| // RUN: %clang_cc1 -Wunused-variable -analyze -analyzer-experimental-internal-checks -analyzer-check-objc-mem -analyzer-check-dead-stores -fblocks -verify -Wno-unreachable-code -analyzer-opt-analyze-nested-blocks %s |
| // RUN: %clang_cc1 -Wunused-variable -analyze -analyzer-experimental-internal-checks -analyzer-check-objc-mem -analyzer-store=basic -analyzer-constraints=basic -analyzer-check-dead-stores -fblocks -verify -Wno-unreachable-code -analyzer-opt-analyze-nested-blocks %s |
| // RUN: %clang_cc1 -Wunused-variable -analyze -analyzer-experimental-internal-checks -analyzer-check-objc-mem -analyzer-store=basic -analyzer-constraints=range -analyzer-check-dead-stores -fblocks -verify -Wno-unreachable-code -analyzer-opt-analyze-nested-blocks %s |
| // RUN: %clang_cc1 -Wunused-variable -analyze -analyzer-experimental-internal-checks -analyzer-check-objc-mem -analyzer-store=region -analyzer-constraints=basic -analyzer-check-dead-stores -fblocks -verify -Wno-unreachable-code -analyzer-opt-analyze-nested-blocks %s |
| // RUN: %clang_cc1 -Wunused-variable -analyze -analyzer-experimental-internal-checks -analyzer-check-objc-mem -analyzer-store=region -analyzer-constraints=range -analyzer-check-dead-stores -fblocks -verify -Wno-unreachable-code -analyzer-opt-analyze-nested-blocks %s |
| |
| void f1() { |
| int k, y; // expected-warning{{unused variable 'k'}} expected-warning{{unused variable 'y'}} |
| int abc=1; |
| long idx=abc+3*5; // expected-warning {{never read}} expected-warning{{unused variable 'idx'}} |
| } |
| |
| void f2(void *b) { |
| char *c = (char*)b; // no-warning |
| char *d = b+1; // expected-warning {{never read}} expected-warning{{unused variable 'd'}} |
| printf("%s", c); // expected-warning{{implicitly declaring C library function 'printf' with type 'int (char const *, ...)'}} \ |
| // expected-note{{please include the header <stdio.h> or explicitly provide a declaration for 'printf'}} |
| } |
| |
| int f(); |
| |
| void f3() { |
| int r; |
| if ((r = f()) != 0) { // no-warning |
| int y = r; // no-warning |
| printf("the error is: %d\n", y); |
| } |
| } |
| |
| void f4(int k) { |
| |
| k = 1; |
| |
| if (k) |
| f1(); |
| |
| k = 2; // expected-warning {{never read}} |
| } |
| |
| void f5() { |
| |
| int x = 4; // no-warning |
| int *p = &x; // expected-warning{{never read}} expected-warning{{unused variable 'p'}} |
| |
| } |
| |
| int f6() { |
| |
| int x = 4; |
| ++x; // expected-warning{{never read}} |
| return 1; |
| } |
| |
| int f7(int *p) { |
| // This is allowed for defensive programming. |
| p = 0; // no-warning |
| return 1; |
| } |
| |
| int f7b(int *p) { |
| // This is allowed for defensive programming. |
| p = (0); // no-warning |
| return 1; |
| } |
| |
| int f7c(int *p) { |
| // This is allowed for defensive programming. |
| p = (void*) 0; // no-warning |
| return 1; |
| } |
| |
| int f7d(int *p) { |
| // This is allowed for defensive programming. |
| p = (void*) (0); // no-warning |
| return 1; |
| } |
| |
| int f8(int *p) { |
| extern int *baz(); |
| if ((p = baz())) // expected-warning{{Although the value}} |
| return 1; |
| return 0; |
| } |
| |
| int f9() { |
| int x = 4; |
| x = x + 10; // expected-warning{{never read}} |
| return 1; |
| } |
| |
| int f10() { |
| int x = 4; |
| x = 10 + x; // expected-warning{{never read}} |
| return 1; |
| } |
| |
| int f11() { |
| int x = 4; |
| return x++; // expected-warning{{never read}} |
| } |
| |
| int f11b() { |
| int x = 4; |
| return ((((++x)))); // no-warning |
| } |
| |
| int f12a(int y) { |
| int x = y; // expected-warning{{unused variable 'x'}} |
| return 1; |
| } |
| int f12b(int y) { |
| int x __attribute__((unused)) = y; // no-warning |
| return 1; |
| } |
| int f12c(int y) { |
| // Allow initialiation of scalar variables by parameters as a form of |
| // defensive programming. |
| int x = y; // no-warning |
| x = 1; |
| return x; |
| } |
| |
| // Filed with PR 2630. This code should produce no warnings. |
| int f13(void) |
| { |
| int a = 1; |
| int b, c = b = a + a; |
| |
| if (b > 0) |
| return (0); |
| |
| return (a + b + c); |
| } |
| |
| // Filed with PR 2763. |
| int f14(int count) { |
| int index, nextLineIndex; |
| for (index = 0; index < count; index = nextLineIndex+1) { |
| nextLineIndex = index+1; // no-warning |
| continue; |
| } |
| return index; |
| } |
| |
| // Test case for <rdar://problem/6248086> |
| void f15(unsigned x, unsigned y) { |
| int count = x * y; // no-warning |
| int z[count]; // expected-warning{{unused variable 'z'}} |
| } |
| |
| int f16(int x) { |
| x = x * 2; |
| x = sizeof(int [x = (x || x + 1) * 2]) // expected-warning{{Although the value stored to 'x' is used}} |
| ? 5 : 8; |
| return x; |
| } |
| |
| // Self-assignments should not be flagged as dead stores. |
| void f17() { |
| int x = 1; |
| x = x; // expected-warning{{Assigned value is always the same as the existing value}} |
| } |
| |
| // <rdar://problem/6506065> |
| // The values of dead stores are only "consumed" in an enclosing expression |
| // what that value is actually used. In other words, don't say "Although the |
| // value stored to 'x' is used...". |
| int f18() { |
| int x = 0; // no-warning |
| if (1) |
| x = 10; // expected-warning{{Value stored to 'x' is never read}} |
| while (1) |
| x = 10; // expected-warning{{Value stored to 'x' is never read}} |
| do |
| x = 10; // expected-warning{{Value stored to 'x' is never read}} |
| while (1); |
| |
| return (x = 10); // expected-warning{{Although the value stored to 'x' is used in the enclosing expression, the value is never actually read from 'x'}} |
| } |
| |
| // PR 3514: false positive `dead initialization` warning for init to global |
| // http://llvm.org/bugs/show_bug.cgi?id=3514 |
| extern const int MyConstant; |
| int f19(void) { |
| int x = MyConstant; // no-warning |
| x = 1; |
| return x; |
| } |
| |
| int f19b(void) { // This case is the same as f19. |
| const int MyConstant = 0; |
| int x = MyConstant; // no-warning |
| x = 1; |
| return x; |
| } |
| |
| void f20(void) { |
| int x = 1; // no-warning |
| #pragma unused(x) |
| } |
| |
| void halt() __attribute__((noreturn)); |
| int f21() { |
| int x = 4; |
| |
| ++x; // expected-warning{{never read}} |
| if (1) { |
| halt(); |
| (void)x; |
| } |
| return 1; |
| } |
| |
| int j; |
| void f22() { |
| int x = 4; |
| int y1 = 4; |
| int y2 = 4; |
| int y3 = 4; |
| int y4 = 4; |
| int y5 = 4; |
| int y6 = 4; |
| int y7 = 4; |
| int y8 = 4; |
| int y9 = 4; |
| int y10 = 4; |
| int y11 = 4; |
| int y12 = 4; |
| int y13 = 4; |
| int y14 = 4; |
| int y15 = 4; |
| int y16 = 4; |
| int y17 = 4; |
| int y18 = 4; |
| int y19 = 4; |
| int y20 = 4; |
| |
| ++x; // expected-warning{{never read}} |
| ++y1; |
| ++y2; |
| ++y3; |
| ++y4; |
| ++y5; |
| ++y6; |
| ++y7; |
| ++y8; |
| ++y9; |
| ++y10; |
| ++y11; |
| ++y12; |
| ++y13; |
| ++y14; |
| ++y15; |
| ++y16; |
| ++y17; |
| ++y18; |
| ++y19; |
| ++y20; |
| |
| switch (j) { |
| case 1: |
| if (0) |
| (void)x; |
| if (1) { |
| (void)y1; |
| return; |
| } |
| (void)x; |
| break; |
| case 2: |
| if (0) |
| (void)x; |
| else { |
| (void)y2; |
| return; |
| } |
| (void)x; |
| break; |
| case 3: |
| if (1) { |
| (void)y3; |
| return; |
| } else |
| (void)x; |
| (void)x; |
| break; |
| case 4: |
| 0 ? : ((void)y4, ({ return; })); |
| (void)x; |
| break; |
| case 5: |
| 1 ? : (void)x; |
| 0 ? (void)x : ((void)y5, ({ return; })); |
| (void)x; |
| break; |
| case 6: |
| 1 ? ((void)y6, ({ return; })) : (void)x; |
| (void)x; |
| break; |
| case 7: |
| (void)(0 && x); |
| (void)y7; |
| (void)(0 || (y8, ({ return; }), 1)); // expected-warning {{expression result unused}} |
| (void)x; |
| break; |
| case 8: |
| (void)(1 && (y9, ({ return; }), 1)); // expected-warning {{expression result unused}} |
| (void)x; |
| break; |
| case 9: |
| (void)(1 || x); |
| (void)y10; |
| break; |
| case 10: |
| while (0) { |
| (void)x; |
| } |
| (void)y11; |
| break; |
| case 11: |
| while (1) { |
| (void)y12; |
| } |
| (void)x; |
| break; |
| case 12: |
| do { |
| (void)y13; |
| } while (0); |
| (void)y14; |
| break; |
| case 13: |
| do { |
| (void)y15; |
| } while (1); |
| (void)x; |
| break; |
| case 14: |
| for (;;) { |
| (void)y16; |
| } |
| (void)x; |
| break; |
| case 15: |
| for (;1;) { |
| (void)y17; |
| } |
| (void)x; |
| break; |
| case 16: |
| for (;0;) { |
| (void)x; |
| } |
| (void)y18; |
| break; |
| case 17: |
| __builtin_choose_expr(0, (void)x, ((void)y19, ({ return; }))); |
| (void)x; |
| break; |
| case 19: |
| __builtin_choose_expr(1, ((void)y20, ({ return; })), (void)x); |
| (void)x; |
| break; |
| } |
| } |
| |
| void f23_aux(const char* s); |
| void f23(int argc, char **argv) { |
| int shouldLog = (argc > 1); // no-warning |
| ^{ |
| if (shouldLog) f23_aux("I did too use it!\n"); |
| else f23_aux("I shouldn't log. Wait.. d'oh!\n"); |
| }(); |
| } |
| |
| void f23_pos(int argc, char **argv) { |
| int shouldLog = (argc > 1); // expected-warning{{Value stored to 'shouldLog' during its initialization is never read}} expected-warning{{unused variable 'shouldLog'}} |
| ^{ |
| f23_aux("I did too use it!\n"); |
| }(); |
| } |
| |
| void f24_A(int y) { |
| // FIXME: One day this should be reported as dead since 'z = x + y' is dead. |
| int x = (y > 2); // no-warning |
| ^ { |
| int z = x + y; // expected-warning{{Value stored to 'z' during its initialization is never read}} expected-warning{{unused variable 'z'}} |
| }(); |
| } |
| |
| void f24_B(int y) { |
| // FIXME: One day this should be reported as dead since 'x' is just overwritten. |
| __block int x = (y > 2); // no-warning |
| ^{ |
| // FIXME: This should eventually be a dead store since it is never read either. |
| x = 5; // no-warning |
| }(); |
| } |
| |
| int f24_C(int y) { |
| // FIXME: One day this should be reported as dead since 'x' is just overwritten. |
| __block int x = (y > 2); // no-warning |
| ^{ |
| x = 5; // no-warning |
| }(); |
| return x; |
| } |
| |
| int f24_D(int y) { |
| __block int x = (y > 2); // no-warning |
| ^{ |
| if (y > 4) |
| x = 5; // no-warning |
| }(); |
| return x; |
| } |
| |
| // This example shows that writing to a variable captured by a block means that it might |
| // not be dead. |
| int f25(int y) { |
| __block int x = (y > 2); |
| __block int z = 0; |
| void (^foo)() = ^{ z = x + y; }; |
| x = 4; // no-warning |
| foo(); |
| return z; |
| } |
| |
| // This test is mostly the same as 'f25', but shows that the heuristic of pruning out dead |
| // stores for variables that are just marked '__block' is overly conservative. |
| int f25_b(int y) { |
| // FIXME: we should eventually report a dead store here. |
| __block int x = (y > 2); |
| __block int z = 0; |
| x = 4; // no-warning |
| return z; |
| } |
| |
| int f26_nestedblocks() { |
| int z; |
| z = 1; |
| __block int y = 0; |
| ^{ |
| int k; |
| k = 1; // expected-warning{{Value stored to 'k' is never read}} |
| ^{ |
| y = z + 1; |
| }(); |
| }(); |
| return y; |
| } |
| |
| // The FOREACH macro in QT uses 'break' statements within statement expressions |
| // placed within the increment code of for loops. |
| void rdar8014335() { |
| for (int i = 0 ; i != 10 ; ({ break; })) { |
| for ( ; ; ({ ++i; break; })) ; |
| // Note that the next value stored to 'i' is never executed |
| // because the next statement to be executed is the 'break' |
| // in the increment code of the first loop. |
| i = i * 3; // expected-warning{{Value stored to 'i' is never read}} expected-warning{{The left operand to '*' is always 1}} |
| } |
| } |
| |