Added MemOperands to Atomic operations since Atomics touches memory.
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52706 91177308-0d34-0410-b5e6-96231b3b80d8
diff --git a/docs/LangRef.html b/docs/LangRef.html
index 01b971b..4de69b0 100644
--- a/docs/LangRef.html
+++ b/docs/LangRef.html
@@ -216,9 +216,18 @@
<li><a href="#int_atomics">Atomic intrinsics</a>
<ol>
<li><a href="#int_memory_barrier"><tt>llvm.memory_barrier</tt></a></li>
- <li><a href="#int_atomic_lcs"><tt>llvm.atomic.lcs</tt></a></li>
- <li><a href="#int_atomic_las"><tt>llvm.atomic.las</tt></a></li>
+ <li><a href="#int_atomic_cmp_swap"><tt>llvm.atomic.cmp.swap</tt></a></li>
<li><a href="#int_atomic_swap"><tt>llvm.atomic.swap</tt></a></li>
+ <li><a href="#int_atomic_load_add"><tt>llvm.atomic.load.add</tt></a></li>
+ <li><a href="#int_atomic_load_sub"><tt>llvm.atomic.load.sub</tt></a></li>
+ <li><a href="#int_atomic_load_and"><tt>llvm.atomic.load.and</tt></a></li>
+ <li><a href="#int_atomic_load_nand"><tt>llvm.atomic.load.nand</tt></a></li>
+ <li><a href="#int_atomic_load_or"><tt>llvm.atomic.load.or</tt></a></li>
+ <li><a href="#int_atomic_load_xor"><tt>llvm.atomic.load.xor</tt></a></li>
+ <li><a href="#int_atomic_load_max"><tt>llvm.atomic.load.max</tt></a></li>
+ <li><a href="#int_atomic_load_min"><tt>llvm.atomic.load.min</tt></a></li>
+ <li><a href="#int_atomic_load_umax"><tt>llvm.atomic.load.umax</tt></a></li>
+ <li><a href="#int_atomic_load_umin"><tt>llvm.atomic.load.umin</tt></a></li>
</ol>
</li>
<li><a href="#int_general">General intrinsics</a>
@@ -5777,19 +5786,19 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="int_atomic_lcs">'<tt>llvm.atomic.lcs.*</tt>' Intrinsic</a>
+ <a name="int_atomic_cmp_swap">'<tt>llvm.atomic.cmp.swap.*</tt>' Intrinsic</a>
</div>
<div class="doc_text">
<h5>Syntax:</h5>
<p>
- This is an overloaded intrinsic. You can use <tt>llvm.atomic.lcs</tt> on any
+ This is an overloaded intrinsic. You can use <tt>llvm.atomic.cmp.swap</tt> on any
integer bit width. Not all targets support all bit widths however.</p>
<pre>
-declare i8 @llvm.atomic.lcs.i8( i8* <ptr>, i8 <cmp>, i8 <val> )
-declare i16 @llvm.atomic.lcs.i16( i16* <ptr>, i16 <cmp>, i16 <val> )
-declare i32 @llvm.atomic.lcs.i32( i32* <ptr>, i32 <cmp>, i32 <val> )
-declare i64 @llvm.atomic.lcs.i64( i64* <ptr>, i64 <cmp>, i64 <val> )
+declare i8 @llvm.atomic.cmp.swap.i8( i8* <ptr>, i8 <cmp>, i8 <val> )
+declare i16 @llvm.atomic.cmp.swap.i16( i16* <ptr>, i16 <cmp>, i16 <val> )
+declare i32 @llvm.atomic.cmp.swap.i32( i32* <ptr>, i32 <cmp>, i32 <val> )
+declare i64 @llvm.atomic.cmp.swap.i64( i64* <ptr>, i64 <cmp>, i64 <val> )
</pre>
<h5>Overview:</h5>
@@ -5799,7 +5808,7 @@
</p>
<h5>Arguments:</h5>
<p>
- The <tt>llvm.atomic.lcs</tt> intrinsic takes three arguments. The result as
+ The <tt>llvm.atomic.cmp.swap</tt> intrinsic takes three arguments. The result as
well as both <tt>cmp</tt> and <tt>val</tt> must be integer values with the
same bit width. The <tt>ptr</tt> argument must be a pointer to a value of
this integer type. While any bit width integer may be used, targets may only
@@ -5821,13 +5830,13 @@
store i32 4, %ptr
%val1 = add i32 4, 4
-%result1 = call i32 @llvm.atomic.lcs.i32( i32* %ptr, i32 4, %val1 )
+%result1 = call i32 @llvm.atomic.cmp.swap.i32( i32* %ptr, i32 4, %val1 )
<i>; yields {i32}:result1 = 4</i>
%stored1 = icmp eq i32 %result1, 4 <i>; yields {i1}:stored1 = true</i>
%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = 8</i>
%val2 = add i32 1, 1
-%result2 = call i32 @llvm.atomic.lcs.i32( i32* %ptr, i32 5, %val2 )
+%result2 = call i32 @llvm.atomic.cmp.swap.i32( i32* %ptr, i32 5, %val2 )
<i>; yields {i32}:result2 = 8</i>
%stored2 = icmp eq i32 %result2, 5 <i>; yields {i1}:stored2 = false</i>
@@ -5861,7 +5870,7 @@
<h5>Arguments:</h5>
<p>
- The <tt>llvm.atomic.ls</tt> intrinsic takes two arguments. Both the
+ The <tt>llvm.atomic.swap</tt> intrinsic takes two arguments. Both the
<tt>val</tt> argument and the result must be integers of the same bit width.
The first argument, <tt>ptr</tt>, must be a pointer to a value of this
integer type. The targets may only lower integer representations they
@@ -5896,19 +5905,19 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="int_atomic_las">'<tt>llvm.atomic.las.*</tt>' Intrinsic</a>
+ <a name="int_atomic_load_add">'<tt>llvm.atomic.load.add.*</tt>' Intrinsic</a>
</div>
<div class="doc_text">
<h5>Syntax:</h5>
<p>
- This is an overloaded intrinsic. You can use <tt>llvm.atomic.las</tt> on any
+ This is an overloaded intrinsic. You can use <tt>llvm.atomic.load.add</tt> on any
integer bit width. Not all targets support all bit widths however.</p>
<pre>
-declare i8 @llvm.atomic.las.i8.( i8* <ptr>, i8 <delta> )
-declare i16 @llvm.atomic.las.i16.( i16* <ptr>, i16 <delta> )
-declare i32 @llvm.atomic.las.i32.( i32* <ptr>, i32 <delta> )
-declare i64 @llvm.atomic.las.i64.( i64* <ptr>, i64 <delta> )
+declare i8 @llvm.atomic.load.add.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.add.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.add.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.add.i64.( i64* <ptr>, i64 <delta> )
</pre>
<h5>Overview:</h5>
@@ -5935,16 +5944,235 @@
<pre>
%ptr = malloc i32
store i32 4, %ptr
-%result1 = call i32 @llvm.atomic.las.i32( i32* %ptr, i32 4 )
+%result1 = call i32 @llvm.atomic.load.add.i32( i32* %ptr, i32 4 )
<i>; yields {i32}:result1 = 4</i>
-%result2 = call i32 @llvm.atomic.las.i32( i32* %ptr, i32 2 )
+%result2 = call i32 @llvm.atomic.load.add.i32( i32* %ptr, i32 2 )
<i>; yields {i32}:result2 = 8</i>
-%result3 = call i32 @llvm.atomic.las.i32( i32* %ptr, i32 5 )
+%result3 = call i32 @llvm.atomic.load.add.i32( i32* %ptr, i32 5 )
<i>; yields {i32}:result3 = 10</i>
-%memval = load i32* %ptr <i>; yields {i32}:memval1 = 15</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = 15</i>
</pre>
</div>
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="int_atomic_load_sub">'<tt>llvm.atomic.load.sub.*</tt>' Intrinsic</a>
+
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<p>
+ This is an overloaded intrinsic. You can use <tt>llvm.atomic.load.sub</tt> on
+ any integer bit width. Not all targets support all bit widths however.</p>
+<pre>
+declare i8 @llvm.atomic.load.sub.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.sub.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.sub.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.sub.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+<h5>Overview:</h5>
+<p>
+ This intrinsic subtracts <tt>delta</tt> to the value stored in memory at
+ <tt>ptr</tt>. It yields the original value at <tt>ptr</tt>.
+</p>
+<h5>Arguments:</h5>
+<p>
+
+ The intrinsic takes two arguments, the first a pointer to an integer value
+ and the second an integer value. The result is also an integer value. These
+ integer types can have any bit width, but they must all have the same bit
+ width. The targets may only lower integer representations they support.
+</p>
+<h5>Semantics:</h5>
+<p>
+ This intrinsic does a series of operations atomically. It first loads the
+ value stored at <tt>ptr</tt>. It then subtracts <tt>delta</tt>, stores the
+ result to <tt>ptr</tt>. It yields the original value stored at <tt>ptr</tt>.
+</p>
+
+<h5>Examples:</h5>
+<pre>
+%ptr = malloc i32
+ store i32 8, %ptr
+%result1 = call i32 @llvm.atomic.load.sub.i32( i32* %ptr, i32 4 )
+ <i>; yields {i32}:result1 = 8</i>
+%result2 = call i32 @llvm.atomic.load.sub.i32( i32* %ptr, i32 2 )
+ <i>; yields {i32}:result2 = 4</i>
+%result3 = call i32 @llvm.atomic.load.sub.i32( i32* %ptr, i32 5 )
+ <i>; yields {i32}:result3 = 2</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = -3</i>
+</pre>
+</div>
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="int_atomic_load_and">'<tt>llvm.atomic.load.and.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_nand">'<tt>llvm.atomic.load.nand.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_or">'<tt>llvm.atomic.load.or.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_xor">'<tt>llvm.atomic.load.xor.*</tt>' Intrinsic</a><br>
+
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<p>
+ These are overloaded intrinsics. You can use <tt>llvm.atomic.load_and</tt>,
+ <tt>llvm.atomic.load_nand</tt>, <tt>llvm.atomic.load_or</tt>, and
+ <tt>llvm.atomic.load_xor</tt> on any integer bit width. Not all targets
+ support all bit widths however.</p>
+<pre>
+declare i8 @llvm.atomic.load.and.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.and.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.and.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.and.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.or.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.or.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.or.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.or.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.nand.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.nand.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.nand.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.nand.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.xor.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.xor.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.xor.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.xor.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+<h5>Overview:</h5>
+<p>
+ These intrinsics bitwise the operation (and, nand, or, xor) <tt>delta</tt> to
+ the value stored in memory at <tt>ptr</tt>. It yields the original value
+ at <tt>ptr</tt>.
+</p>
+<h5>Arguments:</h5>
+<p>
+
+ These intrinsics take two arguments, the first a pointer to an integer value
+ and the second an integer value. The result is also an integer value. These
+ integer types can have any bit width, but they must all have the same bit
+ width. The targets may only lower integer representations they support.
+</p>
+<h5>Semantics:</h5>
+<p>
+ These intrinsics does a series of operations atomically. They first load the
+ value stored at <tt>ptr</tt>. They then do the bitwise operation
+ <tt>delta</tt>, store the result to <tt>ptr</tt>. They yield the original
+ value stored at <tt>ptr</tt>.
+</p>
+
+<h5>Examples:</h5>
+<pre>
+%ptr = malloc i32
+ store i32 0x0F0F, %ptr
+%result0 = call i32 @llvm.atomic.load.nand.i32( i32* %ptr, i32 0xFF )
+ <i>; yields {i32}:result0 = 0x0F0F</i>
+%result1 = call i32 @llvm.atomic.load.and.i32( i32* %ptr, i32 0xFF )
+ <i>; yields {i32}:result1 = 0xFFFFFFF0</i>
+%result2 = call i32 @llvm.atomic.load.or.i32( i32* %ptr, i32 0F )
+ <i>; yields {i32}:result2 = 0xF0</i>
+%result3 = call i32 @llvm.atomic.load.xor.i32( i32* %ptr, i32 0F )
+ <i>; yields {i32}:result3 = FF</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = F0</i>
+</pre>
+</div>
+
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="int_atomic_load_max">'<tt>llvm.atomic.load.max.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_min">'<tt>llvm.atomic.load.min.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_umax">'<tt>llvm.atomic.load.umax.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_umin">'<tt>llvm.atomic.load.umin.*</tt>' Intrinsic</a><br>
+
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<p>
+ These are overloaded intrinsics. You can use <tt>llvm.atomic.load_max</tt>,
+ <tt>llvm.atomic.load_min</tt>, <tt>llvm.atomic.load_umax</tt>, and
+ <tt>llvm.atomic.load_umin</tt> on any integer bit width. Not all targets
+ support all bit widths however.</p>
+<pre>
+declare i8 @llvm.atomic.load.max.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.max.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.max.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.max.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.min.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.min.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.min.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.min.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.umax.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.umax.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.umax.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.umax.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.umin.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.umin.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.umin.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.umin.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+<h5>Overview:</h5>
+<p>
+ These intrinsics takes the signed or unsigned minimum or maximum of
+ <tt>delta</tt> and the value stored in memory at <tt>ptr</tt>. It yields the
+ original value at <tt>ptr</tt>.
+</p>
+<h5>Arguments:</h5>
+<p>
+
+ These intrinsics take two arguments, the first a pointer to an integer value
+ and the second an integer value. The result is also an integer value. These
+ integer types can have any bit width, but they must all have the same bit
+ width. The targets may only lower integer representations they support.
+</p>
+<h5>Semantics:</h5>
+<p>
+ These intrinsics does a series of operations atomically. They first load the
+ value stored at <tt>ptr</tt>. They then do the signed or unsigned min or max
+ <tt>delta</tt> and the value, store the result to <tt>ptr</tt>. They yield
+ the original value stored at <tt>ptr</tt>.
+</p>
+
+<h5>Examples:</h5>
+<pre>
+%ptr = malloc i32
+ store i32 7, %ptr
+%result0 = call i32 @llvm.atomic.load.min.i32( i32* %ptr, i32 -2 )
+ <i>; yields {i32}:result0 = 7</i>
+%result1 = call i32 @llvm.atomic.load.max.i32( i32* %ptr, i32 8 )
+ <i>; yields {i32}:result1 = -2</i>
+%result2 = call i32 @llvm.atomic.load.umin.i32( i32* %ptr, i32 10 )
+ <i>; yields {i32}:result2 = 8</i>
+%result3 = call i32 @llvm.atomic.load.umax.i32( i32* %ptr, i32 30 )
+ <i>; yields {i32}:result3 = 8</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = 30</i>
+</pre>
+</div>
<!-- ======================================================================= -->
<div class="doc_subsection">