test/CodeGen/SystemZ/int-div-01.ll

; Test 32-bit signed division and remainder.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s

declare i32 @foo()

; Test register division.  The result is in the second of the two registers.
define void @f1(i32 *%dest, i32 %a, i32 %b) {
; CHECK-LABEL: f1:
; CHECK: lgfr %r1, %r3
; CHECK: dsgfr %r0, %r4
; CHECK: st %r1, 0(%r2)
; CHECK: br %r14
  %div = sdiv i32 %a, %b
  store i32 %div, i32 *%dest
  ret void
}

; Test register remainder.  The result is in the first of the two registers.
define void @f2(i32 *%dest, i32 %a, i32 %b) {
; CHECK-LABEL: f2:
; CHECK: lgfr %r1, %r3
; CHECK: dsgfr %r0, %r4
; CHECK: st %r0, 0(%r2)
; CHECK: br %r14
  %rem = srem i32 %a, %b
  store i32 %rem, i32 *%dest
  ret void
}

; Test that division and remainder use a single instruction.
define i32 @f3(i32 %dummy, i32 %a, i32 %b) {
; CHECK-LABEL: f3:
; CHECK-NOT: %r2
; CHECK: lgfr %r3, %r3
; CHECK-NOT: %r2
; CHECK: dsgfr %r2, %r4
; CHECK-NOT: dsgfr
; CHECK: or %r2, %r3
; CHECK: br %r14
  %div = sdiv i32 %a, %b
  %rem = srem i32 %a, %b
  %or = or i32 %rem, %div
  ret i32 %or
}

; Check that the sign extension of the dividend is elided when the argument
; is already sign-extended.
define i32 @f4(i32 %dummy, i32 signext %a, i32 %b) {
; CHECK-LABEL: f4:
; CHECK-NOT: {{%r[234]}}
; CHECK: dsgfr %r2, %r4
; CHECK-NOT: dsgfr
; CHECK: or %r2, %r3
; CHECK: br %r14
  %div = sdiv i32 %a, %b
  %rem = srem i32 %a, %b
  %or = or i32 %rem, %div
  ret i32 %or
}

; Test that memory dividends are loaded using sign extension (LGF).
define i32 @f5(i32 %dummy, i32 *%src, i32 %b) {
; CHECK-LABEL: f5:
; CHECK-NOT: %r2
; CHECK: lgf %r3, 0(%r3)
; CHECK-NOT: %r2
; CHECK: dsgfr %r2, %r4
; CHECK-NOT: dsgfr
; CHECK: or %r2, %r3
; CHECK: br %r14
  %a = load i32 *%src
  %div = sdiv i32 %a, %b
  %rem = srem i32 %a, %b
  %or = or i32 %rem, %div
  ret i32 %or
}

; Test memory division with no displacement.
define void @f6(i32 *%dest, i32 %a, i32 *%src) {
; CHECK-LABEL: f6:
; CHECK: lgfr %r1, %r3
; CHECK: dsgf %r0, 0(%r4)
; CHECK: st %r1, 0(%r2)
; CHECK: br %r14
  %b = load i32 *%src
  %div = sdiv i32 %a, %b
  store i32 %div, i32 *%dest
  ret void
}

; Test memory remainder with no displacement.
define void @f7(i32 *%dest, i32 %a, i32 *%src) {
; CHECK-LABEL: f7:
; CHECK: lgfr %r1, %r3
; CHECK: dsgf %r0, 0(%r4)
; CHECK: st %r0, 0(%r2)
; CHECK: br %r14
  %b = load i32 *%src
  %rem = srem i32 %a, %b
  store i32 %rem, i32 *%dest
  ret void
}

; Test both memory division and memory remainder.
define i32 @f8(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f8:
; CHECK-NOT: %r2
; CHECK: lgfr %r3, %r3
; CHECK-NOT: %r2
; CHECK: dsgf %r2, 0(%r4)
; CHECK-NOT: {{dsgf|dsgfr}}
; CHECK: or %r2, %r3
; CHECK: br %r14
  %b = load i32 *%src
  %div = sdiv i32 %a, %b
  %rem = srem i32 %a, %b
  %or = or i32 %rem, %div
  ret i32 %or
}

; Check the high end of the DSGF range.
define i32 @f9(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f9:
; CHECK: dsgf %r2, 524284(%r4)
; CHECK: br %r14
  %ptr = getelementptr i32 *%src, i64 131071
  %b = load i32 *%ptr
  %rem = srem i32 %a, %b
  ret i32 %rem
}

; Check the next word up, which needs separate address logic.
; Other sequences besides this one would be OK.
define i32 @f10(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f10:
; CHECK: agfi %r4, 524288
; CHECK: dsgf %r2, 0(%r4)
; CHECK: br %r14
  %ptr = getelementptr i32 *%src, i64 131072
  %b = load i32 *%ptr
  %rem = srem i32 %a, %b
  ret i32 %rem
}

; Check the high end of the negative aligned DSGF range.
define i32 @f11(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f11:
; CHECK: dsgf %r2, -4(%r4)
; CHECK: br %r14
  %ptr = getelementptr i32 *%src, i64 -1
  %b = load i32 *%ptr
  %rem = srem i32 %a, %b
  ret i32 %rem
}

; Check the low end of the DSGF range.
define i32 @f12(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f12:
; CHECK: dsgf %r2, -524288(%r4)
; CHECK: br %r14
  %ptr = getelementptr i32 *%src, i64 -131072
  %b = load i32 *%ptr
  %rem = srem i32 %a, %b
  ret i32 %rem
}

; Check the next word down, which needs separate address logic.
; Other sequences besides this one would be OK.
define i32 @f13(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f13:
; CHECK: agfi %r4, -524292
; CHECK: dsgf %r2, 0(%r4)
; CHECK: br %r14
  %ptr = getelementptr i32 *%src, i64 -131073
  %b = load i32 *%ptr
  %rem = srem i32 %a, %b
  ret i32 %rem
}

; Check that DSGF allows an index.
define i32 @f14(i32 %dummy, i32 %a, i64 %src, i64 %index) {
; CHECK-LABEL: f14:
; CHECK: dsgf %r2, 524287(%r5,%r4)
; CHECK: br %r14
  %add1 = add i64 %src, %index
  %add2 = add i64 %add1, 524287
  %ptr = inttoptr i64 %add2 to i32 *
  %b = load i32 *%ptr
  %rem = srem i32 %a, %b
  ret i32 %rem
}

; Make sure that we still use DSGFR rather than DSGR in cases where
; a load and division cannot be combined.
define void @f15(i32 *%dest, i32 *%src) {
; CHECK-LABEL: f15:
; CHECK: l [[B:%r[0-9]+]], 0(%r3)
; CHECK: brasl %r14, foo@PLT
; CHECK: lgfr %r1, %r2
; CHECK: dsgfr %r0, [[B]]
; CHECK: br %r14
  %b = load i32 *%src
  %a = call i32 @foo()
  %div = sdiv i32 %a, %b
  store i32 %div, i32 *%dest
  ret void
}

; Check that divisions of spilled values can use DSGF rather than DSGFR.
define i32 @f16(i32 *%ptr0) {
; CHECK-LABEL: f16:
; CHECK: brasl %r14, foo@PLT
; CHECK: dsgf {{%r[0-9]+}}, 16{{[04]}}(%r15)
; CHECK: br %r14
  %ptr1 = getelementptr i32 *%ptr0, i64 2
  %ptr2 = getelementptr i32 *%ptr0, i64 4
  %ptr3 = getelementptr i32 *%ptr0, i64 6
  %ptr4 = getelementptr i32 *%ptr0, i64 8
  %ptr5 = getelementptr i32 *%ptr0, i64 10
  %ptr6 = getelementptr i32 *%ptr0, i64 12
  %ptr7 = getelementptr i32 *%ptr0, i64 14
  %ptr8 = getelementptr i32 *%ptr0, i64 16
  %ptr9 = getelementptr i32 *%ptr0, i64 18

  %val0 = load i32 *%ptr0
  %val1 = load i32 *%ptr1
  %val2 = load i32 *%ptr2
  %val3 = load i32 *%ptr3
  %val4 = load i32 *%ptr4
  %val5 = load i32 *%ptr5
  %val6 = load i32 *%ptr6
  %val7 = load i32 *%ptr7
  %val8 = load i32 *%ptr8
  %val9 = load i32 *%ptr9

  %ret = call i32 @foo()

  %div0 = sdiv i32 %ret, %val0
  %div1 = sdiv i32 %div0, %val1
  %div2 = sdiv i32 %div1, %val2
  %div3 = sdiv i32 %div2, %val3
  %div4 = sdiv i32 %div3, %val4
  %div5 = sdiv i32 %div4, %val5
  %div6 = sdiv i32 %div5, %val6
  %div7 = sdiv i32 %div6, %val7
  %div8 = sdiv i32 %div7, %val8
  %div9 = sdiv i32 %div8, %val9

  ret i32 %div9
}