| #===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# |
| # |
| # The LLVM Compiler Infrastructure |
| # |
| # This file is distributed under the University of Illinois Open Source |
| # License. See LICENSE.TXT for details. |
| # |
| #===------------------------------------------------------------------------===# |
| # |
| # This file is included by Makefile.common. It defines paths and other |
| # values specific to a particular installation of LLVM. |
| # |
| #===------------------------------------------------------------------------===# |
| |
| # Define LLVM specific info and directories based on the autoconf variables |
| LLVMPackageName := @PACKAGE_NAME@ |
| LLVMVersion := @PACKAGE_VERSION@ |
| LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ |
| |
| ########################################################################### |
| # Directory Configuration |
| # This section of the Makefile determines what is where. To be |
| # specific, there are several locations that need to be defined: |
| # |
| # o LLVM_SRC_ROOT : The root directory of the LLVM source code. |
| # o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. |
| # |
| # o PROJ_SRC_DIR : The directory containing the code to build. |
| # o PROJ_SRC_ROOT : The root directory of the code to build. |
| # |
| # o PROJ_OBJ_DIR : The directory in which compiled code will be placed. |
| # o PROJ_OBJ_ROOT : The root directory in which compiled code is placed. |
| # |
| ########################################################################### |
| |
| PWD := @BINPWD@ |
| # Set the project name to LLVM if its not defined |
| ifndef PROJECT_NAME |
| PROJECT_NAME := $(LLVMPackageName) |
| endif |
| |
| PROJ_OBJ_DIR := $(shell $(PWD)) |
| PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD)) |
| |
| ifeq ($(PROJECT_NAME),llvm) |
| LLVM_SRC_ROOT := $(shell cd @abs_top_srcdir@; $(PWD)) |
| LLVM_OBJ_ROOT := $(shell cd @abs_top_builddir@; $(PWD)) |
| PROJ_SRC_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(PWD)) |
| PROJ_SRC_DIR := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) |
| prefix := @prefix@ |
| PROJ_prefix := $(prefix) |
| PROJ_VERSION := $(LLVMVersion) |
| else |
| ifndef PROJ_SRC_ROOT |
| $(error Projects must define PROJ_SRC_ROOT) |
| endif |
| ifndef PROJ_OBJ_ROOT |
| $(error Projects must define PROJ_OBJ_ROOT) |
| endif |
| ifndef PROJ_INSTALL_ROOT |
| $(error Projects must define PROJ_INSTALL_ROOT) |
| endif |
| ifndef LLVM_SRC_ROOT |
| $(error Projects must define LLVM_SRC_ROOT) |
| endif |
| ifndef LLVM_OBJ_ROOT |
| $(error Projects must define LLVM_OBJ_ROOT) |
| endif |
| PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) |
| prefix := $(PROJ_INSTALL_ROOT) |
| PROJ_prefix := $(prefix) |
| ifndef PROJ_VERSION |
| PROJ_VERSION := 1.0 |
| endif |
| endif |
| |
| LLVMMAKE := $(LLVM_SRC_ROOT)/make |
| |
| PROJ_bindir := $(PROJ_prefix)/bin |
| PROJ_libdir := $(PROJ_prefix)/lib |
| PROJ_datadir := $(PROJ_prefix)/share |
| PROJ_docsdir := $(PROJ_prefix)/docs/llvm |
| PROJ_etcdir := $(PROJ_prefix)/etc/llvm |
| PROJ_includedir := $(PROJ_prefix)/include |
| PROJ_infodir := $(PROJ_prefix)/info |
| PROJ_mandir := $(PROJ_prefix)/share/man |
| |
| # Determine if we're on a unix type operating system |
| LLVM_ON_UNIX:=@LLVM_ON_UNIX@ |
| LLVM_ON_WIN32:=@LLVM_ON_WIN32@ |
| |
| # Host operating system for which LLVM will be run. |
| OS=@OS@ |
| HOST_OS=@HOST_OS@ |
| # Target operating system for which LLVM will compile for. |
| TARGET_OS=@TARGET_OS@ |
| |
| # Target hardware architecture |
| ARCH=@ARCH@ |
| |
| # Indicates, whether we're cross-compiling LLVM or not |
| LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@ |
| |
| # Executable file extension for build platform (mainly for |
| # tablegen call if we're cross-compiling). |
| BUILD_EXEEXT=@BUILD_EXEEXT@ |
| |
| # Compilers for the build platflorm (mainly for tablegen |
| # call if we're cross-compiling). |
| BUILD_CC=@BUILD_CC@ |
| BUILD_CXX=@BUILD_CXX@ |
| |
| # Triple for configuring build tools when cross-compiling |
| BUILD_TRIPLE=@build@ |
| |
| # Target triple (cpu-vendor-os) for which we should generate code |
| TARGET_TRIPLE=@target@ |
| |
| # Extra options to compile LLVM with |
| EXTRA_OPTIONS=@EXTRA_OPTIONS@ |
| |
| # Endian-ness of the target |
| ENDIAN=@ENDIAN@ |
| |
| # Path to the C++ compiler to use. This is an optional setting, which defaults |
| # to whatever your gmake defaults to. |
| CXX = @CXX@ |
| |
| # Path to the CC binary, which use used by testcases for native builds. |
| CC := @CC@ |
| |
| # Linker flags. |
| LDFLAGS+=@LDFLAGS@ |
| |
| # Path to the library archiver program. |
| AR_PATH = @AR@ |
| AR = @AR@ |
| |
| # Path to the nm program |
| NM_PATH = @NM@ |
| |
| # The pathnames of the programs we require to build |
| CMP := @CMP@ |
| CP := @CP@ |
| DATE := @DATE@ |
| FIND := @FIND@ |
| GREP := @GREP@ |
| INSTALL := @INSTALL@ |
| MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs |
| MV := @MV@ |
| RANLIB := @RANLIB@ |
| RM := @RM@ |
| SED := @SED@ |
| TAR := @TAR@ |
| |
| # Paths to miscellaneous programs we hope are present but might not be |
| PERL := @PERL@ |
| BZIP2 := @BZIP2@ |
| DOT := @DOT@ |
| DOXYGEN := @DOXYGEN@ |
| GROFF := @GROFF@ |
| GZIP := @GZIP@ |
| OCAMLC := @OCAMLC@ |
| OCAMLOPT := @OCAMLOPT@ |
| OCAMLDEP := @OCAMLDEP@ |
| OCAMLDOC := @OCAMLDOC@ |
| GAS := @GAS@ |
| POD2HTML := @POD2HTML@ |
| POD2MAN := @POD2MAN@ |
| RUNTEST := @RUNTEST@ |
| TCLSH := @TCLSH@ |
| ZIP := @ZIP@ |
| |
| HAVE_PERL := @HAVE_PERL@ |
| HAVE_PTHREAD := @HAVE_PTHREAD@ |
| |
| LIBS := @LIBS@ |
| |
| # Targets that we should build |
| TARGETS_TO_BUILD=@TARGETS_TO_BUILD@ |
| |
| # Path to location for LLVM C/C++ front-end. You can modify this if you |
| # want to override the value set by configure. |
| LLVMGCCDIR := @LLVMGCCDIR@ |
| |
| # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries: |
| LLVMGCC := @LLVMGCC@ |
| LLVMGXX := @LLVMGXX@ |
| LLVMCC1 := @LLVMCC1@ |
| LLVMCC1PLUS := @LLVMCC1PLUS@ |
| LLVMGCC_LANGS := @LLVMGCC_LANGS@ |
| |
| # Information on Clang, if configured. |
| CLANGPATH := @CLANGPATH@ |
| CLANGXXPATH := @CLANGXXPATH@ |
| ENABLE_BUILT_CLANG := @ENABLE_BUILT_CLANG@ |
| |
| # The LLVM capable compiler to use. |
| LLVMCC_OPTION := @LLVMCC_OPTION@ |
| |
| # Path to directory where object files should be stored during a build. |
| # Set OBJ_ROOT to "." if you do not want to use a separate place for |
| # object files. |
| OBJ_ROOT := . |
| |
| # What to pass as rpath flag to g++ |
| RPATH := @RPATH@ |
| |
| # What to pass as -rdynamic flag to g++ |
| RDYNAMIC := @RDYNAMIC@ |
| |
| # These are options that can either be enabled here, or can be enabled on the |
| # make command line (ie, make ENABLE_PROFILING=1): |
| |
| # When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put |
| # into the "Release" directories. Otherwise, LLVM code is not optimized and |
| # output is put in the "Debug" directories. |
| #ENABLE_OPTIMIZED = 1 |
| @ENABLE_OPTIMIZED@ |
| |
| # When ENABLE_PROFILING is enabled, profile instrumentation is done |
| # and output is put into the "<Flavor>+Profile" directories, where |
| # <Flavor> is either Debug or Release depending on how other builkd |
| # flags are set.. Otherwise, output is put in the <Flavor> |
| # directories. |
| #ENABLE_PROFILING = 1 |
| @ENABLE_PROFILING@ |
| |
| # When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will |
| # exclude assertion checks, otherwise they are included. |
| #DISABLE_ASSERTIONS = 1 |
| @DISABLE_ASSERTIONS@ |
| |
| # When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM |
| # code will include expensive checks, otherwise they are excluded. |
| #ENABLE_EXPENSIVE_CHECKS = 0 |
| @ENABLE_EXPENSIVE_CHECKS@ |
| |
| # When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug |
| # symbols. |
| #DEBUG_RUNTIME = 1 |
| @DEBUG_RUNTIME@ |
| |
| # When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug |
| # symbols. |
| #DEBUG_SYMBOLS = 1 |
| @DEBUG_SYMBOLS@ |
| |
| # The compiler flags to use for optimized builds. |
| OPTIMIZE_OPTION := @OPTIMIZE_OPTION@ |
| |
| # When ENABLE_PROFILING is enabled, the llvm source base is built with profile |
| # information to allow gprof to be used to get execution frequencies. |
| #ENABLE_PROFILING = 1 |
| |
| # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built |
| ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ |
| |
| # Do we want to enable threads? |
| ENABLE_THREADS := @ENABLE_THREADS@ |
| |
| # Do we want to build with position independent code? |
| ENABLE_PIC := @ENABLE_PIC@ |
| |
| # Do we want to build a shared library and link the tools with it? |
| ENABLE_SHARED := @ENABLE_SHARED@ |
| |
| # Use -fvisibility-inlines-hidden? |
| ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@ |
| |
| # This option tells the Makefiles to produce verbose output. |
| # It essentially prints the commands that make is executing |
| #VERBOSE = 1 |
| |
| # Enable JIT for this platform |
| TARGET_HAS_JIT = @TARGET_HAS_JIT@ |
| |
| # Environment variable to set to change the runtime shared library search path. |
| SHLIBPATH_VAR = @SHLIBPATH_VAR@ |
| |
| # Shared library extension for host platform. |
| SHLIBEXT = @SHLIBEXT@ |
| |
| # Executable file extension for host platform. |
| EXEEXT = @EXEEXT@ |
| |
| # Things we just assume are "there" |
| ECHO := echo |
| |
| # Get the options for causing archives to link all their content instead of |
| # just missing symbols, and the inverse of that. This is used for certain LLVM |
| # tools that permit loadable modules. It ensures that the LLVM symbols will be |
| # available to those loadable modules. |
| LINKALL := @LINKALL@ |
| NOLINKALL := @NOLINKALL@ |
| |
| # Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending |
| # on the check. |
| HUGE_VAL_SANITY = @HUGE_VAL_SANITY@ |
| |
| # Bindings that we should build |
| BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@ |
| ALL_BINDINGS := @ALL_BINDINGS@ |
| OCAML_LIBDIR := @OCAML_LIBDIR@ |
| |
| # When compiling under Mingw/Cygwin, executables such as tblgen |
| # expect Windows paths, whereas the build system uses Unix paths. |
| # The function SYSPATH transforms Unix paths into Windows paths. |
| ifneq (,$(findstring -mno-cygwin, $(CXX))) |
| SYSPATH = $(shell echo $(1) | cygpath -m -f -) |
| else |
| SYSPATH = $(1) |
| endif |
| |
| # Location of the plugin header file for gold. |
| BINUTILS_INCDIR := @BINUTILS_INCDIR@ |
| |
| C_INCLUDE_DIRS := @C_INCLUDE_DIRS@ |
| CXX_INCLUDE_ROOT := @CXX_INCLUDE_ROOT@ |
| CXX_INCLUDE_ARCH := @CXX_INCLUDE_ARCH@ |
| CXX_INCLUDE_32BIT_DIR = @CXX_INCLUDE_32BIT_DIR@ |
| CXX_INCLUDE_64BIT_DIR = @CXX_INCLUDE_64BIT_DIR@ |
| |
| # TARGET_HAS_DYNAMIC_LIBS - This is set if the target supports dynamic linking |
| # .dylib or .so files. |
| ifeq ($(TARGET_OS), $(filter $(TARGET_OS), Cygwin MingW Minix)) |
| TARGET_HAS_DYNAMIC_LIBS := 1 |
| endif |
| |
| # When ENABLE_LLVMC_DYNAMIC is enabled, LLVMC will link libCompilerDriver |
| # dynamically. This is needed to make dynamic plugins work on some targets |
| # (Windows). |
| ENABLE_LLVMC_DYNAMIC = 0 |
| #@ENABLE_LLVMC_DYNAMIC@ |
| |
| # When ENABLE_LLVMC_DYNAMIC_PLUGINS is enabled, LLVMC will have dynamic plugin |
| # support (via the -load option). |
| ENABLE_LLVMC_DYNAMIC_PLUGINS = 1 |
| #@ENABLE_LLVMC_DYNAMIC_PLUGINS@ |
| |
| # Optional flags supported by the compiler |
| # -Wno-missing-field-initializers |
| NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@ |
| # -Wno-variadic-macros |
| NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@ |