRGTH r12, [r4], #2 ; r12 = *x++
+ SMLABB r9, r14, r10, r9 ; sum[3] = MAC16_16(sum[3],x,y_4)
+ BLE xcorr_kernel_edsp_done
+ SMLABB r6, r12, r11, r6 ; sum[0] = MAC16_16(sum[0],tmp,y_2)
+ CMP r2, #1 ; j--
+ SMLABT r7, r12, r11, r7 ; sum[1] = MAC16_16(sum[1],tmp,y_3)
+ LDRH r2, [r5], #2 ; r2 = y_5 = *y++
+ SMLABB r8, r12, r10, r8 ; sum[2] = MAC16_16(sum[2],tmp,y_4)
+ LDRGTH r14, [r4] ; r14 = *x
+ SMLABB r9, r12, r2, r9 ; sum[3] = MAC16_16(sum[3],tmp,y_5)
+ BLE xcorr_kernel_edsp_done
+ SMLABT r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],tmp,y_3)
+ LDRH r11, [r5] ; r11 = y_6 = *y
+ SMLABB r7, r14, r10, r7 ; sum[1] = MAC16_16(sum[1],tmp,y_4)
+ SMLABB r8, r14, r2, r8 ; sum[2] = MAC16_16(sum[2],tmp,y_5)
+ SMLABB r9, r14, r11, r9 ; sum[3] = MAC16_16(sum[3],tmp,y_6)
+xcorr_kernel_edsp_done
+ LDMFD sp!, {r2,r4,r5,pc}
+ ENDP
+
+celt_pitch_xcorr_edsp PROC
+ ; input:
+ ; r0 = opus_val16 *_x (must be 32-bit aligned)
+ ; r1 = opus_val16 *_y (only needs to be 16-bit aligned)
+ ; r2 = opus_val32 *xcorr
+ ; r3 = int len
+ ; output:
+ ; r0 = maxcorr
+ ; internal usage
+ ; r4 = opus_val16 *x
+ ; r5 = opus_val16 *y
+ ; r6 = opus_val32 sum0
+ ; r7 = opus_val32 sum1
+ ; r8 = opus_val32 sum2
+ ; r9 = opus_val32 sum3
+ ; r1 = int max_pitch
+ ; r12 = int j
+ STMFD sp!, {r4-r11, lr}
+ MOV r5, r1
+ LDR r1, [sp, #36]
+ MOV r4, r0
+ TST r5, #3
+ ; maxcorr = 1
+ MOV r0, #1
+ BEQ celt_pitch_xcorr_edsp_process1u_done
+; Compute one sum at the start to make y 32-bit aligned.
+ SUBS r12, r3, #4
+ ; r14 = sum = 0
+ MOV r14, #0
+ LDRH r8, [r5], #2
+ BLE celt_pitch_xcorr_edsp_process1u_loop4_done
+ LDR r6, [r4], #4
+ MOV r8, r8, LSL #16
+celt_pitch_xcorr_edsp_process1u_loop4
+ LDR r9, [r5], #4
+ SMLABT r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
+ LDR r7, [r4], #4
+ SMLATB r14, r6, r9, r14 ; sum = MAC16_16(sum, x_1, y_1)
+ LDR r8, [r5], #4
+ SMLABT r14, r7, r9, r14 ; sum = MAC16_16(sum, x_2, y_2)
+ SUBS r12, r12, #4 ; j-=4
+ SMLATB r14, r7, r8, r14 ; sum = MAC16_16(sum, x_3, y_3)
+ LDRGT r6, [r4], #4
+ BGT celt_pitch_xcorr_edsp_process1u_loop4
+ MOV r8, r8, LSR #16
+celt_pitch_xcorr_edsp_process1u_loop4_done
+ ADDS r12, r12, #4
+celt_pitch_xcorr_edsp_process1u_loop1
+ LDRGEH r6, [r4], #2
+ ; Stall
+ SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, *x, *y)
+ SUBGES r12, r12, #1
+ LDRGTH r8, [r5], #2
+ BGT celt_pitch_xcorr_edsp_process1u_loop1
+ ; Restore _x
+ SUB r4, r4, r3, LSL #1
+ ; Restore and advance _y
+ SUB r5, r5, r3, LSL #1
+ ; maxcorr = max(maxcorr, sum)
+ CMP r0, r14
+ ADD r5, r5, #2
+ MOVLT r0, r14
+ SUBS r1, r1, #1
+ ; xcorr[i] = sum
+ STR r14, [r2], #4
+ BLE celt_pitch_xcorr_edsp_done
+celt_pitch_xcorr_edsp_process1u_done
+ ; if (max_pitch < 4) goto celt_pitch_xcorr_edsp_process2
+ SUBS r1, r1, #4
+ BLT celt_pitch_xcorr_edsp_process2
+celt_pitch_xcorr_edsp_process4
+ ; xcorr_kernel_edsp parameters:
+ ; r3 = len, r4 = _x, r5 = _y, r6...r9 = sum[4] = {0, 0, 0, 0}
+ MOV r6, #0
+ MOV r7, #0
+ MOV r8, #0
+ MOV r9, #0
+ BL xcorr_kernel_edsp ; xcorr_kernel_edsp(_x, _y+i, xcorr+i, len)
+ ; maxcorr = max(maxcorr, sum0, sum1, sum2, sum3)
+ CMP r0, r6
+ ; _y+=4
+ ADD r5, r5, #8
+ MOVLT r0, r6
+ CMP r0, r7
+ MOVLT r0, r7
+ CMP r0, r8
+ MOVLT r0, r8
+ CMP r0, r9
+ MOVLT r0, r9
+ STMIA r2!, {r6-r9}
+ SUBS r1, r1, #4
+ BGE celt_pitch_xcorr_edsp_process4
+celt_pitch_xcorr_edsp_process2
+ ADDS r1, r1, #2
+ BLT celt_pitch_xcorr_edsp_process1a
+ SUBS r12, r3, #4
+ ; {r10, r11} = {sum0, sum1} = {0, 0}
+ MOV r10, #0
+ MOV r11, #0
+ LDR r8, [r5], #4
+ BLE celt_pitch_xcorr_edsp_process2_loop_done
+ LDR r6, [r4], #4
+ LDR r9, [r5], #4
+celt_pitch_xcorr_edsp_process2_loop4
+ SMLABB r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_0)
+ LDR r7, [r4], #4
+ SMLABT r11, r6, r8, r11 ; sum1 = MAC16_16(sum1, x_0, y_1)
+ SUBS r12, r12, #4 ; j-=4
+ SMLATT r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_1, y_1)
+ LDR r8, [r5], #4
+ SMLATB r11, r6, r9, r11 ; sum1 = MAC16_16(sum1, x_1, y_2)
+ LDRGT r6, [r4], #4
+ SMLABB r10, r7, r9, r10 ; sum0 = MAC16_16(sum0, x_2, y_2)
+ SMLABT r11, r7, r9, r11 ; sum1 = MAC16_16(sum1, x_2, y_3)
+ SMLATT r10, r7, r9, r10 ; sum0 = MAC16_16(sum0, x_3, y_3)
+ LDRGT r9, [r5], #4
+ SMLATB r11, r7, r8, r11 ; sum1 = MAC16_16(sum1, x_3, y_4)
+ BGT celt_pitch_xcorr_edsp_process2_loop4
+celt_pitch_xcorr_edsp_process2_loop_done
+ ADDS r12, r12, #2
+ BLE celt_pitch_xcorr_edsp_process2_1
+ LDR r6, [r4], #4
+ ; Stall
+ SMLABB r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_0)
+ LDR r9, [r5], #4
+ SMLABT r11, r6, r8, r11 ; sum1 = MAC16_16(sum1, x_0, y_1)
+ SUB r12, r12, #2
+ SMLATT r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_1, y_1)
+ MOV r8, r9
+ SMLATB r11, r6, r9, r11 ; sum1 = MAC16_16(sum1, x_1, y_2)
+celt_pitch_xcorr_edsp_process2_1
+ LDRH r6, [r4], #2
+ ADDS r12, r12, #1
+ ; Stall
+ SMLABB r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_0)
+ LDRGTH r7, [r4], #2
+ SMLABT r11, r6, r8, r11 ; sum1 = MAC16_16(sum1, x_0, y_1)
+ BLE celt_pitch_xcorr_edsp_process2_done
+ LDRH r9, [r5], #2
+ SMLABT r10, r7, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_1)
+ SMLABB r11, r7, r9, r11 ; sum1 = MAC16_16(sum1, x_0, y_2)
+celt_pitch_xcorr_edsp_process2_done
+ ; Restore _x
+ SUB r4, r4, r3, LSL #1
+ ; Restore and advance _y
+ SUB r5, r5, r3, LSL #1
+ ; maxcorr = max(maxcorr, sum0)
+ CMP r0, r10
+ ADD r5, r5, #2
+ MOVLT r0, r10
+ SUB r1, r1, #2
+ ; maxcorr = max(maxcorr, sum1)
+ CMP r0, r11
+ ; xcorr[i] = sum
+ STR r10, [r2], #4
+ MOVLT r0, r11
+ STR r11, [r2], #4
+celt_pitch_xcorr_edsp_process1a
+ ADDS r1, r1, #1
+ BLT celt_pitch_xcorr_edsp_done
+ SUBS r12, r3, #4
+ ; r14 = sum = 0
+ MOV r14, #0
+ BLT celt_pitch_xcorr_edsp_process1a_loop_done
+ LDR r6, [r4], #4
+ LDR r8, [r5], #4
+ LDR r7, [r4], #4
+ LDR r9, [r5], #4
+celt_pitch_xcorr_edsp_process1a_loop4
+ SMLABB r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
+ SUBS r12, r12, #4 ; j-=4
+ SMLATT r14, r6, r8, r14 ; sum = MAC16_16(sum, x_1, y_1)
+ LDRGE r6, [r4], #4
+ SMLABB r14, r7, r9, r14 ; sum = MAC16_16(sum, x_2, y_2)
+ LDRGE r8, [r5], #4
+ SMLATT r14, r7, r9, r14 ; sum = MAC16_16(sum, x_3, y_3)
+ LDRGE r7, [r4], #4
+ LDRGE r9, [r5], #4
+ BGE celt_pitch_xcorr_edsp_process1a_loop4
+celt_pitch_xcorr_edsp_process1a_loop_done
+ ADDS r12, r12, #2
+ LDRGE r6, [r4], #4
+ LDRGE r8, [r5], #4
+ ; Stall
+ SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
+ SUBGE r12, r12, #2
+ SMLATTGE r14, r6, r8, r14 ; sum = MAC16_16(sum, x_1, y_1)
+ ADDS r12, r12, #1
+ LDRGEH r6, [r4], #2
+ LDRGEH r8, [r5], #2
+ ; Stall
+ SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, *x, *y)
+ ; maxcorr = max(maxcorr, sum)
+ CMP r0, r14
+ ; xcorr[i] = sum
+ STR r14, [r2], #4
+ MOVLT r0, r14
+celt_pitch_xcorr_edsp_done
+ LDMFD sp!, {r4-r11, pc}
+ ENDP
+
+ENDIF
+
+END