| // Copyright 2012 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include <stdlib.h> |
| #include <math.h> |
| #include <cstdarg> |
| #include "v8.h" |
| |
| #if defined(V8_TARGET_ARCH_ARM) |
| |
| #include "disasm.h" |
| #include "assembler.h" |
| #include "arm/constants-arm.h" |
| #include "arm/simulator-arm.h" |
| |
| #if defined(USE_SIMULATOR) |
| |
| // Only build the simulator if not compiling for real ARM hardware. |
| namespace v8 { |
| namespace internal { |
| |
| // This macro provides a platform independent use of sscanf. The reason for |
| // SScanF not being implemented in a platform independent way through |
| // ::v8::internal::OS in the same way as SNPrintF is that the |
| // Windows C Run-Time Library does not provide vsscanf. |
| #define SScanF sscanf // NOLINT |
| |
| // The ArmDebugger class is used by the simulator while debugging simulated ARM |
| // code. |
| class ArmDebugger { |
| public: |
| explicit ArmDebugger(Simulator* sim) : sim_(sim) { } |
| ~ArmDebugger(); |
| |
| void Stop(Instruction* instr); |
| void Debug(); |
| |
| private: |
| static const Instr kBreakpointInstr = |
| (al | (7*B25) | (1*B24) | kBreakpoint); |
| static const Instr kNopInstr = (al | (13*B21)); |
| |
| Simulator* sim_; |
| |
| int32_t GetRegisterValue(int regnum); |
| double GetRegisterPairDoubleValue(int regnum); |
| double GetVFPDoubleRegisterValue(int regnum); |
| bool GetValue(const char* desc, int32_t* value); |
| bool GetVFPSingleValue(const char* desc, float* value); |
| bool GetVFPDoubleValue(const char* desc, double* value); |
| |
| // Set or delete a breakpoint. Returns true if successful. |
| bool SetBreakpoint(Instruction* breakpc); |
| bool DeleteBreakpoint(Instruction* breakpc); |
| |
| // Undo and redo all breakpoints. This is needed to bracket disassembly and |
| // execution to skip past breakpoints when run from the debugger. |
| void UndoBreakpoints(); |
| void RedoBreakpoints(); |
| }; |
| |
| |
| ArmDebugger::~ArmDebugger() { |
| } |
| |
| |
| |
| #ifdef GENERATED_CODE_COVERAGE |
| static FILE* coverage_log = NULL; |
| |
| |
| static void InitializeCoverage() { |
| char* file_name = getenv("V8_GENERATED_CODE_COVERAGE_LOG"); |
| if (file_name != NULL) { |
| coverage_log = fopen(file_name, "aw+"); |
| } |
| } |
| |
| |
| void ArmDebugger::Stop(Instruction* instr) { |
| // Get the stop code. |
| uint32_t code = instr->SvcValue() & kStopCodeMask; |
| // Retrieve the encoded address, which comes just after this stop. |
| char** msg_address = |
| reinterpret_cast<char**>(sim_->get_pc() + Instruction::kInstrSize); |
| char* msg = *msg_address; |
| ASSERT(msg != NULL); |
| |
| // Update this stop description. |
| if (isWatchedStop(code) && !watched_stops[code].desc) { |
| watched_stops[code].desc = msg; |
| } |
| |
| if (strlen(msg) > 0) { |
| if (coverage_log != NULL) { |
| fprintf(coverage_log, "%s\n", msg); |
| fflush(coverage_log); |
| } |
| // Overwrite the instruction and address with nops. |
| instr->SetInstructionBits(kNopInstr); |
| reinterpret_cast<Instruction*>(msg_address)->SetInstructionBits(kNopInstr); |
| } |
| sim_->set_pc(sim_->get_pc() + 2 * Instruction::kInstrSize); |
| } |
| |
| #else // ndef GENERATED_CODE_COVERAGE |
| |
| static void InitializeCoverage() { |
| } |
| |
| |
| void ArmDebugger::Stop(Instruction* instr) { |
| // Get the stop code. |
| uint32_t code = instr->SvcValue() & kStopCodeMask; |
| // Retrieve the encoded address, which comes just after this stop. |
| char* msg = *reinterpret_cast<char**>(sim_->get_pc() |
| + Instruction::kInstrSize); |
| // Update this stop description. |
| if (sim_->isWatchedStop(code) && !sim_->watched_stops[code].desc) { |
| sim_->watched_stops[code].desc = msg; |
| } |
| // Print the stop message and code if it is not the default code. |
| if (code != kMaxStopCode) { |
| PrintF("Simulator hit stop %u: %s\n", code, msg); |
| } else { |
| PrintF("Simulator hit %s\n", msg); |
| } |
| sim_->set_pc(sim_->get_pc() + 2 * Instruction::kInstrSize); |
| Debug(); |
| } |
| #endif |
| |
| |
| int32_t ArmDebugger::GetRegisterValue(int regnum) { |
| if (regnum == kPCRegister) { |
| return sim_->get_pc(); |
| } else { |
| return sim_->get_register(regnum); |
| } |
| } |
| |
| |
| double ArmDebugger::GetRegisterPairDoubleValue(int regnum) { |
| return sim_->get_double_from_register_pair(regnum); |
| } |
| |
| |
| double ArmDebugger::GetVFPDoubleRegisterValue(int regnum) { |
| return sim_->get_double_from_d_register(regnum); |
| } |
| |
| |
| bool ArmDebugger::GetValue(const char* desc, int32_t* value) { |
| int regnum = Registers::Number(desc); |
| if (regnum != kNoRegister) { |
| *value = GetRegisterValue(regnum); |
| return true; |
| } else { |
| if (strncmp(desc, "0x", 2) == 0) { |
| return SScanF(desc + 2, "%x", reinterpret_cast<uint32_t*>(value)) == 1; |
| } else { |
| return SScanF(desc, "%u", reinterpret_cast<uint32_t*>(value)) == 1; |
| } |
| } |
| return false; |
| } |
| |
| |
| bool ArmDebugger::GetVFPSingleValue(const char* desc, float* value) { |
| bool is_double; |
| int regnum = VFPRegisters::Number(desc, &is_double); |
| if (regnum != kNoRegister && !is_double) { |
| *value = sim_->get_float_from_s_register(regnum); |
| return true; |
| } |
| return false; |
| } |
| |
| |
| bool ArmDebugger::GetVFPDoubleValue(const char* desc, double* value) { |
| bool is_double; |
| int regnum = VFPRegisters::Number(desc, &is_double); |
| if (regnum != kNoRegister && is_double) { |
| *value = sim_->get_double_from_d_register(regnum); |
| return true; |
| } |
| return false; |
| } |
| |
| |
| bool ArmDebugger::SetBreakpoint(Instruction* breakpc) { |
| // Check if a breakpoint can be set. If not return without any side-effects. |
| if (sim_->break_pc_ != NULL) { |
| return false; |
| } |
| |
| // Set the breakpoint. |
| sim_->break_pc_ = breakpc; |
| sim_->break_instr_ = breakpc->InstructionBits(); |
| // Not setting the breakpoint instruction in the code itself. It will be set |
| // when the debugger shell continues. |
| return true; |
| } |
| |
| |
| bool ArmDebugger::DeleteBreakpoint(Instruction* breakpc) { |
| if (sim_->break_pc_ != NULL) { |
| sim_->break_pc_->SetInstructionBits(sim_->break_instr_); |
| } |
| |
| sim_->break_pc_ = NULL; |
| sim_->break_instr_ = 0; |
| return true; |
| } |
| |
| |
| void ArmDebugger::UndoBreakpoints() { |
| if (sim_->break_pc_ != NULL) { |
| sim_->break_pc_->SetInstructionBits(sim_->break_instr_); |
| } |
| } |
| |
| |
| void ArmDebugger::RedoBreakpoints() { |
| if (sim_->break_pc_ != NULL) { |
| sim_->break_pc_->SetInstructionBits(kBreakpointInstr); |
| } |
| } |
| |
| |
| void ArmDebugger::Debug() { |
| intptr_t last_pc = -1; |
| bool done = false; |
| |
| #define COMMAND_SIZE 63 |
| #define ARG_SIZE 255 |
| |
| #define STR(a) #a |
| #define XSTR(a) STR(a) |
| |
| char cmd[COMMAND_SIZE + 1]; |
| char arg1[ARG_SIZE + 1]; |
| char arg2[ARG_SIZE + 1]; |
| char* argv[3] = { cmd, arg1, arg2 }; |
| |
| // make sure to have a proper terminating character if reaching the limit |
| cmd[COMMAND_SIZE] = 0; |
| arg1[ARG_SIZE] = 0; |
| arg2[ARG_SIZE] = 0; |
| |
| // Undo all set breakpoints while running in the debugger shell. This will |
| // make them invisible to all commands. |
| UndoBreakpoints(); |
| |
| while (!done && !sim_->has_bad_pc()) { |
| if (last_pc != sim_->get_pc()) { |
| disasm::NameConverter converter; |
| disasm::Disassembler dasm(converter); |
| // use a reasonably large buffer |
| v8::internal::EmbeddedVector<char, 256> buffer; |
| dasm.InstructionDecode(buffer, |
| reinterpret_cast<byte*>(sim_->get_pc())); |
| PrintF(" 0x%08x %s\n", sim_->get_pc(), buffer.start()); |
| last_pc = sim_->get_pc(); |
| } |
| char* line = ReadLine("sim> "); |
| if (line == NULL) { |
| break; |
| } else { |
| char* last_input = sim_->last_debugger_input(); |
| if (strcmp(line, "\n") == 0 && last_input != NULL) { |
| line = last_input; |
| } else { |
| // Ownership is transferred to sim_; |
| sim_->set_last_debugger_input(line); |
| } |
| // Use sscanf to parse the individual parts of the command line. At the |
| // moment no command expects more than two parameters. |
| int argc = SScanF(line, |
| "%" XSTR(COMMAND_SIZE) "s " |
| "%" XSTR(ARG_SIZE) "s " |
| "%" XSTR(ARG_SIZE) "s", |
| cmd, arg1, arg2); |
| if ((strcmp(cmd, "si") == 0) || (strcmp(cmd, "stepi") == 0)) { |
| sim_->InstructionDecode(reinterpret_cast<Instruction*>(sim_->get_pc())); |
| } else if ((strcmp(cmd, "c") == 0) || (strcmp(cmd, "cont") == 0)) { |
| // Execute the one instruction we broke at with breakpoints disabled. |
| sim_->InstructionDecode(reinterpret_cast<Instruction*>(sim_->get_pc())); |
| // Leave the debugger shell. |
| done = true; |
| } else if ((strcmp(cmd, "p") == 0) || (strcmp(cmd, "print") == 0)) { |
| if (argc == 2 || (argc == 3 && strcmp(arg2, "fp") == 0)) { |
| int32_t value; |
| float svalue; |
| double dvalue; |
| if (strcmp(arg1, "all") == 0) { |
| for (int i = 0; i < kNumRegisters; i++) { |
| value = GetRegisterValue(i); |
| PrintF("%3s: 0x%08x %10d", Registers::Name(i), value, value); |
| if ((argc == 3 && strcmp(arg2, "fp") == 0) && |
| i < 8 && |
| (i % 2) == 0) { |
| dvalue = GetRegisterPairDoubleValue(i); |
| PrintF(" (%f)\n", dvalue); |
| } else { |
| PrintF("\n"); |
| } |
| } |
| for (int i = 0; i < kNumVFPDoubleRegisters; i++) { |
| dvalue = GetVFPDoubleRegisterValue(i); |
| uint64_t as_words = BitCast<uint64_t>(dvalue); |
| PrintF("%3s: %f 0x%08x %08x\n", |
| VFPRegisters::Name(i, true), |
| dvalue, |
| static_cast<uint32_t>(as_words >> 32), |
| static_cast<uint32_t>(as_words & 0xffffffff)); |
| } |
| } else { |
| if (GetValue(arg1, &value)) { |
| PrintF("%s: 0x%08x %d \n", arg1, value, value); |
| } else if (GetVFPSingleValue(arg1, &svalue)) { |
| uint32_t as_word = BitCast<uint32_t>(svalue); |
| PrintF("%s: %f 0x%08x\n", arg1, svalue, as_word); |
| } else if (GetVFPDoubleValue(arg1, &dvalue)) { |
| uint64_t as_words = BitCast<uint64_t>(dvalue); |
| PrintF("%s: %f 0x%08x %08x\n", |
| arg1, |
| dvalue, |
| static_cast<uint32_t>(as_words >> 32), |
| static_cast<uint32_t>(as_words & 0xffffffff)); |
| } else { |
| PrintF("%s unrecognized\n", arg1); |
| } |
| } |
| } else { |
| PrintF("print <register>\n"); |
| } |
| } else if ((strcmp(cmd, "po") == 0) |
| || (strcmp(cmd, "printobject") == 0)) { |
| if (argc == 2) { |
| int32_t value; |
| if (GetValue(arg1, &value)) { |
| Object* obj = reinterpret_cast<Object*>(value); |
| PrintF("%s: \n", arg1); |
| #ifdef DEBUG |
| obj->PrintLn(); |
| #else |
| obj->ShortPrint(); |
| PrintF("\n"); |
| #endif |
| } else { |
| PrintF("%s unrecognized\n", arg1); |
| } |
| } else { |
| PrintF("printobject <value>\n"); |
| } |
| } else if (strcmp(cmd, "stack") == 0 || strcmp(cmd, "mem") == 0) { |
| int32_t* cur = NULL; |
| int32_t* end = NULL; |
| int next_arg = 1; |
| |
| if (strcmp(cmd, "stack") == 0) { |
| cur = reinterpret_cast<int32_t*>(sim_->get_register(Simulator::sp)); |
| } else { // "mem" |
| int32_t value; |
| if (!GetValue(arg1, &value)) { |
| PrintF("%s unrecognized\n", arg1); |
| continue; |
| } |
| cur = reinterpret_cast<int32_t*>(value); |
| next_arg++; |
| } |
| |
| int32_t words; |
| if (argc == next_arg) { |
| words = 10; |
| } else if (argc == next_arg + 1) { |
| if (!GetValue(argv[next_arg], &words)) { |
| words = 10; |
| } |
| } |
| end = cur + words; |
| |
| while (cur < end) { |
| PrintF(" 0x%08x: 0x%08x %10d", |
| reinterpret_cast<intptr_t>(cur), *cur, *cur); |
| HeapObject* obj = reinterpret_cast<HeapObject*>(*cur); |
| int value = *cur; |
| Heap* current_heap = v8::internal::Isolate::Current()->heap(); |
| if (current_heap->Contains(obj) || ((value & 1) == 0)) { |
| PrintF(" ("); |
| if ((value & 1) == 0) { |
| PrintF("smi %d", value / 2); |
| } else { |
| obj->ShortPrint(); |
| } |
| PrintF(")"); |
| } |
| PrintF("\n"); |
| cur++; |
| } |
| } else if (strcmp(cmd, "disasm") == 0 || strcmp(cmd, "di") == 0) { |
| disasm::NameConverter converter; |
| disasm::Disassembler dasm(converter); |
| // use a reasonably large buffer |
| v8::internal::EmbeddedVector<char, 256> buffer; |
| |
| byte* prev = NULL; |
| byte* cur = NULL; |
| byte* end = NULL; |
| |
| if (argc == 1) { |
| cur = reinterpret_cast<byte*>(sim_->get_pc()); |
| end = cur + (10 * Instruction::kInstrSize); |
| } else if (argc == 2) { |
| int regnum = Registers::Number(arg1); |
| if (regnum != kNoRegister || strncmp(arg1, "0x", 2) == 0) { |
| // The argument is an address or a register name. |
| int32_t value; |
| if (GetValue(arg1, &value)) { |
| cur = reinterpret_cast<byte*>(value); |
| // Disassemble 10 instructions at <arg1>. |
| end = cur + (10 * Instruction::kInstrSize); |
| } |
| } else { |
| // The argument is the number of instructions. |
| int32_t value; |
| if (GetValue(arg1, &value)) { |
| cur = reinterpret_cast<byte*>(sim_->get_pc()); |
| // Disassemble <arg1> instructions. |
| end = cur + (value * Instruction::kInstrSize); |
| } |
| } |
| } else { |
| int32_t value1; |
| int32_t value2; |
| if (GetValue(arg1, &value1) && GetValue(arg2, &value2)) { |
| cur = reinterpret_cast<byte*>(value1); |
| end = cur + (value2 * Instruction::kInstrSize); |
| } |
| } |
| |
| while (cur < end) { |
| prev = cur; |
| cur += dasm.InstructionDecode(buffer, cur); |
| PrintF(" 0x%08x %s\n", |
| reinterpret_cast<intptr_t>(prev), buffer.start()); |
| } |
| } else if (strcmp(cmd, "gdb") == 0) { |
| PrintF("relinquishing control to gdb\n"); |
| v8::internal::OS::DebugBreak(); |
| PrintF("regaining control from gdb\n"); |
| } else if (strcmp(cmd, "break") == 0) { |
| if (argc == 2) { |
| int32_t value; |
| if (GetValue(arg1, &value)) { |
| if (!SetBreakpoint(reinterpret_cast<Instruction*>(value))) { |
| PrintF("setting breakpoint failed\n"); |
| } |
| } else { |
| PrintF("%s unrecognized\n", arg1); |
| } |
| } else { |
| PrintF("break <address>\n"); |
| } |
| } else if (strcmp(cmd, "del") == 0) { |
| if (!DeleteBreakpoint(NULL)) { |
| PrintF("deleting breakpoint failed\n"); |
| } |
| } else if (strcmp(cmd, "flags") == 0) { |
| PrintF("N flag: %d; ", sim_->n_flag_); |
| PrintF("Z flag: %d; ", sim_->z_flag_); |
| PrintF("C flag: %d; ", sim_->c_flag_); |
| PrintF("V flag: %d\n", sim_->v_flag_); |
| PrintF("INVALID OP flag: %d; ", sim_->inv_op_vfp_flag_); |
| PrintF("DIV BY ZERO flag: %d; ", sim_->div_zero_vfp_flag_); |
| PrintF("OVERFLOW flag: %d; ", sim_->overflow_vfp_flag_); |
| PrintF("UNDERFLOW flag: %d; ", sim_->underflow_vfp_flag_); |
| PrintF("INEXACT flag: %d;\n", sim_->inexact_vfp_flag_); |
| } else if (strcmp(cmd, "stop") == 0) { |
| int32_t value; |
| intptr_t stop_pc = sim_->get_pc() - 2 * Instruction::kInstrSize; |
| Instruction* stop_instr = reinterpret_cast<Instruction*>(stop_pc); |
| Instruction* msg_address = |
| reinterpret_cast<Instruction*>(stop_pc + Instruction::kInstrSize); |
| if ((argc == 2) && (strcmp(arg1, "unstop") == 0)) { |
| // Remove the current stop. |
| if (sim_->isStopInstruction(stop_instr)) { |
| stop_instr->SetInstructionBits(kNopInstr); |
| msg_address->SetInstructionBits(kNopInstr); |
| } else { |
| PrintF("Not at debugger stop.\n"); |
| } |
| } else if (argc == 3) { |
| // Print information about all/the specified breakpoint(s). |
| if (strcmp(arg1, "info") == 0) { |
| if (strcmp(arg2, "all") == 0) { |
| PrintF("Stop information:\n"); |
| for (uint32_t i = 0; i < sim_->kNumOfWatchedStops; i++) { |
| sim_->PrintStopInfo(i); |
| } |
| } else if (GetValue(arg2, &value)) { |
| sim_->PrintStopInfo(value); |
| } else { |
| PrintF("Unrecognized argument.\n"); |
| } |
| } else if (strcmp(arg1, "enable") == 0) { |
| // Enable all/the specified breakpoint(s). |
| if (strcmp(arg2, "all") == 0) { |
| for (uint32_t i = 0; i < sim_->kNumOfWatchedStops; i++) { |
| sim_->EnableStop(i); |
| } |
| } else if (GetValue(arg2, &value)) { |
| sim_->EnableStop(value); |
| } else { |
| PrintF("Unrecognized argument.\n"); |
| } |
| } else if (strcmp(arg1, "disable") == 0) { |
| // Disable all/the specified breakpoint(s). |
| if (strcmp(arg2, "all") == 0) { |
| for (uint32_t i = 0; i < sim_->kNumOfWatchedStops; i++) { |
| sim_->DisableStop(i); |
| } |
| } else if (GetValue(arg2, &value)) { |
| sim_->DisableStop(value); |
| } else { |
| PrintF("Unrecognized argument.\n"); |
| } |
| } |
| } else { |
| PrintF("Wrong usage. Use help command for more information.\n"); |
| } |
| } else if ((strcmp(cmd, "t") == 0) || strcmp(cmd, "trace") == 0) { |
| ::v8::internal::FLAG_trace_sim = !::v8::internal::FLAG_trace_sim; |
| PrintF("Trace of executed instructions is %s\n", |
| ::v8::internal::FLAG_trace_sim ? "on" : "off"); |
| } else if ((strcmp(cmd, "h") == 0) || (strcmp(cmd, "help") == 0)) { |
| PrintF("cont\n"); |
| PrintF(" continue execution (alias 'c')\n"); |
| PrintF("stepi\n"); |
| PrintF(" step one instruction (alias 'si')\n"); |
| PrintF("print <register>\n"); |
| PrintF(" print register content (alias 'p')\n"); |
| PrintF(" use register name 'all' to print all registers\n"); |
| PrintF(" add argument 'fp' to print register pair double values\n"); |
| PrintF("printobject <register>\n"); |
| PrintF(" print an object from a register (alias 'po')\n"); |
| PrintF("flags\n"); |
| PrintF(" print flags\n"); |
| PrintF("stack [<words>]\n"); |
| PrintF(" dump stack content, default dump 10 words)\n"); |
| PrintF("mem <address> [<words>]\n"); |
| PrintF(" dump memory content, default dump 10 words)\n"); |
| PrintF("disasm [<instructions>]\n"); |
| PrintF("disasm [<address/register>]\n"); |
| PrintF("disasm [[<address/register>] <instructions>]\n"); |
| PrintF(" disassemble code, default is 10 instructions\n"); |
| PrintF(" from pc (alias 'di')\n"); |
| PrintF("gdb\n"); |
| PrintF(" enter gdb\n"); |
| PrintF("break <address>\n"); |
| PrintF(" set a break point on the address\n"); |
| PrintF("del\n"); |
| PrintF(" delete the breakpoint\n"); |
| PrintF("trace (alias 't')\n"); |
| PrintF(" toogle the tracing of all executed statements\n"); |
| PrintF("stop feature:\n"); |
| PrintF(" Description:\n"); |
| PrintF(" Stops are debug instructions inserted by\n"); |
| PrintF(" the Assembler::stop() function.\n"); |
| PrintF(" When hitting a stop, the Simulator will\n"); |
| PrintF(" stop and and give control to the ArmDebugger.\n"); |
| PrintF(" The first %d stop codes are watched:\n", |
| Simulator::kNumOfWatchedStops); |
| PrintF(" - They can be enabled / disabled: the Simulator\n"); |
| PrintF(" will / won't stop when hitting them.\n"); |
| PrintF(" - The Simulator keeps track of how many times they \n"); |
| PrintF(" are met. (See the info command.) Going over a\n"); |
| PrintF(" disabled stop still increases its counter. \n"); |
| PrintF(" Commands:\n"); |
| PrintF(" stop info all/<code> : print infos about number <code>\n"); |
| PrintF(" or all stop(s).\n"); |
| PrintF(" stop enable/disable all/<code> : enables / disables\n"); |
| PrintF(" all or number <code> stop(s)\n"); |
| PrintF(" stop unstop\n"); |
| PrintF(" ignore the stop instruction at the current location\n"); |
| PrintF(" from now on\n"); |
| } else { |
| PrintF("Unknown command: %s\n", cmd); |
| } |
| } |
| } |
| |
| // Add all the breakpoints back to stop execution and enter the debugger |
| // shell when hit. |
| RedoBreakpoints(); |
| |
| #undef COMMAND_SIZE |
| #undef ARG_SIZE |
| |
| #undef STR |
| #undef XSTR |
| } |
| |
| |
| static bool ICacheMatch(void* one, void* two) { |
| ASSERT((reinterpret_cast<intptr_t>(one) & CachePage::kPageMask) == 0); |
| ASSERT((reinterpret_cast<intptr_t>(two) & CachePage::kPageMask) == 0); |
| return one == two; |
| } |
| |
| |
| static uint32_t ICacheHash(void* key) { |
| return static_cast<uint32_t>(reinterpret_cast<uintptr_t>(key)) >> 2; |
| } |
| |
| |
| static bool AllOnOnePage(uintptr_t start, int size) { |
| intptr_t start_page = (start & ~CachePage::kPageMask); |
| intptr_t end_page = ((start + size) & ~CachePage::kPageMask); |
| return start_page == end_page; |
| } |
| |
| |
| void Simulator::set_last_debugger_input(char* input) { |
| DeleteArray(last_debugger_input_); |
| last_debugger_input_ = input; |
| } |
| |
| |
| void Simulator::FlushICache(v8::internal::HashMap* i_cache, |
| void* start_addr, |
| size_t size) { |
| intptr_t start = reinterpret_cast<intptr_t>(start_addr); |
| int intra_line = (start & CachePage::kLineMask); |
| start -= intra_line; |
| size += intra_line; |
| size = ((size - 1) | CachePage::kLineMask) + 1; |
| int offset = (start & CachePage::kPageMask); |
| while (!AllOnOnePage(start, size - 1)) { |
| int bytes_to_flush = CachePage::kPageSize - offset; |
| FlushOnePage(i_cache, start, bytes_to_flush); |
| start += bytes_to_flush; |
| size -= bytes_to_flush; |
| ASSERT_EQ(0, start & CachePage::kPageMask); |
| offset = 0; |
| } |
| if (size != 0) { |
| FlushOnePage(i_cache, start, size); |
| } |
| } |
| |
| |
| CachePage* Simulator::GetCachePage(v8::internal::HashMap* i_cache, void* page) { |
| v8::internal::HashMap::Entry* entry = i_cache->Lookup(page, |
| ICacheHash(page), |
| true); |
| if (entry->value == NULL) { |
| CachePage* new_page = new CachePage(); |
| entry->value = new_page; |
| } |
| return reinterpret_cast<CachePage*>(entry->value); |
| } |
| |
| |
| // Flush from start up to and not including start + size. |
| void Simulator::FlushOnePage(v8::internal::HashMap* i_cache, |
| intptr_t start, |
| int size) { |
| ASSERT(size <= CachePage::kPageSize); |
| ASSERT(AllOnOnePage(start, size - 1)); |
| ASSERT((start & CachePage::kLineMask) == 0); |
| ASSERT((size & CachePage::kLineMask) == 0); |
| void* page = reinterpret_cast<void*>(start & (~CachePage::kPageMask)); |
| int offset = (start & CachePage::kPageMask); |
| CachePage* cache_page = GetCachePage(i_cache, page); |
| char* valid_bytemap = cache_page->ValidityByte(offset); |
| memset(valid_bytemap, CachePage::LINE_INVALID, size >> CachePage::kLineShift); |
| } |
| |
| |
| void Simulator::CheckICache(v8::internal::HashMap* i_cache, |
| Instruction* instr) { |
| intptr_t address = reinterpret_cast<intptr_t>(instr); |
| void* page = reinterpret_cast<void*>(address & (~CachePage::kPageMask)); |
| void* line = reinterpret_cast<void*>(address & (~CachePage::kLineMask)); |
| int offset = (address & CachePage::kPageMask); |
| CachePage* cache_page = GetCachePage(i_cache, page); |
| char* cache_valid_byte = cache_page->ValidityByte(offset); |
| bool cache_hit = (*cache_valid_byte == CachePage::LINE_VALID); |
| char* cached_line = cache_page->CachedData(offset & ~CachePage::kLineMask); |
| if (cache_hit) { |
| // Check that the data in memory matches the contents of the I-cache. |
| CHECK(memcmp(reinterpret_cast<void*>(instr), |
| cache_page->CachedData(offset), |
| Instruction::kInstrSize) == 0); |
| } else { |
| // Cache miss. Load memory into the cache. |
| memcpy(cached_line, line, CachePage::kLineLength); |
| *cache_valid_byte = CachePage::LINE_VALID; |
| } |
| } |
| |
| |
| void Simulator::Initialize(Isolate* isolate) { |
| if (isolate->simulator_initialized()) return; |
| isolate->set_simulator_initialized(true); |
| ::v8::internal::ExternalReference::set_redirector(isolate, |
| &RedirectExternalReference); |
| } |
| |
| |
| Simulator::Simulator(Isolate* isolate) : isolate_(isolate) { |
| i_cache_ = isolate_->simulator_i_cache(); |
| if (i_cache_ == NULL) { |
| i_cache_ = new v8::internal::HashMap(&ICacheMatch); |
| isolate_->set_simulator_i_cache(i_cache_); |
| } |
| Initialize(isolate); |
| // Set up simulator support first. Some of this information is needed to |
| // setup the architecture state. |
| size_t stack_size = 1 * 1024*1024; // allocate 1MB for stack |
| stack_ = reinterpret_cast<char*>(malloc(stack_size)); |
| pc_modified_ = false; |
| icount_ = 0; |
| break_pc_ = NULL; |
| break_instr_ = 0; |
| |
| // Set up architecture state. |
| // All registers are initialized to zero to start with. |
| for (int i = 0; i < num_registers; i++) { |
| registers_[i] = 0; |
| } |
| n_flag_ = false; |
| z_flag_ = false; |
| c_flag_ = false; |
| v_flag_ = false; |
| |
| // Initializing VFP registers. |
| // All registers are initialized to zero to start with |
| // even though s_registers_ & d_registers_ share the same |
| // physical registers in the target. |
| for (int i = 0; i < num_s_registers; i++) { |
| vfp_register[i] = 0; |
| } |
| n_flag_FPSCR_ = false; |
| z_flag_FPSCR_ = false; |
| c_flag_FPSCR_ = false; |
| v_flag_FPSCR_ = false; |
| FPSCR_rounding_mode_ = RZ; |
| |
| inv_op_vfp_flag_ = false; |
| div_zero_vfp_flag_ = false; |
| overflow_vfp_flag_ = false; |
| underflow_vfp_flag_ = false; |
| inexact_vfp_flag_ = false; |
| |
| // The sp is initialized to point to the bottom (high address) of the |
| // allocated stack area. To be safe in potential stack underflows we leave |
| // some buffer below. |
| registers_[sp] = reinterpret_cast<int32_t>(stack_) + stack_size - 64; |
| // The lr and pc are initialized to a known bad value that will cause an |
| // access violation if the simulator ever tries to execute it. |
| registers_[pc] = bad_lr; |
| registers_[lr] = bad_lr; |
| InitializeCoverage(); |
| |
| last_debugger_input_ = NULL; |
| } |
| |
| |
| // When the generated code calls an external reference we need to catch that in |
| // the simulator. The external reference will be a function compiled for the |
| // host architecture. We need to call that function instead of trying to |
| // execute it with the simulator. We do that by redirecting the external |
| // reference to a svc (Supervisor Call) instruction that is handled by |
| // the simulator. We write the original destination of the jump just at a known |
| // offset from the svc instruction so the simulator knows what to call. |
| class Redirection { |
| public: |
| Redirection(void* external_function, ExternalReference::Type type) |
| : external_function_(external_function), |
| swi_instruction_(al | (0xf*B24) | kCallRtRedirected), |
| type_(type), |
| next_(NULL) { |
| Isolate* isolate = Isolate::Current(); |
| next_ = isolate->simulator_redirection(); |
| Simulator::current(isolate)-> |
| FlushICache(isolate->simulator_i_cache(), |
| reinterpret_cast<void*>(&swi_instruction_), |
| Instruction::kInstrSize); |
| isolate->set_simulator_redirection(this); |
| } |
| |
| void* address_of_swi_instruction() { |
| return reinterpret_cast<void*>(&swi_instruction_); |
| } |
| |
| void* external_function() { return external_function_; } |
| ExternalReference::Type type() { return type_; } |
| |
| static Redirection* Get(void* external_function, |
| ExternalReference::Type type) { |
| Isolate* isolate = Isolate::Current(); |
| Redirection* current = isolate->simulator_redirection(); |
| for (; current != NULL; current = current->next_) { |
| if (current->external_function_ == external_function) return current; |
| } |
| return new Redirection(external_function, type); |
| } |
| |
| static Redirection* FromSwiInstruction(Instruction* swi_instruction) { |
| char* addr_of_swi = reinterpret_cast<char*>(swi_instruction); |
| char* addr_of_redirection = |
| addr_of_swi - OFFSET_OF(Redirection, swi_instruction_); |
| return reinterpret_cast<Redirection*>(addr_of_redirection); |
| } |
| |
| private: |
| void* external_function_; |
| uint32_t swi_instruction_; |
| ExternalReference::Type type_; |
| Redirection* next_; |
| }; |
| |
| |
| void* Simulator::RedirectExternalReference(void* external_function, |
| ExternalReference::Type type) { |
| Redirection* redirection = Redirection::Get(external_function, type); |
| return redirection->address_of_swi_instruction(); |
| } |
| |
| |
| // Get the active Simulator for the current thread. |
| Simulator* Simulator::current(Isolate* isolate) { |
| v8::internal::Isolate::PerIsolateThreadData* isolate_data = |
| isolate->FindOrAllocatePerThreadDataForThisThread(); |
| ASSERT(isolate_data != NULL); |
| |
| Simulator* sim = isolate_data->simulator(); |
| if (sim == NULL) { |
| // TODO(146): delete the simulator object when a thread/isolate goes away. |
| sim = new Simulator(isolate); |
| isolate_data->set_simulator(sim); |
| } |
| return sim; |
| } |
| |
| |
| // Sets the register in the architecture state. It will also deal with updating |
| // Simulator internal state for special registers such as PC. |
| void Simulator::set_register(int reg, int32_t value) { |
| ASSERT((reg >= 0) && (reg < num_registers)); |
| if (reg == pc) { |
| pc_modified_ = true; |
| } |
| registers_[reg] = value; |
| } |
| |
| |
| // Get the register from the architecture state. This function does handle |
| // the special case of accessing the PC register. |
| int32_t Simulator::get_register(int reg) const { |
| ASSERT((reg >= 0) && (reg < num_registers)); |
| // Stupid code added to avoid bug in GCC. |
| // See: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43949 |
| if (reg >= num_registers) return 0; |
| // End stupid code. |
| return registers_[reg] + ((reg == pc) ? Instruction::kPCReadOffset : 0); |
| } |
| |
| |
| double Simulator::get_double_from_register_pair(int reg) { |
| ASSERT((reg >= 0) && (reg < num_registers) && ((reg % 2) == 0)); |
| |
| double dm_val = 0.0; |
| // Read the bits from the unsigned integer register_[] array |
| // into the double precision floating point value and return it. |
| char buffer[2 * sizeof(vfp_register[0])]; |
| memcpy(buffer, ®isters_[reg], 2 * sizeof(registers_[0])); |
| memcpy(&dm_val, buffer, 2 * sizeof(registers_[0])); |
| return(dm_val); |
| } |
| |
| |
| void Simulator::set_dw_register(int dreg, const int* dbl) { |
| ASSERT((dreg >= 0) && (dreg < num_d_registers)); |
| registers_[dreg] = dbl[0]; |
| registers_[dreg + 1] = dbl[1]; |
| } |
| |
| |
| // Raw access to the PC register. |
| void Simulator::set_pc(int32_t value) { |
| pc_modified_ = true; |
| registers_[pc] = value; |
| } |
| |
| |
| bool Simulator::has_bad_pc() const { |
| return ((registers_[pc] == bad_lr) || (registers_[pc] == end_sim_pc)); |
| } |
| |
| |
| // Raw access to the PC register without the special adjustment when reading. |
| int32_t Simulator::get_pc() const { |
| return registers_[pc]; |
| } |
| |
| |
| // Getting from and setting into VFP registers. |
| void Simulator::set_s_register(int sreg, unsigned int value) { |
| ASSERT((sreg >= 0) && (sreg < num_s_registers)); |
| vfp_register[sreg] = value; |
| } |
| |
| |
| unsigned int Simulator::get_s_register(int sreg) const { |
| ASSERT((sreg >= 0) && (sreg < num_s_registers)); |
| return vfp_register[sreg]; |
| } |
| |
| |
| void Simulator::set_s_register_from_float(int sreg, const float flt) { |
| ASSERT((sreg >= 0) && (sreg < num_s_registers)); |
| // Read the bits from the single precision floating point value |
| // into the unsigned integer element of vfp_register[] given by index=sreg. |
| char buffer[sizeof(vfp_register[0])]; |
| memcpy(buffer, &flt, sizeof(vfp_register[0])); |
| memcpy(&vfp_register[sreg], buffer, sizeof(vfp_register[0])); |
| } |
| |
| |
| void Simulator::set_s_register_from_sinteger(int sreg, const int sint) { |
| ASSERT((sreg >= 0) && (sreg < num_s_registers)); |
| // Read the bits from the integer value into the unsigned integer element of |
| // vfp_register[] given by index=sreg. |
| char buffer[sizeof(vfp_register[0])]; |
| memcpy(buffer, &sint, sizeof(vfp_register[0])); |
| memcpy(&vfp_register[sreg], buffer, sizeof(vfp_register[0])); |
| } |
| |
| |
| void Simulator::set_d_register_from_double(int dreg, const double& dbl) { |
| ASSERT((dreg >= 0) && (dreg < num_d_registers)); |
| // Read the bits from the double precision floating point value into the two |
| // consecutive unsigned integer elements of vfp_register[] given by index |
| // 2*sreg and 2*sreg+1. |
| char buffer[2 * sizeof(vfp_register[0])]; |
| memcpy(buffer, &dbl, 2 * sizeof(vfp_register[0])); |
| memcpy(&vfp_register[dreg * 2], buffer, 2 * sizeof(vfp_register[0])); |
| } |
| |
| |
| float Simulator::get_float_from_s_register(int sreg) { |
| ASSERT((sreg >= 0) && (sreg < num_s_registers)); |
| |
| float sm_val = 0.0; |
| // Read the bits from the unsigned integer vfp_register[] array |
| // into the single precision floating point value and return it. |
| char buffer[sizeof(vfp_register[0])]; |
| memcpy(buffer, &vfp_register[sreg], sizeof(vfp_register[0])); |
| memcpy(&sm_val, buffer, sizeof(vfp_register[0])); |
| return(sm_val); |
| } |
| |
| |
| int Simulator::get_sinteger_from_s_register(int sreg) { |
| ASSERT((sreg >= 0) && (sreg < num_s_registers)); |
| |
| int sm_val = 0; |
| // Read the bits from the unsigned integer vfp_register[] array |
| // into the single precision floating point value and return it. |
| char buffer[sizeof(vfp_register[0])]; |
| memcpy(buffer, &vfp_register[sreg], sizeof(vfp_register[0])); |
| memcpy(&sm_val, buffer, sizeof(vfp_register[0])); |
| return(sm_val); |
| } |
| |
| |
| double Simulator::get_double_from_d_register(int dreg) { |
| ASSERT((dreg >= 0) && (dreg < num_d_registers)); |
| |
| double dm_val = 0.0; |
| // Read the bits from the unsigned integer vfp_register[] array |
| // into the double precision floating point value and return it. |
| char buffer[2 * sizeof(vfp_register[0])]; |
| memcpy(buffer, &vfp_register[2 * dreg], 2 * sizeof(vfp_register[0])); |
| memcpy(&dm_val, buffer, 2 * sizeof(vfp_register[0])); |
| return(dm_val); |
| } |
| |
| |
| // For use in calls that take two double values, constructed either |
| // from r0-r3 or d0 and d1. |
| void Simulator::GetFpArgs(double* x, double* y) { |
| if (use_eabi_hardfloat()) { |
| *x = vfp_register[0]; |
| *y = vfp_register[1]; |
| } else { |
| // We use a char buffer to get around the strict-aliasing rules which |
| // otherwise allow the compiler to optimize away the copy. |
| char buffer[sizeof(*x)]; |
| // Registers 0 and 1 -> x. |
| memcpy(buffer, registers_, sizeof(*x)); |
| memcpy(x, buffer, sizeof(*x)); |
| // Registers 2 and 3 -> y. |
| memcpy(buffer, registers_ + 2, sizeof(*y)); |
| memcpy(y, buffer, sizeof(*y)); |
| } |
| } |
| |
| // For use in calls that take one double value, constructed either |
| // from r0 and r1 or d0. |
| void Simulator::GetFpArgs(double* x) { |
| if (use_eabi_hardfloat()) { |
| *x = vfp_register[0]; |
| } else { |
| // We use a char buffer to get around the strict-aliasing rules which |
| // otherwise allow the compiler to optimize away the copy. |
| char buffer[sizeof(*x)]; |
| // Registers 0 and 1 -> x. |
| memcpy(buffer, registers_, sizeof(*x)); |
| memcpy(x, buffer, sizeof(*x)); |
| } |
| } |
| |
| |
| // For use in calls that take one double value constructed either |
| // from r0 and r1 or d0 and one integer value. |
| void Simulator::GetFpArgs(double* x, int32_t* y) { |
| if (use_eabi_hardfloat()) { |
| *x = vfp_register[0]; |
| *y = registers_[1]; |
| } else { |
| // We use a char buffer to get around the strict-aliasing rules which |
| // otherwise allow the compiler to optimize away the copy. |
| char buffer[sizeof(*x)]; |
| // Registers 0 and 1 -> x. |
| memcpy(buffer, registers_, sizeof(*x)); |
| memcpy(x, buffer, sizeof(*x)); |
| // Register 2 -> y. |
| memcpy(buffer, registers_ + 2, sizeof(*y)); |
| memcpy(y, buffer, sizeof(*y)); |
| } |
| } |
| |
| |
| // The return value is either in r0/r1 or d0. |
| void Simulator::SetFpResult(const double& result) { |
| if (use_eabi_hardfloat()) { |
| char buffer[2 * sizeof(vfp_register[0])]; |
| memcpy(buffer, &result, sizeof(buffer)); |
| // Copy result to d0. |
| memcpy(vfp_register, buffer, sizeof(buffer)); |
| } else { |
| char buffer[2 * sizeof(registers_[0])]; |
| memcpy(buffer, &result, sizeof(buffer)); |
| // Copy result to r0 and r1. |
| memcpy(registers_, buffer, sizeof(buffer)); |
| } |
| } |
| |
| |
| void Simulator::TrashCallerSaveRegisters() { |
| // We don't trash the registers with the return value. |
| registers_[2] = 0x50Bad4U; |
| registers_[3] = 0x50Bad4U; |
| registers_[12] = 0x50Bad4U; |
| } |
| |
| // Some Operating Systems allow unaligned access on ARMv7 targets. We |
| // assume that unaligned accesses are not allowed unless the v8 build system |
| // defines the CAN_USE_UNALIGNED_ACCESSES macro to be non-zero. |
| // The following statements below describes the behavior of the ARM CPUs |
| // that don't support unaligned access. |
| // Some ARM platforms raise an interrupt on detecting unaligned access. |
| // On others it does a funky rotation thing. For now we |
| // simply disallow unaligned reads. Note that simulator runs have the runtime |
| // system running directly on the host system and only generated code is |
| // executed in the simulator. Since the host is typically IA32 we will not |
| // get the correct ARM-like behaviour on unaligned accesses for those ARM |
| // targets that don't support unaligned loads and stores. |
| |
| |
| int Simulator::ReadW(int32_t addr, Instruction* instr) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| intptr_t* ptr = reinterpret_cast<intptr_t*>(addr); |
| return *ptr; |
| #else |
| if ((addr & 3) == 0) { |
| intptr_t* ptr = reinterpret_cast<intptr_t*>(addr); |
| return *ptr; |
| } |
| PrintF("Unaligned read at 0x%08x, pc=0x%08" V8PRIxPTR "\n", |
| addr, |
| reinterpret_cast<intptr_t>(instr)); |
| UNIMPLEMENTED(); |
| return 0; |
| #endif |
| } |
| |
| |
| void Simulator::WriteW(int32_t addr, int value, Instruction* instr) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| intptr_t* ptr = reinterpret_cast<intptr_t*>(addr); |
| *ptr = value; |
| return; |
| #else |
| if ((addr & 3) == 0) { |
| intptr_t* ptr = reinterpret_cast<intptr_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| PrintF("Unaligned write at 0x%08x, pc=0x%08" V8PRIxPTR "\n", |
| addr, |
| reinterpret_cast<intptr_t>(instr)); |
| UNIMPLEMENTED(); |
| #endif |
| } |
| |
| |
| uint16_t Simulator::ReadHU(int32_t addr, Instruction* instr) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| uint16_t* ptr = reinterpret_cast<uint16_t*>(addr); |
| return *ptr; |
| #else |
| if ((addr & 1) == 0) { |
| uint16_t* ptr = reinterpret_cast<uint16_t*>(addr); |
| return *ptr; |
| } |
| PrintF("Unaligned unsigned halfword read at 0x%08x, pc=0x%08" V8PRIxPTR "\n", |
| addr, |
| reinterpret_cast<intptr_t>(instr)); |
| UNIMPLEMENTED(); |
| return 0; |
| #endif |
| } |
| |
| |
| int16_t Simulator::ReadH(int32_t addr, Instruction* instr) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| int16_t* ptr = reinterpret_cast<int16_t*>(addr); |
| return *ptr; |
| #else |
| if ((addr & 1) == 0) { |
| int16_t* ptr = reinterpret_cast<int16_t*>(addr); |
| return *ptr; |
| } |
| PrintF("Unaligned signed halfword read at 0x%08x\n", addr); |
| UNIMPLEMENTED(); |
| return 0; |
| #endif |
| } |
| |
| |
| void Simulator::WriteH(int32_t addr, uint16_t value, Instruction* instr) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| uint16_t* ptr = reinterpret_cast<uint16_t*>(addr); |
| *ptr = value; |
| return; |
| #else |
| if ((addr & 1) == 0) { |
| uint16_t* ptr = reinterpret_cast<uint16_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| PrintF("Unaligned unsigned halfword write at 0x%08x, pc=0x%08" V8PRIxPTR "\n", |
| addr, |
| reinterpret_cast<intptr_t>(instr)); |
| UNIMPLEMENTED(); |
| #endif |
| } |
| |
| |
| void Simulator::WriteH(int32_t addr, int16_t value, Instruction* instr) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| int16_t* ptr = reinterpret_cast<int16_t*>(addr); |
| *ptr = value; |
| return; |
| #else |
| if ((addr & 1) == 0) { |
| int16_t* ptr = reinterpret_cast<int16_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| PrintF("Unaligned halfword write at 0x%08x, pc=0x%08" V8PRIxPTR "\n", |
| addr, |
| reinterpret_cast<intptr_t>(instr)); |
| UNIMPLEMENTED(); |
| #endif |
| } |
| |
| |
| uint8_t Simulator::ReadBU(int32_t addr) { |
| uint8_t* ptr = reinterpret_cast<uint8_t*>(addr); |
| return *ptr; |
| } |
| |
| |
| int8_t Simulator::ReadB(int32_t addr) { |
| int8_t* ptr = reinterpret_cast<int8_t*>(addr); |
| return *ptr; |
| } |
| |
| |
| void Simulator::WriteB(int32_t addr, uint8_t value) { |
| uint8_t* ptr = reinterpret_cast<uint8_t*>(addr); |
| *ptr = value; |
| } |
| |
| |
| void Simulator::WriteB(int32_t addr, int8_t value) { |
| int8_t* ptr = reinterpret_cast<int8_t*>(addr); |
| *ptr = value; |
| } |
| |
| |
| int32_t* Simulator::ReadDW(int32_t addr) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| int32_t* ptr = reinterpret_cast<int32_t*>(addr); |
| return ptr; |
| #else |
| if ((addr & 3) == 0) { |
| int32_t* ptr = reinterpret_cast<int32_t*>(addr); |
| return ptr; |
| } |
| PrintF("Unaligned read at 0x%08x\n", addr); |
| UNIMPLEMENTED(); |
| return 0; |
| #endif |
| } |
| |
| |
| void Simulator::WriteDW(int32_t addr, int32_t value1, int32_t value2) { |
| #if V8_TARGET_CAN_READ_UNALIGNED |
| int32_t* ptr = reinterpret_cast<int32_t*>(addr); |
| *ptr++ = value1; |
| *ptr = value2; |
| return; |
| #else |
| if ((addr & 3) == 0) { |
| int32_t* ptr = reinterpret_cast<int32_t*>(addr); |
| *ptr++ = value1; |
| *ptr = value2; |
| return; |
| } |
| PrintF("Unaligned write at 0x%08x\n", addr); |
| UNIMPLEMENTED(); |
| #endif |
| } |
| |
| |
| // Returns the limit of the stack area to enable checking for stack overflows. |
| uintptr_t Simulator::StackLimit() const { |
| // Leave a safety margin of 1024 bytes to prevent overrunning the stack when |
| // pushing values. |
| return reinterpret_cast<uintptr_t>(stack_) + 1024; |
| } |
| |
| |
| // Unsupported instructions use Format to print an error and stop execution. |
| void Simulator::Format(Instruction* instr, const char* format) { |
| PrintF("Simulator found unsupported instruction:\n 0x%08x: %s\n", |
| reinterpret_cast<intptr_t>(instr), format); |
| UNIMPLEMENTED(); |
| } |
| |
| |
| // Checks if the current instruction should be executed based on its |
| // condition bits. |
| bool Simulator::ConditionallyExecute(Instruction* instr) { |
| switch (instr->ConditionField()) { |
| case eq: return z_flag_; |
| case ne: return !z_flag_; |
| case cs: return c_flag_; |
| case cc: return !c_flag_; |
| case mi: return n_flag_; |
| case pl: return !n_flag_; |
| case vs: return v_flag_; |
| case vc: return !v_flag_; |
| case hi: return c_flag_ && !z_flag_; |
| case ls: return !c_flag_ || z_flag_; |
| case ge: return n_flag_ == v_flag_; |
| case lt: return n_flag_ != v_flag_; |
| case gt: return !z_flag_ && (n_flag_ == v_flag_); |
| case le: return z_flag_ || (n_flag_ != v_flag_); |
| case al: return true; |
| default: UNREACHABLE(); |
| } |
| return false; |
| } |
| |
| |
| // Calculate and set the Negative and Zero flags. |
| void Simulator::SetNZFlags(int32_t val) { |
| n_flag_ = (val < 0); |
| z_flag_ = (val == 0); |
| } |
| |
| |
| // Set the Carry flag. |
| void Simulator::SetCFlag(bool val) { |
| c_flag_ = val; |
| } |
| |
| |
| // Set the oVerflow flag. |
| void Simulator::SetVFlag(bool val) { |
| v_flag_ = val; |
| } |
| |
| |
| // Calculate C flag value for additions. |
| bool Simulator::CarryFrom(int32_t left, int32_t right, int32_t carry) { |
| uint32_t uleft = static_cast<uint32_t>(left); |
| uint32_t uright = static_cast<uint32_t>(right); |
| uint32_t urest = 0xffffffffU - uleft; |
| |
| return (uright > urest) || |
| (carry && (((uright + 1) > urest) || (uright > (urest - 1)))); |
| } |
| |
| |
| // Calculate C flag value for subtractions. |
| bool Simulator::BorrowFrom(int32_t left, int32_t right) { |
| uint32_t uleft = static_cast<uint32_t>(left); |
| uint32_t uright = static_cast<uint32_t>(right); |
| |
| return (uright > uleft); |
| } |
| |
| |
| // Calculate V flag value for additions and subtractions. |
| bool Simulator::OverflowFrom(int32_t alu_out, |
| int32_t left, int32_t right, bool addition) { |
| bool overflow; |
| if (addition) { |
| // operands have the same sign |
| overflow = ((left >= 0 && right >= 0) || (left < 0 && right < 0)) |
| // and operands and result have different sign |
| && ((left < 0 && alu_out >= 0) || (left >= 0 && alu_out < 0)); |
| } else { |
| // operands have different signs |
| overflow = ((left < 0 && right >= 0) || (left >= 0 && right < 0)) |
| // and first operand and result have different signs |
| && ((left < 0 && alu_out >= 0) || (left >= 0 && alu_out < 0)); |
| } |
| return overflow; |
| } |
| |
| |
| // Support for VFP comparisons. |
| void Simulator::Compute_FPSCR_Flags(double val1, double val2) { |
| if (isnan(val1) || isnan(val2)) { |
| n_flag_FPSCR_ = false; |
| z_flag_FPSCR_ = false; |
| c_flag_FPSCR_ = true; |
| v_flag_FPSCR_ = true; |
| // All non-NaN cases. |
| } else if (val1 == val2) { |
| n_flag_FPSCR_ = false; |
| z_flag_FPSCR_ = true; |
| c_flag_FPSCR_ = true; |
| v_flag_FPSCR_ = false; |
| } else if (val1 < val2) { |
| n_flag_FPSCR_ = true; |
| z_flag_FPSCR_ = false; |
| c_flag_FPSCR_ = false; |
| v_flag_FPSCR_ = false; |
| } else { |
| // Case when (val1 > val2). |
| n_flag_FPSCR_ = false; |
| z_flag_FPSCR_ = false; |
| c_flag_FPSCR_ = true; |
| v_flag_FPSCR_ = false; |
| } |
| } |
| |
| |
| void Simulator::Copy_FPSCR_to_APSR() { |
| n_flag_ = n_flag_FPSCR_; |
| z_flag_ = z_flag_FPSCR_; |
| c_flag_ = c_flag_FPSCR_; |
| v_flag_ = v_flag_FPSCR_; |
| } |
| |
| |
| // Addressing Mode 1 - Data-processing operands: |
| // Get the value based on the shifter_operand with register. |
| int32_t Simulator::GetShiftRm(Instruction* instr, bool* carry_out) { |
| ShiftOp shift = instr->ShiftField(); |
| int shift_amount = instr->ShiftAmountValue(); |
| int32_t result = get_register(instr->RmValue()); |
| if (instr->Bit(4) == 0) { |
| // by immediate |
| if ((shift == ROR) && (shift_amount == 0)) { |
| UNIMPLEMENTED(); |
| return result; |
| } else if (((shift == LSR) || (shift == ASR)) && (shift_amount == 0)) { |
| shift_amount = 32; |
| } |
| switch (shift) { |
| case ASR: { |
| if (shift_amount == 0) { |
| if (result < 0) { |
| result = 0xffffffff; |
| *carry_out = true; |
| } else { |
| result = 0; |
| *carry_out = false; |
| } |
| } else { |
| result >>= (shift_amount - 1); |
| *carry_out = (result & 1) == 1; |
| result >>= 1; |
| } |
| break; |
| } |
| |
| case LSL: { |
| if (shift_amount == 0) { |
| *carry_out = c_flag_; |
| } else { |
| result <<= (shift_amount - 1); |
| *carry_out = (result < 0); |
| result <<= 1; |
| } |
| break; |
| } |
| |
| case LSR: { |
| if (shift_amount == 0) { |
| result = 0; |
| *carry_out = c_flag_; |
| } else { |
| uint32_t uresult = static_cast<uint32_t>(result); |
| uresult >>= (shift_amount - 1); |
| *carry_out = (uresult & 1) == 1; |
| uresult >>= 1; |
| result = static_cast<int32_t>(uresult); |
| } |
| break; |
| } |
| |
| case ROR: { |
| UNIMPLEMENTED(); |
| break; |
| } |
| |
| default: { |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } else { |
| // by register |
| int rs = instr->RsValue(); |
| shift_amount = get_register(rs) &0xff; |
| switch (shift) { |
| case ASR: { |
| if (shift_amount == 0) { |
| *carry_out = c_flag_; |
| } else if (shift_amount < 32) { |
| result >>= (shift_amount - 1); |
| *carry_out = (result & 1) == 1; |
| result >>= 1; |
| } else { |
| ASSERT(shift_amount >= 32); |
| if (result < 0) { |
| *carry_out = true; |
| result = 0xffffffff; |
| } else { |
| *carry_out = false; |
| result = 0; |
| } |
| } |
| break; |
| } |
| |
| case LSL: { |
| if (shift_amount == 0) { |
| *carry_out = c_flag_; |
| } else if (shift_amount < 32) { |
| result <<= (shift_amount - 1); |
| *carry_out = (result < 0); |
| result <<= 1; |
| } else if (shift_amount == 32) { |
| *carry_out = (result & 1) == 1; |
| result = 0; |
| } else { |
| ASSERT(shift_amount > 32); |
| *carry_out = false; |
| result = 0; |
| } |
| break; |
| } |
| |
| case LSR: { |
| if (shift_amount == 0) { |
| *carry_out = c_flag_; |
| } else if (shift_amount < 32) { |
| uint32_t uresult = static_cast<uint32_t>(result); |
| uresult >>= (shift_amount - 1); |
| *carry_out = (uresult & 1) == 1; |
| uresult >>= 1; |
| result = static_cast<int32_t>(uresult); |
| } else if (shift_amount == 32) { |
| *carry_out = (result < 0); |
| result = 0; |
| } else { |
| *carry_out = false; |
| result = 0; |
| } |
| break; |
| } |
| |
| case ROR: { |
| UNIMPLEMENTED(); |
| break; |
| } |
| |
| default: { |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } |
| return result; |
| } |
| |
| |
| // Addressing Mode 1 - Data-processing operands: |
| // Get the value based on the shifter_operand with immediate. |
| int32_t Simulator::GetImm(Instruction* instr, bool* carry_out) { |
| int rotate = instr->RotateValue() * 2; |
| int immed8 = instr->Immed8Value(); |
| int imm = (immed8 >> rotate) | (immed8 << (32 - rotate)); |
| *carry_out = (rotate == 0) ? c_flag_ : (imm < 0); |
| return imm; |
| } |
| |
| |
| static int count_bits(int bit_vector) { |
| int count = 0; |
| while (bit_vector != 0) { |
| if ((bit_vector & 1) != 0) { |
| count++; |
| } |
| bit_vector >>= 1; |
| } |
| return count; |
| } |
| |
| |
| void Simulator::ProcessPUW(Instruction* instr, |
| int num_regs, |
| int reg_size, |
| intptr_t* start_address, |
| intptr_t* end_address) { |
| int rn = instr->RnValue(); |
| int32_t rn_val = get_register(rn); |
| switch (instr->PUField()) { |
| case da_x: { |
| UNIMPLEMENTED(); |
| break; |
| } |
| case ia_x: { |
| *start_address = rn_val; |
| *end_address = rn_val + (num_regs * reg_size) - reg_size; |
| rn_val = rn_val + (num_regs * reg_size); |
| break; |
| } |
| case db_x: { |
| *start_address = rn_val - (num_regs * reg_size); |
| *end_address = rn_val - reg_size; |
| rn_val = *start_address; |
| break; |
| } |
| case ib_x: { |
| *start_address = rn_val + reg_size; |
| *end_address = rn_val + (num_regs * reg_size); |
| rn_val = *end_address; |
| break; |
| } |
| default: { |
| UNREACHABLE(); |
| break; |
| } |
| } |
| if (instr->HasW()) { |
| set_register(rn, rn_val); |
| } |
| } |
| |
| // Addressing Mode 4 - Load and Store Multiple |
| void Simulator::HandleRList(Instruction* instr, bool load) { |
| int rlist = instr->RlistValue(); |
| int num_regs = count_bits(rlist); |
| |
| intptr_t start_address = 0; |
| intptr_t end_address = 0; |
| ProcessPUW(instr, num_regs, kPointerSize, &start_address, &end_address); |
| |
| intptr_t* address = reinterpret_cast<intptr_t*>(start_address); |
| // Catch null pointers a little earlier. |
| ASSERT(start_address > 8191 || start_address < 0); |
| int reg = 0; |
| while (rlist != 0) { |
| if ((rlist & 1) != 0) { |
| if (load) { |
| set_register(reg, *address); |
| } else { |
| *address = get_register(reg); |
| } |
| address += 1; |
| } |
| reg++; |
| rlist >>= 1; |
| } |
| ASSERT(end_address == ((intptr_t)address) - 4); |
| } |
| |
| |
| // Addressing Mode 6 - Load and Store Multiple Coprocessor registers. |
| void Simulator::HandleVList(Instruction* instr) { |
| VFPRegPrecision precision = |
| (instr->SzValue() == 0) ? kSinglePrecision : kDoublePrecision; |
| int operand_size = (precision == kSinglePrecision) ? 4 : 8; |
| |
| bool load = (instr->VLValue() == 0x1); |
| |
| int vd; |
| int num_regs; |
| vd = instr->VFPDRegValue(precision); |
| if (precision == kSinglePrecision) { |
| num_regs = instr->Immed8Value(); |
| } else { |
| num_regs = instr->Immed8Value() / 2; |
| } |
| |
| intptr_t start_address = 0; |
| intptr_t end_address = 0; |
| ProcessPUW(instr, num_regs, operand_size, &start_address, &end_address); |
| |
| intptr_t* address = reinterpret_cast<intptr_t*>(start_address); |
| for (int reg = vd; reg < vd + num_regs; reg++) { |
| if (precision == kSinglePrecision) { |
| if (load) { |
| set_s_register_from_sinteger( |
| reg, ReadW(reinterpret_cast<int32_t>(address), instr)); |
| } else { |
| WriteW(reinterpret_cast<int32_t>(address), |
| get_sinteger_from_s_register(reg), instr); |
| } |
| address += 1; |
| } else { |
| if (load) { |
| set_s_register_from_sinteger( |
| 2 * reg, ReadW(reinterpret_cast<int32_t>(address), instr)); |
| set_s_register_from_sinteger( |
| 2 * reg + 1, ReadW(reinterpret_cast<int32_t>(address + 1), instr)); |
| } else { |
| WriteW(reinterpret_cast<int32_t>(address), |
| get_sinteger_from_s_register(2 * reg), instr); |
| WriteW(reinterpret_cast<int32_t>(address + 1), |
| get_sinteger_from_s_register(2 * reg + 1), instr); |
| } |
| address += 2; |
| } |
| } |
| ASSERT(reinterpret_cast<intptr_t>(address) - operand_size == end_address); |
| } |
| |
| |
| // Calls into the V8 runtime are based on this very simple interface. |
| // Note: To be able to return two values from some calls the code in runtime.cc |
| // uses the ObjectPair which is essentially two 32-bit values stuffed into a |
| // 64-bit value. With the code below we assume that all runtime calls return |
| // 64 bits of result. If they don't, the r1 result register contains a bogus |
| // value, which is fine because it is caller-saved. |
| typedef int64_t (*SimulatorRuntimeCall)(int32_t arg0, |
| int32_t arg1, |
| int32_t arg2, |
| int32_t arg3, |
| int32_t arg4, |
| int32_t arg5); |
| typedef double (*SimulatorRuntimeFPCall)(int32_t arg0, |
| int32_t arg1, |
| int32_t arg2, |
| int32_t arg3); |
| |
| // This signature supports direct call in to API function native callback |
| // (refer to InvocationCallback in v8.h). |
| typedef v8::Handle<v8::Value> (*SimulatorRuntimeDirectApiCall)(int32_t arg0); |
| |
| // This signature supports direct call to accessor getter callback. |
| typedef v8::Handle<v8::Value> (*SimulatorRuntimeDirectGetterCall)(int32_t arg0, |
| int32_t arg1); |
| |
| // Software interrupt instructions are used by the simulator to call into the |
| // C-based V8 runtime. |
| void Simulator::SoftwareInterrupt(Instruction* instr) { |
| int svc = instr->SvcValue(); |
| switch (svc) { |
| case kCallRtRedirected: { |
| // Check if stack is aligned. Error if not aligned is reported below to |
| // include information on the function called. |
| bool stack_aligned = |
| (get_register(sp) |
| & (::v8::internal::FLAG_sim_stack_alignment - 1)) == 0; |
| Redirection* redirection = Redirection::FromSwiInstruction(instr); |
| int32_t arg0 = get_register(r0); |
| int32_t arg1 = get_register(r1); |
| int32_t arg2 = get_register(r2); |
| int32_t arg3 = get_register(r3); |
| int32_t* stack_pointer = reinterpret_cast<int32_t*>(get_register(sp)); |
| int32_t arg4 = stack_pointer[0]; |
| int32_t arg5 = stack_pointer[1]; |
| bool fp_call = |
| (redirection->type() == ExternalReference::BUILTIN_FP_FP_CALL) || |
| (redirection->type() == ExternalReference::BUILTIN_COMPARE_CALL) || |
| (redirection->type() == ExternalReference::BUILTIN_FP_CALL) || |
| (redirection->type() == ExternalReference::BUILTIN_FP_INT_CALL); |
| if (use_eabi_hardfloat()) { |
| // With the hard floating point calling convention, double |
| // arguments are passed in VFP registers. Fetch the arguments |
| // from there and call the builtin using soft floating point |
| // convention. |
| switch (redirection->type()) { |
| case ExternalReference::BUILTIN_FP_FP_CALL: |
| case ExternalReference::BUILTIN_COMPARE_CALL: |
| arg0 = vfp_register[0]; |
| arg1 = vfp_register[1]; |
| arg2 = vfp_register[2]; |
| arg3 = vfp_register[3]; |
| break; |
| case ExternalReference::BUILTIN_FP_CALL: |
| arg0 = vfp_register[0]; |
| arg1 = vfp_register[1]; |
| break; |
| case ExternalReference::BUILTIN_FP_INT_CALL: |
| arg0 = vfp_register[0]; |
| arg1 = vfp_register[1]; |
| arg2 = get_register(0); |
| break; |
| default: |
| break; |
| } |
| } |
| // This is dodgy but it works because the C entry stubs are never moved. |
| // See comment in codegen-arm.cc and bug 1242173. |
| int32_t saved_lr = get_register(lr); |
| intptr_t external = |
| reinterpret_cast<intptr_t>(redirection->external_function()); |
| if (fp_call) { |
| if (::v8::internal::FLAG_trace_sim || !stack_aligned) { |
| SimulatorRuntimeFPCall target = |
| reinterpret_cast<SimulatorRuntimeFPCall>(external); |
| double dval0, dval1; |
| int32_t ival; |
| switch (redirection->type()) { |
| case ExternalReference::BUILTIN_FP_FP_CALL: |
| case ExternalReference::BUILTIN_COMPARE_CALL: |
| GetFpArgs(&dval0, &dval1); |
| PrintF("Call to host function at %p with args %f, %f", |
| FUNCTION_ADDR(target), dval0, dval1); |
| break; |
| case ExternalReference::BUILTIN_FP_CALL: |
| GetFpArgs(&dval0); |
| PrintF("Call to host function at %p with arg %f", |
| FUNCTION_ADDR(target), dval0); |
| break; |
| case ExternalReference::BUILTIN_FP_INT_CALL: |
| GetFpArgs(&dval0, &ival); |
| PrintF("Call to host function at %p with args %f, %d", |
| FUNCTION_ADDR(target), dval0, ival); |
| break; |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| if (!stack_aligned) { |
| PrintF(" with unaligned stack %08x\n", get_register(sp)); |
| } |
| PrintF("\n"); |
| } |
| CHECK(stack_aligned); |
| if (redirection->type() != ExternalReference::BUILTIN_COMPARE_CALL) { |
| SimulatorRuntimeFPCall target = |
| reinterpret_cast<SimulatorRuntimeFPCall>(external); |
| double result = target(arg0, arg1, arg2, arg3); |
| SetFpResult(result); |
| } else { |
| SimulatorRuntimeCall target = |
| reinterpret_cast<SimulatorRuntimeCall>(external); |
| int64_t result = target(arg0, arg1, arg2, arg3, arg4, arg5); |
| int32_t lo_res = static_cast<int32_t>(result); |
| int32_t hi_res = static_cast<int32_t>(result >> 32); |
| if (::v8::internal::FLAG_trace_sim) { |
| PrintF("Returned %08x\n", lo_res); |
| } |
| set_register(r0, lo_res); |
| set_register(r1, hi_res); |
| } |
| } else if (redirection->type() == ExternalReference::DIRECT_API_CALL) { |
| SimulatorRuntimeDirectApiCall target = |
| reinterpret_cast<SimulatorRuntimeDirectApiCall>(external); |
| if (::v8::internal::FLAG_trace_sim || !stack_aligned) { |
| PrintF("Call to host function at %p args %08x", |
| FUNCTION_ADDR(target), arg0); |
| if (!stack_aligned) { |
| PrintF(" with unaligned stack %08x\n", get_register(sp)); |
| } |
| PrintF("\n"); |
| } |
| CHECK(stack_aligned); |
| v8::Handle<v8::Value> result = target(arg0); |
| if (::v8::internal::FLAG_trace_sim) { |
| PrintF("Returned %p\n", reinterpret_cast<void *>(*result)); |
| } |
| set_register(r0, (int32_t) *result); |
| } else if (redirection->type() == ExternalReference::DIRECT_GETTER_CALL) { |
| SimulatorRuntimeDirectGetterCall target = |
| reinterpret_cast<SimulatorRuntimeDirectGetterCall>(external); |
| if (::v8::internal::FLAG_trace_sim || !stack_aligned) { |
| PrintF("Call to host function at %p args %08x %08x", |
| FUNCTION_ADDR(target), arg0, arg1); |
| if (!stack_aligned) { |
| PrintF(" with unaligned stack %08x\n", get_register(sp)); |
| } |
| PrintF("\n"); |
| } |
| CHECK(stack_aligned); |
| v8::Handle<v8::Value> result = target(arg0, arg1); |
| if (::v8::internal::FLAG_trace_sim) { |
| PrintF("Returned %p\n", reinterpret_cast<void *>(*result)); |
| } |
| set_register(r0, (int32_t) *result); |
| } else { |
| // builtin call. |
| ASSERT(redirection->type() == ExternalReference::BUILTIN_CALL); |
| SimulatorRuntimeCall target = |
| reinterpret_cast<SimulatorRuntimeCall>(external); |
| if (::v8::internal::FLAG_trace_sim || !stack_aligned) { |
| PrintF( |
| "Call to host function at %p" |
| "args %08x, %08x, %08x, %08x, %08x, %08x", |
| FUNCTION_ADDR(target), |
| arg0, |
| arg1, |
| arg2, |
| arg3, |
| arg4, |
| arg5); |
| if (!stack_aligned) { |
| PrintF(" with unaligned stack %08x\n", get_register(sp)); |
| } |
| PrintF("\n"); |
| } |
| CHECK(stack_aligned); |
| int64_t result = target(arg0, arg1, arg2, arg3, arg4, arg5); |
| int32_t lo_res = static_cast<int32_t>(result); |
| int32_t hi_res = static_cast<int32_t>(result >> 32); |
| if (::v8::internal::FLAG_trace_sim) { |
| PrintF("Returned %08x\n", lo_res); |
| } |
| set_register(r0, lo_res); |
| set_register(r1, hi_res); |
| } |
| set_register(lr, saved_lr); |
| set_pc(get_register(lr)); |
| break; |
| } |
| case kBreakpoint: { |
| ArmDebugger dbg(this); |
| dbg.Debug(); |
| break; |
| } |
| // stop uses all codes greater than 1 << 23. |
| default: { |
| if (svc >= (1 << 23)) { |
| uint32_t code = svc & kStopCodeMask; |
| if (isWatchedStop(code)) { |
| IncreaseStopCounter(code); |
| } |
| // Stop if it is enabled, otherwise go on jumping over the stop |
| // and the message address. |
| if (isEnabledStop(code)) { |
| ArmDebugger dbg(this); |
| dbg.Stop(instr); |
| } else { |
| set_pc(get_pc() + 2 * Instruction::kInstrSize); |
| } |
| } else { |
| // This is not a valid svc code. |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } |
| } |
| |
| |
| // Stop helper functions. |
| bool Simulator::isStopInstruction(Instruction* instr) { |
| return (instr->Bits(27, 24) == 0xF) && (instr->SvcValue() >= kStopCode); |
| } |
| |
| |
| bool Simulator::isWatchedStop(uint32_t code) { |
| ASSERT(code <= kMaxStopCode); |
| return code < kNumOfWatchedStops; |
| } |
| |
| |
| bool Simulator::isEnabledStop(uint32_t code) { |
| ASSERT(code <= kMaxStopCode); |
| // Unwatched stops are always enabled. |
| return !isWatchedStop(code) || |
| !(watched_stops[code].count & kStopDisabledBit); |
| } |
| |
| |
| void Simulator::EnableStop(uint32_t code) { |
| ASSERT(isWatchedStop(code)); |
| if (!isEnabledStop(code)) { |
| watched_stops[code].count &= ~kStopDisabledBit; |
| } |
| } |
| |
| |
| void Simulator::DisableStop(uint32_t code) { |
| ASSERT(isWatchedStop(code)); |
| if (isEnabledStop(code)) { |
| watched_stops[code].count |= kStopDisabledBit; |
| } |
| } |
| |
| |
| void Simulator::IncreaseStopCounter(uint32_t code) { |
| ASSERT(code <= kMaxStopCode); |
| ASSERT(isWatchedStop(code)); |
| if ((watched_stops[code].count & ~(1 << 31)) == 0x7fffffff) { |
| PrintF("Stop counter for code %i has overflowed.\n" |
| "Enabling this code and reseting the counter to 0.\n", code); |
| watched_stops[code].count = 0; |
| EnableStop(code); |
| } else { |
| watched_stops[code].count++; |
| } |
| } |
| |
| |
| // Print a stop status. |
| void Simulator::PrintStopInfo(uint32_t code) { |
| ASSERT(code <= kMaxStopCode); |
| if (!isWatchedStop(code)) { |
| PrintF("Stop not watched."); |
| } else { |
| const char* state = isEnabledStop(code) ? "Enabled" : "Disabled"; |
| int32_t count = watched_stops[code].count & ~kStopDisabledBit; |
| // Don't print the state of unused breakpoints. |
| if (count != 0) { |
| if (watched_stops[code].desc) { |
| PrintF("stop %i - 0x%x: \t%s, \tcounter = %i, \t%s\n", |
| code, code, state, count, watched_stops[code].desc); |
| } else { |
| PrintF("stop %i - 0x%x: \t%s, \tcounter = %i\n", |
| code, code, state, count); |
| } |
| } |
| } |
| } |
| |
| |
| // Handle execution based on instruction types. |
| |
| // Instruction types 0 and 1 are both rolled into one function because they |
| // only differ in the handling of the shifter_operand. |
| void Simulator::DecodeType01(Instruction* instr) { |
| int type = instr->TypeValue(); |
| if ((type == 0) && instr->IsSpecialType0()) { |
| // multiply instruction or extra loads and stores |
| if (instr->Bits(7, 4) == 9) { |
| if (instr->Bit(24) == 0) { |
| // Raw field decoding here. Multiply instructions have their Rd in |
| // funny places. |
| int rn = instr->RnValue(); |
| int rm = instr->RmValue(); |
| int rs = instr->RsValue(); |
| int32_t rs_val = get_register(rs); |
| int32_t rm_val = get_register(rm); |
| if (instr->Bit(23) == 0) { |
| if (instr->Bit(21) == 0) { |
| // The MUL instruction description (A 4.1.33) refers to Rd as being |
| // the destination for the operation, but it confusingly uses the |
| // Rn field to encode it. |
| // Format(instr, "mul'cond's 'rn, 'rm, 'rs"); |
| int rd = rn; // Remap the rn field to the Rd register. |
| int32_t alu_out = rm_val * rs_val; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| } |
| } else { |
| // The MLA instruction description (A 4.1.28) refers to the order |
| // of registers as "Rd, Rm, Rs, Rn". But confusingly it uses the |
| // Rn field to encode the Rd register and the Rd field to encode |
| // the Rn register. |
| Format(instr, "mla'cond's 'rn, 'rm, 'rs, 'rd"); |
| } |
| } else { |
| // The signed/long multiply instructions use the terms RdHi and RdLo |
| // when referring to the target registers. They are mapped to the Rn |
| // and Rd fields as follows: |
| // RdLo == Rd |
| // RdHi == Rn (This is confusingly stored in variable rd here |
| // because the mul instruction from above uses the |
| // Rn field to encode the Rd register. Good luck figuring |
| // this out without reading the ARM instruction manual |
| // at a very detailed level.) |
| // Format(instr, "'um'al'cond's 'rd, 'rn, 'rs, 'rm"); |
| int rd_hi = rn; // Remap the rn field to the RdHi register. |
| int rd_lo = instr->RdValue(); |
| int32_t hi_res = 0; |
| int32_t lo_res = 0; |
| if (instr->Bit(22) == 1) { |
| int64_t left_op = static_cast<int32_t>(rm_val); |
| int64_t right_op = static_cast<int32_t>(rs_val); |
| uint64_t result = left_op * right_op; |
| hi_res = static_cast<int32_t>(result >> 32); |
| lo_res = static_cast<int32_t>(result & 0xffffffff); |
| } else { |
| // unsigned multiply |
| uint64_t left_op = static_cast<uint32_t>(rm_val); |
| uint64_t right_op = static_cast<uint32_t>(rs_val); |
| uint64_t result = left_op * right_op; |
| hi_res = static_cast<int32_t>(result >> 32); |
| lo_res = static_cast<int32_t>(result & 0xffffffff); |
| } |
| set_register(rd_lo, lo_res); |
| set_register(rd_hi, hi_res); |
| if (instr->HasS()) { |
| UNIMPLEMENTED(); |
| } |
| } |
| } else { |
| UNIMPLEMENTED(); // Not used by V8. |
| } |
| } else { |
| // extra load/store instructions |
| int rd = instr->RdValue(); |
| int rn = instr->RnValue(); |
| int32_t rn_val = get_register(rn); |
| int32_t addr = 0; |
| if (instr->Bit(22) == 0) { |
| int rm = instr->RmValue(); |
| int32_t rm_val = get_register(rm); |
| switch (instr->PUField()) { |
| case da_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn], -'rm"); |
| ASSERT(!instr->HasW()); |
| addr = rn_val; |
| rn_val -= rm_val; |
| set_register(rn, rn_val); |
| break; |
| } |
| case ia_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn], +'rm"); |
| ASSERT(!instr->HasW()); |
| addr = rn_val; |
| rn_val += rm_val; |
| set_register(rn, rn_val); |
| break; |
| } |
| case db_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn, -'rm]'w"); |
| rn_val -= rm_val; |
| addr = rn_val; |
| if (instr->HasW()) { |
| set_register(rn, rn_val); |
| } |
| break; |
| } |
| case ib_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn, +'rm]'w"); |
| rn_val += rm_val; |
| addr = rn_val; |
| if (instr->HasW()) { |
| set_register(rn, rn_val); |
| } |
| break; |
| } |
| default: { |
| // The PU field is a 2-bit field. |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } else { |
| int32_t imm_val = (instr->ImmedHValue() << 4) | instr->ImmedLValue(); |
| switch (instr->PUField()) { |
| case da_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn], #-'off8"); |
| ASSERT(!instr->HasW()); |
| addr = rn_val; |
| rn_val -= imm_val; |
| set_register(rn, rn_val); |
| break; |
| } |
| case ia_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn], #+'off8"); |
| ASSERT(!instr->HasW()); |
| addr = rn_val; |
| rn_val += imm_val; |
| set_register(rn, rn_val); |
| break; |
| } |
| case db_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn, #-'off8]'w"); |
| rn_val -= imm_val; |
| addr = rn_val; |
| if (instr->HasW()) { |
| set_register(rn, rn_val); |
| } |
| break; |
| } |
| case ib_x: { |
| // Format(instr, "'memop'cond'sign'h 'rd, ['rn, #+'off8]'w"); |
| rn_val += imm_val; |
| addr = rn_val; |
| if (instr->HasW()) { |
| set_register(rn, rn_val); |
| } |
| break; |
| } |
| default: { |
| // The PU field is a 2-bit field. |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } |
| if (((instr->Bits(7, 4) & 0xd) == 0xd) && (instr->Bit(20) == 0)) { |
| ASSERT((rd % 2) == 0); |
| if (instr->HasH()) { |
| // The strd instruction. |
| int32_t value1 = get_register(rd); |
| int32_t value2 = get_register(rd+1); |
| WriteDW(addr, value1, value2); |
| } else { |
| // The ldrd instruction. |
| int* rn_data = ReadDW(addr); |
| set_dw_register(rd, rn_data); |
| } |
| } else if (instr->HasH()) { |
| if (instr->HasSign()) { |
| if (instr->HasL()) { |
| int16_t val = ReadH(addr, instr); |
| set_register(rd, val); |
| } else { |
| int16_t val = get_register(rd); |
| WriteH(addr, val, instr); |
| } |
| } else { |
| if (instr->HasL()) { |
| uint16_t val = ReadHU(addr, instr); |
| set_register(rd, val); |
| } else { |
| uint16_t val = get_register(rd); |
| WriteH(addr, val, instr); |
| } |
| } |
| } else { |
| // signed byte loads |
| ASSERT(instr->HasSign()); |
| ASSERT(instr->HasL()); |
| int8_t val = ReadB(addr); |
| set_register(rd, val); |
| } |
| return; |
| } |
| } else if ((type == 0) && instr->IsMiscType0()) { |
| if (instr->Bits(22, 21) == 1) { |
| int rm = instr->RmValue(); |
| switch (instr->BitField(7, 4)) { |
| case BX: |
| set_pc(get_register(rm)); |
| break; |
| case BLX: { |
| uint32_t old_pc = get_pc(); |
| set_pc(get_register(rm)); |
| set_register(lr, old_pc + Instruction::kInstrSize); |
| break; |
| } |
| case BKPT: { |
| ArmDebugger dbg(this); |
| PrintF("Simulator hit BKPT.\n"); |
| dbg.Debug(); |
| break; |
| } |
| default: |
| UNIMPLEMENTED(); |
| } |
| } else if (instr->Bits(22, 21) == 3) { |
| int rm = instr->RmValue(); |
| int rd = instr->RdValue(); |
| switch (instr->BitField(7, 4)) { |
| case CLZ: { |
| uint32_t bits = get_register(rm); |
| int leading_zeros = 0; |
| if (bits == 0) { |
| leading_zeros = 32; |
| } else { |
| while ((bits & 0x80000000u) == 0) { |
| bits <<= 1; |
| leading_zeros++; |
| } |
| } |
| set_register(rd, leading_zeros); |
| break; |
| } |
| default: |
| UNIMPLEMENTED(); |
| } |
| } else { |
| PrintF("%08x\n", instr->InstructionBits()); |
| UNIMPLEMENTED(); |
| } |
| } else { |
| int rd = instr->RdValue(); |
| int rn = instr->RnValue(); |
| int32_t rn_val = get_register(rn); |
| int32_t shifter_operand = 0; |
| bool shifter_carry_out = 0; |
| if (type == 0) { |
| shifter_operand = GetShiftRm(instr, &shifter_carry_out); |
| } else { |
| ASSERT(instr->TypeValue() == 1); |
| shifter_operand = GetImm(instr, &shifter_carry_out); |
| } |
| int32_t alu_out; |
| |
| switch (instr->OpcodeField()) { |
| case AND: { |
| // Format(instr, "and'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "and'cond's 'rd, 'rn, 'imm"); |
| alu_out = rn_val & shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } |
| break; |
| } |
| |
| case EOR: { |
| // Format(instr, "eor'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "eor'cond's 'rd, 'rn, 'imm"); |
| alu_out = rn_val ^ shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } |
| break; |
| } |
| |
| case SUB: { |
| // Format(instr, "sub'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "sub'cond's 'rd, 'rn, 'imm"); |
| alu_out = rn_val - shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(!BorrowFrom(rn_val, shifter_operand)); |
| SetVFlag(OverflowFrom(alu_out, rn_val, shifter_operand, false)); |
| } |
| break; |
| } |
| |
| case RSB: { |
| // Format(instr, "rsb'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "rsb'cond's 'rd, 'rn, 'imm"); |
| alu_out = shifter_operand - rn_val; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(!BorrowFrom(shifter_operand, rn_val)); |
| SetVFlag(OverflowFrom(alu_out, shifter_operand, rn_val, false)); |
| } |
| break; |
| } |
| |
| case ADD: { |
| // Format(instr, "add'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "add'cond's 'rd, 'rn, 'imm"); |
| alu_out = rn_val + shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(CarryFrom(rn_val, shifter_operand)); |
| SetVFlag(OverflowFrom(alu_out, rn_val, shifter_operand, true)); |
| } |
| break; |
| } |
| |
| case ADC: { |
| // Format(instr, "adc'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "adc'cond's 'rd, 'rn, 'imm"); |
| alu_out = rn_val + shifter_operand + GetCarry(); |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(CarryFrom(rn_val, shifter_operand, GetCarry())); |
| SetVFlag(OverflowFrom(alu_out, rn_val, shifter_operand, true)); |
| } |
| break; |
| } |
| |
| case SBC: { |
| Format(instr, "sbc'cond's 'rd, 'rn, 'shift_rm"); |
| Format(instr, "sbc'cond's 'rd, 'rn, 'imm"); |
| break; |
| } |
| |
| case RSC: { |
| Format(instr, "rsc'cond's 'rd, 'rn, 'shift_rm"); |
| Format(instr, "rsc'cond's 'rd, 'rn, 'imm"); |
| break; |
| } |
| |
| case TST: { |
| if (instr->HasS()) { |
| // Format(instr, "tst'cond 'rn, 'shift_rm"); |
| // Format(instr, "tst'cond 'rn, 'imm"); |
| alu_out = rn_val & shifter_operand; |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } else { |
| // Format(instr, "movw'cond 'rd, 'imm"). |
| alu_out = instr->ImmedMovwMovtValue(); |
| set_register(rd, alu_out); |
| } |
| break; |
| } |
| |
| case TEQ: { |
| if (instr->HasS()) { |
| // Format(instr, "teq'cond 'rn, 'shift_rm"); |
| // Format(instr, "teq'cond 'rn, 'imm"); |
| alu_out = rn_val ^ shifter_operand; |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } else { |
| // Other instructions matching this pattern are handled in the |
| // miscellaneous instructions part above. |
| UNREACHABLE(); |
| } |
| break; |
| } |
| |
| case CMP: { |
| if (instr->HasS()) { |
| // Format(instr, "cmp'cond 'rn, 'shift_rm"); |
| // Format(instr, "cmp'cond 'rn, 'imm"); |
| alu_out = rn_val - shifter_operand; |
| SetNZFlags(alu_out); |
| SetCFlag(!BorrowFrom(rn_val, shifter_operand)); |
| SetVFlag(OverflowFrom(alu_out, rn_val, shifter_operand, false)); |
| } else { |
| // Format(instr, "movt'cond 'rd, 'imm"). |
| alu_out = (get_register(rd) & 0xffff) | |
| (instr->ImmedMovwMovtValue() << 16); |
| set_register(rd, alu_out); |
| } |
| break; |
| } |
| |
| case CMN: { |
| if (instr->HasS()) { |
| // Format(instr, "cmn'cond 'rn, 'shift_rm"); |
| // Format(instr, "cmn'cond 'rn, 'imm"); |
| alu_out = rn_val + shifter_operand; |
| SetNZFlags(alu_out); |
| SetCFlag(!CarryFrom(rn_val, shifter_operand)); |
| SetVFlag(OverflowFrom(alu_out, rn_val, shifter_operand, true)); |
| } else { |
| // Other instructions matching this pattern are handled in the |
| // miscellaneous instructions part above. |
| UNREACHABLE(); |
| } |
| break; |
| } |
| |
| case ORR: { |
| // Format(instr, "orr'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "orr'cond's 'rd, 'rn, 'imm"); |
| alu_out = rn_val | shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } |
| break; |
| } |
| |
| case MOV: { |
| // Format(instr, "mov'cond's 'rd, 'shift_rm"); |
| // Format(instr, "mov'cond's 'rd, 'imm"); |
| alu_out = shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } |
| break; |
| } |
| |
| case BIC: { |
| // Format(instr, "bic'cond's 'rd, 'rn, 'shift_rm"); |
| // Format(instr, "bic'cond's 'rd, 'rn, 'imm"); |
| alu_out = rn_val & ~shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } |
| break; |
| } |
| |
| case MVN: { |
| // Format(instr, "mvn'cond's 'rd, 'shift_rm"); |
| // Format(instr, "mvn'cond's 'rd, 'imm"); |
| alu_out = ~shifter_operand; |
| set_register(rd, alu_out); |
| if (instr->HasS()) { |
| SetNZFlags(alu_out); |
| SetCFlag(shifter_carry_out); |
| } |
| break; |
| } |
| |
| default: { |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } |
| } |
| |
| |
| void Simulator::DecodeType2(Instruction* instr) { |
| int rd = instr->RdValue(); |
| int rn = instr->RnValue(); |
| int32_t rn_val = get_register(rn); |
| int32_t im_val = instr->Offset12Value(); |
| int32_t addr = 0; |
| switch (instr->PUField()) { |
| case da_x: { |
| // Format(instr, "'memop'cond'b 'rd, ['rn], #-'off12"); |
| ASSERT(!instr->HasW()); |
| addr = rn_val; |
| rn_val -= im_val; |
| set_register(rn, rn_val); |
| break; |
| } |
| case ia_x: { |
| // Format(instr, "'memop'cond'b 'rd, ['rn], #+'off12"); |
| ASSERT(!instr->HasW()); |
| addr = rn_val; |
| rn_val += im_val; |
| set_register(rn, rn_val); |
| break; |
| } |
| case db_x: { |
| // Format(instr, "'memop'cond'b 'rd, ['rn, #-'off12]'w"); |
| rn_val -= im_val; |
| addr = rn_val; |
| if (instr->HasW()) { |
| set_register(rn, rn_val); |
| } |
| break; |
| } |
| case ib_x: { |
| // Format(instr, "'memop'cond'b 'rd, ['rn, #+'off12]'w"); |
| rn_val += im_val; |
| addr = rn_val; |
| if (instr->HasW()) { |
| set_register(rn, rn_val); |
| } |
| break; |
| } |
| default: { |
| UNREACHABLE(); |
| break; |
| } |
| } |
| if (instr->HasB()) { |
| if (instr->HasL()) { |
| byte val = ReadBU(addr); |
| set_register(rd, val); |
| } else { |
| byte val = get_register(rd); |
| WriteB(addr, val); |
| } |
| } else { |
| if (instr->HasL()) { |
| set_register(rd, ReadW(addr, instr)); |
| } else { |
| WriteW(addr, get_register(rd), instr); |
| } |
| } |
| } |
| |
| |
| void Simulator::DecodeType3(Instruction* instr) { |
| int rd = instr->RdValue(); |
| int rn = instr->RnValue(); |
| int32_t rn_val = get_register(rn); |
| bool shifter_carry_out = 0; |
| int32_t shifter_operand = GetShiftRm(instr, &shifter_carry_out); |
| int32_t addr = 0; |
| switch (instr->PUField()) { |
| case da_x: { |
| ASSERT(!instr->HasW()); |
| Format(instr, "'memop'cond'b 'rd, ['rn], -'shift_rm"); |
| UNIMPLEMENTED(); |
| break; |
| } |
| case ia_x: { |
| if (instr->HasW()) { |
| ASSERT(instr->Bits(5, 4) == 0x1); |
| |
| if (instr->Bit(22) == 0x1) { // USAT. |
| int32_t sat_pos = instr->Bits(20, 16); |
| int32_t sat_val = (1 << sat_pos) - 1; |
| int32_t shift = instr->Bits(11, 7); |
| int32_t shift_type = instr->Bit(6); |
| int32_t rm_val = get_register(instr->RmValue()); |
| if (shift_type == 0) { // LSL |
| rm_val <<= shift; |
| } else { // ASR |
| rm_val >>= shift; |
| } |
| // If saturation occurs, the Q flag should be set in the CPSR. |
| // There is no Q flag yet, and no instruction (MRS) to read the |
| // CPSR directly. |
| if (rm_val > sat_val) { |
| rm_val = sat_val; |
| } else if (rm_val < 0) { |
| rm_val = 0; |
| } |
| set_register(rd, rm_val); |
| } else { // SSAT. |
| UNIMPLEMENTED(); |
| } |
| return; |
| } else { |
| Format(instr, "'memop'cond'b 'rd, ['rn], +'shift_rm"); |
| UNIMPLEMENTED(); |
| } |
| break; |
| } |
| case db_x: { |
| // Format(instr, "'memop'cond'b 'rd, ['rn, -'shift_rm]'w"); |
| addr = rn_val - shifter_operand; |
| if (instr->HasW()) { |
| set_register(rn, addr); |
| } |
| break; |
| } |
| case ib_x: { |
| if (instr->HasW() && (instr->Bits(6, 4) == 0x5)) { |
| uint32_t widthminus1 = static_cast<uint32_t>(instr->Bits(20, 16)); |
| uint32_t lsbit = static_cast<uint32_t>(instr->Bits(11, 7)); |
| uint32_t msbit = widthminus1 + lsbit; |
| if (msbit <= 31) { |
| if (instr->Bit(22)) { |
| // ubfx - unsigned bitfield extract. |
| uint32_t rm_val = |
| static_cast<uint32_t>(get_register(instr->RmValue())); |
| uint32_t extr_val = rm_val << (31 - msbit); |
| extr_val = extr_val >> (31 - widthminus1); |
| set_register(instr->RdValue(), extr_val); |
| } else { |
| // sbfx - signed bitfield extract. |
| int32_t rm_val = get_register(instr->RmValue()); |
| int32_t extr_val = rm_val << (31 - msbit); |
| extr_val = extr_val >> (31 - widthminus1); |
| set_register(instr->RdValue(), extr_val); |
| } |
| } else { |
| UNREACHABLE(); |
| } |
| return; |
| } else if (!instr->HasW() && (instr->Bits(6, 4) == 0x1)) { |
| uint32_t lsbit = static_cast<uint32_t>(instr->Bits(11, 7)); |
| uint32_t msbit = static_cast<uint32_t>(instr->Bits(20, 16)); |
| if (msbit >= lsbit) { |
| // bfc or bfi - bitfield clear/insert. |
| uint32_t rd_val = |
| static_cast<uint32_t>(get_register(instr->RdValue())); |
| uint32_t bitcount = msbit - lsbit + 1; |
| uint32_t mask = (1 << bitcount) - 1; |
| rd_val &= ~(mask << lsbit); |
| if (instr->RmValue() != 15) { |
| // bfi - bitfield insert. |
| uint32_t rm_val = |
| static_cast<uint32_t>(get_register(instr->RmValue())); |
| rm_val &= mask; |
| rd_val |= rm_val << lsbit; |
| } |
| set_register(instr->RdValue(), rd_val); |
| } else { |
| UNREACHABLE(); |
| } |
| return; |
| } else { |
| // Format(instr, "'memop'cond'b 'rd, ['rn, +'shift_rm]'w"); |
| addr = rn_val + shifter_operand; |
| if (instr->HasW()) { |
| set_register(rn, addr); |
| } |
| } |
| break; |
| } |
| default: { |
| UNREACHABLE(); |
| break; |
| } |
| } |
| if (instr->HasB()) { |
| if (instr->HasL()) { |
| uint8_t byte = ReadB(addr); |
| set_register(rd, byte); |
| } else { |
| uint8_t byte = get_register(rd); |
| WriteB(addr, byte); |
| } |
| } else { |
| if (instr->HasL()) { |
| set_register(rd, ReadW(addr, instr)); |
| } else { |
| WriteW(addr, get_register(rd), instr); |
| } |
| } |
| } |
| |
| |
| void Simulator::DecodeType4(Instruction* instr) { |
| ASSERT(instr->Bit(22) == 0); // only allowed to be set in privileged mode |
| if (instr->HasL()) { |
| // Format(instr, "ldm'cond'pu 'rn'w, 'rlist"); |
| HandleRList(instr, true); |
| } else { |
| // Format(instr, "stm'cond'pu 'rn'w, 'rlist"); |
| HandleRList(instr, false); |
| } |
| } |
| |
| |
| void Simulator::DecodeType5(Instruction* instr) { |
| // Format(instr, "b'l'cond 'target"); |
| int off = (instr->SImmed24Value() << 2); |
| intptr_t pc_address = get_pc(); |
| if (instr->HasLink()) { |
| set_register(lr, pc_address + Instruction::kInstrSize); |
| } |
| int pc_reg = get_register(pc); |
| set_pc(pc_reg + off); |
| } |
| |
| |
| void Simulator::DecodeType6(Instruction* instr) { |
| DecodeType6CoprocessorIns(instr); |
| } |
| |
| |
| void Simulator::DecodeType7(Instruction* instr) { |
| if (instr->Bit(24) == 1) { |
| SoftwareInterrupt(instr); |
| } else { |
| DecodeTypeVFP(instr); |
| } |
| } |
| |
| |
| // void Simulator::DecodeTypeVFP(Instruction* instr) |
| // The Following ARMv7 VFPv instructions are currently supported. |
| // vmov :Sn = Rt |
| // vmov :Rt = Sn |
| // vcvt: Dd = Sm |
| // vcvt: Sd = Dm |
| // Dd = vabs(Dm) |
| // Dd = vneg(Dm) |
| // Dd = vadd(Dn, Dm) |
| // Dd = vsub(Dn, Dm) |
| // Dd = vmul(Dn, Dm) |
| // Dd = vdiv(Dn, Dm) |
| // vcmp(Dd, Dm) |
| // vmrs |
| // Dd = vsqrt(Dm) |
| void Simulator::DecodeTypeVFP(Instruction* instr) { |
| ASSERT((instr->TypeValue() == 7) && (instr->Bit(24) == 0x0) ); |
| ASSERT(instr->Bits(11, 9) == 0x5); |
| |
| // Obtain double precision register codes. |
| int vm = instr->VFPMRegValue(kDoublePrecision); |
| int vd = instr->VFPDRegValue(kDoublePrecision); |
| int vn = instr->VFPNRegValue(kDoublePrecision); |
| |
| if (instr->Bit(4) == 0) { |
| if (instr->Opc1Value() == 0x7) { |
| // Other data processing instructions |
| if ((instr->Opc2Value() == 0x0) && (instr->Opc3Value() == 0x1)) { |
| // vmov register to register. |
| if (instr->SzValue() == 0x1) { |
| int m = instr->VFPMRegValue(kDoublePrecision); |
| int d = instr->VFPDRegValue(kDoublePrecision); |
| set_d_register_from_double(d, get_double_from_d_register(m)); |
| } else { |
| int m = instr->VFPMRegValue(kSinglePrecision); |
| int d = instr->VFPDRegValue(kSinglePrecision); |
| set_s_register_from_float(d, get_float_from_s_register(m)); |
| } |
| } else if ((instr->Opc2Value() == 0x0) && (instr->Opc3Value() == 0x3)) { |
| // vabs |
| double dm_value = get_double_from_d_register(vm); |
| double dd_value = fabs(dm_value); |
| set_d_register_from_double(vd, dd_value); |
| } else if ((instr->Opc2Value() == 0x1) && (instr->Opc3Value() == 0x1)) { |
| // vneg |
| double dm_value = get_double_from_d_register(vm); |
| double dd_value = -dm_value; |
| set_d_register_from_double(vd, dd_value); |
| } else if ((instr->Opc2Value() == 0x7) && (instr->Opc3Value() == 0x3)) { |
| DecodeVCVTBetweenDoubleAndSingle(instr); |
| } else if ((instr->Opc2Value() == 0x8) && (instr->Opc3Value() & 0x1)) { |
| DecodeVCVTBetweenFloatingPointAndInteger(instr); |
| } else if (((instr->Opc2Value() >> 1) == 0x6) && |
| (instr->Opc3Value() & 0x1)) { |
| DecodeVCVTBetweenFloatingPointAndInteger(instr); |
| } else if (((instr->Opc2Value() == 0x4) || (instr->Opc2Value() == 0x5)) && |
| (instr->Opc3Value() & 0x1)) { |
| DecodeVCMP(instr); |
| } else if (((instr->Opc2Value() == 0x1)) && (instr->Opc3Value() == 0x3)) { |
| // vsqrt |
| double dm_value = get_double_from_d_register(vm); |
| double dd_value = sqrt(dm_value); |
| set_d_register_from_double(vd, dd_value); |
| } else if (instr->Opc3Value() == 0x0) { |
| // vmov immediate. |
| if (instr->SzValue() == 0x1) { |
| set_d_register_from_double(vd, instr->DoubleImmedVmov()); |
| } else { |
| UNREACHABLE(); // Not used by v8. |
| } |
| } else { |
| UNREACHABLE(); // Not used by V8. |
| } |
| } else if (instr->Opc1Value() == 0x3) { |
| if (instr->SzValue() != 0x1) { |
| UNREACHABLE(); // Not used by V8. |
| } |
| |
| if (instr->Opc3Value() & 0x1) { |
| // vsub |
| double dn_value = get_double_from_d_register(vn); |
| double dm_value = get_double_from_d_register(vm); |
| double dd_value = dn_value - dm_value; |
| set_d_register_from_double(vd, dd_value); |
| } else { |
| // vadd |
| double dn_value = get_double_from_d_register(vn); |
| double dm_value = get_double_from_d_register(vm); |
| double dd_value = dn_value + dm_value; |
| set_d_register_from_double(vd, dd_value); |
| } |
| } else if ((instr->Opc1Value() == 0x2) && !(instr->Opc3Value() & 0x1)) { |
| // vmul |
| if (instr->SzValue() != 0x1) { |
| UNREACHABLE(); // Not used by V8. |
| } |
| |
| double dn_value = get_double_from_d_register(vn); |
| double dm_value = get_double_from_d_register(vm); |
| double dd_value = dn_value * dm_value; |
| set_d_register_from_double(vd, dd_value); |
| } else if ((instr->Opc1Value() == 0x4) && !(instr->Opc3Value() & 0x1)) { |
| // vdiv |
| if (instr->SzValue() != 0x1) { |
| UNREACHABLE(); // Not used by V8. |
| } |
| |
| double dn_value = get_double_from_d_register(vn); |
| double dm_value = get_double_from_d_register(vm); |
| double dd_value = dn_value / dm_value; |
| div_zero_vfp_flag_ = (dm_value == 0); |
| set_d_register_from_double(vd, dd_value); |
| } else { |
| UNIMPLEMENTED(); // Not used by V8. |
| } |
| } else { |
| if ((instr->VCValue() == 0x0) && |
| (instr->VAValue() == 0x0)) { |
| DecodeVMOVBetweenCoreAndSinglePrecisionRegisters(instr); |
| } else if ((instr->VLValue() == 0x1) && |
| (instr->VCValue() == 0x0) && |
| (instr->VAValue() == 0x7) && |
| (instr->Bits(19, 16) == 0x1)) { |
| // vmrs |
| uint32_t rt = instr->RtValue(); |
| if (rt == 0xF) { |
| Copy_FPSCR_to_APSR(); |
| } else { |
| // Emulate FPSCR from the Simulator flags. |
| uint32_t fpscr = (n_flag_FPSCR_ << 31) | |
| (z_flag_FPSCR_ << 30) | |
| (c_flag_FPSCR_ << 29) | |
| (v_flag_FPSCR_ << 28) | |
| (inexact_vfp_flag_ << 4) | |
| (underflow_vfp_flag_ << 3) | |
| (overflow_vfp_flag_ << 2) | |
| (div_zero_vfp_flag_ << 1) | |
| (inv_op_vfp_flag_ << 0) | |
| (FPSCR_rounding_mode_); |
| set_register(rt, fpscr); |
| } |
| } else if ((instr->VLValue() == 0x0) && |
| (instr->VCValue() == 0x0) && |
| (instr->VAValue() == 0x7) && |
| (instr->Bits(19, 16) == 0x1)) { |
| // vmsr |
| uint32_t rt = instr->RtValue(); |
| if (rt == pc) { |
| UNREACHABLE(); |
| } else { |
| uint32_t rt_value = get_register(rt); |
| n_flag_FPSCR_ = (rt_value >> 31) & 1; |
| z_flag_FPSCR_ = (rt_value >> 30) & 1; |
| c_flag_FPSCR_ = (rt_value >> 29) & 1; |
| v_flag_FPSCR_ = (rt_value >> 28) & 1; |
| inexact_vfp_flag_ = (rt_value >> 4) & 1; |
| underflow_vfp_flag_ = (rt_value >> 3) & 1; |
| overflow_vfp_flag_ = (rt_value >> 2) & 1; |
| div_zero_vfp_flag_ = (rt_value >> 1) & 1; |
| inv_op_vfp_flag_ = (rt_value >> 0) & 1; |
| FPSCR_rounding_mode_ = |
| static_cast<VFPRoundingMode>((rt_value) & kVFPRoundingModeMask); |
| } |
| } else { |
| UNIMPLEMENTED(); // Not used by V8. |
| } |
| } |
| } |
| |
| |
| void Simulator::DecodeVMOVBetweenCoreAndSinglePrecisionRegisters( |
| Instruction* instr) { |
| ASSERT((instr->Bit(4) == 1) && (instr->VCValue() == 0x0) && |
| (instr->VAValue() == 0x0)); |
| |
| int t = instr->RtValue(); |
| int n = instr->VFPNRegValue(kSinglePrecision); |
| bool to_arm_register = (instr->VLValue() == 0x1); |
| |
| if (to_arm_register) { |
| int32_t int_value = get_sinteger_from_s_register(n); |
| set_register(t, int_value); |
| } else { |
| int32_t rs_val = get_register(t); |
| set_s_register_from_sinteger(n, rs_val); |
| } |
| } |
| |
| |
| void Simulator::DecodeVCMP(Instruction* instr) { |
| ASSERT((instr->Bit(4) == 0) && (instr->Opc1Value() == 0x7)); |
| ASSERT(((instr->Opc2Value() == 0x4) || (instr->Opc2Value() == 0x5)) && |
| (instr->Opc3Value() & 0x1)); |
| // Comparison. |
| |
| VFPRegPrecision precision = kSinglePrecision; |
| if (instr->SzValue() == 1) { |
| precision = kDoublePrecision; |
| } |
| |
| int d = instr->VFPDRegValue(precision); |
| int m = 0; |
| if (instr->Opc2Value() == 0x4) { |
| m = instr->VFPMRegValue(precision); |
| } |
| |
| if (precision == kDoublePrecision) { |
| double dd_value = get_double_from_d_register(d); |
| double dm_value = 0.0; |
| if (instr->Opc2Value() == 0x4) { |
| dm_value = get_double_from_d_register(m); |
| } |
| |
| // Raise exceptions for quiet NaNs if necessary. |
| if (instr->Bit(7) == 1) { |
| if (isnan(dd_value)) { |
| inv_op_vfp_flag_ = true; |
| } |
| } |
| |
| Compute_FPSCR_Flags(dd_value, dm_value); |
| } else { |
| UNIMPLEMENTED(); // Not used by V8. |
| } |
| } |
| |
| |
| void Simulator::DecodeVCVTBetweenDoubleAndSingle(Instruction* instr) { |
| ASSERT((instr->Bit(4) == 0) && (instr->Opc1Value() == 0x7)); |
| ASSERT((instr->Opc2Value() == 0x7) && (instr->Opc3Value() == 0x3)); |
| |
| VFPRegPrecision dst_precision = kDoublePrecision; |
| VFPRegPrecision src_precision = kSinglePrecision; |
| if (instr->SzValue() == 1) { |
| dst_precision = kSinglePrecision; |
| src_precision = kDoublePrecision; |
| } |
| |
| int dst = instr->VFPDRegValue(dst_precision); |
| int src = instr->VFPMRegValue(src_precision); |
| |
| if (dst_precision == kSinglePrecision) { |
| double val = get_double_from_d_register(src); |
| set_s_register_from_float(dst, static_cast<float>(val)); |
| } else { |
| float val = get_float_from_s_register(src); |
| set_d_register_from_double(dst, static_cast<double>(val)); |
| } |
| } |
| |
| bool get_inv_op_vfp_flag(VFPRoundingMode mode, |
| double val, |
| bool unsigned_) { |
| ASSERT((mode == RN) || (mode == RM) || (mode == RZ)); |
| double max_uint = static_cast<double>(0xffffffffu); |
| double max_int = static_cast<double>(kMaxInt); |
| double min_int = static_cast<double>(kMinInt); |
| |
| // Check for NaN. |
| if (val != val) { |
| return true; |
| } |
| |
| // Check for overflow. This code works because 32bit integers can be |
| // exactly represented by ieee-754 64bit floating-point values. |
| switch (mode) { |
| case RN: |
| return unsigned_ ? (val >= (max_uint + 0.5)) || |
| (val < -0.5) |
| : (val >= (max_int + 0.5)) || |
| (val < (min_int - 0.5)); |
| |
| case RM: |
| return unsigned_ ? (val >= (max_uint + 1.0)) || |
| (val < 0) |
| : (val >= (max_int + 1.0)) || |
| (val < min_int); |
| |
| case RZ: |
| return unsigned_ ? (val >= (max_uint + 1.0)) || |
| (val <= -1) |
| : (val >= (max_int + 1.0)) || |
| (val <= (min_int - 1.0)); |
| default: |
| UNREACHABLE(); |
| return true; |
| } |
| } |
| |
| |
| // We call this function only if we had a vfp invalid exception. |
| // It returns the correct saturated value. |
| int VFPConversionSaturate(double val, bool unsigned_res) { |
| if (val != val) { |
| return 0; |
| } else { |
| if (unsigned_res) { |
| return (val < 0) ? 0 : 0xffffffffu; |
| } else { |
| return (val < 0) ? kMinInt : kMaxInt; |
| } |
| } |
| } |
| |
| |
| void Simulator::DecodeVCVTBetweenFloatingPointAndInteger(Instruction* instr) { |
| ASSERT((instr->Bit(4) == 0) && (instr->Opc1Value() == 0x7) && |
| (instr->Bits(27, 23) == 0x1D)); |
| ASSERT(((instr->Opc2Value() == 0x8) && (instr->Opc3Value() & 0x1)) || |
| (((instr->Opc2Value() >> 1) == 0x6) && (instr->Opc3Value() & 0x1))); |
| |
| // Conversion between floating-point and integer. |
| bool to_integer = (instr->Bit(18) == 1); |
| |
| VFPRegPrecision src_precision = (instr->SzValue() == 1) ? kDoublePrecision |
| : kSinglePrecision; |
| |
| if (to_integer) { |
| // We are playing with code close to the C++ standard's limits below, |
| // hence the very simple code and heavy checks. |
| // |
| // Note: |
| // C++ defines default type casting from floating point to integer as |
| // (close to) rounding toward zero ("fractional part discarded"). |
| |
| int dst = instr->VFPDRegValue(kSinglePrecision); |
| int src = instr->VFPMRegValue(src_precision); |
| |
| // Bit 7 in vcvt instructions indicates if we should use the FPSCR rounding |
| // mode or the default Round to Zero mode. |
| VFPRoundingMode mode = (instr->Bit(7) != 1) ? FPSCR_rounding_mode_ |
| : RZ; |
| ASSERT((mode == RM) || (mode == RZ) || (mode == RN)); |
| |
| bool unsigned_integer = (instr->Bit(16) == 0); |
| bool double_precision = (src_precision == kDoublePrecision); |
| |
| double val = double_precision ? get_double_from_d_register(src) |
| : get_float_from_s_register(src); |
| |
| int temp = unsigned_integer ? static_cast<uint32_t>(val) |
| : static_cast<int32_t>(val); |
| |
| inv_op_vfp_flag_ = get_inv_op_vfp_flag(mode, val, unsigned_integer); |
| |
| double abs_diff = |
| unsigned_integer ? fabs(val - static_cast<uint32_t>(temp)) |
| : fabs(val - temp); |
| |
| inexact_vfp_flag_ = (abs_diff != 0); |
| |
| if (inv_op_vfp_flag_) { |
| temp = VFPConversionSaturate(val, unsigned_integer); |
| } else { |
| switch (mode) { |
| case RN: { |
| int val_sign = (val > 0) ? 1 : -1; |
| if (abs_diff > 0.5) { |
| temp += val_sign; |
| } else if (abs_diff == 0.5) { |
| // Round to even if exactly halfway. |
| temp = ((temp % 2) == 0) ? temp : temp + val_sign; |
| } |
| break; |
| } |
| |
| case RM: |
| temp = temp > val ? temp - 1 : temp; |
| break; |
| |
| case RZ: |
| // Nothing to do. |
| break; |
| |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| // Update the destination register. |
| set_s_register_from_sinteger(dst, temp); |
| |
| } else { |
| bool unsigned_integer = (instr->Bit(7) == 0); |
| |
| int dst = instr->VFPDRegValue(src_precision); |
| int src = instr->VFPMRegValue(kSinglePrecision); |
| |
| int val = get_sinteger_from_s_register(src); |
| |
| if (src_precision == kDoublePrecision) { |
| if (unsigned_integer) { |
| set_d_register_from_double(dst, |
| static_cast<double>((uint32_t)val)); |
| } else { |
| set_d_register_from_double(dst, static_cast<double>(val)); |
| } |
| } else { |
| if (unsigned_integer) { |
| set_s_register_from_float(dst, |
| static_cast<float>((uint32_t)val)); |
| } else { |
| set_s_register_from_float(dst, static_cast<float>(val)); |
| } |
| } |
| } |
| } |
| |
| |
| // void Simulator::DecodeType6CoprocessorIns(Instruction* instr) |
| // Decode Type 6 coprocessor instructions. |
| // Dm = vmov(Rt, Rt2) |
| // <Rt, Rt2> = vmov(Dm) |
| // Ddst = MEM(Rbase + 4*offset). |
| // MEM(Rbase + 4*offset) = Dsrc. |
| void Simulator::DecodeType6CoprocessorIns(Instruction* instr) { |
| ASSERT((instr->TypeValue() == 6)); |
| |
| if (instr->CoprocessorValue() == 0xA) { |
| switch (instr->OpcodeValue()) { |
| case 0x8: |
| case 0xA: |
| case 0xC: |
| case 0xE: { // Load and store single precision float to memory. |
| int rn = instr->RnValue(); |
| int vd = instr->VFPDRegValue(kSinglePrecision); |
| int offset = instr->Immed8Value(); |
| if (!instr->HasU()) { |
| offset = -offset; |
| } |
| |
| int32_t address = get_register(rn) + 4 * offset; |
| if (instr->HasL()) { |
| // Load double from memory: vldr. |
| set_s_register_from_sinteger(vd, ReadW(address, instr)); |
| } else { |
| // Store double to memory: vstr. |
| WriteW(address, get_sinteger_from_s_register(vd), instr); |
| } |
| break; |
| } |
| case 0x4: |
| case 0x5: |
| case 0x6: |
| case 0x7: |
| case 0x9: |
| case 0xB: |
| // Load/store multiple single from memory: vldm/vstm. |
| HandleVList(instr); |
| break; |
| default: |
| UNIMPLEMENTED(); // Not used by V8. |
| } |
| } else if (instr->CoprocessorValue() == 0xB) { |
| switch (instr->OpcodeValue()) { |
| case 0x2: |
| // Load and store double to two GP registers |
| if (instr->Bits(7, 4) != 0x1) { |
| UNIMPLEMENTED(); // Not used by V8. |
| } else { |
| int rt = instr->RtValue(); |
| int rn = instr->RnValue(); |
| int vm = instr->VmValue(); |
| if (instr->HasL()) { |
| int32_t rt_int_value = get_sinteger_from_s_register(2*vm); |
| int32_t rn_int_value = get_sinteger_from_s_register(2*vm+1); |
| |
| set_register(rt, rt_int_value); |
| set_register(rn, rn_int_value); |
| } else { |
| int32_t rs_val = get_register(rt); |
| int32_t rn_val = get_register(rn); |
| |
| set_s_register_from_sinteger(2*vm, rs_val); |
| set_s_register_from_sinteger((2*vm+1), rn_val); |
| } |
| } |
| break; |
| case 0x8: |
| case 0xC: { // Load and store double to memory. |
| int rn = instr->RnValue(); |
| int vd = instr->VdValue(); |
| int offset = instr->Immed8Value(); |
| if (!instr->HasU()) { |
| offset = -offset; |
| } |
| int32_t address = get_register(rn) + 4 * offset; |
| if (instr->HasL()) { |
| // Load double from memory: vldr. |
| set_s_register_from_sinteger(2*vd, ReadW(address, instr)); |
| set_s_register_from_sinteger(2*vd + 1, ReadW(address + 4, instr)); |
| } else { |
| // Store double to memory: vstr. |
| WriteW(address, get_sinteger_from_s_register(2*vd), instr); |
| WriteW(address + 4, get_sinteger_from_s_register(2*vd + 1), instr); |
| } |
| break; |
| } |
| case 0x4: |
| case 0x5: |
| case 0x9: |
| // Load/store multiple double from memory: vldm/vstm. |
| HandleVList(instr); |
| break; |
| default: |
| UNIMPLEMENTED(); // Not used by V8. |
| } |
| } else { |
| UNIMPLEMENTED(); // Not used by V8. |
| } |
| } |
| |
| |
| // Executes the current instruction. |
| void Simulator::InstructionDecode(Instruction* instr) { |
| if (v8::internal::FLAG_check_icache) { |
| CheckICache(isolate_->simulator_i_cache(), instr); |
| } |
| pc_modified_ = false; |
| if (::v8::internal::FLAG_trace_sim) { |
| disasm::NameConverter converter; |
| disasm::Disassembler dasm(converter); |
| // use a reasonably large buffer |
| v8::internal::EmbeddedVector<char, 256> buffer; |
| dasm.InstructionDecode(buffer, |
| reinterpret_cast<byte*>(instr)); |
| PrintF(" 0x%08x %s\n", reinterpret_cast<intptr_t>(instr), buffer.start()); |
| } |
| if (instr->ConditionField() == kSpecialCondition) { |
| UNIMPLEMENTED(); |
| } else if (ConditionallyExecute(instr)) { |
| switch (instr->TypeValue()) { |
| case 0: |
| case 1: { |
| DecodeType01(instr); |
| break; |
| } |
| case 2: { |
| DecodeType2(instr); |
| break; |
| } |
| case 3: { |
| DecodeType3(instr); |
| break; |
| } |
| case 4: { |
| DecodeType4(instr); |
| break; |
| } |
| case 5: { |
| DecodeType5(instr); |
| break; |
| } |
| case 6: { |
| DecodeType6(instr); |
| break; |
| } |
| case 7: { |
| DecodeType7(instr); |
| break; |
| } |
| default: { |
| UNIMPLEMENTED(); |
| break; |
| } |
| } |
| // If the instruction is a non taken conditional stop, we need to skip the |
| // inlined message address. |
| } else if (instr->IsStop()) { |
| set_pc(get_pc() + 2 * Instruction::kInstrSize); |
| } |
| if (!pc_modified_) { |
| set_register(pc, reinterpret_cast<int32_t>(instr) |
| + Instruction::kInstrSize); |
| } |
| } |
| |
| |
| void Simulator::Execute() { |
| // Get the PC to simulate. Cannot use the accessor here as we need the |
| // raw PC value and not the one used as input to arithmetic instructions. |
| int program_counter = get_pc(); |
| |
| if (::v8::internal::FLAG_stop_sim_at == 0) { |
| // Fast version of the dispatch loop without checking whether the simulator |
| // should be stopping at a particular executed instruction. |
| while (program_counter != end_sim_pc) { |
| Instruction* instr = reinterpret_cast<Instruction*>(program_counter); |
| icount_++; |
| InstructionDecode(instr); |
| program_counter = get_pc(); |
| } |
| } else { |
| // FLAG_stop_sim_at is at the non-default value. Stop in the debugger when |
| // we reach the particular instuction count. |
| while (program_counter != end_sim_pc) { |
| Instruction* instr = reinterpret_cast<Instruction*>(program_counter); |
| icount_++; |
| if (icount_ == ::v8::internal::FLAG_stop_sim_at) { |
| ArmDebugger dbg(this); |
| dbg.Debug(); |
| } else { |
| InstructionDecode(instr); |
| } |
| program_counter = get_pc(); |
| } |
| } |
| } |
| |
| |
| int32_t Simulator::Call(byte* entry, int argument_count, ...) { |
| va_list parameters; |
| va_start(parameters, argument_count); |
| // Set up arguments |
| |
| // First four arguments passed in registers. |
| ASSERT(argument_count >= 4); |
| set_register(r0, va_arg(parameters, int32_t)); |
| set_register(r1, va_arg(parameters, int32_t)); |
| set_register(r2, va_arg(parameters, int32_t)); |
| set_register(r3, va_arg(parameters, int32_t)); |
| |
| // Remaining arguments passed on stack. |
| int original_stack = get_register(sp); |
| // Compute position of stack on entry to generated code. |
| int entry_stack = (original_stack - (argument_count - 4) * sizeof(int32_t)); |
| if (OS::ActivationFrameAlignment() != 0) { |
| entry_stack &= -OS::ActivationFrameAlignment(); |
| } |
| // Store remaining arguments on stack, from low to high memory. |
| intptr_t* stack_argument = reinterpret_cast<intptr_t*>(entry_stack); |
| for (int i = 4; i < argument_count; i++) { |
| stack_argument[i - 4] = va_arg(parameters, int32_t); |
| } |
| va_end(parameters); |
| set_register(sp, entry_stack); |
| |
| // Prepare to execute the code at entry |
| set_register(pc, reinterpret_cast<int32_t>(entry)); |
| // Put down marker for end of simulation. The simulator will stop simulation |
| // when the PC reaches this value. By saving the "end simulation" value into |
| // the LR the simulation stops when returning to this call point. |
| set_register(lr, end_sim_pc); |
| |
| // Remember the values of callee-saved registers. |
| // The code below assumes that r9 is not used as sb (static base) in |
| // simulator code and therefore is regarded as a callee-saved register. |
| int32_t r4_val = get_register(r4); |
| int32_t r5_val = get_register(r5); |
| int32_t r6_val = get_register(r6); |
| int32_t r7_val = get_register(r7); |
| int32_t r8_val = get_register(r8); |
| int32_t r9_val = get_register(r9); |
| int32_t r10_val = get_register(r10); |
| int32_t r11_val = get_register(r11); |
| |
| // Set up the callee-saved registers with a known value. To be able to check |
| // that they are preserved properly across JS execution. |
| int32_t callee_saved_value = icount_; |
| set_register(r4, callee_saved_value); |
| set_register(r5, callee_saved_value); |
| set_register(r6, callee_saved_value); |
| set_register(r7, callee_saved_value); |
| set_register(r8, callee_saved_value); |
| set_register(r9, callee_saved_value); |
| set_register(r10, callee_saved_value); |
| set_register(r11, callee_saved_value); |
| |
| // Start the simulation |
| Execute(); |
| |
| // Check that the callee-saved registers have been preserved. |
| CHECK_EQ(callee_saved_value, get_register(r4)); |
| CHECK_EQ(callee_saved_value, get_register(r5)); |
| CHECK_EQ(callee_saved_value, get_register(r6)); |
| CHECK_EQ(callee_saved_value, get_register(r7)); |
| CHECK_EQ(callee_saved_value, get_register(r8)); |
| CHECK_EQ(callee_saved_value, get_register(r9)); |
| CHECK_EQ(callee_saved_value, get_register(r10)); |
| CHECK_EQ(callee_saved_value, get_register(r11)); |
| |
| // Restore callee-saved registers with the original value. |
| set_register(r4, r4_val); |
| set_register(r5, r5_val); |
| set_register(r6, r6_val); |
| set_register(r7, r7_val); |
| set_register(r8, r8_val); |
| set_register(r9, r9_val); |
| set_register(r10, r10_val); |
| set_register(r11, r11_val); |
| |
| // Pop stack passed arguments. |
| CHECK_EQ(entry_stack, get_register(sp)); |
| set_register(sp, original_stack); |
| |
| int32_t result = get_register(r0); |
| return result; |
| } |
| |
| |
| uintptr_t Simulator::PushAddress(uintptr_t address) { |
| int new_sp = get_register(sp) - sizeof(uintptr_t); |
| uintptr_t* stack_slot = reinterpret_cast<uintptr_t*>(new_sp); |
| *stack_slot = address; |
| set_register(sp, new_sp); |
| return new_sp; |
| } |
| |
| |
| uintptr_t Simulator::PopAddress() { |
| int current_sp = get_register(sp); |
| uintptr_t* stack_slot = reinterpret_cast<uintptr_t*>(current_sp); |
| uintptr_t address = *stack_slot; |
| set_register(sp, current_sp + sizeof(uintptr_t)); |
| return address; |
| } |
| |
| } } // namespace v8::internal |
| |
| #endif // USE_SIMULATOR |
| |
| #endif // V8_TARGET_ARCH_ARM |