| 2010-10-28 v0.9.5 "Aylesbury" |
| Our first named release, focused on a faster decoder, and a better encoder. |
| |
| - Upgrading: |
| This release incorporates backwards-incompatible changes to the |
| ivfenc and ivfdec tools. These tools are now called vpxenc and vpxdec. |
| |
| vpxdec |
| * the -q (quiet) option has been removed, and replaced with |
| -v (verbose). the output is quiet by default. Use -v to see |
| the version number of the binary. |
| |
| * The default behavior is now to write output to a single file |
| instead of individual frames. The -y option has been removed. |
| Y4M output is the default. |
| |
| * For raw I420/YV12 output instead of Y4M, the --i420 or --yv12 |
| options must be specified. |
| |
| $ ivfdec -o OUTPUT INPUT |
| $ vpxdec --i420 -o OUTPUT INPUT |
| |
| * If an output file is not specified, the default is to write |
| Y4M to stdout. This makes piping more natural. |
| |
| $ ivfdec -y -o - INPUT | ... |
| $ vpxdec INPUT | ... |
| |
| * The output file has additional flexibility for formatting the |
| filename. It supports escape characters for constructing a |
| filename from the width, height, and sequence number. This |
| replaces the -p option. To get the equivalent: |
| |
| $ ivfdec -p frame INPUT |
| $ vpxdec --i420 -o frame-%wx%h-%4.i420 INPUT |
| |
| vpxenc |
| * The output file must be specified with -o, rather than as the |
| last argument. |
| |
| $ ivfenc <options> INPUT OUTPUT |
| $ vpxenc <options> -o OUTPUT INPUT |
| |
| * The output defaults to webm. To get IVF output, use the --ivf |
| option. |
| |
| $ ivfenc <options> INPUT OUTPUT.ivf |
| $ vpxenc <options> -o OUTPUT.ivf --ivf INPUT |
| |
| |
| - Enhancements: |
| ivfenc and ivfdec have been renamed to vpxenc, vpxdec. |
| vpxdec supports .webm input |
| vpxdec writes .y4m by default |
| vpxenc writes .webm output by default |
| vpxenc --psnr now shows the average/overall PSNR at the end |
| ARM platforms now support runtime cpu detection |
| vpxdec visualizations added for motion vectors, block modes, references |
| vpxdec now silent by default |
| vpxdec --progress shows frame-by-frame timing information |
| vpxenc supports the distinction between --fps and --timebase |
| NASM is now a supported assembler |
| configure: enable PIC for shared libs by default |
| configure: add --enable-small |
| configure: support for ppc32-linux-gcc |
| configure: support for sparc-solaris-gcc |
| |
| - Bugs: |
| Improve handling of invalid frames |
| Fix valgrind errors in the NEON loop filters. |
| Fix loopfilter delta zero transitions |
| Fix valgrind errors in vp8_sixtap_predict8x4_armv6(). |
| Build fixes for darwin-icc |
| |
| - Speed: |
| 20-40% (average 28%) improvement in libvpx decoder speed, |
| including: |
| Rewrite vp8_short_walsh4x4_sse2() |
| Optimizations on the loopfilters. |
| Miscellaneous improvements for Atom |
| Add 4-tap version of 2nd-pass ARMv6 MC filter. |
| Improved multithread utilization |
| Better instruction choices on x86 |
| reorder data to use wider instructions |
| Update NEON wide idcts |
| Make block access to frame buffer sequential |
| Improved subset block search |
| Bilinear subpixel optimizations for ssse3. |
| Decrease memory footprint |
| |
| Encoder speed improvements (percentage gain not measured): |
| Skip unnecessary search of identical frames |
| Add SSE2 subtract functions |
| Improve bounds checking in vp8_diamond_search_sadx4() |
| Added vp8_fast_quantize_b_sse2 |
| |
| - Quality: |
| Over 7% overall PSNR improvement (6.3% SSIM) in "best" quality |
| encoding mode, and up to 60% improvement on very noisy, still |
| or slow moving source video |
| |
| Motion compensated temporal filter for Alt-Ref Noise Reduction |
| Improved use of trellis quantization on 2nd order Y blocks |
| Tune effect of motion on KF/GF boost in two pass |
| Allow coefficient optimization for good quality speed 0. |
| Improved control of active min quantizer for two pass. |
| Enable ARFs for non-lagged compress |
| |
| 2010-09-02 v0.9.2 |
| - Enhancements: |
| Disable frame dropping by default |
| Improved multithreaded performance |
| Improved Force Key Frame Behaviour |
| Increased rate control buffer level precision |
| Fix bug in 1st pass motion compensation |
| ivfenc: correct fixed kf interval, --disable-kf |
| - Speed: |
| Changed above and left context data layout |
| Rework idct calling structure. |
| Removed unnecessary MB_MODE_INFO copies |
| x86: SSSE3 sixtap prediction |
| Reworked IDCT to include reconstruction (add) step |
| Swap alt/gold/new/last frame buffer ptrs instead of copying. |
| Improve SSE2 loopfilter functions |
| Change bitreader to use a larger window. |
| Avoid loopfilter reinitialization when possible |
| - Quality: |
| Normalize quantizer's zero bin and rounding factors |
| Add trellis quantization. |
| Make the quantizer exact. |
| Updates to ARNR filtering algorithm |
| Fix breakout thresh computation for golden & AltRef frames |
| Redo the forward 4x4 dct |
| Improve the accuracy of forward walsh-hadamard transform |
| Further adjustment of RD behaviour with Q and Zbin. |
| - Build System: |
| Allow linking of libs built with MinGW to MSVC |
| Fix target auto-detection on mingw32 |
| Allow --cpu= to work for x86. |
| configure: pass original arguments through to make dist |
| Fix builds without runtime CPU detection |
| msvs: fix install of codec sources |
| msvs: Change devenv.com command line for better msys support |
| msvs: Add vs9 targets. |
| Add x86_64-linux-icc target |
| - Bugs: |
| Potential crashes on older MinGW builds |
| Fix two-pass framrate for Y4M input. |
| Fixed simple loop filter, other crashes on ARM v6 |
| arm: fix missing dependency with --enable-shared |
| configure: support directories containing .o |
| Replace pinsrw (SSE) with MMX instructions |
| apple: include proper mach primatives |
| Fixed rate control bug with long key frame interval. |
| Fix DSO link errors on x86-64 when not using a version script |
| Fixed buffer selection for UV in AltRef filtering |
| |
| |
| 2010-06-17 v0.9.1 |
| - Enhancements: |
| * ivfenc/ivfdec now support YUV4MPEG2 input and pipe I/O |
| * Speed optimizations |
| - Bugfixes: |
| * Rate control |
| * Prevent out-of-bounds accesses on invalid data |
| - Build system updates: |
| * Detect toolchain to be used automatically for native builds |
| * Support building shared libraries |
| * Better autotools emulation (--prefix, --libdir, DESTDIR) |
| - Updated LICENSE |
| * http://webmproject.blogspot.com/2010/06/changes-to-webm-open-source-license.html |
| |
| |
| 2010-05-18 v0.9.0 |
| - Initial open source release. Welcome to WebM and VP8! |
| |