Added support for strict mode parameter and object property validation.
Fixed a couple of crash bugs.
git-svn-id: http://v8.googlecode.com/svn/trunk@6521 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
diff --git a/src/arm/assembler-arm.cc b/src/arm/assembler-arm.cc
index 155aef8..0f52ac6 100644
--- a/src/arm/assembler-arm.cc
+++ b/src/arm/assembler-arm.cc
@@ -213,74 +213,29 @@
// -----------------------------------------------------------------------------
-// Implementation of Assembler.
-
-// Instruction encoding bits.
-enum {
- H = 1 << 5, // halfword (or byte)
- S6 = 1 << 6, // signed (or unsigned)
- L = 1 << 20, // load (or store)
- S = 1 << 20, // set condition code (or leave unchanged)
- W = 1 << 21, // writeback base register (or leave unchanged)
- A = 1 << 21, // accumulate in multiply instruction (or not)
- B = 1 << 22, // unsigned byte (or word)
- N = 1 << 22, // long (or short)
- U = 1 << 23, // positive (or negative) offset/index
- P = 1 << 24, // offset/pre-indexed addressing (or post-indexed addressing)
- I = 1 << 25, // immediate shifter operand (or not)
-
- B4 = 1 << 4,
- B5 = 1 << 5,
- B6 = 1 << 6,
- B7 = 1 << 7,
- B8 = 1 << 8,
- B9 = 1 << 9,
- B12 = 1 << 12,
- B16 = 1 << 16,
- B18 = 1 << 18,
- B19 = 1 << 19,
- B20 = 1 << 20,
- B21 = 1 << 21,
- B22 = 1 << 22,
- B23 = 1 << 23,
- B24 = 1 << 24,
- B25 = 1 << 25,
- B26 = 1 << 26,
- B27 = 1 << 27,
-
- // Instruction bit masks.
- RdMask = 15 << 12, // in str instruction
- CondMask = 15 << 28,
- CoprocessorMask = 15 << 8,
- OpCodeMask = 15 << 21, // in data-processing instructions
- Imm24Mask = (1 << 24) - 1,
- Off12Mask = (1 << 12) - 1,
- // Reserved condition.
- nv = 15 << 28
-};
-
+// Specific instructions, constants, and masks.
// add(sp, sp, 4) instruction (aka Pop())
-static const Instr kPopInstruction =
- al | 4 * B21 | 4 | LeaveCC | I | sp.code() * B16 | sp.code() * B12;
+const Instr kPopInstruction =
+ al | PostIndex | 4 | LeaveCC | I | sp.code() * B16 | sp.code() * B12;
// str(r, MemOperand(sp, 4, NegPreIndex), al) instruction (aka push(r))
// register r is not encoded.
-static const Instr kPushRegPattern =
+const Instr kPushRegPattern =
al | B26 | 4 | NegPreIndex | sp.code() * B16;
// ldr(r, MemOperand(sp, 4, PostIndex), al) instruction (aka pop(r))
// register r is not encoded.
-static const Instr kPopRegPattern =
+const Instr kPopRegPattern =
al | B26 | L | 4 | PostIndex | sp.code() * B16;
// mov lr, pc
-const Instr kMovLrPc = al | 13*B21 | pc.code() | lr.code() * B12;
+const Instr kMovLrPc = al | MOV | pc.code() | lr.code() * B12;
// ldr rd, [pc, #offset]
-const Instr kLdrPCMask = CondMask | 15 * B24 | 7 * B20 | 15 * B16;
+const Instr kLdrPCMask = kCondMask | 15 * B24 | 7 * B20 | 15 * B16;
const Instr kLdrPCPattern = al | 5 * B24 | L | pc.code() * B16;
// blxcc rm
const Instr kBlxRegMask =
15 * B24 | 15 * B20 | 15 * B16 | 15 * B12 | 15 * B8 | 15 * B4;
const Instr kBlxRegPattern =
- B24 | B21 | 15 * B16 | 15 * B12 | 15 * B8 | 3 * B4;
+ B24 | B21 | 15 * B16 | 15 * B12 | 15 * B8 | BLX;
const Instr kMovMvnMask = 0x6d * B21 | 0xf * B16;
const Instr kMovMvnPattern = 0xd * B21;
const Instr kMovMvnFlip = B22;
@@ -292,33 +247,28 @@
const Instr kCmpCmnMask = 0xdd * B20 | 0xf * B12;
const Instr kCmpCmnPattern = 0x15 * B20;
const Instr kCmpCmnFlip = B21;
-const Instr kALUMask = 0x6f * B21;
-const Instr kAddPattern = 0x4 * B21;
-const Instr kSubPattern = 0x2 * B21;
-const Instr kBicPattern = 0xe * B21;
-const Instr kAndPattern = 0x0 * B21;
const Instr kAddSubFlip = 0x6 * B21;
const Instr kAndBicFlip = 0xe * B21;
// A mask for the Rd register for push, pop, ldr, str instructions.
-const Instr kRdMask = 0x0000f000;
-static const int kRdShift = 12;
-static const Instr kLdrRegFpOffsetPattern =
+const Instr kLdrRegFpOffsetPattern =
al | B26 | L | Offset | fp.code() * B16;
-static const Instr kStrRegFpOffsetPattern =
+const Instr kStrRegFpOffsetPattern =
al | B26 | Offset | fp.code() * B16;
-static const Instr kLdrRegFpNegOffsetPattern =
+const Instr kLdrRegFpNegOffsetPattern =
al | B26 | L | NegOffset | fp.code() * B16;
-static const Instr kStrRegFpNegOffsetPattern =
+const Instr kStrRegFpNegOffsetPattern =
al | B26 | NegOffset | fp.code() * B16;
-static const Instr kLdrStrInstrTypeMask = 0xffff0000;
-static const Instr kLdrStrInstrArgumentMask = 0x0000ffff;
-static const Instr kLdrStrOffsetMask = 0x00000fff;
+const Instr kLdrStrInstrTypeMask = 0xffff0000;
+const Instr kLdrStrInstrArgumentMask = 0x0000ffff;
+const Instr kLdrStrOffsetMask = 0x00000fff;
+
// Spare buffer.
static const int kMinimalBufferSize = 4*KB;
static byte* spare_buffer_ = NULL;
+
Assembler::Assembler(void* buffer, int buffer_size)
: positions_recorder_(this),
allow_peephole_optimization_(false) {
@@ -411,7 +361,7 @@
ASSERT(IsBranch(instr));
// Take the jump offset in the lower 24 bits, sign extend it and multiply it
// with 4 to get the offset in bytes.
- return ((instr & Imm24Mask) << 8) >> 6;
+ return ((instr & kImm24Mask) << 8) >> 6;
}
@@ -423,7 +373,7 @@
int Assembler::GetLdrRegisterImmediateOffset(Instr instr) {
ASSERT(IsLdrRegisterImmediate(instr));
bool positive = (instr & B23) == B23;
- int offset = instr & Off12Mask; // Zero extended offset.
+ int offset = instr & kOff12Mask; // Zero extended offset.
return positive ? offset : -offset;
}
@@ -436,7 +386,7 @@
// Set bit indicating whether the offset should be added.
instr = (instr & ~B23) | (positive ? B23 : 0);
// Set the actual offset.
- return (instr & ~Off12Mask) | offset;
+ return (instr & ~kOff12Mask) | offset;
}
@@ -453,7 +403,7 @@
// Set bit indicating whether the offset should be added.
instr = (instr & ~B23) | (positive ? B23 : 0);
// Set the actual offset.
- return (instr & ~Off12Mask) | offset;
+ return (instr & ~kOff12Mask) | offset;
}
@@ -467,13 +417,13 @@
ASSERT(offset >= 0);
ASSERT(is_uint12(offset));
// Set the offset.
- return (instr & ~Off12Mask) | offset;
+ return (instr & ~kOff12Mask) | offset;
}
Register Assembler::GetRd(Instr instr) {
Register reg;
- reg.code_ = ((instr & kRdMask) >> kRdShift);
+ reg.code_ = Instruction::RdValue(instr);
return reg;
}
@@ -511,7 +461,7 @@
bool Assembler::IsLdrPcImmediateOffset(Instr instr) {
// Check the instruction is indeed a
// ldr<cond> <Rd>, [pc +/- offset_12].
- return (instr & 0x0f7f0000) == 0x051f0000;
+ return (instr & (kLdrPCMask & ~kCondMask)) == 0x051f0000;
}
@@ -532,13 +482,14 @@
int Assembler::target_at(int pos) {
Instr instr = instr_at(pos);
- if ((instr & ~Imm24Mask) == 0) {
+ if ((instr & ~kImm24Mask) == 0) {
// Emitted label constant, not part of a branch.
return instr - (Code::kHeaderSize - kHeapObjectTag);
}
ASSERT((instr & 7*B25) == 5*B25); // b, bl, or blx imm24
- int imm26 = ((instr & Imm24Mask) << 8) >> 6;
- if ((instr & CondMask) == nv && (instr & B24) != 0) {
+ int imm26 = ((instr & kImm24Mask) << 8) >> 6;
+ if ((Instruction::ConditionField(instr) == kSpecialCondition) &&
+ ((instr & B24) != 0)) {
// blx uses bit 24 to encode bit 2 of imm26
imm26 += 2;
}
@@ -548,7 +499,7 @@
void Assembler::target_at_put(int pos, int target_pos) {
Instr instr = instr_at(pos);
- if ((instr & ~Imm24Mask) == 0) {
+ if ((instr & ~kImm24Mask) == 0) {
ASSERT(target_pos == kEndOfChain || target_pos >= 0);
// Emitted label constant, not part of a branch.
// Make label relative to Code* of generated Code object.
@@ -557,17 +508,17 @@
}
int imm26 = target_pos - (pos + kPcLoadDelta);
ASSERT((instr & 7*B25) == 5*B25); // b, bl, or blx imm24
- if ((instr & CondMask) == nv) {
+ if (Instruction::ConditionField(instr) == kSpecialCondition) {
// blx uses bit 24 to encode bit 2 of imm26
ASSERT((imm26 & 1) == 0);
- instr = (instr & ~(B24 | Imm24Mask)) | ((imm26 & 2) >> 1)*B24;
+ instr = (instr & ~(B24 | kImm24Mask)) | ((imm26 & 2) >> 1)*B24;
} else {
ASSERT((imm26 & 3) == 0);
- instr &= ~Imm24Mask;
+ instr &= ~kImm24Mask;
}
int imm24 = imm26 >> 2;
ASSERT(is_int24(imm24));
- instr_at_put(pos, instr | (imm24 & Imm24Mask));
+ instr_at_put(pos, instr | (imm24 & kImm24Mask));
}
@@ -582,14 +533,14 @@
while (l.is_linked()) {
PrintF("@ %d ", l.pos());
Instr instr = instr_at(l.pos());
- if ((instr & ~Imm24Mask) == 0) {
+ if ((instr & ~kImm24Mask) == 0) {
PrintF("value\n");
} else {
ASSERT((instr & 7*B25) == 5*B25); // b, bl, or blx
- int cond = instr & CondMask;
+ Condition cond = Instruction::ConditionField(instr);
const char* b;
const char* c;
- if (cond == nv) {
+ if (cond == kSpecialCondition) {
b = "blx";
c = "";
} else {
@@ -731,14 +682,14 @@
}
} else {
Instr alu_insn = (*instr & kALUMask);
- if (alu_insn == kAddPattern ||
- alu_insn == kSubPattern) {
+ if (alu_insn == ADD ||
+ alu_insn == SUB) {
if (fits_shifter(-imm32, rotate_imm, immed_8, NULL)) {
*instr ^= kAddSubFlip;
return true;
}
- } else if (alu_insn == kAndPattern ||
- alu_insn == kBicPattern) {
+ } else if (alu_insn == AND ||
+ alu_insn == BIC) {
if (fits_shifter(~imm32, rotate_imm, immed_8, NULL)) {
*instr ^= kAndBicFlip;
return true;
@@ -782,7 +733,7 @@
Register rd,
const Operand& x) {
CheckBuffer();
- ASSERT((instr & ~(CondMask | OpCodeMask | S)) == 0);
+ ASSERT((instr & ~(kCondMask | kOpCodeMask | S)) == 0);
if (!x.rm_.is_valid()) {
// Immediate.
uint32_t rotate_imm;
@@ -794,8 +745,8 @@
// However, if the original instruction is a 'mov rd, x' (not setting the
// condition code), then replace it with a 'ldr rd, [pc]'.
CHECK(!rn.is(ip)); // rn should never be ip, or will be trashed
- Condition cond = static_cast<Condition>(instr & CondMask);
- if ((instr & ~CondMask) == 13*B21) { // mov, S not set
+ Condition cond = Instruction::ConditionField(instr);
+ if ((instr & ~kCondMask) == 13*B21) { // mov, S not set
if (x.must_use_constant_pool() || !CpuFeatures::IsSupported(ARMv7)) {
RecordRelocInfo(x.rmode_, x.imm32_);
ldr(rd, MemOperand(pc, 0), cond);
@@ -836,7 +787,7 @@
void Assembler::addrmod2(Instr instr, Register rd, const MemOperand& x) {
- ASSERT((instr & ~(CondMask | B | L)) == B26);
+ ASSERT((instr & ~(kCondMask | B | L)) == B26);
int am = x.am_;
if (!x.rm_.is_valid()) {
// Immediate offset.
@@ -849,8 +800,7 @@
// Immediate offset cannot be encoded, load it first to register ip
// rn (and rd in a load) should never be ip, or will be trashed.
ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
- mov(ip, Operand(x.offset_), LeaveCC,
- static_cast<Condition>(instr & CondMask));
+ mov(ip, Operand(x.offset_), LeaveCC, Instruction::ConditionField(instr));
addrmod2(instr, rd, MemOperand(x.rn_, ip, x.am_));
return;
}
@@ -869,7 +819,7 @@
void Assembler::addrmod3(Instr instr, Register rd, const MemOperand& x) {
- ASSERT((instr & ~(CondMask | L | S6 | H)) == (B4 | B7));
+ ASSERT((instr & ~(kCondMask | L | S6 | H)) == (B4 | B7));
ASSERT(x.rn_.is_valid());
int am = x.am_;
if (!x.rm_.is_valid()) {
@@ -883,8 +833,7 @@
// Immediate offset cannot be encoded, load it first to register ip
// rn (and rd in a load) should never be ip, or will be trashed.
ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
- mov(ip, Operand(x.offset_), LeaveCC,
- static_cast<Condition>(instr & CondMask));
+ mov(ip, Operand(x.offset_), LeaveCC, Instruction::ConditionField(instr));
addrmod3(instr, rd, MemOperand(x.rn_, ip, x.am_));
return;
}
@@ -895,7 +844,7 @@
// rn (and rd in a load) should never be ip, or will be trashed.
ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
mov(ip, Operand(x.rm_, x.shift_op_, x.shift_imm_), LeaveCC,
- static_cast<Condition>(instr & CondMask));
+ Instruction::ConditionField(instr));
addrmod3(instr, rd, MemOperand(x.rn_, ip, x.am_));
return;
} else {
@@ -909,7 +858,7 @@
void Assembler::addrmod4(Instr instr, Register rn, RegList rl) {
- ASSERT((instr & ~(CondMask | P | U | W | L)) == B27);
+ ASSERT((instr & ~(kCondMask | P | U | W | L)) == B27);
ASSERT(rl != 0);
ASSERT(!rn.is(pc));
emit(instr | rn.code()*B16 | rl);
@@ -919,7 +868,7 @@
void Assembler::addrmod5(Instr instr, CRegister crd, const MemOperand& x) {
// Unindexed addressing is not encoded by this function.
ASSERT_EQ((B27 | B26),
- (instr & ~(CondMask | CoprocessorMask | P | U | N | W | L)));
+ (instr & ~(kCondMask | kCoprocessorMask | P | U | N | W | L)));
ASSERT(x.rn_.is_valid() && !x.rm_.is_valid());
int am = x.am_;
int offset_8 = x.offset_;
@@ -982,7 +931,7 @@
ASSERT((branch_offset & 3) == 0);
int imm24 = branch_offset >> 2;
ASSERT(is_int24(imm24));
- emit(cond | B27 | B25 | (imm24 & Imm24Mask));
+ emit(cond | B27 | B25 | (imm24 & kImm24Mask));
if (cond == al) {
// Dead code is a good location to emit the constant pool.
@@ -996,7 +945,7 @@
ASSERT((branch_offset & 3) == 0);
int imm24 = branch_offset >> 2;
ASSERT(is_int24(imm24));
- emit(cond | B27 | B25 | B24 | (imm24 & Imm24Mask));
+ emit(cond | B27 | B25 | B24 | (imm24 & kImm24Mask));
}
@@ -1006,21 +955,21 @@
int h = ((branch_offset & 2) >> 1)*B24;
int imm24 = branch_offset >> 2;
ASSERT(is_int24(imm24));
- emit(nv | B27 | B25 | h | (imm24 & Imm24Mask));
+ emit(kSpecialCondition | B27 | B25 | h | (imm24 & kImm24Mask));
}
void Assembler::blx(Register target, Condition cond) { // v5 and above
positions_recorder()->WriteRecordedPositions();
ASSERT(!target.is(pc));
- emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | 3*B4 | target.code());
+ emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | BLX | target.code());
}
void Assembler::bx(Register target, Condition cond) { // v5 and above, plus v4t
positions_recorder()->WriteRecordedPositions();
ASSERT(!target.is(pc)); // use of pc is actually allowed, but discouraged
- emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | B4 | target.code());
+ emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | BX | target.code());
}
@@ -1028,31 +977,31 @@
void Assembler::and_(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 0*B21 | s, src1, dst, src2);
+ addrmod1(cond | AND | s, src1, dst, src2);
}
void Assembler::eor(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 1*B21 | s, src1, dst, src2);
+ addrmod1(cond | EOR | s, src1, dst, src2);
}
void Assembler::sub(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 2*B21 | s, src1, dst, src2);
+ addrmod1(cond | SUB | s, src1, dst, src2);
}
void Assembler::rsb(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 3*B21 | s, src1, dst, src2);
+ addrmod1(cond | RSB | s, src1, dst, src2);
}
void Assembler::add(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 4*B21 | s, src1, dst, src2);
+ addrmod1(cond | ADD | s, src1, dst, src2);
// Eliminate pattern: push(r), pop()
// str(src, MemOperand(sp, 4, NegPreIndex), al);
@@ -1061,7 +1010,7 @@
if (can_peephole_optimize(2) &&
// Pattern.
instr_at(pc_ - 1 * kInstrSize) == kPopInstruction &&
- (instr_at(pc_ - 2 * kInstrSize) & ~RdMask) == kPushRegPattern) {
+ (instr_at(pc_ - 2 * kInstrSize) & ~kRdMask) == kPushRegPattern) {
pc_ -= 2 * kInstrSize;
if (FLAG_print_peephole_optimization) {
PrintF("%x push(reg)/pop() eliminated\n", pc_offset());
@@ -1072,45 +1021,45 @@
void Assembler::adc(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 5*B21 | s, src1, dst, src2);
+ addrmod1(cond | ADC | s, src1, dst, src2);
}
void Assembler::sbc(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 6*B21 | s, src1, dst, src2);
+ addrmod1(cond | SBC | s, src1, dst, src2);
}
void Assembler::rsc(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 7*B21 | s, src1, dst, src2);
+ addrmod1(cond | RSC | s, src1, dst, src2);
}
void Assembler::tst(Register src1, const Operand& src2, Condition cond) {
- addrmod1(cond | 8*B21 | S, src1, r0, src2);
+ addrmod1(cond | TST | S, src1, r0, src2);
}
void Assembler::teq(Register src1, const Operand& src2, Condition cond) {
- addrmod1(cond | 9*B21 | S, src1, r0, src2);
+ addrmod1(cond | TEQ | S, src1, r0, src2);
}
void Assembler::cmp(Register src1, const Operand& src2, Condition cond) {
- addrmod1(cond | 10*B21 | S, src1, r0, src2);
+ addrmod1(cond | CMP | S, src1, r0, src2);
}
void Assembler::cmn(Register src1, const Operand& src2, Condition cond) {
- addrmod1(cond | 11*B21 | S, src1, r0, src2);
+ addrmod1(cond | CMN | S, src1, r0, src2);
}
void Assembler::orr(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 12*B21 | s, src1, dst, src2);
+ addrmod1(cond | ORR | s, src1, dst, src2);
}
@@ -1122,7 +1071,7 @@
// the mov instruction. They must be generated using nop(int/NopMarkerTypes)
// or MarkCode(int/NopMarkerTypes) pseudo instructions.
ASSERT(!(src.is_reg() && src.rm().is(dst) && s == LeaveCC && cond == al));
- addrmod1(cond | 13*B21 | s, r0, dst, src);
+ addrmod1(cond | MOV | s, r0, dst, src);
}
@@ -1139,12 +1088,12 @@
void Assembler::bic(Register dst, Register src1, const Operand& src2,
SBit s, Condition cond) {
- addrmod1(cond | 14*B21 | s, src1, dst, src2);
+ addrmod1(cond | BIC | s, src1, dst, src2);
}
void Assembler::mvn(Register dst, const Operand& src, SBit s, Condition cond) {
- addrmod1(cond | 15*B21 | s, r0, dst, src);
+ addrmod1(cond | MVN | s, r0, dst, src);
}
@@ -1222,7 +1171,7 @@
// v5 and above.
ASSERT(!dst.is(pc) && !src.is(pc));
emit(cond | B24 | B22 | B21 | 15*B16 | dst.code()*B12 |
- 15*B8 | B4 | src.code());
+ 15*B8 | CLZ | src.code());
}
@@ -1376,7 +1325,7 @@
Instr pop_instr = instr_at(pc_ - 1 * kInstrSize);
if (IsPush(push_instr) && IsPop(pop_instr)) {
- if ((pop_instr & kRdMask) != (push_instr & kRdMask)) {
+ if (Instruction::RdValue(pop_instr) != Instruction::RdValue(push_instr)) {
// For consecutive push and pop on different registers,
// we delete both the push & pop and insert a register move.
// push ry, pop rx --> mov rx, ry
@@ -1457,8 +1406,8 @@
IsPop(mem_read_instr)) {
if ((IsLdrRegFpOffset(ldr_instr) ||
IsLdrRegFpNegOffset(ldr_instr))) {
- if ((mem_write_instr & kRdMask) ==
- (mem_read_instr & kRdMask)) {
+ if (Instruction::RdValue(mem_write_instr) ==
+ Instruction::RdValue(mem_read_instr)) {
// Pattern: push & pop from/to same register,
// with a fp+offset ldr in between
//
@@ -1473,7 +1422,8 @@
// else
// ldr rz, [fp, #-24]
- if ((mem_write_instr & kRdMask) == (ldr_instr & kRdMask)) {
+ if (Instruction::RdValue(mem_write_instr) ==
+ Instruction::RdValue(ldr_instr)) {
pc_ -= 3 * kInstrSize;
} else {
pc_ -= 3 * kInstrSize;
@@ -1503,22 +1453,23 @@
// ldr rz, [fp, #-24]
Register reg_pushed, reg_popped;
- if ((mem_read_instr & kRdMask) == (ldr_instr & kRdMask)) {
+ if (Instruction::RdValue(mem_read_instr) ==
+ Instruction::RdValue(ldr_instr)) {
reg_pushed = GetRd(mem_write_instr);
reg_popped = GetRd(mem_read_instr);
pc_ -= 3 * kInstrSize;
mov(reg_popped, reg_pushed);
- } else if ((mem_write_instr & kRdMask)
- != (ldr_instr & kRdMask)) {
+ } else if (Instruction::RdValue(mem_write_instr) !=
+ Instruction::RdValue(ldr_instr)) {
reg_pushed = GetRd(mem_write_instr);
reg_popped = GetRd(mem_read_instr);
pc_ -= 3 * kInstrSize;
emit(ldr_instr);
mov(reg_popped, reg_pushed);
- } else if (((mem_read_instr & kRdMask)
- != (ldr_instr & kRdMask)) ||
- ((mem_write_instr & kRdMask)
- == (ldr_instr & kRdMask)) ) {
+ } else if ((Instruction::RdValue(mem_read_instr) !=
+ Instruction::RdValue(ldr_instr)) ||
+ (Instruction::RdValue(mem_write_instr) ==
+ Instruction::RdValue(ldr_instr))) {
reg_pushed = GetRd(mem_write_instr);
reg_popped = GetRd(mem_read_instr);
pc_ -= 3 * kInstrSize;
@@ -1640,18 +1591,14 @@
// enabling/disabling and a counter feature. See simulator-arm.h .
void Assembler::stop(const char* msg, Condition cond, int32_t code) {
#ifndef __arm__
- // See constants-arm.h SoftwareInterruptCodes. Unluckily the Assembler and
- // Simulator do not share constants declaration.
ASSERT(code >= kDefaultStopCode);
- static const uint32_t kStopInterruptCode = 1 << 23;
- static const uint32_t kMaxStopCode = kStopInterruptCode - 1;
// The Simulator will handle the stop instruction and get the message address.
// It expects to find the address just after the svc instruction.
BlockConstPoolFor(2);
if (code >= 0) {
- svc(kStopInterruptCode + code, cond);
+ svc(kStopCode + code, cond);
} else {
- svc(kStopInterruptCode + kMaxStopCode, cond);
+ svc(kStopCode + kMaxStopCode, cond);
}
emit(reinterpret_cast<Instr>(msg));
#else // def __arm__
@@ -1673,7 +1620,7 @@
void Assembler::bkpt(uint32_t imm16) { // v5 and above
ASSERT(is_uint16(imm16));
- emit(al | B24 | B21 | (imm16 >> 4)*B8 | 7*B4 | (imm16 & 0xf));
+ emit(al | B24 | B21 | (imm16 >> 4)*B8 | BKPT | (imm16 & 0xf));
}
@@ -1703,7 +1650,7 @@
CRegister crn,
CRegister crm,
int opcode_2) { // v5 and above
- cdp(coproc, opcode_1, crd, crn, crm, opcode_2, static_cast<Condition>(nv));
+ cdp(coproc, opcode_1, crd, crn, crm, opcode_2, kSpecialCondition);
}
@@ -1726,7 +1673,7 @@
CRegister crn,
CRegister crm,
int opcode_2) { // v5 and above
- mcr(coproc, opcode_1, rd, crn, crm, opcode_2, static_cast<Condition>(nv));
+ mcr(coproc, opcode_1, rd, crn, crm, opcode_2, kSpecialCondition);
}
@@ -1749,7 +1696,7 @@
CRegister crn,
CRegister crm,
int opcode_2) { // v5 and above
- mrc(coproc, opcode_1, rd, crn, crm, opcode_2, static_cast<Condition>(nv));
+ mrc(coproc, opcode_1, rd, crn, crm, opcode_2, kSpecialCondition);
}
@@ -1779,7 +1726,7 @@
CRegister crd,
const MemOperand& src,
LFlag l) { // v5 and above
- ldc(coproc, crd, src, l, static_cast<Condition>(nv));
+ ldc(coproc, crd, src, l, kSpecialCondition);
}
@@ -1788,7 +1735,7 @@
Register rn,
int option,
LFlag l) { // v5 and above
- ldc(coproc, crd, rn, option, l, static_cast<Condition>(nv));
+ ldc(coproc, crd, rn, option, l, kSpecialCondition);
}
@@ -1818,7 +1765,7 @@
coproc, CRegister crd,
const MemOperand& dst,
LFlag l) { // v5 and above
- stc(coproc, crd, dst, l, static_cast<Condition>(nv));
+ stc(coproc, crd, dst, l, kSpecialCondition);
}
@@ -1827,7 +1774,7 @@
Register rn,
int option,
LFlag l) { // v5 and above
- stc(coproc, crd, rn, option, l, static_cast<Condition>(nv));
+ stc(coproc, crd, rn, option, l, kSpecialCondition);
}
@@ -2637,7 +2584,7 @@
// Instruction to patch must be a ldr/str [pc, #offset].
// P and U set, B and W clear, Rn == pc, offset12 still 0.
- ASSERT((instr & (7*B25 | P | U | B | W | 15*B16 | Off12Mask)) ==
+ ASSERT((instr & (7*B25 | P | U | B | W | 15*B16 | kOff12Mask)) ==
(2*B25 | P | U | pc.code()*B16));
int delta = pc_ - rinfo.pc() - 8;
ASSERT(delta >= -4); // instr could be ldr pc, [pc, #-4] followed by targ32