/*
 * Copyright (C) 2006 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef SkPaint_DEFINED
#define SkPaint_DEFINED

#include "SkColor.h"
#include "SkMath.h"
#include "SkPorterDuff.h"

class SkAutoGlyphCache;
class SkColorFilter;
class SkDescriptor;
class SkFlattenableReadBuffer;
class SkFlattenableWriteBuffer;
struct SkGlyph;
struct SkRect;
class SkGlyphCache;
class SkMaskFilter;
class SkMatrix;
class SkPath;
class SkPathEffect;
class SkRasterizer;
class SkShader;
class SkDrawLooper;
class SkTypeface;
class SkXfermode;

typedef const SkGlyph& (*SkDrawCacheProc)(SkGlyphCache*, const char**,
                                           SkFixed x, SkFixed y);

typedef const SkGlyph& (*SkMeasureCacheProc)(SkGlyphCache*, const char**);

/** \class SkPaint

    The SkPaint class holds the style and color information about how to draw
    geometries, text and bitmaps.
*/
class SkPaint {
public:
    SkPaint();
    SkPaint(const SkPaint& paint);
    ~SkPaint();

    SkPaint& operator=(const SkPaint&);

    friend int operator==(const SkPaint& a, const SkPaint& b);
    friend int operator!=(const SkPaint& a, const SkPaint& b)
    {
        return !(a == b);
    }
    
    void flatten(SkFlattenableWriteBuffer&) const;
    void unflatten(SkFlattenableReadBuffer&);

    /** Restores the paint to its initial settings.
    */
    void reset();

    /** Specifies the bit values that are stored in the paint's flags.
    */
    enum Flags {
        kAntiAlias_Flag       = 0x01,   //!< mask to enable antialiasing
        kFilterBitmap_Flag    = 0x02,   //!< mask to enable bitmap filtering
        kDither_Flag          = 0x04,   //!< mask to enable dithering
        kUnderlineText_Flag   = 0x08,   //!< mask to enable underline text
        kStrikeThruText_Flag  = 0x10,   //!< mask to enable strike-thru text
        kFakeBoldText_Flag    = 0x20,   //!< mask to enable fake-bold text
        kLinearText_Flag      = 0x40,   //!< mask to enable linear-text
        kSubpixelText_Flag    = 0x80,   //!< mask to enable subpixel-text
        kDevKernText_Flag     = 0x100,  //!< mask to enable device kerning text

        kAllFlags = 0x1FF
    };

    /** Return the paint's flags. Use the Flag enum to test flag values.
        @return the paint's flags (see enums ending in _Flag for bit masks)
    */
    uint32_t getFlags() const { return fFlags; }

    /** Set the paint's flags. Use the Flag enum to specific flag values.
        @param flags    The new flag bits for the paint (see Flags enum)
    */
    void setFlags(uint32_t flags);

    /** Helper for getFlags(), returning true if kAntiAlias_Flag bit is set
        @return true if the antialias bit is set in the paint's flags.
        */
    bool isAntiAlias() const
    {
        return SkToBool(this->getFlags() & kAntiAlias_Flag);
    }
    
    /** Helper for setFlags(), setting or clearing the kAntiAlias_Flag bit
        @param aa   true to enable antialiasing, false to disable it
        */
    void setAntiAlias(bool aa);
    
    /** Helper for getFlags(), returning true if kDither_Flag bit is set
        @return true if the dithering bit is set in the paint's flags.
        */
    bool isDither() const
    {
        return SkToBool(this->getFlags() & kDither_Flag);
    }
    
    /** Helper for setFlags(), setting or clearing the kDither_Flag bit
        @param dither   true to enable dithering, false to disable it
        */
    void setDither(bool dither);
    
    /** Helper for getFlags(), returning true if kLinearText_Flag bit is set
        @return true if the lineartext bit is set in the paint's flags
    */
    bool isLinearText() const
    {
        return SkToBool(this->getFlags() & kLinearText_Flag);
    }

    /** Helper for setFlags(), setting or clearing the kLinearText_Flag bit
        @param linearText true to set the linearText bit in the paint's flags,
                          false to clear it.
    */
    void setLinearText(bool linearText);

    /** Helper for getFlags(), returning true if kSubpixelText_Flag bit is set
        @return true if the lineartext bit is set in the paint's flags
    */
    bool isSubpixelText() const
    {
        return SkToBool(this->getFlags() & kSubpixelText_Flag);
    }
    
    /** Helper for setFlags(), setting or clearing the kSubpixelText_Flag bit
        @param subpixelText true to set the subpixelText bit in the paint's
                            flags, false to clear it.
    */
    void setSubpixelText(bool subpixelText);
    
    /** Helper for getFlags(), returning true if kUnderlineText_Flag bit is set
        @return true if the underlineText bit is set in the paint's flags.
    */
    bool isUnderlineText() const
    {
        return SkToBool(this->getFlags() & kUnderlineText_Flag);
    }

    /** Helper for setFlags(), setting or clearing the kUnderlineText_Flag bit
        @param underlineText true to set the underlineText bit in the paint's
                             flags, false to clear it.
    */
    void setUnderlineText(bool underlineText);

    /** Helper for getFlags(), returns true if kStrikeThruText_Flag bit is set
        @return true if the strikeThruText bit is set in the paint's flags.
    */
    bool    isStrikeThruText() const
    {
        return SkToBool(this->getFlags() & kStrikeThruText_Flag);
    }

    /** Helper for setFlags(), setting or clearing the kStrikeThruText_Flag bit
        @param strikeThruText   true to set the strikeThruText bit in the
                                paint's flags, false to clear it.
    */
    void setStrikeThruText(bool strikeThruText);

    /** Helper for getFlags(), returns true if kFakeBoldText_Flag bit is set
        @return true if the kFakeBoldText_Flag bit is set in the paint's flags.
    */
    bool isFakeBoldText() const
    {
        return SkToBool(this->getFlags() & kFakeBoldText_Flag);
    }

    /** Helper for setFlags(), setting or clearing the kFakeBoldText_Flag bit
        @param fakeBoldText true to set the kFakeBoldText_Flag bit in the paint's
                            flags, false to clear it.
    */
    void setFakeBoldText(bool fakeBoldText);

    /** Helper for getFlags(), returns true if kDevKernText_Flag bit is set
        @return true if the kernText bit is set in the paint's flags.
    */
    bool isDevKernText() const
    {
        return SkToBool(this->getFlags() & kDevKernText_Flag);
    }

    /** Helper for setFlags(), setting or clearing the kKernText_Flag bit
        @param kernText true to set the kKernText_Flag bit in the paint's
                            flags, false to clear it.
    */
    void setDevKernText(bool devKernText);

    bool isFilterBitmap() const
    {
        return SkToBool(this->getFlags() & kFilterBitmap_Flag);
    }
    
    void setFilterBitmap(bool filterBitmap);

    /** Styles apply to rect, oval, path, and text.
        Bitmaps are always drawn in "fill", and lines are always drawn in
        "stroke".
    */
    enum Style {
        kFill_Style,            //!< fill with the paint's color
        kStroke_Style,          //!< stroke with the paint's color
        kStrokeAndFill_Style,   //!< fill and stroke with the paint's color

        kStyleCount,
    };

    /** Return the paint's style, used for controlling how primitives'
        geometries are interpreted (except for drawBitmap, which always assumes
        kFill_Style).
        @return the paint's Style
    */
    Style getStyle() const { return (Style)fStyle; }

    /** Set the paint's style, used for controlling how primitives'
        geometries are interpreted (except for drawBitmap, which always assumes
        Fill).
        @param style    The new style to set in the paint
    */
    void setStyle(Style style);

    /** Return the paint's color. Note that the color is a 32bit value
        containing alpha as well as r,g,b. This 32bit value is not
        premultiplied, meaning that its alpha can be any value, regardless of
        the values of r,g,b.
        @return the paint's color (and alpha).
    */
    SkColor getColor() const { return fColor; }

    /** Set the paint's color. Note that the color is a 32bit value containing
        alpha as well as r,g,b. This 32bit value is not premultiplied, meaning
        that its alpha can be any value, regardless of the values of r,g,b.
        @param color    The new color (including alpha) to set in the paint.
    */
    void setColor(SkColor color);

    /** Helper to getColor() that just returns the color's alpha value.
        @return the alpha component of the paint's color.
        */
    uint8_t getAlpha() const { return SkToU8(SkColorGetA(fColor)); }
    
    /** Helper to setColor(), that only assigns the color's alpha value,
        leaving its r,g,b values unchanged.
        @param a    set the alpha component (0..255) of the paint's color.
    */
    void setAlpha(U8CPU a);

    /** Helper to setColor(), that takes a,r,g,b and constructs the color value
        using SkColorSetARGB()
        @param a    The new alpha component (0..255) of the paint's color.
        @param r    The new red component (0..255) of the paint's color.
        @param g    The new green component (0..255) of the paint's color.
        @param b    The new blue component (0..255) of the paint's color.
    */
    void setARGB(U8CPU a, U8CPU r, U8CPU g, U8CPU b);

    /** Return the width for stroking. 
        <p />
        A value of 0 strokes in hairline mode.
        Hairlines always draw 1-pixel wide, regardless of the matrix.
        @return the paint's stroke width, used whenever the paint's style is
                Stroke or StrokeAndFill.
    */
    SkScalar getStrokeWidth() const { return fWidth; }

    /** Set the width for stroking. 
        Pass 0 to stroke in hairline mode.
        Hairlines always draw 1-pixel wide, regardless of the matrix.
        @param width set the paint's stroke width, used whenever the paint's
                     style is Stroke or StrokeAndFill.
    */
    void setStrokeWidth(SkScalar width);

    /** Return the paint's stroke miter value. This is used to control the
        behavior of miter joins when the joins angle is sharp.
        @return the paint's miter limit, used whenever the paint's style is
                Stroke or StrokeAndFill.
    */
    SkScalar getStrokeMiter() const { return fMiterLimit; }

    /** Set the paint's stroke miter value. This is used to control the
        behavior of miter joins when the joins angle is sharp. This value must
        be >= 0.
        @param miter    set the miter limit on the paint, used whenever the
                        paint's style is Stroke or StrokeAndFill.
    */
    void setStrokeMiter(SkScalar miter);

    /** Cap enum specifies the settings for the paint's strokecap. This is the
        treatment that is applied to the beginning and end of each non-closed
        contour (e.g. lines).
    */
    enum Cap {
        kButt_Cap,      //!< begin/end contours with no extension
        kRound_Cap,     //!< begin/end contours with a semi-circle extension
        kSquare_Cap,    //!< begin/end contours with a half square extension

        kCapCount,
        kDefault_Cap = kButt_Cap
    };

    /** Join enum specifies the settings for the paint's strokejoin. This is
        the treatment that is applied to corners in paths and rectangles.
    */
    enum Join {
        kMiter_Join,    //!< connect path segments with a sharp join
        kRound_Join,    //!< connect path segments with a round join
        kBevel_Join,    //!< connect path segments with a flat bevel join

        kJoinCount,
        kDefault_Join = kMiter_Join
    };

    /** Return the paint's stroke cap type, controlling how the start and end
        of stroked lines and paths are treated.
        @return the line cap style for the paint, used whenever the paint's
                style is Stroke or StrokeAndFill.
    */
    Cap getStrokeCap() const { return (Cap)fCapType; }

    /** Set the paint's stroke cap type.
        @param cap  set the paint's line cap style, used whenever the paint's
                    style is Stroke or StrokeAndFill.
    */
    void setStrokeCap(Cap cap);

    /** Return the paint's stroke join type.
        @return the paint's line join style, used whenever the paint's style is
                Stroke or StrokeAndFill.
    */
    Join getStrokeJoin() const { return (Join)fJoinType; }

    /** Set the paint's stroke join type.
        @param join set the paint's line join style, used whenever the paint's
                    style is Stroke or StrokeAndFill.
    */
    void setStrokeJoin(Join join);

    /** Applies any/all effects (patheffect, stroking) to src, returning the
        result in dst. The result is that drawing src with this paint will be
        the same as drawing dst with a default paint (at least from the
        geometric perspective).
        @param src  input path
        @param dst  output path (may be the same as src)
        @return     true if the path should be filled, or false if it should be
                    drawn with a hairline (width == 0)
    */
    bool getFillPath(const SkPath& src, SkPath* dst) const;

    /** Returns true if the current paint settings allow for fast computation of
        bounds (i.e. there is nothing complex like a patheffect that would make
        the bounds computation expensive.
    */
    bool canComputeFastBounds() const;
    
    /** Only call this if canComputeFastBounds() returned true. This takes a
        raw rectangle (the raw bounds of a shape), and adjusts it for stylistic
        effects in the paint (e.g. stroking). If needed, it uses the storage
        rect parameter. It returns the adjusted bounds that can then be used
        for quickReject tests.
     
        The returned rect will either be orig or storage, thus the caller
        should not rely on storage being set to the result, but should always
        use the retured value. It is legal for orig and storage to be the same
        rect.
        
        e.g.
        if (paint.canComputeFastBounds()) {
            SkRect r, storage;
            path.computeBounds(&r, SkPath::kFast_BoundsType);
            const SkRect& fastR = paint.computeFastBounds(r, &storage);
            if (canvas->quickReject(fastR, ...)) {
                // don't draw the path
            }
        }
    */
    const SkRect& computeFastBounds(const SkRect& orig, SkRect* storage) const;

    /** Get the paint's shader object.
        <p />
      The shader's reference count is not affected.
        @return the paint's shader (or NULL)
    */
    SkShader* getShader() const { return fShader; }

    /** Set or clear the shader object.
        <p />
        Pass NULL to clear any previous shader.
        As a convenience, the parameter passed is also returned.
        If a previous shader exists, its reference count is decremented.
        If shader is not NULL, its reference count is incremented.
        @param shader   May be NULL. The shader to be installed in the paint
        @return         shader
    */
    SkShader* setShader(SkShader* shader);
    
    /** Get the paint's colorfilter. If there is a colorfilter, its reference
        count is not changed.
        @return the paint's colorfilter (or NULL)
    */
    SkColorFilter* getColorFilter() const { return fColorFilter; }

    /** Set or clear the paint's colorfilter, returning the parameter.
        <p />
        If the paint already has a filter, its reference count is decremented.
        If filter is not NULL, its reference count is incremented.
        @param filter   May be NULL. The filter to be installed in the paint
        @return         filter
    */
    SkColorFilter* setColorFilter(SkColorFilter* filter);

    /** Get the paint's xfermode object.
        <p />
      The xfermode's reference count is not affected.
        @return the paint's xfermode (or NULL)
    */
    SkXfermode* getXfermode() const { return fXfermode; }

    /** Set or clear the xfermode object.
        <p />
        Pass NULL to clear any previous xfermode.
        As a convenience, the parameter passed is also returned.
        If a previous xfermode exists, its reference count is decremented.
        If xfermode is not NULL, its reference count is incremented.
        @param xfermode May be NULL. The new xfermode to be installed in the
                        paint
        @return         xfermode
    */
    SkXfermode* setXfermode(SkXfermode* xfermode);
    
    /** Helper for setXfermode, passing the corresponding xfermode object
        returned from the PorterDuff factory.
        @param mode The porter-duff mode used to create an xfermode for the
                    paint.
        @return     the resulting xfermode object (or NULL if the mode is
                    SrcOver)
    */
    SkXfermode* setPorterDuffXfermode(SkPorterDuff::Mode mode);

    /** Get the paint's patheffect object.
        <p />
      The patheffect reference count is not affected.
        @return the paint's patheffect (or NULL)
    */
    SkPathEffect* getPathEffect() const { return fPathEffect; }

    /** Set or clear the patheffect object.
        <p />
        Pass NULL to clear any previous patheffect.
        As a convenience, the parameter passed is also returned.
        If a previous patheffect exists, its reference count is decremented.
        If patheffect is not NULL, its reference count is incremented.
        @param effect   May be NULL. The new patheffect to be installed in the
                        paint
        @return         effect
    */
    SkPathEffect* setPathEffect(SkPathEffect* effect);

    /** Get the paint's maskfilter object.
        <p />
      The maskfilter reference count is not affected.
        @return the paint's maskfilter (or NULL)
    */
    SkMaskFilter* getMaskFilter() const { return fMaskFilter; }

    /** Set or clear the maskfilter object.
        <p />
        Pass NULL to clear any previous maskfilter.
        As a convenience, the parameter passed is also returned.
        If a previous maskfilter exists, its reference count is decremented.
        If maskfilter is not NULL, its reference count is incremented.
        @param maskfilter   May be NULL. The new maskfilter to be installed in
                            the paint
        @return             maskfilter
    */
    SkMaskFilter* setMaskFilter(SkMaskFilter* maskfilter);

    // These attributes are for text/fonts

    /** Get the paint's typeface object.
        <p />
        The typeface object identifies which font to use when drawing or
        measuring text. The typeface reference count is not affected.
        @return the paint's typeface (or NULL)
    */
    SkTypeface* getTypeface() const { return fTypeface; }

    /** Set or clear the typeface object.
        <p />
        Pass NULL to clear any previous typeface.
        As a convenience, the parameter passed is also returned.
        If a previous typeface exists, its reference count is decremented.
        If typeface is not NULL, its reference count is incremented.
        @param typeface May be NULL. The new typeface to be installed in the
                        paint
        @return         typeface
    */
    SkTypeface* setTypeface(SkTypeface* typeface);

    /** Get the paint's rasterizer (or NULL).
        <p />
        The raster controls how paths/text are turned into alpha masks.
        @return the paint's rasterizer (or NULL)
    */
    SkRasterizer* getRasterizer() const { return fRasterizer; }

    /** Set or clear the rasterizer object.
        <p />
        Pass NULL to clear any previous rasterizer.
        As a convenience, the parameter passed is also returned.
        If a previous rasterizer exists in the paint, its reference count is
        decremented. If rasterizer is not NULL, its reference count is
        incremented.
        @param rasterizer May be NULL. The new rasterizer to be installed in
                          the paint.
        @return           rasterizer
    */
    SkRasterizer* setRasterizer(SkRasterizer* rasterizer);

    SkDrawLooper* getLooper() const { return fLooper; }
    SkDrawLooper* setLooper(SkDrawLooper*);

    enum Align {
        kLeft_Align,
        kCenter_Align,
        kRight_Align,

        kAlignCount
    };
    /** Return the paint's Align value for drawing text.
        @return the paint's Align value for drawing text.
    */
    Align   getTextAlign() const { return (Align)fTextAlign; }
    /** Set the paint's text alignment.
        @param align set the paint's Align value for drawing text.
    */
    void    setTextAlign(Align align);

    /** Return the paint's text size.
        @return the paint's text size.
    */
    SkScalar getTextSize() const { return fTextSize; }

    /** Set the paint's text size. This value must be > 0
        @param textSize set the paint's text size.
    */
    void setTextSize(SkScalar textSize);

    /** Return the paint's horizontal scale factor for text. The default value
        is 1.0.
        @return the paint's scale factor in X for drawing/measuring text
    */
    SkScalar getTextScaleX() const { return fTextScaleX; }

    /** Set the paint's horizontal scale factor for text. The default value
        is 1.0. Values > 1.0 will stretch the text wider. Values < 1.0 will
        stretch the text narrower.
        @param scaleX   set the paint's scale factor in X for drawing/measuring
                        text.
    */
    void setTextScaleX(SkScalar scaleX);

    /** Return the paint's horizontal skew factor for text. The default value
        is 0.
        @return the paint's skew factor in X for drawing text.
    */
    SkScalar getTextSkewX() const { return fTextSkewX; }

    /** Set the paint's horizontal skew factor for text. The default value
        is 0. For approximating oblique text, use values around -0.25.
        @param skewX set the paint's skew factor in X for drawing text.
    */
    void setTextSkewX(SkScalar skewX);

    /** Describes how to interpret the text parameters that are passed to paint
        methods like measureText() and getTextWidths().
    */
    enum TextEncoding {
        kUTF8_TextEncoding,     //!< the text parameters are UTF8
        kUTF16_TextEncoding,    //!< the text parameters are UTF16
        kGlyphID_TextEncoding   //!< the text parameters are glyph indices
    };
    
    TextEncoding getTextEncoding() const
    {
        return (TextEncoding)fTextEncoding;
    }

    void setTextEncoding(TextEncoding encoding);

    struct FontMetrics {
        SkScalar    fTop;       //!< The greatest distance above the baseline for any glyph (will be <= 0)
        SkScalar    fAscent;    //!< The recommended distance above the baseline (will be <= 0)
        SkScalar    fDescent;   //!< The recommended distance below the baseline (will be >= 0)
        SkScalar    fBottom;    //!< The greatest distance below the baseline for any glyph (will be >= 0)
        SkScalar    fLeading;   //!< The recommended distance to add between lines of text (will be >= 0)
    };
    
    /** Return the recommend spacing between lines (which will be
        fDescent - fAscent + fLeading).
        If metrics is not null, return in it the font metrics for the
        typeface/pointsize/etc. currently set in the paint. 
        @param metrics      If not null, returns the font metrics for the
                            current typeface/pointsize/etc setting in this
                            paint.
        @param scale        If not 0, return width as if the canvas were scaled
                            by this value
        @param return the recommended spacing between lines
    */
    SkScalar getFontMetrics(FontMetrics* metrics, SkScalar scale = 0) const;
    
    /** Return the recommend line spacing. This will be
        fDescent - fAscent + fLeading
    */
    SkScalar getFontSpacing() const { return this->getFontMetrics(NULL, 0); }

    /** Convert the specified text into glyph IDs, returning the number of
        glyphs ID written. If glyphs is NULL, it is ignore and only the count
        is returned.
    */
    int textToGlyphs(const void* text, size_t byteLength,
                     uint16_t glyphs[]) const;

    /** Return the number of drawable units in the specified text buffer.
        This looks at the current TextEncoding field of the paint. If you also
        want to have the text converted into glyph IDs, call textToGlyphs
        instead.
    */
    int countText(const void* text, size_t byteLength) const
    {
        return this->textToGlyphs(text, byteLength, NULL);
    }

    /** Return the width of the text.
        @param text         The text to be measured
        @param length       Number of bytes of text to measure
        @param bounds       If not NULL, returns the bounds of the text,
                            relative to (0, 0).
        @param scale        If not 0, return width as if the canvas were scaled
                            by this value
        @return             The advance width of the text
    */
    SkScalar    measureText(const void* text, size_t length,
                            SkRect* bounds, SkScalar scale = 0) const;

    /** Return the width of the text.
        @param text         Address of the text
        @param length       Number of bytes of text to measure
        @return The width of the text
    */
    SkScalar measureText(const void* text, size_t length) const
    {
        return this->measureText(text, length, NULL, 0);
    }
    
    /** Specify the direction the text buffer should be processed in breakText()
    */
    enum TextBufferDirection {
        /** When measuring text for breakText(), begin at the start of the text
            buffer and proceed forward through the data. This is the default.
        */
        kForward_TextBufferDirection,
        /** When measuring text for breakText(), begin at the end of the text
            buffer and proceed backwards through the data.
        */
        kBackward_TextBufferDirection
    };

    /** Return the width of the text.
        @param text     The text to be measured
        @param length   Number of bytes of text to measure
        @param maxWidth Maximum width. Only the subset of text whose accumulated
                        widths are <= maxWidth are measured.
        @param measuredWidth Optional. If non-null, this returns the actual
                        width of the measured text.
        @param tbd      Optional. The direction the text buffer should be
                        traversed during measuring.
        @return         The number of bytes of text that were measured. Will be
                        <= length.
    */
    size_t  breakText(const void* text, size_t length, SkScalar maxWidth,
                      SkScalar* measuredWidth = NULL,
                      TextBufferDirection tbd = kForward_TextBufferDirection)
                      const;

    /** Return the advance widths for the characters in the string.
        @param text         the text
        @param byteLength   number of bytes to of text
        @param widths       If not null, returns the array of advance widths of
                            the glyphs. If not NULL, must be at least a large
                            as the number of unichars in the specified text.
        @param bounds       If not null, returns the bounds for each of
                            character, relative to (0, 0)
        @return the number of unichars in the specified text.
    */
    int getTextWidths(const void* text, size_t byteLength, SkScalar widths[],
                      SkRect bounds[] = NULL) const;

    /** Return the path (outline) for the specified text.
        Note: just like SkCanvas::drawText, this will respect the Align setting
              in the paint.
    */
    void getTextPath(const void* text, size_t length, SkScalar x, SkScalar y,
                     SkPath* path) const;

private:
    SkTypeface*     fTypeface;
    SkScalar        fTextSize;
    SkScalar        fTextScaleX;
    SkScalar        fTextSkewX;

    SkPathEffect*   fPathEffect;
    SkShader*       fShader;
    SkXfermode*     fXfermode;
    SkMaskFilter*   fMaskFilter;
    SkColorFilter*  fColorFilter;
    SkRasterizer*   fRasterizer;
    SkDrawLooper*   fLooper;

    SkColor         fColor;
    SkScalar        fWidth;
    SkScalar        fMiterLimit;
    unsigned        fFlags : 9;
    unsigned        fTextAlign : 2;
    unsigned        fCapType : 2;
    unsigned        fJoinType : 2;
    unsigned        fStyle : 2;
    unsigned        fTextEncoding : 2;  // 3 values

    SkDrawCacheProc    getDrawCacheProc() const;
    SkMeasureCacheProc getMeasureCacheProc(TextBufferDirection dir,
                                           bool needFullMetrics) const;

    SkScalar measure_text(SkGlyphCache*, const char* text, size_t length,
                          int* count, SkRect* bounds) const;

    SkGlyphCache*   detachCache(const SkMatrix*) const;

    void descriptorProc(const SkMatrix* deviceMatrix,
                        void (*proc)(const SkDescriptor*, void*),
                        void* context) const;
        
    enum {
        kCanonicalTextSizeForPaths = 64
    };
    friend class SkCanvas;
    friend class SkDraw;
    friend class SkAutoGlyphCache;
    friend class SkTextToPathIter;
};

//////////////////////////////////////////////////////////////////////////

#include "SkPathEffect.h"

/** \class SkStrokePathEffect

    SkStrokePathEffect simulates stroking inside a patheffect, allowing the
    caller to have explicit control of when to stroke a path. Typically this is
    used if the caller wants to stroke before another patheffect is applied
    (using SkComposePathEffect or SkSumPathEffect).
*/
class SkStrokePathEffect : public SkPathEffect {
public:
    SkStrokePathEffect(const SkPaint&);
    SkStrokePathEffect(SkScalar width, SkPaint::Style, SkPaint::Join,
                       SkPaint::Cap, SkScalar miterLimit = -1);

    // overrides
    // This method is not exported to java.
    virtual bool filterPath(SkPath* dst, const SkPath& src, SkScalar* width);

    // overrides for SkFlattenable
    // This method is not exported to java.
    virtual void flatten(SkFlattenableWriteBuffer&);
    // This method is not exported to java.
    virtual Factory getFactory();

private:
    SkScalar    fWidth, fMiter;
    uint8_t     fStyle, fJoin, fCap;

    static SkFlattenable* CreateProc(SkFlattenableReadBuffer&);
    SkStrokePathEffect(SkFlattenableReadBuffer&);

    typedef SkPathEffect INHERITED;

    // illegal
    SkStrokePathEffect(const SkStrokePathEffect&);
    SkStrokePathEffect& operator=(const SkStrokePathEffect&);
};

#endif