Remove intrinsics that we will not be implementing.
Fix the anchor names of intrinsics to all be int_ so as to distinguish
them from the i_ prefix reserved for instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35645 91177308-0d34-0410-b5e6-96231b3b80d8
diff --git a/docs/LangRef.html b/docs/LangRef.html
index ee2dcd9..c54c8be 100644
--- a/docs/LangRef.html
+++ b/docs/LangRef.html
@@ -146,44 +146,45 @@
<ol>
<li><a href="#int_varargs">Variable Argument Handling Intrinsics</a>
<ol>
- <li><a href="#i_va_start">'<tt>llvm.va_start</tt>' Intrinsic</a></li>
- <li><a href="#i_va_end">'<tt>llvm.va_end</tt>' Intrinsic</a></li>
- <li><a href="#i_va_copy">'<tt>llvm.va_copy</tt>' Intrinsic</a></li>
+ <li><a href="#int_va_start">'<tt>llvm.va_start</tt>' Intrinsic</a></li>
+ <li><a href="#int_va_end">'<tt>llvm.va_end</tt>' Intrinsic</a></li>
+ <li><a href="#int_va_copy">'<tt>llvm.va_copy</tt>' Intrinsic</a></li>
</ol>
</li>
<li><a href="#int_gc">Accurate Garbage Collection Intrinsics</a>
<ol>
- <li><a href="#i_gcroot">'<tt>llvm.gcroot</tt>' Intrinsic</a></li>
- <li><a href="#i_gcread">'<tt>llvm.gcread</tt>' Intrinsic</a></li>
- <li><a href="#i_gcwrite">'<tt>llvm.gcwrite</tt>' Intrinsic</a></li>
+ <li><a href="#int_gcroot">'<tt>llvm.gcroot</tt>' Intrinsic</a></li>
+ <li><a href="#int_gcread">'<tt>llvm.gcread</tt>' Intrinsic</a></li>
+ <li><a href="#int_gcwrite">'<tt>llvm.gcwrite</tt>' Intrinsic</a></li>
</ol>
</li>
<li><a href="#int_codegen">Code Generator Intrinsics</a>
<ol>
- <li><a href="#i_returnaddress">'<tt>llvm.returnaddress</tt>' Intrinsic</a></li>
- <li><a href="#i_frameaddress">'<tt>llvm.frameaddress</tt>' Intrinsic</a></li>
- <li><a href="#i_stacksave">'<tt>llvm.stacksave</tt>' Intrinsic</a></li>
- <li><a href="#i_stackrestore">'<tt>llvm.stackrestore</tt>' Intrinsic</a></li>
- <li><a href="#i_prefetch">'<tt>llvm.prefetch</tt>' Intrinsic</a></li>
- <li><a href="#i_pcmarker">'<tt>llvm.pcmarker</tt>' Intrinsic</a></li>
- <li><a href="#i_readcyclecounter"><tt>llvm.readcyclecounter</tt>' Intrinsic</a></li>
+ <li><a href="#int_returnaddress">'<tt>llvm.returnaddress</tt>' Intrinsic</a></li>
+ <li><a href="#int_frameaddress">'<tt>llvm.frameaddress</tt>' Intrinsic</a></li>
+ <li><a href="#int_stacksave">'<tt>llvm.stacksave</tt>' Intrinsic</a></li>
+ <li><a href="#int_stackrestore">'<tt>llvm.stackrestore</tt>' Intrinsic</a></li>
+ <li><a href="#int_prefetch">'<tt>llvm.prefetch</tt>' Intrinsic</a></li>
+ <li><a href="#int_pcmarker">'<tt>llvm.pcmarker</tt>' Intrinsic</a></li>
+ <li><a href="#int_readcyclecounter"><tt>llvm.readcyclecounter</tt>' Intrinsic</a></li>
</ol>
</li>
<li><a href="#int_libc">Standard C Library Intrinsics</a>
<ol>
- <li><a href="#i_memcpy">'<tt>llvm.memcpy.*</tt>' Intrinsic</a></li>
- <li><a href="#i_memmove">'<tt>llvm.memmove.*</tt>' Intrinsic</a></li>
- <li><a href="#i_memset">'<tt>llvm.memset.*</tt>' Intrinsic</a></li>
- <li><a href="#i_sqrt">'<tt>llvm.sqrt.*</tt>' Intrinsic</a></li>
- <li><a href="#i_powi">'<tt>llvm.powi.*</tt>' Intrinsic</a></li>
+ <li><a href="#int_memcpy">'<tt>llvm.memcpy.*</tt>' Intrinsic</a></li>
+ <li><a href="#int_memmove">'<tt>llvm.memmove.*</tt>' Intrinsic</a></li>
+ <li><a href="#int_memset">'<tt>llvm.memset.*</tt>' Intrinsic</a></li>
+ <li><a href="#int_sqrt">'<tt>llvm.sqrt.*</tt>' Intrinsic</a></li>
+ <li><a href="#int_powi">'<tt>llvm.powi.*</tt>' Intrinsic</a></li>
</ol>
</li>
<li><a href="#int_manip">Bit Manipulation Intrinsics</a>
<ol>
- <li><a href="#i_bswap">'<tt>llvm.bswap.*</tt>' Intrinsics</a></li>
+ <li><a href="#int_bswap">'<tt>llvm.bswap.*</tt>' Intrinsics</a></li>
<li><a href="#int_ctpop">'<tt>llvm.ctpop.*</tt>' Intrinsic </a></li>
<li><a href="#int_ctlz">'<tt>llvm.ctlz.*</tt>' Intrinsic </a></li>
<li><a href="#int_cttz">'<tt>llvm.cttz.*</tt>' Intrinsic </a></li>
+ <li><a href="#int_bit_part_select">'<tt>llvm.part.select.*</tt>' Intrinsic </a></li>
</ol>
</li>
<li><a href="#int_debugger">Debugger intrinsics</a></li>
@@ -1498,7 +1499,7 @@
</p>
<pre>
- %X = call i32 asm "<a href="#i_bswap">bswap</a> $0", "=r,r"(i32 %Y)
+ %X = call i32 asm "<a href="#int_bswap">bswap</a> $0", "=r,r"(i32 %Y)
</pre>
<p>
@@ -3663,7 +3664,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_va_start">'<tt>llvm.va_start</tt>' Intrinsic</a>
+ <a name="int_va_start">'<tt>llvm.va_start</tt>' Intrinsic</a>
</div>
@@ -3692,7 +3693,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_va_end">'<tt>llvm.va_end</tt>' Intrinsic</a>
+ <a name="int_va_end">'<tt>llvm.va_end</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3701,7 +3702,7 @@
<h5>Overview:</h5>
<p>The '<tt>llvm.va_end</tt>' intrinsic destroys <tt><arglist></tt>
-which has been initialized previously with <tt><a href="#i_va_start">llvm.va_start</a></tt>
+which has been initialized previously with <tt><a href="#int_va_start">llvm.va_start</a></tt>
or <tt><a href="#i_va_copy">llvm.va_copy</a></tt>.</p>
<h5>Arguments:</h5>
@@ -3712,15 +3713,15 @@
<p>The '<tt>llvm.va_end</tt>' intrinsic works just like the <tt>va_end</tt>
macro available in C. In a target-dependent way, it destroys the <tt>va_list</tt>.
-Calls to <a href="#i_va_start"><tt>llvm.va_start</tt></a> and <a
- href="#i_va_copy"><tt>llvm.va_copy</tt></a> must be matched exactly
+Calls to <a href="#int_va_start"><tt>llvm.va_start</tt></a> and <a
+ href="#int_va_copy"><tt>llvm.va_copy</tt></a> must be matched exactly
with calls to <tt>llvm.va_end</tt>.</p>
</div>
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_va_copy">'<tt>llvm.va_copy</tt>' Intrinsic</a>
+ <a name="int_va_copy">'<tt>llvm.va_copy</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3747,7 +3748,7 @@
<p>The '<tt>llvm.va_copy</tt>' intrinsic works just like the <tt>va_copy</tt> macro
available in C. In a target-dependent way, it copies the source
<tt>va_list</tt> element into the destination list. This intrinsic is necessary
-because the <tt><a href="#i_va_start">llvm.va_start</a></tt> intrinsic may be
+because the <tt><a href="#int_va_start">llvm.va_start</a></tt> intrinsic may be
arbitrarily complex and require memory allocation, for example.</p>
</div>
@@ -3762,9 +3763,9 @@
<p>
LLVM support for <a href="GarbageCollection.html">Accurate Garbage
Collection</a> requires the implementation and generation of these intrinsics.
-These intrinsics allow identification of <a href="#i_gcroot">GC roots on the
+These intrinsics allow identification of <a href="#int_gcroot">GC roots on the
stack</a>, as well as garbage collector implementations that require <a
-href="#i_gcread">read</a> and <a href="#i_gcwrite">write</a> barriers.
+href="#int_gcread">read</a> and <a href="#int_gcwrite">write</a> barriers.
Front-ends for type-safe garbage collected languages should generate these
intrinsics to make use of the LLVM garbage collectors. For more details, see <a
href="GarbageCollection.html">Accurate Garbage Collection with LLVM</a>.
@@ -3773,7 +3774,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_gcroot">'<tt>llvm.gcroot</tt>' Intrinsic</a>
+ <a name="int_gcroot">'<tt>llvm.gcroot</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3807,7 +3808,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_gcread">'<tt>llvm.gcread</tt>' Intrinsic</a>
+ <a name="int_gcread">'<tt>llvm.gcread</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3842,7 +3843,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_gcwrite">'<tt>llvm.gcwrite</tt>' Intrinsic</a>
+ <a name="int_gcwrite">'<tt>llvm.gcwrite</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3891,7 +3892,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_returnaddress">'<tt>llvm.returnaddress</tt>' Intrinsic</a>
+ <a name="int_returnaddress">'<tt>llvm.returnaddress</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3936,7 +3937,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_frameaddress">'<tt>llvm.frameaddress</tt>' Intrinsic</a>
+ <a name="int_frameaddress">'<tt>llvm.frameaddress</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3979,7 +3980,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_stacksave">'<tt>llvm.stacksave</tt>' Intrinsic</a>
+ <a name="int_stacksave">'<tt>llvm.stacksave</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -3993,7 +3994,7 @@
<p>
The '<tt>llvm.stacksave</tt>' intrinsic is used to remember the current state of
-the function stack, for use with <a href="#i_stackrestore">
+the function stack, for use with <a href="#int_stackrestore">
<tt>llvm.stackrestore</tt></a>. This is useful for implementing language
features like scoped automatic variable sized arrays in C99.
</p>
@@ -4002,7 +4003,7 @@
<p>
This intrinsic returns a opaque pointer value that can be passed to <a
-href="#i_stackrestore"><tt>llvm.stackrestore</tt></a>. When an
+href="#int_stackrestore"><tt>llvm.stackrestore</tt></a>. When an
<tt>llvm.stackrestore</tt> intrinsic is executed with a value saved from
<tt>llvm.stacksave</tt>, it effectively restores the state of the stack to the
state it was in when the <tt>llvm.stacksave</tt> intrinsic executed. In
@@ -4014,7 +4015,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_stackrestore">'<tt>llvm.stackrestore</tt>' Intrinsic</a>
+ <a name="int_stackrestore">'<tt>llvm.stackrestore</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4029,7 +4030,7 @@
<p>
The '<tt>llvm.stackrestore</tt>' intrinsic is used to restore the state of
the function stack to the state it was in when the corresponding <a
-href="#i_stacksave"><tt>llvm.stacksave</tt></a> intrinsic executed. This is
+href="#int_stacksave"><tt>llvm.stacksave</tt></a> intrinsic executed. This is
useful for implementing language features like scoped automatic variable sized
arrays in C99.
</p>
@@ -4037,7 +4038,7 @@
<h5>Semantics:</h5>
<p>
-See the description for <a href="#i_stacksave"><tt>llvm.stacksave</tt></a>.
+See the description for <a href="#int_stacksave"><tt>llvm.stacksave</tt></a>.
</p>
</div>
@@ -4045,7 +4046,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_prefetch">'<tt>llvm.prefetch</tt>' Intrinsic</a>
+ <a name="int_prefetch">'<tt>llvm.prefetch</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4090,7 +4091,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_pcmarker">'<tt>llvm.pcmarker</tt>' Intrinsic</a>
+ <a name="int_pcmarker">'<tt>llvm.pcmarker</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4131,7 +4132,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_readcyclecounter">'<tt>llvm.readcyclecounter</tt>' Intrinsic</a>
+ <a name="int_readcyclecounter">'<tt>llvm.readcyclecounter</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4179,7 +4180,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_memcpy">'<tt>llvm.memcpy</tt>' Intrinsic</a>
+ <a name="int_memcpy">'<tt>llvm.memcpy</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4233,7 +4234,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_memmove">'<tt>llvm.memmove</tt>' Intrinsic</a>
+ <a name="int_memmove">'<tt>llvm.memmove</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4288,7 +4289,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_memset">'<tt>llvm.memset.*</tt>' Intrinsics</a>
+ <a name="int_memset">'<tt>llvm.memset.*</tt>' Intrinsics</a>
</div>
<div class="doc_text">
@@ -4341,7 +4342,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_sqrt">'<tt>llvm.sqrt.*</tt>' Intrinsic</a>
+ <a name="int_sqrt">'<tt>llvm.sqrt.*</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4377,7 +4378,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_powi">'<tt>llvm.powi.*</tt>' Intrinsic</a>
+ <a name="int_powi">'<tt>llvm.powi.*</tt>' Intrinsic</a>
</div>
<div class="doc_text">
@@ -4426,7 +4427,7 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="i_bswap">'<tt>llvm.bswap.*</tt>' Intrinsics</a>
+ <a name="int_bswap">'<tt>llvm.bswap.*</tt>' Intrinsics</a>
</div>
<div class="doc_text">
@@ -4589,300 +4590,6 @@
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="int_bit_and_reduce">'<tt>llvm.bit.and.reduce.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.and.reduce</tt> on
-any integer bit width.
-<pre>
- declare i1 @llvm.bit.and.reduce.i32(i32 %val)
- declare i1 @llvm.bit.and.reduce.i97(i97 %val)
-</pre>
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.and.reduce</tt>' family of intrinsic functions applies the
-AND operator bitwise to each bit in <tt>%val</tt> until it yields the result.
-</p>
-
-<h5>Arguments:</h5>
-<p>The argument may be any bit width. The result is always a 1-bit integer.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.and.reduce</tt>' intrinsic is the equivalent of a test
-against <tt>-1</tt>. Only if all bits in <tt>%val</tt> are set will the result
-be 1, otherwise 0.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_or_reduce">'<tt>llvm.bit.or.reduce.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.or.reduce</tt> on
-any integer bit width.
-<pre>
- declare i1 @llvm.bit.or.reduce.i32(i32 %val)
- declare i1 @llvm.bit.or.reduce.i97(i97 %val)
-</pre>
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.or.reduce</tt>' family of intrinsic functions applies the
-OR operator bitwise to each bit in <tt>%val</tt> until it yields the result.
-</p>
-
-<h5>Arguments:</h5>
-<p>The argument may be any bit width. The result is always a 1-bit integer.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.or.reduce</tt>' intrinsic is the equivalent of a test
-against <tt>0</tt>. Only if all bits in <tt>%val</tt> are clear will the result
-be 0, otherwise 1.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_xor_reduce">'<tt>llvm.bit.xor.reduce.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.xor.reduce</tt> on
-any integer bit width.
-<pre>
- declare i1 @llvm.bit.xor.reduce.i32(i32 %val)
- declare i1 @llvm.bit.xor.reduce.i97(i97 %val)
-</pre>
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.xor.reduce</tt>' family of intrinsic functions applies the
-XOR operator bitwise to each bit in <tt>%val</tt> until it yields the result.
-</p>
-
-<h5>Arguments:</h5>
-<p>The argument may be any bit width. The result is always a 1-bit integer.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.xor.reduce</tt>' computes its result by performing an XOR
-operation on the two lowest order bits in <tt>%val</tt>. That result is then
-XOR'd with the next bit in <tt>%val</tt> and this process continues until all
-bits in <tt>%val</tt> have been XOR'd with the result of the previous XORs. The
-resulting bit is returned.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_nand_reduce">'<tt>llvm.bit.nand.reduce.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.nand.reduce</tt> on
-any integer bit width.
-<pre>
- declare i1 @llvm.bit.nand.reduce.i32(i32 %val)
- declare i1 @llvm.bit.nand.reduce.i97(i97 %val)
-</pre>
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.nand.reduce</tt>' family of intrinsic functions applies the
-NAND operator bitwise to each bit in <tt>%val</tt> until it yields the result.
-</p>
-
-<h5>Arguments:</h5>
-<p>The argument may be any bit width. The result is always a 1-bit integer.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.nand.reduce</tt>' intrinsic is the equivalent of taking the
-complement of the <tt>llvm.bit.and.reduce</tt> intrinsic. That is, it returns 0
-if <tt>%val</tt> is all ones (-1) and 1 otherwise.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_nor_reduce">'<tt>llvm.bit.nor.reduce.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.nor.reduce</tt> on
-any integer bit width.
-<pre>
- declare i1 @llvm.bit.nor.reduce.i32(i32 %val)
- declare i1 @llvm.bit.nor.reduce.i97(i97 %val)
-</pre>
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.nor.reduce</tt>' family of intrinsic functions applies the
-NOR operator bitwise to each bit in <tt>%val</tt> until it yields the result.
-</p>
-
-<h5>Arguments:</h5>
-<p>The argument may be any bit width. The result is always a 1-bit integer.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.nor.reduce</tt>' intrinsic is equivalent to the complement
-of the <tt>llvm.bit.or.reduce</tt> intrinsic. That is, it returns 1 if all bits
-in <tt>%val</tt> are 0, and 1 otherwise.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_nxor_reduce">'<tt>llvm.bit.nxor.reduce.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.nxor.reduce</tt> on
-any integer bit width.
-<pre>
- declare i1 @llvm.bit.nxor.reduce.i32(i32 %val)
- declare i1 @llvm.bit.nxor.reduce.i97(i97 %val)
-</pre>
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.nxor.reduce</tt>' family of intrinsic functions applies the
-AND operator bitwise to each bit in <tt>%val</tt> until it yields the result.
-</p>
-
-<h5>Arguments:</h5>
-<p>The argument may be any bit width. The result is always a 1-bit integer.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.nxor.reduce</tt>' intrinsic is the equivalent of the
-complement of the <tt>llvm.bit.xor.reduce</tt> intrinsic.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_select">'<tt>llvm.bit.select.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.select</tt> on any
-integer bit width.
-<pre>
- declare i1 @llvm.bit.select.i17 (i17 %val, i32 %bit)
- declare i1 @llvm.bit.select.i29 (i29 %val, i32 %bit)
-</pre>
-
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.select</tt>' family of intrinsic functions selects a
-specific bit from an integer value and returns it.</p>
-
-<h5>Arguments:</h5>
-<p>The two arguments may be any bit width. The result is always a 1-bit
-integer. The first argument, <tt>%val</tt> may be any bit width and is the
-value from which the bit is selected. The second argument, <tt>%bit</tt> must
-be an <tt>i32</tt> and is the bit index of the bit to be selected. Bits are
-numbered starting with 0 as the lowest ordered bit.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.select</tt>' intrinsic is the equivalent of shift and a
-truncate operation. The <tt>%val</tt> is shifted right by <tt>%bit</tt> bits and
-then truncated to a 1-bit integer.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_set">'<tt>llvm.bit.set.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.set</tt> on any
-integer bit width.
-<pre>
- declare i17 @llvm.bit.set.i17.i17 (i17 %val, i32 %bit)
- declare i52 @llvm.bit.set.i52.i52 (i52 %val, i32 %bit)
-</pre>
-
-<h5>Overview:</h5>
-<p>
-The '<tt>llvm.bit.set</tt>' family of intrinsic functions sets a specific bit in
-a <tt>%val</tt> and returns the result.</p>
-
-<h5>Arguments:</h5>
-<p>The result and the first argument, <tt>%val</tt>, may be an integer of any
-bit width, but they must be the same bit width. The second argument must be an
-<tt>i32</tt>.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.set</tt>' intrinsic is the equivalent of creating a bit
-mask for the <tt>%bit</tt> requested in the width of <tt>%val</tt>, ORing that
-mask with <tt>%val</tt> and returning the result.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_clear">'<tt>llvm.bit.clear.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.clear</tt> on any
-integer bit width.
-<pre>
- declare i17 @llvm.bit.clear.i17.i17 (i17 %val, i32 %bit)
- declare i29 @llvm.bit.clear.i29.i29 (i29 %val, i32 %bit)
-</pre>
-
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.clear</tt>' family of intrinsic functions clears a specific
-bit in a value and returns the result.</p>
-
-<h5>Arguments:</h5>
-<p>The result and the first argument, <tt>%val</tt>, may be an integer of any
-bit width, but they must be the same bit width. The second argument must be an
-<tt>i32</tt>.</p>
-
-<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.clear</tt>' intrinsic is the equivalent of making a bit
-mask in the width of <tt>%val</tt> but with the bit at index <tt>%bit</tt> set
-to zero, ANDing that mask with <tt>%val</tt> and returning the result.</p>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
- <a name="int_bit_concat">'<tt>llvm.bit.concat.*</tt>' Intrinsic</a>
-</div>
-
-<div class="doc_text">
-
-<h5>Syntax:</h5>
-<p>This is an overloaded intrinsic. You can use <tt>llvm.bit.concat</tt> on any
-integer bit width.
-<pre>
- declare i32 @llvm.bit.concat.i32.i17.i15 (i17 %hi, i15 %lo)
- declare i29 @llvm.bit.concat.i29.i12.i15 (i12 %hi, i15 %lo)
-</pre>
-
-<h5>Overview:</h5>
-<p>The '<tt>llvm.bit.concat</tt>' family of intrinsic functions concatenates two
-integer values to produce a longer one.</p>
-
-<h5>Arguments:</h5>
-<p>The two arguments may be any bit width. The result must be an integer type
-whose bit width is the sum of the arguments' bit widths. The first argument,
-<tt>%hi</tt>, represents the bits that will occupy the high order bit locations
-in the concatenated result. The second argument, <tt>%lo</tt>, will occupy the
-lower order bit locations in the result.</p>
-
-<h5>Semantics:</h5>
-
-<p>The '<tt>llvm.bit.concat</tt>' intrinsic is the equivalent of two
-<tt>zext</tt> instructions, a <tt>shl</tt> and an <tt>or</tt>. The operation
-proceeds as follows:</p>
-<ol>
- <li>Each of the arguments is <tt>zext</tt>'d to the result bit width.</li>
- <li>The <tt>%hi</tt> argument is shift left by the width of the <tt>%lo</tt>
- argument (shifted into to high order bits).</li>
- <li>The shifted <tt>%hi</tt> value and <tt>%lo</tt> are <tt>or</tt>'d together
- to form the result.</li>
-</ol>
-</div>
-
-<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection">
<a name="int_bit_part_select">'<tt>llvm.bit.part.select.*</tt>' Intrinsic</a>
</div>
@@ -4904,11 +4611,15 @@
<h5>Arguments:</h5>
<p>The first argument, <tt>%val</tt> and the result may be integer types of
any bit width but they must have the same bit width. The second and third
-arguments must be <tt>i32</tt> type.</p>
+arguments must be <tt>i32</tt> type since they specify only a bit index.</p>
<h5>Semantics:</h5>
-<p>The '<tt>llvm.bit.part.select</tt>' intrinsic is the equivalent of shifting
-<tt>%val</tt> right by <tt>%loBit</tt> bits and then ANDing it with a mask with
+<p>The operation of the '<tt>llvm.bit.part.select</tt>' intrinsic has two modes
+of operation: forwards and reverse. If <tt>%loBit</tt> is greater than
+<tt>%hiBits</tt> then the intrinsic operates in reverse mode. Otherwise it
+operates in forward mode.</p>
+<p>In forward mode, this intrinsic is the equivalent of shifting <tt>%val</tt>
+right by <tt>%loBit</tt> bits and then ANDing it with a mask with
only the <tt>%hiBit - %loBit</tt> bits set, as follows:</p>
<ol>
<li>The <tt>%val</tt> is shifted right (LSHR) by the number of bits specified
@@ -4918,6 +4629,16 @@
<li>A mask of the retained bits is created by shifting a -1 value.</li>
<li>The mask is ANDed with <tt>%val</tt> to produce the result.
</ol>
+<p>In reverse mode, a similar computation is made except that:</p>
+<ol>
+ <li>The bits selected wrap around to include both the highest and lowest bits.
+ For example, part_select(i16 X, 4, 7) selects bits from X with a mask of
+ 0x00F0 (forwards case) while part_select(i16 X, 8, 3) selects bits from X
+ with a mask of 0xFF0F.</li>
+ <li>The bits returned in the reverse case are reversed. So, if X has the value
+ 0x6ACF and we apply part_select(i16 X, 8, 3) to it, we get back the value
+ 0x0A6F.</li>
+</ol>
</div>
<!-- _______________________________________________________________________ -->