| // Copyright 2012 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| // ------------------------------------------------------------------- |
| |
| var kMessages = { |
| // Error |
| cyclic_proto: ["Cyclic __proto__ value"], |
| code_gen_from_strings: ["%0"], |
| // TypeError |
| unexpected_token: ["Unexpected token ", "%0"], |
| unexpected_token_number: ["Unexpected number"], |
| unexpected_token_string: ["Unexpected string"], |
| unexpected_token_identifier: ["Unexpected identifier"], |
| unexpected_reserved: ["Unexpected reserved word"], |
| unexpected_strict_reserved: ["Unexpected strict mode reserved word"], |
| unexpected_eos: ["Unexpected end of input"], |
| malformed_regexp: ["Invalid regular expression: /", "%0", "/: ", "%1"], |
| unterminated_regexp: ["Invalid regular expression: missing /"], |
| regexp_flags: ["Cannot supply flags when constructing one RegExp from another"], |
| incompatible_method_receiver: ["Method ", "%0", " called on incompatible receiver ", "%1"], |
| invalid_lhs_in_assignment: ["Invalid left-hand side in assignment"], |
| invalid_lhs_in_for_in: ["Invalid left-hand side in for-in"], |
| invalid_lhs_in_postfix_op: ["Invalid left-hand side expression in postfix operation"], |
| invalid_lhs_in_prefix_op: ["Invalid left-hand side expression in prefix operation"], |
| multiple_defaults_in_switch: ["More than one default clause in switch statement"], |
| newline_after_throw: ["Illegal newline after throw"], |
| redeclaration: ["%0", " '", "%1", "' has already been declared"], |
| no_catch_or_finally: ["Missing catch or finally after try"], |
| unknown_label: ["Undefined label '", "%0", "'"], |
| uncaught_exception: ["Uncaught ", "%0"], |
| stack_trace: ["Stack Trace:\n", "%0"], |
| called_non_callable: ["%0", " is not a function"], |
| undefined_method: ["Object ", "%1", " has no method '", "%0", "'"], |
| property_not_function: ["Property '", "%0", "' of object ", "%1", " is not a function"], |
| cannot_convert_to_primitive: ["Cannot convert object to primitive value"], |
| not_constructor: ["%0", " is not a constructor"], |
| not_defined: ["%0", " is not defined"], |
| non_object_property_load: ["Cannot read property '", "%0", "' of ", "%1"], |
| non_object_property_store: ["Cannot set property '", "%0", "' of ", "%1"], |
| non_object_property_call: ["Cannot call method '", "%0", "' of ", "%1"], |
| with_expression: ["%0", " has no properties"], |
| illegal_invocation: ["Illegal invocation"], |
| no_setter_in_callback: ["Cannot set property ", "%0", " of ", "%1", " which has only a getter"], |
| apply_non_function: ["Function.prototype.apply was called on ", "%0", ", which is a ", "%1", " and not a function"], |
| apply_wrong_args: ["Function.prototype.apply: Arguments list has wrong type"], |
| invalid_in_operator_use: ["Cannot use 'in' operator to search for '", "%0", "' in ", "%1"], |
| instanceof_function_expected: ["Expecting a function in instanceof check, but got ", "%0"], |
| instanceof_nonobject_proto: ["Function has non-object prototype '", "%0", "' in instanceof check"], |
| null_to_object: ["Cannot convert null to object"], |
| reduce_no_initial: ["Reduce of empty array with no initial value"], |
| getter_must_be_callable: ["Getter must be a function: ", "%0"], |
| setter_must_be_callable: ["Setter must be a function: ", "%0"], |
| value_and_accessor: ["Invalid property. A property cannot both have accessors and be writable or have a value, ", "%0"], |
| proto_object_or_null: ["Object prototype may only be an Object or null"], |
| property_desc_object: ["Property description must be an object: ", "%0"], |
| redefine_disallowed: ["Cannot redefine property: ", "%0"], |
| define_disallowed: ["Cannot define property:", "%0", ", object is not extensible."], |
| non_extensible_proto: ["%0", " is not extensible"], |
| handler_non_object: ["Proxy.", "%0", " called with non-object as handler"], |
| proto_non_object: ["Proxy.", "%0", " called with non-object as prototype"], |
| trap_function_expected: ["Proxy.", "%0", " called with non-function for '", "%1", "' trap"], |
| handler_trap_missing: ["Proxy handler ", "%0", " has no '", "%1", "' trap"], |
| handler_trap_must_be_callable: ["Proxy handler ", "%0", " has non-callable '", "%1", "' trap"], |
| handler_returned_false: ["Proxy handler ", "%0", " returned false from '", "%1", "' trap"], |
| handler_returned_undefined: ["Proxy handler ", "%0", " returned undefined from '", "%1", "' trap"], |
| proxy_prop_not_configurable: ["Proxy handler ", "%0", " returned non-configurable descriptor for property '", "%2", "' from '", "%1", "' trap"], |
| proxy_non_object_prop_names: ["Trap '", "%1", "' returned non-object ", "%0"], |
| proxy_repeated_prop_name: ["Trap '", "%1", "' returned repeated property name '", "%2", "'"], |
| invalid_weakmap_key: ["Invalid value used as weak map key"], |
| not_date_object: ["this is not a Date object."], |
| observe_non_object: ["Object.", "%0", " cannot ", "%0", " non-object"], |
| observe_non_function: ["Object.", "%0", " cannot deliver to non-function"], |
| observe_callback_frozen: ["Object.observe cannot deliver to a frozen function object"], |
| observe_type_non_string: ["Invalid changeRecord with non-string 'type' property"], |
| observe_notify_non_notifier: ["notify called on non-notifier object"], |
| // RangeError |
| invalid_array_length: ["Invalid array length"], |
| stack_overflow: ["Maximum call stack size exceeded"], |
| invalid_time_value: ["Invalid time value"], |
| // SyntaxError |
| unable_to_parse: ["Parse error"], |
| invalid_regexp_flags: ["Invalid flags supplied to RegExp constructor '", "%0", "'"], |
| invalid_regexp: ["Invalid RegExp pattern /", "%0", "/"], |
| illegal_break: ["Illegal break statement"], |
| illegal_continue: ["Illegal continue statement"], |
| illegal_return: ["Illegal return statement"], |
| illegal_let: ["Illegal let declaration outside extended mode"], |
| error_loading_debugger: ["Error loading debugger"], |
| no_input_to_regexp: ["No input to ", "%0"], |
| invalid_json: ["String '", "%0", "' is not valid JSON"], |
| circular_structure: ["Converting circular structure to JSON"], |
| called_on_non_object: ["%0", " called on non-object"], |
| called_on_null_or_undefined: ["%0", " called on null or undefined"], |
| array_indexof_not_defined: ["Array.getIndexOf: Argument undefined"], |
| object_not_extensible: ["Can't add property ", "%0", ", object is not extensible"], |
| illegal_access: ["Illegal access"], |
| invalid_preparser_data: ["Invalid preparser data for function ", "%0"], |
| strict_mode_with: ["Strict mode code may not include a with statement"], |
| strict_catch_variable: ["Catch variable may not be eval or arguments in strict mode"], |
| too_many_arguments: ["Too many arguments in function call (only 32766 allowed)"], |
| too_many_parameters: ["Too many parameters in function definition (only 32766 allowed)"], |
| too_many_variables: ["Too many variables declared (only 131071 allowed)"], |
| strict_param_name: ["Parameter name eval or arguments is not allowed in strict mode"], |
| strict_param_dupe: ["Strict mode function may not have duplicate parameter names"], |
| strict_var_name: ["Variable name may not be eval or arguments in strict mode"], |
| strict_function_name: ["Function name may not be eval or arguments in strict mode"], |
| strict_octal_literal: ["Octal literals are not allowed in strict mode."], |
| strict_duplicate_property: ["Duplicate data property in object literal not allowed in strict mode"], |
| accessor_data_property: ["Object literal may not have data and accessor property with the same name"], |
| accessor_get_set: ["Object literal may not have multiple get/set accessors with the same name"], |
| strict_lhs_assignment: ["Assignment to eval or arguments is not allowed in strict mode"], |
| strict_lhs_postfix: ["Postfix increment/decrement may not have eval or arguments operand in strict mode"], |
| strict_lhs_prefix: ["Prefix increment/decrement may not have eval or arguments operand in strict mode"], |
| strict_reserved_word: ["Use of future reserved word in strict mode"], |
| strict_delete: ["Delete of an unqualified identifier in strict mode."], |
| strict_delete_property: ["Cannot delete property '", "%0", "' of ", "%1"], |
| strict_const: ["Use of const in strict mode."], |
| strict_function: ["In strict mode code, functions can only be declared at top level or immediately within another function." ], |
| strict_read_only_property: ["Cannot assign to read only property '", "%0", "' of ", "%1"], |
| strict_cannot_assign: ["Cannot assign to read only '", "%0", "' in strict mode"], |
| strict_poison_pill: ["'caller', 'callee', and 'arguments' properties may not be accessed on strict mode functions or the arguments objects for calls to them"], |
| strict_caller: ["Illegal access to a strict mode caller function."], |
| unprotected_let: ["Illegal let declaration in unprotected statement context."], |
| unprotected_const: ["Illegal const declaration in unprotected statement context."], |
| cant_prevent_ext_external_array_elements: ["Cannot prevent extension of an object with external array elements"], |
| redef_external_array_element: ["Cannot redefine a property of an object with external array elements"], |
| harmony_const_assign: ["Assignment to constant variable."], |
| invalid_module_path: ["Module does not export '", "%0", "', or export is not itself a module"], |
| module_type_error: ["Module '", "%0", "' used improperly"], |
| module_export_undefined: ["Export '", "%0", "' is not defined in module"], |
| }; |
| |
| |
| function FormatString(format, args) { |
| var result = ""; |
| var arg_num = 0; |
| for (var i = 0; i < format.length; i++) { |
| var str = format[i]; |
| if (str.length == 2 && %_StringCharCodeAt(str, 0) == 0x25) { |
| // Two-char string starts with "%". |
| var arg_num = (%_StringCharCodeAt(str, 1) - 0x30) >>> 0; |
| if (arg_num < 4) { |
| // str is one of %0, %1, %2 or %3. |
| try { |
| str = NoSideEffectToString(args[arg_num]); |
| } catch (e) { |
| if (%IsJSModule(args[arg_num])) |
| str = "module"; |
| else if (IS_SPEC_OBJECT(args[arg_num])) |
| str = "object"; |
| else |
| str = "#<error>"; |
| } |
| } |
| } |
| result += str; |
| } |
| return result; |
| } |
| |
| |
| function NoSideEffectToString(obj) { |
| if (IS_STRING(obj)) return obj; |
| if (IS_NUMBER(obj)) return %_NumberToString(obj); |
| if (IS_BOOLEAN(obj)) return x ? 'true' : 'false'; |
| if (IS_UNDEFINED(obj)) return 'undefined'; |
| if (IS_NULL(obj)) return 'null'; |
| if (IS_FUNCTION(obj)) return %_CallFunction(obj, FunctionToString); |
| if (IS_OBJECT(obj) && %GetDataProperty(obj, "toString") === ObjectToString) { |
| var constructor = obj.constructor; |
| if (typeof constructor == "function") { |
| var constructorName = constructor.name; |
| if (IS_STRING(constructorName) && constructorName !== "") { |
| return "#<" + constructorName + ">"; |
| } |
| } |
| } |
| if (IsNativeErrorObject(obj)) return %_CallFunction(obj, ErrorToString); |
| return %_CallFunction(obj, ObjectToString); |
| } |
| |
| |
| // To check if something is a native error we need to check the |
| // concrete native error types. It is not sufficient to use instanceof |
| // since it possible to create an object that has Error.prototype on |
| // its prototype chain. This is the case for DOMException for example. |
| function IsNativeErrorObject(obj) { |
| switch (%_ClassOf(obj)) { |
| case 'Error': |
| case 'EvalError': |
| case 'RangeError': |
| case 'ReferenceError': |
| case 'SyntaxError': |
| case 'TypeError': |
| case 'URIError': |
| return true; |
| } |
| return false; |
| } |
| |
| |
| // When formatting internally created error messages, do not |
| // invoke overwritten error toString methods but explicitly use |
| // the error to string method. This is to avoid leaking error |
| // objects between script tags in a browser setting. |
| function ToStringCheckErrorObject(obj) { |
| if (IsNativeErrorObject(obj)) { |
| return %_CallFunction(obj, ErrorToString); |
| } else { |
| return ToString(obj); |
| } |
| } |
| |
| |
| function ToDetailString(obj) { |
| if (obj != null && IS_OBJECT(obj) && obj.toString === ObjectToString) { |
| var constructor = obj.constructor; |
| if (typeof constructor == "function") { |
| var constructorName = constructor.name; |
| if (IS_STRING(constructorName) && constructorName !== "") { |
| return "#<" + constructorName + ">"; |
| } |
| } |
| } |
| return ToStringCheckErrorObject(obj); |
| } |
| |
| |
| function MakeGenericError(constructor, type, args) { |
| if (IS_UNDEFINED(args)) args = []; |
| return new constructor(FormatMessage(type, args)); |
| } |
| |
| |
| /** |
| * Set up the Script function and constructor. |
| */ |
| %FunctionSetInstanceClassName(Script, 'Script'); |
| %SetProperty(Script.prototype, 'constructor', Script, |
| DONT_ENUM | DONT_DELETE | READ_ONLY); |
| %SetCode(Script, function(x) { |
| // Script objects can only be created by the VM. |
| throw new $Error("Not supported"); |
| }); |
| |
| |
| // Helper functions; called from the runtime system. |
| function FormatMessage(type, args) { |
| var format = kMessages[type]; |
| if (!format) return "<unknown message " + type + ">"; |
| return FormatString(format, args); |
| } |
| |
| |
| function GetLineNumber(message) { |
| var start_position = %MessageGetStartPosition(message); |
| if (start_position == -1) return kNoLineNumberInfo; |
| var script = %MessageGetScript(message); |
| var location = script.locationFromPosition(start_position, true); |
| if (location == null) return kNoLineNumberInfo; |
| return location.line + 1; |
| } |
| |
| |
| // Returns the source code line containing the given source |
| // position, or the empty string if the position is invalid. |
| function GetSourceLine(message) { |
| var script = %MessageGetScript(message); |
| var start_position = %MessageGetStartPosition(message); |
| var location = script.locationFromPosition(start_position, true); |
| if (location == null) return ""; |
| location.restrict(); |
| return location.sourceText(); |
| } |
| |
| |
| function MakeTypeError(type, args) { |
| return MakeGenericError($TypeError, type, args); |
| } |
| |
| |
| function MakeRangeError(type, args) { |
| return MakeGenericError($RangeError, type, args); |
| } |
| |
| |
| function MakeSyntaxError(type, args) { |
| return MakeGenericError($SyntaxError, type, args); |
| } |
| |
| |
| function MakeReferenceError(type, args) { |
| return MakeGenericError($ReferenceError, type, args); |
| } |
| |
| |
| function MakeEvalError(type, args) { |
| return MakeGenericError($EvalError, type, args); |
| } |
| |
| |
| function MakeError(type, args) { |
| return MakeGenericError($Error, type, args); |
| } |
| |
| /** |
| * Find a line number given a specific source position. |
| * @param {number} position The source position. |
| * @return {number} 0 if input too small, -1 if input too large, |
| else the line number. |
| */ |
| function ScriptLineFromPosition(position) { |
| var lower = 0; |
| var upper = this.lineCount() - 1; |
| var line_ends = this.line_ends; |
| |
| // We'll never find invalid positions so bail right away. |
| if (position > line_ends[upper]) { |
| return -1; |
| } |
| |
| // This means we don't have to safe-guard indexing line_ends[i - 1]. |
| if (position <= line_ends[0]) { |
| return 0; |
| } |
| |
| // Binary search to find line # from position range. |
| while (upper >= 1) { |
| var i = (lower + upper) >> 1; |
| |
| if (position > line_ends[i]) { |
| lower = i + 1; |
| } else if (position <= line_ends[i - 1]) { |
| upper = i - 1; |
| } else { |
| return i; |
| } |
| } |
| |
| return -1; |
| } |
| |
| /** |
| * Get information on a specific source position. |
| * @param {number} position The source position |
| * @param {boolean} include_resource_offset Set to true to have the resource |
| * offset added to the location |
| * @return {SourceLocation} |
| * If line is negative or not in the source null is returned. |
| */ |
| function ScriptLocationFromPosition(position, |
| include_resource_offset) { |
| var line = this.lineFromPosition(position); |
| if (line == -1) return null; |
| |
| // Determine start, end and column. |
| var line_ends = this.line_ends; |
| var start = line == 0 ? 0 : line_ends[line - 1] + 1; |
| var end = line_ends[line]; |
| if (end > 0 && %_CallFunction(this.source, end - 1, StringCharAt) == '\r') { |
| end--; |
| } |
| var column = position - start; |
| |
| // Adjust according to the offset within the resource. |
| if (include_resource_offset) { |
| line += this.line_offset; |
| if (line == this.line_offset) { |
| column += this.column_offset; |
| } |
| } |
| |
| return new SourceLocation(this, position, line, column, start, end); |
| } |
| |
| |
| /** |
| * Get information on a specific source line and column possibly offset by a |
| * fixed source position. This function is used to find a source position from |
| * a line and column position. The fixed source position offset is typically |
| * used to find a source position in a function based on a line and column in |
| * the source for the function alone. The offset passed will then be the |
| * start position of the source for the function within the full script source. |
| * @param {number} opt_line The line within the source. Default value is 0 |
| * @param {number} opt_column The column in within the line. Default value is 0 |
| * @param {number} opt_offset_position The offset from the begining of the |
| * source from where the line and column calculation starts. |
| * Default value is 0 |
| * @return {SourceLocation} |
| * If line is negative or not in the source null is returned. |
| */ |
| function ScriptLocationFromLine(opt_line, opt_column, opt_offset_position) { |
| // Default is the first line in the script. Lines in the script is relative |
| // to the offset within the resource. |
| var line = 0; |
| if (!IS_UNDEFINED(opt_line)) { |
| line = opt_line - this.line_offset; |
| } |
| |
| // Default is first column. If on the first line add the offset within the |
| // resource. |
| var column = opt_column || 0; |
| if (line == 0) { |
| column -= this.column_offset; |
| } |
| |
| var offset_position = opt_offset_position || 0; |
| if (line < 0 || column < 0 || offset_position < 0) return null; |
| if (line == 0) { |
| return this.locationFromPosition(offset_position + column, false); |
| } else { |
| // Find the line where the offset position is located. |
| var offset_line = this.lineFromPosition(offset_position); |
| |
| if (offset_line == -1 || offset_line + line >= this.lineCount()) { |
| return null; |
| } |
| |
| return this.locationFromPosition( |
| this.line_ends[offset_line + line - 1] + 1 + column); // line > 0 here. |
| } |
| } |
| |
| |
| /** |
| * Get a slice of source code from the script. The boundaries for the slice is |
| * specified in lines. |
| * @param {number} opt_from_line The first line (zero bound) in the slice. |
| * Default is 0 |
| * @param {number} opt_to_column The last line (zero bound) in the slice (non |
| * inclusive). Default is the number of lines in the script |
| * @return {SourceSlice} The source slice or null of the parameters where |
| * invalid |
| */ |
| function ScriptSourceSlice(opt_from_line, opt_to_line) { |
| var from_line = IS_UNDEFINED(opt_from_line) ? this.line_offset |
| : opt_from_line; |
| var to_line = IS_UNDEFINED(opt_to_line) ? this.line_offset + this.lineCount() |
| : opt_to_line; |
| |
| // Adjust according to the offset within the resource. |
| from_line -= this.line_offset; |
| to_line -= this.line_offset; |
| if (from_line < 0) from_line = 0; |
| if (to_line > this.lineCount()) to_line = this.lineCount(); |
| |
| // Check parameters. |
| if (from_line >= this.lineCount() || |
| to_line < 0 || |
| from_line > to_line) { |
| return null; |
| } |
| |
| var line_ends = this.line_ends; |
| var from_position = from_line == 0 ? 0 : line_ends[from_line - 1] + 1; |
| var to_position = to_line == 0 ? 0 : line_ends[to_line - 1] + 1; |
| |
| // Return a source slice with line numbers re-adjusted to the resource. |
| return new SourceSlice(this, |
| from_line + this.line_offset, |
| to_line + this.line_offset, |
| from_position, to_position); |
| } |
| |
| |
| function ScriptSourceLine(opt_line) { |
| // Default is the first line in the script. Lines in the script are relative |
| // to the offset within the resource. |
| var line = 0; |
| if (!IS_UNDEFINED(opt_line)) { |
| line = opt_line - this.line_offset; |
| } |
| |
| // Check parameter. |
| if (line < 0 || this.lineCount() <= line) { |
| return null; |
| } |
| |
| // Return the source line. |
| var line_ends = this.line_ends; |
| var start = line == 0 ? 0 : line_ends[line - 1] + 1; |
| var end = line_ends[line]; |
| return %_CallFunction(this.source, start, end, StringSubstring); |
| } |
| |
| |
| /** |
| * Returns the number of source lines. |
| * @return {number} |
| * Number of source lines. |
| */ |
| function ScriptLineCount() { |
| // Return number of source lines. |
| return this.line_ends.length; |
| } |
| |
| |
| /** |
| * If sourceURL comment is available and script starts at zero returns sourceURL |
| * comment contents. Otherwise, script name is returned. See |
| * http://fbug.googlecode.com/svn/branches/firebug1.1/docs/ReleaseNotes_1.1.txt |
| * for details on using //@ sourceURL comment to identify scritps that don't |
| * have name. |
| * |
| * @return {?string} script name if present, value for //@ sourceURL comment |
| * otherwise. |
| */ |
| function ScriptNameOrSourceURL() { |
| if (this.line_offset > 0 || this.column_offset > 0) { |
| return this.name; |
| } |
| |
| // The result is cached as on long scripts it takes noticable time to search |
| // for the sourceURL. |
| if (this.hasCachedNameOrSourceURL) { |
| return this.cachedNameOrSourceURL; |
| } |
| this.hasCachedNameOrSourceURL = true; |
| |
| // TODO(608): the spaces in a regexp below had to be escaped as \040 |
| // because this file is being processed by js2c whose handling of spaces |
| // in regexps is broken. Also, ['"] are excluded from allowed URLs to |
| // avoid matches against sources that invoke evals with sourceURL. |
| // A better solution would be to detect these special comments in |
| // the scanner/parser. |
| var source = ToString(this.source); |
| var sourceUrlPos = %StringIndexOf(source, "sourceURL=", 0); |
| this.cachedNameOrSourceURL = this.name; |
| if (sourceUrlPos > 4) { |
| var sourceUrlPattern = |
| /\/\/@[\040\t]sourceURL=[\040\t]*([^\s\'\"]*)[\040\t]*$/gm; |
| // Don't reuse lastMatchInfo here, so we create a new array with room |
| // for four captures (array with length one longer than the index |
| // of the fourth capture, where the numbering is zero-based). |
| var matchInfo = new InternalArray(CAPTURE(3) + 1); |
| var match = |
| %_RegExpExec(sourceUrlPattern, source, sourceUrlPos - 4, matchInfo); |
| if (match) { |
| this.cachedNameOrSourceURL = |
| SubString(source, matchInfo[CAPTURE(2)], matchInfo[CAPTURE(3)]); |
| } |
| } |
| return this.cachedNameOrSourceURL; |
| } |
| |
| |
| SetUpLockedPrototype(Script, |
| $Array("source", "name", "line_ends", "line_offset", "column_offset", |
| "cachedNameOrSourceURL", "hasCachedNameOrSourceURL" ), |
| $Array( |
| "lineFromPosition", ScriptLineFromPosition, |
| "locationFromPosition", ScriptLocationFromPosition, |
| "locationFromLine", ScriptLocationFromLine, |
| "sourceSlice", ScriptSourceSlice, |
| "sourceLine", ScriptSourceLine, |
| "lineCount", ScriptLineCount, |
| "nameOrSourceURL", ScriptNameOrSourceURL |
| ) |
| ); |
| |
| |
| /** |
| * Class for source location. A source location is a position within some |
| * source with the following properties: |
| * script : script object for the source |
| * line : source line number |
| * column : source column within the line |
| * position : position within the source |
| * start : position of start of source context (inclusive) |
| * end : position of end of source context (not inclusive) |
| * Source text for the source context is the character interval |
| * [start, end[. In most cases end will point to a newline character. |
| * It might point just past the final position of the source if the last |
| * source line does not end with a newline character. |
| * @param {Script} script The Script object for which this is a location |
| * @param {number} position Source position for the location |
| * @param {number} line The line number for the location |
| * @param {number} column The column within the line for the location |
| * @param {number} start Source position for start of source context |
| * @param {number} end Source position for end of source context |
| * @constructor |
| */ |
| function SourceLocation(script, position, line, column, start, end) { |
| this.script = script; |
| this.position = position; |
| this.line = line; |
| this.column = column; |
| this.start = start; |
| this.end = end; |
| } |
| |
| var kLineLengthLimit = 78; |
| |
| /** |
| * Restrict source location start and end positions to make the source slice |
| * no more that a certain number of characters wide. |
| * @param {number} opt_limit The with limit of the source text with a default |
| * of 78 |
| * @param {number} opt_before The number of characters to prefer before the |
| * position with a default value of 10 less that the limit |
| */ |
| function SourceLocationRestrict(opt_limit, opt_before) { |
| // Find the actual limit to use. |
| var limit; |
| var before; |
| if (!IS_UNDEFINED(opt_limit)) { |
| limit = opt_limit; |
| } else { |
| limit = kLineLengthLimit; |
| } |
| if (!IS_UNDEFINED(opt_before)) { |
| before = opt_before; |
| } else { |
| // If no before is specified center for small limits and perfer more source |
| // before the the position that after for longer limits. |
| if (limit <= 20) { |
| before = $floor(limit / 2); |
| } else { |
| before = limit - 10; |
| } |
| } |
| if (before >= limit) { |
| before = limit - 1; |
| } |
| |
| // If the [start, end[ interval is too big we restrict |
| // it in one or both ends. We make sure to always produce |
| // restricted intervals of maximum allowed size. |
| if (this.end - this.start > limit) { |
| var start_limit = this.position - before; |
| var end_limit = this.position + limit - before; |
| if (this.start < start_limit && end_limit < this.end) { |
| this.start = start_limit; |
| this.end = end_limit; |
| } else if (this.start < start_limit) { |
| this.start = this.end - limit; |
| } else { |
| this.end = this.start + limit; |
| } |
| } |
| } |
| |
| |
| /** |
| * Get the source text for a SourceLocation |
| * @return {String} |
| * Source text for this location. |
| */ |
| function SourceLocationSourceText() { |
| return %_CallFunction(this.script.source, |
| this.start, |
| this.end, |
| StringSubstring); |
| } |
| |
| |
| SetUpLockedPrototype(SourceLocation, |
| $Array("script", "position", "line", "column", "start", "end"), |
| $Array( |
| "restrict", SourceLocationRestrict, |
| "sourceText", SourceLocationSourceText |
| ) |
| ); |
| |
| |
| /** |
| * Class for a source slice. A source slice is a part of a script source with |
| * the following properties: |
| * script : script object for the source |
| * from_line : line number for the first line in the slice |
| * to_line : source line number for the last line in the slice |
| * from_position : position of the first character in the slice |
| * to_position : position of the last character in the slice |
| * The to_line and to_position are not included in the slice, that is the lines |
| * in the slice are [from_line, to_line[. Likewise the characters in the slice |
| * are [from_position, to_position[. |
| * @param {Script} script The Script object for the source slice |
| * @param {number} from_line |
| * @param {number} to_line |
| * @param {number} from_position |
| * @param {number} to_position |
| * @constructor |
| */ |
| function SourceSlice(script, from_line, to_line, from_position, to_position) { |
| this.script = script; |
| this.from_line = from_line; |
| this.to_line = to_line; |
| this.from_position = from_position; |
| this.to_position = to_position; |
| } |
| |
| /** |
| * Get the source text for a SourceSlice |
| * @return {String} Source text for this slice. The last line will include |
| * the line terminating characters (if any) |
| */ |
| function SourceSliceSourceText() { |
| return %_CallFunction(this.script.source, |
| this.from_position, |
| this.to_position, |
| StringSubstring); |
| } |
| |
| SetUpLockedPrototype(SourceSlice, |
| $Array("script", "from_line", "to_line", "from_position", "to_position"), |
| $Array("sourceText", SourceSliceSourceText) |
| ); |
| |
| |
| // Returns the offset of the given position within the containing |
| // line. |
| function GetPositionInLine(message) { |
| var script = %MessageGetScript(message); |
| var start_position = %MessageGetStartPosition(message); |
| var location = script.locationFromPosition(start_position, false); |
| if (location == null) return -1; |
| location.restrict(); |
| return start_position - location.start; |
| } |
| |
| |
| function GetStackTraceLine(recv, fun, pos, isGlobal) { |
| return new CallSite(recv, fun, pos).toString(); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| // Error implementation |
| |
| function CallSite(receiver, fun, pos) { |
| this.receiver = receiver; |
| this.fun = fun; |
| this.pos = pos; |
| } |
| |
| function CallSiteGetThis() { |
| return this.receiver; |
| } |
| |
| function CallSiteGetTypeName() { |
| return GetTypeName(this, false); |
| } |
| |
| function CallSiteIsToplevel() { |
| if (this.receiver == null) { |
| return true; |
| } |
| return IS_GLOBAL(this.receiver); |
| } |
| |
| function CallSiteIsEval() { |
| var script = %FunctionGetScript(this.fun); |
| return script && script.compilation_type == COMPILATION_TYPE_EVAL; |
| } |
| |
| function CallSiteGetEvalOrigin() { |
| var script = %FunctionGetScript(this.fun); |
| return FormatEvalOrigin(script); |
| } |
| |
| function CallSiteGetScriptNameOrSourceURL() { |
| var script = %FunctionGetScript(this.fun); |
| return script ? script.nameOrSourceURL() : null; |
| } |
| |
| function CallSiteGetFunction() { |
| return this.fun; |
| } |
| |
| function CallSiteGetFunctionName() { |
| // See if the function knows its own name |
| var name = this.fun.name; |
| if (name) { |
| return name; |
| } |
| name = %FunctionGetInferredName(this.fun); |
| if (name) { |
| return name; |
| } |
| // Maybe this is an evaluation? |
| var script = %FunctionGetScript(this.fun); |
| if (script && script.compilation_type == COMPILATION_TYPE_EVAL) { |
| return "eval"; |
| } |
| return null; |
| } |
| |
| function CallSiteGetMethodName() { |
| // See if we can find a unique property on the receiver that holds |
| // this function. |
| var ownName = this.fun.name; |
| if (ownName && this.receiver && |
| (%_CallFunction(this.receiver, |
| ownName, |
| ObjectLookupGetter) === this.fun || |
| %_CallFunction(this.receiver, |
| ownName, |
| ObjectLookupSetter) === this.fun || |
| this.receiver[ownName] === this.fun)) { |
| // To handle DontEnum properties we guess that the method has |
| // the same name as the function. |
| return ownName; |
| } |
| var name = null; |
| for (var prop in this.receiver) { |
| if (%_CallFunction(this.receiver, prop, ObjectLookupGetter) === this.fun || |
| %_CallFunction(this.receiver, prop, ObjectLookupSetter) === this.fun || |
| (!%_CallFunction(this.receiver, prop, ObjectLookupGetter) && |
| this.receiver[prop] === this.fun)) { |
| // If we find more than one match bail out to avoid confusion. |
| if (name) { |
| return null; |
| } |
| name = prop; |
| } |
| } |
| if (name) { |
| return name; |
| } |
| return null; |
| } |
| |
| function CallSiteGetFileName() { |
| var script = %FunctionGetScript(this.fun); |
| return script ? script.name : null; |
| } |
| |
| function CallSiteGetLineNumber() { |
| if (this.pos == -1) { |
| return null; |
| } |
| var script = %FunctionGetScript(this.fun); |
| var location = null; |
| if (script) { |
| location = script.locationFromPosition(this.pos, true); |
| } |
| return location ? location.line + 1 : null; |
| } |
| |
| function CallSiteGetColumnNumber() { |
| if (this.pos == -1) { |
| return null; |
| } |
| var script = %FunctionGetScript(this.fun); |
| var location = null; |
| if (script) { |
| location = script.locationFromPosition(this.pos, true); |
| } |
| return location ? location.column + 1: null; |
| } |
| |
| function CallSiteIsNative() { |
| var script = %FunctionGetScript(this.fun); |
| return script ? (script.type == TYPE_NATIVE) : false; |
| } |
| |
| function CallSiteGetPosition() { |
| return this.pos; |
| } |
| |
| function CallSiteIsConstructor() { |
| var constructor = this.receiver ? this.receiver.constructor : null; |
| if (!constructor) { |
| return false; |
| } |
| return this.fun === constructor; |
| } |
| |
| function CallSiteToString() { |
| var fileName; |
| var fileLocation = ""; |
| if (this.isNative()) { |
| fileLocation = "native"; |
| } else { |
| if (this.isEval()) { |
| fileName = this.getScriptNameOrSourceURL(); |
| if (!fileName) { |
| fileLocation = this.getEvalOrigin(); |
| fileLocation += ", "; // Expecting source position to follow. |
| } |
| } else { |
| fileName = this.getFileName(); |
| } |
| |
| if (fileName) { |
| fileLocation += fileName; |
| } else { |
| // Source code does not originate from a file and is not native, but we |
| // can still get the source position inside the source string, e.g. in |
| // an eval string. |
| fileLocation += "<anonymous>"; |
| } |
| var lineNumber = this.getLineNumber(); |
| if (lineNumber != null) { |
| fileLocation += ":" + lineNumber; |
| var columnNumber = this.getColumnNumber(); |
| if (columnNumber) { |
| fileLocation += ":" + columnNumber; |
| } |
| } |
| } |
| |
| var line = ""; |
| var functionName = this.getFunctionName(); |
| var addSuffix = true; |
| var isConstructor = this.isConstructor(); |
| var isMethodCall = !(this.isToplevel() || isConstructor); |
| if (isMethodCall) { |
| var typeName = GetTypeName(this, true); |
| var methodName = this.getMethodName(); |
| if (functionName) { |
| if (typeName && functionName.indexOf(typeName) != 0) { |
| line += typeName + "."; |
| } |
| line += functionName; |
| if (methodName && functionName.lastIndexOf("." + methodName) != |
| functionName.length - methodName.length - 1) { |
| line += " [as " + methodName + "]"; |
| } |
| } else { |
| line += typeName + "." + (methodName || "<anonymous>"); |
| } |
| } else if (isConstructor) { |
| line += "new " + (functionName || "<anonymous>"); |
| } else if (functionName) { |
| line += functionName; |
| } else { |
| line += fileLocation; |
| addSuffix = false; |
| } |
| if (addSuffix) { |
| line += " (" + fileLocation + ")"; |
| } |
| return line; |
| } |
| |
| SetUpLockedPrototype(CallSite, $Array("receiver", "fun", "pos"), $Array( |
| "getThis", CallSiteGetThis, |
| "getTypeName", CallSiteGetTypeName, |
| "isToplevel", CallSiteIsToplevel, |
| "isEval", CallSiteIsEval, |
| "getEvalOrigin", CallSiteGetEvalOrigin, |
| "getScriptNameOrSourceURL", CallSiteGetScriptNameOrSourceURL, |
| "getFunction", CallSiteGetFunction, |
| "getFunctionName", CallSiteGetFunctionName, |
| "getMethodName", CallSiteGetMethodName, |
| "getFileName", CallSiteGetFileName, |
| "getLineNumber", CallSiteGetLineNumber, |
| "getColumnNumber", CallSiteGetColumnNumber, |
| "isNative", CallSiteIsNative, |
| "getPosition", CallSiteGetPosition, |
| "isConstructor", CallSiteIsConstructor, |
| "toString", CallSiteToString |
| )); |
| |
| |
| function FormatEvalOrigin(script) { |
| var sourceURL = script.nameOrSourceURL(); |
| if (sourceURL) { |
| return sourceURL; |
| } |
| |
| var eval_origin = "eval at "; |
| if (script.eval_from_function_name) { |
| eval_origin += script.eval_from_function_name; |
| } else { |
| eval_origin += "<anonymous>"; |
| } |
| |
| var eval_from_script = script.eval_from_script; |
| if (eval_from_script) { |
| if (eval_from_script.compilation_type == COMPILATION_TYPE_EVAL) { |
| // eval script originated from another eval. |
| eval_origin += " (" + FormatEvalOrigin(eval_from_script) + ")"; |
| } else { |
| // eval script originated from "real" source. |
| if (eval_from_script.name) { |
| eval_origin += " (" + eval_from_script.name; |
| var location = eval_from_script.locationFromPosition( |
| script.eval_from_script_position, true); |
| if (location) { |
| eval_origin += ":" + (location.line + 1); |
| eval_origin += ":" + (location.column + 1); |
| } |
| eval_origin += ")"; |
| } else { |
| eval_origin += " (unknown source)"; |
| } |
| } |
| } |
| |
| return eval_origin; |
| } |
| |
| function FormatStackTrace(error, frames) { |
| var lines = []; |
| try { |
| lines.push(error.toString()); |
| } catch (e) { |
| try { |
| lines.push("<error: " + e + ">"); |
| } catch (ee) { |
| lines.push("<error>"); |
| } |
| } |
| for (var i = 0; i < frames.length; i++) { |
| var frame = frames[i]; |
| var line; |
| try { |
| line = frame.toString(); |
| } catch (e) { |
| try { |
| line = "<error: " + e + ">"; |
| } catch (ee) { |
| // Any code that reaches this point is seriously nasty! |
| line = "<error>"; |
| } |
| } |
| lines.push(" at " + line); |
| } |
| return lines.join("\n"); |
| } |
| |
| function FormatRawStackTrace(error, raw_stack) { |
| var frames = [ ]; |
| for (var i = 0; i < raw_stack.length; i += 4) { |
| var recv = raw_stack[i]; |
| var fun = raw_stack[i + 1]; |
| var code = raw_stack[i + 2]; |
| var pc = raw_stack[i + 3]; |
| var pos = %FunctionGetPositionForOffset(code, pc); |
| frames.push(new CallSite(recv, fun, pos)); |
| } |
| if (IS_FUNCTION($Error.prepareStackTrace)) { |
| return $Error.prepareStackTrace(error, frames); |
| } else { |
| return FormatStackTrace(error, frames); |
| } |
| } |
| |
| function GetTypeName(obj, requireConstructor) { |
| var constructor = obj.receiver.constructor; |
| if (!constructor) { |
| return requireConstructor ? null : |
| %_CallFunction(obj.receiver, ObjectToString); |
| } |
| var constructorName = constructor.name; |
| if (!constructorName) { |
| return requireConstructor ? null : |
| %_CallFunction(obj.receiver, ObjectToString); |
| } |
| return constructorName; |
| } |
| |
| function captureStackTrace(obj, cons_opt) { |
| var stackTraceLimit = $Error.stackTraceLimit; |
| if (!stackTraceLimit || !IS_NUMBER(stackTraceLimit)) return; |
| if (stackTraceLimit < 0 || stackTraceLimit > 10000) { |
| stackTraceLimit = 10000; |
| } |
| var raw_stack = %CollectStackTrace(obj, |
| cons_opt ? cons_opt : captureStackTrace, |
| stackTraceLimit); |
| // Note that 'obj' and 'this' maybe different when called on objects that |
| // have the error object on its prototype chain. The getter replaces itself |
| // with a data property as soon as the stack trace has been formatted. |
| var getter = function() { |
| var value = FormatRawStackTrace(obj, raw_stack); |
| %DefineOrRedefineDataProperty(obj, 'stack', value, NONE); |
| return value; |
| }; |
| // The 'stack' property of the receiver is set as data property. If |
| // the receiver is the same as holder, this accessor pair is replaced. |
| var setter = function(v) { |
| %DefineOrRedefineDataProperty(this, 'stack', v, NONE); |
| }; |
| |
| %DefineOrRedefineAccessorProperty(obj, 'stack', getter, setter, DONT_ENUM); |
| } |
| |
| |
| function SetUpError() { |
| // Define special error type constructors. |
| |
| var DefineError = function(f) { |
| // Store the error function in both the global object |
| // and the runtime object. The function is fetched |
| // from the runtime object when throwing errors from |
| // within the runtime system to avoid strange side |
| // effects when overwriting the error functions from |
| // user code. |
| var name = f.name; |
| %SetProperty(global, name, f, DONT_ENUM); |
| %SetProperty(builtins, '$' + name, f, DONT_ENUM | DONT_DELETE | READ_ONLY); |
| // Configure the error function. |
| if (name == 'Error') { |
| // The prototype of the Error object must itself be an error. |
| // However, it can't be an instance of the Error object because |
| // it hasn't been properly configured yet. Instead we create a |
| // special not-a-true-error-but-close-enough object. |
| var ErrorPrototype = function() {}; |
| %FunctionSetPrototype(ErrorPrototype, $Object.prototype); |
| %FunctionSetInstanceClassName(ErrorPrototype, 'Error'); |
| %FunctionSetPrototype(f, new ErrorPrototype()); |
| } else { |
| %FunctionSetPrototype(f, new $Error()); |
| } |
| %FunctionSetInstanceClassName(f, 'Error'); |
| %SetProperty(f.prototype, 'constructor', f, DONT_ENUM); |
| %SetProperty(f.prototype, "name", name, DONT_ENUM); |
| %SetCode(f, function(m) { |
| if (%_IsConstructCall()) { |
| // Define all the expected properties directly on the error |
| // object. This avoids going through getters and setters defined |
| // on prototype objects. |
| %IgnoreAttributesAndSetProperty(this, 'stack', void 0, DONT_ENUM); |
| if (!IS_UNDEFINED(m)) { |
| %IgnoreAttributesAndSetProperty( |
| this, 'message', ToString(m), DONT_ENUM); |
| } |
| captureStackTrace(this, f); |
| } else { |
| return new f(m); |
| } |
| }); |
| %SetNativeFlag(f); |
| }; |
| |
| DefineError(function Error() { }); |
| DefineError(function TypeError() { }); |
| DefineError(function RangeError() { }); |
| DefineError(function SyntaxError() { }); |
| DefineError(function ReferenceError() { }); |
| DefineError(function EvalError() { }); |
| DefineError(function URIError() { }); |
| } |
| |
| SetUpError(); |
| |
| $Error.captureStackTrace = captureStackTrace; |
| |
| %SetProperty($Error.prototype, 'message', '', DONT_ENUM); |
| |
| // Global list of error objects visited during ErrorToString. This is |
| // used to detect cycles in error toString formatting. |
| var visited_errors = new InternalArray(); |
| var cyclic_error_marker = new $Object(); |
| |
| function GetPropertyWithoutInvokingMonkeyGetters(error, name) { |
| // Climb the prototype chain until we find the holder. |
| while (error && !%HasLocalProperty(error, name)) { |
| error = error.__proto__; |
| } |
| if (error === null) return void 0; |
| if (!IS_OBJECT(error)) return error[name]; |
| // If the property is an accessor on one of the predefined errors that can be |
| // generated statically by the compiler, don't touch it. This is to address |
| // http://code.google.com/p/chromium/issues/detail?id=69187 |
| var desc = %GetOwnProperty(error, name); |
| if (desc && desc[IS_ACCESSOR_INDEX]) { |
| var isName = name === "name"; |
| if (error === $ReferenceError.prototype) |
| return isName ? "ReferenceError" : void 0; |
| if (error === $SyntaxError.prototype) |
| return isName ? "SyntaxError" : void 0; |
| if (error === $TypeError.prototype) |
| return isName ? "TypeError" : void 0; |
| } |
| // Otherwise, read normally. |
| return error[name]; |
| } |
| |
| function ErrorToStringDetectCycle(error) { |
| if (!%PushIfAbsent(visited_errors, error)) throw cyclic_error_marker; |
| try { |
| var name = GetPropertyWithoutInvokingMonkeyGetters(error, "name"); |
| name = IS_UNDEFINED(name) ? "Error" : TO_STRING_INLINE(name); |
| var message = GetPropertyWithoutInvokingMonkeyGetters(error, "message"); |
| message = IS_UNDEFINED(message) ? "" : TO_STRING_INLINE(message); |
| if (name === "") return message; |
| if (message === "") return name; |
| return name + ": " + message; |
| } finally { |
| visited_errors.length = visited_errors.length - 1; |
| } |
| } |
| |
| function ErrorToString() { |
| if (!IS_SPEC_OBJECT(this)) { |
| throw MakeTypeError("called_on_non_object", ["Error.prototype.toString"]); |
| } |
| |
| try { |
| return ErrorToStringDetectCycle(this); |
| } catch(e) { |
| // If this error message was encountered already return the empty |
| // string for it instead of recursively formatting it. |
| if (e === cyclic_error_marker) { |
| return ''; |
| } |
| throw e; |
| } |
| } |
| |
| |
| InstallFunctions($Error.prototype, DONT_ENUM, ['toString', ErrorToString]); |
| |
| // Boilerplate for exceptions for stack overflows. Used from |
| // Isolate::StackOverflow(). |
| function SetUpStackOverflowBoilerplate() { |
| var boilerplate = MakeRangeError('stack_overflow', []); |
| |
| // The raw stack trace is stored as hidden property of the copy of this |
| // boilerplate error object. Note that the receiver 'this' may not be that |
| // error object copy, but can be found on the prototype chain of 'this'. |
| // When the stack trace is formatted, this accessor property is replaced by |
| // a data property. |
| function getter() { |
| var holder = this; |
| while (!IS_ERROR(holder)) { |
| holder = %GetPrototype(holder); |
| if (holder == null) return MakeSyntaxError('illegal_access', []); |
| } |
| var raw_stack = %GetOverflowedRawStackTrace(holder); |
| var result = IS_ARRAY(raw_stack) ? FormatRawStackTrace(holder, raw_stack) |
| : void 0; |
| %DefineOrRedefineDataProperty(holder, 'stack', result, NONE); |
| return result; |
| } |
| |
| // The 'stack' property of the receiver is set as data property. If |
| // the receiver is the same as holder, this accessor pair is replaced. |
| function setter(v) { |
| %DefineOrRedefineDataProperty(this, 'stack', v, NONE); |
| } |
| |
| %DefineOrRedefineAccessorProperty( |
| boilerplate, 'stack', getter, setter, DONT_ENUM); |
| |
| return boilerplate; |
| } |
| |
| var kStackOverflowBoilerplate = SetUpStackOverflowBoilerplate(); |