Lucas Eckels | f869a6f | 2012-08-06 15:15:24 -0700 | [diff] [blame] | 1 | # Makefile.in generated by automake 1.9.6 from Makefile.am. |
| 2 | # @configure_input@ |
| 3 | |
| 4 | # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| 5 | # 2003, 2004, 2005 Free Software Foundation, Inc. |
| 6 | # This Makefile.in is free software; the Free Software Foundation |
| 7 | # gives unlimited permission to copy and/or distribute it, |
| 8 | # with or without modifications, as long as this notice is preserved. |
| 9 | |
| 10 | # This program is distributed in the hope that it will be useful, |
| 11 | # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| 12 | # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| 13 | # PARTICULAR PURPOSE. |
| 14 | |
| 15 | @SET_MAKE@ |
| 16 | |
| 17 | srcdir = @srcdir@ |
| 18 | top_srcdir = @top_srcdir@ |
| 19 | VPATH = @srcdir@ |
| 20 | pkgdatadir = $(datadir)/@PACKAGE@ |
| 21 | pkglibdir = $(libdir)/@PACKAGE@ |
| 22 | pkgincludedir = $(includedir)/@PACKAGE@ |
| 23 | top_builddir = .. |
| 24 | am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| 25 | INSTALL = @INSTALL@ |
| 26 | install_sh_DATA = $(install_sh) -c -m 644 |
| 27 | install_sh_PROGRAM = $(install_sh) -c |
| 28 | install_sh_SCRIPT = $(install_sh) -c |
| 29 | INSTALL_HEADER = $(INSTALL_DATA) |
| 30 | transform = $(program_transform_name) |
| 31 | NORMAL_INSTALL = : |
| 32 | PRE_INSTALL = : |
| 33 | POST_INSTALL = : |
| 34 | NORMAL_UNINSTALL = : |
| 35 | PRE_UNINSTALL = : |
| 36 | POST_UNINSTALL = : |
| 37 | build_triplet = @build@ |
| 38 | host_triplet = @host@ |
| 39 | subdir = doc |
| 40 | DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in |
| 41 | ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| 42 | am__aclocal_m4_deps = $(top_srcdir)/configure.in |
| 43 | am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| 44 | $(ACLOCAL_M4) |
| 45 | mkinstalldirs = $(install_sh) -d |
| 46 | CONFIG_HEADER = $(top_builddir)/config.h |
| 47 | CONFIG_CLEAN_FILES = |
| 48 | SOURCES = |
| 49 | DIST_SOURCES = |
| 50 | RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| 51 | html-recursive info-recursive install-data-recursive \ |
| 52 | install-exec-recursive install-info-recursive \ |
| 53 | install-recursive installcheck-recursive installdirs-recursive \ |
| 54 | pdf-recursive ps-recursive uninstall-info-recursive \ |
| 55 | uninstall-recursive |
| 56 | am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| 57 | am__vpath_adj = case $$p in \ |
| 58 | $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| 59 | *) f=$$p;; \ |
| 60 | esac; |
| 61 | am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| 62 | am__installdirs = "$(DESTDIR)$(docdir)" |
| 63 | docDATA_INSTALL = $(INSTALL_DATA) |
| 64 | DATA = $(doc_DATA) |
| 65 | ETAGS = etags |
| 66 | CTAGS = ctags |
| 67 | DIST_SUBDIRS = $(SUBDIRS) |
| 68 | DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| 69 | ACLOCAL = @ACLOCAL@ |
| 70 | AMDEP_FALSE = @AMDEP_FALSE@ |
| 71 | AMDEP_TRUE = @AMDEP_TRUE@ |
| 72 | AMTAR = @AMTAR@ |
| 73 | AR = @AR@ |
| 74 | AUTOCONF = @AUTOCONF@ |
| 75 | AUTOHEADER = @AUTOHEADER@ |
| 76 | AUTOMAKE = @AUTOMAKE@ |
| 77 | AWK = @AWK@ |
| 78 | CC = @CC@ |
| 79 | CCDEPMODE = @CCDEPMODE@ |
| 80 | CFLAGS = @CFLAGS@ |
| 81 | CPP = @CPP@ |
| 82 | CPPFLAGS = @CPPFLAGS@ |
| 83 | CYGPATH_W = @CYGPATH_W@ |
| 84 | DEBUG = @DEBUG@ |
| 85 | DEFS = @DEFS@ |
| 86 | DEPDIR = @DEPDIR@ |
| 87 | DSYMUTIL = @DSYMUTIL@ |
| 88 | DUMPBIN = @DUMPBIN@ |
| 89 | ECHO_C = @ECHO_C@ |
| 90 | ECHO_N = @ECHO_N@ |
| 91 | ECHO_T = @ECHO_T@ |
| 92 | EGREP = @EGREP@ |
| 93 | EXEEXT = @EXEEXT@ |
| 94 | FGREP = @FGREP@ |
| 95 | GREP = @GREP@ |
| 96 | INSTALL_DATA = @INSTALL_DATA@ |
| 97 | INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| 98 | INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| 99 | INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| 100 | LD = @LD@ |
| 101 | LDFLAGS = @LDFLAGS@ |
| 102 | LIBOBJS = @LIBOBJS@ |
| 103 | LIBS = @LIBS@ |
| 104 | LIBTOOL = @LIBTOOL@ |
| 105 | LIBTOOL_DEPS = @LIBTOOL_DEPS@ |
| 106 | LIB_AGE = @LIB_AGE@ |
| 107 | LIB_CURRENT = @LIB_CURRENT@ |
| 108 | LIB_REVISION = @LIB_REVISION@ |
| 109 | LIPO = @LIPO@ |
| 110 | LN_S = @LN_S@ |
| 111 | LTLIBOBJS = @LTLIBOBJS@ |
| 112 | MAINT = @MAINT@ |
| 113 | MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| 114 | MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| 115 | MAKEINFO = @MAKEINFO@ |
| 116 | NM = @NM@ |
| 117 | NMEDIT = @NMEDIT@ |
| 118 | OBJDUMP = @OBJDUMP@ |
| 119 | OBJEXT = @OBJEXT@ |
| 120 | OPT = @OPT@ |
| 121 | OTOOL = @OTOOL@ |
| 122 | OTOOL64 = @OTOOL64@ |
| 123 | PACKAGE = @PACKAGE@ |
| 124 | PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| 125 | PACKAGE_NAME = @PACKAGE_NAME@ |
| 126 | PACKAGE_STRING = @PACKAGE_STRING@ |
| 127 | PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| 128 | PACKAGE_VERSION = @PACKAGE_VERSION@ |
| 129 | PATH_SEPARATOR = @PATH_SEPARATOR@ |
| 130 | PROFILE = @PROFILE@ |
| 131 | RANLIB = @RANLIB@ |
| 132 | SED = @SED@ |
| 133 | SET_MAKE = @SET_MAKE@ |
| 134 | SHELL = @SHELL@ |
| 135 | SIZE16 = @SIZE16@ |
| 136 | SIZE32 = @SIZE32@ |
| 137 | SIZE64 = @SIZE64@ |
| 138 | STRIP = @STRIP@ |
| 139 | USIZE16 = @USIZE16@ |
| 140 | USIZE32 = @USIZE32@ |
| 141 | VERSION = @VERSION@ |
| 142 | ac_ct_CC = @ac_ct_CC@ |
| 143 | ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| 144 | am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| 145 | am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| 146 | am__include = @am__include@ |
| 147 | am__leading_dot = @am__leading_dot@ |
| 148 | am__quote = @am__quote@ |
| 149 | am__tar = @am__tar@ |
| 150 | am__untar = @am__untar@ |
| 151 | bindir = @bindir@ |
| 152 | build = @build@ |
| 153 | build_alias = @build_alias@ |
| 154 | build_cpu = @build_cpu@ |
| 155 | build_os = @build_os@ |
| 156 | build_vendor = @build_vendor@ |
| 157 | datadir = @datadir@ |
| 158 | datarootdir = @datarootdir@ |
| 159 | docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION) |
| 160 | dvidir = @dvidir@ |
| 161 | exec_prefix = @exec_prefix@ |
| 162 | host = @host@ |
| 163 | host_alias = @host_alias@ |
| 164 | host_cpu = @host_cpu@ |
| 165 | host_os = @host_os@ |
| 166 | host_vendor = @host_vendor@ |
| 167 | htmldir = @htmldir@ |
| 168 | includedir = @includedir@ |
| 169 | infodir = @infodir@ |
| 170 | install_sh = @install_sh@ |
| 171 | libdir = @libdir@ |
| 172 | libexecdir = @libexecdir@ |
| 173 | localedir = @localedir@ |
| 174 | localstatedir = @localstatedir@ |
| 175 | lt_ECHO = @lt_ECHO@ |
| 176 | mandir = @mandir@ |
| 177 | mkdir_p = @mkdir_p@ |
| 178 | oldincludedir = @oldincludedir@ |
| 179 | pdfdir = @pdfdir@ |
| 180 | prefix = @prefix@ |
| 181 | program_transform_name = @program_transform_name@ |
| 182 | psdir = @psdir@ |
| 183 | sbindir = @sbindir@ |
| 184 | sharedstatedir = @sharedstatedir@ |
| 185 | sysconfdir = @sysconfdir@ |
| 186 | target_alias = @target_alias@ |
| 187 | SUBDIRS = libogg |
| 188 | doc_DATA = framing.html index.html oggstream.html ogg-multiplex.html \ |
| 189 | stream.png vorbisword2.png white-ogg.png white-xifish.png \ |
| 190 | rfc3533.txt rfc5334.txt skeleton.html |
| 191 | |
| 192 | EXTRA_DIST = $(doc_DATA) |
| 193 | all: all-recursive |
| 194 | |
| 195 | .SUFFIXES: |
| 196 | $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| 197 | @for dep in $?; do \ |
| 198 | case '$(am__configure_deps)' in \ |
| 199 | *$$dep*) \ |
| 200 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
| 201 | && exit 0; \ |
| 202 | exit 1;; \ |
| 203 | esac; \ |
| 204 | done; \ |
| 205 | echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ |
| 206 | cd $(top_srcdir) && \ |
| 207 | $(AUTOMAKE) --gnu doc/Makefile |
| 208 | .PRECIOUS: Makefile |
| 209 | Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| 210 | @case '$?' in \ |
| 211 | *config.status*) \ |
| 212 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| 213 | *) \ |
| 214 | echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| 215 | cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| 216 | esac; |
| 217 | |
| 218 | $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| 219 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| 220 | |
| 221 | $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| 222 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| 223 | $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| 224 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| 225 | |
| 226 | mostlyclean-libtool: |
| 227 | -rm -f *.lo |
| 228 | |
| 229 | clean-libtool: |
| 230 | -rm -rf .libs _libs |
| 231 | |
| 232 | distclean-libtool: |
| 233 | -rm -f libtool |
| 234 | uninstall-info-am: |
| 235 | install-docDATA: $(doc_DATA) |
| 236 | @$(NORMAL_INSTALL) |
| 237 | test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)" |
| 238 | @list='$(doc_DATA)'; for p in $$list; do \ |
| 239 | if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| 240 | f=$(am__strip_dir) \ |
| 241 | echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ |
| 242 | $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ |
| 243 | done |
| 244 | |
| 245 | uninstall-docDATA: |
| 246 | @$(NORMAL_UNINSTALL) |
| 247 | @list='$(doc_DATA)'; for p in $$list; do \ |
| 248 | f=$(am__strip_dir) \ |
| 249 | echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ |
| 250 | rm -f "$(DESTDIR)$(docdir)/$$f"; \ |
| 251 | done |
| 252 | |
| 253 | # This directory's subdirectories are mostly independent; you can cd |
| 254 | # into them and run `make' without going through this Makefile. |
| 255 | # To change the values of `make' variables: instead of editing Makefiles, |
| 256 | # (1) if the variable is set in `config.status', edit `config.status' |
| 257 | # (which will cause the Makefiles to be regenerated when you run `make'); |
| 258 | # (2) otherwise, pass the desired values on the `make' command line. |
| 259 | $(RECURSIVE_TARGETS): |
| 260 | @failcom='exit 1'; \ |
| 261 | for f in x $$MAKEFLAGS; do \ |
| 262 | case $$f in \ |
| 263 | *=* | --[!k]*);; \ |
| 264 | *k*) failcom='fail=yes';; \ |
| 265 | esac; \ |
| 266 | done; \ |
| 267 | dot_seen=no; \ |
| 268 | target=`echo $@ | sed s/-recursive//`; \ |
| 269 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 270 | echo "Making $$target in $$subdir"; \ |
| 271 | if test "$$subdir" = "."; then \ |
| 272 | dot_seen=yes; \ |
| 273 | local_target="$$target-am"; \ |
| 274 | else \ |
| 275 | local_target="$$target"; \ |
| 276 | fi; \ |
| 277 | (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| 278 | || eval $$failcom; \ |
| 279 | done; \ |
| 280 | if test "$$dot_seen" = "no"; then \ |
| 281 | $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| 282 | fi; test -z "$$fail" |
| 283 | |
| 284 | mostlyclean-recursive clean-recursive distclean-recursive \ |
| 285 | maintainer-clean-recursive: |
| 286 | @failcom='exit 1'; \ |
| 287 | for f in x $$MAKEFLAGS; do \ |
| 288 | case $$f in \ |
| 289 | *=* | --[!k]*);; \ |
| 290 | *k*) failcom='fail=yes';; \ |
| 291 | esac; \ |
| 292 | done; \ |
| 293 | dot_seen=no; \ |
| 294 | case "$@" in \ |
| 295 | distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| 296 | *) list='$(SUBDIRS)' ;; \ |
| 297 | esac; \ |
| 298 | rev=''; for subdir in $$list; do \ |
| 299 | if test "$$subdir" = "."; then :; else \ |
| 300 | rev="$$subdir $$rev"; \ |
| 301 | fi; \ |
| 302 | done; \ |
| 303 | rev="$$rev ."; \ |
| 304 | target=`echo $@ | sed s/-recursive//`; \ |
| 305 | for subdir in $$rev; do \ |
| 306 | echo "Making $$target in $$subdir"; \ |
| 307 | if test "$$subdir" = "."; then \ |
| 308 | local_target="$$target-am"; \ |
| 309 | else \ |
| 310 | local_target="$$target"; \ |
| 311 | fi; \ |
| 312 | (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| 313 | || eval $$failcom; \ |
| 314 | done && test -z "$$fail" |
| 315 | tags-recursive: |
| 316 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 317 | test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| 318 | done |
| 319 | ctags-recursive: |
| 320 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 321 | test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| 322 | done |
| 323 | |
| 324 | ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| 325 | list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| 326 | unique=`for i in $$list; do \ |
| 327 | if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 328 | done | \ |
| 329 | $(AWK) ' { files[$$0] = 1; } \ |
| 330 | END { for (i in files) print i; }'`; \ |
| 331 | mkid -fID $$unique |
| 332 | tags: TAGS |
| 333 | |
| 334 | TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| 335 | $(TAGS_FILES) $(LISP) |
| 336 | tags=; \ |
| 337 | here=`pwd`; \ |
| 338 | if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| 339 | include_option=--etags-include; \ |
| 340 | empty_fix=.; \ |
| 341 | else \ |
| 342 | include_option=--include; \ |
| 343 | empty_fix=; \ |
| 344 | fi; \ |
| 345 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 346 | if test "$$subdir" = .; then :; else \ |
| 347 | test ! -f $$subdir/TAGS || \ |
| 348 | tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| 349 | fi; \ |
| 350 | done; \ |
| 351 | list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| 352 | unique=`for i in $$list; do \ |
| 353 | if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 354 | done | \ |
| 355 | $(AWK) ' { files[$$0] = 1; } \ |
| 356 | END { for (i in files) print i; }'`; \ |
| 357 | if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| 358 | test -n "$$unique" || unique=$$empty_fix; \ |
| 359 | $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| 360 | $$tags $$unique; \ |
| 361 | fi |
| 362 | ctags: CTAGS |
| 363 | CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| 364 | $(TAGS_FILES) $(LISP) |
| 365 | tags=; \ |
| 366 | here=`pwd`; \ |
| 367 | list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| 368 | unique=`for i in $$list; do \ |
| 369 | if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 370 | done | \ |
| 371 | $(AWK) ' { files[$$0] = 1; } \ |
| 372 | END { for (i in files) print i; }'`; \ |
| 373 | test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| 374 | || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| 375 | $$tags $$unique |
| 376 | |
| 377 | GTAGS: |
| 378 | here=`$(am__cd) $(top_builddir) && pwd` \ |
| 379 | && cd $(top_srcdir) \ |
| 380 | && gtags -i $(GTAGS_ARGS) $$here |
| 381 | |
| 382 | distclean-tags: |
| 383 | -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| 384 | |
| 385 | distdir: $(DISTFILES) |
| 386 | @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| 387 | topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| 388 | list='$(DISTFILES)'; for file in $$list; do \ |
| 389 | case $$file in \ |
| 390 | $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| 391 | $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| 392 | esac; \ |
| 393 | if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| 394 | dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| 395 | if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| 396 | dir="/$$dir"; \ |
| 397 | $(mkdir_p) "$(distdir)$$dir"; \ |
| 398 | else \ |
| 399 | dir=''; \ |
| 400 | fi; \ |
| 401 | if test -d $$d/$$file; then \ |
| 402 | if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| 403 | cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| 404 | fi; \ |
| 405 | cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| 406 | else \ |
| 407 | test -f $(distdir)/$$file \ |
| 408 | || cp -p $$d/$$file $(distdir)/$$file \ |
| 409 | || exit 1; \ |
| 410 | fi; \ |
| 411 | done |
| 412 | list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| 413 | if test "$$subdir" = .; then :; else \ |
| 414 | test -d "$(distdir)/$$subdir" \ |
| 415 | || $(mkdir_p) "$(distdir)/$$subdir" \ |
| 416 | || exit 1; \ |
| 417 | distdir=`$(am__cd) $(distdir) && pwd`; \ |
| 418 | top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| 419 | (cd $$subdir && \ |
| 420 | $(MAKE) $(AM_MAKEFLAGS) \ |
| 421 | top_distdir="$$top_distdir" \ |
| 422 | distdir="$$distdir/$$subdir" \ |
| 423 | distdir) \ |
| 424 | || exit 1; \ |
| 425 | fi; \ |
| 426 | done |
| 427 | check-am: all-am |
| 428 | check: check-recursive |
| 429 | all-am: Makefile $(DATA) |
| 430 | installdirs: installdirs-recursive |
| 431 | installdirs-am: |
| 432 | for dir in "$(DESTDIR)$(docdir)"; do \ |
| 433 | test -z "$$dir" || $(mkdir_p) "$$dir"; \ |
| 434 | done |
| 435 | install: install-recursive |
| 436 | install-exec: install-exec-recursive |
| 437 | install-data: install-data-recursive |
| 438 | uninstall: uninstall-recursive |
| 439 | |
| 440 | install-am: all-am |
| 441 | @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| 442 | |
| 443 | installcheck: installcheck-recursive |
| 444 | install-strip: |
| 445 | $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| 446 | install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| 447 | `test -z '$(STRIP)' || \ |
| 448 | echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| 449 | mostlyclean-generic: |
| 450 | |
| 451 | clean-generic: |
| 452 | |
| 453 | distclean-generic: |
| 454 | -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| 455 | |
| 456 | maintainer-clean-generic: |
| 457 | @echo "This command is intended for maintainers to use" |
| 458 | @echo "it deletes files that may require special tools to rebuild." |
| 459 | clean: clean-recursive |
| 460 | |
| 461 | clean-am: clean-generic clean-libtool mostlyclean-am |
| 462 | |
| 463 | distclean: distclean-recursive |
| 464 | -rm -f Makefile |
| 465 | distclean-am: clean-am distclean-generic distclean-libtool \ |
| 466 | distclean-tags |
| 467 | |
| 468 | dvi: dvi-recursive |
| 469 | |
| 470 | dvi-am: |
| 471 | |
| 472 | html: html-recursive |
| 473 | |
| 474 | info: info-recursive |
| 475 | |
| 476 | info-am: |
| 477 | |
| 478 | install-data-am: install-docDATA |
| 479 | |
| 480 | install-exec-am: |
| 481 | |
| 482 | install-info: install-info-recursive |
| 483 | |
| 484 | install-man: |
| 485 | |
| 486 | installcheck-am: |
| 487 | |
| 488 | maintainer-clean: maintainer-clean-recursive |
| 489 | -rm -f Makefile |
| 490 | maintainer-clean-am: distclean-am maintainer-clean-generic |
| 491 | |
| 492 | mostlyclean: mostlyclean-recursive |
| 493 | |
| 494 | mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| 495 | |
| 496 | pdf: pdf-recursive |
| 497 | |
| 498 | pdf-am: |
| 499 | |
| 500 | ps: ps-recursive |
| 501 | |
| 502 | ps-am: |
| 503 | |
| 504 | uninstall-am: uninstall-docDATA uninstall-info-am |
| 505 | |
| 506 | uninstall-info: uninstall-info-recursive |
| 507 | |
| 508 | .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ |
| 509 | clean clean-generic clean-libtool clean-recursive ctags \ |
| 510 | ctags-recursive distclean distclean-generic distclean-libtool \ |
| 511 | distclean-recursive distclean-tags distdir dvi dvi-am html \ |
| 512 | html-am info info-am install install-am install-data \ |
| 513 | install-data-am install-docDATA install-exec install-exec-am \ |
| 514 | install-info install-info-am install-man install-strip \ |
| 515 | installcheck installcheck-am installdirs installdirs-am \ |
| 516 | maintainer-clean maintainer-clean-generic \ |
| 517 | maintainer-clean-recursive mostlyclean mostlyclean-generic \ |
| 518 | mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ |
| 519 | tags tags-recursive uninstall uninstall-am uninstall-docDATA \ |
| 520 | uninstall-info-am |
| 521 | |
| 522 | # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| 523 | # Otherwise a system limit (for SysV at least) may be exceeded. |
| 524 | .NOEXPORT: |