| //===-- DWARFCallFrameInfo.cpp ----------------------------------*- C++ -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| |
| // C Includes |
| // C++ Includes |
| #include <list> |
| |
| #include "lldb/Core/Log.h" |
| #include "lldb/Core/Section.h" |
| #include "lldb/Core/ArchSpec.h" |
| #include "lldb/Core/Module.h" |
| #include "lldb/Core/Section.h" |
| #include "lldb/Core/Timer.h" |
| #include "lldb/Host/Host.h" |
| #include "lldb/Symbol/DWARFCallFrameInfo.h" |
| #include "lldb/Symbol/ObjectFile.h" |
| #include "lldb/Symbol/UnwindPlan.h" |
| #include "lldb/Target/RegisterContext.h" |
| #include "lldb/Target/Thread.h" |
| |
| using namespace lldb; |
| using namespace lldb_private; |
| |
| DWARFCallFrameInfo::DWARFCallFrameInfo(ObjectFile& objfile, SectionSP& section_sp, lldb::RegisterKind reg_kind, bool is_eh_frame) : |
| m_objfile (objfile), |
| m_section_sp (section_sp), |
| m_reg_kind (reg_kind), // The flavor of registers that the CFI data uses (enum RegisterKind) |
| m_flags (), |
| m_cie_map (), |
| m_cfi_data (), |
| m_cfi_data_initialized (false), |
| m_fde_index (), |
| m_fde_index_initialized (false), |
| m_is_eh_frame (is_eh_frame) |
| { |
| } |
| |
| DWARFCallFrameInfo::~DWARFCallFrameInfo() |
| { |
| } |
| |
| |
| bool |
| DWARFCallFrameInfo::GetUnwindPlan (Address addr, UnwindPlan& unwind_plan) |
| { |
| FDEEntryMap::Entry fde_entry; |
| |
| // Make sure that the Address we're searching for is the same object file |
| // as this DWARFCallFrameInfo, we only store File offsets in m_fde_index. |
| ModuleSP module_sp = addr.GetModule(); |
| if (module_sp.get() == NULL || module_sp->GetObjectFile() == NULL || module_sp->GetObjectFile() != &m_objfile) |
| return false; |
| |
| if (GetFDEEntryByFileAddress (addr.GetFileAddress(), fde_entry) == false) |
| return false; |
| return FDEToUnwindPlan (fde_entry.data, addr, unwind_plan); |
| } |
| |
| bool |
| DWARFCallFrameInfo::GetAddressRange (Address addr, AddressRange &range) |
| { |
| |
| // Make sure that the Address we're searching for is the same object file |
| // as this DWARFCallFrameInfo, we only store File offsets in m_fde_index. |
| ModuleSP module_sp = addr.GetModule(); |
| if (module_sp.get() == NULL || module_sp->GetObjectFile() == NULL || module_sp->GetObjectFile() != &m_objfile) |
| return false; |
| |
| if (m_section_sp.get() == NULL || m_section_sp->IsEncrypted()) |
| return false; |
| GetFDEIndex(); |
| FDEEntryMap::Entry *fde_entry = m_fde_index.FindEntryThatContains (addr.GetFileAddress()); |
| if (!fde_entry) |
| return false; |
| |
| range = AddressRange(fde_entry->base, fde_entry->size, m_objfile.GetSectionList()); |
| return true; |
| } |
| |
| bool |
| DWARFCallFrameInfo::GetFDEEntryByFileAddress (addr_t file_addr, FDEEntryMap::Entry &fde_entry) |
| { |
| if (m_section_sp.get() == NULL || m_section_sp->IsEncrypted()) |
| return false; |
| |
| GetFDEIndex(); |
| |
| if (m_fde_index.IsEmpty()) |
| return false; |
| |
| FDEEntryMap::Entry *fde = m_fde_index.FindEntryThatContains (file_addr); |
| |
| if (fde == NULL) |
| return false; |
| |
| fde_entry = *fde; |
| return true; |
| } |
| |
| void |
| DWARFCallFrameInfo::GetFunctionAddressAndSizeVector (FunctionAddressAndSizeVector &function_info) |
| { |
| GetFDEIndex(); |
| const size_t count = m_fde_index.GetSize(); |
| function_info.Clear(); |
| if (count > 0) |
| function_info.Reserve(count); |
| for (size_t i = 0; i < count; ++i) |
| { |
| const FDEEntryMap::Entry *func_offset_data_entry = m_fde_index.GetEntryAtIndex (i); |
| if (func_offset_data_entry) |
| { |
| FunctionAddressAndSizeVector::Entry function_offset_entry (func_offset_data_entry->base, func_offset_data_entry->size); |
| function_info.Append (function_offset_entry); |
| } |
| } |
| } |
| |
| const DWARFCallFrameInfo::CIE* |
| DWARFCallFrameInfo::GetCIE(dw_offset_t cie_offset) |
| { |
| cie_map_t::iterator pos = m_cie_map.find(cie_offset); |
| |
| if (pos != m_cie_map.end()) |
| { |
| // Parse and cache the CIE |
| if (pos->second.get() == NULL) |
| pos->second = ParseCIE (cie_offset); |
| |
| return pos->second.get(); |
| } |
| return NULL; |
| } |
| |
| DWARFCallFrameInfo::CIESP |
| DWARFCallFrameInfo::ParseCIE (const dw_offset_t cie_offset) |
| { |
| CIESP cie_sp(new CIE(cie_offset)); |
| lldb::offset_t offset = cie_offset; |
| if (m_cfi_data_initialized == false) |
| GetCFIData(); |
| const uint32_t length = m_cfi_data.GetU32(&offset); |
| const dw_offset_t cie_id = m_cfi_data.GetU32(&offset); |
| const dw_offset_t end_offset = cie_offset + length + 4; |
| if (length > 0 && ((!m_is_eh_frame && cie_id == UINT32_MAX) || (m_is_eh_frame && cie_id == 0ul))) |
| { |
| size_t i; |
| // cie.offset = cie_offset; |
| // cie.length = length; |
| // cie.cieID = cieID; |
| cie_sp->ptr_encoding = DW_EH_PE_absptr; |
| cie_sp->version = m_cfi_data.GetU8(&offset); |
| |
| for (i=0; i<CFI_AUG_MAX_SIZE; ++i) |
| { |
| cie_sp->augmentation[i] = m_cfi_data.GetU8(&offset); |
| if (cie_sp->augmentation[i] == '\0') |
| { |
| // Zero out remaining bytes in augmentation string |
| for (size_t j = i+1; j<CFI_AUG_MAX_SIZE; ++j) |
| cie_sp->augmentation[j] = '\0'; |
| |
| break; |
| } |
| } |
| |
| if (i == CFI_AUG_MAX_SIZE && cie_sp->augmentation[CFI_AUG_MAX_SIZE-1] != '\0') |
| { |
| Host::SystemLog (Host::eSystemLogError, "CIE parse error: CIE augmentation string was too large for the fixed sized buffer of %d bytes.\n", CFI_AUG_MAX_SIZE); |
| return cie_sp; |
| } |
| cie_sp->code_align = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| cie_sp->data_align = (int32_t)m_cfi_data.GetSLEB128(&offset); |
| cie_sp->return_addr_reg_num = m_cfi_data.GetU8(&offset); |
| |
| if (cie_sp->augmentation[0]) |
| { |
| // Get the length of the eh_frame augmentation data |
| // which starts with a ULEB128 length in bytes |
| const size_t aug_data_len = (size_t)m_cfi_data.GetULEB128(&offset); |
| const size_t aug_data_end = offset + aug_data_len; |
| const size_t aug_str_len = strlen(cie_sp->augmentation); |
| // A 'z' may be present as the first character of the string. |
| // If present, the Augmentation Data field shall be present. |
| // The contents of the Augmentation Data shall be intepreted |
| // according to other characters in the Augmentation String. |
| if (cie_sp->augmentation[0] == 'z') |
| { |
| // Extract the Augmentation Data |
| size_t aug_str_idx = 0; |
| for (aug_str_idx = 1; aug_str_idx < aug_str_len; aug_str_idx++) |
| { |
| char aug = cie_sp->augmentation[aug_str_idx]; |
| switch (aug) |
| { |
| case 'L': |
| // Indicates the presence of one argument in the |
| // Augmentation Data of the CIE, and a corresponding |
| // argument in the Augmentation Data of the FDE. The |
| // argument in the Augmentation Data of the CIE is |
| // 1-byte and represents the pointer encoding used |
| // for the argument in the Augmentation Data of the |
| // FDE, which is the address of a language-specific |
| // data area (LSDA). The size of the LSDA pointer is |
| // specified by the pointer encoding used. |
| m_cfi_data.GetU8(&offset); |
| break; |
| |
| case 'P': |
| // Indicates the presence of two arguments in the |
| // Augmentation Data of the cie_sp-> The first argument |
| // is 1-byte and represents the pointer encoding |
| // used for the second argument, which is the |
| // address of a personality routine handler. The |
| // size of the personality routine pointer is |
| // specified by the pointer encoding used. |
| { |
| uint8_t arg_ptr_encoding = m_cfi_data.GetU8(&offset); |
| m_cfi_data.GetGNUEHPointer(&offset, arg_ptr_encoding, LLDB_INVALID_ADDRESS, LLDB_INVALID_ADDRESS, LLDB_INVALID_ADDRESS); |
| } |
| break; |
| |
| case 'R': |
| // A 'R' may be present at any position after the |
| // first character of the string. The Augmentation |
| // Data shall include a 1 byte argument that |
| // represents the pointer encoding for the address |
| // pointers used in the FDE. |
| cie_sp->ptr_encoding = m_cfi_data.GetU8(&offset); |
| break; |
| } |
| } |
| } |
| else if (strcmp(cie_sp->augmentation, "eh") == 0) |
| { |
| // If the Augmentation string has the value "eh", then |
| // the EH Data field shall be present |
| } |
| |
| // Set the offset to be the end of the augmentation data just in case |
| // we didn't understand any of the data. |
| offset = (uint32_t)aug_data_end; |
| } |
| |
| if (end_offset > offset) |
| { |
| cie_sp->inst_offset = offset; |
| cie_sp->inst_length = end_offset - offset; |
| } |
| while (offset < end_offset) |
| { |
| uint8_t inst = m_cfi_data.GetU8(&offset); |
| uint8_t primary_opcode = inst & 0xC0; |
| uint8_t extended_opcode = inst & 0x3F; |
| |
| if (extended_opcode == DW_CFA_def_cfa) |
| { |
| // Takes two unsigned LEB128 operands representing a register |
| // number and a (non-factored) offset. The required action |
| // is to define the current CFA rule to use the provided |
| // register and offset. |
| uint32_t reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| int op_offset = (int32_t)m_cfi_data.GetULEB128(&offset); |
| cie_sp->initial_row.SetCFARegister (reg_num); |
| cie_sp->initial_row.SetCFAOffset (op_offset); |
| continue; |
| } |
| if (primary_opcode == DW_CFA_offset) |
| { |
| // 0x80 - high 2 bits are 0x2, lower 6 bits are register. |
| // Takes two arguments: an unsigned LEB128 constant representing a |
| // factored offset and a register number. The required action is to |
| // change the rule for the register indicated by the register number |
| // to be an offset(N) rule with a value of |
| // (N = factored offset * data_align). |
| uint32_t reg_num = extended_opcode; |
| int op_offset = (int32_t)m_cfi_data.GetULEB128(&offset) * cie_sp->data_align; |
| UnwindPlan::Row::RegisterLocation reg_location; |
| reg_location.SetAtCFAPlusOffset(op_offset); |
| cie_sp->initial_row.SetRegisterInfo (reg_num, reg_location); |
| continue; |
| } |
| if (extended_opcode == DW_CFA_nop) |
| { |
| continue; |
| } |
| break; // Stop if we hit an unrecognized opcode |
| } |
| } |
| |
| return cie_sp; |
| } |
| |
| void |
| DWARFCallFrameInfo::GetCFIData() |
| { |
| if (m_cfi_data_initialized == false) |
| { |
| Log *log(GetLogIfAllCategoriesSet (LIBLLDB_LOG_UNWIND)); |
| if (log) |
| m_objfile.GetModule()->LogMessage(log, "Reading EH frame info"); |
| m_objfile.ReadSectionData (m_section_sp.get(), m_cfi_data); |
| m_cfi_data_initialized = true; |
| } |
| } |
| // Scan through the eh_frame or debug_frame section looking for FDEs and noting the start/end addresses |
| // of the functions and a pointer back to the function's FDE for later expansion. |
| // Internalize CIEs as we come across them. |
| |
| void |
| DWARFCallFrameInfo::GetFDEIndex () |
| { |
| if (m_section_sp.get() == NULL || m_section_sp->IsEncrypted()) |
| return; |
| |
| if (m_fde_index_initialized) |
| return; |
| |
| Mutex::Locker locker(m_fde_index_mutex); |
| |
| if (m_fde_index_initialized) // if two threads hit the locker |
| return; |
| |
| Timer scoped_timer (__PRETTY_FUNCTION__, "%s - %s", __PRETTY_FUNCTION__, m_objfile.GetFileSpec().GetFilename().AsCString("")); |
| |
| lldb::offset_t offset = 0; |
| if (m_cfi_data_initialized == false) |
| GetCFIData(); |
| while (m_cfi_data.ValidOffsetForDataOfSize (offset, 8)) |
| { |
| const dw_offset_t current_entry = offset; |
| uint32_t len = m_cfi_data.GetU32 (&offset); |
| dw_offset_t next_entry = current_entry + len + 4; |
| dw_offset_t cie_id = m_cfi_data.GetU32 (&offset); |
| |
| if (cie_id == 0 || cie_id == UINT32_MAX) |
| { |
| m_cie_map[current_entry] = ParseCIE (current_entry); |
| offset = next_entry; |
| continue; |
| } |
| |
| const dw_offset_t cie_offset = current_entry + 4 - cie_id; |
| const CIE *cie = GetCIE (cie_offset); |
| if (cie) |
| { |
| const lldb::addr_t pc_rel_addr = m_section_sp->GetFileAddress(); |
| const lldb::addr_t text_addr = LLDB_INVALID_ADDRESS; |
| const lldb::addr_t data_addr = LLDB_INVALID_ADDRESS; |
| |
| lldb::addr_t addr = m_cfi_data.GetGNUEHPointer(&offset, cie->ptr_encoding, pc_rel_addr, text_addr, data_addr); |
| lldb::addr_t length = m_cfi_data.GetGNUEHPointer(&offset, cie->ptr_encoding & DW_EH_PE_MASK_ENCODING, pc_rel_addr, text_addr, data_addr); |
| FDEEntryMap::Entry fde (addr, length, current_entry); |
| m_fde_index.Append(fde); |
| } |
| else |
| { |
| Host::SystemLog (Host::eSystemLogError, |
| "error: unable to find CIE at 0x%8.8x for cie_id = 0x%8.8x for entry at 0x%8.8x.\n", |
| cie_offset, |
| cie_id, |
| current_entry); |
| } |
| offset = next_entry; |
| } |
| m_fde_index.Sort(); |
| m_fde_index_initialized = true; |
| } |
| |
| bool |
| DWARFCallFrameInfo::FDEToUnwindPlan (dw_offset_t dwarf_offset, Address startaddr, UnwindPlan& unwind_plan) |
| { |
| lldb::offset_t offset = dwarf_offset; |
| lldb::offset_t current_entry = offset; |
| |
| if (m_section_sp.get() == NULL || m_section_sp->IsEncrypted()) |
| return false; |
| |
| if (m_cfi_data_initialized == false) |
| GetCFIData(); |
| |
| uint32_t length = m_cfi_data.GetU32 (&offset); |
| dw_offset_t cie_offset = m_cfi_data.GetU32 (&offset); |
| |
| assert (cie_offset != 0 && cie_offset != UINT32_MAX); |
| |
| // Translate the CIE_id from the eh_frame format, which |
| // is relative to the FDE offset, into a __eh_frame section |
| // offset |
| if (m_is_eh_frame) |
| { |
| unwind_plan.SetSourceName ("eh_frame CFI"); |
| cie_offset = current_entry + 4 - cie_offset; |
| unwind_plan.SetUnwindPlanValidAtAllInstructions (eLazyBoolNo); |
| } |
| else |
| { |
| unwind_plan.SetSourceName ("DWARF CFI"); |
| // In theory the debug_frame info should be valid at all call sites |
| // ("asynchronous unwind info" as it is sometimes called) but in practice |
| // gcc et al all emit call frame info for the prologue and call sites, but |
| // not for the epilogue or all the other locations during the function reliably. |
| unwind_plan.SetUnwindPlanValidAtAllInstructions (eLazyBoolNo); |
| } |
| unwind_plan.SetSourcedFromCompiler (eLazyBoolYes); |
| |
| const CIE *cie = GetCIE (cie_offset); |
| assert (cie != NULL); |
| |
| const dw_offset_t end_offset = current_entry + length + 4; |
| |
| const lldb::addr_t pc_rel_addr = m_section_sp->GetFileAddress(); |
| const lldb::addr_t text_addr = LLDB_INVALID_ADDRESS; |
| const lldb::addr_t data_addr = LLDB_INVALID_ADDRESS; |
| lldb::addr_t range_base = m_cfi_data.GetGNUEHPointer(&offset, cie->ptr_encoding, pc_rel_addr, text_addr, data_addr); |
| lldb::addr_t range_len = m_cfi_data.GetGNUEHPointer(&offset, cie->ptr_encoding & DW_EH_PE_MASK_ENCODING, pc_rel_addr, text_addr, data_addr); |
| AddressRange range (range_base, m_objfile.GetAddressByteSize(), m_objfile.GetSectionList()); |
| range.SetByteSize (range_len); |
| |
| if (cie->augmentation[0] == 'z') |
| { |
| uint32_t aug_data_len = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| offset += aug_data_len; |
| } |
| |
| uint32_t reg_num = 0; |
| int32_t op_offset = 0; |
| uint32_t code_align = cie->code_align; |
| int32_t data_align = cie->data_align; |
| |
| unwind_plan.SetPlanValidAddressRange (range); |
| UnwindPlan::Row *cie_initial_row = new UnwindPlan::Row; |
| *cie_initial_row = cie->initial_row; |
| UnwindPlan::RowSP row(cie_initial_row); |
| |
| unwind_plan.SetRegisterKind (m_reg_kind); |
| unwind_plan.SetReturnAddressRegister (cie->return_addr_reg_num); |
| |
| UnwindPlan::Row::RegisterLocation reg_location; |
| while (m_cfi_data.ValidOffset(offset) && offset < end_offset) |
| { |
| uint8_t inst = m_cfi_data.GetU8(&offset); |
| uint8_t primary_opcode = inst & 0xC0; |
| uint8_t extended_opcode = inst & 0x3F; |
| |
| if (primary_opcode) |
| { |
| switch (primary_opcode) |
| { |
| case DW_CFA_advance_loc : // (Row Creation Instruction) |
| { // 0x40 - high 2 bits are 0x1, lower 6 bits are delta |
| // takes a single argument that represents a constant delta. The |
| // required action is to create a new table row with a location |
| // value that is computed by taking the current entry's location |
| // value and adding (delta * code_align). All other |
| // values in the new row are initially identical to the current row. |
| unwind_plan.AppendRow(row); |
| UnwindPlan::Row *newrow = new UnwindPlan::Row; |
| *newrow = *row.get(); |
| row.reset (newrow); |
| row->SlideOffset(extended_opcode * code_align); |
| } |
| break; |
| |
| case DW_CFA_offset : |
| { // 0x80 - high 2 bits are 0x2, lower 6 bits are register |
| // takes two arguments: an unsigned LEB128 constant representing a |
| // factored offset and a register number. The required action is to |
| // change the rule for the register indicated by the register number |
| // to be an offset(N) rule with a value of |
| // (N = factored offset * data_align). |
| reg_num = extended_opcode; |
| op_offset = (int32_t)m_cfi_data.GetULEB128(&offset) * data_align; |
| reg_location.SetAtCFAPlusOffset(op_offset); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_restore : |
| { // 0xC0 - high 2 bits are 0x3, lower 6 bits are register |
| // takes a single argument that represents a register number. The |
| // required action is to change the rule for the indicated register |
| // to the rule assigned it by the initial_instructions in the CIE. |
| reg_num = extended_opcode; |
| // We only keep enough register locations around to |
| // unwind what is in our thread, and these are organized |
| // by the register index in that state, so we need to convert our |
| // GCC register number from the EH frame info, to a register index |
| |
| if (unwind_plan.IsValidRowIndex(0) && unwind_plan.GetRowAtIndex(0)->GetRegisterInfo(reg_num, reg_location)) |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| } |
| } |
| else |
| { |
| switch (extended_opcode) |
| { |
| case DW_CFA_nop : // 0x0 |
| break; |
| |
| case DW_CFA_set_loc : // 0x1 (Row Creation Instruction) |
| { |
| // DW_CFA_set_loc takes a single argument that represents an address. |
| // The required action is to create a new table row using the |
| // specified address as the location. All other values in the new row |
| // are initially identical to the current row. The new location value |
| // should always be greater than the current one. |
| unwind_plan.AppendRow(row); |
| UnwindPlan::Row *newrow = new UnwindPlan::Row; |
| *newrow = *row.get(); |
| row.reset (newrow); |
| row->SetOffset(m_cfi_data.GetPointer(&offset) - startaddr.GetFileAddress()); |
| } |
| break; |
| |
| case DW_CFA_advance_loc1 : // 0x2 (Row Creation Instruction) |
| { |
| // takes a single uword argument that represents a constant delta. |
| // This instruction is identical to DW_CFA_advance_loc except for the |
| // encoding and size of the delta argument. |
| unwind_plan.AppendRow(row); |
| UnwindPlan::Row *newrow = new UnwindPlan::Row; |
| *newrow = *row.get(); |
| row.reset (newrow); |
| row->SlideOffset (m_cfi_data.GetU8(&offset) * code_align); |
| } |
| break; |
| |
| case DW_CFA_advance_loc2 : // 0x3 (Row Creation Instruction) |
| { |
| // takes a single uword argument that represents a constant delta. |
| // This instruction is identical to DW_CFA_advance_loc except for the |
| // encoding and size of the delta argument. |
| unwind_plan.AppendRow(row); |
| UnwindPlan::Row *newrow = new UnwindPlan::Row; |
| *newrow = *row.get(); |
| row.reset (newrow); |
| row->SlideOffset (m_cfi_data.GetU16(&offset) * code_align); |
| } |
| break; |
| |
| case DW_CFA_advance_loc4 : // 0x4 (Row Creation Instruction) |
| { |
| // takes a single uword argument that represents a constant delta. |
| // This instruction is identical to DW_CFA_advance_loc except for the |
| // encoding and size of the delta argument. |
| unwind_plan.AppendRow(row); |
| UnwindPlan::Row *newrow = new UnwindPlan::Row; |
| *newrow = *row.get(); |
| row.reset (newrow); |
| row->SlideOffset (m_cfi_data.GetU32(&offset) * code_align); |
| } |
| break; |
| |
| case DW_CFA_offset_extended : // 0x5 |
| { |
| // takes two unsigned LEB128 arguments representing a register number |
| // and a factored offset. This instruction is identical to DW_CFA_offset |
| // except for the encoding and size of the register argument. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| op_offset = (int32_t)m_cfi_data.GetULEB128(&offset) * data_align; |
| reg_location.SetAtCFAPlusOffset(op_offset); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_restore_extended : // 0x6 |
| { |
| // takes a single unsigned LEB128 argument that represents a register |
| // number. This instruction is identical to DW_CFA_restore except for |
| // the encoding and size of the register argument. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| if (unwind_plan.IsValidRowIndex(0) && unwind_plan.GetRowAtIndex(0)->GetRegisterInfo(reg_num, reg_location)) |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_undefined : // 0x7 |
| { |
| // takes a single unsigned LEB128 argument that represents a register |
| // number. The required action is to set the rule for the specified |
| // register to undefined. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| reg_location.SetUndefined(); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_same_value : // 0x8 |
| { |
| // takes a single unsigned LEB128 argument that represents a register |
| // number. The required action is to set the rule for the specified |
| // register to same value. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| reg_location.SetSame(); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_register : // 0x9 |
| { |
| // takes two unsigned LEB128 arguments representing register numbers. |
| // The required action is to set the rule for the first register to be |
| // the second register. |
| |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| uint32_t other_reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| reg_location.SetInRegister(other_reg_num); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_remember_state : // 0xA |
| { |
| // These instructions define a stack of information. Encountering the |
| // DW_CFA_remember_state instruction means to save the rules for every |
| // register on the current row on the stack. Encountering the |
| // DW_CFA_restore_state instruction means to pop the set of rules off |
| // the stack and place them in the current row. (This operation is |
| // useful for compilers that move epilogue code into the body of a |
| // function.) |
| unwind_plan.AppendRow (row); |
| UnwindPlan::Row *newrow = new UnwindPlan::Row; |
| *newrow = *row.get(); |
| row.reset (newrow); |
| } |
| break; |
| |
| case DW_CFA_restore_state : // 0xB |
| // These instructions define a stack of information. Encountering the |
| // DW_CFA_remember_state instruction means to save the rules for every |
| // register on the current row on the stack. Encountering the |
| // DW_CFA_restore_state instruction means to pop the set of rules off |
| // the stack and place them in the current row. (This operation is |
| // useful for compilers that move epilogue code into the body of a |
| // function.) |
| { |
| row = unwind_plan.GetRowAtIndex(unwind_plan.GetRowCount() - 1); |
| } |
| break; |
| |
| case DW_CFA_def_cfa : // 0xC (CFA Definition Instruction) |
| { |
| // Takes two unsigned LEB128 operands representing a register |
| // number and a (non-factored) offset. The required action |
| // is to define the current CFA rule to use the provided |
| // register and offset. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| op_offset = (int32_t)m_cfi_data.GetULEB128(&offset); |
| row->SetCFARegister (reg_num); |
| row->SetCFAOffset (op_offset); |
| } |
| break; |
| |
| case DW_CFA_def_cfa_register : // 0xD (CFA Definition Instruction) |
| { |
| // takes a single unsigned LEB128 argument representing a register |
| // number. The required action is to define the current CFA rule to |
| // use the provided register (but to keep the old offset). |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| row->SetCFARegister (reg_num); |
| } |
| break; |
| |
| case DW_CFA_def_cfa_offset : // 0xE (CFA Definition Instruction) |
| { |
| // Takes a single unsigned LEB128 operand representing a |
| // (non-factored) offset. The required action is to define |
| // the current CFA rule to use the provided offset (but |
| // to keep the old register). |
| op_offset = (int32_t)m_cfi_data.GetULEB128(&offset); |
| row->SetCFAOffset (op_offset); |
| } |
| break; |
| |
| case DW_CFA_def_cfa_expression : // 0xF (CFA Definition Instruction) |
| { |
| size_t block_len = (size_t)m_cfi_data.GetULEB128(&offset); |
| offset += (uint32_t)block_len; |
| } |
| break; |
| |
| case DW_CFA_expression : // 0x10 |
| { |
| // Takes two operands: an unsigned LEB128 value representing |
| // a register number, and a DW_FORM_block value representing a DWARF |
| // expression. The required action is to change the rule for the |
| // register indicated by the register number to be an expression(E) |
| // rule where E is the DWARF expression. That is, the DWARF |
| // expression computes the address. The value of the CFA is |
| // pushed on the DWARF evaluation stack prior to execution of |
| // the DWARF expression. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| uint32_t block_len = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| const uint8_t *block_data = (uint8_t *)m_cfi_data.GetData(&offset, block_len); |
| |
| reg_location.SetAtDWARFExpression(block_data, block_len); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_offset_extended_sf : // 0x11 |
| { |
| // takes two operands: an unsigned LEB128 value representing a |
| // register number and a signed LEB128 factored offset. This |
| // instruction is identical to DW_CFA_offset_extended except |
| //that the second operand is signed and factored. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| op_offset = (int32_t)m_cfi_data.GetSLEB128(&offset) * data_align; |
| reg_location.SetAtCFAPlusOffset(op_offset); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_def_cfa_sf : // 0x12 (CFA Definition Instruction) |
| { |
| // Takes two operands: an unsigned LEB128 value representing |
| // a register number and a signed LEB128 factored offset. |
| // This instruction is identical to DW_CFA_def_cfa except |
| // that the second operand is signed and factored. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| op_offset = (int32_t)m_cfi_data.GetSLEB128(&offset) * data_align; |
| row->SetCFARegister (reg_num); |
| row->SetCFAOffset (op_offset); |
| } |
| break; |
| |
| case DW_CFA_def_cfa_offset_sf : // 0x13 (CFA Definition Instruction) |
| { |
| // takes a signed LEB128 operand representing a factored |
| // offset. This instruction is identical to DW_CFA_def_cfa_offset |
| // except that the operand is signed and factored. |
| op_offset = (int32_t)m_cfi_data.GetSLEB128(&offset) * data_align; |
| row->SetCFAOffset (op_offset); |
| } |
| break; |
| |
| case DW_CFA_val_expression : // 0x16 |
| { |
| // takes two operands: an unsigned LEB128 value representing a register |
| // number, and a DW_FORM_block value representing a DWARF expression. |
| // The required action is to change the rule for the register indicated |
| // by the register number to be a val_expression(E) rule where E is the |
| // DWARF expression. That is, the DWARF expression computes the value of |
| // the given register. The value of the CFA is pushed on the DWARF |
| // evaluation stack prior to execution of the DWARF expression. |
| reg_num = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| uint32_t block_len = (uint32_t)m_cfi_data.GetULEB128(&offset); |
| const uint8_t* block_data = (uint8_t*)m_cfi_data.GetData(&offset, block_len); |
| //#if defined(__i386__) || defined(__x86_64__) |
| // // The EH frame info for EIP and RIP contains code that looks for traps to |
| // // be a specific type and increments the PC. |
| // // For i386: |
| // // DW_CFA_val_expression where: |
| // // eip = DW_OP_breg6(+28), DW_OP_deref, DW_OP_dup, DW_OP_plus_uconst(0x34), |
| // // DW_OP_deref, DW_OP_swap, DW_OP_plus_uconst(0), DW_OP_deref, |
| // // DW_OP_dup, DW_OP_lit3, DW_OP_ne, DW_OP_swap, DW_OP_lit4, DW_OP_ne, |
| // // DW_OP_and, DW_OP_plus |
| // // This basically does a: |
| // // eip = ucontenxt.mcontext32->gpr.eip; |
| // // if (ucontenxt.mcontext32->exc.trapno != 3 && ucontenxt.mcontext32->exc.trapno != 4) |
| // // eip++; |
| // // |
| // // For x86_64: |
| // // DW_CFA_val_expression where: |
| // // rip = DW_OP_breg3(+48), DW_OP_deref, DW_OP_dup, DW_OP_plus_uconst(0x90), DW_OP_deref, |
| // // DW_OP_swap, DW_OP_plus_uconst(0), DW_OP_deref_size(4), DW_OP_dup, DW_OP_lit3, |
| // // DW_OP_ne, DW_OP_swap, DW_OP_lit4, DW_OP_ne, DW_OP_and, DW_OP_plus |
| // // This basically does a: |
| // // rip = ucontenxt.mcontext64->gpr.rip; |
| // // if (ucontenxt.mcontext64->exc.trapno != 3 && ucontenxt.mcontext64->exc.trapno != 4) |
| // // rip++; |
| // // The trap comparisons and increments are not needed as it hoses up the unwound PC which |
| // // is expected to point at least past the instruction that causes the fault/trap. So we |
| // // take it out by trimming the expression right at the first "DW_OP_swap" opcodes |
| // if (block_data != NULL && thread->GetPCRegNum(Thread::GCC) == reg_num) |
| // { |
| // if (thread->Is64Bit()) |
| // { |
| // if (block_len > 9 && block_data[8] == DW_OP_swap && block_data[9] == DW_OP_plus_uconst) |
| // block_len = 8; |
| // } |
| // else |
| // { |
| // if (block_len > 8 && block_data[7] == DW_OP_swap && block_data[8] == DW_OP_plus_uconst) |
| // block_len = 7; |
| // } |
| // } |
| //#endif |
| reg_location.SetIsDWARFExpression(block_data, block_len); |
| row->SetRegisterInfo (reg_num, reg_location); |
| } |
| break; |
| |
| case DW_CFA_val_offset : // 0x14 |
| case DW_CFA_val_offset_sf : // 0x15 |
| default: |
| break; |
| } |
| } |
| } |
| unwind_plan.AppendRow(row); |
| |
| return true; |
| } |