diff --git a/Makefile.rules b/Makefile.rules
index 0984dc0..13dbbdd 100644
--- a/Makefile.rules
+++ b/Makefile.rules
@@ -537,9 +537,6 @@
 else
   LLVM_CONFIG := $(LLVMToolDir)/llvm-config$(EXEEXT)
 endif
-ifndef LLVMLD
-LLVMLD    := $(LLVMToolDir)/llvm-ld$(EXEEXT)
-endif
 ifndef LLVMDIS
 LLVMDIS  := $(LLVMToolDir)/llvm-dis$(EXEEXT)
 endif
diff --git a/docs/Bugpoint.html b/docs/Bugpoint.html
index 5454ff4..9794f2c 100644
--- a/docs/Bugpoint.html
+++ b/docs/Bugpoint.html
@@ -44,9 +44,9 @@
 causes the crash, and reduce the file down to a small example which triggers the
 crash.</p>
 
-<p>For detailed case scenarios, such as debugging <tt>opt</tt>,
-<tt>llvm-ld</tt>, or one of the LLVM code generators, see <a
-href="HowToSubmitABug.html">How To Submit a Bug Report document</a>.</p>
+<p>For detailed case scenarios, such as debugging <tt>opt</tt>, or one of the
+LLVM code generators, see <a href="HowToSubmitABug.html">How To Submit a Bug
+Report document</a>.</p>
 
 </div>
 
diff --git a/docs/CommandGuide/index.html b/docs/CommandGuide/index.html
index 5db7020..772a59f 100644
--- a/docs/CommandGuide/index.html
+++ b/docs/CommandGuide/index.html
@@ -63,9 +63,6 @@
 <li><a href="/cmds/llvm-prof.html"><b>llvm-prof</b></a> -
     format raw `<tt>llvmprof.out</tt>' data into a human-readable report</li>
 
-<li><a href="/cmds/llvm-ld.html"><b>llvm-ld</b></a> -
-    general purpose linker with loadable runtime optimization support</li>
-
 <li><a href="/cmds/llvm-config.html"><b>llvm-config</b></a> -
     print out LLVM compilation options, libraries, etc. as configured</li>
 
diff --git a/docs/CommandGuide/llvm-ld.pod b/docs/CommandGuide/llvm-ld.pod
deleted file mode 100644
index efa9ebd..0000000
--- a/docs/CommandGuide/llvm-ld.pod
+++ /dev/null
@@ -1,234 +0,0 @@
-=pod
-
-=head1 NAME
-
-llvm-ld - LLVM linker
-
-=head1 SYNOPSIS
-
-B<llvm-ld> <options> <files>
-
-=head1 DESCRIPTION
-
-The B<llvm-ld> tool takes a set of LLVM bitcode files and links them
-together into a single LLVM bitcode file.  The output bitcode file can be
-another bitcode file or an executable bitcode program.  Using additional
-options, B<llvm-ld> is able to produce native code executables.
-
-The B<llvm-ld> tool is the main linker for LLVM. It is used to link together
-the output of LLVM front-end compilers and run "link time" optimizations (mostly
-the inter-procedural kind).
-
-The B<llvm-ld> tools attempts to mimic the interface provided by the default
-system linker so that it can act as a I<drop-in> replacement.
-
-=head2 Search Order
-
-When looking for objects specified on the command line, B<llvm-ld> will search 
-for the object first in the current directory and then in the directory 
-specified by the B<LLVM_LIB_SEARCH_PATH> environment variable.  If it cannot 
-find the object, it fails.
-
-When looking for a library specified with the B<-l> option, B<llvm-ld> first
-attempts to load a file with that name from the current directory.  If that
-fails, it looks for libI<library>.bc, libI<library>.a, or libI<library>.I<shared
-library extension>, in that order, in each directory added to the library search
-path with the B<-L> option.  These directories are searched in the order they
-are specified.  If the library cannot be located, then B<llvm-ld> looks in the
-directory specified by the B<LLVM_LIB_SEARCH_PATH> environment variable.  If it
-does not find a library there, it fails.
-
-The I<shared library extension> may be I<.so>, I<.dyld>, I<.dll>, or something
-different, depending upon the system.
-
-The B<-L> option is global.  It does not matter where it is specified in the
-list of command line arguments; the directory is simply added to the search path
-and is applied to all libraries, preceding or succeeding, in the command line.
-
-=head2 Link order
-
-All object and bitcode files are linked first in the order they were 
-specified on the command line.  All library files are linked next.  
-Some libraries may not be linked into the object program; see below.
-
-=head2 Library Linkage
-
-Object files and static bitcode objects are always linked into the output
-file.  Library archives (.a files) load only the objects within the archive
-that define symbols needed by the output file.  Hence, libraries should be
-listed after the object files and libraries which need them; otherwise, the
-library may not be linked in, and the dependent library will not have its
-undefined symbols defined.
-
-=head2 Native code generation
-
-The B<llvm-ld> program has limited support for native code generation, when
-using the B<-native> or B<-native-cbe> options. Native code generation is
-performed by converting the linked bitcode into native assembly (.s) or C code
-and running the system compiler (typically gcc) on the result.
-
-=head1 OPTIONS
-
-=head2 General Options
-
-=over 
-
-=item B<-help>
-
-Print a summary of command line options.
-
-=item B<-v>
-
-Specifies verbose mode. In this mode the linker will print additional
-information about the actions it takes, programs it executes, etc. 
-
-=item B<-stats>
-
-Print statistics.
-
-=item B<-time-passes>
-
-Record the amount of time needed for each pass and print it to standard
-error.
-
-=back 
-
-=head2 Input/Output Options
-
-=over
-
-=item B<-o> F<filename>
-
-This overrides the default output file and specifies the name of the file that
-should be generated by the linker. By default, B<llvm-ld> generates a file named
-F<a.out> for compatibility with B<ld>. The output will be written to
-F<filename>.
-
-=item B<-b> F<filename>
-
-This option can be used to override the output bitcode file name. By default, 
-the name of the bitcode output file is one more ".bc" suffix added to the name 
-specified by B<-o filename> option.
-
-=item B<-l>F<name>
-
-This option specifies the F<name> of a library to search when resolving symbols
-for the program. Only the base name should be specified as F<name>, without a
-F<lib> prefix or any suffix. 
-
-=item B<-L>F<Path>
-
-This option tells B<llvm-ld> to look in F<Path> to find any library subsequently
-specified with the B<-l> option. The paths will be searched in the order in
-which they are specified on the command line. If the library is still not found,
-a small set of system specific directories will also be searched. Note that
-libraries specified with the B<-l> option that occur I<before> any B<-L> options
-will not search the paths given by the B<-L> options following it.
-
-=item B<-link-as-library>
-
-Link the bitcode files together as a library, not an executable. In this mode,
-undefined symbols will be permitted.
-
-=item B<-r>
-
-An alias for -link-as-library.
-
-=item B<-native>
-
-Generate a native machine code executable.
-
-When generating native executables, B<llvm-ld> first checks for a bitcode
-version of the library and links it in, if necessary.  If the library is
-missing, B<llvm-ld> skips it.  Then, B<llvm-ld> links in the same
-libraries as native code.
-
-In this way, B<llvm-ld> should be able to link in optimized bitcode
-subsets of common libraries and then link in any part of the library that
-hasn't been converted to bitcode.
-
-=item B<-native-cbe>
-
-Generate a native machine code executable with the LLVM C backend.
-      
-This option is identical to the B<-native> option, but uses the
-C backend to generate code for the program instead of an LLVM native
-code generator.
-
-=back
-
-=head2 Optimization Options
-
-=over 
-
-=item B<-disable-inlining>
-
-Do not run the inlining pass. Functions will not be inlined into other
-functions.
-
-=item B<-disable-opt>
-
-Completely disable optimization.
-
-=item B<-disable-internalize>
-
-Do not mark all symbols as internal.
-
-=item B<-verify-each>
-
-Run the verification pass after each of the passes to verify intermediate
-results.
-
-=item B<-strip-all>
-
-Strip all debug and symbol information from the executable to make it smaller.
-
-=item B<-strip-debug>
-
-Strip all debug information from the executable to make it smaller.
-
-=item B<-s>
-
-An alias for B<-strip-all>.
-
-=item B<-S>
-
-An alias for B<-strip-debug>.
-
-=item B<-export-dynamic>
-
-An alias for B<-disable-internalize>
-
-=item B<-post-link-opt>F<Path>
-
-Run post-link optimization program. After linking is completed a bitcode file
-will be generated. It will be passed to the program specified by F<Path> as the
-first argument. The second argument to the program will be the name of a
-temporary file into which the program should place its optimized output. For
-example, the "no-op optimization" would be a simple shell script:
-
-    #!/bin/bash
-    cp $1 $2
-
-=back
-
-=head1 EXIT STATUS
-
-If B<llvm-ld> succeeds, it will exit with 0 return code.  If an error occurs,
-it will exit with a non-zero return code.
-
-=head1 ENVIRONMENT
-
-The C<LLVM_LIB_SEARCH_PATH> environment variable is used to find bitcode
-libraries. Any paths specified in this variable will be searched after the C<-L>
-options.
-
-=head1 SEE ALSO
-
-L<llvm-link|llvm-link>
-
-=head1 AUTHORS
-
-Maintained by the LLVM Team (L<http://llvm.org/>).
-
-=cut
diff --git a/docs/FAQ.html b/docs/FAQ.html
index 74e8534..2a46a9e 100644
--- a/docs/FAQ.html
+++ b/docs/FAQ.html
@@ -19,9 +19,6 @@
 <ol>
   <li><a href="#license">License</a>
   <ol>
-    <li>Why are the LLVM source code and the front-end distributed under
-        different licenses?</li>
-
     <li>Does the University of Illinois Open Source License really qualify as an
        "open source" license?</li>
 
@@ -72,8 +69,6 @@
     <li>After Subversion update, rebuilding gives the error "No rule to make
         target".</li>
 
-    <li><a href="#srcdir-objdir">When I compile LLVM-GCC with srcdir == objdir,
-        it fails. Why?</a></li>
   </ol></li>
 
   <li><a href="#felangs">Source Languages</a>
@@ -91,30 +86,17 @@
       instruction. Help!</a></li>
   </ol>
 
-  <li><a href="#cfe">Using the GCC Front End</a>
+  <li><a href="#cfe">Using the C and C++ Front Ends</a>
   <ol>
-    <li>When I compile software that uses a configure script, the configure
-        script thinks my system has all of the header files and libraries it is
-        testing for.  How do I get configure to work correctly?</li>
-
-    <li>When I compile code using the LLVM GCC front end, it complains that it
-        cannot find libcrtend.a?</li>
-
-    <li>How can I disable all optimizations when compiling code using the LLVM
-        GCC front end?</li>
-
-    <li><a href="#translatecxx">Can I use LLVM to convert C++ code to C
-        code?</a></li>
-
     <li><a href="#platformindependent">Can I compile C or C++ code to
         platform-independent LLVM bitcode?</a></li>
   </ol>
   </li>
 
-  <li><a href="#cfe_code">Questions about code generated by the GCC front-end</a>
+  <li><a href="#cfe_code">Questions about code generated by the demo page</a>
   <ol>
      <li><a href="#iosinit">What is this <tt>llvm.global_ctors</tt> and
-          <tt>_GLOBAL__I__tmp_webcompile...</tt> stuff that happens when I
+          <tt>_GLOBAL__I_a...</tt> stuff that happens when I
           #include &lt;iostream&gt;?</a></li>
 
      <li><a href="#codedce">Where did all of my code go??</a></li>
@@ -143,19 +125,6 @@
 <div>
 
 <div class="question">
-<p>Why are the LLVM source code and the front-end distributed under different
-   licenses?</p>
-</div>
-	
-<div class="answer">
-<p>The C/C++ front-ends are based on GCC and must be distributed under the GPL.
-   Our aim is to distribute LLVM source code under a <em>much less
-   restrictive</em> license, in particular one that does not compel users who
-   distribute tools based on modifying the source to redistribute the modified
-   source code as well.</p>
-</div>
-
-<div class="question">
 <p>Does the University of Illinois Open Source License really qualify as an
    "open source" license?</p>
 </div>
@@ -219,12 +188,9 @@
 <p>Some porting problems may exist in the following areas:</p>
 
 <ul>
-  <li>The GCC front end code is not as portable as the LLVM suite, so it may not
-      compile as well on unsupported platforms.</li>
-
-  <li>The LLVM build system relies heavily on UNIX shell tools, like the Bourne
-      Shell and sed.  Porting to systems without these tools (MacOS 9, Plan 9)
-      will require more effort.</li>
+  <li>The autoconf/makefile build system relies heavily on UNIX shell tools,
+      like the Bourne Shell and sed.  Porting to systems without these tools
+      (MacOS 9, Plan 9) Will require more effort.</li>
 </ul>
 
 </div>
@@ -256,7 +222,7 @@
 
 <div class="question">
 <p>The <tt>configure</tt> script finds the right C compiler, but it uses the
-   LLVM linker from a previous build.  What do I do?</p>
+   LLVM tools from a previous build.  What do I do?</p>
 </div>
 
 <div class="answer">
@@ -426,25 +392,6 @@
    rebuilding.</p>
 </div>
 
-<div class="question">
-<p><a name="srcdir-objdir">When I compile LLVM-GCC with srcdir == objdir, it
-   fails. Why?</a></p>
-</div>
-
-<div class="answer">
-<p>The <tt>GNUmakefile</tt> in the top-level directory of LLVM-GCC is a special
-   <tt>Makefile</tt> used by Apple to invoke the <tt>build_gcc</tt> script after
-   setting up a special environment. This has the unfortunate side-effect that
-   trying to build LLVM-GCC with srcdir == objdir in a "non-Apple way" invokes
-   the <tt>GNUmakefile</tt> instead of <tt>Makefile</tt>. Because the
-   environment isn't set up correctly to do this, the build fails.</p>
-
-<p>People not building LLVM-GCC the "Apple way" need to build LLVM-GCC with
-   srcdir != objdir, or simply remove the GNUmakefile entirely.</p>
-
-<p>We regret the inconvenience.</p>
-</div>
-
 </div>
 
 <!-- *********************************************************************** -->
@@ -460,12 +407,8 @@
 
 <div class="answer">
 <p>LLVM currently has full support for C and C++ source languages. These are
-   available through a special version of GCC that LLVM calls the
-   <a href="#cfe">C Front End</a></p>
-
-<p>There is an incomplete version of a Java front end available in the
-   <tt>java</tt> module. There is no documentation on this yet so you'll need to
-   download the code, compile it, and try it.</p>
+   available through both <a href="http://clang.llvm.org/">Clang</a> and
+   <a href="http://dragonegg.llvm.org/">DragonEgg</a>.</p>
 
 <p>The PyPy developers are working on integrating LLVM into the PyPy backend so
    that PyPy language can translate to LLVM.</p>
@@ -558,142 +501,12 @@
 
 <!-- *********************************************************************** -->
 <h2>
-  <a name="cfe">Using the GCC Front End</a>
+  <a name="cfe">Using the C and C++ Front Ends</a>
 </h2>
 
 <div>
 
 <div class="question">
-<p>When I compile software that uses a configure script, the configure script
-   thinks my system has all of the header files and libraries it is testing for.
-   How do I get configure to work correctly?</p>
-</div>
-
-<div class="answer">
-<p>The configure script is getting things wrong because the LLVM linker allows
-   symbols to be undefined at link time (so that they can be resolved during JIT
-   or translation to the C back end).  That is why configure thinks your system
-   "has everything."</p>
-
-<p>To work around this, perform the following steps:</p>
-
-<ol>
-  <li>Make sure the CC and CXX environment variables contains the full path to
-      the LLVM GCC front end.</li>
-
-  <li>Make sure that the regular C compiler is first in your PATH. </li>
-
-  <li>Add the string "-Wl,-native" to your CFLAGS environment variable.</li>
-</ol>
-
-<p>This will allow the <tt>llvm-ld</tt> linker to create a native code
-   executable instead of shell script that runs the JIT.  Creating native code
-   requires standard linkage, which in turn will allow the configure script to
-   find out if code is not linking on your system because the feature isn't
-   available on your system.</p>
-</div>
-
-<div class="question">
-<p>When I compile code using the LLVM GCC front end, it complains that it cannot
-   find libcrtend.a.
-</p>
-</div>
-
-<div class="answer">
-<p>The only way this can happen is if you haven't installed the runtime
-   library. To correct this, do:</p>
-
-<pre class="doc_code">
-% cd llvm/runtime
-% make clean ; make install-bytecode
-</pre>
-</div>
-
-<div class="question">
-<p>How can I disable all optimizations when compiling code using the LLVM GCC
-   front end?</p>
-</div>
-
-<div class="answer">
-<p>Passing "-Wa,-disable-opt -Wl,-disable-opt" will disable *all* cleanup and
-   optimizations done at the llvm level, leaving you with the truly horrible
-   code that you desire.</p>
-</div>
-
-
-<div class="question">
-<p><a name="translatecxx">Can I use LLVM to convert C++ code to C code?</a></p>
-</div>
-
-<div class="answer">
-<p>Yes, you can use LLVM to convert code from any language LLVM supports to C.
-   Note that the generated C code will be very low level (all loops are lowered
-   to gotos, etc) and not very pretty (comments are stripped, original source
-   formatting is totally lost, variables are renamed, expressions are
-   regrouped), so this may not be what you're looking for. Also, there are
-   several limitations noted below.<p>
-
-<p>Use commands like this:</p>
-
-<ol>
-  <li><p>Compile your program with llvm-g++:</p>
-
-<pre class="doc_code">
-% llvm-g++ -emit-llvm x.cpp -o program.bc -c
-</pre>
-
-      <p>or:</p>
-
-<pre class="doc_code">
-% llvm-g++ a.cpp -c -emit-llvm
-% llvm-g++ b.cpp -c -emit-llvm
-% llvm-ld a.o b.o -o program
-</pre>
-
-   <p>This will generate program and program.bc.  The .bc
-      file is the LLVM version of the program all linked together.</p></li>
-
-  <li><p>Convert the LLVM code to C code, using the LLC tool with the C
-      backend:</p>
-
-<pre class="doc_code">
-% llc -march=c program.bc -o program.c
-</pre></li>
-
-  <li><p>Finally, compile the C file:</p>
-
-<pre class="doc_code">
-% cc x.c -lstdc++
-</pre></li>
-
-</ol>
-
-<p>Using LLVM does not eliminate the need for C++ library support.  If you use
-   the llvm-g++ front-end, the generated code will depend on g++'s C++ support
-   libraries in the same way that code generated from g++ would.  If you use
-   another C++ front-end, the generated code will depend on whatever library
-   that front-end would normally require.</p>
-
-<p>If you are working on a platform that does not provide any C++ libraries, you
-   may be able to manually compile libstdc++ to LLVM bitcode, statically link it
-   into your program, then use the commands above to convert the whole result
-   into C code.  Alternatively, you might compile the libraries and your
-   application into two different chunks of C code and link them.</p>
-
-<p>Note that, by default, the C back end does not support exception handling.
-   If you want/need it for a certain program, you can enable it by passing
-   "-enable-correct-eh-support" to the llc program.  The resultant code will use
-   setjmp/longjmp to implement exception support that is relatively slow, and
-   not C++-ABI-conforming on most platforms, but otherwise correct.</p>
-
-<p>Also, there are a number of other limitations of the C backend that cause it
-   to produce code that does not fully conform to the C++ ABI on most
-   platforms. Some of the C++ programs in LLVM's test suite are known to fail
-   when compiled with the C back end because of ABI incompatibilities with
-   standard C++ libraries.</p>
-</div>
-
-<div class="question">
 <p><a name="platformindependent">Can I compile C or C++ code to
    platform-independent LLVM bitcode?</a></p>
 </div>
@@ -719,14 +532,14 @@
 
 <!-- *********************************************************************** -->
 <h2>
-  <a name="cfe_code">Questions about code generated by the GCC front-end</a>
+  <a name="cfe_code">Questions about code generated by the demo page</a>
 </h2>
 
 <div>
 
 <div class="question">
 <p><a name="iosinit">What is this <tt>llvm.global_ctors</tt> and
-   <tt>_GLOBAL__I__tmp_webcompile...</tt> stuff that happens when I <tt>#include
+   <tt>_GLOBAL__I_a...</tt> stuff that happens when I <tt>#include
    &lt;iostream&gt;</tt>?</a></p>
 </div>
 
diff --git a/docs/GettingStarted.html b/docs/GettingStarted.html
index 2bc17ea..561645f 100644
--- a/docs/GettingStarted.html
+++ b/docs/GettingStarted.html
@@ -1510,12 +1510,6 @@
   <dd>The disassembler transforms the LLVM bitcode to human readable 
   LLVM assembly.</dd>
 
-  <dt><tt><b>llvm-ld</b></tt></dt>
-  <dd><tt>llvm-ld</tt> is a general purpose and extensible linker for LLVM. 
-  It performs standard link time optimizations and allows optimization
-  modules to be loaded and run so that language specific optimizations can 
-  be applied at link time.</dd>
-
   <dt><tt><b>llvm-link</b></tt></dt>
   <dd><tt>llvm-link</tt>, not surprisingly, links multiple LLVM modules into 
   a single program.</dd>
diff --git a/docs/ReleaseNotes.html b/docs/ReleaseNotes.html
index 54cfa20..e5f3047 100644
--- a/docs/ReleaseNotes.html
+++ b/docs/ReleaseNotes.html
@@ -604,6 +604,7 @@
 <ul>
   <li>llvm-stress is a command line tool for generating random .ll files to fuzz
       different LLVM components. </li>
+  <li>llvm-ld has been removed.  Use llvm-link or Clang instead.</li>
   <li>....</li>
 </ul>
 
diff --git a/docs/tutorial/LangImpl4.html b/docs/tutorial/LangImpl4.html
index 77c9dbe..d2cac62 100644
--- a/docs/tutorial/LangImpl4.html
+++ b/docs/tutorial/LangImpl4.html
@@ -253,10 +253,9 @@
 <p>LLVM provides a wide variety of optimizations that can be used in certain
 circumstances.  Some <a href="../Passes.html">documentation about the various 
 passes</a> is available, but it isn't very complete.  Another good source of
-ideas can come from looking at the passes that <tt>llvm-gcc</tt> or
-<tt>llvm-ld</tt> run to get started.  The "<tt>opt</tt>" tool allows you to 
-experiment with passes from the command line, so you can see if they do
-anything.</p>
+ideas can come from looking at the passes that <tt>Clang</tt> runs to get
+started.  The "<tt>opt</tt>" tool allows you to experiment with passes from the
+command line, so you can see if they do anything.</p>
 
 <p>Now that we have reasonable code coming out of our front-end, lets talk about
 executing it!</p>
diff --git a/docs/tutorial/OCamlLangImpl4.html b/docs/tutorial/OCamlLangImpl4.html
index fd2b5ad..dd31ded 100644
--- a/docs/tutorial/OCamlLangImpl4.html
+++ b/docs/tutorial/OCamlLangImpl4.html
@@ -270,10 +270,9 @@
 <p>LLVM provides a wide variety of optimizations that can be used in certain
 circumstances.  Some <a href="../Passes.html">documentation about the various
 passes</a> is available, but it isn't very complete.  Another good source of
-ideas can come from looking at the passes that <tt>llvm-gcc</tt> or
-<tt>llvm-ld</tt> run to get started.  The "<tt>opt</tt>" tool allows you to
-experiment with passes from the command line, so you can see if they do
-anything.</p>
+ideas can come from looking at the passes that <tt>Clang</tt> runs to get
+started.  The "<tt>opt</tt>" tool allows you to experiment with passes from the
+command line, so you can see if they do anything.</p>
 
 <p>Now that we have reasonable code coming out of our front-end, lets talk about
 executing it!</p>
diff --git a/examples/BrainF/BrainFDriver.cpp b/examples/BrainF/BrainFDriver.cpp
index cdbf02a..58617b7 100644
--- a/examples/BrainF/BrainFDriver.cpp
+++ b/examples/BrainF/BrainFDriver.cpp
@@ -21,7 +21,6 @@
 // ./BrainF           prog.bf          #Write as BitCode
 //
 // lli prog.bf.bc                      #Run generated BitCode
-// llvm-ld -native -o=prog prog.bf.bc  #Compile BitCode into native executable
 //
 //===--------------------------------------------------------------------===//
 
diff --git a/projects/sample/Makefile.llvm.rules b/projects/sample/Makefile.llvm.rules
index 6e04724..c980d6b 100644
--- a/projects/sample/Makefile.llvm.rules
+++ b/projects/sample/Makefile.llvm.rules
@@ -463,9 +463,6 @@
   endif
 endif
 LLVM_CONFIG := $(LLVMToolDir)/llvm-config
-ifndef LLVMLD
-LLVMLD    := $(LLVMToolDir)/llvm-ld$(EXEEXT)
-endif
 ifndef LLVMDIS
 LLVMDIS  := $(LLVMToolDir)/llvm-dis$(EXEEXT)
 endif
diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt
index 8cebb7c..37af141 100644
--- a/test/CMakeLists.txt
+++ b/test/CMakeLists.txt
@@ -75,7 +75,7 @@
               UnitTests
               BugpointPasses LLVMHello
               llc lli llvm-ar llvm-as llvm-dis llvm-extract llvm-dwarfdump
-              llvm-ld llvm-link llvm-mc llvm-nm llvm-objdump llvm-readobj
+              llvm-link llvm-mc llvm-nm llvm-objdump llvm-readobj
               macho-dump opt
               FileCheck count not json-bench)
 set_target_properties(check.deps PROPERTIES FOLDER "Tests")
diff --git a/test/Linker/2008-03-07-DroppedSection_a.ll b/test/Linker/2008-03-07-DroppedSection_a.ll
index 4458971..ec9d5c2 100644
--- a/test/Linker/2008-03-07-DroppedSection_a.ll
+++ b/test/Linker/2008-03-07-DroppedSection_a.ll
@@ -1,6 +1,6 @@
 ; RUN: llvm-as < %s > %t.bc
 ; RUN: llvm-as < %p/2008-03-07-DroppedSection_b.ll > %t2.bc
-; RUN: llvm-ld -r -disable-opt %t.bc %t2.bc -o %t3.bc
+; RUN: llvm-link %t.bc %t2.bc -o %t3.bc
 ; RUN: llvm-dis < %t3.bc | grep ".data.init_task"
 
 ; ModuleID = 't.bc'
diff --git a/test/Linker/2008-03-07-DroppedSection_b.ll b/test/Linker/2008-03-07-DroppedSection_b.ll
index 884bf0a..63b64f6 100644
--- a/test/Linker/2008-03-07-DroppedSection_b.ll
+++ b/test/Linker/2008-03-07-DroppedSection_b.ll
@@ -1,6 +1,6 @@
 ; RUN: llvm-as < %s > %t.bc
 ; RUN: llvm-as < %p/2008-03-07-DroppedSection_a.ll > %t2.bc
-; RUN: llvm-ld -r -disable-opt %t.bc %t2.bc -o %t3.bc
+; RUN: llvm-link %t.bc %t2.bc -o %t3.bc
 ; RUN: llvm-dis < %t3.bc | grep ".data.init_task"
 
 ; ModuleID = 'u.bc'
diff --git a/test/Linker/link-archive.ll b/test/Linker/link-archive.ll
deleted file mode 100644
index 9251b4e..0000000
--- a/test/Linker/link-archive.ll
+++ /dev/null
@@ -1,16 +0,0 @@
-; Test linking of a bc file to an archive via llvm-ld. 
-; PR1434
-; RUN: rm -f %t.bar.a %t.foo.a
-; RUN: llvm-as %s -o %t.bar.bc
-; RUN: echo {define i32* @foo(i32 %x) \{ ret i32* @baz \} \
-; RUN:   @baz = external global i32 } | llvm-as -o %t.foo.bc
-; RUN: llvm-ar rcf %t.foo.a %t.foo.bc
-; RUN: llvm-ar rcf %t.bar.a %t.bar.bc
-; RUN: llvm-ld -disable-opt %t.bar.bc %t.foo.a -o %t.bc 
-; RUN: llvm-ld -disable-opt %t.foo.bc %t.bar.a -o %t.bc
-declare i32* @foo(...)
-define i32* @bar() {
-	%ret = call i32* (...)* @foo( i32 123 )
-	ret i32* %ret
-}
-@baz = global i32 0
diff --git a/test/Linker/link-messages.ll b/test/Linker/link-messages.ll
index 920782d..1faae18 100644
--- a/test/Linker/link-messages.ll
+++ b/test/Linker/link-messages.ll
@@ -2,10 +2,9 @@
 ; that error is printed out.
 ; RUN: llvm-as %s -o %t.one.bc
 ; RUN: llvm-as %s -o %t.two.bc
-; RUN: not llvm-ld -disable-opt -link-as-library %t.one.bc %t.two.bc \
-; RUN:   -o %t.bc 2>%t.err 
-; RUN: grep "symbol multiply defined" %t.err
+; RUN: not llvm-link %t.one.bc %t.two.bc -o %t.bc |& FileCheck %s
 
+; CHECK: symbol multiply defined
 define i32 @bar() {
-	ret i32 0
+  ret i32 0
 }
diff --git a/test/lit.cfg b/test/lit.cfg
index d74bc7b..2383d8f 100644
--- a/test/lit.cfg
+++ b/test/lit.cfg
@@ -187,12 +187,12 @@
                 r"\bllvm-bcanalyzer\b", r"\bllvm-config\b",
                 r"\bllvm-cov\b",        r"\bllvm-diff\b",
                 r"\bllvm-dis\b",        r"\bllvm-dwarfdump\b",
-                r"\bllvm-extract\b",    r"\bllvm-ld\b",
+                r"\bllvm-extract\b",
                 r"\bllvm-link\b",       r"\bllvm-mc\b",
                 r"\bllvm-nm\b",         r"\bllvm-objdump\b",
                 r"\bllvm-prof\b",       r"\bllvm-ranlib\b",
                 r"\bllvm-rtdyld\b",     r"\bllvm-shlib\b",
-                r"\bllvm-size\b",       r"\bllvm-stub\b",
+                r"\bllvm-size\b",
                 # Don't match '-llvmc'.
                 r"(?<!-)\bllvmc\b",     r"\blto\b",
                                         # Don't match '.opt', '-opt',
diff --git a/tools/CMakeLists.txt b/tools/CMakeLists.txt
index 9668c76..8294c5b 100644
--- a/tools/CMakeLists.txt
+++ b/tools/CMakeLists.txt
@@ -27,7 +27,6 @@
 add_subdirectory(llvm-nm)
 add_subdirectory(llvm-size)
 
-add_subdirectory(llvm-ld)
 add_subdirectory(llvm-cov)
 add_subdirectory(llvm-prof)
 add_subdirectory(llvm-link)
@@ -44,7 +43,6 @@
 add_subdirectory(bugpoint)
 add_subdirectory(bugpoint-passes)
 add_subdirectory(llvm-bcanalyzer)
-add_subdirectory(llvm-stub)
 add_subdirectory(llvm-stress)
 
 if( NOT WIN32 )
diff --git a/tools/LLVMBuild.txt b/tools/LLVMBuild.txt
index aba990f..df4aa9f 100644
--- a/tools/LLVMBuild.txt
+++ b/tools/LLVMBuild.txt
@@ -16,7 +16,7 @@
 ;===------------------------------------------------------------------------===;
 
 [common]
-subdirectories = bugpoint llc lli llvm-ar llvm-as llvm-bcanalyzer llvm-cov llvm-diff llvm-dis llvm-dwarfdump llvm-extract llvm-ld llvm-link llvm-mc llvm-nm llvm-objdump llvm-prof llvm-ranlib llvm-rtdyld llvm-size llvm-stub macho-dump opt
+subdirectories = bugpoint llc lli llvm-ar llvm-as llvm-bcanalyzer llvm-cov llvm-diff llvm-dis llvm-dwarfdump llvm-extract llvm-link llvm-mc llvm-nm llvm-objdump llvm-prof llvm-ranlib llvm-rtdyld llvm-size macho-dump opt
 
 [component_0]
 type = Group
diff --git a/tools/Makefile b/tools/Makefile
index 8bf091a..2b4b9b7 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -29,9 +29,9 @@
 DIRS := llvm-config
 PARALLEL_DIRS := opt llvm-as llvm-dis \
                  llc llvm-ranlib llvm-ar llvm-nm \
-                 llvm-ld llvm-prof llvm-link \
+                 llvm-prof llvm-link \
                  lli llvm-extract llvm-mc \
-                 bugpoint llvm-bcanalyzer llvm-stub \
+                 bugpoint llvm-bcanalyzer \
                  llvm-diff macho-dump llvm-objdump llvm-readobj \
 	         llvm-rtdyld llvm-dwarfdump llvm-cov \
 	         llvm-size llvm-stress
diff --git a/tools/llvm-ld/CMakeLists.txt b/tools/llvm-ld/CMakeLists.txt
deleted file mode 100644
index d328a04..0000000
--- a/tools/llvm-ld/CMakeLists.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-set(LLVM_LINK_COMPONENTS ipo scalaropts linker archive bitwriter vectorize)
-
-add_llvm_tool(llvm-ld
-  Optimize.cpp
-  llvm-ld.cpp
-  )
-
-add_dependencies(llvm-ld llvm-stub)
diff --git a/tools/llvm-ld/LLVMBuild.txt b/tools/llvm-ld/LLVMBuild.txt
deleted file mode 100644
index eed0452..0000000
--- a/tools/llvm-ld/LLVMBuild.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-;===- ./tools/llvm-ld/LLVMBuild.txt ----------------------------*- Conf -*--===;
-;
-;                     The LLVM Compiler Infrastructure
-;
-; This file is distributed under the University of Illinois Open Source
-; License. See LICENSE.TXT for details.
-;
-;===------------------------------------------------------------------------===;
-;
-; This is an LLVMBuild description file for the components in this subdirectory.
-;
-; For more information on the LLVMBuild system, please see:
-;
-;   http://llvm.org/docs/LLVMBuild.html
-;
-;===------------------------------------------------------------------------===;
-
-[component_0]
-type = Tool
-name = llvm-ld
-parent = Tools
-required_libraries = Archive BitWriter IPO Linker Scalar
diff --git a/tools/llvm-ld/Makefile b/tools/llvm-ld/Makefile
deleted file mode 100644
index 8793ca9..0000000
--- a/tools/llvm-ld/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-##===- tools/llvm-ld/Makefile ------------------------------*- Makefile -*-===##
-# 
-#                     The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-# 
-##===----------------------------------------------------------------------===##
-
-LEVEL := ../..
-TOOLNAME := llvm-ld
-LINK_COMPONENTS := ipo scalaropts linker archive bitwriter vectorize
-
-include $(LEVEL)/Makefile.common
diff --git a/tools/llvm-ld/Optimize.cpp b/tools/llvm-ld/Optimize.cpp
deleted file mode 100644
index 7f3f900..0000000
--- a/tools/llvm-ld/Optimize.cpp
+++ /dev/null
@@ -1,130 +0,0 @@
-//===- Optimize.cpp - Optimize a complete program -------------------------===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-//
-//===----------------------------------------------------------------------===//
-//
-// This file implements all optimization of the linked module for llvm-ld.
-//
-//===----------------------------------------------------------------------===//
-
-#include "llvm/Module.h"
-#include "llvm/PassManager.h"
-#include "llvm/Analysis/Verifier.h"
-#include "llvm/Support/CommandLine.h"
-#include "llvm/Support/raw_ostream.h"
-#include "llvm/Support/DynamicLibrary.h"
-#include "llvm/Target/TargetData.h"
-#include "llvm/Target/TargetMachine.h"
-#include "llvm/Support/PassNameParser.h"
-#include "llvm/Support/PluginLoader.h"
-#include "llvm/Transforms/IPO.h"
-#include "llvm/Transforms/IPO/PassManagerBuilder.h"
-#include "llvm/Transforms/Scalar.h"
-using namespace llvm;
-
-// Pass Name Options as generated by the PassNameParser
-static cl::list<const PassInfo*, bool, PassNameParser>
-  OptimizationList(cl::desc("Optimizations available:"));
-
-//Don't verify at the end
-static cl::opt<bool> DontVerify("disable-verify", cl::ReallyHidden);
-
-static cl::opt<bool> DisableInline("disable-inlining",
-  cl::desc("Do not run the inliner pass"));
-
-static cl::opt<bool>
-DisableOptimizations("disable-opt",
-  cl::desc("Do not run any optimization passes"));
-
-static cl::opt<bool> DisableInternalize("disable-internalize",
-  cl::desc("Do not mark all symbols as internal"));
-
-static cl::opt<bool> VerifyEach("verify-each",
- cl::desc("Verify intermediate results of all passes"));
-
-static cl::alias ExportDynamic("export-dynamic",
-  cl::aliasopt(DisableInternalize),
-  cl::desc("Alias for -disable-internalize"));
-
-static cl::opt<bool> Strip("strip-all", 
-  cl::desc("Strip all symbol info from executable"));
-
-static cl::alias A0("s", cl::desc("Alias for --strip-all"), 
-  cl::aliasopt(Strip));
-
-static cl::opt<bool> StripDebug("strip-debug",
-  cl::desc("Strip debugger symbol info from executable"));
-
-static cl::alias A1("S", cl::desc("Alias for --strip-debug"),
-  cl::aliasopt(StripDebug));
-
-// A utility function that adds a pass to the pass manager but will also add
-// a verifier pass after if we're supposed to verify.
-static inline void addPass(PassManager &PM, Pass *P) {
-  // Add the pass to the pass manager...
-  PM.add(P);
-
-  // If we are verifying all of the intermediate steps, add the verifier...
-  if (VerifyEach)
-    PM.add(createVerifierPass());
-}
-
-namespace llvm {
-/// Optimize - Perform link time optimizations. This will run the scalar
-/// optimizations, any loaded plugin-optimization modules, and then the
-/// inter-procedural optimizations if applicable.
-void Optimize(Module *M) {
-
-  // Instantiate the pass manager to organize the passes.
-  PassManager Passes;
-
-  // If we're verifying, start off with a verification pass.
-  if (VerifyEach)
-    Passes.add(createVerifierPass());
-
-  // Add an appropriate TargetData instance for this module...
-  addPass(Passes, new TargetData(M));
-
-  if (!DisableOptimizations)
-    PassManagerBuilder().populateLTOPassManager(Passes, !DisableInternalize,
-                                                !DisableInline);
-
-  // If the -s or -S command line options were specified, strip the symbols out
-  // of the resulting program to make it smaller.  -s and -S are GNU ld options
-  // that we are supporting; they alias -strip-all and -strip-debug.
-  if (Strip || StripDebug)
-    addPass(Passes, createStripSymbolsPass(StripDebug && !Strip));
-
-  // Create a new optimization pass for each one specified on the command line
-  std::auto_ptr<TargetMachine> target;
-  for (unsigned i = 0; i < OptimizationList.size(); ++i) {
-    const PassInfo *Opt = OptimizationList[i];
-    if (Opt->getNormalCtor())
-      addPass(Passes, Opt->getNormalCtor()());
-    else
-      errs() << "llvm-ld: cannot create pass: " << Opt->getPassName() 
-             << "\n";
-  }
-
-  // The user's passes may leave cruft around. Clean up after them them but
-  // only if we haven't got DisableOptimizations set
-  if (!DisableOptimizations) {
-    addPass(Passes, createInstructionCombiningPass());
-    addPass(Passes, createCFGSimplificationPass());
-    addPass(Passes, createAggressiveDCEPass());
-    addPass(Passes, createGlobalDCEPass());
-  }
-
-  // Make sure everything is still good.
-  if (!DontVerify)
-    Passes.add(createVerifierPass());
-
-  // Run our queue of passes all at once now, efficiently.
-  Passes.run(*M);
-}
-
-}
diff --git a/tools/llvm-ld/llvm-ld.cpp b/tools/llvm-ld/llvm-ld.cpp
deleted file mode 100644
index ecf0476..0000000
--- a/tools/llvm-ld/llvm-ld.cpp
+++ /dev/null
@@ -1,732 +0,0 @@
-//===- llvm-ld.cpp - LLVM 'ld' compatible linker --------------------------===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-//
-//===----------------------------------------------------------------------===//
-//
-// This utility is intended to be compatible with GCC, and follows standard
-// system 'ld' conventions.  As such, the default output file is ./a.out.
-// Additionally, this program outputs a shell script that is used to invoke LLI
-// to execute the program.  In this manner, the generated executable (a.out for
-// example), is directly executable, whereas the bitcode file actually lives in
-// the a.out.bc file generated by this program.
-//
-// Note that if someone (or a script) deletes the executable program generated,
-// the .bc file will be left around.  Considering that this is a temporary hack,
-// I'm not too worried about this.
-//
-//===----------------------------------------------------------------------===//
-
-#include "llvm/LinkAllVMCore.h"
-#include "llvm/Linker.h"
-#include "llvm/LLVMContext.h"
-#include "llvm/Support/Program.h"
-#include "llvm/Module.h"
-#include "llvm/PassManager.h"
-#include "llvm/Bitcode/ReaderWriter.h"
-#include "llvm/Target/TargetData.h"
-#include "llvm/Target/TargetMachine.h"
-#include "llvm/Support/CommandLine.h"
-#include "llvm/Support/FileUtilities.h"
-#include "llvm/Support/ManagedStatic.h"
-#include "llvm/Support/MemoryBuffer.h"
-#include "llvm/Support/PrettyStackTrace.h"
-#include "llvm/Support/SystemUtils.h"
-#include "llvm/Support/ToolOutputFile.h"
-#include "llvm/Support/Signals.h"
-#include <memory>
-#include <cstring>
-using namespace llvm;
-
-// Rightly this should go in a header file but it just seems such a waste.
-namespace llvm {
-extern void Optimize(Module*);
-}
-
-// Input/Output Options
-static cl::list<std::string> InputFilenames(cl::Positional, cl::OneOrMore,
-  cl::desc("<input bitcode files>"));
-
-static cl::opt<std::string> OutputFilename("o", cl::init("a.out"),
-  cl::desc("Override output filename"),
-  cl::value_desc("filename"));
-
-static cl::opt<std::string> BitcodeOutputFilename("b", cl::init(""),
-  cl::desc("Override bitcode output filename"),
-  cl::value_desc("filename"));
-
-static cl::opt<bool> Verbose("v",
-  cl::desc("Print information about actions taken"));
-
-static cl::list<std::string> LibPaths("L", cl::Prefix,
-  cl::desc("Specify a library search path"),
-  cl::value_desc("directory"));
-
-static cl::list<std::string> FrameworkPaths("F", cl::Prefix,
-  cl::desc("Specify a framework search path"),
-  cl::value_desc("directory"));
-
-static cl::list<std::string> Libraries("l", cl::Prefix,
-  cl::desc("Specify libraries to link to"),
-  cl::value_desc("library prefix"));
-
-static cl::list<std::string> Frameworks("framework",
-  cl::desc("Specify frameworks to link to"),
-  cl::value_desc("framework"));
-
-// Options to control the linking, optimization, and code gen processes
-static cl::opt<bool> LinkAsLibrary("link-as-library",
-  cl::desc("Link the .bc files together as a library, not an executable"));
-
-static cl::alias Relink("r", cl::aliasopt(LinkAsLibrary),
-  cl::desc("Alias for -link-as-library"));
-
-static cl::opt<bool> Native("native",
-  cl::desc("Generate a native binary instead of a shell script"));
-
-static cl::opt<bool>NativeCBE("native-cbe",
-  cl::desc("Generate a native binary with the C backend and GCC"));
-
-static cl::list<std::string> PostLinkOpts("post-link-opts",
-  cl::value_desc("path"),
-  cl::desc("Run one or more optimization programs after linking"));
-
-static cl::list<std::string> XLinker("Xlinker", cl::value_desc("option"),
-  cl::desc("Pass options to the system linker"));
-
-// Compatibility options that llvm-ld ignores but are supported for
-// compatibility with LD
-static cl::opt<std::string> CO3("soname", cl::Hidden,
-  cl::desc("Compatibility option: ignored"));
-
-static cl::opt<std::string> CO4("version-script", cl::Hidden,
-  cl::desc("Compatibility option: ignored"));
-
-static cl::opt<bool> CO5("eh-frame-hdr", cl::Hidden,
-  cl::desc("Compatibility option: ignored"));
-
-static  cl::opt<std::string> CO6("h", cl::Hidden,
-  cl::desc("Compatibility option: ignored"));
-
-static cl::opt<bool> CO7("start-group", cl::Hidden,
-  cl::desc("Compatibility option: ignored"));
-
-static cl::opt<bool> CO8("end-group", cl::Hidden,
-  cl::desc("Compatibility option: ignored"));
-
-static cl::opt<std::string> CO9("m", cl::Hidden,
-  cl::desc("Compatibility option: ignored"));
-
-/// This is just for convenience so it doesn't have to be passed around
-/// everywhere.
-static std::string progname;
-
-/// FileRemover objects to clean up output files in the event of an error.
-static FileRemover OutputRemover;
-static FileRemover BitcodeOutputRemover;
-
-/// PrintAndExit - Prints a message to standard error and exits with error code
-///
-/// Inputs:
-///  Message  - The message to print to standard error.
-///
-static void PrintAndExit(const std::string &Message, Module *M, int errcode = 1) {
-  errs() << progname << ": " << Message << "\n";
-  delete M;
-  llvm_shutdown();
-  exit(errcode);
-}
-
-static void PrintCommand(const std::vector<const char*> &args) {
-  std::vector<const char*>::const_iterator I = args.begin(), E = args.end();
-  for (; I != E; ++I)
-    if (*I)
-      errs() << "'" << *I << "'" << " ";
-  errs() << "\n";
-}
-
-/// CopyEnv - This function takes an array of environment variables and makes a
-/// copy of it.  This copy can then be manipulated any way the caller likes
-/// without affecting the process's real environment.
-///
-/// Inputs:
-///  envp - An array of C strings containing an environment.
-///
-/// Return value:
-///  NULL - An error occurred.
-///
-///  Otherwise, a pointer to a new array of C strings is returned.  Every string
-///  in the array is a duplicate of the one in the original array (i.e. we do
-///  not copy the char *'s from one array to another).
-///
-static char ** CopyEnv(char ** const envp) {
-  // Count the number of entries in the old list;
-  unsigned entries;   // The number of entries in the old environment list
-  for (entries = 0; envp[entries] != NULL; entries++)
-    /*empty*/;
-
-  // Add one more entry for the NULL pointer that ends the list.
-  ++entries;
-
-  // If there are no entries at all, just return NULL.
-  if (entries == 0)
-    return NULL;
-
-  // Allocate a new environment list.
-  char **newenv = new char* [entries];
-  if (newenv == NULL)
-    return NULL;
-
-  // Make a copy of the list.  Don't forget the NULL that ends the list.
-  entries = 0;
-  while (envp[entries] != NULL) {
-    size_t len = strlen(envp[entries]) + 1;
-    newenv[entries] = new char[len];
-    memcpy(newenv[entries], envp[entries], len);
-    ++entries;
-  }
-  newenv[entries] = NULL;
-
-  return newenv;
-}
-
-
-/// RemoveEnv - Remove the specified environment variable from the environment
-/// array.
-///
-/// Inputs:
-///  name - The name of the variable to remove.  It cannot be NULL.
-///  envp - The array of environment variables.  It cannot be NULL.
-///
-/// Notes:
-///  This is mainly done because functions to remove items from the environment
-///  are not available across all platforms.  In particular, Solaris does not
-///  seem to have an unsetenv() function or a setenv() function (or they are
-///  undocumented if they do exist).
-///
-static void RemoveEnv(const char * name, char ** const envp) {
-  for (unsigned index=0; envp[index] != NULL; index++) {
-    // Find the first equals sign in the array and make it an EOS character.
-    char *p = strchr (envp[index], '=');
-    if (p == NULL)
-      continue;
-    else
-      *p = '\0';
-
-    // Compare the two strings.  If they are equal, zap this string.
-    // Otherwise, restore it.
-    if (!strcmp(name, envp[index]))
-      *envp[index] = '\0';
-    else
-      *p = '=';
-  }
-
-  return;
-}
-
-/// GenerateBitcode - generates a bitcode file from the module provided
-void GenerateBitcode(Module* M, const std::string& FileName) {
-
-  if (Verbose)
-    errs() << "Generating Bitcode To " << FileName << '\n';
-
-  // Create the output file.
-  std::string ErrorInfo;
-  tool_output_file Out(FileName.c_str(), ErrorInfo,
-                       raw_fd_ostream::F_Binary);
-  if (!ErrorInfo.empty()) {
-    PrintAndExit(ErrorInfo, M);
-    return;
-  }
-
-  // Write it out
-  WriteBitcodeToFile(M, Out.os());
-  Out.keep();
-}
-
-/// GenerateAssembly - generates a native assembly language source file from the
-/// specified bitcode file.
-///
-/// Inputs:
-///  InputFilename  - The name of the input bitcode file.
-///  OutputFilename - The name of the file to generate.
-///  llc            - The pathname to use for LLC.
-///  envp           - The environment to use when running LLC.
-///
-/// Return non-zero value on error.
-///
-static int GenerateAssembly(const std::string &OutputFilename,
-                            const std::string &InputFilename,
-                            const sys::Path &llc,
-                            std::string &ErrMsg ) {
-  // Run LLC to convert the bitcode file into assembly code.
-  std::vector<const char*> args;
-  args.push_back(llc.c_str());
-  // We will use GCC to assemble the program so set the assembly syntax to AT&T,
-  // regardless of what the target in the bitcode file is.
-  args.push_back("-x86-asm-syntax=att");
-  args.push_back("-o");
-  args.push_back(OutputFilename.c_str());
-  args.push_back(InputFilename.c_str());
-  args.push_back(0);
-
-  if (Verbose) {
-    errs() << "Generating Assembly With: \n";
-    PrintCommand(args);
-  }
-
-  return sys::Program::ExecuteAndWait(llc, &args[0], 0, 0, 0, 0, &ErrMsg);
-}
-
-/// GenerateCFile - generates a C source file from the specified bitcode file.
-static int GenerateCFile(const std::string &OutputFile,
-                         const std::string &InputFile,
-                         const sys::Path &llc,
-                         std::string& ErrMsg) {
-  // Run LLC to convert the bitcode file into C.
-  std::vector<const char*> args;
-  args.push_back(llc.c_str());
-  args.push_back("-march=c");
-  args.push_back("-o");
-  args.push_back(OutputFile.c_str());
-  args.push_back(InputFile.c_str());
-  args.push_back(0);
-
-  if (Verbose) {
-    errs() << "Generating C Source With: \n";
-    PrintCommand(args);
-  }
-
-  return sys::Program::ExecuteAndWait(llc, &args[0], 0, 0, 0, 0, &ErrMsg);
-}
-
-/// GenerateNative - generates a native object file from the
-/// specified bitcode file.
-///
-/// Inputs:
-///  InputFilename   - The name of the input bitcode file.
-///  OutputFilename  - The name of the file to generate.
-///  NativeLinkItems - The native libraries, files, code with which to link
-///  LibPaths        - The list of directories in which to find libraries.
-///  FrameworksPaths - The list of directories in which to find frameworks.
-///  Frameworks      - The list of frameworks (dynamic libraries)
-///  gcc             - The pathname to use for GGC.
-///  envp            - A copy of the process's current environment.
-///
-/// Outputs:
-///  None.
-///
-/// Returns non-zero value on error.
-///
-static int GenerateNative(const std::string &OutputFilename,
-                          const std::string &InputFilename,
-                          const Linker::ItemList &LinkItems,
-                          const sys::Path &gcc, char ** const envp,
-                          std::string& ErrMsg) {
-  // Remove these environment variables from the environment of the
-  // programs that we will execute.  It appears that GCC sets these
-  // environment variables so that the programs it uses can configure
-  // themselves identically.
-  //
-  // However, when we invoke GCC below, we want it to use its normal
-  // configuration.  Hence, we must sanitize its environment.
-  char ** clean_env = CopyEnv(envp);
-  if (clean_env == NULL)
-    return 1;
-  RemoveEnv("LIBRARY_PATH", clean_env);
-  RemoveEnv("COLLECT_GCC_OPTIONS", clean_env);
-  RemoveEnv("GCC_EXEC_PREFIX", clean_env);
-  RemoveEnv("COMPILER_PATH", clean_env);
-  RemoveEnv("COLLECT_GCC", clean_env);
-
-
-  // Run GCC to assemble and link the program into native code.
-  //
-  // Note:
-  //  We can't just assemble and link the file with the system assembler
-  //  and linker because we don't know where to put the _start symbol.
-  //  GCC mysteriously knows how to do it.
-  std::vector<std::string> args;
-  args.push_back(gcc.c_str());
-  args.push_back("-fno-strict-aliasing");
-  args.push_back("-O3");
-  args.push_back("-o");
-  args.push_back(OutputFilename);
-  args.push_back(InputFilename);
-
-  // Add in the library and framework paths
-  for (unsigned index = 0; index < LibPaths.size(); index++) {
-    args.push_back("-L" + LibPaths[index]);
-  }
-  for (unsigned index = 0; index < FrameworkPaths.size(); index++) {
-    args.push_back("-F" + FrameworkPaths[index]);
-  }
-
-  // Add the requested options
-  for (unsigned index = 0; index < XLinker.size(); index++)
-    args.push_back(XLinker[index]);
-
-  // Add in the libraries to link.
-  for (unsigned index = 0; index < LinkItems.size(); index++)
-    if (LinkItems[index].first != "crtend") {
-      if (LinkItems[index].second)
-        args.push_back("-l" + LinkItems[index].first);
-      else
-        args.push_back(LinkItems[index].first);
-    }
-
-  // Add in frameworks to link.
-  for (unsigned index = 0; index < Frameworks.size(); index++) {
-    args.push_back("-framework");
-    args.push_back(Frameworks[index]);
-  }
-
-  // Now that "args" owns all the std::strings for the arguments, call the c_str
-  // method to get the underlying string array.  We do this game so that the
-  // std::string array is guaranteed to outlive the const char* array.
-  std::vector<const char *> Args;
-  for (unsigned i = 0, e = args.size(); i != e; ++i)
-    Args.push_back(args[i].c_str());
-  Args.push_back(0);
-
-  if (Verbose) {
-    errs() << "Generating Native Executable With:\n";
-    PrintCommand(Args);
-  }
-
-  // Run the compiler to assembly and link together the program.
-  int R = sys::Program::ExecuteAndWait(
-    gcc, &Args[0], const_cast<const char **>(clean_env), 0, 0, 0, &ErrMsg);
-  delete [] clean_env;
-  return R;
-}
-
-/// EmitShellScript - Output the wrapper file that invokes the JIT on the LLVM
-/// bitcode file for the program.
-static void EmitShellScript(char **argv, Module *M) {
-  if (Verbose)
-    errs() << "Emitting Shell Script\n";
-#if defined(_WIN32)
-  // Windows doesn't support #!/bin/sh style shell scripts in .exe files.  To
-  // support windows systems, we copy the llvm-stub.exe executable from the
-  // build tree to the destination file.
-  std::string ErrMsg;
-  sys::Path llvmstub = PrependMainExecutablePath("llvm-stub", argv[0],
-                                                 (void *)(intptr_t)&Optimize);
-  if (llvmstub.isEmpty())
-    PrintAndExit("Could not find llvm-stub.exe executable!", M);
-
-  if (0 != sys::CopyFile(sys::Path(OutputFilename), llvmstub, &ErrMsg))
-    PrintAndExit(ErrMsg, M);
-
-  return;
-#else
-
-  // Output the script to start the program...
-  std::string ErrorInfo;
-  tool_output_file Out2(OutputFilename.c_str(), ErrorInfo);
-  if (!ErrorInfo.empty())
-    PrintAndExit(ErrorInfo, M);
-
-  Out2.os() << "#!/bin/sh\n";
-  // Allow user to setenv LLVMINTERP if lli is not in their PATH.
-  Out2.os() << "lli=${LLVMINTERP-lli}\n";
-  Out2.os() << "exec $lli \\\n";
-  // gcc accepts -l<lib> and implicitly searches /lib and /usr/lib.
-  LibPaths.push_back("/lib");
-  LibPaths.push_back("/usr/lib");
-  LibPaths.push_back("/usr/X11R6/lib");
-  // We don't need to link in libc! In fact, /usr/lib/libc.so may not be a
-  // shared object at all! See RH 8: plain text.
-  std::vector<std::string>::iterator libc =
-    std::find(Libraries.begin(), Libraries.end(), "c");
-  if (libc != Libraries.end()) Libraries.erase(libc);
-  // List all the shared object (native) libraries this executable will need
-  // on the command line, so that we don't have to do this manually!
-  for (std::vector<std::string>::iterator i = Libraries.begin(),
-         e = Libraries.end(); i != e; ++i) {
-    // try explicit -L arguments first:
-    sys::Path FullLibraryPath;
-    for (cl::list<std::string>::const_iterator P = LibPaths.begin(),
-           E = LibPaths.end(); P != E; ++P) {
-      FullLibraryPath = *P;
-      FullLibraryPath.appendComponent("lib" + *i);
-      FullLibraryPath.appendSuffix(sys::Path::GetDLLSuffix());
-      if (!FullLibraryPath.isEmpty()) {
-        if (!FullLibraryPath.isDynamicLibrary()) {
-          // Not a native shared library; mark as invalid
-          FullLibraryPath = sys::Path();
-        } else break;
-      }
-    }
-    if (FullLibraryPath.isEmpty())
-      FullLibraryPath = sys::Path::FindLibrary(*i);
-    if (!FullLibraryPath.isEmpty())
-      Out2.os() << "    -load=" << FullLibraryPath.str() << " \\\n";
-  }
-  Out2.os() << "    "  << BitcodeOutputFilename << " ${1+\"$@\"}\n";
-  Out2.keep();
-#endif
-}
-
-// BuildLinkItems -- This function generates a LinkItemList for the LinkItems
-// linker function by combining the Files and Libraries in the order they were
-// declared on the command line.
-static void BuildLinkItems(
-  Linker::ItemList& Items,
-  const cl::list<std::string>& Files,
-  const cl::list<std::string>& Libraries) {
-
-  // Build the list of linkage items for LinkItems.
-
-  cl::list<std::string>::const_iterator fileIt = Files.begin();
-  cl::list<std::string>::const_iterator libIt  = Libraries.begin();
-
-  int libPos = -1, filePos = -1;
-  while ( libIt != Libraries.end() || fileIt != Files.end() ) {
-    if (libIt != Libraries.end())
-      libPos = Libraries.getPosition(libIt - Libraries.begin());
-    else
-      libPos = -1;
-    if (fileIt != Files.end())
-      filePos = Files.getPosition(fileIt - Files.begin());
-    else
-      filePos = -1;
-
-    if (filePos != -1 && (libPos == -1 || filePos < libPos)) {
-      // Add a source file
-      Items.push_back(std::make_pair(*fileIt++, false));
-    } else if (libPos != -1 && (filePos == -1 || libPos < filePos)) {
-      // Add a library
-      Items.push_back(std::make_pair(*libIt++, true));
-    }
-  }
-}
-
-int main(int argc, char **argv, char **envp) {
-  // Print a stack trace if we signal out.
-  sys::PrintStackTraceOnErrorSignal();
-  PrettyStackTraceProgram X(argc, argv);
-
-  LLVMContext &Context = getGlobalContext();
-  llvm_shutdown_obj Y;  // Call llvm_shutdown() on exit.
-
-  // Initialize passes
-  PassRegistry &Registry = *PassRegistry::getPassRegistry();
-  initializeCore(Registry);
-  initializeScalarOpts(Registry);
-  initializeIPO(Registry);
-  initializeAnalysis(Registry);
-  initializeIPA(Registry);
-  initializeTransformUtils(Registry);
-  initializeInstCombine(Registry);
-  initializeTarget(Registry);
-
-  // Initial global variable above for convenience printing of program name.
-  progname = sys::path::stem(argv[0]);
-
-  // Parse the command line options
-  cl::ParseCommandLineOptions(argc, argv, "llvm linker\n");
-
-#if defined(_WIN32) || defined(__CYGWIN__)
-  if (!LinkAsLibrary) {
-    // Default to "a.exe" instead of "a.out".
-    if (OutputFilename.getNumOccurrences() == 0)
-      OutputFilename = "a.exe";
-
-    // If there is no suffix add an "exe" one.
-    if (sys::path::extension(OutputFilename).empty())
-      OutputFilename.append(".exe");
-  }
-#endif
-
-  // Generate the bitcode for the optimized module.
-  // If -b wasn't specified, use the name specified
-  // with -o to construct BitcodeOutputFilename.
-  if (BitcodeOutputFilename.empty()) {
-    BitcodeOutputFilename = OutputFilename;
-    if (!LinkAsLibrary) BitcodeOutputFilename += ".bc";
-  }
-
-  // Arrange for the bitcode output file to be deleted on any errors.
-  BitcodeOutputRemover.setFile(BitcodeOutputFilename);
-  sys::RemoveFileOnSignal(sys::Path(BitcodeOutputFilename));
-
-  // Arrange for the output file to be deleted on any errors.
-  if (!LinkAsLibrary) {
-    OutputRemover.setFile(OutputFilename);
-    sys::RemoveFileOnSignal(sys::Path(OutputFilename));
-  }
-
-  // Construct a Linker (now that Verbose is set)
-  Linker TheLinker(progname, OutputFilename, Context, Verbose);
-
-  // Keep track of the native link items (versus the bitcode items)
-  Linker::ItemList NativeLinkItems;
-
-  // Add library paths to the linker
-  TheLinker.addPaths(LibPaths);
-  TheLinker.addSystemPaths();
-
-  // Remove any consecutive duplicates of the same library...
-  Libraries.erase(std::unique(Libraries.begin(), Libraries.end()),
-                  Libraries.end());
-
-  if (LinkAsLibrary) {
-    std::vector<sys::Path> Files;
-    for (unsigned i = 0; i < InputFilenames.size(); ++i )
-      Files.push_back(sys::Path(InputFilenames[i]));
-    if (TheLinker.LinkInFiles(Files))
-      return 1; // Error already printed
-
-    // The libraries aren't linked in but are noted as "dependent" in the
-    // module.
-    for (cl::list<std::string>::const_iterator I = Libraries.begin(),
-         E = Libraries.end(); I != E ; ++I) {
-      TheLinker.getModule()->addLibrary(*I);
-    }
-  } else {
-    // Build a list of the items from our command line
-    Linker::ItemList Items;
-    BuildLinkItems(Items, InputFilenames, Libraries);
-
-    // Link all the items together
-    if (TheLinker.LinkInItems(Items, NativeLinkItems) )
-      return 1; // Error already printed
-  }
-
-  std::auto_ptr<Module> Composite(TheLinker.releaseModule());
-
-  // Optimize the module
-  Optimize(Composite.get());
-
-  // Generate the bitcode output.
-  GenerateBitcode(Composite.get(), BitcodeOutputFilename);
-
-  // If we are not linking a library, generate either a native executable
-  // or a JIT shell script, depending upon what the user wants.
-  if (!LinkAsLibrary) {
-    // If the user wants to run a post-link optimization, run it now.
-    if (!PostLinkOpts.empty()) {
-      std::vector<std::string> opts = PostLinkOpts;
-      for (std::vector<std::string>::iterator I = opts.begin(),
-           E = opts.end(); I != E; ++I) {
-        sys::Path prog(*I);
-        if (!prog.canExecute()) {
-          prog = sys::Program::FindProgramByName(*I);
-          if (prog.isEmpty())
-            PrintAndExit(std::string("Optimization program '") + *I +
-                         "' is not found or not executable.", Composite.get());
-        }
-        // Get the program arguments
-        sys::Path tmp_output("opt_result");
-        std::string ErrMsg;
-        if (tmp_output.createTemporaryFileOnDisk(true, &ErrMsg))
-          PrintAndExit(ErrMsg, Composite.get());
-
-        const char* args[4];
-        args[0] = I->c_str();
-        args[1] = BitcodeOutputFilename.c_str();
-        args[2] = tmp_output.c_str();
-        args[3] = 0;
-        if (0 == sys::Program::ExecuteAndWait(prog, args, 0,0,0,0, &ErrMsg)) {
-          if (tmp_output.isBitcodeFile()) {
-            sys::Path target(BitcodeOutputFilename);
-            target.eraseFromDisk();
-            if (tmp_output.renamePathOnDisk(target, &ErrMsg))
-              PrintAndExit(ErrMsg, Composite.get(), 2);
-          } else
-            PrintAndExit("Post-link optimization output is not bitcode",
-                         Composite.get());
-        } else {
-          PrintAndExit(ErrMsg, Composite.get());
-        }
-      }
-    }
-
-    // If the user wants to generate a native executable, compile it from the
-    // bitcode file.
-    //
-    // Otherwise, create a script that will run the bitcode through the JIT.
-    if (Native) {
-      // Name of the Assembly Language output file
-      sys::Path AssemblyFile ( OutputFilename);
-      AssemblyFile.appendSuffix("s");
-
-      // Mark the output files for removal.
-      FileRemover AssemblyFileRemover(AssemblyFile.str());
-      sys::RemoveFileOnSignal(AssemblyFile);
-
-      // Determine the locations of the llc and gcc programs.
-      sys::Path llc = PrependMainExecutablePath("llc", argv[0],
-                                                (void *)(intptr_t)&Optimize);
-      if (llc.isEmpty())
-        PrintAndExit("Failed to find llc", Composite.get());
-
-      sys::Path gcc = sys::Program::FindProgramByName("gcc");
-      if (gcc.isEmpty())
-        PrintAndExit("Failed to find gcc", Composite.get());
-
-      // Generate an assembly language file for the bitcode.
-      std::string ErrMsg;
-      if (0 != GenerateAssembly(AssemblyFile.str(), BitcodeOutputFilename,
-          llc, ErrMsg))
-        PrintAndExit(ErrMsg, Composite.get());
-
-      if (0 != GenerateNative(OutputFilename, AssemblyFile.str(),
-                              NativeLinkItems, gcc, envp, ErrMsg))
-        PrintAndExit(ErrMsg, Composite.get());
-    } else if (NativeCBE) {
-      sys::Path CFile (OutputFilename);
-      CFile.appendSuffix("cbe.c");
-
-      // Mark the output files for removal.
-      FileRemover CFileRemover(CFile.str());
-      sys::RemoveFileOnSignal(CFile);
-
-      // Determine the locations of the llc and gcc programs.
-      sys::Path llc = PrependMainExecutablePath("llc", argv[0],
-                                                (void *)(intptr_t)&Optimize);
-      if (llc.isEmpty())
-        PrintAndExit("Failed to find llc", Composite.get());
-
-      sys::Path gcc = sys::Program::FindProgramByName("gcc");
-      if (gcc.isEmpty())
-        PrintAndExit("Failed to find gcc", Composite.get());
-
-      // Generate an assembly language file for the bitcode.
-      std::string ErrMsg;
-      if (GenerateCFile(CFile.str(), BitcodeOutputFilename, llc, ErrMsg))
-        PrintAndExit(ErrMsg, Composite.get());
-
-      if (GenerateNative(OutputFilename, CFile.str(),
-                         NativeLinkItems, gcc, envp, ErrMsg))
-        PrintAndExit(ErrMsg, Composite.get());
-    } else {
-      EmitShellScript(argv, Composite.get());
-    }
-
-    // Make the script executable...
-    std::string ErrMsg;
-    if (sys::Path(OutputFilename).makeExecutableOnDisk(&ErrMsg))
-      PrintAndExit(ErrMsg, Composite.get());
-
-    // Make the bitcode file readable and directly executable in LLEE as well
-    if (sys::Path(BitcodeOutputFilename).makeExecutableOnDisk(&ErrMsg))
-      PrintAndExit(ErrMsg, Composite.get());
-
-    if (sys::Path(BitcodeOutputFilename).makeReadableOnDisk(&ErrMsg))
-      PrintAndExit(ErrMsg, Composite.get());
-  }
-
-  // Operations which may fail are now complete.
-  BitcodeOutputRemover.releaseFile();
-  if (!LinkAsLibrary)
-    OutputRemover.releaseFile();
-
-  // Graceful exit
-  return 0;
-}
diff --git a/tools/llvm-stub/CMakeLists.txt b/tools/llvm-stub/CMakeLists.txt
deleted file mode 100644
index a98dc9e..0000000
--- a/tools/llvm-stub/CMakeLists.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-add_llvm_tool(llvm-stub
-  llvm-stub.c
-  )
diff --git a/tools/llvm-stub/LLVMBuild.txt b/tools/llvm-stub/LLVMBuild.txt
deleted file mode 100644
index 5c3534c..0000000
--- a/tools/llvm-stub/LLVMBuild.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-;===- ./tools/llvm-stub/LLVMBuild.txt --------------------------*- Conf -*--===;
-;
-;                     The LLVM Compiler Infrastructure
-;
-; This file is distributed under the University of Illinois Open Source
-; License. See LICENSE.TXT for details.
-;
-;===------------------------------------------------------------------------===;
-;
-; This is an LLVMBuild description file for the components in this subdirectory.
-;
-; For more information on the LLVMBuild system, please see:
-;
-;   http://llvm.org/docs/LLVMBuild.html
-;
-;===------------------------------------------------------------------------===;
-
-[component_0]
-type = Tool
-name = llvm-stub
-parent = Tools
-required_libraries = 
diff --git a/tools/llvm-stub/Makefile b/tools/llvm-stub/Makefile
deleted file mode 100644
index 077efa2..0000000
--- a/tools/llvm-stub/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-##===- tools/llvm-stub/Makefile ----------------------------*- Makefile -*-===##
-# 
-#                     The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-# 
-##===----------------------------------------------------------------------===##
-
-LEVEL := ../..
-TOOLNAME := llvm-stub
-LINK_COMPONENTS := object
-
-include $(LEVEL)/Makefile.common
-
diff --git a/tools/llvm-stub/llvm-stub.c b/tools/llvm-stub/llvm-stub.c
deleted file mode 100644
index 69cd6ed..0000000
--- a/tools/llvm-stub/llvm-stub.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*===- llvm-stub.c - Stub executable to run llvm bitcode files ------------===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-//
-//===----------------------------------------------------------------------===//
-//
-// This tool is used by the gccld program to enable transparent execution of
-// bitcode files by the user.  Specifically, gccld outputs two files when asked
-// to compile a <program> file:
-//    1. It outputs the LLVM bitcode file to <program>.bc
-//    2. It outputs a stub executable that runs lli on <program>.bc
-//
-// This allows the end user to just say ./<program> and have the JIT executed
-// automatically.  On unix, the stub executable emitted is actually a bourne
-// shell script that does the forwarding.  Windows does not like #!/bin/sh
-// programs in .exe files, so we make it an actual program, defined here.
-//
-//===----------------------------------------------------------------------===*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "llvm/Config/config.h"
-
-#if defined(HAVE_UNISTD_H) && !defined(_MSC_VER)
-#include <unistd.h>
-#endif
-
-#ifdef _WIN32
-#include <process.h>
-#include <io.h>
-#endif
-
-int main(int argc, char** argv) {
-  const char *Interp = getenv("LLVMINTERP");
-  const char **Args;
-  if (Interp == 0) Interp = "lli";
-
-  /* Set up the command line options to pass to the JIT. */
-  Args = (const char**)malloc(sizeof(char*) * (argc+2));
-  /* argv[0] is the JIT */
-  Args[0] = Interp;
-
-#ifdef LLVM_ON_WIN32
-  {
-    int len = strlen(argv[0]);
-    if (len < 4 || strcmp(argv[0] + len - 4, ".exe") != 0) {
-      /* .exe suffix is stripped off of argv[0] if the executable was run on the
-       * command line without one. Put it back on.
-       */
-      argv[0] = strcat(strcpy((char*)malloc(len + 5), argv[0]), ".exe");
-    }
-  }
-#endif
-
-  /* argv[1] is argv[0] + ".bc". */
-  Args[1] = strcat(strcpy((char*)malloc(strlen(argv[0])+4), argv[0]), ".bc");
-
-  /* The rest of the args are as before. */
-  memcpy((char **)Args+2, argv+1, sizeof(char*)*argc);
-
-  /* Run the JIT. */
-#if !defined(_WIN32) || defined(__MINGW64__)
-  execvp(Interp, (char **)Args); /* POSIX execvp takes a char *const[]. */
-#else
-  execvp(Interp, Args); /* windows execvp takes a const char *const *. */
-#endif
-  /* if _execv returns, the JIT could not be started. */
-  fprintf(stderr, "Could not execute the LLVM JIT.  Either add 'lli' to your"
-          " path, or set the\ninterpreter you want to use in the LLVMINTERP "
-          "environment variable.\n");
-  return 1;
-}
diff --git a/utils/findmisopt b/utils/findmisopt
index f2a872c..88f991a 100755
--- a/utils/findmisopt
+++ b/utils/findmisopt
@@ -76,8 +76,7 @@
 # Define the list of optimizations to run. This comprises the same set of 
 # optimizations that opt -std-compile-opts and gccld run, in the same order.
 opt_switches=`llvm-as < /dev/null -o - | opt -std-compile-opts -disable-output -debug-pass=Arguments 2>&1 | sed 's/Pass Arguments: //'`
-ld_switches=`llvm-as < /dev/null -o - | llvm-ld - -debug-pass=Arguments 2>&1 | sed 's/Pass Arguments: //'`
-all_switches="$opt_switches $ld_switches"
+all_switches="$opt_switches"
 echo "Passes : $all_switches"
 
 # Create output directory if it doesn't exist