blob: efa0641f7dd99f1ca4d9cea31494d0d8a3ff2848 [file] [log] [blame]
/* mach64_irq.c -- IRQ handling for ATI Mach64 -*- linux-c -*-
* Created: Tue Feb 25, 2003 by Leif Delgass, based on radeon_irq.c/r128_irq.c
*
* Copyright (C) The Weather Channel, Inc. 2002.
* Copyright 2003 Leif Delgass
* All Rights Reserved.
*
* The Weather Channel (TM) funded Tungsten Graphics to develop the
* initial release of the Radeon 8500 driver under the XFree86 license.
* This notice must be preserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Keith Whitwell <keith@tungstengraphics.com>
* Eric Anholt <anholt@FreeBSD.org>
* Leif Delgass <ldelgass@retinalburn.net>
*/
#include "mach64.h"
#include "drmP.h"
#include "drm.h"
#include "mach64_drm.h"
#include "mach64_drv.h"
irqreturn_t mach64_driver_irq_handler( DRM_IRQ_ARGS )
{
drm_device_t *dev = (drm_device_t *) arg;
drm_mach64_private_t *dev_priv =
(drm_mach64_private_t *)dev->dev_private;
int status;
status = MACH64_READ( MACH64_CRTC_INT_CNTL );
/* VBLANK interrupt */
if (status & MACH64_CRTC_VBLANK_INT) {
/* Mask off all interrupt ack bits before setting the ack bit, since
* there may be other handlers outside the DRM.
*
* NOTE: On mach64, you need to keep the enable bits set when doing
* the ack, despite what the docs say about not acking and enabling
* in a single write.
*/
MACH64_WRITE( MACH64_CRTC_INT_CNTL, (status & ~MACH64_CRTC_INT_ACKS)
| MACH64_CRTC_VBLANK_INT );
atomic_inc(&dev->vbl_received);
DRM_WAKEUP(&dev->vbl_queue);
DRM(vbl_send_signals)( dev );
return IRQ_HANDLED;
}
return IRQ_NONE;
}
int mach64_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence)
{
unsigned int cur_vblank;
int ret = 0;
/* Assume that the user has missed the current sequence number
* by about a day rather than she wants to wait for years
* using vertical blanks...
*/
DRM_WAIT_ON( ret, dev->vbl_queue, 3*DRM_HZ,
( ( ( cur_vblank = atomic_read(&dev->vbl_received ) )
- *sequence ) <= (1<<23) ) );
*sequence = cur_vblank;
return ret;
}
/* drm_dma.h hooks
*/
void mach64_driver_irq_preinstall( drm_device_t *dev ) {
drm_mach64_private_t *dev_priv =
(drm_mach64_private_t *)dev->dev_private;
u32 status = MACH64_READ( MACH64_CRTC_INT_CNTL );
DRM_DEBUG("before install CRTC_INT_CTNL: 0x%08x\n", status );
/* Disable and clear VBLANK interrupt */
MACH64_WRITE( MACH64_CRTC_INT_CNTL, (status & ~MACH64_CRTC_VBLANK_INT_EN)
| MACH64_CRTC_VBLANK_INT );
}
void mach64_driver_irq_postinstall( drm_device_t *dev ) {
drm_mach64_private_t *dev_priv =
(drm_mach64_private_t *)dev->dev_private;
/* Turn on VBLANK interrupt */
MACH64_WRITE( MACH64_CRTC_INT_CNTL, MACH64_READ( MACH64_CRTC_INT_CNTL )
| MACH64_CRTC_VBLANK_INT_EN );
DRM_DEBUG("after install CRTC_INT_CTNL: 0x%08x\n", MACH64_READ( MACH64_CRTC_INT_CNTL ));
}
void mach64_driver_irq_uninstall( drm_device_t *dev ) {
drm_mach64_private_t *dev_priv =
(drm_mach64_private_t *)dev->dev_private;
if ( !dev_priv )
return;
/* Disable and clear VBLANK interrupt */
MACH64_WRITE( MACH64_CRTC_INT_CNTL,
(MACH64_READ( MACH64_CRTC_INT_CNTL ) & ~MACH64_CRTC_VBLANK_INT_EN)
| MACH64_CRTC_VBLANK_INT );
DRM_DEBUG("after uninstall CRTC_INT_CTNL: 0x%08x\n",
MACH64_READ( MACH64_CRTC_INT_CNTL ));
}