diff --git a/lib/Target/PowerPC/PPCISelDAGToDAG.cpp b/lib/Target/PowerPC/PPCISelDAGToDAG.cpp
index 926859a..8b30797 100644
--- a/lib/Target/PowerPC/PPCISelDAGToDAG.cpp
+++ b/lib/Target/PowerPC/PPCISelDAGToDAG.cpp
@@ -1111,7 +1111,7 @@
 
       SDValue Chain = LD->getChain();
       SDValue Base = LD->getBasePtr();
-      SDValue Ops[] = { Offset, Base, Chain };
+      SDValue Ops[] = { Base, Offset, Chain };
       return CurDAG->getMachineNode(Opcode, dl, LD->getValueType(0),
                                     PPCLowering.getPointerTy(),
                                     MVT::Other, Ops, 3);
diff --git a/lib/Target/PowerPC/PPCISelLowering.cpp b/lib/Target/PowerPC/PPCISelLowering.cpp
index c7d4546..218a20d 100644
--- a/lib/Target/PowerPC/PPCISelLowering.cpp
+++ b/lib/Target/PowerPC/PPCISelLowering.cpp
@@ -1192,6 +1192,7 @@
                                                   SelectionDAG &DAG) const {
   if (DisablePPCPreinc) return false;
 
+  bool isLoad = true;
   SDValue Ptr;
   EVT VT;
   unsigned Alignment;
@@ -1203,6 +1204,7 @@
     Ptr = ST->getBasePtr();
     VT  = ST->getMemoryVT();
     Alignment = ST->getAlignment();
+    isLoad = false;
   } else
     return false;
 
@@ -1210,7 +1212,25 @@
   if (VT.isVector())
     return false;
 
-  if (SelectAddressRegReg(Ptr, Offset, Base, DAG)) {
+  if (SelectAddressRegReg(Ptr, Base, Offset, DAG)) {
+
+    // Common code will reject creating a pre-inc form if the base pointer
+    // is a frame index, or if N is a store and the base pointer is either
+    // the same as or a predecessor of the value being stored.  Check for
+    // those situations here, and try with swapped Base/Offset instead.
+    bool Swap = false;
+
+    if (isa<FrameIndexSDNode>(Base) || isa<RegisterSDNode>(Base))
+      Swap = true;
+    else if (!isLoad) {
+      SDValue Val = cast<StoreSDNode>(N)->getValue();
+      if (Val == Base || Base.getNode()->isPredecessorOf(Val.getNode()))
+        Swap = true;
+    }
+
+    if (Swap)
+      std::swap(Base, Offset);
+
     AM = ISD::PRE_INC;
     return true;
   }
diff --git a/lib/Target/PowerPC/PPCInstr64Bit.td b/lib/Target/PowerPC/PPCInstr64Bit.td
index 70e2881..ac7bcfb 100644
--- a/lib/Target/PowerPC/PPCInstr64Bit.td
+++ b/lib/Target/PowerPC/PPCInstr64Bit.td
@@ -875,14 +875,14 @@
 def : Pat<(aligned4pre_store G8RC:$rS, ptr_rc_nor0:$ptrreg, iaddroff:$ptroff),
           (STDU G8RC:$rS, iaddroff:$ptroff, ptr_rc_nor0:$ptrreg)>;
 
-def : Pat<(pre_truncsti8 G8RC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STBUX8 G8RC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
-def : Pat<(pre_truncsti16 G8RC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STHUX8 G8RC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
-def : Pat<(pre_truncsti32 G8RC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STWUX8 G8RC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
-def : Pat<(pre_store G8RC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STDUX G8RC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
+def : Pat<(pre_truncsti8 G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STBUX8 G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
+def : Pat<(pre_truncsti16 G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STHUX8 G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
+def : Pat<(pre_truncsti32 G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STWUX8 G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
+def : Pat<(pre_store G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STDUX G8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
 
 
 //===----------------------------------------------------------------------===//
diff --git a/lib/Target/PowerPC/PPCInstrInfo.td b/lib/Target/PowerPC/PPCInstrInfo.td
index 0e37449..be4a7ee 100644
--- a/lib/Target/PowerPC/PPCInstrInfo.td
+++ b/lib/Target/PowerPC/PPCInstrInfo.td
@@ -1004,16 +1004,16 @@
 // Patterns to match the pre-inc stores.  We can't put the patterns on
 // the instruction definitions directly as ISel wants the address base
 // and offset to be separate operands, not a single complex operand.
-def : Pat<(pre_truncsti8 GPRC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STBUX GPRC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
-def : Pat<(pre_truncsti16 GPRC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STHUX GPRC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
-def : Pat<(pre_store GPRC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STWUX GPRC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
-def : Pat<(pre_store F4RC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STFSUX F4RC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
-def : Pat<(pre_store F8RC:$rS, ptr_rc:$ptrreg, ptr_rc_nor0:$ptroff),
-          (STFDUX F8RC:$rS, ptr_rc_nor0:$ptroff, ptr_rc:$ptrreg)>;
+def : Pat<(pre_truncsti8 GPRC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STBUX GPRC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
+def : Pat<(pre_truncsti16 GPRC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STHUX GPRC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
+def : Pat<(pre_store GPRC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STWUX GPRC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
+def : Pat<(pre_store F4RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STFSUX F4RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
+def : Pat<(pre_store F8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff),
+          (STFDUX F8RC:$rS, ptr_rc_nor0:$ptrreg, ptr_rc:$ptroff)>;
 
 def SYNC : XForm_24_sync<31, 598, (outs), (ins),
                         "sync", LdStSync,