Regroup NewNightlyTest.pl options
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84476 91177308-0d34-0410-b5e6-96231b3b80d8
diff --git a/utils/NewNightlyTest.pl b/utils/NewNightlyTest.pl
index 477df8f..7331069 100755
--- a/utils/NewNightlyTest.pl
+++ b/utils/NewNightlyTest.pl
@@ -15,61 +15,15 @@
# Syntax: NightlyTest.pl [OPTIONS] [CVSROOT BUILDDIR WEBDIR]
# where
# OPTIONS may include one or more of the following:
-# -nocheckout Do not create, checkout, update, or configure
-# the source tree.
-# -noremove Do not remove the BUILDDIR after it has been built.
-# -noremoveresults Do not remove the WEBDIR after it has been built.
-# -nobuild Do not build llvm. If tests are enabled perform them
-# on the llvm build specified in the build directory
-# -notest Do not even attempt to run the test programs.
-# -nodejagnu Do not run feature or regression tests
-# -parallel Run parallel jobs with GNU Make (see -parallel-jobs).
-# -parallel-jobs The number of parallel Make jobs to use (default is two).
-# -with-clang Checkout Clang source into tools/clang.
-# -release Build an LLVM Release version
-# -release-asserts Build an LLVM ReleaseAsserts version
-# -enable-llcbeta Enable testing of beta features in llc.
-# -enable-lli Enable testing of lli (interpreter) features, default is off
-# -disable-pic Disable building with Position Independent Code.
-# -disable-llc Disable LLC tests in the nightly tester.
-# -disable-jit Disable JIT tests in the nightly tester.
-# -disable-cbe Disable C backend tests in the nightly tester.
-# -disable-lto Disable link time optimization.
-# -disable-bindings Disable building LLVM bindings.
-# -verbose Turn on some debug output
-# -debug Print information useful only to maintainers of this script.
-# -nice Checkout/Configure/Build with "nice" to reduce impact
-# on busy servers.
-# -f2c Next argument specifies path to F2C utility
-# -nickname The next argument specifieds the nickname this script
-# will submit to the nightlytest results repository.
-# -gccpath Path to gcc/g++ used to build LLVM
-# -cvstag Check out a specific CVS tag to build LLVM (useful for
-# testing release branches)
-# -usecvs Check code out from the (old) CVS Repository instead of from
-# the standard Subversion repository.
-# -target Specify the target triplet
-# -cflags Next argument specifies that C compilation options that
-# override the default.
-# -cxxflags Next argument specifies that C++ compilation options that
-# override the default.
-# -ldflags Next argument specifies that linker options that override
-# the default.
-# -test-cflags Next argument specifies that C compilation options that
-# override the default when running the testsuite.
-# -test-cxxflags Next argument specifies that C++ compilation options that
-# override the default when running the testsuite.
-# -compileflags Next argument specifies extra options passed to make when
-# building LLVM.
-# -use-gmake Use gmake instead of the default make command to build
-# llvm and run tests.
#
-# ---------------- Options to configure llvm-test ----------------------------
-# -extraflags Next argument specifies extra options that are passed to
-# compile the tests.
-# -noexternals Do not run the external tests (for cases where povray
-# or SPEC are not installed)
-# -with-externals Specify a directory where the external tests are located.
+# MAIN OPTIONS:
+# -config LLVMPATH If specified, use an existing LLVM build and only run and
+# report the test information. The LLVMCONFIG argument should
+# be the path to the llvm-config executable in the LLVM build.
+# This should be the first argument if given. NOT YET
+# IMPLEMENTED.
+# -nickname NAME The NAME argument specifieds the nickname this script
+# will submit to the nightlytest results repository.
# -submit-server Specifies a server to submit the test results too. If this
# option is not specified it defaults to
# llvm.org. This is basically just the address of the
@@ -83,6 +37,64 @@
# the "sentdata.txt" file as its sole argument.
# -nosubmit Do not report the test results back to a submit server.
#
+#
+# BUILD OPTIONS (not used with -config):
+# -nocheckout Do not create, checkout, update, or configure
+# the source tree.
+# -noremove Do not remove the BUILDDIR after it has been built.
+# -noremoveresults Do not remove the WEBDIR after it has been built.
+# -nobuild Do not build llvm. If tests are enabled perform them
+# on the llvm build specified in the build directory
+# -release Build an LLVM Release version
+# -release-asserts Build an LLVM ReleaseAsserts version
+# -disable-bindings Disable building LLVM bindings.
+# -cvstag Check out a specific CVS tag to build LLVM (useful for
+# testing release branches)
+# -usecvs Check code out from the (old) CVS Repository instead of from
+# the standard Subversion repository.
+# -with-clang Checkout Clang source into tools/clang.
+# -compileflags Next argument specifies extra options passed to make when
+# building LLVM.
+# -use-gmake Use gmake instead of the default make command to build
+# llvm and run tests.
+#
+# TESTING OPTIONS:
+# -notest Do not even attempt to run the test programs.
+# -nodejagnu Do not run feature or regression tests
+# -enable-llcbeta Enable testing of beta features in llc.
+# -enable-lli Enable testing of lli (interpreter) features, default is off
+# -disable-pic Disable building with Position Independent Code.
+# -disable-llc Disable LLC tests in the nightly tester.
+# -disable-jit Disable JIT tests in the nightly tester.
+# -disable-cbe Disable C backend tests in the nightly tester.
+# -disable-lto Disable link time optimization.
+# -test-cflags Next argument specifies that C compilation options that
+# override the default when running the testsuite.
+# -test-cxxflags Next argument specifies that C++ compilation options that
+# override the default when running the testsuite.
+# -extraflags Next argument specifies extra options that are passed to
+# compile the tests.
+# -noexternals Do not run the external tests (for cases where povray
+# or SPEC are not installed)
+# -with-externals Specify a directory where the external tests are located.
+#
+# OTHER OPTIONS:
+# -parallel Run parallel jobs with GNU Make (see -parallel-jobs).
+# -parallel-jobs The number of parallel Make jobs to use (default is two).
+# -verbose Turn on some debug output
+# -debug Print information useful only to maintainers of this script.
+# -nice Checkout/Configure/Build with "nice" to reduce impact
+# on busy servers.
+# -f2c Next argument specifies path to F2C utility
+# -gccpath Path to gcc/g++ used to build LLVM
+# -target Specify the target triplet
+# -cflags Next argument specifies that C compilation options that
+# override the default.
+# -cxxflags Next argument specifies that C++ compilation options that
+# override the default.
+# -ldflags Next argument specifies that linker options that override
+# the default.
+#
# CVSROOT is the CVS repository from which the tree will be checked out,
# specified either in the full :method:user@host:/dir syntax, or
# just /dir if using a local repo.
@@ -133,6 +145,7 @@
# Parse arguments...
#
##############################################################
+$CONFIG_PATH="";
$CONFIGUREARGS="";
$nickname="";
$NOTEST=0;
@@ -150,6 +163,7 @@
last if /^--$/; # Stop processing arguments on --
# List command line options here...
+ if (/^-config$/) { $CONFIG_PATH = "$ARGV[0]"; shift; next; }
if (/^-nocheckout$/) { $NOCHECKOUT = 1; next; }
if (/^-nocvsstats$/) { $NOCVSSTATS = 1; next; }
if (/^-noremove$/) { $NOREMOVE = 1; next; }
@@ -222,6 +236,10 @@
print "Unknown option: $_ : ignoring!\n";
}
+if (!($CONFIG_PATH eq "")) {
+ die "error: -config mode is not yet implemented,";
+}
+
if ($ENV{'LLVMGCCDIR'}) {
$CONFIGUREARGS .= " --with-llvmgccdir=" . $ENV{'LLVMGCCDIR'};
$LLVMGCCPATH = $ENV{'LLVMGCCDIR'} . '/bin';
@@ -265,7 +283,7 @@
##############################################################
#
-#define the file names we'll use
+# Define the file names we'll use
#
##############################################################
my $Prefix = "$WebDir/$DATE";
@@ -303,6 +321,7 @@
# Helper functions
#
##############################################################
+
sub GetDir {
my $Suffix = shift;
opendir DH, $WebDir;
@@ -499,10 +518,10 @@
# to our central server via the post method
#
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-sub SendData{
+sub SendData {
$host = $_[0];
$file = $_[1];
- $variables=$_[2];
+ $variables = $_[2];
# Write out the "...-sentdata.txt" file.
@@ -517,7 +536,7 @@
system "$SUBMITAUX \"$Prefix-sentdata.txt\"";
}
- if (!$SUBMIT) {
+ if (!$SUBMIT) {
return "Skipped standard submit.\n";
}
@@ -531,9 +550,9 @@
}
# Send the data to the server.
- #
+ #
# FIXME: This code should be more robust?
-
+
$port=80;
$socketaddr= sockaddr_in $port, inet_aton $host or die "Bad hostname\n";
socket SOCK, PF_INET, SOCK_STREAM, getprotobyname('tcp') or