| #===-- Makefile.rules - Common make rules for LLVM ---------*- Makefile -*--===# |
| # |
| # The LLVM Compiler Infrastructure |
| # |
| # This file was developed by the LLVM research group and is distributed under |
| # the University of Illinois Open Source License. See LICENSE.TXT for details. |
| # |
| #===------------------------------------------------------------------------===# |
| # |
| # This file is included by all of the LLVM makefiles. For details on how to use |
| # it properly, please see the document MakefileGuide.html in the docs directory. |
| # |
| #===-----------------------------------------------------------------------==== |
| |
| ################################################################################ |
| # TARGETS: Define standard targets that can be invoked |
| ################################################################################ |
| |
| #-------------------------------------------------------------------- |
| # Define the various target sets |
| #-------------------------------------------------------------------- |
| RecursiveTargets := all clean clean-all install uninstall install-bytecode |
| LocalTargets := all-local clean-local clean-all-local check-local \ |
| install-local printvars uninstall-local \ |
| install-bytecode-local |
| TopLevelTargets := check dist dist-check dist-clean tags dist-gzip dist-bzip2 \ |
| dist-zip |
| UserTargets := $(RecursiveTargets) $(LocalTargets) $(TopLevelTargets) |
| InternalTargets := preconditions distdir dist-hook |
| |
| ################################################################################ |
| # INITIALIZATION: Basic things the makefile needs |
| ################################################################################ |
| |
| #-------------------------------------------------------------------- |
| # Set the VPATH so that we can find source files. |
| #-------------------------------------------------------------------- |
| VPATH=$(BUILD_SRC_DIR) |
| |
| #-------------------------------------------------------------------- |
| # Reset the list of suffixes we know how to build |
| #-------------------------------------------------------------------- |
| .SUFFIXES: |
| .SUFFIXES: .c .cpp .h .hpp .y .l .lo .o .a .bc .td .ps .dot |
| .SUFFIXES: $(SHLIBEXT) $(SUFFIXES) |
| |
| #-------------------------------------------------------------------- |
| # Mark all of these targets as phony to avoid implicit rule search |
| #-------------------------------------------------------------------- |
| .PHONY: $(UserTargets) $(InternalTargets) |
| |
| #-------------------------------------------------------------------- |
| # Make sure all the user-target rules are double colon rules and |
| # they are defined first. |
| #-------------------------------------------------------------------- |
| |
| $(UserTargets):: |
| |
| ################################################################################ |
| # PRECONDITIONS: that which must be built/checked first |
| ################################################################################ |
| |
| SrcMakefiles := $(filter %Makefile %Makefile.tests,\ |
| $(wildcard $(BUILD_SRC_DIR)/Makefile*)) |
| ObjMakefiles := $(subst $(BUILD_SRC_DIR),$(BUILD_OBJ_DIR),$(SrcMakefiles)) |
| ConfigureScript := $(LLVM_SRC_ROOT)/configure |
| ConfigStatusScript := $(LLVM_OBJ_ROOT)/config.status |
| MakefileConfigIn := $(LLVM_SRC_ROOT)/Makefile.config.in |
| MakefileConfig := $(LLVM_OBJ_ROOT)/Makefile.config |
| PreConditions := $(ConfigStatusScript) $(MakefileConfig) $(ObjMakefiles) |
| |
| preconditions : $(PreConditions) |
| |
| #------------------------------------------------------------------------ |
| # Make sure the BUILT_SOURCES are built first |
| #------------------------------------------------------------------------ |
| $(filter-out clean clean-local,UserTargets):: $(BUILT_SOURCES) |
| |
| clean-local:: |
| ifneq ($(strip $(BUILT_SOURCES)),) |
| -$(Verb) $(RM) -f $(BUILT_SOURCES) |
| endif |
| |
| $(BUILT_SOURCES) : $(ObjMakefiles) |
| |
| #------------------------------------------------------------------------ |
| # Make sure we're not using a stale configuration |
| #------------------------------------------------------------------------ |
| .PRECIOUS: $(ConfigStatusScript) |
| $(ConfigStatusScript): $(ConfigureScript) |
| $(Echo) Reconfiguring with $< |
| $(Verb) cd $(BUILD_OBJ_ROOT) && \ |
| $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \ |
| $(ConfigStatusScript) |
| |
| #------------------------------------------------------------------------ |
| # Make sure the configuration makefile is up to date |
| #------------------------------------------------------------------------ |
| $(MakefileConfig): $(MakefileConfigIn) $(ConfigStatusScript) |
| $(Echo) Regenerating $@ |
| $(Verb) cd $(LLVM_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config |
| |
| #------------------------------------------------------------------------ |
| # If the Makefile in the source tree has been updated, copy it over into the |
| # build tree. But, only do this if the source and object makefiles differ |
| #------------------------------------------------------------------------ |
| ifneq ($(BUILD_OBJ_DIR),$(BUILD_SRC_DIR)) |
| |
| Makefile: $(BUILD_SRC_DIR)/Makefile |
| $(Echo) "Updating Makefile" |
| $(Verb) $(MKDIR) $(@D) |
| $(Verb) cp -f $< $@ |
| |
| # Copy the Makefile.* files unless we're in the root directory which avoids |
| # the copying of Makefile.config.in or other things that should be explicitly |
| # taken care of. |
| $(BUILD_OBJ_DIR)/Makefile% : $(BUILD_SRC_DIR)/Makefile% |
| @case '$?' in \ |
| *Makefile.rules) ;; \ |
| *.in) ;; \ |
| *) $(Echo) "Updating $(@F)" ; \ |
| $(MKDIR) $(@D) ; \ |
| cp -f $< $@ ;; \ |
| esac |
| |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Set up the basic dependencies |
| #------------------------------------------------------------------------ |
| $(UserTargets):: $(PreConditions) |
| |
| all:: all-local |
| clean:: clean-local |
| clean-all:: clean-local clean-all-local |
| install:: install-local |
| uninstall:: uninstall-local |
| install-local:: all-local |
| install-bytecode:: install-bytecode-local |
| |
| ############################################################################### |
| # VARIABLES: Set up various variables based on configuration data |
| ############################################################################### |
| |
| #-------------------------------------------------------------------- |
| # Variables derived from configuration we are building |
| #-------------------------------------------------------------------- |
| |
| ifdef ENABLE_PROFILING |
| BuildMode := Profile |
| CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg |
| C.Flags := -O3 -DNDEBUG -pg |
| LD.Flags := -O3 -DNDEBUG -pg |
| else |
| ifdef ENABLE_OPTIMIZED |
| BuildMode := Release |
| CXX.Flags := -O3 -DNDEBUG -finline-functions \ |
| -felide-constructors -fomit-frame-pointer |
| C.Flags := -O3 -DNDEBUG -fomit-frame-pointer |
| LD.Flags := -O3 -DNDEBUG |
| else |
| BuildMode := Debug |
| CXX.Flags := -g -D_DEBUG |
| C.Flags := -g -D_DEBUG |
| LD.Flags := -g -D_DEBUG |
| KEEP_SYMBOLS := 1 |
| endif |
| endif |
| |
| CXX.Flags += $(CXXFLAGS) |
| C.Flags += $(CFLAGS) |
| CPP.Flags += $(CPPFLAGS) |
| LD.Flags += $(LDFLAGS) |
| AR.Flags := cru |
| LibTool.Flags := --tag=CXX |
| |
| #-------------------------------------------------------------------- |
| # Directory locations |
| #-------------------------------------------------------------------- |
| ObjDir := $(BUILD_OBJ_DIR)/$(BuildMode) |
| LibDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/lib |
| ToolDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/bin |
| ExmplDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/examples |
| LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib |
| LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin |
| LExmplDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/examples |
| |
| #-------------------------------------------------------------------- |
| # Full Paths To Compiled Tools and Utilities |
| #-------------------------------------------------------------------- |
| EchoCmd := $(ECHO) llvm[$(MAKELEVEL)]: |
| Echo := @$(EchoCmd) |
| ifndef LIBTOOL |
| LIBTOOL := $(LLVM_OBJ_ROOT)/mklib |
| endif |
| ifndef LLVMAS |
| LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT) |
| endif |
| ifndef BURG |
| BURG := $(LLVMToolDir)/burg$(EXEEXT) |
| endif |
| ifndef TBLGEN |
| TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT) |
| endif |
| ifndef GCCAS |
| GCCAS := $(LLVMToolDir)/gccas$(EXEEXT) |
| endif |
| ifndef GCCLD |
| GCCLD := $(LLVMToolDir)/gccld$(EXEEXT) |
| endif |
| ifndef LLVMGCC |
| LLVMGCC := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/gcc |
| endif |
| ifndef LLVMGXX |
| LLVMGXX := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/g++ |
| endif |
| |
| #-------------------------------------------------------------------- |
| # Adjust to user's request |
| #-------------------------------------------------------------------- |
| |
| # Adjust LIBTOOL flags for shared libraries, or not. |
| ifndef SHARED_LIBRARY |
| LibTool.Flags += --tag=disable-shared |
| else |
| LD.Flags += -rpath $(LibDir) |
| endif |
| |
| ifdef TOOL_VERBOSE |
| C.Flags += -v |
| CXX.Flags += -v |
| LD.Flags += -v |
| VERBOSE := 1 |
| endif |
| |
| # Adjust settings for verbose mode |
| ifndef VERBOSE |
| Verb := @ |
| LibTool.Flags += --silent |
| AR.Flags += >/dev/null 2>/dev/null |
| ConfigureScriptFLAGS += >$(BUILD_OBJ_DIR)/configure.out 2>&1 |
| else |
| ConfigureScriptFLAGS := |
| endif |
| |
| # By default, strip symbol information from executable |
| ifndef KEEP_SYMBOLS |
| Strip := $(PLATFORMSTRIPOPTS) |
| StripWarnMsg := "(without symbols)" |
| endif |
| |
| # Adjust linker flags for building an executable |
| ifdef TOOLNAME |
| ifdef EXAMPLE_TOOL |
| LD.Flags += -rpath $(ExmplDir) -export-dynamic |
| else |
| LD.Flags += -rpath $(ToolDir) -export-dynamic |
| endif |
| endif |
| |
| #---------------------------------------------------------- |
| # Options To Invoke Tools |
| #---------------------------------------------------------- |
| |
| CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused |
| |
| LD.Flags += -L$(LibDir) -L$(LLVMLibDir) |
| CPP.Flags += -I$(BUILD_OBJ_DIR) \ |
| -I$(BUILD_SRC_DIR) \ |
| -I$(BUILD_SRC_ROOT)/include \ |
| -I$(BUILD_OBJ_ROOT)/include \ |
| -I$(LLVM_OBJ_ROOT)/include \ |
| -I$(LLVM_SRC_ROOT)/include \ |
| -D_GNU_SOURCE -D__STDC_LIMIT_MACROS |
| |
| Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags) |
| LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C) |
| BCCompile.C = $(LLVMGCC) $(CPP.Flags) $(CompileCommonOpts) $(C.Flags) -c |
| Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c |
| LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX) |
| BCCompile.CXX = $(LLVMGXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c |
| Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \ |
| $(CompileCommonOpts) $(LD.Flags) $(Strip) |
| Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \ |
| $(CompileCommonOpts) |
| LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL) |
| Burg = $(BURG) -I $(BUILD_SRC_DIR) |
| TableGen = $(TBLGEN) -I $(BUILD_SRC_DIR) |
| Archive = $(AR) $(AR.Flags) |
| LArchive = $(LLVMToolDir)/llvm-ar rcsf |
| ifdef RANLIB |
| Ranlib = $(RANLIB) |
| else |
| Ranlib = ranlib |
| endif |
| |
| #---------------------------------------------------------- |
| # Get the list of source files and compute object file |
| # names from them. |
| #---------------------------------------------------------- |
| ifdef FAKE_SOURCES |
| Sources := |
| FakeSources := $(FAKE_SOURCES) |
| ifdef BUILT_SOURCES |
| FakeSources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES)) |
| endif |
| BaseNameSources := $(sort $(basename $(FakeSources))) |
| ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o) |
| ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo) |
| ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc) |
| else |
| ifndef SOURCES |
| Sources := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \ |
| $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \ |
| $(BUILD_SRC_DIR)/*.l)) |
| else |
| Sources := $(SOURCES) |
| endif |
| |
| ifdef BUILT_SOURCES |
| Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES)) |
| endif |
| |
| BaseNameSources := $(sort $(basename $(Sources))) |
| ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o) |
| ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo) |
| ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc) |
| endif |
| |
| ############################################################################### |
| # DIRECTORIES: Handle recursive descent of directory structure |
| ############################################################################### |
| |
| #--------------------------------------------------------- |
| # Provide rules to make install dirs. This must be early |
| # in the file so they get built before dependencies |
| #--------------------------------------------------------- |
| |
| $(bindir): |
| $(Verb) $(MKDIR) $(bindir) |
| |
| $(libdir): |
| $(Verb) $(MKDIR) $(libdir) |
| |
| $(bytecode_libdir): |
| $(Verb) $(MKDIR) $(bytecode_libdir) |
| |
| $(sysconfdir): |
| $(Verb) $(MKDIR) $(sysconfdir) |
| |
| # To create other directories, as needed, and timestamp their creation |
| %/.dir: |
| $(Verb) $(MKDIR) $* > /dev/null |
| $(Verb) $(DATE) > $@ |
| |
| .PRECIOUS: $(ObjDir)/.dir $(LibDir)/.dir $(ToolDir)/.dir $(ExmplDir)/.dir |
| .PRECIOUS: $(LLVMLibDir)/.dir $(LLVMToolDir)/.dir $(LLVMExmplDir)/.dir |
| |
| #--------------------------------------------------------- |
| # Handle the DIRS options for sequential construction |
| #--------------------------------------------------------- |
| |
| SubDirs := |
| ifdef DIRS |
| SubDirs += $(DIRS) |
| $(RecursiveTargets):: |
| $(Verb) for dir in $(DIRS); do \ |
| if [ ! -f $$dir/Makefile ]; then \ |
| $(MKDIR) $$dir; \ |
| cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ |
| fi; \ |
| if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ |
| ($(MAKE) -C $$dir $@ ) || exit 1; \ |
| fi ; \ |
| done |
| endif |
| |
| #--------------------------------------------------------- |
| # Handle the EXPERIMENTAL_DIRS options ensuring success |
| # after each directory is built. |
| #--------------------------------------------------------- |
| ifdef EXPERIMENTAL_DIRS |
| $(RecursiveTargets):: |
| $(Verb) for dir in $(EXPERIMENTAL_DIRS); do \ |
| if [ ! -f $$dir/Makefile ]; then \ |
| $(MKDIR) $$dir; \ |
| cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ |
| fi; \ |
| if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ |
| ($(MAKE) -C $$dir $@ ) || exit 0; \ |
| fi ; \ |
| done |
| endif |
| |
| #--------------------------------------------------------- |
| # Handle the PARALLEL_DIRS options for parallel construction |
| #--------------------------------------------------------- |
| ifdef PARALLEL_DIRS |
| |
| SubDirs += $(PARALLEL_DIRS) |
| |
| # Unfortunately, this list must be maintained if new recursive targets are added |
| all :: $(addsuffix /.makeall ,$(PARALLEL_DIRS)) |
| clean :: $(addsuffix /.makeclean ,$(PARALLEL_DIRS)) |
| clean-all:: $(addsuffix /.makeclean-all,$(PARALLEL_DIRS)) |
| install :: $(addsuffix /.makeinstall ,$(PARALLEL_DIRS)) |
| uninstall:: $(addsuffix /.makeuninstall,$(PARALLEL_DIRS)) |
| install-bytecode :: $(addsuffix /.makeinstall-bytecode,$(PARALLEL_DIRS)) |
| |
| ParallelTargets := $(foreach T,$(RecursiveTargets),%/.make$(T)) |
| |
| $(ParallelTargets) : |
| $(Verb) if [ ! -f $(@D)/Makefile ]; then \ |
| $(MKDIR) $(@D); \ |
| cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \ |
| fi; \ |
| if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ |
| $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \ |
| fi |
| endif |
| |
| #--------------------------------------------------------- |
| # Handle the OPTIONAL_DIRS options for directores that may |
| # or may not exist. |
| #--------------------------------------------------------- |
| ifdef OPTIONAL_DIRS |
| |
| SubDirs += $(OPTIONAL_DIRS) |
| |
| $(RecursiveTargets):: |
| $(Verb) for dir in $(OPTIONAL_DIRS); do \ |
| if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\ |
| if [ ! -f $$dir/Makefile ]; then \ |
| $(MKDIR) $$dir; \ |
| cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ |
| fi; \ |
| if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ |
| ($(MAKE) -C$$dir $@ ) || exit 1; \ |
| fi ; \ |
| fi \ |
| done |
| endif |
| |
| #--------------------------------------------------------- |
| # Handle the CONFIG_FILES options |
| #--------------------------------------------------------- |
| ifdef CONFIG_FILES |
| |
| install-local:: $(sysconfdir) $(CONFIG_FILES) |
| $(Echo) Installing Configuration Files To $(sysconfdir) |
| $(Verb)for file in $(CONFIG_FILES); do \ |
| if test -f $(BUILD_OBJ_DIR)/$${file} ; then \ |
| $(INSTALL) $(BUILD_OBJ_DIR)/$${file} $(sysconfdir) ; \ |
| elif test -f $(BUILD_SRC_DIR)/$${file} ; then \ |
| $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \ |
| else \ |
| $(ECHO) Error: cannot find config file $${file}. ; \ |
| fi \ |
| done |
| |
| uninstall-local:: |
| $(Echo) Uninstalling Configuration Files From $(sysconfdir) |
| $(Verb)for file in $(CONFIG_FILES); do \ |
| $(RM) -f $(sysconfdir)/$${file} ; \ |
| done |
| |
| endif |
| |
| ############################################################################### |
| # Library Build Rules: Four ways to build a library |
| ############################################################################### |
| |
| #--------------------------------------------------------- |
| # Bytecode Module Targets: |
| # If the user set MODULE_NAME then they want to build a |
| # bytecode module from the sources. We compile all the |
| # sources and link it together into a single bytecode |
| # module. |
| #--------------------------------------------------------- |
| |
| ifdef MODULE_NAME |
| |
| Module := $(LibDir)/$(MODULE_NAME).bc |
| LinkModule := $(LLVMGCC) -shared -nostdlib |
| |
| ifdef EXPORTED_SYMBOL_FILE |
| LinkMOdule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE) |
| endif |
| |
| $(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD) |
| $(Echo) Building $(BuildMOde) Bytecode Module $(notdir $@) |
| $(Verb) $(LinkModule) -o $@ $(ObjectsBC) |
| |
| all-local:: $(Module) |
| |
| clean-local:: |
| ifneq ($(strip $(Module)),) |
| -$(Verb) $(RM) -f $(Module) |
| endif |
| |
| DestModule := $(bytecode_libdir)/$(MODULE_NAME).bc |
| |
| install-local:: $(DestModule) |
| |
| $(DestModule): $(bytecode_libdir) $(Module) |
| $(Echo) Installing $(BuildMode) Bytecode Module $(DestModule) |
| $(Verb) $(INSTALL) $(Module) $@ |
| |
| uninstall-local:: |
| $(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule) |
| -$(Verb) $(RM) -f $(DestModule) |
| |
| endif |
| |
| # if we're building a library ... |
| ifdef LIBRARYNAME |
| |
| # Make sure there isn't any extranous whitespace on the LIBRARYNAME option |
| LIBRARYNAME := $(strip $(LIBRARYNAME)) |
| LibName.LA := $(LibDir)/lib$(LIBRARYNAME).la |
| LibName.A := $(LibDir)/lib$(LIBRARYNAME).a |
| LibName.O := $(LibDir)/$(LIBRARYNAME).o |
| LibName.BCA:= $(LibDir)/lib$(LIBRARYNAME).bca |
| |
| #--------------------------------------------------------- |
| # Shared Library Targets: |
| # If the user asked for a shared library to be built |
| # with the SHARED_LIBRARY variable, then we provide |
| # targets for building them. |
| #--------------------------------------------------------- |
| ifdef SHARED_LIBRARY |
| |
| all-local:: $(LibName.LA) |
| |
| $(LibName.LA): $(BUILT_SOURCES) $(ObjectsLO) $(LibDir)/.dir |
| $(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT) |
| $(Verb) $(Link) -o $@ $(ObjectsLO) |
| $(Verb) $(LTInstall) $@ $(LibDir) |
| |
| clean-local:: |
| ifneq ($(strip $(LibName.LA)),) |
| -$(Verb) $(RM) -f $(LibName.LA) |
| endif |
| |
| DestSharedLib = $(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT) |
| |
| install-local:: $(DestSharedLib) |
| |
| $(DestSharedLib): $(libdir) $(LibName.LA) |
| $(Echo) Installing $(BuildMode) Shared Library $(DestSharedLib) |
| $(Verb) $(LTInstall) $(LibName.LA) $(DestSharedLib) |
| $(Verb) $(LIBTOOL) --finish $(libdir) |
| |
| uninstall-local:: |
| $(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib) |
| -$(Verb) $(RM) -f $(libdir)/lib$(LIBRARYNAME).* |
| |
| endif |
| |
| #--------------------------------------------------------- |
| # Bytecode Library Targets: |
| # If the user asked for a bytecode library to be built |
| # with the BYTECODE_LIBRARY variable, then we provide |
| # targets for building them. |
| #--------------------------------------------------------- |
| ifdef BYTECODE_LIBRARY |
| |
| # make the C and C++ compilers strip debug info out of bytecode libraries. |
| BCCompile.C += -Wa,-strip-debug |
| BCCompile.CXX += -Wa,-strip-debug |
| |
| all-local:: $(LibName.BCA) |
| |
| ifdef EXPORTED_SYMBOL_FILE |
| BCLinkLib = $(LLVMGCC) -shared -nostdlib -Xlinker \ |
| -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE) |
| |
| $(LibName.BCA): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD) |
| $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \ |
| "(internalize)" |
| $(Verb) $(BCLinkLib) -o $(ObjDir)/$(LIBRARYNAME).o $(ObjectsBC) |
| $(Verb) $(LArchive) $@ $(ObjDir)/$(LIBRARYNAME).o |
| else |
| $(LibName.BCA): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir |
| $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) |
| $(Verb) $(LArchive) $@ $(ObjectsBC) |
| |
| endif |
| |
| clean-local:: |
| ifneq ($(strip $(LibName.BCA)),) |
| -$(Verb) $(RM) -f $(LibName.BCA) |
| endif |
| |
| DestBytecodeLib = $(bytecode_libdir)/lib$(LIBRARYNAME).a |
| |
| install-bytecode-local:: $(DestBytecodeLib) |
| |
| install-local:: $(DestBytecodeLib) |
| |
| $(DestBytecodeLib): $(bytecode_libdir) $(LibName.BCA) |
| $(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib) |
| $(Verb) $(INSTALL) $(LibName.BCA) $@ |
| |
| uninstall-local:: |
| $(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib) |
| -$(Verb) $(RM) -f $(DestBytecodeLib) |
| |
| endif |
| |
| #--------------------------------------------------------- |
| # ReLinked Library Targets: |
| # If the user didn't explicitly forbid building a |
| # relinked then we provide targets for building them. |
| #--------------------------------------------------------- |
| ifndef DONT_BUILD_RELINKED |
| |
| all-local:: $(LibName.O) |
| |
| $(LibName.O): $(BUILT_SOURCES) $(ObjectsO) $(LibDir)/.dir |
| $(Echo) Linking $(BuildMode) Object Library $(notdir $@) |
| $(Verb) $(Relink) -o $@ $(ObjectsO) |
| |
| clean-local:: |
| ifneq ($(strip $(LibName.O)),) |
| -$(Verb) $(RM) -f $(LibName.O) |
| endif |
| |
| DestRelinkedLib = $(libdir)/$(LIBRARYNAME).o |
| |
| install-local:: $(DestRelinkedLib) |
| |
| $(DestRelinkedLib): $(libdir) $(LibName.O) |
| $(Echo) Installing $(BuildMode) Object Library $(DestRelinkedLib) |
| $(Verb) $(LTInstall) $(LibName.O) $(DestRelinkedLib) |
| |
| uninstall-local:: |
| $(Echo) Uninstalling $(BuildMode) Object Library $(DestRelinkedLib) |
| -$(Verb) $(RM) -f $(DestRelinkedLib) |
| |
| endif |
| |
| #--------------------------------------------------------- |
| # Archive Library Targets: |
| # If the user wanted a regular archive library built, |
| # then we provide targets for building them. |
| #--------------------------------------------------------- |
| ifdef BUILD_ARCHIVE |
| |
| all-local:: $(LibName.A) |
| |
| $(LibName.A): $(BUILT_SOURCES) $(ObjectsO) $(LibDir)/.dir |
| $(Echo) Building $(BuildMode) Archive Library $(notdir $@) |
| -$(Verb) $(RM) -f $@ |
| $(Verb) $(Archive) $@ $(ObjectsO) |
| $(Verb) $(Ranlib) $@ |
| |
| clean-local:: |
| ifneq ($(strip $(LibName.A)),) |
| -$(Verb) $(RM) -f $(LibName.A) |
| endif |
| |
| DestArchiveLib := $(libdir)/lib$(LIBRARYNAME).a |
| |
| install-local:: $(DestArchiveLib) |
| |
| $(DestArchiveLib): $(libdir) $(LibName.A) |
| $(Echo) Installing $(BuildMode) Archive Library $(DestArchiveLib) |
| $(Verb) $(MKDIR) $(libdir) |
| $(Verb) $(LTInstall) $(LibName.A) $(DestArchiveLib) |
| |
| uninstall-local:: |
| $(Echo) Uninstalling $(BuildMode) Archive Library $(DestArchiveLib) |
| -$(Verb) $(RM) -f $(DestArchiveLib) |
| |
| endif |
| |
| # endif LIBRARYNAME |
| endif |
| |
| ############################################################################### |
| # Tool Build Rules: Build executable tool based on TOOLNAME option |
| ############################################################################### |
| |
| ifdef TOOLNAME |
| |
| #--------------------------------------------------------- |
| # Handle the special "JIT" value for LLVM_LIBS which is a |
| # shorthand for a bunch of libraries that get the correct |
| # JIT support for a tool that runs JIT. |
| #--------------------------------------------------------- |
| ifeq ($(LLVMLIBS),JIT) |
| |
| # Make sure we can get our own symbols in the tool |
| Link += -dlopen self |
| |
| # Generic JIT libraries |
| JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine |
| |
| # You can enable the X86 JIT on a non-X86 host by setting the flag |
| # ENABLE_X86_JIT on the make command line. If not, it will still be |
| # enabled automagically on an X86 host. |
| ifeq ($(ARCH), x86) |
| ENABLE_X86_JIT = 1 |
| endif |
| |
| # What the X86 JIT requires |
| ifdef ENABLE_X86_JIT |
| JIT_LIBS += LLVMX86 LLVMSelectionDAG |
| endif |
| |
| # You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag |
| # ENABLE_SPARCV9_JIT on the make command line. If not, it will still be |
| # enabled automagically on an SparcV9 host. |
| ifeq ($(ARCH), Sparc) |
| ENABLE_SPARCV9_JIT = 1 |
| endif |
| |
| # What the Sparc JIT requires |
| ifdef ENABLE_SPARCV9_JIT |
| JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \ |
| LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \ |
| LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \ |
| LLVMDataStructure.a LLVMSparcV9RegAlloc |
| endif |
| |
| # You can enable the PowerPC JIT on a non-PowerPC host by setting the flag |
| # ENABLE_PPC_JIT on the make command line. If not, it will still be |
| # enabled automagically on an PowerPC host. |
| ifeq ($(ARCH), PowerPC) |
| ENABLE_PPC_JIT = 1 |
| endif |
| |
| # What the PowerPC JIT requires |
| ifdef ENABLE_PPC_JIT |
| JIT_LIBS += LLVMPowerPC |
| endif |
| |
| LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \ |
| LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \ |
| LLVMSystem.a $(PLATFORMLIBDL) |
| endif |
| |
| #--------------------------------------------------------- |
| # Set up variables for building a tool. |
| #--------------------------------------------------------- |
| ifdef EXAMPLE_TOOL |
| ToolBuildPath := $(ExmplDir)/$(TOOLNAME)$(EXEEXT) |
| else |
| ToolBuildPath := $(ToolDir)/$(TOOLNAME)$(EXEEXT) |
| endif |
| ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) |
| ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions)) |
| LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) |
| LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions)) |
| ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) |
| LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS))) |
| ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs)) |
| LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs)) |
| |
| #--------------------------------------------------------- |
| # Tell make that we need to rebuild subdirectories before |
| # we can link the tool. This affects things like LLI which |
| # has library subdirectories. |
| #--------------------------------------------------------- |
| $(ToolBuildPath): $(addsuffix /.makeall, $(PARALLEL_DIRS)) |
| |
| #--------------------------------------------------------- |
| # Provide targets for building the tools |
| #--------------------------------------------------------- |
| all-local:: $(ToolBuildPath) |
| |
| clean-local:: |
| ifneq ($(strip $(ToolBuildPath)),) |
| -$(Verb) $(RM) -f $(ToolBuildPath) |
| endif |
| |
| ifdef EXAMPLE_TOOL |
| $(ToolBuildPath): $(ExmplDir)/.dir |
| else |
| $(ToolBuildPath): $(ToolDir)/.dir |
| endif |
| |
| $(ToolBuildPath): $(BUILT_SOURCES) $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths) |
| $(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg) |
| $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \ |
| $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) |
| $(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) $(StripWarnMsg) |
| |
| DestTool = $(bindir)/$(TOOLNAME) |
| |
| install-local:: $(DestTool) |
| |
| $(DestTool): $(bindir) $(ToolBuildPath) |
| $(Echo) Installing $(BuildMode) $(DestTool) |
| $(Verb) $(INSTALL) $(ToolBuildPath) $(DestTool) |
| |
| uninstall-local:: |
| $(Echo) Uninstalling $(BuildMode) $(DestTool) |
| -$(Verb) $(RM) -f $(DestTool) |
| |
| endif |
| |
| ############################################################################### |
| # Object Build Rules: Build object files based on sources |
| ############################################################################### |
| |
| # Provide rule sets for when dependency generation is enabled |
| ifndef DISABLE_AUTO_DEPENDENCIES |
| |
| #--------------------------------------------------------- |
| # Create .lo files in the ObjDir directory from the .cpp and .c files... |
| #--------------------------------------------------------- |
| ifdef SHARED_LIBRARY |
| |
| $(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)" |
| $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \ |
| then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \ |
| else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi |
| |
| $(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir |
| $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)" |
| $(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \ |
| then $(MV) -f "$(ObjDir)/$*.LACd" "$(ObjDir)/$*.d"; \ |
| else $(RM) -f "$(ObjDir)/$*.LACd"; exit 1; fi |
| |
| #--------------------------------------------------------- |
| # Create .o files in the ObjDir directory from the .cpp and .c files... |
| #--------------------------------------------------------- |
| else |
| |
| $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build" |
| $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \ |
| then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \ |
| else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi |
| |
| $(ObjDir)/%.o: %.c $(ObjDir)/.dir |
| $(Echo) "Compiling $*.c for $(BuildMode) build" |
| $(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \ |
| then $(MV) -f "$(ObjDir)/$*.Cd" "$(ObjDir)/$*.d"; \ |
| else $(RM) -f "$(ObjDir)/$*.Cd"; exit 1; fi |
| |
| endif |
| |
| #--------------------------------------------------------- |
| # Create .bc files in the ObjDir directory from .cpp and .c files... |
| #--------------------------------------------------------- |
| $(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)" |
| $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \ |
| then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \ |
| else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi |
| |
| $(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) |
| $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)" |
| $(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" $< -o $@ ; \ |
| then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \ |
| else $(RM) -f "$(ObjDir)/$*.BCCd"; exit 1; fi |
| |
| # Provide alternate rule sets if dependencies are disabled |
| else |
| |
| ifdef SHARED_LIBRARY |
| |
| $(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)" |
| $(LTCompile.CXX) $< -o $@ |
| |
| $(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)" |
| $(LTCompile.C) $< -o $@ |
| |
| else |
| |
| $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build" |
| $(Compile.CXX) $< -o $@ |
| |
| $(ObjDir)/%.o: %.c $(ObjDir)/.dir |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build" |
| $(Compile.C) $< -o $@ |
| endif |
| |
| $(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) |
| $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)" |
| $(BCCompile.CXX) $< -o $@ |
| |
| $(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) |
| $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)" |
| $(BCCompile.C) $< -o $@ |
| |
| endif |
| |
| #--------------------------------------------------------- |
| # Provide rule to build .bc files from .ll sources, |
| # regardless of dependencies |
| #--------------------------------------------------------- |
| $(ObjDir)/%.bc: %.ll $(ObjDir)/.dir $(LLVMAS) |
| $(Echo) "Compiling $*.ll for $(BuildMode) build" |
| $(Verb) $(LLVMAS) $< -f -o $@ |
| |
| ############################################################################### |
| # TABLEGEN: Provide rules for running tblgen to produce *.inc files |
| ############################################################################### |
| |
| ifdef TARGET |
| |
| TDFiles := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td) |
| INCFiles := $(filter %.inc,$(BUILT_SOURCES)) |
| |
| $(INCFiles) : $(TBLGEN) $(TDFiles) |
| |
| %GenRegisterNames.inc : %.td |
| $(Echo) "Building $(<F) register names with tblgen" |
| $(Verb) $(TableGen) -gen-register-enums -o $@ $< |
| |
| %GenRegisterInfo.h.inc : %.td |
| $(Echo) "Building $(<F) register information header with tblgen" |
| $(Verb) $(TableGen) -gen-register-desc-header -o $@ $< |
| |
| %GenRegisterInfo.inc : %.td |
| $(Echo) "Building $(<F) register info implementation with tblgen" |
| $(Verb) $(TableGen) -gen-register-desc -o $@ $< |
| |
| %GenInstrNames.inc : %.td |
| $(Echo) "Building $(<F) instruction names with tblgen" |
| $(Verb) $(TableGen) -gen-instr-enums -o $@ $< |
| |
| %GenInstrInfo.inc : %.td |
| $(Echo) "Building $(<F) instruction information with tblgen" |
| $(Verb) $(TableGen) -gen-instr-desc -o $@ $< |
| |
| %GenAsmWriter.inc : %.td |
| $(Echo) "Building $(<F) assembly writer with tblgen" |
| $(Verb) $(TableGen) -gen-asm-writer -o $@ $< |
| |
| %GenATTAsmWriter.inc : %.td |
| $(Echo) "Building $(<F) AT&T assembly writer with tblgen" |
| $(Verb) $(TableGen) -gen-asm-writer -o $@ $< |
| |
| %GenIntelAsmWriter.inc : %.td |
| $(Echo) "Building $(<F) Intel assembly writer with tblgen" |
| $(Verb) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $@ $< |
| |
| %GenInstrSelector.inc: %.td |
| $(Echo) "Building $(<F) instruction selector with tblgen" |
| $(Verb) $(TableGen) -gen-instr-selector -o $@ $< |
| |
| %GenCodeEmitter.inc:: %.td |
| $(Echo) "Building $(<F) code emitter with tblgen" |
| $(Verb) $(TableGen) -gen-emitter -o $@ $< |
| |
| clean-local:: |
| -$(Verb) $(RM) -f $(INCFiles) |
| |
| endif |
| |
| ############################################################################### |
| # LEX AND YACC: Provide rules for generating sources with lex and yacc |
| ############################################################################### |
| |
| #--------------------------------------------------------- |
| # Provide rules for generating a .cpp source file from |
| # (f)lex input sources. |
| #--------------------------------------------------------- |
| |
| LexFiles := $(filter %.l,$(Sources)) |
| |
| ifneq ($(LexFiles),) |
| |
| LexOutput := $(strip $(patsubst %.l,%.cpp,$(LexFiles))) |
| |
| .PRECIOUS: $(LexOutput) |
| |
| # Note the extra sed filtering here, used to cut down on the warnings emited |
| # by GCC. The last line is a gross hack to work around flex aparently not |
| # being able to resize the buffer on a large token input. Currently, for |
| # uninitialized string buffers in LLVM we can generate very long tokens, so |
| # this is a hack around it. |
| # FIXME. (f.e. char Buffer[10000] ) |
| %.cpp: %.l |
| $(Echo) Flexing $< |
| $(Verb) $(FLEX) -t $< | \ |
| $(SED) 's/void yyunput/inline void yyunput/' | \ |
| $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \ |
| $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \ |
| > $@ |
| |
| clean-local:: |
| -$(Verb) $(RM) -f $(LexOutput) |
| $(Verb) $(RM) -f $(LexOutput) |
| |
| endif |
| |
| #--------------------------------------------------------- |
| # Provide rules for generating a .cpp and .h source files |
| # from yacc (bison) input sources. |
| #--------------------------------------------------------- |
| |
| YaccFiles := $(filter %.y,$(Sources)) |
| ifneq ($(YaccFiles),) |
| YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.h .cpp .output) |
| |
| .PRECIOUS: $(YaccOutput) |
| |
| # Cancel built-in rules for yacc |
| %.c: %.y |
| %.cpp: %.y |
| %.h: %.y |
| |
| # Rule for building the bison parsers... |
| %.cpp %.h : %.y |
| $(Echo) "Bisoning $*.y" |
| $(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $< |
| $(Verb) $(MV) -f $*.tab.c $*.cpp |
| $(Verb) $(MV) -f $*.tab.h $*.h |
| |
| clean-local:: |
| -$(Verb) $(RM) -f $(YaccOutput) |
| $(Verb) $(RM) -f $(YaccOutput) |
| endif |
| |
| ############################################################################### |
| # OTHER RULES: Other rules needed |
| ############################################################################### |
| |
| # To create postscript files from dot files... |
| ifneq ($(DOT),false) |
| %.ps: %.dot |
| $(DOT) -Tps < $< > $@ |
| else |
| %.ps: %.dot |
| $(Echo) "Cannot build $@: The program dot is not installed" |
| endif |
| |
| # This rules ensures that header files that are removed still have a rule for |
| # which they can be "generated." This allows make to ignore them and |
| # reproduce the dependency lists. |
| %.h:: ; |
| |
| # Define clean-local to clean the current directory. Note that this uses a |
| # very conservative approach ensuring that empty variables do not cause |
| # errors or disastrous removal. |
| clean-local:: |
| ifneq ($(strip $(ObjDir)),) |
| -$(Verb) $(RM) -rf $(ObjDir) |
| endif |
| -$(Verb) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc |
| ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set |
| -$(Verb) $(RM) -f *$(SHLIBEXT) |
| endif |
| |
| clean-all-local:: |
| -$(Verb) $(RM) -rf Debug Release Profile |
| |
| # Build tags database for Emacs/Xemacs: |
| tags:: TAGS CTAGS |
| |
| TAGS: |
| find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \ |
| $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \ |
| $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \ |
| $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \ |
| -name '*.cpp' -o -name '*.h' | \ |
| $(ETAGS) $(ETAGSFLAGS) - |
| |
| CTAGS: |
| find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \ |
| $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \ |
| $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \ |
| $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \ |
| \( -name '*.cpp' -o -name '*.h' \) -print | \ |
| ctags -ImtT -o $(BUILD_OBJ_ROOT)/CTAGS -L - |
| |
| |
| ############################################################################### |
| # DEPENDENCIES: Include the dependency files if we should |
| ############################################################################### |
| ifndef DISABLE_AUTO_DEPENDENCIES |
| |
| # If its not one of the cleaning targets |
| ifneq ($strip($(filter-out clean clean-local dist-clean,$(MAKECMDGOALS))),) |
| |
| # Get the list of dependency files |
| DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources))) |
| DependFiles := $(patsubst %,$(BUILD_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles)) |
| |
| -include /dev/null $(DependFiles) |
| |
| endif |
| |
| endif |
| |
| ############################################################################### |
| # CHECK: Running the test suite |
| ############################################################################### |
| |
| check:: |
| $(Verb) if test -d "$(BUILD_OBJ_ROOT)/test" ; then \ |
| if test -f "$(BUILD_OBJ_ROOT)/test/Makefile" ; then \ |
| $(EchoCmd) Running test suite ; \ |
| $(MAKE) -C $(BUILD_OBJ_ROOT)/test check-local \ |
| TESTSUITE=$(TESTSUITE) ; \ |
| else \ |
| $(EchoCmd) No Makefile in test directory ; \ |
| fi ; \ |
| else \ |
| $(EchoCmd) No test directory ; \ |
| fi |
| |
| ############################################################################### |
| # DISTRIBUTION: Handle construction of a distribution tarball |
| ############################################################################### |
| |
| #------------------------------------------------------------------------ |
| # Define distribution related variables |
| #------------------------------------------------------------------------ |
| DistName := $(LLVM_TARBALL_NAME) |
| DistDir := $(BUILD_OBJ_ROOT)/$(DistName) |
| TopDistDir := $(BUILD_OBJ_ROOT)/$(DistName) |
| DistTarGZip := $(BUILD_OBJ_ROOT)/$(DistName).tar.gz |
| DistZip := $(BUILD_OBJ_ROOT)/$(DistName).zip |
| DistTarBZ2 := $(BUILD_OBJ_ROOT)/$(DistName).tar.bz2 |
| DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \ |
| ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \ |
| Makefile.config.in configure autoconf |
| DistOther := $(notdir $(wildcard \ |
| $(BUILD_SRC_DIR)/*.h \ |
| $(BUILD_SRC_DIR)/*.td \ |
| $(BUILD_SRC_DIR)/*.def \ |
| $(BUILD_SRC_DIR)/*.ll \ |
| $(BUILD_SRC_DIR)/*.in)) |
| DistSubDirs := $(SubDirs) |
| DistSources = $(Sources) $(EXTRA_DIST) |
| DistFiles = $(DistAlways) $(DistSources) $(DistOther) |
| |
| #------------------------------------------------------------------------ |
| # We MUST build distribution with OBJ_DIR != SRC_DIR |
| #------------------------------------------------------------------------ |
| ifeq ($(BUILD_SRC_DIR),$(BUILD_OBJ_DIR)) |
| dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip :: |
| $(Echo) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR |
| |
| else |
| |
| #------------------------------------------------------------------------ |
| # Prevent catastrophic remove |
| #------------------------------------------------------------------------ |
| ifeq ($(LLVM_TARBALL_NAME),) |
| $(error LLVM_TARBALL_NAME is empty. Please rerun configure) |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Prevent attempt to run dist targets from anywhere but the top level |
| #------------------------------------------------------------------------ |
| ifneq ($(LEVEL),.) |
| |
| dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip :: |
| $(Echo) ERROR: You must run $@ from $(BUILD_OBJ_ROOT) |
| |
| else |
| |
| #------------------------------------------------------------------------ |
| # Provide the top level targets |
| #------------------------------------------------------------------------ |
| |
| dist-gzip:: $(DistTarGZip) |
| |
| $(DistTarGZip) : $(TopDistDir)/.makedistdir |
| $(Echo) Packing gzipped distribution tar file. |
| $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \ |
| $(GZIP) -c > "$(DistTarGZip)" |
| |
| dist-bzip2:: $(DistTarBZ2) |
| |
| $(DistTarBZ2) : $(TopDistDir)/.makedistdir |
| $(Echo) Packing bzipped distribution tar file. |
| $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \ |
| $(BZIP2) -c >$(DistTarBZ2) |
| |
| dist-zip:: $(DistZip) |
| |
| $(DistZip) : $(TopDistDir)/.makedistdir |
| $(Echo) Packing zipped distribution file. |
| $(Verb) rm -f $(DistZip) |
| $(Verb) cd $(BUILD_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName) |
| |
| dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip) |
| $(Echo) ===== DISTRIBUTION PACKAGING SUCESSFUL ===== |
| |
| DistCheckDir := $(LLVM_OBJ_ROOT)/_distcheckdir |
| |
| dist-check:: $(DistTarGZip) |
| $(Echo) Checking distribution tar file. |
| $(Verb) if test -d $(DistCheckDir) ; then \ |
| $(RM) -rf $(DistCheckDir) ; \ |
| fi |
| $(Verb) $(MKDIR) $(DistCheckDir) |
| $(Verb) cd $(DistCheckDir) && \ |
| $(MKDIR) $(DistCheckDir)/build && \ |
| $(MKDIR) $(DistCheckDir)/install && \ |
| gunzip -c $(DistTarGZip) | $(TAR) xf - && \ |
| cd build && \ |
| ../$(DistName)/configure --prefix="$(DistCheckDir)/install" \ |
| --srcdir=../$(DistName) --with-llvmgccdir="$(LLVMGCCDIR)" && \ |
| $(MAKE) all && \ |
| $(MAKE) check && \ |
| $(MAKE) install && \ |
| $(MAKE) uninstall && \ |
| $(MAKE) dist && \ |
| $(MAKE) clean && \ |
| $(MAKE) dist-clean && \ |
| $(EchoCmd) ===== $(DistTarGZip) Ready For Distribution ===== |
| |
| dist-clean:: |
| $(Echo) Cleaning distribution files |
| -$(Verb) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) \ |
| $(DistCheckDir) |
| |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Provide the recursive distdir target for building the distribution directory |
| #------------------------------------------------------------------------ |
| distdir: $(DistDir)/.makedistdir |
| $(DistDir)/.makedistdir: $(DistSources) |
| $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \ |
| if test -d "$(DistDir)" ; then \ |
| find $(DistDir) -type d ! -perm -200 -exec chmod u+w {} ';' || \ |
| exit 1 ; \ |
| fi ; \ |
| $(EchoCmd) Removing old $(DistDir) ; \ |
| $(RM) -rf $(DistDir); \ |
| $(EchoCmd) Making 'all' to verify build ; \ |
| $(MAKE) all ; \ |
| fi |
| $(Echo) Building Distribution Directory $(DistDir) |
| $(Verb) $(MKDIR) $(DistDir) |
| $(Verb) srcdirstrip=`echo "$(BUILD_SRC_DIR)" | sed 's|.|.|g'`; \ |
| srcrootstrip=`echo "$(BUILD_SRC_ROOT)" | sed 's|.|.|g'`; \ |
| for file in $(DistFiles) ; do \ |
| case "$$file" in \ |
| $(BUILD_SRC_DIR)/*) \ |
| file=`echo "$$file" | sed "s#^$$srcdirstrip/##"` \ |
| ;; \ |
| $(BUILD_SRC_ROOT)/*) \ |
| file=`echo "$$file" | \ |
| sed "s#^$$srcrootstrip/##"` \ |
| ;; \ |
| esac; \ |
| if test -f "$(BUILD_SRC_DIR)/$$file" || \ |
| test -d "$(BUILD_SRC_DIR)/$$file" ; then \ |
| from_dir="$(BUILD_SRC_DIR)" ; \ |
| elif test -f "$$file" || test -d "$$file" ; then \ |
| from_dir=. ; \ |
| fi ; \ |
| to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'` ; \ |
| if test "$$to_dir" != "$$file" && test "$$to_dir" != "."; then \ |
| to_dir="$(DistDir)/$$dir"; \ |
| $(MKDIR) "$$to_dir" ; \ |
| else \ |
| to_dir="$(DistDir)"; \ |
| fi; \ |
| mid_dir=`echo "$$file" | sed -n -e 's#^\(.*\)/[^/]*$$#\1#p'`; \ |
| if test -n "$$mid_dir" ; then \ |
| $(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \ |
| fi ; \ |
| if test -d "$$from_dir/$$file"; then \ |
| if test -d "$(BUILD_SRC_DIR)/$$file" && \ |
| test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \ |
| cp -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \ |
| fi; \ |
| cp -pR $$from_dir/$$file $$to_dir || exit 1; \ |
| elif test -f "$$from_dir/$$file" ; then \ |
| cp -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \ |
| elif test -L "$$from_dir/$$file" ; then \ |
| cp -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \ |
| elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \ |
| $(EchoCmd) "===== WARNING: Distribution Source " \ |
| "$$from_dir/$$file Not Found!" ; \ |
| elif test "$(Verb)" != '@' ; then \ |
| $(EchoCmd) "Skipping non-existent $$from_dir/$$file" ; \ |
| fi; \ |
| done |
| $(Verb) for subdir in $(DistSubDirs) ; do \ |
| if test "$$subdir" \!= "." ; then \ |
| new_distdir="$(DistDir)/$$subdir" ; \ |
| test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \ |
| ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || \ |
| exit 1; \ |
| fi; \ |
| done |
| $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \ |
| $(EchoCmd) Eliminating CVS directories from distribution ; \ |
| $(RM) -rf `find $(TopDistDir) -type d -name CVS -print` ;\ |
| $(MAKE) dist-hook ; \ |
| $(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \ |
| -o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \ |
| -o ! -type d ! -perm -400 -exec chmod a+r {} \; \ |
| -o ! -type d ! -perm -444 -exec \ |
| $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \ |
| || chmod -R a+r $(DistDir) ; \ |
| fi |
| |
| # This is invoked by distdir target, define it as a no-op to avoid errors if not |
| # defined by user. |
| dist-hook:: |
| |
| endif |
| |
| ############################################################################### |
| # TOP LEVEL - targets only to apply at the top level directory |
| ############################################################################### |
| |
| ifeq ($(LEVEL),.) |
| |
| #------------------------------------------------------------------------ |
| # Install support for the project's include files: |
| #------------------------------------------------------------------------ |
| install-local:: |
| $(Echo) Installing include files |
| $(Verb) $(MKDIR) $(includedir) |
| $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \ |
| cd $(BUILD_SRC_ROOT)/include && \ |
| find . -path '*/Internal' -prune -o '(' -type f \ |
| '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \ |
| -print ')' | grep -v CVS | pax -rwdvpe $(includedir) ; \ |
| fi |
| |
| uninstall-local:: |
| $(Echo) Uninstalling include files |
| $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \ |
| cd $(BUILD_SRC_ROOT)/include && \ |
| $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \ |
| '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \ |
| -print ')' | grep -v CVS | sed 's#^#$(includedir)/#'` ; \ |
| fi |
| |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Print out the directories used for building |
| #------------------------------------------------------------------------ |
| printvars:: |
| $(Echo) "BuildMode : " '$(BuildMode)' |
| $(Echo) "BUILD_SRC_ROOT : " '$(BUILD_SRC_ROOT)' |
| $(Echo) "BUILD_SRC_DIR : " '$(BUILD_SRC_DIR)' |
| $(Echo) "BUILD_OBJ_ROOT : " '$(BUILD_OBJ_ROOT)' |
| $(Echo) "BUILD_OBJ_DIR : " '$(BUILD_OBJ_DIR)' |
| $(Echo) "LLVM_SRC_ROOT : " '$(LLVM_SRC_ROOT)' |
| $(Echo) "LLVM_OBJ_ROOT : " '$(LLVM_OBJ_ROOT)' |
| $(Echo) "libdir : " '$(libdir)' |
| $(Echo) "bindir : " '$(bindir)' |
| $(Echo) "sysconfdir : " '$(sysconfdir)' |
| $(Echo) "bytecode_libdir: " '$(bytecode_libdir)' |
| $(Echo) "UserTargets : " '$(UserTargets)' |
| $(Echo) "ObjMakefiles : " '$(ObjMakefiles)' |
| $(Echo) "SrcMakefiles : " '$(SrcMakefiles)' |
| $(Echo) "ObjDir : " '$(ObjDir)' |
| $(Echo) "LibDir : " '$(LibDir)' |
| $(Echo) "ToolDir : " '$(ToolDir)' |
| $(Echo) "ExmplDir : " '$(ExmplDir)' |
| $(Echo) "Sources : " '$(Sources)' |
| $(Echo) "TDFiles : " '$(TDFiles)' |
| $(Echo) "INCFiles : " '$(INCFiles)' |
| $(Echo) "Compile.CXX : " '$(Compile.CXX)' |
| $(Echo) "Compile.C : " '$(Compile.C)' |
| $(Echo) "Archive : " '$(Archive)' |
| $(Echo) "YaccFiles : " '$(YaccFiles)' |
| $(Echo) "LexFiles : " '$(LexFiles)' |
| $(Echo) "Module : " '$(Module)' |