add include/linux/hdlc/ioctl.h
Need to add include/linux/hdlc/ioctl.h because it is not present
in older releases.
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
diff --git a/include/linux/hdlc/ioctl.h b/include/linux/hdlc/ioctl.h
new file mode 100644
index 0000000..5839723
--- /dev/null
+++ b/include/linux/hdlc/ioctl.h
@@ -0,0 +1,81 @@
+#ifndef __HDLC_IOCTL_H__
+#define __HDLC_IOCTL_H__
+
+
+#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */
+
+#define CLOCK_DEFAULT 0 /* Default setting */
+#define CLOCK_EXT 1 /* External TX and RX clock - DTE */
+#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */
+#define CLOCK_TXINT 3 /* Internal TX and external RX clock */
+#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */
+
+
+#define ENCODING_DEFAULT 0 /* Default setting */
+#define ENCODING_NRZ 1
+#define ENCODING_NRZI 2
+#define ENCODING_FM_MARK 3
+#define ENCODING_FM_SPACE 4
+#define ENCODING_MANCHESTER 5
+
+
+#define PARITY_DEFAULT 0 /* Default setting */
+#define PARITY_NONE 1 /* No parity */
+#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */
+#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */
+#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */
+#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */
+#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */
+#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */
+
+#define LMI_DEFAULT 0 /* Default setting */
+#define LMI_NONE 1 /* No LMI, all PVCs are static */
+#define LMI_ANSI 2 /* ANSI Annex D */
+#define LMI_CCITT 3 /* ITU-T Annex A */
+#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */
+
+typedef struct {
+ unsigned int clock_rate; /* bits per second */
+ unsigned int clock_type; /* internal, external, TX-internal etc. */
+ unsigned short loopback;
+} sync_serial_settings; /* V.35, V.24, X.21 */
+
+typedef struct {
+ unsigned int clock_rate; /* bits per second */
+ unsigned int clock_type; /* internal, external, TX-internal etc. */
+ unsigned short loopback;
+ unsigned int slot_map;
+} te1_settings; /* T1, E1 */
+
+typedef struct {
+ unsigned short encoding;
+ unsigned short parity;
+} raw_hdlc_proto;
+
+typedef struct {
+ unsigned int t391;
+ unsigned int t392;
+ unsigned int n391;
+ unsigned int n392;
+ unsigned int n393;
+ unsigned short lmi;
+ unsigned short dce; /* 1 for DCE (network side) operation */
+} fr_proto;
+
+typedef struct {
+ unsigned int dlci;
+} fr_proto_pvc; /* for creating/deleting FR PVCs */
+
+typedef struct {
+ unsigned int dlci;
+ char master[IFNAMSIZ]; /* Name of master FRAD device */
+}fr_proto_pvc_info; /* for returning PVC information only */
+
+typedef struct {
+ unsigned int interval;
+ unsigned int timeout;
+} cisco_proto;
+
+/* PPP doesn't need any info now - supply length = 0 to ioctl */
+
+#endif /* __HDLC_IOCTL_H__ */