source/Target/StopInfo.cpp

//===-- StopInfo.cpp ---------------------------------------------*- C++ -*-===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//

#include "lldb/Target/StopInfo.h"

// C Includes
// C++ Includes
#include <string>

// Other libraries and framework includes
// Project includes
#include "lldb/Core/Log.h"
#include "lldb/Breakpoint/Breakpoint.h"
#include "lldb/Breakpoint/BreakpointLocation.h"
#include "lldb/Breakpoint/StoppointCallbackContext.h"
#include "lldb/Breakpoint/Watchpoint.h"
#include "lldb/Core/Debugger.h"
#include "lldb/Core/StreamString.h"
#include "lldb/Expression/ClangUserExpression.h"
#include "lldb/Target/Target.h"
#include "lldb/Target/Thread.h"
#include "lldb/Target/ThreadPlan.h"
#include "lldb/Target/Process.h"
#include "lldb/Target/UnixSignals.h"

using namespace lldb;
using namespace lldb_private;

StopInfo::StopInfo (Thread &thread, uint64_t value) :
    m_thread (thread),
    m_stop_id (thread.GetProcess()->GetStopID()),
    m_resume_id (thread.GetProcess()->GetResumeID()),
    m_value (value)
{
}

bool
StopInfo::IsValid () const
{
    return m_thread.GetProcess()->GetStopID() == m_stop_id;
}

void
StopInfo::MakeStopInfoValid ()
{
    m_stop_id = m_thread.GetProcess()->GetStopID();
    m_resume_id = m_thread.GetProcess()->GetResumeID();
}

bool
StopInfo::HasTargetRunSinceMe ()
{
    lldb::StateType ret_type = m_thread.GetProcess()->GetPrivateState();
    if (ret_type == eStateRunning)
    {
        return true;
    }
    else if (ret_type == eStateStopped)
    {
        // This is a little tricky.  We want to count "run and stopped again before you could
        // ask this question as a "TRUE" answer to HasTargetRunSinceMe.  But we don't want to 
        // include any running of the target done for expressions.  So we track both resumes,
        // and resumes caused by expressions, and check if there are any resumes NOT caused
        // by expressions.
        
        uint32_t curr_resume_id = m_thread.GetProcess()->GetResumeID();
        uint32_t last_user_expression_id = m_thread.GetProcess()->GetLastUserExpressionResumeID ();
        if (curr_resume_id == m_resume_id)
        {
            return false;
        }
        else if (curr_resume_id > last_user_expression_id)
        {
            return true;
        }
    }
    return false;
}

//----------------------------------------------------------------------
// StopInfoBreakpoint
//----------------------------------------------------------------------

namespace lldb_private
{
class StopInfoBreakpoint : public StopInfo
{
public:

    StopInfoBreakpoint (Thread &thread, break_id_t break_id) :
        StopInfo (thread, break_id),
        m_description(),
        m_should_stop (false),
        m_should_stop_is_valid (false),
        m_should_perform_action (true),
        m_address (LLDB_INVALID_ADDRESS)
    {
        BreakpointSiteSP bp_site_sp (m_thread.GetProcess()->GetBreakpointSiteList().FindByID (m_value));
        if (bp_site_sp)
        {
          m_address = bp_site_sp->GetLoadAddress();
        }
    }
    
    StopInfoBreakpoint (Thread &thread, break_id_t break_id, bool should_stop) :
        StopInfo (thread, break_id),
        m_description(),
        m_should_stop (should_stop),
        m_should_stop_is_valid (true),
        m_should_perform_action (true),
        m_address (LLDB_INVALID_ADDRESS)
    {
        BreakpointSiteSP bp_site_sp (m_thread.GetProcess()->GetBreakpointSiteList().FindByID (m_value));
        if (bp_site_sp)
        {
          m_address = bp_site_sp->GetLoadAddress();
        }
    }

    virtual ~StopInfoBreakpoint ()
    {
    }
    
    virtual StopReason
    GetStopReason () const
    {
        return eStopReasonBreakpoint;
    }

    virtual bool
    ShouldStopSynchronous (Event *event_ptr)
    {
        if (!m_should_stop_is_valid)
        {
            // Only check once if we should stop at a breakpoint
            BreakpointSiteSP bp_site_sp (m_thread.GetProcess()->GetBreakpointSiteList().FindByID (m_value));
            if (bp_site_sp)
            {
                ExecutionContext exe_ctx (m_thread.GetStackFrameAtIndex(0));
                StoppointCallbackContext context (event_ptr, exe_ctx, true);
                m_should_stop = bp_site_sp->ShouldStop (&context);
            }
            else
            {
                LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

                if (log)
                    log->Printf ("Process::%s could not find breakpoint site id: %lld...", __FUNCTION__, m_value);

                m_should_stop = true;
            }
            m_should_stop_is_valid = true;
        }
        return m_should_stop;
    }
    
    bool
    ShouldStop (Event *event_ptr)
    {
        // This just reports the work done by PerformAction or the synchronous stop.  It should
        // only ever get called after they have had a chance to run.
        assert (m_should_stop_is_valid);
        return m_should_stop;
    }
    
    virtual void
    PerformAction (Event *event_ptr)
    {
        if (!m_should_perform_action)
            return;
        m_should_perform_action = false;
        
        LogSP log = lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_BREAKPOINTS);
        
        BreakpointSiteSP bp_site_sp (m_thread.GetProcess()->GetBreakpointSiteList().FindByID (m_value));
        
        if (bp_site_sp)
        {
            size_t num_owners = bp_site_sp->GetNumberOfOwners();
                
            if (num_owners == 0)
            {
                m_should_stop = true;
            }
            else
            {
                // We go through each location, and test first its condition.  If the condition says to stop,
                // then we run the callback for that location.  If that callback says to stop as well, then 
                // we set m_should_stop to true; we are going to stop.
                // But we still want to give all the breakpoints whose conditions say we are going to stop a
                // chance to run their callbacks.
                // Of course if any callback restarts the target by putting "continue" in the callback, then 
                // we're going to restart, without running the rest of the callbacks.  And in this case we will
                // end up not stopping even if another location said we should stop.  But that's better than not
                // running all the callbacks.
                
                m_should_stop = false;

                ExecutionContext exe_ctx (m_thread.GetStackFrameAtIndex(0));
                StoppointCallbackContext context (event_ptr, exe_ctx, false);

                for (size_t j = 0; j < num_owners; j++)
                {
                    lldb::BreakpointLocationSP bp_loc_sp = bp_site_sp->GetOwnerAtIndex(j);
                                                      
                    // First run the condition for the breakpoint.  If that says we should stop, then we'll run
                    // the callback for the breakpoint.  If the callback says we shouldn't stop that will win.
                    
                    bool condition_says_stop = true;
                    if (bp_loc_sp->GetConditionText() != NULL)
                    {
                        // We need to make sure the user sees any parse errors in their condition, so we'll hook the
                        // constructor errors up to the debugger's Async I/O.
                        
                        ValueObjectSP result_valobj_sp;
                        
                        ExecutionResults result_code;
                        ValueObjectSP result_value_sp;
                        const bool discard_on_error = true;
                        Error error;
                        result_code = ClangUserExpression::EvaluateWithError (exe_ctx,
                                                                              eExecutionPolicyOnlyWhenNeeded,
                                                                              lldb::eLanguageTypeUnknown,
                                                                              ClangUserExpression::eResultTypeAny,
                                                                              discard_on_error,
                                                                              bp_loc_sp->GetConditionText(),
                                                                              NULL,
                                                                              result_value_sp,
                                                                              error);
                        if (result_code == eExecutionCompleted)
                        {
                            if (result_value_sp)
                            {
                                Scalar scalar_value;
                                if (result_value_sp->ResolveValue (scalar_value))
                                {
                                    if (scalar_value.ULongLong(1) == 0)
                                        condition_says_stop = false;
                                    else
                                        condition_says_stop = true;
                                    if (log)
                                        log->Printf("Condition successfully evaluated, result is %s.\n", 
                                                    m_should_stop ? "true" : "false");
                                }
                                else
                                {
                                    condition_says_stop = true;
                                    if (log)
                                        log->Printf("Failed to get an integer result from the expression.");
                                }
                            }
                        }
                        else
                        {
                            Debugger &debugger = exe_ctx.GetTargetRef().GetDebugger();
                            StreamSP error_sp = debugger.GetAsyncErrorStream ();
                            error_sp->Printf ("Stopped due to an error evaluating condition of breakpoint ");
                            bp_loc_sp->GetDescription (error_sp.get(), eDescriptionLevelBrief);
                            error_sp->Printf (": \"%s\"", 
                                              bp_loc_sp->GetConditionText());
                            error_sp->EOL();
                            const char *err_str = error.AsCString("<Unknown Error>");
                            if (log)
                                log->Printf("Error evaluating condition: \"%s\"\n", err_str);
                            
                            error_sp->PutCString (err_str);
                            error_sp->EOL();                       
                            error_sp->Flush();
                            // If the condition fails to be parsed or run, we should stop.
                            condition_says_stop = true;
                        }
                    }
                                            
                    // If this location's condition says we should aren't going to stop, 
                    // then don't run the callback for this location.
                    if (!condition_says_stop)
                        continue;
                                
                    bool callback_says_stop;
                    
                    // FIXME: For now the callbacks have to run in async mode - the first time we restart we need
                    // to get out of there.  So set it here.
                    // When we figure out how to nest breakpoint hits then this will change.
                    
                    Debugger &debugger = m_thread.CalculateTarget()->GetDebugger();
                    bool old_async = debugger.GetAsyncExecution();
                    debugger.SetAsyncExecution (true);
                    
                    callback_says_stop = bp_loc_sp->InvokeCallback (&context);
                    
                    debugger.SetAsyncExecution (old_async);
                    
                    if (callback_says_stop)
                        m_should_stop = true;
                        
                    // Also make sure that the callback hasn't continued the target.  
                    // If it did, when we'll set m_should_start to false and get out of here.
                    if (HasTargetRunSinceMe ())
                    {
                        m_should_stop = false;
                        break;
                    }
                }
            }
            // We've figured out what this stop wants to do, so mark it as valid so we don't compute it again.
            m_should_stop_is_valid = true;

        }
        else
        {
            m_should_stop = true;
            m_should_stop_is_valid = true;
            LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

            if (log)
                log->Printf ("Process::%s could not find breakpoint site id: %lld...", __FUNCTION__, m_value);
        }
        if (log)
            log->Printf ("Process::%s returning from action with m_should_stop: %d.", __FUNCTION__, m_should_stop);
    }
        
    virtual bool
    ShouldNotify (Event *event_ptr)
    {
        BreakpointSiteSP bp_site_sp (m_thread.GetProcess()->GetBreakpointSiteList().FindByID (m_value));
        if (bp_site_sp)
        {
            bool all_internal = true;

            for (uint32_t i = 0; i < bp_site_sp->GetNumberOfOwners(); i++)
            {
                if (!bp_site_sp->GetOwnerAtIndex(i)->GetBreakpoint().IsInternal())
                {
                    all_internal = false;
                    break;
                }
            }
            return all_internal == false;
        }
        return true;
    }

    virtual const char *
    GetDescription ()
    {
        if (m_description.empty())
        {
            BreakpointSiteSP bp_site_sp (m_thread.GetProcess()->GetBreakpointSiteList().FindByID (m_value));
            if (bp_site_sp)
            {
                StreamString strm;
                strm.Printf("breakpoint ");
                bp_site_sp->GetDescription(&strm, eDescriptionLevelBrief);
                m_description.swap (strm.GetString());
            }
            else
            {
                StreamString strm;
                if (m_address == LLDB_INVALID_ADDRESS)
                    strm.Printf("breakpoint site %lli which has been deleted - unknown address", m_value);
                else
                    strm.Printf("breakpoint site %lli which has been deleted - was at 0x%llx", m_value, m_address);
                m_description.swap (strm.GetString());
            }
        }
        return m_description.c_str();
    }

private:
    std::string m_description;
    bool m_should_stop;
    bool m_should_stop_is_valid;
    bool m_should_perform_action; // Since we are trying to preserve the "state" of the system even if we run functions
                                  // etc. behind the users backs, we need to make sure we only REALLY perform the action once.
    lldb::addr_t m_address;       // We use this to capture the breakpoint site address when we create the StopInfo,
                                  // in case somebody deletes it between the time the StopInfo is made and the
                                  // description is asked for.
};


//----------------------------------------------------------------------
// StopInfoWatchpoint
//----------------------------------------------------------------------

class StopInfoWatchpoint : public StopInfo
{
public:

    StopInfoWatchpoint (Thread &thread, break_id_t watch_id) :
        StopInfo(thread, watch_id),
        m_description(),
        m_should_stop(false),
        m_should_stop_is_valid(false)
    {
    }
    
    virtual ~StopInfoWatchpoint ()
    {
    }

    virtual StopReason
    GetStopReason () const
    {
        return eStopReasonWatchpoint;
    }

    virtual bool
    ShouldStop (Event *event_ptr)
    {
        // ShouldStop() method is idempotent and should not affect hit count.
        // See Process::RunPrivateStateThread()->Process()->HandlePrivateEvent()
        // -->Process()::ShouldBroadcastEvent()->ThreadList::ShouldStop()->
        // Thread::ShouldStop()->ThreadPlanBase::ShouldStop()->
        // StopInfoWatchpoint::ShouldStop() and
        // Event::DoOnRemoval()->Process::ProcessEventData::DoOnRemoval()->
        // StopInfoWatchpoint::PerformAction().
        if (m_should_stop_is_valid)
            return m_should_stop;

        WatchpointSP wp_sp =
            m_thread.CalculateTarget()->GetWatchpointList().FindByID(GetValue());
        if (wp_sp)
        {
            // Check if we should stop at a watchpoint.
            ExecutionContext exe_ctx (m_thread.GetStackFrameAtIndex(0));
            StoppointCallbackContext context (event_ptr, exe_ctx, true);
            m_should_stop = wp_sp->ShouldStop (&context);
        }
        else
        {
            LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

            if (log)
                log->Printf ("Process::%s could not find watchpoint location id: %lld...",
                             __FUNCTION__, GetValue());

            m_should_stop = true;
        }
        m_should_stop_is_valid = true;
        return m_should_stop;
    }
    
    // Perform any action that is associated with this stop.  This is done as the
    // Event is removed from the event queue.
    virtual void
    PerformAction (Event *event_ptr)
    {
        LogSP log = lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_WATCHPOINTS);
        // We're going to calculate if we should stop or not in some way during the course of
        // this code.  Also by default we're going to stop, so set that here.
        m_should_stop = true;
        
        WatchpointSP wp_sp =
            m_thread.CalculateTarget()->GetWatchpointList().FindByID(GetValue());
        if (wp_sp)
        {
            ExecutionContext exe_ctx (m_thread.GetStackFrameAtIndex(0));
            Process* process = exe_ctx.GetProcessPtr();
            {
                // check if this process is running on an architecture where watchpoints trigger
				// before the associated instruction runs. if so, disable the WP, single-step and then
				// re-enable the watchpoint
                if (process)
                {
                    uint32_t num; bool wp_triggers_after;
                    if (process->GetWatchpointSupportInfo(num, wp_triggers_after).Success())
                    {
                        if (!wp_triggers_after)
                        {
                            process->DisableWatchpoint(wp_sp.get());
                            
                            ThreadPlan *new_plan = m_thread.QueueThreadPlanForStepSingleInstruction(false, // step-over
                                                                                                    false, // abort_other_plans
                                                                                                    true); // stop_other_threads
                            new_plan->SetIsMasterPlan (true);
                            new_plan->SetOkayToDiscard (false);
                            process->GetThreadList().SetSelectedThreadByID (m_thread.GetID());
                            process->Resume ();
                            process->WaitForProcessToStop (NULL);
                            process->GetThreadList().SetSelectedThreadByID (m_thread.GetID());
                            MakeStopInfoValid(); // make sure we do not fail to stop because of the single-step taken above
                            
                            process->EnableWatchpoint(wp_sp.get());
                        }
                    }
                }
            }

            // Record the snapshot of our watchpoint.
            VariableSP var_sp;
            ValueObjectSP valobj_sp;        
            StackFrame *frame = exe_ctx.GetFramePtr();
            if (frame)
            {
                bool snapshot_taken = true;
                if (!wp_sp->IsWatchVariable())
                {
                    // We are not watching a variable, just read from the process memory for the watched location.
                    assert (process);
                    Error error;
                    uint64_t val = process->ReadUnsignedIntegerFromMemory(wp_sp->GetLoadAddress(),
                                                                          wp_sp->GetByteSize(),
                                                                          0,
                                                                          error);
                    if (log)
                    {
                        if (error.Success())
                            log->Printf("Watchpoint snapshot val taken: 0x%llx\n", val);
                        else
                            log->Printf("Watchpoint snapshot val taking failed.\n");
                    }                        
                    wp_sp->SetNewSnapshotVal(val);
                }
                else if (!wp_sp->GetWatchSpec().empty())
                {
                    // Use our frame to evaluate the variable expression.
                    Error error;
                    uint32_t expr_path_options = StackFrame::eExpressionPathOptionCheckPtrVsMember |
                                                 StackFrame::eExpressionPathOptionsAllowDirectIVarAccess;
                    valobj_sp = frame->GetValueForVariableExpressionPath (wp_sp->GetWatchSpec().c_str(), 
                                                                          eNoDynamicValues, 
                                                                          expr_path_options,
                                                                          var_sp,
                                                                          error);
                    if (valobj_sp)
                    {
                        // We're in business.
                        StreamString ss;
                        ValueObject::DumpValueObject(ss, valobj_sp.get());
                        wp_sp->SetNewSnapshot(ss.GetString());
                    }
                    else
                    {
                        // The variable expression has become out of scope?
                        // Let us forget about this stop info.
                        if (log)
                            log->Printf("Snapshot attempt failed.  Variable expression has become out of scope?");
                        snapshot_taken = false;
                        m_should_stop = false;
                        wp_sp->IncrementFalseAlarmsAndReviseHitCount();
                    }

                    if (log && snapshot_taken)
                        log->Printf("Watchpoint snapshot taken: '%s'\n", wp_sp->GetNewSnapshot().c_str());
                }

                // Now dump the snapshots we have taken.
                if (snapshot_taken)
                {
                    Debugger &debugger = exe_ctx.GetTargetRef().GetDebugger();
                    StreamSP output_sp = debugger.GetAsyncOutputStream ();
                    wp_sp->DumpSnapshots(output_sp.get());
                    output_sp->EOL();
                    output_sp->Flush();
                }
            }

            if (m_should_stop && wp_sp->GetConditionText() != NULL)
            {
                // We need to make sure the user sees any parse errors in their condition, so we'll hook the
                // constructor errors up to the debugger's Async I/O.
                ExecutionResults result_code;
                ValueObjectSP result_value_sp;
                const bool discard_on_error = true;
                Error error;
                result_code = ClangUserExpression::EvaluateWithError (exe_ctx,
                                                                      eExecutionPolicyAlways,
                                                                      lldb::eLanguageTypeUnknown,
                                                                      ClangUserExpression::eResultTypeAny,
                                                                      discard_on_error,
                                                                      wp_sp->GetConditionText(),
                                                                      NULL,
                                                                      result_value_sp,
                                                                      error,
                                                                      500000);
                if (result_code == eExecutionCompleted)
                {
                    if (result_value_sp)
                    {
                        Scalar scalar_value;
                        if (result_value_sp->ResolveValue (scalar_value))
                        {
                            if (scalar_value.ULongLong(1) == 0)
                            {
                                // We have been vetoed.  This takes precedence over querying
                                // the watchpoint whether it should stop (aka ignore count and
                                // friends).  See also StopInfoWatchpoint::ShouldStop() as well
                                // as Process::ProcessEventData::DoOnRemoval().
                                m_should_stop = false;
                            }
                            else
                                m_should_stop = true;
                            if (log)
                                log->Printf("Condition successfully evaluated, result is %s.\n", 
                                            m_should_stop ? "true" : "false");
                        }
                        else
                        {
                            m_should_stop = true;
                            if (log)
                                log->Printf("Failed to get an integer result from the expression.");
                        }
                    }
                }
                else
                {
                    Debugger &debugger = exe_ctx.GetTargetRef().GetDebugger();
                    StreamSP error_sp = debugger.GetAsyncErrorStream ();
                    error_sp->Printf ("Stopped due to an error evaluating condition of watchpoint ");
                    wp_sp->GetDescription (error_sp.get(), eDescriptionLevelBrief);
                    error_sp->Printf (": \"%s\"", 
                                      wp_sp->GetConditionText());
                    error_sp->EOL();
                    const char *err_str = error.AsCString("<Unknown Error>");
                    if (log)
                        log->Printf("Error evaluating condition: \"%s\"\n", err_str);

                    error_sp->PutCString (err_str);
                    error_sp->EOL();                       
                    error_sp->Flush();
                    // If the condition fails to be parsed or run, we should stop.
                    m_should_stop = true;
                }
            }

            // If the condition says to stop, we run the callback to further decide whether to stop.
            if (m_should_stop)
            {
                StoppointCallbackContext context (event_ptr, exe_ctx, false);
                bool stop_requested = wp_sp->InvokeCallback (&context);
                // Also make sure that the callback hasn't continued the target.  
                // If it did, when we'll set m_should_stop to false and get out of here.
                if (HasTargetRunSinceMe ())
                    m_should_stop = false;
                
                if (m_should_stop && !stop_requested)
                {
                    // We have been vetoed by the callback mechanism.
                    m_should_stop = false;
                }
            }
        }
        else
        {
            LogSP log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

            if (log)
                log->Printf ("Process::%s could not find watchpoint id: %lld...", __FUNCTION__, m_value);
        }
        if (log)
            log->Printf ("Process::%s returning from action with m_should_stop: %d.", __FUNCTION__, m_should_stop);
    }
        
    virtual const char *
    GetDescription ()
    {
        if (m_description.empty())
        {
            StreamString strm;
            strm.Printf("watchpoint %lli", m_value);
            m_description.swap (strm.GetString());
        }
        return m_description.c_str();
    }

private:
    std::string m_description;
    bool m_should_stop;
    bool m_should_stop_is_valid;
};



//----------------------------------------------------------------------
// StopInfoUnixSignal
//----------------------------------------------------------------------

class StopInfoUnixSignal : public StopInfo
{
public:

    StopInfoUnixSignal (Thread &thread, int signo) :
        StopInfo (thread, signo)
    {
    }
    
    virtual ~StopInfoUnixSignal ()
    {
    }


    virtual StopReason
    GetStopReason () const
    {
        return eStopReasonSignal;
    }

    virtual bool
    ShouldStop (Event *event_ptr)
    {
        return m_thread.GetProcess()->GetUnixSignals().GetShouldStop (m_value);
    }
    
    
    // If should stop returns false, check if we should notify of this event
    virtual bool
    ShouldNotify (Event *event_ptr)
    {
        return m_thread.GetProcess()->GetUnixSignals().GetShouldNotify (m_value);
    }

    
    virtual void
    WillResume (lldb::StateType resume_state)
    {
        if (m_thread.GetProcess()->GetUnixSignals().GetShouldSuppress(m_value) == false)
            m_thread.SetResumeSignal(m_value);
    }

    virtual const char *
    GetDescription ()
    {
        if (m_description.empty())
        {
            StreamString strm;
            const char *signal_name = m_thread.GetProcess()->GetUnixSignals().GetSignalAsCString (m_value);
            if (signal_name)
                strm.Printf("signal %s", signal_name);
            else
                strm.Printf("signal %lli", m_value);
            m_description.swap (strm.GetString());
        }
        return m_description.c_str();
    }
};

//----------------------------------------------------------------------
// StopInfoTrace
//----------------------------------------------------------------------

class StopInfoTrace : public StopInfo
{
public:

    StopInfoTrace (Thread &thread) :
        StopInfo (thread, LLDB_INVALID_UID)
    {
    }
    
    virtual ~StopInfoTrace ()
    {
    }
    
    virtual StopReason
    GetStopReason () const
    {
        return eStopReasonTrace;
    }

    virtual const char *
    GetDescription ()
    {
        if (m_description.empty())
        return "trace";
        else
            return m_description.c_str();
    }
};


//----------------------------------------------------------------------
// StopInfoException
//----------------------------------------------------------------------

class StopInfoException : public StopInfo
{
public:
    
    StopInfoException (Thread &thread, const char *description) :
        StopInfo (thread, LLDB_INVALID_UID)
    {
        if (description)
            SetDescription (description);
    }
    
    virtual 
    ~StopInfoException ()
    {
    }
    
    virtual StopReason
    GetStopReason () const
    {
        return eStopReasonException;
    }
    
    virtual const char *
    GetDescription ()
    {
        if (m_description.empty())
            return "exception";
        else
            return m_description.c_str();
    }
};


//----------------------------------------------------------------------
// StopInfoThreadPlan
//----------------------------------------------------------------------

class StopInfoThreadPlan : public StopInfo
{
public:

    StopInfoThreadPlan (ThreadPlanSP &plan_sp, ValueObjectSP &return_valobj_sp) :
        StopInfo (plan_sp->GetThread(), LLDB_INVALID_UID),
        m_plan_sp (plan_sp),
        m_return_valobj_sp (return_valobj_sp)
    {
    }
    
    virtual ~StopInfoThreadPlan ()
    {
    }

    virtual StopReason
    GetStopReason () const
    {
        return eStopReasonPlanComplete;
    }

    virtual const char *
    GetDescription ()
    {
        if (m_description.empty())
        {
            StreamString strm;            
            m_plan_sp->GetDescription (&strm, eDescriptionLevelBrief);
            m_description.swap (strm.GetString());
        }
        return m_description.c_str();
    }
    
    ValueObjectSP
    GetReturnValueObject()
    {
        return m_return_valobj_sp;
    }

private:
    ThreadPlanSP m_plan_sp;
    ValueObjectSP m_return_valobj_sp;
};
} // namespace lldb_private

StopInfoSP
StopInfo::CreateStopReasonWithBreakpointSiteID (Thread &thread, break_id_t break_id)
{
    return StopInfoSP (new StopInfoBreakpoint (thread, break_id));
}

StopInfoSP
StopInfo::CreateStopReasonWithBreakpointSiteID (Thread &thread, break_id_t break_id, bool should_stop)
{
    return StopInfoSP (new StopInfoBreakpoint (thread, break_id, should_stop));
}

StopInfoSP
StopInfo::CreateStopReasonWithWatchpointID (Thread &thread, break_id_t watch_id)
{
    return StopInfoSP (new StopInfoWatchpoint (thread, watch_id));
}

StopInfoSP
StopInfo::CreateStopReasonWithSignal (Thread &thread, int signo)
{
    return StopInfoSP (new StopInfoUnixSignal (thread, signo));
}

StopInfoSP
StopInfo::CreateStopReasonToTrace (Thread &thread)
{
    return StopInfoSP (new StopInfoTrace (thread));
}

StopInfoSP
StopInfo::CreateStopReasonWithPlan (ThreadPlanSP &plan_sp, ValueObjectSP return_valobj_sp)
{
    return StopInfoSP (new StopInfoThreadPlan (plan_sp, return_valobj_sp));
}

StopInfoSP
StopInfo::CreateStopReasonWithException (Thread &thread, const char *description)
{
    return StopInfoSP (new StopInfoException (thread, description));
}

ValueObjectSP
StopInfo::GetReturnValueObject(StopInfoSP &stop_info_sp)
{
    if (stop_info_sp && stop_info_sp->GetStopReason() == eStopReasonPlanComplete)
    {
        StopInfoThreadPlan *plan_stop_info = static_cast<StopInfoThreadPlan *>(stop_info_sp.get());
        return plan_stop_info->GetReturnValueObject();
    }
    else
        return ValueObjectSP();
}