lib/Basic/SourceManager.cpp

//===--- SourceManager.cpp - Track and cache source files -----------------===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
//  This file implements the SourceManager interface.
//
//===----------------------------------------------------------------------===//

#include "clang/Basic/SourceManager.h"
#include "clang/Basic/SourceManagerInternals.h"
#include "clang/Basic/FileManager.h"
#include "llvm/Support/Compiler.h"
#include "llvm/Support/MemoryBuffer.h"
#include "llvm/System/Path.h"
#include "llvm/Support/Streams.h"
#include <algorithm>
#include <iostream>
using namespace clang;
using namespace SrcMgr;
using llvm::MemoryBuffer;

//===----------------------------------------------------------------------===//
// SourceManager Helper Classes
//===----------------------------------------------------------------------===//

ContentCache::~ContentCache() {
  delete Buffer;
}

/// getSizeBytesMapped - Returns the number of bytes actually mapped for
///  this ContentCache.  This can be 0 if the MemBuffer was not actually
///  instantiated.
unsigned ContentCache::getSizeBytesMapped() const {
  return Buffer ? Buffer->getBufferSize() : 0;
}

/// getSize - Returns the size of the content encapsulated by this ContentCache.
///  This can be the size of the source file or the size of an arbitrary
///  scratch buffer.  If the ContentCache encapsulates a source file, that
///  file is not lazily brought in from disk to satisfy this query.
unsigned ContentCache::getSize() const {
  return Entry ? Entry->getSize() : Buffer->getBufferSize();
}

const llvm::MemoryBuffer *ContentCache::getBuffer() const {  
  // Lazily create the Buffer for ContentCaches that wrap files.
  if (!Buffer && Entry) {
    // FIXME: Should we support a way to not have to do this check over
    //   and over if we cannot open the file?
    Buffer = MemoryBuffer::getFile(Entry->getName(), 0, Entry->getSize());
  }
  return Buffer;
}

unsigned LineTableInfo::getLineTableFilenameID(const char *Ptr, unsigned Len) {
  // Look up the filename in the string table, returning the pre-existing value
  // if it exists.
  llvm::StringMapEntry<unsigned> &Entry = 
    FilenameIDs.GetOrCreateValue(Ptr, Ptr+Len, ~0U);
  if (Entry.getValue() != ~0U)
    return Entry.getValue();
  
  // Otherwise, assign this the next available ID.
  Entry.setValue(FilenamesByID.size());
  FilenamesByID.push_back(&Entry);
  return FilenamesByID.size()-1;
}

/// AddLineNote - Add a line note to the line table that indicates that there
/// is a #line at the specified FID/Offset location which changes the presumed
/// location to LineNo/FilenameID.
void LineTableInfo::AddLineNote(unsigned FID, unsigned Offset,
                                unsigned LineNo, int FilenameID) {
  std::vector<LineEntry> &Entries = LineEntries[FID];
  
  assert((Entries.empty() || Entries.back().FileOffset < Offset) &&
         "Adding line entries out of order!");
  
  SrcMgr::CharacteristicKind Kind = SrcMgr::C_User;
  unsigned IncludeOffset = 0;
  
  if (!Entries.empty()) {
    // If this is a '#line 4' after '#line 42 "foo.h"', make sure to remember
    // that we are still in "foo.h".
    if (FilenameID == -1)
      FilenameID = Entries.back().FilenameID;
    
    // If we are after a line marker that switched us to system header mode, or
    // that set #include information, preserve it.
    Kind = Entries.back().FileKind;
    IncludeOffset = Entries.back().IncludeOffset;
  }
  
  Entries.push_back(LineEntry::get(Offset, LineNo, FilenameID, Kind,
                                   IncludeOffset));
}

/// AddLineNote This is the same as the previous version of AddLineNote, but is
/// used for GNU line markers.  If EntryExit is 0, then this doesn't change the
/// presumed #include stack.  If it is 1, this is a file entry, if it is 2 then
/// this is a file exit.  FileKind specifies whether this is a system header or
/// extern C system header.
void LineTableInfo::AddLineNote(unsigned FID, unsigned Offset,
                                unsigned LineNo, int FilenameID,
                                unsigned EntryExit,
                                SrcMgr::CharacteristicKind FileKind) {
  assert(FilenameID != -1 && "Unspecified filename should use other accessor");
  
  std::vector<LineEntry> &Entries = LineEntries[FID];
  
  assert((Entries.empty() || Entries.back().FileOffset < Offset) &&
         "Adding line entries out of order!");

  unsigned IncludeOffset = 0;
  if (EntryExit == 0) {  // No #include stack change.
    IncludeOffset = Entries.empty() ? 0 : Entries.back().IncludeOffset;
  } else if (EntryExit == 1) {
    IncludeOffset = Offset-1;
  } else if (EntryExit == 2) {
    assert(!Entries.empty() && Entries.back().IncludeOffset &&
       "PPDirectives should have caught case when popping empty include stack");
    
    // Get the include loc of the last entries' include loc as our include loc.
    IncludeOffset = 0;
    if (const LineEntry *PrevEntry =
          FindNearestLineEntry(FID, Entries.back().IncludeOffset))
      IncludeOffset = PrevEntry->IncludeOffset;
  }
  
  Entries.push_back(LineEntry::get(Offset, LineNo, FilenameID, FileKind,
                                   IncludeOffset));
}


/// FindNearestLineEntry - Find the line entry nearest to FID that is before
/// it.  If there is no line entry before Offset in FID, return null.
const LineEntry *LineTableInfo::FindNearestLineEntry(unsigned FID, 
                                                     unsigned Offset) {
  const std::vector<LineEntry> &Entries = LineEntries[FID];
  assert(!Entries.empty() && "No #line entries for this FID after all!");

  // It is very common for the query to be after the last #line, check this
  // first.
  if (Entries.back().FileOffset <= Offset)
    return &Entries.back();

  // Do a binary search to find the maximal element that is still before Offset.
  std::vector<LineEntry>::const_iterator I =
    std::upper_bound(Entries.begin(), Entries.end(), Offset);
  if (I == Entries.begin()) return 0;
  return &*--I;
}

/// \brief Add a new line entry that has already been encoded into
/// the internal representation of the line table.
void LineTableInfo::AddEntry(unsigned FID, 
                             const std::vector<LineEntry> &Entries) {
  LineEntries[FID] = Entries;
}

/// getLineTableFilenameID - Return the uniqued ID for the specified filename.
/// 
unsigned SourceManager::getLineTableFilenameID(const char *Ptr, unsigned Len) {
  if (LineTable == 0)
    LineTable = new LineTableInfo();
  return LineTable->getLineTableFilenameID(Ptr, Len);
}


/// AddLineNote - Add a line note to the line table for the FileID and offset
/// specified by Loc.  If FilenameID is -1, it is considered to be
/// unspecified.
void SourceManager::AddLineNote(SourceLocation Loc, unsigned LineNo,
                                int FilenameID) {
  std::pair<FileID, unsigned> LocInfo = getDecomposedInstantiationLoc(Loc);
  
  const SrcMgr::FileInfo &FileInfo = getSLocEntry(LocInfo.first).getFile();

  // Remember that this file has #line directives now if it doesn't already.
  const_cast<SrcMgr::FileInfo&>(FileInfo).setHasLineDirectives();
  
  if (LineTable == 0)
    LineTable = new LineTableInfo();
  LineTable->AddLineNote(LocInfo.first.ID, LocInfo.second, LineNo, FilenameID);
}

/// AddLineNote - Add a GNU line marker to the line table.
void SourceManager::AddLineNote(SourceLocation Loc, unsigned LineNo,
                                int FilenameID, bool IsFileEntry,
                                bool IsFileExit, bool IsSystemHeader,
                                bool IsExternCHeader) {
  // If there is no filename and no flags, this is treated just like a #line,
  // which does not change the flags of the previous line marker.
  if (FilenameID == -1) {
    assert(!IsFileEntry && !IsFileExit && !IsSystemHeader && !IsExternCHeader &&
           "Can't set flags without setting the filename!");
    return AddLineNote(Loc, LineNo, FilenameID);
  }
  
  std::pair<FileID, unsigned> LocInfo = getDecomposedInstantiationLoc(Loc);
  const SrcMgr::FileInfo &FileInfo = getSLocEntry(LocInfo.first).getFile();
  
  // Remember that this file has #line directives now if it doesn't already.
  const_cast<SrcMgr::FileInfo&>(FileInfo).setHasLineDirectives();
  
  if (LineTable == 0)
    LineTable = new LineTableInfo();
  
  SrcMgr::CharacteristicKind FileKind;
  if (IsExternCHeader)
    FileKind = SrcMgr::C_ExternCSystem;
  else if (IsSystemHeader)
    FileKind = SrcMgr::C_System;
  else
    FileKind = SrcMgr::C_User;
  
  unsigned EntryExit = 0;
  if (IsFileEntry)
    EntryExit = 1;
  else if (IsFileExit)
    EntryExit = 2;
  
  LineTable->AddLineNote(LocInfo.first.ID, LocInfo.second, LineNo, FilenameID,
                         EntryExit, FileKind);
}

LineTableInfo &SourceManager::getLineTable() {
  if (LineTable == 0)
    LineTable = new LineTableInfo();
  return *LineTable;
}

//===----------------------------------------------------------------------===//
// Private 'Create' methods.
//===----------------------------------------------------------------------===//

SourceManager::~SourceManager() {
  delete LineTable;
  
  // Delete FileEntry objects corresponding to content caches.  Since the actual
  // content cache objects are bump pointer allocated, we just have to run the
  // dtors, but we call the deallocate method for completeness.
  for (unsigned i = 0, e = MemBufferInfos.size(); i != e; ++i) {
    MemBufferInfos[i]->~ContentCache();
    ContentCacheAlloc.Deallocate(MemBufferInfos[i]);
  }
  for (llvm::DenseMap<const FileEntry*, SrcMgr::ContentCache*>::iterator
       I = FileInfos.begin(), E = FileInfos.end(); I != E; ++I) {
    I->second->~ContentCache();
    ContentCacheAlloc.Deallocate(I->second);
  }
}

void SourceManager::clearIDTables() {
  MainFileID = FileID();
  SLocEntryTable.clear();
  LastLineNoFileIDQuery = FileID();
  LastLineNoContentCache = 0;
  LastFileIDLookup = FileID();
  
  if (LineTable)
    LineTable->clear();
  
  // Use up FileID #0 as an invalid instantiation.
  NextOffset = 0;
  createInstantiationLoc(SourceLocation(),SourceLocation(),SourceLocation(), 1);
}

/// getOrCreateContentCache - Create or return a cached ContentCache for the
/// specified file.
const ContentCache *
SourceManager::getOrCreateContentCache(const FileEntry *FileEnt) {
  assert(FileEnt && "Didn't specify a file entry to use?");
  
  // Do we already have information about this file?
  ContentCache *&Entry = FileInfos[FileEnt];
  if (Entry) return Entry;
  
  // Nope, create a new Cache entry.  Make sure it is at least 8-byte aligned
  // so that FileInfo can use the low 3 bits of the pointer for its own
  // nefarious purposes.
  unsigned EntryAlign = llvm::AlignOf<ContentCache>::Alignment;
  EntryAlign = std::max(8U, EntryAlign);
  Entry = ContentCacheAlloc.Allocate<ContentCache>(1, EntryAlign);
  new (Entry) ContentCache(FileEnt);
  return Entry;
}


/// createMemBufferContentCache - Create a new ContentCache for the specified
///  memory buffer.  This does no caching.
const ContentCache*
SourceManager::createMemBufferContentCache(const MemoryBuffer *Buffer) {
  // Add a new ContentCache to the MemBufferInfos list and return it.  Make sure
  // it is at least 8-byte aligned so that FileInfo can use the low 3 bits of
  // the pointer for its own nefarious purposes.
  unsigned EntryAlign = llvm::AlignOf<ContentCache>::Alignment;
  EntryAlign = std::max(8U, EntryAlign);
  ContentCache *Entry = ContentCacheAlloc.Allocate<ContentCache>(1, EntryAlign);
  new (Entry) ContentCache();
  MemBufferInfos.push_back(Entry);
  Entry->setBuffer(Buffer);
  return Entry;
}

void SourceManager::PreallocateSLocEntries(ExternalSLocEntrySource *Source,
                                           unsigned NumSLocEntries,
                                           unsigned NextOffset) {
  ExternalSLocEntries = Source;
  this->NextOffset = NextOffset;
  SLocEntryLoaded.resize(NumSLocEntries + 1);
  SLocEntryLoaded[0] = true;
  SLocEntryTable.resize(SLocEntryTable.size() + NumSLocEntries);
}

void SourceManager::ClearPreallocatedSLocEntries() {
  unsigned I = 0;
  for (unsigned N = SLocEntryLoaded.size(); I != N; ++I)
    if (!SLocEntryLoaded[I])
      break;

  // We've already loaded all preallocated source location entries.
  if (I == SLocEntryLoaded.size())
    return;

  // Remove everything from location I onward.
  SLocEntryTable.resize(I);
  SLocEntryLoaded.clear();
  ExternalSLocEntries = 0;
}


//===----------------------------------------------------------------------===//
// Methods to create new FileID's and instantiations.
//===----------------------------------------------------------------------===//

/// createFileID - Create a new fileID for the specified ContentCache and
/// include position.  This works regardless of whether the ContentCache
/// corresponds to a file or some other input source.
FileID SourceManager::createFileID(const ContentCache *File,
                                   SourceLocation IncludePos,
                                   SrcMgr::CharacteristicKind FileCharacter,
                                   unsigned PreallocatedID,
                                   unsigned Offset) {
  SLocEntry NewEntry = SLocEntry::get(NextOffset, 
                                      FileInfo::get(IncludePos, File,
                                                    FileCharacter));
  if (PreallocatedID) {
    // If we're filling in a preallocated ID, just load in the file
    // entry and return.
    assert(PreallocatedID < SLocEntryLoaded.size() && 
           "Preallocate ID out-of-range");
    assert(!SLocEntryLoaded[PreallocatedID] && 
           "Source location entry already loaded");
    assert(Offset && "Preallocate source location cannot have zero offset");
    SLocEntryTable[PreallocatedID] 
      = SLocEntry::get(Offset, FileInfo::get(IncludePos, File, FileCharacter));
    SLocEntryLoaded[PreallocatedID] = true;
    return LastFileIDLookup = FileID::get(PreallocatedID);
  }

  SLocEntryTable.push_back(SLocEntry::get(NextOffset, 
                                          FileInfo::get(IncludePos, File,
                                                        FileCharacter)));
  unsigned FileSize = File->getSize();
  assert(NextOffset+FileSize+1 > NextOffset && "Ran out of source locations!");
  NextOffset += FileSize+1;
  
  // Set LastFileIDLookup to the newly created file.  The next getFileID call is
  // almost guaranteed to be from that file.
  return LastFileIDLookup = FileID::get(SLocEntryTable.size()-1);
}

/// createInstantiationLoc - Return a new SourceLocation that encodes the fact
/// that a token from SpellingLoc should actually be referenced from
/// InstantiationLoc.
SourceLocation SourceManager::createInstantiationLoc(SourceLocation SpellingLoc,
                                                     SourceLocation ILocStart,
                                                     SourceLocation ILocEnd,
                                                     unsigned TokLength,
                                                     unsigned PreallocatedID,
                                                     unsigned Offset) {
  InstantiationInfo II = InstantiationInfo::get(ILocStart,ILocEnd, SpellingLoc);
  if (PreallocatedID) {
    // If we're filling in a preallocated ID, just load in the
    // instantiation entry and return.
    assert(PreallocatedID < SLocEntryLoaded.size() && 
           "Preallocate ID out-of-range");
    assert(!SLocEntryLoaded[PreallocatedID] && 
           "Source location entry already loaded");
    assert(Offset && "Preallocate source location cannot have zero offset");
    SLocEntryTable[PreallocatedID] = SLocEntry::get(Offset, II);
    SLocEntryLoaded[PreallocatedID] = true;
    return SourceLocation::getMacroLoc(Offset);
  }
  SLocEntryTable.push_back(SLocEntry::get(NextOffset, II));
  assert(NextOffset+TokLength+1 > NextOffset && "Ran out of source locations!");
  NextOffset += TokLength+1;
  return SourceLocation::getMacroLoc(NextOffset-(TokLength+1));
}

/// getBufferData - Return a pointer to the start and end of the source buffer
/// data for the specified FileID.
std::pair<const char*, const char*>
SourceManager::getBufferData(FileID FID) const {
  const llvm::MemoryBuffer *Buf = getBuffer(FID);
  return std::make_pair(Buf->getBufferStart(), Buf->getBufferEnd());
}


//===----------------------------------------------------------------------===//
// SourceLocation manipulation methods.
//===----------------------------------------------------------------------===//

/// getFileIDSlow - Return the FileID for a SourceLocation.  This is a very hot
/// method that is used for all SourceManager queries that start with a
/// SourceLocation object.  It is responsible for finding the entry in
/// SLocEntryTable which contains the specified location.
///
FileID SourceManager::getFileIDSlow(unsigned SLocOffset) const {
  assert(SLocOffset && "Invalid FileID");
  
  // After the first and second level caches, I see two common sorts of
  // behavior: 1) a lot of searched FileID's are "near" the cached file location
  // or are "near" the cached instantiation location.  2) others are just
  // completely random and may be a very long way away.
  //
  // To handle this, we do a linear search for up to 8 steps to catch #1 quickly
  // then we fall back to a less cache efficient, but more scalable, binary
  // search to find the location.
  
  // See if this is near the file point - worst case we start scanning from the
  // most newly created FileID.
  std::vector<SrcMgr::SLocEntry>::const_iterator I;
  
  if (SLocEntryTable[LastFileIDLookup.ID].getOffset() < SLocOffset) {
    // Neither loc prunes our search.
    I = SLocEntryTable.end();
  } else {
    // Perhaps it is near the file point.
    I = SLocEntryTable.begin()+LastFileIDLookup.ID;
  }

  // Find the FileID that contains this.  "I" is an iterator that points to a
  // FileID whose offset is known to be larger than SLocOffset.
  unsigned NumProbes = 0;
  while (1) {
    --I;
    if (ExternalSLocEntries)
      getSLocEntry(FileID::get(I - SLocEntryTable.begin()));
    if (I->getOffset() <= SLocOffset) {
#if 0
      printf("lin %d -> %d [%s] %d %d\n", SLocOffset,
             I-SLocEntryTable.begin(),
             I->isInstantiation() ? "inst" : "file",
             LastFileIDLookup.ID,  int(SLocEntryTable.end()-I));
#endif
      FileID Res = FileID::get(I-SLocEntryTable.begin());

      // If this isn't an instantiation, remember it.  We have good locality
      // across FileID lookups.
      if (!I->isInstantiation())
        LastFileIDLookup = Res;
      NumLinearScans += NumProbes+1;
      return Res;
    }
    if (++NumProbes == 8)
      break;
  }
  
  // Convert "I" back into an index.  We know that it is an entry whose index is
  // larger than the offset we are looking for.
  unsigned GreaterIndex = I-SLocEntryTable.begin();
  // LessIndex - This is the lower bound of the range that we're searching.
  // We know that the offset corresponding to the FileID is is less than
  // SLocOffset.
  unsigned LessIndex = 0;
  NumProbes = 0;
  while (1) {
    unsigned MiddleIndex = (GreaterIndex-LessIndex)/2+LessIndex;
    unsigned MidOffset = getSLocEntry(FileID::get(MiddleIndex)).getOffset();
    
    ++NumProbes;
    
    // If the offset of the midpoint is too large, chop the high side of the
    // range to the midpoint.
    if (MidOffset > SLocOffset) {
      GreaterIndex = MiddleIndex;
      continue;
    }
    
    // If the middle index contains the value, succeed and return.
    if (isOffsetInFileID(FileID::get(MiddleIndex), SLocOffset)) {
#if 0
      printf("bin %d -> %d [%s] %d %d\n", SLocOffset,
             I-SLocEntryTable.begin(),
             I->isInstantiation() ? "inst" : "file",
             LastFileIDLookup.ID, int(SLocEntryTable.end()-I));
#endif
      FileID Res = FileID::get(MiddleIndex);

      // If this isn't an instantiation, remember it.  We have good locality
      // across FileID lookups.
      if (!I->isInstantiation())
        LastFileIDLookup = Res;
      NumBinaryProbes += NumProbes;
      return Res;
    }
    
    // Otherwise, move the low-side up to the middle index.
    LessIndex = MiddleIndex;
  }
}

SourceLocation SourceManager::
getInstantiationLocSlowCase(SourceLocation Loc) const {
  do {
    std::pair<FileID, unsigned> LocInfo = getDecomposedLoc(Loc);
    Loc = getSLocEntry(LocInfo.first).getInstantiation()
                   .getInstantiationLocStart();
    Loc = Loc.getFileLocWithOffset(LocInfo.second);
  } while (!Loc.isFileID());

  return Loc;
}

SourceLocation SourceManager::getSpellingLocSlowCase(SourceLocation Loc) const {
  do {
    std::pair<FileID, unsigned> LocInfo = getDecomposedLoc(Loc);
    Loc = getSLocEntry(LocInfo.first).getInstantiation().getSpellingLoc();
    Loc = Loc.getFileLocWithOffset(LocInfo.second);
  } while (!Loc.isFileID());
  return Loc;
}


std::pair<FileID, unsigned>
SourceManager::getDecomposedInstantiationLocSlowCase(const SrcMgr::SLocEntry *E,
                                                     unsigned Offset) const {
  // If this is an instantiation record, walk through all the instantiation
  // points.
  FileID FID;
  SourceLocation Loc;
  do {
    Loc = E->getInstantiation().getInstantiationLocStart();
    
    FID = getFileID(Loc);
    E = &getSLocEntry(FID);
    Offset += Loc.getOffset()-E->getOffset();
  } while (!Loc.isFileID());
  
  return std::make_pair(FID, Offset);
}

std::pair<FileID, unsigned>
SourceManager::getDecomposedSpellingLocSlowCase(const SrcMgr::SLocEntry *E,
                                                unsigned Offset) const {
  // If this is an instantiation record, walk through all the instantiation
  // points.
  FileID FID;
  SourceLocation Loc;
  do {
    Loc = E->getInstantiation().getSpellingLoc();
    
    FID = getFileID(Loc);
    E = &getSLocEntry(FID);
    Offset += Loc.getOffset()-E->getOffset();
  } while (!Loc.isFileID());
  
  return std::make_pair(FID, Offset);
}

/// getImmediateSpellingLoc - Given a SourceLocation object, return the
/// spelling location referenced by the ID.  This is the first level down
/// towards the place where the characters that make up the lexed token can be
/// found.  This should not generally be used by clients.
SourceLocation SourceManager::getImmediateSpellingLoc(SourceLocation Loc) const{
  if (Loc.isFileID()) return Loc;
  std::pair<FileID, unsigned> LocInfo = getDecomposedLoc(Loc);
  Loc = getSLocEntry(LocInfo.first).getInstantiation().getSpellingLoc();
  return Loc.getFileLocWithOffset(LocInfo.second);
}


/// getImmediateInstantiationRange - Loc is required to be an instantiation
/// location.  Return the start/end of the instantiation information.
std::pair<SourceLocation,SourceLocation>
SourceManager::getImmediateInstantiationRange(SourceLocation Loc) const {
  assert(Loc.isMacroID() && "Not an instantiation loc!");
  const InstantiationInfo &II = getSLocEntry(getFileID(Loc)).getInstantiation();
  return II.getInstantiationLocRange();
}

/// getInstantiationRange - Given a SourceLocation object, return the
/// range of tokens covered by the instantiation in the ultimate file.
std::pair<SourceLocation,SourceLocation>
SourceManager::getInstantiationRange(SourceLocation Loc) const {
  if (Loc.isFileID()) return std::make_pair(Loc, Loc);
  
  std::pair<SourceLocation,SourceLocation> Res =
    getImmediateInstantiationRange(Loc);
  
  // Fully resolve the start and end locations to their ultimate instantiation
  // points.
  while (!Res.first.isFileID())
    Res.first = getImmediateInstantiationRange(Res.first).first;
  while (!Res.second.isFileID())
    Res.second = getImmediateInstantiationRange(Res.second).second;
  return Res;
}



//===----------------------------------------------------------------------===//
// Queries about the code at a SourceLocation.
//===----------------------------------------------------------------------===//

/// getCharacterData - Return a pointer to the start of the specified location
/// in the appropriate MemoryBuffer.
const char *SourceManager::getCharacterData(SourceLocation SL) const {
  // Note that this is a hot function in the getSpelling() path, which is
  // heavily used by -E mode.
  std::pair<FileID, unsigned> LocInfo = getDecomposedSpellingLoc(SL);
  
  // Note that calling 'getBuffer()' may lazily page in a source file.
  return getSLocEntry(LocInfo.first).getFile().getContentCache()
              ->getBuffer()->getBufferStart() + LocInfo.second;
}


/// getColumnNumber - Return the column # for the specified file position.
/// this is significantly cheaper to compute than the line number.
unsigned SourceManager::getColumnNumber(FileID FID, unsigned FilePos) const {
  const char *Buf = getBuffer(FID)->getBufferStart();
  
  unsigned LineStart = FilePos;
  while (LineStart && Buf[LineStart-1] != '\n' && Buf[LineStart-1] != '\r')
    --LineStart;
  return FilePos-LineStart+1;
}

unsigned SourceManager::getSpellingColumnNumber(SourceLocation Loc) const {
  if (Loc.isInvalid()) return 0;
  std::pair<FileID, unsigned> LocInfo = getDecomposedSpellingLoc(Loc);
  return getColumnNumber(LocInfo.first, LocInfo.second);
}

unsigned SourceManager::getInstantiationColumnNumber(SourceLocation Loc) const {
  if (Loc.isInvalid()) return 0;
  std::pair<FileID, unsigned> LocInfo = getDecomposedInstantiationLoc(Loc);
  return getColumnNumber(LocInfo.first, LocInfo.second);
}



static void ComputeLineNumbers(ContentCache* FI,
                               llvm::BumpPtrAllocator &Alloc) DISABLE_INLINE;
static void ComputeLineNumbers(ContentCache* FI, llvm::BumpPtrAllocator &Alloc){ 
  // Note that calling 'getBuffer()' may lazily page in the file.
  const MemoryBuffer *Buffer = FI->getBuffer();
  
  // Find the file offsets of all of the *physical* source lines.  This does
  // not look at trigraphs, escaped newlines, or anything else tricky.
  std::vector<unsigned> LineOffsets;
  
  // Line #1 starts at char 0.
  LineOffsets.push_back(0);
  
  const unsigned char *Buf = (const unsigned char *)Buffer->getBufferStart();
  const unsigned char *End = (const unsigned char *)Buffer->getBufferEnd();
  unsigned Offs = 0;
  while (1) {
    // Skip over the contents of the line.
    // TODO: Vectorize this?  This is very performance sensitive for programs
    // with lots of diagnostics and in -E mode.
    const unsigned char *NextBuf = (const unsigned char *)Buf;
    while (*NextBuf != '\n' && *NextBuf != '\r' && *NextBuf != '\0')
      ++NextBuf;
    Offs += NextBuf-Buf;
    Buf = NextBuf;
    
    if (Buf[0] == '\n' || Buf[0] == '\r') {
      // If this is \n\r or \r\n, skip both characters.
      if ((Buf[1] == '\n' || Buf[1] == '\r') && Buf[0] != Buf[1])
        ++Offs, ++Buf;
      ++Offs, ++Buf;
      LineOffsets.push_back(Offs);
    } else {
      // Otherwise, this is a null.  If end of file, exit.
      if (Buf == End) break;
      // Otherwise, skip the null.
      ++Offs, ++Buf;
    }
  }
  
  // Copy the offsets into the FileInfo structure.
  FI->NumLines = LineOffsets.size();
  FI->SourceLineCache = Alloc.Allocate<unsigned>(LineOffsets.size());
  std::copy(LineOffsets.begin(), LineOffsets.end(), FI->SourceLineCache);
}

/// getLineNumber - Given a SourceLocation, return the spelling line number
/// for the position indicated.  This requires building and caching a table of
/// line offsets for the MemoryBuffer, so this is not cheap: use only when
/// about to emit a diagnostic.
unsigned SourceManager::getLineNumber(FileID FID, unsigned FilePos) const {
  ContentCache *Content;
  if (LastLineNoFileIDQuery == FID)
    Content = LastLineNoContentCache;
  else
    Content = const_cast<ContentCache*>(getSLocEntry(FID)
                                        .getFile().getContentCache());
  
  // If this is the first use of line information for this buffer, compute the
  /// SourceLineCache for it on demand.
  if (Content->SourceLineCache == 0)
    ComputeLineNumbers(Content, ContentCacheAlloc);

  // Okay, we know we have a line number table.  Do a binary search to find the
  // line number that this character position lands on.
  unsigned *SourceLineCache = Content->SourceLineCache;
  unsigned *SourceLineCacheStart = SourceLineCache;
  unsigned *SourceLineCacheEnd = SourceLineCache + Content->NumLines;
  
  unsigned QueriedFilePos = FilePos+1;

  // If the previous query was to the same file, we know both the file pos from
  // that query and the line number returned.  This allows us to narrow the
  // search space from the entire file to something near the match.
  if (LastLineNoFileIDQuery == FID) {
    if (QueriedFilePos >= LastLineNoFilePos) {
      SourceLineCache = SourceLineCache+LastLineNoResult-1;
      
      // The query is likely to be nearby the previous one.  Here we check to
      // see if it is within 5, 10 or 20 lines.  It can be far away in cases
      // where big comment blocks and vertical whitespace eat up lines but
      // contribute no tokens.
      if (SourceLineCache+5 < SourceLineCacheEnd) {
        if (SourceLineCache[5] > QueriedFilePos)
          SourceLineCacheEnd = SourceLineCache+5;
        else if (SourceLineCache+10 < SourceLineCacheEnd) {
          if (SourceLineCache[10] > QueriedFilePos)
            SourceLineCacheEnd = SourceLineCache+10;
          else if (SourceLineCache+20 < SourceLineCacheEnd) {
            if (SourceLineCache[20] > QueriedFilePos)
              SourceLineCacheEnd = SourceLineCache+20;
          }
        }
      }
    } else {
      SourceLineCacheEnd = SourceLineCache+LastLineNoResult+1;
    }
  }
  
  // If the spread is large, do a "radix" test as our initial guess, based on
  // the assumption that lines average to approximately the same length.
  // NOTE: This is currently disabled, as it does not appear to be profitable in
  // initial measurements.
  if (0 && SourceLineCacheEnd-SourceLineCache > 20) {
    unsigned FileLen = Content->SourceLineCache[Content->NumLines-1];
    
    // Take a stab at guessing where it is.
    unsigned ApproxPos = Content->NumLines*QueriedFilePos / FileLen;
    
    // Check for -10 and +10 lines.
    unsigned LowerBound = std::max(int(ApproxPos-10), 0);
    unsigned UpperBound = std::min(ApproxPos+10, FileLen);

    // If the computed lower bound is less than the query location, move it in.
    if (SourceLineCache < SourceLineCacheStart+LowerBound &&
        SourceLineCacheStart[LowerBound] < QueriedFilePos)
      SourceLineCache = SourceLineCacheStart+LowerBound;
    
    // If the computed upper bound is greater than the query location, move it.
    if (SourceLineCacheEnd > SourceLineCacheStart+UpperBound &&
        SourceLineCacheStart[UpperBound] >= QueriedFilePos)
      SourceLineCacheEnd = SourceLineCacheStart+UpperBound;
  }
  
  unsigned *Pos
    = std::lower_bound(SourceLineCache, SourceLineCacheEnd, QueriedFilePos);
  unsigned LineNo = Pos-SourceLineCacheStart;
  
  LastLineNoFileIDQuery = FID;
  LastLineNoContentCache = Content;
  LastLineNoFilePos = QueriedFilePos;
  LastLineNoResult = LineNo;
  return LineNo;
}

unsigned SourceManager::getInstantiationLineNumber(SourceLocation Loc) const {
  if (Loc.isInvalid()) return 0;
  std::pair<FileID, unsigned> LocInfo = getDecomposedInstantiationLoc(Loc);
  return getLineNumber(LocInfo.first, LocInfo.second);
}
unsigned SourceManager::getSpellingLineNumber(SourceLocation Loc) const {
  if (Loc.isInvalid()) return 0;
  std::pair<FileID, unsigned> LocInfo = getDecomposedSpellingLoc(Loc);
  return getLineNumber(LocInfo.first, LocInfo.second);
}

/// getFileCharacteristic - return the file characteristic of the specified
/// source location, indicating whether this is a normal file, a system 
/// header, or an "implicit extern C" system header.
///
/// This state can be modified with flags on GNU linemarker directives like:
///   # 4 "foo.h" 3
/// which changes all source locations in the current file after that to be
/// considered to be from a system header.
SrcMgr::CharacteristicKind 
SourceManager::getFileCharacteristic(SourceLocation Loc) const {
  assert(!Loc.isInvalid() && "Can't get file characteristic of invalid loc!");
  std::pair<FileID, unsigned> LocInfo = getDecomposedInstantiationLoc(Loc);
  const SrcMgr::FileInfo &FI = getSLocEntry(LocInfo.first).getFile();

  // If there are no #line directives in this file, just return the whole-file
  // state.
  if (!FI.hasLineDirectives())
    return FI.getFileCharacteristic();
  
  assert(LineTable && "Can't have linetable entries without a LineTable!");
  // See if there is a #line directive before the location.
  const LineEntry *Entry =
    LineTable->FindNearestLineEntry(LocInfo.first.ID, LocInfo.second);
  
  // If this is before the first line marker, use the file characteristic.
  if (!Entry)
    return FI.getFileCharacteristic();

  return Entry->FileKind;
}

/// Return the filename or buffer identifier of the buffer the location is in.
/// Note that this name does not respect #line directives.  Use getPresumedLoc
/// for normal clients.
const char *SourceManager::getBufferName(SourceLocation Loc) const {
  if (Loc.isInvalid()) return "<invalid loc>";
  
  return getBuffer(getFileID(Loc))->getBufferIdentifier();
}


/// getPresumedLoc - This method returns the "presumed" location of a
/// SourceLocation specifies.  A "presumed location" can be modified by #line
/// or GNU line marker directives.  This provides a view on the data that a
/// user should see in diagnostics, for example.
///
/// Note that a presumed location is always given as the instantiation point
/// of an instantiation location, not at the spelling location.
PresumedLoc SourceManager::getPresumedLoc(SourceLocation Loc) const {
  if (Loc.isInvalid()) return PresumedLoc();
  
  // Presumed locations are always for instantiation points.
  std::pair<FileID, unsigned> LocInfo = getDecomposedInstantiationLoc(Loc);
  
  const SrcMgr::FileInfo &FI = getSLocEntry(LocInfo.first).getFile();
  const SrcMgr::ContentCache *C = FI.getContentCache();
  
  // To get the source name, first consult the FileEntry (if one exists)
  // before the MemBuffer as this will avoid unnecessarily paging in the
  // MemBuffer.
  const char *Filename = 
    C->Entry ? C->Entry->getName() : C->getBuffer()->getBufferIdentifier();
  unsigned LineNo = getLineNumber(LocInfo.first, LocInfo.second);
  unsigned ColNo  = getColumnNumber(LocInfo.first, LocInfo.second);
  SourceLocation IncludeLoc = FI.getIncludeLoc();
  
  // If we have #line directives in this file, update and overwrite the physical
  // location info if appropriate.
  if (FI.hasLineDirectives()) {
    assert(LineTable && "Can't have linetable entries without a LineTable!");
    // See if there is a #line directive before this.  If so, get it.
    if (const LineEntry *Entry =
          LineTable->FindNearestLineEntry(LocInfo.first.ID, LocInfo.second)) {
      // If the LineEntry indicates a filename, use it.
      if (Entry->FilenameID != -1)
        Filename = LineTable->getFilename(Entry->FilenameID);

      // Use the line number specified by the LineEntry.  This line number may
      // be multiple lines down from the line entry.  Add the difference in
      // physical line numbers from the query point and the line marker to the
      // total.
      unsigned MarkerLineNo = getLineNumber(LocInfo.first, Entry->FileOffset);
      LineNo = Entry->LineNo + (LineNo-MarkerLineNo-1);
      
      // Note that column numbers are not molested by line markers.
      
      // Handle virtual #include manipulation.
      if (Entry->IncludeOffset) {
        IncludeLoc = getLocForStartOfFile(LocInfo.first);
        IncludeLoc = IncludeLoc.getFileLocWithOffset(Entry->IncludeOffset);
      }
    }
  }

  return PresumedLoc(Filename, LineNo, ColNo, IncludeLoc);
}

//===----------------------------------------------------------------------===//
// Other miscellaneous methods.
//===----------------------------------------------------------------------===//


/// PrintStats - Print statistics to stderr.
///
void SourceManager::PrintStats() const {
  llvm::cerr << "\n*** Source Manager Stats:\n";
  llvm::cerr << FileInfos.size() << " files mapped, " << MemBufferInfos.size()
             << " mem buffers mapped.\n";
  llvm::cerr << SLocEntryTable.size() << " SLocEntry's allocated, "
             << NextOffset << "B of Sloc address space used.\n";
    
  unsigned NumLineNumsComputed = 0;
  unsigned NumFileBytesMapped = 0;
  for (fileinfo_iterator I = fileinfo_begin(), E = fileinfo_end(); I != E; ++I){
    NumLineNumsComputed += I->second->SourceLineCache != 0;
    NumFileBytesMapped  += I->second->getSizeBytesMapped();
  }
  
  llvm::cerr << NumFileBytesMapped << " bytes of files mapped, "
             << NumLineNumsComputed << " files with line #'s computed.\n";
  llvm::cerr << "FileID scans: " << NumLinearScans << " linear, "
             << NumBinaryProbes << " binary.\n";
}

ExternalSLocEntrySource::~ExternalSLocEntrySource() { }