| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file defines the interfaces that NVPTX uses to lower LLVM code into a |
| // selection DAG. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| |
| #include "NVPTX.h" |
| #include "NVPTXISelLowering.h" |
| #include "NVPTXTargetMachine.h" |
| #include "NVPTXTargetObjectFile.h" |
| #include "NVPTXUtilities.h" |
| #include "llvm/Intrinsics.h" |
| #include "llvm/IntrinsicInst.h" |
| #include "llvm/Support/CommandLine.h" |
| #include "llvm/DerivedTypes.h" |
| #include "llvm/GlobalValue.h" |
| #include "llvm/Module.h" |
| #include "llvm/Function.h" |
| #include "llvm/CodeGen/Analysis.h" |
| #include "llvm/CodeGen/MachineFrameInfo.h" |
| #include "llvm/CodeGen/MachineFunction.h" |
| #include "llvm/CodeGen/MachineInstrBuilder.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/Support/CallSite.h" |
| #include "llvm/Support/ErrorHandling.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/raw_ostream.h" |
| #include "llvm/CodeGen/TargetLoweringObjectFileImpl.h" |
| #include "llvm/MC/MCSectionELF.h" |
| #include <sstream> |
| |
| #undef DEBUG_TYPE |
| #define DEBUG_TYPE "nvptx-lower" |
| |
| using namespace llvm; |
| |
| static unsigned int uniqueCallSite = 0; |
| |
| static cl::opt<bool> |
| RetainVectorOperands("nvptx-codegen-vectors", |
| cl::desc("NVPTX Specific: Retain LLVM's vectors and generate PTX vectors"), |
| cl::init(true)); |
| |
| static cl::opt<bool> |
| sched4reg("nvptx-sched4reg", |
| cl::desc("NVPTX Specific: schedule for register pressue"), |
| cl::init(false)); |
| |
| // NVPTXTargetLowering Constructor. |
| NVPTXTargetLowering::NVPTXTargetLowering(NVPTXTargetMachine &TM) |
| : TargetLowering(TM, new NVPTXTargetObjectFile()), |
| nvTM(&TM), |
| nvptxSubtarget(TM.getSubtarget<NVPTXSubtarget>()) { |
| |
| // always lower memset, memcpy, and memmove intrinsics to load/store |
| // instructions, rather |
| // then generating calls to memset, mempcy or memmove. |
| maxStoresPerMemset = (unsigned)0xFFFFFFFF; |
| maxStoresPerMemcpy = (unsigned)0xFFFFFFFF; |
| maxStoresPerMemmove = (unsigned)0xFFFFFFFF; |
| |
| setBooleanContents(ZeroOrNegativeOneBooleanContent); |
| |
| // Jump is Expensive. Don't create extra control flow for 'and', 'or' |
| // condition branches. |
| setJumpIsExpensive(true); |
| |
| // By default, use the Source scheduling |
| if (sched4reg) |
| setSchedulingPreference(Sched::RegPressure); |
| else |
| setSchedulingPreference(Sched::Source); |
| |
| addRegisterClass(MVT::i1, &NVPTX::Int1RegsRegClass); |
| addRegisterClass(MVT::i8, &NVPTX::Int8RegsRegClass); |
| addRegisterClass(MVT::i16, &NVPTX::Int16RegsRegClass); |
| addRegisterClass(MVT::i32, &NVPTX::Int32RegsRegClass); |
| addRegisterClass(MVT::i64, &NVPTX::Int64RegsRegClass); |
| addRegisterClass(MVT::f32, &NVPTX::Float32RegsRegClass); |
| addRegisterClass(MVT::f64, &NVPTX::Float64RegsRegClass); |
| |
| if (RetainVectorOperands) { |
| addRegisterClass(MVT::v2f32, &NVPTX::V2F32RegsRegClass); |
| addRegisterClass(MVT::v4f32, &NVPTX::V4F32RegsRegClass); |
| addRegisterClass(MVT::v2i32, &NVPTX::V2I32RegsRegClass); |
| addRegisterClass(MVT::v4i32, &NVPTX::V4I32RegsRegClass); |
| addRegisterClass(MVT::v2f64, &NVPTX::V2F64RegsRegClass); |
| addRegisterClass(MVT::v2i64, &NVPTX::V2I64RegsRegClass); |
| addRegisterClass(MVT::v2i16, &NVPTX::V2I16RegsRegClass); |
| addRegisterClass(MVT::v4i16, &NVPTX::V4I16RegsRegClass); |
| addRegisterClass(MVT::v2i8, &NVPTX::V2I8RegsRegClass); |
| addRegisterClass(MVT::v4i8, &NVPTX::V4I8RegsRegClass); |
| |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v4i32 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v4f32 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v4i16 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v4i8 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v2i64 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v2f64 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v2i32 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v2f32 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v2i16 , Custom); |
| setOperationAction(ISD::BUILD_VECTOR, MVT::v2i8 , Custom); |
| |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v4i32 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v4f32 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v4i16 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v4i8 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v2i64 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v2f64 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v2i32 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v2f32 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v2i16 , Custom); |
| setOperationAction(ISD::EXTRACT_SUBVECTOR, MVT::v2i8 , Custom); |
| } |
| |
| // Operations not directly supported by NVPTX. |
| setOperationAction(ISD::SELECT_CC, MVT::Other, Expand); |
| setOperationAction(ISD::BR_CC, MVT::Other, Expand); |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i64, Expand); |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i32, Expand); |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i16, Expand); |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i8 , Expand); |
| setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i1 , Expand); |
| |
| if (nvptxSubtarget.hasROT64()) { |
| setOperationAction(ISD::ROTL , MVT::i64, Legal); |
| setOperationAction(ISD::ROTR , MVT::i64, Legal); |
| } |
| else { |
| setOperationAction(ISD::ROTL , MVT::i64, Expand); |
| setOperationAction(ISD::ROTR , MVT::i64, Expand); |
| } |
| if (nvptxSubtarget.hasROT32()) { |
| setOperationAction(ISD::ROTL , MVT::i32, Legal); |
| setOperationAction(ISD::ROTR , MVT::i32, Legal); |
| } |
| else { |
| setOperationAction(ISD::ROTL , MVT::i32, Expand); |
| setOperationAction(ISD::ROTR , MVT::i32, Expand); |
| } |
| |
| setOperationAction(ISD::ROTL , MVT::i16, Expand); |
| setOperationAction(ISD::ROTR , MVT::i16, Expand); |
| setOperationAction(ISD::ROTL , MVT::i8, Expand); |
| setOperationAction(ISD::ROTR , MVT::i8, Expand); |
| setOperationAction(ISD::BSWAP , MVT::i16, Expand); |
| setOperationAction(ISD::BSWAP , MVT::i32, Expand); |
| setOperationAction(ISD::BSWAP , MVT::i64, Expand); |
| |
| // Indirect branch is not supported. |
| // This also disables Jump Table creation. |
| setOperationAction(ISD::BR_JT, MVT::Other, Expand); |
| setOperationAction(ISD::BRIND, MVT::Other, Expand); |
| |
| setOperationAction(ISD::GlobalAddress , MVT::i32 , Custom); |
| setOperationAction(ISD::GlobalAddress , MVT::i64 , Custom); |
| |
| // We want to legalize constant related memmove and memcopy |
| // intrinsics. |
| setOperationAction(ISD::INTRINSIC_W_CHAIN, MVT::Other, Custom); |
| |
| // Turn FP extload into load/fextend |
| setLoadExtAction(ISD::EXTLOAD, MVT::f32, Expand); |
| // Turn FP truncstore into trunc + store. |
| setTruncStoreAction(MVT::f64, MVT::f32, Expand); |
| |
| // PTX does not support load / store predicate registers |
| setOperationAction(ISD::LOAD, MVT::i1, Expand); |
| setLoadExtAction(ISD::SEXTLOAD, MVT::i1, Promote); |
| setLoadExtAction(ISD::ZEXTLOAD, MVT::i1, Promote); |
| setOperationAction(ISD::STORE, MVT::i1, Expand); |
| setTruncStoreAction(MVT::i64, MVT::i1, Expand); |
| setTruncStoreAction(MVT::i32, MVT::i1, Expand); |
| setTruncStoreAction(MVT::i16, MVT::i1, Expand); |
| setTruncStoreAction(MVT::i8, MVT::i1, Expand); |
| |
| // This is legal in NVPTX |
| setOperationAction(ISD::ConstantFP, MVT::f64, Legal); |
| setOperationAction(ISD::ConstantFP, MVT::f32, Legal); |
| |
| // TRAP can be lowered to PTX trap |
| setOperationAction(ISD::TRAP, MVT::Other, Legal); |
| |
| // By default, CONCAT_VECTORS is implemented via store/load |
| // through stack. It is slow and uses local memory. We need |
| // to custom-lowering them. |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v4i32 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v4f32 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v4i16 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v4i8 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v2i64 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v2f64 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v2i32 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v2f32 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v2i16 , Custom); |
| setOperationAction(ISD::CONCAT_VECTORS, MVT::v2i8 , Custom); |
| |
| // Expand vector int to float and float to int conversions |
| // - For SINT_TO_FP and UINT_TO_FP, the src type |
| // (Node->getOperand(0).getValueType()) |
| // is used to determine the action, while for FP_TO_UINT and FP_TO_SINT, |
| // the dest type (Node->getValueType(0)) is used. |
| // |
| // See VectorLegalizer::LegalizeOp() (LegalizeVectorOps.cpp) for the vector |
| // case, and |
| // SelectionDAGLegalize::LegalizeOp() (LegalizeDAG.cpp) for the scalar case. |
| // |
| // That is why v4i32 or v2i32 are used here. |
| // |
| // The expansion for vectors happens in VectorLegalizer::LegalizeOp() |
| // (LegalizeVectorOps.cpp). |
| setOperationAction(ISD::SINT_TO_FP, MVT::v4i32, Expand); |
| setOperationAction(ISD::SINT_TO_FP, MVT::v2i32, Expand); |
| setOperationAction(ISD::UINT_TO_FP, MVT::v4i32, Expand); |
| setOperationAction(ISD::UINT_TO_FP, MVT::v2i32, Expand); |
| setOperationAction(ISD::FP_TO_SINT, MVT::v2i32, Expand); |
| setOperationAction(ISD::FP_TO_SINT, MVT::v4i32, Expand); |
| setOperationAction(ISD::FP_TO_UINT, MVT::v2i32, Expand); |
| setOperationAction(ISD::FP_TO_UINT, MVT::v4i32, Expand); |
| |
| // Now deduce the information based on the above mentioned |
| // actions |
| computeRegisterProperties(); |
| } |
| |
| |
| const char *NVPTXTargetLowering::getTargetNodeName(unsigned Opcode) const { |
| switch (Opcode) { |
| default: return 0; |
| case NVPTXISD::CALL: return "NVPTXISD::CALL"; |
| case NVPTXISD::RET_FLAG: return "NVPTXISD::RET_FLAG"; |
| case NVPTXISD::Wrapper: return "NVPTXISD::Wrapper"; |
| case NVPTXISD::NVBuiltin: return "NVPTXISD::NVBuiltin"; |
| case NVPTXISD::DeclareParam: return "NVPTXISD::DeclareParam"; |
| case NVPTXISD::DeclareScalarParam: |
| return "NVPTXISD::DeclareScalarParam"; |
| case NVPTXISD::DeclareRet: return "NVPTXISD::DeclareRet"; |
| case NVPTXISD::DeclareRetParam: return "NVPTXISD::DeclareRetParam"; |
| case NVPTXISD::PrintCall: return "NVPTXISD::PrintCall"; |
| case NVPTXISD::LoadParam: return "NVPTXISD::LoadParam"; |
| case NVPTXISD::StoreParam: return "NVPTXISD::StoreParam"; |
| case NVPTXISD::StoreParamS32: return "NVPTXISD::StoreParamS32"; |
| case NVPTXISD::StoreParamU32: return "NVPTXISD::StoreParamU32"; |
| case NVPTXISD::MoveToParam: return "NVPTXISD::MoveToParam"; |
| case NVPTXISD::CallArgBegin: return "NVPTXISD::CallArgBegin"; |
| case NVPTXISD::CallArg: return "NVPTXISD::CallArg"; |
| case NVPTXISD::LastCallArg: return "NVPTXISD::LastCallArg"; |
| case NVPTXISD::CallArgEnd: return "NVPTXISD::CallArgEnd"; |
| case NVPTXISD::CallVoid: return "NVPTXISD::CallVoid"; |
| case NVPTXISD::CallVal: return "NVPTXISD::CallVal"; |
| case NVPTXISD::CallSymbol: return "NVPTXISD::CallSymbol"; |
| case NVPTXISD::Prototype: return "NVPTXISD::Prototype"; |
| case NVPTXISD::MoveParam: return "NVPTXISD::MoveParam"; |
| case NVPTXISD::MoveRetval: return "NVPTXISD::MoveRetval"; |
| case NVPTXISD::MoveToRetval: return "NVPTXISD::MoveToRetval"; |
| case NVPTXISD::StoreRetval: return "NVPTXISD::StoreRetval"; |
| case NVPTXISD::PseudoUseParam: return "NVPTXISD::PseudoUseParam"; |
| case NVPTXISD::RETURN: return "NVPTXISD::RETURN"; |
| case NVPTXISD::CallSeqBegin: return "NVPTXISD::CallSeqBegin"; |
| case NVPTXISD::CallSeqEnd: return "NVPTXISD::CallSeqEnd"; |
| } |
| } |
| |
| |
| SDValue |
| NVPTXTargetLowering::LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const { |
| DebugLoc dl = Op.getDebugLoc(); |
| const GlobalValue *GV = cast<GlobalAddressSDNode>(Op)->getGlobal(); |
| Op = DAG.getTargetGlobalAddress(GV, dl, getPointerTy()); |
| return DAG.getNode(NVPTXISD::Wrapper, dl, getPointerTy(), Op); |
| } |
| |
| std::string NVPTXTargetLowering::getPrototype(Type *retTy, |
| const ArgListTy &Args, |
| const SmallVectorImpl<ISD::OutputArg> &Outs, |
| unsigned retAlignment) const { |
| |
| bool isABI = (nvptxSubtarget.getSmVersion() >= 20); |
| |
| std::stringstream O; |
| O << "prototype_" << uniqueCallSite << " : .callprototype "; |
| |
| if (retTy->getTypeID() == Type::VoidTyID) |
| O << "()"; |
| else { |
| O << "("; |
| if (isABI) { |
| if (retTy->isPrimitiveType() || retTy->isIntegerTy()) { |
| unsigned size = 0; |
| if (const IntegerType *ITy = dyn_cast<IntegerType>(retTy)) { |
| size = ITy->getBitWidth(); |
| if (size < 32) size = 32; |
| } |
| else { |
| assert(retTy->isFloatingPointTy() && |
| "Floating point type expected here"); |
| size = retTy->getPrimitiveSizeInBits(); |
| } |
| |
| O << ".param .b" << size << " _"; |
| } |
| else if (isa<PointerType>(retTy)) |
| O << ".param .b" << getPointerTy().getSizeInBits() |
| << " _"; |
| else { |
| if ((retTy->getTypeID() == Type::StructTyID) || |
| isa<VectorType>(retTy)) { |
| SmallVector<EVT, 16> vtparts; |
| ComputeValueVTs(*this, retTy, vtparts); |
| unsigned totalsz = 0; |
| for (unsigned i=0,e=vtparts.size(); i!=e; ++i) { |
| unsigned elems = 1; |
| EVT elemtype = vtparts[i]; |
| if (vtparts[i].isVector()) { |
| elems = vtparts[i].getVectorNumElements(); |
| elemtype = vtparts[i].getVectorElementType(); |
| } |
| for (unsigned j=0, je=elems; j!=je; ++j) { |
| unsigned sz = elemtype.getSizeInBits(); |
| if (elemtype.isInteger() && (sz < 8)) sz = 8; |
| totalsz += sz/8; |
| } |
| } |
| O << ".param .align " |
| << retAlignment |
| << " .b8 _[" |
| << totalsz << "]"; |
| } |
| else { |
| assert(false && |
| "Unknown return type"); |
| } |
| } |
| } |
| else { |
| SmallVector<EVT, 16> vtparts; |
| ComputeValueVTs(*this, retTy, vtparts); |
| unsigned idx = 0; |
| for (unsigned i=0,e=vtparts.size(); i!=e; ++i) { |
| unsigned elems = 1; |
| EVT elemtype = vtparts[i]; |
| if (vtparts[i].isVector()) { |
| elems = vtparts[i].getVectorNumElements(); |
| elemtype = vtparts[i].getVectorElementType(); |
| } |
| |
| for (unsigned j=0, je=elems; j!=je; ++j) { |
| unsigned sz = elemtype.getSizeInBits(); |
| if (elemtype.isInteger() && (sz < 32)) sz = 32; |
| O << ".reg .b" << sz << " _"; |
| if (j<je-1) O << ", "; |
| ++idx; |
| } |
| if (i < e-1) |
| O << ", "; |
| } |
| } |
| O << ") "; |
| } |
| O << "_ ("; |
| |
| bool first = true; |
| MVT thePointerTy = getPointerTy(); |
| |
| for (unsigned i=0,e=Args.size(); i!=e; ++i) { |
| const Type *Ty = Args[i].Ty; |
| if (!first) { |
| O << ", "; |
| } |
| first = false; |
| |
| if (Outs[i].Flags.isByVal() == false) { |
| unsigned sz = 0; |
| if (isa<IntegerType>(Ty)) { |
| sz = cast<IntegerType>(Ty)->getBitWidth(); |
| if (sz < 32) sz = 32; |
| } |
| else if (isa<PointerType>(Ty)) |
| sz = thePointerTy.getSizeInBits(); |
| else |
| sz = Ty->getPrimitiveSizeInBits(); |
| if (isABI) |
| O << ".param .b" << sz << " "; |
| else |
| O << ".reg .b" << sz << " "; |
| O << "_"; |
| continue; |
| } |
| const PointerType *PTy = dyn_cast<PointerType>(Ty); |
| assert(PTy && |
| "Param with byval attribute should be a pointer type"); |
| Type *ETy = PTy->getElementType(); |
| |
| if (isABI) { |
| unsigned align = Outs[i].Flags.getByValAlign(); |
| unsigned sz = getDataLayout()->getTypeAllocSize(ETy); |
| O << ".param .align " << align |
| << " .b8 "; |
| O << "_"; |
| O << "[" << sz << "]"; |
| continue; |
| } |
| else { |
| SmallVector<EVT, 16> vtparts; |
| ComputeValueVTs(*this, ETy, vtparts); |
| for (unsigned i=0,e=vtparts.size(); i!=e; ++i) { |
| unsigned elems = 1; |
| EVT elemtype = vtparts[i]; |
| if (vtparts[i].isVector()) { |
| elems = vtparts[i].getVectorNumElements(); |
| elemtype = vtparts[i].getVectorElementType(); |
| } |
| |
| for (unsigned j=0,je=elems; j!=je; ++j) { |
| unsigned sz = elemtype.getSizeInBits(); |
| if (elemtype.isInteger() && (sz < 32)) sz = 32; |
| O << ".reg .b" << sz << " "; |
| O << "_"; |
| if (j<je-1) O << ", "; |
| } |
| if (i<e-1) |
| O << ", "; |
| } |
| continue; |
| } |
| } |
| O << ");"; |
| return O.str(); |
| } |
| |
| |
| SDValue |
| NVPTXTargetLowering::LowerCall(TargetLowering::CallLoweringInfo &CLI, |
| SmallVectorImpl<SDValue> &InVals) const { |
| SelectionDAG &DAG = CLI.DAG; |
| DebugLoc &dl = CLI.DL; |
| SmallVector<ISD::OutputArg, 32> &Outs = CLI.Outs; |
| SmallVector<SDValue, 32> &OutVals = CLI.OutVals; |
| SmallVector<ISD::InputArg, 32> &Ins = CLI.Ins; |
| SDValue Chain = CLI.Chain; |
| SDValue Callee = CLI.Callee; |
| bool &isTailCall = CLI.IsTailCall; |
| ArgListTy &Args = CLI.Args; |
| Type *retTy = CLI.RetTy; |
| ImmutableCallSite *CS = CLI.CS; |
| |
| bool isABI = (nvptxSubtarget.getSmVersion() >= 20); |
| |
| SDValue tempChain = Chain; |
| Chain = DAG.getCALLSEQ_START(Chain, |
| DAG.getIntPtrConstant(uniqueCallSite, true)); |
| SDValue InFlag = Chain.getValue(1); |
| |
| assert((Outs.size() == Args.size()) && |
| "Unexpected number of arguments to function call"); |
| unsigned paramCount = 0; |
| // Declare the .params or .reg need to pass values |
| // to the function |
| for (unsigned i=0, e=Outs.size(); i!=e; ++i) { |
| EVT VT = Outs[i].VT; |
| |
| if (Outs[i].Flags.isByVal() == false) { |
| // Plain scalar |
| // for ABI, declare .param .b<size> .param<n>; |
| // for nonABI, declare .reg .b<size> .param<n>; |
| unsigned isReg = 1; |
| if (isABI) |
| isReg = 0; |
| unsigned sz = VT.getSizeInBits(); |
| if (VT.isInteger() && (sz < 32)) sz = 32; |
| SDVTList DeclareParamVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue DeclareParamOps[] = { Chain, |
| DAG.getConstant(paramCount, MVT::i32), |
| DAG.getConstant(sz, MVT::i32), |
| DAG.getConstant(isReg, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(NVPTXISD::DeclareScalarParam, dl, DeclareParamVTs, |
| DeclareParamOps, 5); |
| InFlag = Chain.getValue(1); |
| SDVTList CopyParamVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue CopyParamOps[] = { Chain, DAG.getConstant(paramCount, MVT::i32), |
| DAG.getConstant(0, MVT::i32), OutVals[i], InFlag }; |
| |
| unsigned opcode = NVPTXISD::StoreParam; |
| if (isReg) |
| opcode = NVPTXISD::MoveToParam; |
| else { |
| if (Outs[i].Flags.isZExt()) |
| opcode = NVPTXISD::StoreParamU32; |
| else if (Outs[i].Flags.isSExt()) |
| opcode = NVPTXISD::StoreParamS32; |
| } |
| Chain = DAG.getNode(opcode, dl, CopyParamVTs, CopyParamOps, 5); |
| |
| InFlag = Chain.getValue(1); |
| ++paramCount; |
| continue; |
| } |
| // struct or vector |
| SmallVector<EVT, 16> vtparts; |
| const PointerType *PTy = dyn_cast<PointerType>(Args[i].Ty); |
| assert(PTy && |
| "Type of a byval parameter should be pointer"); |
| ComputeValueVTs(*this, PTy->getElementType(), vtparts); |
| |
| if (isABI) { |
| // declare .param .align 16 .b8 .param<n>[<size>]; |
| unsigned sz = Outs[i].Flags.getByValSize(); |
| SDVTList DeclareParamVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| // The ByValAlign in the Outs[i].Flags is alway set at this point, so we |
| // don't need to |
| // worry about natural alignment or not. See TargetLowering::LowerCallTo() |
| SDValue DeclareParamOps[] = { Chain, |
| DAG.getConstant(Outs[i].Flags.getByValAlign(), MVT::i32), |
| DAG.getConstant(paramCount, MVT::i32), |
| DAG.getConstant(sz, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(NVPTXISD::DeclareParam, dl, DeclareParamVTs, |
| DeclareParamOps, 5); |
| InFlag = Chain.getValue(1); |
| unsigned curOffset = 0; |
| for (unsigned j=0,je=vtparts.size(); j!=je; ++j) { |
| unsigned elems = 1; |
| EVT elemtype = vtparts[j]; |
| if (vtparts[j].isVector()) { |
| elems = vtparts[j].getVectorNumElements(); |
| elemtype = vtparts[j].getVectorElementType(); |
| } |
| for (unsigned k=0,ke=elems; k!=ke; ++k) { |
| unsigned sz = elemtype.getSizeInBits(); |
| if (elemtype.isInteger() && (sz < 8)) sz = 8; |
| SDValue srcAddr = DAG.getNode(ISD::ADD, dl, getPointerTy(), |
| OutVals[i], |
| DAG.getConstant(curOffset, |
| getPointerTy())); |
| SDValue theVal = DAG.getLoad(elemtype, dl, tempChain, srcAddr, |
| MachinePointerInfo(), false, false, false, 0); |
| SDVTList CopyParamVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue CopyParamOps[] = { Chain, DAG.getConstant(paramCount, |
| MVT::i32), |
| DAG.getConstant(curOffset, MVT::i32), |
| theVal, InFlag }; |
| Chain = DAG.getNode(NVPTXISD::StoreParam, dl, CopyParamVTs, |
| CopyParamOps, 5); |
| InFlag = Chain.getValue(1); |
| curOffset += sz/8; |
| } |
| } |
| ++paramCount; |
| continue; |
| } |
| // Non-abi, struct or vector |
| // Declare a bunch or .reg .b<size> .param<n> |
| unsigned curOffset = 0; |
| for (unsigned j=0,je=vtparts.size(); j!=je; ++j) { |
| unsigned elems = 1; |
| EVT elemtype = vtparts[j]; |
| if (vtparts[j].isVector()) { |
| elems = vtparts[j].getVectorNumElements(); |
| elemtype = vtparts[j].getVectorElementType(); |
| } |
| for (unsigned k=0,ke=elems; k!=ke; ++k) { |
| unsigned sz = elemtype.getSizeInBits(); |
| if (elemtype.isInteger() && (sz < 32)) sz = 32; |
| SDVTList DeclareParamVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue DeclareParamOps[] = { Chain, DAG.getConstant(paramCount, |
| MVT::i32), |
| DAG.getConstant(sz, MVT::i32), |
| DAG.getConstant(1, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(NVPTXISD::DeclareScalarParam, dl, DeclareParamVTs, |
| DeclareParamOps, 5); |
| InFlag = Chain.getValue(1); |
| SDValue srcAddr = DAG.getNode(ISD::ADD, dl, getPointerTy(), OutVals[i], |
| DAG.getConstant(curOffset, |
| getPointerTy())); |
| SDValue theVal = DAG.getLoad(elemtype, dl, tempChain, srcAddr, |
| MachinePointerInfo(), false, false, false, 0); |
| SDVTList CopyParamVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue CopyParamOps[] = { Chain, DAG.getConstant(paramCount, MVT::i32), |
| DAG.getConstant(0, MVT::i32), theVal, |
| InFlag }; |
| Chain = DAG.getNode(NVPTXISD::MoveToParam, dl, CopyParamVTs, |
| CopyParamOps, 5); |
| InFlag = Chain.getValue(1); |
| ++paramCount; |
| } |
| } |
| } |
| |
| GlobalAddressSDNode *Func = dyn_cast<GlobalAddressSDNode>(Callee.getNode()); |
| unsigned retAlignment = 0; |
| |
| // Handle Result |
| unsigned retCount = 0; |
| if (Ins.size() > 0) { |
| SmallVector<EVT, 16> resvtparts; |
| ComputeValueVTs(*this, retTy, resvtparts); |
| |
| // Declare one .param .align 16 .b8 func_retval0[<size>] for ABI or |
| // individual .reg .b<size> func_retval<0..> for non ABI |
| unsigned resultsz = 0; |
| for (unsigned i=0,e=resvtparts.size(); i!=e; ++i) { |
| unsigned elems = 1; |
| EVT elemtype = resvtparts[i]; |
| if (resvtparts[i].isVector()) { |
| elems = resvtparts[i].getVectorNumElements(); |
| elemtype = resvtparts[i].getVectorElementType(); |
| } |
| for (unsigned j=0,je=elems; j!=je; ++j) { |
| unsigned sz = elemtype.getSizeInBits(); |
| if (isABI == false) { |
| if (elemtype.isInteger() && (sz < 32)) sz = 32; |
| } |
| else { |
| if (elemtype.isInteger() && (sz < 8)) sz = 8; |
| } |
| if (isABI == false) { |
| SDVTList DeclareRetVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue DeclareRetOps[] = { Chain, DAG.getConstant(2, MVT::i32), |
| DAG.getConstant(sz, MVT::i32), |
| DAG.getConstant(retCount, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(NVPTXISD::DeclareRet, dl, DeclareRetVTs, |
| DeclareRetOps, 5); |
| InFlag = Chain.getValue(1); |
| ++retCount; |
| } |
| resultsz += sz; |
| } |
| } |
| if (isABI) { |
| if (retTy->isPrimitiveType() || retTy->isIntegerTy() || |
| retTy->isPointerTy() ) { |
| // Scalar needs to be at least 32bit wide |
| if (resultsz < 32) |
| resultsz = 32; |
| SDVTList DeclareRetVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue DeclareRetOps[] = { Chain, DAG.getConstant(1, MVT::i32), |
| DAG.getConstant(resultsz, MVT::i32), |
| DAG.getConstant(0, MVT::i32), InFlag }; |
| Chain = DAG.getNode(NVPTXISD::DeclareRet, dl, DeclareRetVTs, |
| DeclareRetOps, 5); |
| InFlag = Chain.getValue(1); |
| } |
| else { |
| if (Func) { // direct call |
| if (!llvm::getAlign(*(CS->getCalledFunction()), 0, retAlignment)) |
| retAlignment = getDataLayout()->getABITypeAlignment(retTy); |
| } else { // indirect call |
| const CallInst *CallI = dyn_cast<CallInst>(CS->getInstruction()); |
| if (!llvm::getAlign(*CallI, 0, retAlignment)) |
| retAlignment = getDataLayout()->getABITypeAlignment(retTy); |
| } |
| SDVTList DeclareRetVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue DeclareRetOps[] = { Chain, DAG.getConstant(retAlignment, |
| MVT::i32), |
| DAG.getConstant(resultsz/8, MVT::i32), |
| DAG.getConstant(0, MVT::i32), InFlag }; |
| Chain = DAG.getNode(NVPTXISD::DeclareRetParam, dl, DeclareRetVTs, |
| DeclareRetOps, 5); |
| InFlag = Chain.getValue(1); |
| } |
| } |
| } |
| |
| if (!Func) { |
| // This is indirect function call case : PTX requires a prototype of the |
| // form |
| // proto_0 : .callprototype(.param .b32 _) _ (.param .b32 _); |
| // to be emitted, and the label has to used as the last arg of call |
| // instruction. |
| // The prototype is embedded in a string and put as the operand for an |
| // INLINEASM SDNode. |
| SDVTList InlineAsmVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| std::string proto_string = getPrototype(retTy, Args, Outs, retAlignment); |
| const char *asmstr = nvTM->getManagedStrPool()-> |
| getManagedString(proto_string.c_str())->c_str(); |
| SDValue InlineAsmOps[] = { Chain, |
| DAG.getTargetExternalSymbol(asmstr, |
| getPointerTy()), |
| DAG.getMDNode(0), |
| DAG.getTargetConstant(0, MVT::i32), InFlag }; |
| Chain = DAG.getNode(ISD::INLINEASM, dl, InlineAsmVTs, InlineAsmOps, 5); |
| InFlag = Chain.getValue(1); |
| } |
| // Op to just print "call" |
| SDVTList PrintCallVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue PrintCallOps[] = { Chain, |
| DAG.getConstant(isABI ? ((Ins.size()==0) ? 0 : 1) |
| : retCount, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(Func?(NVPTXISD::PrintCallUni):(NVPTXISD::PrintCall), dl, |
| PrintCallVTs, PrintCallOps, 3); |
| InFlag = Chain.getValue(1); |
| |
| // Ops to print out the function name |
| SDVTList CallVoidVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue CallVoidOps[] = { Chain, Callee, InFlag }; |
| Chain = DAG.getNode(NVPTXISD::CallVoid, dl, CallVoidVTs, CallVoidOps, 3); |
| InFlag = Chain.getValue(1); |
| |
| // Ops to print out the param list |
| SDVTList CallArgBeginVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue CallArgBeginOps[] = { Chain, InFlag }; |
| Chain = DAG.getNode(NVPTXISD::CallArgBegin, dl, CallArgBeginVTs, |
| CallArgBeginOps, 2); |
| InFlag = Chain.getValue(1); |
| |
| for (unsigned i=0, e=paramCount; i!=e; ++i) { |
| unsigned opcode; |
| if (i==(e-1)) |
| opcode = NVPTXISD::LastCallArg; |
| else |
| opcode = NVPTXISD::CallArg; |
| SDVTList CallArgVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue CallArgOps[] = { Chain, DAG.getConstant(1, MVT::i32), |
| DAG.getConstant(i, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(opcode, dl, CallArgVTs, CallArgOps, 4); |
| InFlag = Chain.getValue(1); |
| } |
| SDVTList CallArgEndVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue CallArgEndOps[] = { Chain, |
| DAG.getConstant(Func ? 1 : 0, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(NVPTXISD::CallArgEnd, dl, CallArgEndVTs, CallArgEndOps, |
| 3); |
| InFlag = Chain.getValue(1); |
| |
| if (!Func) { |
| SDVTList PrototypeVTs = DAG.getVTList(MVT::Other, MVT::Glue); |
| SDValue PrototypeOps[] = { Chain, |
| DAG.getConstant(uniqueCallSite, MVT::i32), |
| InFlag }; |
| Chain = DAG.getNode(NVPTXISD::Prototype, dl, PrototypeVTs, PrototypeOps, 3); |
| InFlag = Chain.getValue(1); |
| } |
| |
| // Generate loads from param memory/moves from registers for result |
| if (Ins.size() > 0) { |
| if (isABI) { |
| unsigned resoffset = 0; |
| for (unsigned i=0,e=Ins.size(); i!=e; ++i) { |
| unsigned sz = Ins[i].VT.getSizeInBits(); |
| if (Ins[i].VT.isInteger() && (sz < 8)) sz = 8; |
| std::vector<EVT> LoadRetVTs; |
| LoadRetVTs.push_back(Ins[i].VT); |
| LoadRetVTs.push_back(MVT::Other); LoadRetVTs.push_back(MVT::Glue); |
| std::vector<SDValue> LoadRetOps; |
| LoadRetOps.push_back(Chain); |
| LoadRetOps.push_back(DAG.getConstant(1, MVT::i32)); |
| LoadRetOps.push_back(DAG.getConstant(resoffset, MVT::i32)); |
| LoadRetOps.push_back(InFlag); |
| SDValue retval = DAG.getNode(NVPTXISD::LoadParam, dl, LoadRetVTs, |
| &LoadRetOps[0], LoadRetOps.size()); |
| Chain = retval.getValue(1); |
| InFlag = retval.getValue(2); |
| InVals.push_back(retval); |
| resoffset += sz/8; |
| } |
| } |
| else { |
| SmallVector<EVT, 16> resvtparts; |
| ComputeValueVTs(*this, retTy, resvtparts); |
| |
| assert(Ins.size() == resvtparts.size() && |
| "Unexpected number of return values in non-ABI case"); |
| unsigned paramNum = 0; |
| for (unsigned i=0,e=Ins.size(); i!=e; ++i) { |
| assert(EVT(Ins[i].VT) == resvtparts[i] && |
| "Unexpected EVT type in non-ABI case"); |
| unsigned numelems = 1; |
| EVT elemtype = Ins[i].VT; |
| if (Ins[i].VT.isVector()) { |
| numelems = Ins[i].VT.getVectorNumElements(); |
| elemtype = Ins[i].VT.getVectorElementType(); |
| } |
| std::vector<SDValue> tempRetVals; |
| for (unsigned j=0; j<numelems; ++j) { |
| std::vector<EVT> MoveRetVTs; |
| MoveRetVTs.push_back(elemtype); |
| MoveRetVTs.push_back(MVT::Other); MoveRetVTs.push_back(MVT::Glue); |
| std::vector<SDValue> MoveRetOps; |
| MoveRetOps.push_back(Chain); |
| MoveRetOps.push_back(DAG.getConstant(0, MVT::i32)); |
| MoveRetOps.push_back(DAG.getConstant(paramNum, MVT::i32)); |
| MoveRetOps.push_back(InFlag); |
| SDValue retval = DAG.getNode(NVPTXISD::LoadParam, dl, MoveRetVTs, |
| &MoveRetOps[0], MoveRetOps.size()); |
| Chain = retval.getValue(1); |
| InFlag = retval.getValue(2); |
| tempRetVals.push_back(retval); |
| ++paramNum; |
| } |
| if (Ins[i].VT.isVector()) |
| InVals.push_back(DAG.getNode(ISD::BUILD_VECTOR, dl, Ins[i].VT, |
| &tempRetVals[0], tempRetVals.size())); |
| else |
| InVals.push_back(tempRetVals[0]); |
| } |
| } |
| } |
| Chain = DAG.getCALLSEQ_END(Chain, |
| DAG.getIntPtrConstant(uniqueCallSite, true), |
| DAG.getIntPtrConstant(uniqueCallSite+1, true), |
| InFlag); |
| uniqueCallSite++; |
| |
| // set isTailCall to false for now, until we figure out how to express |
| // tail call optimization in PTX |
| isTailCall = false; |
| return Chain; |
| } |
| |
| // By default CONCAT_VECTORS is lowered by ExpandVectorBuildThroughStack() |
| // (see LegalizeDAG.cpp). This is slow and uses local memory. |
| // We use extract/insert/build vector just as what LegalizeOp() does in llvm 2.5 |
| SDValue NVPTXTargetLowering:: |
| LowerCONCAT_VECTORS(SDValue Op, SelectionDAG &DAG) const { |
| SDNode *Node = Op.getNode(); |
| DebugLoc dl = Node->getDebugLoc(); |
| SmallVector<SDValue, 8> Ops; |
| unsigned NumOperands = Node->getNumOperands(); |
| for (unsigned i=0; i < NumOperands; ++i) { |
| SDValue SubOp = Node->getOperand(i); |
| EVT VVT = SubOp.getNode()->getValueType(0); |
| EVT EltVT = VVT.getVectorElementType(); |
| unsigned NumSubElem = VVT.getVectorNumElements(); |
| for (unsigned j=0; j < NumSubElem; ++j) { |
| Ops.push_back(DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, EltVT, SubOp, |
| DAG.getIntPtrConstant(j))); |
| } |
| } |
| return DAG.getNode(ISD::BUILD_VECTOR, dl, Node->getValueType(0), |
| &Ops[0], Ops.size()); |
| } |
| |
| SDValue NVPTXTargetLowering:: |
| LowerOperation(SDValue Op, SelectionDAG &DAG) const { |
| switch (Op.getOpcode()) { |
| case ISD::RETURNADDR: return SDValue(); |
| case ISD::FRAMEADDR: return SDValue(); |
| case ISD::GlobalAddress: return LowerGlobalAddress(Op, DAG); |
| case ISD::INTRINSIC_W_CHAIN: return Op; |
| case ISD::BUILD_VECTOR: |
| case ISD::EXTRACT_SUBVECTOR: |
| return Op; |
| case ISD::CONCAT_VECTORS: return LowerCONCAT_VECTORS(Op, DAG); |
| default: |
| llvm_unreachable("Custom lowering not defined for operation"); |
| } |
| } |
| |
| SDValue |
| NVPTXTargetLowering::getExtSymb(SelectionDAG &DAG, const char *inname, int idx, |
| EVT v) const { |
| std::string *name = nvTM->getManagedStrPool()->getManagedString(inname); |
| std::stringstream suffix; |
| suffix << idx; |
| *name += suffix.str(); |
| return DAG.getTargetExternalSymbol(name->c_str(), v); |
| } |
| |
| SDValue |
| NVPTXTargetLowering::getParamSymbol(SelectionDAG &DAG, int idx, EVT v) const { |
| return getExtSymb(DAG, ".PARAM", idx, v); |
| } |
| |
| SDValue |
| NVPTXTargetLowering::getParamHelpSymbol(SelectionDAG &DAG, int idx) { |
| return getExtSymb(DAG, ".HLPPARAM", idx); |
| } |
| |
| // Check to see if the kernel argument is image*_t or sampler_t |
| |
| bool llvm::isImageOrSamplerVal(const Value *arg, const Module *context) { |
| static const char *const specialTypes[] = { |
| "struct._image2d_t", |
| "struct._image3d_t", |
| "struct._sampler_t" |
| }; |
| |
| const Type *Ty = arg->getType(); |
| const PointerType *PTy = dyn_cast<PointerType>(Ty); |
| |
| if (!PTy) |
| return false; |
| |
| if (!context) |
| return false; |
| |
| const StructType *STy = dyn_cast<StructType>(PTy->getElementType()); |
| const std::string TypeName = STy ? STy->getName() : ""; |
| |
| for (int i = 0, e = array_lengthof(specialTypes); i != e; ++i) |
| if (TypeName == specialTypes[i]) |
| return true; |
| |
| return false; |
| } |
| |
| SDValue |
| NVPTXTargetLowering::LowerFormalArguments(SDValue Chain, |
| CallingConv::ID CallConv, bool isVarArg, |
| const SmallVectorImpl<ISD::InputArg> &Ins, |
| DebugLoc dl, SelectionDAG &DAG, |
| SmallVectorImpl<SDValue> &InVals) const { |
| MachineFunction &MF = DAG.getMachineFunction(); |
| const DataLayout *TD = getDataLayout(); |
| |
| const Function *F = MF.getFunction(); |
| const AttrListPtr &PAL = F->getAttributes(); |
| |
| SDValue Root = DAG.getRoot(); |
| std::vector<SDValue> OutChains; |
| |
| bool isKernel = llvm::isKernelFunction(*F); |
| bool isABI = (nvptxSubtarget.getSmVersion() >= 20); |
| |
| std::vector<Type *> argTypes; |
| std::vector<const Argument *> theArgs; |
| for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end(); |
| I != E; ++I) { |
| theArgs.push_back(I); |
| argTypes.push_back(I->getType()); |
| } |
| assert(argTypes.size() == Ins.size() && |
| "Ins types and function types did not match"); |
| |
| int idx = 0; |
| for (unsigned i=0, e=Ins.size(); i!=e; ++i, ++idx) { |
| Type *Ty = argTypes[i]; |
| EVT ObjectVT = getValueType(Ty); |
| assert(ObjectVT == Ins[i].VT && |
| "Ins type did not match function type"); |
| |
| // If the kernel argument is image*_t or sampler_t, convert it to |
| // a i32 constant holding the parameter position. This can later |
| // matched in the AsmPrinter to output the correct mangled name. |
| if (isImageOrSamplerVal(theArgs[i], |
| (theArgs[i]->getParent() ? |
| theArgs[i]->getParent()->getParent() : 0))) { |
| assert(isKernel && "Only kernels can have image/sampler params"); |
| InVals.push_back(DAG.getConstant(i+1, MVT::i32)); |
| continue; |
| } |
| |
| if (theArgs[i]->use_empty()) { |
| // argument is dead |
| InVals.push_back(DAG.getNode(ISD::UNDEF, dl, ObjectVT)); |
| continue; |
| } |
| |
| // In the following cases, assign a node order of "idx+1" |
| // to newly created nodes. The SDNOdes for params have to |
| // appear in the same order as their order of appearance |
| // in the original function. "idx+1" holds that order. |
| if (PAL.getParamAttributes(i+1).hasAttribute(Attributes::ByVal) == false) { |
| // A plain scalar. |
| if (isABI || isKernel) { |
| // If ABI, load from the param symbol |
| SDValue Arg = getParamSymbol(DAG, idx); |
| Value *srcValue = new Argument(PointerType::get(ObjectVT.getTypeForEVT( |
| F->getContext()), |
| llvm::ADDRESS_SPACE_PARAM)); |
| SDValue p = DAG.getLoad(ObjectVT, dl, Root, Arg, |
| MachinePointerInfo(srcValue), false, false, |
| false, |
| TD->getABITypeAlignment(ObjectVT.getTypeForEVT( |
| F->getContext()))); |
| if (p.getNode()) |
| DAG.AssignOrdering(p.getNode(), idx+1); |
| InVals.push_back(p); |
| } |
| else { |
| // If no ABI, just move the param symbol |
| SDValue Arg = getParamSymbol(DAG, idx, ObjectVT); |
| SDValue p = DAG.getNode(NVPTXISD::MoveParam, dl, ObjectVT, Arg); |
| if (p.getNode()) |
| DAG.AssignOrdering(p.getNode(), idx+1); |
| InVals.push_back(p); |
| } |
| continue; |
| } |
| |
| // Param has ByVal attribute |
| if (isABI || isKernel) { |
| // Return MoveParam(param symbol). |
| // Ideally, the param symbol can be returned directly, |
| // but when SDNode builder decides to use it in a CopyToReg(), |
| // machine instruction fails because TargetExternalSymbol |
| // (not lowered) is target dependent, and CopyToReg assumes |
| // the source is lowered. |
| SDValue Arg = getParamSymbol(DAG, idx, getPointerTy()); |
| SDValue p = DAG.getNode(NVPTXISD::MoveParam, dl, ObjectVT, Arg); |
| if (p.getNode()) |
| DAG.AssignOrdering(p.getNode(), idx+1); |
| if (isKernel) |
| InVals.push_back(p); |
| else { |
| SDValue p2 = DAG.getNode(ISD::INTRINSIC_WO_CHAIN, dl, ObjectVT, |
| DAG.getConstant(Intrinsic::nvvm_ptr_local_to_gen, MVT::i32), |
| p); |
| InVals.push_back(p2); |
| } |
| } else { |
| // Have to move a set of param symbols to registers and |
| // store them locally and return the local pointer in InVals |
| const PointerType *elemPtrType = dyn_cast<PointerType>(argTypes[i]); |
| assert(elemPtrType && |
| "Byval parameter should be a pointer type"); |
| Type *elemType = elemPtrType->getElementType(); |
| // Compute the constituent parts |
| SmallVector<EVT, 16> vtparts; |
| SmallVector<uint64_t, 16> offsets; |
| ComputeValueVTs(*this, elemType, vtparts, &offsets, 0); |
| unsigned totalsize = 0; |
| for (unsigned j=0, je=vtparts.size(); j!=je; ++j) |
| totalsize += vtparts[j].getStoreSizeInBits(); |
| SDValue localcopy = DAG.getFrameIndex(MF.getFrameInfo()-> |
| CreateStackObject(totalsize/8, 16, false), |
| getPointerTy()); |
| unsigned sizesofar = 0; |
| std::vector<SDValue> theChains; |
| for (unsigned j=0, je=vtparts.size(); j!=je; ++j) { |
| unsigned numElems = 1; |
| if (vtparts[j].isVector()) numElems = vtparts[j].getVectorNumElements(); |
| for (unsigned k=0, ke=numElems; k!=ke; ++k) { |
| EVT tmpvt = vtparts[j]; |
| if (tmpvt.isVector()) tmpvt = tmpvt.getVectorElementType(); |
| SDValue arg = DAG.getNode(NVPTXISD::MoveParam, dl, tmpvt, |
| getParamSymbol(DAG, idx, tmpvt)); |
| SDValue addr = DAG.getNode(ISD::ADD, dl, getPointerTy(), localcopy, |
| DAG.getConstant(sizesofar, getPointerTy())); |
| theChains.push_back(DAG.getStore(Chain, dl, arg, addr, |
| MachinePointerInfo(), false, false, 0)); |
| sizesofar += tmpvt.getStoreSizeInBits()/8; |
| ++idx; |
| } |
| } |
| --idx; |
| Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, &theChains[0], |
| theChains.size()); |
| InVals.push_back(localcopy); |
| } |
| } |
| |
| // Clang will check explicit VarArg and issue error if any. However, Clang |
| // will let code with |
| // implicit var arg like f() pass. |
| // We treat this case as if the arg list is empty. |
| //if (F.isVarArg()) { |
| // assert(0 && "VarArg not supported yet!"); |
| //} |
| |
| if (!OutChains.empty()) |
| DAG.setRoot(DAG.getNode(ISD::TokenFactor, dl, MVT::Other, |
| &OutChains[0], OutChains.size())); |
| |
| return Chain; |
| } |
| |
| SDValue |
| NVPTXTargetLowering::LowerReturn(SDValue Chain, CallingConv::ID CallConv, |
| bool isVarArg, |
| const SmallVectorImpl<ISD::OutputArg> &Outs, |
| const SmallVectorImpl<SDValue> &OutVals, |
| DebugLoc dl, SelectionDAG &DAG) const { |
| |
| bool isABI = (nvptxSubtarget.getSmVersion() >= 20); |
| |
| unsigned sizesofar = 0; |
| unsigned idx = 0; |
| for (unsigned i=0, e=Outs.size(); i!=e; ++i) { |
| SDValue theVal = OutVals[i]; |
| EVT theValType = theVal.getValueType(); |
| unsigned numElems = 1; |
| if (theValType.isVector()) numElems = theValType.getVectorNumElements(); |
| for (unsigned j=0,je=numElems; j!=je; ++j) { |
| SDValue tmpval = theVal; |
| if (theValType.isVector()) |
| tmpval = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, dl, |
| theValType.getVectorElementType(), |
| tmpval, DAG.getIntPtrConstant(j)); |
| Chain = DAG.getNode(isABI ? NVPTXISD::StoreRetval :NVPTXISD::MoveToRetval, |
| dl, MVT::Other, |
| Chain, |
| DAG.getConstant(isABI ? sizesofar : idx, MVT::i32), |
| tmpval); |
| if (theValType.isVector()) |
| sizesofar += theValType.getVectorElementType().getStoreSizeInBits()/8; |
| else |
| sizesofar += theValType.getStoreSizeInBits()/8; |
| ++idx; |
| } |
| } |
| |
| return DAG.getNode(NVPTXISD::RET_FLAG, dl, MVT::Other, Chain); |
| } |
| |
| void |
| NVPTXTargetLowering::LowerAsmOperandForConstraint(SDValue Op, |
| std::string &Constraint, |
| std::vector<SDValue> &Ops, |
| SelectionDAG &DAG) const |
| { |
| if (Constraint.length() > 1) |
| return; |
| else |
| TargetLowering::LowerAsmOperandForConstraint(Op, Constraint, Ops, DAG); |
| } |
| |
| // NVPTX suuport vector of legal types of any length in Intrinsics because the |
| // NVPTX specific type legalizer |
| // will legalize them to the PTX supported length. |
| bool |
| NVPTXTargetLowering::isTypeSupportedInIntrinsic(MVT VT) const { |
| if (isTypeLegal(VT)) |
| return true; |
| if (VT.isVector()) { |
| MVT eVT = VT.getVectorElementType(); |
| if (isTypeLegal(eVT)) |
| return true; |
| } |
| return false; |
| } |
| |
| |
| // llvm.ptx.memcpy.const and llvm.ptx.memmove.const need to be modeled as |
| // TgtMemIntrinsic |
| // because we need the information that is only available in the "Value" type |
| // of destination |
| // pointer. In particular, the address space information. |
| bool |
| NVPTXTargetLowering::getTgtMemIntrinsic(IntrinsicInfo& Info, const CallInst &I, |
| unsigned Intrinsic) const { |
| switch (Intrinsic) { |
| default: |
| return false; |
| |
| case Intrinsic::nvvm_atomic_load_add_f32: |
| Info.opc = ISD::INTRINSIC_W_CHAIN; |
| Info.memVT = MVT::f32; |
| Info.ptrVal = I.getArgOperand(0); |
| Info.offset = 0; |
| Info.vol = 0; |
| Info.readMem = true; |
| Info.writeMem = true; |
| Info.align = 0; |
| return true; |
| |
| case Intrinsic::nvvm_atomic_load_inc_32: |
| case Intrinsic::nvvm_atomic_load_dec_32: |
| Info.opc = ISD::INTRINSIC_W_CHAIN; |
| Info.memVT = MVT::i32; |
| Info.ptrVal = I.getArgOperand(0); |
| Info.offset = 0; |
| Info.vol = 0; |
| Info.readMem = true; |
| Info.writeMem = true; |
| Info.align = 0; |
| return true; |
| |
| case Intrinsic::nvvm_ldu_global_i: |
| case Intrinsic::nvvm_ldu_global_f: |
| case Intrinsic::nvvm_ldu_global_p: |
| |
| Info.opc = ISD::INTRINSIC_W_CHAIN; |
| if (Intrinsic == Intrinsic::nvvm_ldu_global_i) |
| Info.memVT = MVT::i32; |
| else if (Intrinsic == Intrinsic::nvvm_ldu_global_p) |
| Info.memVT = getPointerTy(); |
| else |
| Info.memVT = MVT::f32; |
| Info.ptrVal = I.getArgOperand(0); |
| Info.offset = 0; |
| Info.vol = 0; |
| Info.readMem = true; |
| Info.writeMem = false; |
| Info.align = 0; |
| return true; |
| |
| } |
| return false; |
| } |
| |
| /// isLegalAddressingMode - Return true if the addressing mode represented |
| /// by AM is legal for this target, for a load/store of the specified type. |
| /// Used to guide target specific optimizations, like loop strength reduction |
| /// (LoopStrengthReduce.cpp) and memory optimization for address mode |
| /// (CodeGenPrepare.cpp) |
| bool |
| NVPTXTargetLowering::isLegalAddressingMode(const AddrMode &AM, |
| Type *Ty) const { |
| |
| // AddrMode - This represents an addressing mode of: |
| // BaseGV + BaseOffs + BaseReg + Scale*ScaleReg |
| // |
| // The legal address modes are |
| // - [avar] |
| // - [areg] |
| // - [areg+immoff] |
| // - [immAddr] |
| |
| if (AM.BaseGV) { |
| if (AM.BaseOffs || AM.HasBaseReg || AM.Scale) |
| return false; |
| return true; |
| } |
| |
| switch (AM.Scale) { |
| case 0: // "r", "r+i" or "i" is allowed |
| break; |
| case 1: |
| if (AM.HasBaseReg) // "r+r+i" or "r+r" is not allowed. |
| return false; |
| // Otherwise we have r+i. |
| break; |
| default: |
| // No scale > 1 is allowed |
| return false; |
| } |
| return true; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // NVPTX Inline Assembly Support |
| //===----------------------------------------------------------------------===// |
| |
| /// getConstraintType - Given a constraint letter, return the type of |
| /// constraint it is for this target. |
| NVPTXTargetLowering::ConstraintType |
| NVPTXTargetLowering::getConstraintType(const std::string &Constraint) const { |
| if (Constraint.size() == 1) { |
| switch (Constraint[0]) { |
| default: |
| break; |
| case 'r': |
| case 'h': |
| case 'c': |
| case 'l': |
| case 'f': |
| case 'd': |
| case '0': |
| case 'N': |
| return C_RegisterClass; |
| } |
| } |
| return TargetLowering::getConstraintType(Constraint); |
| } |
| |
| |
| std::pair<unsigned, const TargetRegisterClass*> |
| NVPTXTargetLowering::getRegForInlineAsmConstraint(const std::string &Constraint, |
| EVT VT) const { |
| if (Constraint.size() == 1) { |
| switch (Constraint[0]) { |
| case 'c': |
| return std::make_pair(0U, &NVPTX::Int8RegsRegClass); |
| case 'h': |
| return std::make_pair(0U, &NVPTX::Int16RegsRegClass); |
| case 'r': |
| return std::make_pair(0U, &NVPTX::Int32RegsRegClass); |
| case 'l': |
| case 'N': |
| return std::make_pair(0U, &NVPTX::Int64RegsRegClass); |
| case 'f': |
| return std::make_pair(0U, &NVPTX::Float32RegsRegClass); |
| case 'd': |
| return std::make_pair(0U, &NVPTX::Float64RegsRegClass); |
| } |
| } |
| return TargetLowering::getRegForInlineAsmConstraint(Constraint, VT); |
| } |
| |
| |
| |
| /// getFunctionAlignment - Return the Log2 alignment of this function. |
| unsigned NVPTXTargetLowering::getFunctionAlignment(const Function *) const { |
| return 4; |
| } |