auto import from //depot/cupcake/@135843
diff --git a/atmuni31.h b/atmuni31.h
new file mode 100644
index 0000000..877ed68
--- /dev/null
+++ b/atmuni31.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Yen Yen Lim and
+ North Dakota State University
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/atmuni31.h,v 1.1 2002/07/11 09:06:32 guy Exp $ (LBL)
+ */
+
+/* Based on UNI3.1 standard by ATM Forum */
+
+/* ATM traffic types based on VPI=0 and (the following VCI */
+#define PPC 0x05 /* Point-to-point signal msg */
+#define BCC 0x02 /* Broadcast signal msg */
+#define OAMF4SC 0x03 /* Segment OAM F4 flow cell */
+#define OAMF4EC 0x04 /* End-to-end OAM F4 flow cell */
+#define METAC 0x01 /* Meta signal msg */
+#define ILMIC 0x10 /* ILMI msg */
+
+/* Q.2931 signalling messages */
+#define CALL_PROCEED 0x02 /* call proceeding */
+#define CONNECT 0x07 /* connect */
+#define CONNECT_ACK 0x0f /* connect_ack */
+#define SETUP 0x05 /* setup */
+#define RELEASE 0x4d /* release */
+#define RELEASE_DONE 0x5a /* release_done */
+#define RESTART 0x46 /* restart */
+#define RESTART_ACK 0x4e /* restart ack */
+#define STATUS 0x7d /* status */
+#define STATUS_ENQ 0x75 /* status ack */
+#define ADD_PARTY 0x80 /* add party */
+#define ADD_PARTY_ACK 0x81 /* add party ack */
+#define ADD_PARTY_REJ 0x82 /* add party rej */
+#define DROP_PARTY 0x83 /* drop party */
+#define DROP_PARTY_ACK 0x84 /* drop party ack */
+
+/* Information Element Parameters in the signalling messages */
+#define CAUSE 0x08 /* cause */
+#define ENDPT_REF 0x54 /* endpoint reference */
+#define AAL_PARA 0x58 /* ATM adaptation layer parameters */
+#define TRAFF_DESCRIP 0x59 /* atm traffic descriptors */
+#define CONNECT_ID 0x5a /* connection identifier */
+#define QOS_PARA 0x5c /* quality of service parameters */
+#define B_HIGHER 0x5d /* broadband higher layer information */
+#define B_BEARER 0x5e /* broadband bearer capability */
+#define B_LOWER 0x5f /* broadband lower information */
+#define CALLING_PARTY 0x6c /* calling party number */
+#define CALLED_PARTY 0x70 /* called party nmber */
+
+#define Q2931 0x09
+
+/* Q.2931 signalling general messages format */
+#define PROTO_POS 0 /* offset of protocol discriminator */
+#define CALL_REF_POS 2 /* offset of call reference value */
+#define MSG_TYPE_POS 5 /* offset of message type */
+#define MSG_LEN_POS 7 /* offset of mesage length */
+#define IE_BEGIN_POS 9 /* offset of first information element */
+
+/* format of signalling messages */
+#define TYPE_POS 0
+#define LEN_POS 2
+#define FIELD_BEGIN_POS 4