| #===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# |
| # |
| # The LLVM Compiler Infrastructure |
| # |
| # This file was developed by the LLVM research group and is distributed under |
| # the University of Illinois Open Source License. See LICENSE.TXT for details. |
| # |
| #===------------------------------------------------------------------------===# |
| # |
| # This file is included by Makefile.common. It defines paths and other |
| # values specific to a particular installation of LLVM. |
| # |
| #===------------------------------------------------------------------------===# |
| |
| # Define LLVM speific info and directories |
| PACKAGE_NAME := @PACKAGE_NAME@ |
| PACKAGE_VERSION := @PACKAGE_VERSION@ |
| LLVM_PREFIX := @LLVM_PREFIX@ |
| LLVM_BINDIR := @LLVM_BINDIR@ |
| LLVM_LIBDIR := @LLVM_LIBDIR@ |
| LLVM_DATADIR := @LLVM_DATADIR@ |
| LLVM_DOCSDIR := @LLVM_DOCSDIR@ |
| LLVM_ETCDIR := @LLVM_ETCDIR@ |
| LLVM_INCLUDEDIR := @LLVM_INCLUDEDIR@ |
| LLVM_INFODIR := @LLVM_INFODIR@ |
| LLVM_MANDIR := @LLVM_MANDIR@ |
| LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ |
| LLVM_TARBALL_NAME := @PACKAGE_NAME@-@PACKAGE_VERSION@ |
| |
| # Target operating system for which LLVM will be compiled. |
| OS=@OS@ |
| |
| # Target hardware architecture |
| ARCH=@ARCH@ |
| |
| # Target triple (cpu-vendor-os) for which we should generate code |
| TARGET_TRIPLE=@target@ |
| |
| # Endian-ness of the target |
| ENDIAN=@ENDIAN@ |
| |
| # Path to the C++ compiler to use. This is an optional setting, which defaults |
| # to whatever your gmake defaults to. |
| CXX = @CXX@ |
| |
| # Path to the CC binary, which use used by testcases for native builds. |
| CC := @CC@ |
| |
| # Linker flags. |
| LDFLAGS+=@LDFLAGS@ |
| |
| # Libraries needed by tools |
| TOOLLINKOPTS=@LIBS@ |
| |
| # Path to the library archiver program. |
| AR_PATH = @AR@ |
| |
| # The pathnames of the programs we require to build |
| BISON := @BISON@ |
| DATE := @DATE@ |
| FIND := @FIND@ |
| FLEX := @LEX@ |
| GREP := @GREP@ |
| INSTALL := @INSTALL@ |
| INSTALL_SH := $(BUILD_SRC_ROOT)/autoconf/install-sh |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| MKDIR := @abs_top_srcdir@/autoconf/mkinstalldirs |
| MV := @MV@ |
| PAX := @PAX@ |
| RANLIB := @RANLIB@ |
| RM := @RM@ |
| SED := @SED@ |
| TAR := @TAR@ |
| YACC := @YACC@ |
| |
| # Paths to miscellaneous programs we hope are present but might not be |
| BZIP2 := @BZIP2@ |
| DOT := @DOT@ |
| DOXYGEN := @DOXYGEN@ |
| ETAGS := @ETAGS@ |
| ETAGSFLAGS := @ETAGSFLAGS@ |
| GROFF := @GROFF@ |
| GZIP := @GZIP@ |
| POD2HTML := @POD2HTML@ |
| POD2MAN := @POD2MAN@ |
| PYTHON := @PYTHON@ |
| RUNTEST := @RUNTEST@ |
| ZIP := @ZIP@ |
| |
| # Paths to miscellaneous programs we assume are present |
| RPWD := pwd |
| ECHO := echo |
| # Determine the target for which LLVM should generate code. |
| LLVMGCCARCH := @target@/3.4-llvm |
| |
| # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries: |
| LCC1 = @LLVMCC1@ |
| LCC1XX = @LLVMCC1PLUS@ |
| |
| # Path to directory where object files should be stored during a build. |
| # Set OBJ_ROOT to "." if you do not want to use a separate place for |
| # object files. |
| OBJ_ROOT := . |
| |
| # Path to location for LLVM C/C++ front-end. You can modify this if you |
| # want to override the value set by configure. |
| LLVMGCCDIR := @LLVMGCCDIR@ |
| |
| # These are options that can either be enabled here, or can be enabled on the |
| # make command line (ie, make ENABLE_PROFILING=1): |
| |
| # When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are |
| # turned on, and Debug builds are turned off. |
| #ENABLE_OPTIMIZED = 1 |
| @ENABLE_OPTIMIZED@ |
| |
| # When ENABLE_PROFILING is enabled, the llvm source base is built with profile |
| # information to allow gprof to be used to get execution frequencies. |
| #ENABLE_PROFILING = 1 |
| |
| # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built |
| ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ |
| |
| # This option tells the Makefiles to produce verbose output. |
| # It essentially prints the commands that make is executing |
| #VERBOSE = 1 |
| |
| # Enable JIT for this platform |
| @JIT@ |
| |
| # Shared library extension for this platform. |
| SHLIBEXT = @SHLIBEXT@ |
| |
| # Executable file extension for this platform. |
| EXEEXT = @EXEEXT@ |
| |
| ########################################################################### |
| # Directory Configuration |
| # This section of the Makefile determines what is where. To be |
| # specific, there are several locations that need to be defined: |
| # |
| # o LLVM_SRC_ROOT : The root directory of the LLVM source code. |
| # o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. |
| # |
| # o BUILD_SRC_DIR : The directory containing the code to build. |
| # o BUILD_SRC_ROOT : The root directory of the code to build. |
| # |
| # o BUILD_OBJ_DIR : The directory in which compiled code will be placed. |
| # o BUILD_OBJ_ROOT : The root directory in which compiled code is placed. |
| # |
| ########################################################################### |
| |
| # Set the object build directory. By default, it is the current directory. |
| ifndef BUILD_OBJ_DIR |
| BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD))) |
| endif |
| |
| # Set the root of the object directory. |
| ifndef BUILD_OBJ_ROOT |
| BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD))) |
| endif |
| |
| # Set the source build directory. That is almost always the current directory. |
| ifndef BUILD_SRC_DIR |
| BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR))) |
| endif |
| |
| # Set the source root directory. |
| ifndef BUILD_SRC_ROOT |
| BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@) |
| endif |
| |
| # Set the LLVM object directory. |
| ifndef LLVM_OBJ_ROOT |
| ifdef LLVM_SRC_ROOT |
| LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD)) |
| else |
| LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT) |
| endif |
| endif |
| |
| # Set the LLVM source directory. |
| # It is typically the root directory of what we're compiling now. |
| ifndef LLVM_SRC_ROOT |
| LLVM_SRC_ROOT := $(BUILD_SRC_ROOT) |
| endif |
| |
| # Installation directories, as provided by the configure script. |
| abs_top_srcdir = @abs_top_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| exec_prefix = @exec_prefix@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| bindir = @bindir@ |
| sbindir = @sbindir@ |
| libexecdir = @libexecdir@ |
| datadir = @datadir@ |
| sysconfdir = @sysconfdir@ |
| sharedstatedir = @sharedstatedir@ |
| localstatedir = @localstatedir@ |
| libdir = @libdir@ |
| bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs |
| includedir = @includedir@ |
| infodir = @infodir@ |
| mandir = @mandir@ |