| //===- LoopStrengthReduce.cpp - Strength Reduce GEPs in Loops -------------===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This pass performs a strength reduction on array references inside loops that |
| // have as one or more of their components the loop induction variable. This is |
| // accomplished by creating a new Value to hold the initial value of the array |
| // access for the first iteration, and then creating a new GEP instruction in |
| // the loop to increment the value by the appropriate amount. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #define DEBUG_TYPE "loop-reduce" |
| #include "llvm/Transforms/Scalar.h" |
| #include "llvm/Constants.h" |
| #include "llvm/Instructions.h" |
| #include "llvm/IntrinsicInst.h" |
| #include "llvm/Type.h" |
| #include "llvm/DerivedTypes.h" |
| #include "llvm/Analysis/Dominators.h" |
| #include "llvm/Analysis/LoopInfo.h" |
| #include "llvm/Analysis/LoopPass.h" |
| #include "llvm/Analysis/ScalarEvolutionExpander.h" |
| #include "llvm/Support/CFG.h" |
| #include "llvm/Support/GetElementPtrTypeIterator.h" |
| #include "llvm/Transforms/Utils/BasicBlockUtils.h" |
| #include "llvm/Transforms/Utils/Local.h" |
| #include "llvm/Target/TargetData.h" |
| #include "llvm/ADT/SmallPtrSet.h" |
| #include "llvm/ADT/Statistic.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/Compiler.h" |
| #include "llvm/Target/TargetLowering.h" |
| #include <algorithm> |
| #include <set> |
| using namespace llvm; |
| |
| STATISTIC(NumReduced , "Number of GEPs strength reduced"); |
| STATISTIC(NumInserted, "Number of PHIs inserted"); |
| STATISTIC(NumVariable, "Number of PHIs with variable strides"); |
| STATISTIC(NumEliminated, "Number of strides eliminated"); |
| STATISTIC(NumShadow, "Number of Shadow IVs optimized"); |
| |
| namespace { |
| |
| struct BasedUser; |
| |
| /// IVStrideUse - Keep track of one use of a strided induction variable, where |
| /// the stride is stored externally. The Offset member keeps track of the |
| /// offset from the IV, User is the actual user of the operand, and |
| /// 'OperandValToReplace' is the operand of the User that is the use. |
| struct VISIBILITY_HIDDEN IVStrideUse { |
| SCEVHandle Offset; |
| Instruction *User; |
| Value *OperandValToReplace; |
| |
| // isUseOfPostIncrementedValue - True if this should use the |
| // post-incremented version of this IV, not the preincremented version. |
| // This can only be set in special cases, such as the terminating setcc |
| // instruction for a loop or uses dominated by the loop. |
| bool isUseOfPostIncrementedValue; |
| |
| IVStrideUse(const SCEVHandle &Offs, Instruction *U, Value *O) |
| : Offset(Offs), User(U), OperandValToReplace(O), |
| isUseOfPostIncrementedValue(false) {} |
| }; |
| |
| /// IVUsersOfOneStride - This structure keeps track of all instructions that |
| /// have an operand that is based on the trip count multiplied by some stride. |
| /// The stride for all of these users is common and kept external to this |
| /// structure. |
| struct VISIBILITY_HIDDEN IVUsersOfOneStride { |
| /// Users - Keep track of all of the users of this stride as well as the |
| /// initial value and the operand that uses the IV. |
| std::vector<IVStrideUse> Users; |
| |
| void addUser(const SCEVHandle &Offset,Instruction *User, Value *Operand) { |
| Users.push_back(IVStrideUse(Offset, User, Operand)); |
| } |
| }; |
| |
| /// IVInfo - This structure keeps track of one IV expression inserted during |
| /// StrengthReduceStridedIVUsers. It contains the stride, the common base, as |
| /// well as the PHI node and increment value created for rewrite. |
| struct VISIBILITY_HIDDEN IVExpr { |
| SCEVHandle Stride; |
| SCEVHandle Base; |
| PHINode *PHI; |
| Value *IncV; |
| |
| IVExpr(const SCEVHandle &stride, const SCEVHandle &base, PHINode *phi, |
| Value *incv) |
| : Stride(stride), Base(base), PHI(phi), IncV(incv) {} |
| }; |
| |
| /// IVsOfOneStride - This structure keeps track of all IV expression inserted |
| /// during StrengthReduceStridedIVUsers for a particular stride of the IV. |
| struct VISIBILITY_HIDDEN IVsOfOneStride { |
| std::vector<IVExpr> IVs; |
| |
| void addIV(const SCEVHandle &Stride, const SCEVHandle &Base, PHINode *PHI, |
| Value *IncV) { |
| IVs.push_back(IVExpr(Stride, Base, PHI, IncV)); |
| } |
| }; |
| |
| class VISIBILITY_HIDDEN LoopStrengthReduce : public LoopPass { |
| LoopInfo *LI; |
| DominatorTree *DT; |
| ScalarEvolution *SE; |
| const TargetData *TD; |
| const Type *UIntPtrTy; |
| bool Changed; |
| |
| /// IVUsesByStride - Keep track of all uses of induction variables that we |
| /// are interested in. The key of the map is the stride of the access. |
| std::map<SCEVHandle, IVUsersOfOneStride> IVUsesByStride; |
| |
| /// IVsByStride - Keep track of all IVs that have been inserted for a |
| /// particular stride. |
| std::map<SCEVHandle, IVsOfOneStride> IVsByStride; |
| |
| /// StrideOrder - An ordering of the keys in IVUsesByStride that is stable: |
| /// We use this to iterate over the IVUsesByStride collection without being |
| /// dependent on random ordering of pointers in the process. |
| SmallVector<SCEVHandle, 16> StrideOrder; |
| |
| /// CastedValues - As we need to cast values to uintptr_t, this keeps track |
| /// of the casted version of each value. This is accessed by |
| /// getCastedVersionOf. |
| DenseMap<Value*, Value*> CastedPointers; |
| |
| /// DeadInsts - Keep track of instructions we may have made dead, so that |
| /// we can remove them after we are done working. |
| SmallVector<Instruction*, 16> DeadInsts; |
| |
| /// TLI - Keep a pointer of a TargetLowering to consult for determining |
| /// transformation profitability. |
| const TargetLowering *TLI; |
| |
| public: |
| static char ID; // Pass ID, replacement for typeid |
| explicit LoopStrengthReduce(const TargetLowering *tli = NULL) : |
| LoopPass(&ID), TLI(tli) { |
| } |
| |
| bool runOnLoop(Loop *L, LPPassManager &LPM); |
| |
| virtual void getAnalysisUsage(AnalysisUsage &AU) const { |
| // We split critical edges, so we change the CFG. However, we do update |
| // many analyses if they are around. |
| AU.addPreservedID(LoopSimplifyID); |
| AU.addPreserved<LoopInfo>(); |
| AU.addPreserved<DominanceFrontier>(); |
| AU.addPreserved<DominatorTree>(); |
| |
| AU.addRequiredID(LoopSimplifyID); |
| AU.addRequired<LoopInfo>(); |
| AU.addRequired<DominatorTree>(); |
| AU.addRequired<TargetData>(); |
| AU.addRequired<ScalarEvolution>(); |
| AU.addPreserved<ScalarEvolution>(); |
| } |
| |
| /// getCastedVersionOf - Return the specified value casted to uintptr_t. |
| /// |
| Value *getCastedVersionOf(Instruction::CastOps opcode, Value *V); |
| private: |
| bool AddUsersIfInteresting(Instruction *I, Loop *L, |
| SmallPtrSet<Instruction*,16> &Processed); |
| SCEVHandle GetExpressionSCEV(Instruction *E); |
| ICmpInst *ChangeCompareStride(Loop *L, ICmpInst *Cond, |
| IVStrideUse* &CondUse, |
| const SCEVHandle* &CondStride); |
| void OptimizeIndvars(Loop *L); |
| |
| /// OptimizeShadowIV - If IV is used in a int-to-float cast |
| /// inside the loop then try to eliminate the cast opeation. |
| void OptimizeShadowIV(Loop *L); |
| |
| /// OptimizeSMax - Rewrite the loop's terminating condition |
| /// if it uses an smax computation. |
| ICmpInst *OptimizeSMax(Loop *L, ICmpInst *Cond, |
| IVStrideUse* &CondUse); |
| |
| bool FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse, |
| const SCEVHandle *&CondStride); |
| bool RequiresTypeConversion(const Type *Ty, const Type *NewTy); |
| int64_t CheckForIVReuse(bool, bool, bool, const SCEVHandle&, |
| IVExpr&, const Type*, |
| const std::vector<BasedUser>& UsersToProcess); |
| bool ValidStride(bool, int64_t, |
| const std::vector<BasedUser>& UsersToProcess); |
| SCEVHandle CollectIVUsers(const SCEVHandle &Stride, |
| IVUsersOfOneStride &Uses, |
| Loop *L, |
| bool &AllUsesAreAddresses, |
| bool &AllUsesAreOutsideLoop, |
| std::vector<BasedUser> &UsersToProcess); |
| void StrengthReduceStridedIVUsers(const SCEVHandle &Stride, |
| IVUsersOfOneStride &Uses, |
| Loop *L, bool isOnlyStride); |
| void DeleteTriviallyDeadInstructions(); |
| }; |
| } |
| |
| char LoopStrengthReduce::ID = 0; |
| static RegisterPass<LoopStrengthReduce> |
| X("loop-reduce", "Loop Strength Reduction"); |
| |
| Pass *llvm::createLoopStrengthReducePass(const TargetLowering *TLI) { |
| return new LoopStrengthReduce(TLI); |
| } |
| |
| /// getCastedVersionOf - Return the specified value casted to uintptr_t. This |
| /// assumes that the Value* V is of integer or pointer type only. |
| /// |
| Value *LoopStrengthReduce::getCastedVersionOf(Instruction::CastOps opcode, |
| Value *V) { |
| if (V->getType() == UIntPtrTy) return V; |
| if (Constant *CB = dyn_cast<Constant>(V)) |
| return ConstantExpr::getCast(opcode, CB, UIntPtrTy); |
| |
| Value *&New = CastedPointers[V]; |
| if (New) return New; |
| |
| New = SCEVExpander::InsertCastOfTo(opcode, V, UIntPtrTy); |
| DeadInsts.push_back(cast<Instruction>(New)); |
| return New; |
| } |
| |
| |
| /// DeleteTriviallyDeadInstructions - If any of the instructions is the |
| /// specified set are trivially dead, delete them and see if this makes any of |
| /// their operands subsequently dead. |
| void LoopStrengthReduce::DeleteTriviallyDeadInstructions() { |
| if (DeadInsts.empty()) return; |
| |
| // Sort the deadinsts list so that we can trivially eliminate duplicates as we |
| // go. The code below never adds a non-dead instruction to the worklist, but |
| // callers may not be so careful. |
| array_pod_sort(DeadInsts.begin(), DeadInsts.end()); |
| |
| // Drop duplicate instructions and those with uses. |
| for (unsigned i = 0, e = DeadInsts.size()-1; i < e; ++i) { |
| Instruction *I = DeadInsts[i]; |
| if (!I->use_empty()) DeadInsts[i] = 0; |
| while (i != e && DeadInsts[i+1] == I) |
| DeadInsts[++i] = 0; |
| } |
| |
| while (!DeadInsts.empty()) { |
| Instruction *I = DeadInsts.back(); |
| DeadInsts.pop_back(); |
| |
| if (I == 0 || !isInstructionTriviallyDead(I)) |
| continue; |
| |
| SE->deleteValueFromRecords(I); |
| |
| for (User::op_iterator OI = I->op_begin(), E = I->op_end(); OI != E; ++OI) { |
| if (Instruction *U = dyn_cast<Instruction>(*OI)) { |
| *OI = 0; |
| if (U->use_empty()) |
| DeadInsts.push_back(U); |
| } |
| } |
| |
| I->eraseFromParent(); |
| Changed = true; |
| } |
| } |
| |
| |
| /// GetExpressionSCEV - Compute and return the SCEV for the specified |
| /// instruction. |
| SCEVHandle LoopStrengthReduce::GetExpressionSCEV(Instruction *Exp) { |
| // Pointer to pointer bitcast instructions return the same value as their |
| // operand. |
| if (BitCastInst *BCI = dyn_cast<BitCastInst>(Exp)) { |
| if (SE->hasSCEV(BCI) || !isa<Instruction>(BCI->getOperand(0))) |
| return SE->getSCEV(BCI); |
| SCEVHandle R = GetExpressionSCEV(cast<Instruction>(BCI->getOperand(0))); |
| SE->setSCEV(BCI, R); |
| return R; |
| } |
| |
| // Scalar Evolutions doesn't know how to compute SCEV's for GEP instructions. |
| // If this is a GEP that SE doesn't know about, compute it now and insert it. |
| // If this is not a GEP, or if we have already done this computation, just let |
| // SE figure it out. |
| GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(Exp); |
| if (!GEP || SE->hasSCEV(GEP)) |
| return SE->getSCEV(Exp); |
| |
| // Analyze all of the subscripts of this getelementptr instruction, looking |
| // for uses that are determined by the trip count of the loop. First, skip |
| // all operands the are not dependent on the IV. |
| |
| // Build up the base expression. Insert an LLVM cast of the pointer to |
| // uintptr_t first. |
| SCEVHandle GEPVal = SE->getUnknown( |
| getCastedVersionOf(Instruction::PtrToInt, GEP->getOperand(0))); |
| |
| gep_type_iterator GTI = gep_type_begin(GEP); |
| |
| for (User::op_iterator i = GEP->op_begin() + 1, e = GEP->op_end(); |
| i != e; ++i, ++GTI) { |
| // If this is a use of a recurrence that we can analyze, and it comes before |
| // Op does in the GEP operand list, we will handle this when we process this |
| // operand. |
| if (const StructType *STy = dyn_cast<StructType>(*GTI)) { |
| const StructLayout *SL = TD->getStructLayout(STy); |
| unsigned Idx = cast<ConstantInt>(*i)->getZExtValue(); |
| uint64_t Offset = SL->getElementOffset(Idx); |
| GEPVal = SE->getAddExpr(GEPVal, |
| SE->getIntegerSCEV(Offset, UIntPtrTy)); |
| } else { |
| unsigned GEPOpiBits = |
| (*i)->getType()->getPrimitiveSizeInBits(); |
| unsigned IntPtrBits = UIntPtrTy->getPrimitiveSizeInBits(); |
| Instruction::CastOps opcode = (GEPOpiBits < IntPtrBits ? |
| Instruction::SExt : (GEPOpiBits > IntPtrBits ? Instruction::Trunc : |
| Instruction::BitCast)); |
| Value *OpVal = getCastedVersionOf(opcode, *i); |
| SCEVHandle Idx = SE->getSCEV(OpVal); |
| |
| uint64_t TypeSize = TD->getTypePaddedSize(GTI.getIndexedType()); |
| if (TypeSize != 1) |
| Idx = SE->getMulExpr(Idx, |
| SE->getConstant(ConstantInt::get(UIntPtrTy, |
| TypeSize))); |
| GEPVal = SE->getAddExpr(GEPVal, Idx); |
| } |
| } |
| |
| SE->setSCEV(GEP, GEPVal); |
| return GEPVal; |
| } |
| |
| /// getSCEVStartAndStride - Compute the start and stride of this expression, |
| /// returning false if the expression is not a start/stride pair, or true if it |
| /// is. The stride must be a loop invariant expression, but the start may be |
| /// a mix of loop invariant and loop variant expressions. |
| static bool getSCEVStartAndStride(const SCEVHandle &SH, Loop *L, |
| SCEVHandle &Start, SCEVHandle &Stride, |
| ScalarEvolution *SE) { |
| SCEVHandle TheAddRec = Start; // Initialize to zero. |
| |
| // If the outer level is an AddExpr, the operands are all start values except |
| // for a nested AddRecExpr. |
| if (SCEVAddExpr *AE = dyn_cast<SCEVAddExpr>(SH)) { |
| for (unsigned i = 0, e = AE->getNumOperands(); i != e; ++i) |
| if (SCEVAddRecExpr *AddRec = |
| dyn_cast<SCEVAddRecExpr>(AE->getOperand(i))) { |
| if (AddRec->getLoop() == L) |
| TheAddRec = SE->getAddExpr(AddRec, TheAddRec); |
| else |
| return false; // Nested IV of some sort? |
| } else { |
| Start = SE->getAddExpr(Start, AE->getOperand(i)); |
| } |
| |
| } else if (isa<SCEVAddRecExpr>(SH)) { |
| TheAddRec = SH; |
| } else { |
| return false; // not analyzable. |
| } |
| |
| SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(TheAddRec); |
| if (!AddRec || AddRec->getLoop() != L) return false; |
| |
| // FIXME: Generalize to non-affine IV's. |
| if (!AddRec->isAffine()) return false; |
| |
| Start = SE->getAddExpr(Start, AddRec->getOperand(0)); |
| |
| if (!isa<SCEVConstant>(AddRec->getOperand(1))) |
| DOUT << "[" << L->getHeader()->getName() |
| << "] Variable stride: " << *AddRec << "\n"; |
| |
| Stride = AddRec->getOperand(1); |
| return true; |
| } |
| |
| /// IVUseShouldUsePostIncValue - We have discovered a "User" of an IV expression |
| /// and now we need to decide whether the user should use the preinc or post-inc |
| /// value. If this user should use the post-inc version of the IV, return true. |
| /// |
| /// Choosing wrong here can break dominance properties (if we choose to use the |
| /// post-inc value when we cannot) or it can end up adding extra live-ranges to |
| /// the loop, resulting in reg-reg copies (if we use the pre-inc value when we |
| /// should use the post-inc value). |
| static bool IVUseShouldUsePostIncValue(Instruction *User, Instruction *IV, |
| Loop *L, DominatorTree *DT, Pass *P, |
| SmallVectorImpl<Instruction*> &DeadInsts){ |
| // If the user is in the loop, use the preinc value. |
| if (L->contains(User->getParent())) return false; |
| |
| BasicBlock *LatchBlock = L->getLoopLatch(); |
| |
| // Ok, the user is outside of the loop. If it is dominated by the latch |
| // block, use the post-inc value. |
| if (DT->dominates(LatchBlock, User->getParent())) |
| return true; |
| |
| // There is one case we have to be careful of: PHI nodes. These little guys |
| // can live in blocks that do not dominate the latch block, but (since their |
| // uses occur in the predecessor block, not the block the PHI lives in) should |
| // still use the post-inc value. Check for this case now. |
| PHINode *PN = dyn_cast<PHINode>(User); |
| if (!PN) return false; // not a phi, not dominated by latch block. |
| |
| // Look at all of the uses of IV by the PHI node. If any use corresponds to |
| // a block that is not dominated by the latch block, give up and use the |
| // preincremented value. |
| unsigned NumUses = 0; |
| for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) |
| if (PN->getIncomingValue(i) == IV) { |
| ++NumUses; |
| if (!DT->dominates(LatchBlock, PN->getIncomingBlock(i))) |
| return false; |
| } |
| |
| // Okay, all uses of IV by PN are in predecessor blocks that really are |
| // dominated by the latch block. Split the critical edges and use the |
| // post-incremented value. |
| for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) |
| if (PN->getIncomingValue(i) == IV) { |
| SplitCriticalEdge(PN->getIncomingBlock(i), PN->getParent(), P, false); |
| // Splitting the critical edge can reduce the number of entries in this |
| // PHI. |
| e = PN->getNumIncomingValues(); |
| if (--NumUses == 0) break; |
| } |
| |
| // PHI node might have become a constant value after SplitCriticalEdge. |
| DeadInsts.push_back(User); |
| |
| return true; |
| } |
| |
| /// isAddress - Returns true if the specified instruction is using the |
| /// specified value as an address. |
| static bool isAddressUse(Instruction *Inst, Value *OperandVal) { |
| bool isAddress = isa<LoadInst>(Inst); |
| if (StoreInst *SI = dyn_cast<StoreInst>(Inst)) { |
| if (SI->getOperand(1) == OperandVal) |
| isAddress = true; |
| } else if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(Inst)) { |
| // Addressing modes can also be folded into prefetches and a variety |
| // of intrinsics. |
| switch (II->getIntrinsicID()) { |
| default: break; |
| case Intrinsic::prefetch: |
| case Intrinsic::x86_sse2_loadu_dq: |
| case Intrinsic::x86_sse2_loadu_pd: |
| case Intrinsic::x86_sse_loadu_ps: |
| case Intrinsic::x86_sse_storeu_ps: |
| case Intrinsic::x86_sse2_storeu_pd: |
| case Intrinsic::x86_sse2_storeu_dq: |
| case Intrinsic::x86_sse2_storel_dq: |
| if (II->getOperand(1) == OperandVal) |
| isAddress = true; |
| break; |
| } |
| } |
| return isAddress; |
| } |
| |
| /// AddUsersIfInteresting - Inspect the specified instruction. If it is a |
| /// reducible SCEV, recursively add its users to the IVUsesByStride set and |
| /// return true. Otherwise, return false. |
| bool LoopStrengthReduce::AddUsersIfInteresting(Instruction *I, Loop *L, |
| SmallPtrSet<Instruction*,16> &Processed) { |
| if (!I->getType()->isInteger() && !isa<PointerType>(I->getType())) |
| return false; // Void and FP expressions cannot be reduced. |
| if (!Processed.insert(I)) |
| return true; // Instruction already handled. |
| |
| // Get the symbolic expression for this instruction. |
| SCEVHandle ISE = GetExpressionSCEV(I); |
| if (isa<SCEVCouldNotCompute>(ISE)) return false; |
| |
| // Get the start and stride for this expression. |
| SCEVHandle Start = SE->getIntegerSCEV(0, ISE->getType()); |
| SCEVHandle Stride = Start; |
| if (!getSCEVStartAndStride(ISE, L, Start, Stride, SE)) |
| return false; // Non-reducible symbolic expression, bail out. |
| |
| std::vector<Instruction *> IUsers; |
| // Collect all I uses now because IVUseShouldUsePostIncValue may |
| // invalidate use_iterator. |
| for (Value::use_iterator UI = I->use_begin(), E = I->use_end(); UI != E; ++UI) |
| IUsers.push_back(cast<Instruction>(*UI)); |
| |
| for (unsigned iused_index = 0, iused_size = IUsers.size(); |
| iused_index != iused_size; ++iused_index) { |
| |
| Instruction *User = IUsers[iused_index]; |
| |
| // Do not infinitely recurse on PHI nodes. |
| if (isa<PHINode>(User) && Processed.count(User)) |
| continue; |
| |
| // If this is an instruction defined in a nested loop, or outside this loop, |
| // don't recurse into it. |
| bool AddUserToIVUsers = false; |
| if (LI->getLoopFor(User->getParent()) != L) { |
| DOUT << "FOUND USER in other loop: " << *User |
| << " OF SCEV: " << *ISE << "\n"; |
| AddUserToIVUsers = true; |
| } else if (!AddUsersIfInteresting(User, L, Processed)) { |
| DOUT << "FOUND USER: " << *User |
| << " OF SCEV: " << *ISE << "\n"; |
| AddUserToIVUsers = true; |
| } |
| |
| if (AddUserToIVUsers) { |
| IVUsersOfOneStride &StrideUses = IVUsesByStride[Stride]; |
| if (StrideUses.Users.empty()) // First occurrence of this stride? |
| StrideOrder.push_back(Stride); |
| |
| // Okay, we found a user that we cannot reduce. Analyze the instruction |
| // and decide what to do with it. If we are a use inside of the loop, use |
| // the value before incrementation, otherwise use it after incrementation. |
| if (IVUseShouldUsePostIncValue(User, I, L, DT, this, DeadInsts)) { |
| // The value used will be incremented by the stride more than we are |
| // expecting, so subtract this off. |
| SCEVHandle NewStart = SE->getMinusSCEV(Start, Stride); |
| StrideUses.addUser(NewStart, User, I); |
| StrideUses.Users.back().isUseOfPostIncrementedValue = true; |
| DOUT << " USING POSTINC SCEV, START=" << *NewStart<< "\n"; |
| } else { |
| StrideUses.addUser(Start, User, I); |
| } |
| } |
| } |
| return true; |
| } |
| |
| namespace { |
| /// BasedUser - For a particular base value, keep information about how we've |
| /// partitioned the expression so far. |
| struct BasedUser { |
| /// SE - The current ScalarEvolution object. |
| ScalarEvolution *SE; |
| |
| /// Base - The Base value for the PHI node that needs to be inserted for |
| /// this use. As the use is processed, information gets moved from this |
| /// field to the Imm field (below). BasedUser values are sorted by this |
| /// field. |
| SCEVHandle Base; |
| |
| /// Inst - The instruction using the induction variable. |
| Instruction *Inst; |
| |
| /// OperandValToReplace - The operand value of Inst to replace with the |
| /// EmittedBase. |
| Value *OperandValToReplace; |
| |
| /// Imm - The immediate value that should be added to the base immediately |
| /// before Inst, because it will be folded into the imm field of the |
| /// instruction. |
| SCEVHandle Imm; |
| |
| // isUseOfPostIncrementedValue - True if this should use the |
| // post-incremented version of this IV, not the preincremented version. |
| // This can only be set in special cases, such as the terminating setcc |
| // instruction for a loop and uses outside the loop that are dominated by |
| // the loop. |
| bool isUseOfPostIncrementedValue; |
| |
| BasedUser(IVStrideUse &IVSU, ScalarEvolution *se) |
| : SE(se), Base(IVSU.Offset), Inst(IVSU.User), |
| OperandValToReplace(IVSU.OperandValToReplace), |
| Imm(SE->getIntegerSCEV(0, Base->getType())), |
| isUseOfPostIncrementedValue(IVSU.isUseOfPostIncrementedValue) {} |
| |
| // Once we rewrite the code to insert the new IVs we want, update the |
| // operands of Inst to use the new expression 'NewBase', with 'Imm' added |
| // to it. |
| void RewriteInstructionToUseNewBase(const SCEVHandle &NewBase, |
| Instruction *InsertPt, |
| SCEVExpander &Rewriter, Loop *L, Pass *P, |
| SmallVectorImpl<Instruction*> &DeadInsts); |
| |
| Value *InsertCodeForBaseAtPosition(const SCEVHandle &NewBase, |
| SCEVExpander &Rewriter, |
| Instruction *IP, Loop *L); |
| void dump() const; |
| }; |
| } |
| |
| void BasedUser::dump() const { |
| cerr << " Base=" << *Base; |
| cerr << " Imm=" << *Imm; |
| cerr << " Inst: " << *Inst; |
| } |
| |
| Value *BasedUser::InsertCodeForBaseAtPosition(const SCEVHandle &NewBase, |
| SCEVExpander &Rewriter, |
| Instruction *IP, Loop *L) { |
| // Figure out where we *really* want to insert this code. In particular, if |
| // the user is inside of a loop that is nested inside of L, we really don't |
| // want to insert this expression before the user, we'd rather pull it out as |
| // many loops as possible. |
| LoopInfo &LI = Rewriter.getLoopInfo(); |
| Instruction *BaseInsertPt = IP; |
| |
| // Figure out the most-nested loop that IP is in. |
| Loop *InsertLoop = LI.getLoopFor(IP->getParent()); |
| |
| // If InsertLoop is not L, and InsertLoop is nested inside of L, figure out |
| // the preheader of the outer-most loop where NewBase is not loop invariant. |
| if (L->contains(IP->getParent())) |
| while (InsertLoop && NewBase->isLoopInvariant(InsertLoop)) { |
| BaseInsertPt = InsertLoop->getLoopPreheader()->getTerminator(); |
| InsertLoop = InsertLoop->getParentLoop(); |
| } |
| |
| // If there is no immediate value, skip the next part. |
| if (Imm->isZero()) |
| return Rewriter.expandCodeFor(NewBase, BaseInsertPt); |
| |
| Value *Base = Rewriter.expandCodeFor(NewBase, BaseInsertPt); |
| |
| // If we are inserting the base and imm values in the same block, make sure to |
| // adjust the IP position if insertion reused a result. |
| if (IP == BaseInsertPt) |
| IP = Rewriter.getInsertionPoint(); |
| |
| // Always emit the immediate (if non-zero) into the same block as the user. |
| SCEVHandle NewValSCEV = SE->getAddExpr(SE->getUnknown(Base), Imm); |
| return Rewriter.expandCodeFor(NewValSCEV, IP); |
| |
| } |
| |
| |
| // Once we rewrite the code to insert the new IVs we want, update the |
| // operands of Inst to use the new expression 'NewBase', with 'Imm' added |
| // to it. NewBasePt is the last instruction which contributes to the |
| // value of NewBase in the case that it's a diffferent instruction from |
| // the PHI that NewBase is computed from, or null otherwise. |
| // |
| void BasedUser::RewriteInstructionToUseNewBase(const SCEVHandle &NewBase, |
| Instruction *NewBasePt, |
| SCEVExpander &Rewriter, Loop *L, Pass *P, |
| SmallVectorImpl<Instruction*> &DeadInsts){ |
| if (!isa<PHINode>(Inst)) { |
| // By default, insert code at the user instruction. |
| BasicBlock::iterator InsertPt = Inst; |
| |
| // However, if the Operand is itself an instruction, the (potentially |
| // complex) inserted code may be shared by many users. Because of this, we |
| // want to emit code for the computation of the operand right before its old |
| // computation. This is usually safe, because we obviously used to use the |
| // computation when it was computed in its current block. However, in some |
| // cases (e.g. use of a post-incremented induction variable) the NewBase |
| // value will be pinned to live somewhere after the original computation. |
| // In this case, we have to back off. |
| // |
| // If this is a use outside the loop (which means after, since it is based |
| // on a loop indvar) we use the post-incremented value, so that we don't |
| // artificially make the preinc value live out the bottom of the loop. |
| if (!isUseOfPostIncrementedValue && L->contains(Inst->getParent())) { |
| if (NewBasePt && isa<PHINode>(OperandValToReplace)) { |
| InsertPt = NewBasePt; |
| ++InsertPt; |
| } else if (Instruction *OpInst |
| = dyn_cast<Instruction>(OperandValToReplace)) { |
| InsertPt = OpInst; |
| while (isa<PHINode>(InsertPt)) ++InsertPt; |
| } |
| } |
| Value *NewVal = InsertCodeForBaseAtPosition(NewBase, Rewriter, InsertPt, L); |
| // Adjust the type back to match the Inst. Note that we can't use InsertPt |
| // here because the SCEVExpander may have inserted the instructions after |
| // that point, in its efforts to avoid inserting redundant expressions. |
| if (isa<PointerType>(OperandValToReplace->getType())) { |
| NewVal = SCEVExpander::InsertCastOfTo(Instruction::IntToPtr, |
| NewVal, |
| OperandValToReplace->getType()); |
| } |
| // Replace the use of the operand Value with the new Phi we just created. |
| Inst->replaceUsesOfWith(OperandValToReplace, NewVal); |
| DOUT << " CHANGED: IMM =" << *Imm; |
| DOUT << " \tNEWBASE =" << *NewBase; |
| DOUT << " \tInst = " << *Inst; |
| return; |
| } |
| |
| // PHI nodes are more complex. We have to insert one copy of the NewBase+Imm |
| // expression into each operand block that uses it. Note that PHI nodes can |
| // have multiple entries for the same predecessor. We use a map to make sure |
| // that a PHI node only has a single Value* for each predecessor (which also |
| // prevents us from inserting duplicate code in some blocks). |
| DenseMap<BasicBlock*, Value*> InsertedCode; |
| PHINode *PN = cast<PHINode>(Inst); |
| for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) { |
| if (PN->getIncomingValue(i) == OperandValToReplace) { |
| // If this is a critical edge, split the edge so that we do not insert the |
| // code on all predecessor/successor paths. We do this unless this is the |
| // canonical backedge for this loop, as this can make some inserted code |
| // be in an illegal position. |
| BasicBlock *PHIPred = PN->getIncomingBlock(i); |
| if (e != 1 && PHIPred->getTerminator()->getNumSuccessors() > 1 && |
| (PN->getParent() != L->getHeader() || !L->contains(PHIPred))) { |
| |
| // First step, split the critical edge. |
| SplitCriticalEdge(PHIPred, PN->getParent(), P, false); |
| |
| // Next step: move the basic block. In particular, if the PHI node |
| // is outside of the loop, and PredTI is in the loop, we want to |
| // move the block to be immediately before the PHI block, not |
| // immediately after PredTI. |
| if (L->contains(PHIPred) && !L->contains(PN->getParent())) { |
| BasicBlock *NewBB = PN->getIncomingBlock(i); |
| NewBB->moveBefore(PN->getParent()); |
| } |
| |
| // Splitting the edge can reduce the number of PHI entries we have. |
| e = PN->getNumIncomingValues(); |
| } |
| |
| Value *&Code = InsertedCode[PN->getIncomingBlock(i)]; |
| if (!Code) { |
| // Insert the code into the end of the predecessor block. |
| Instruction *InsertPt = PN->getIncomingBlock(i)->getTerminator(); |
| Code = InsertCodeForBaseAtPosition(NewBase, Rewriter, InsertPt, L); |
| |
| // Adjust the type back to match the PHI. Note that we can't use |
| // InsertPt here because the SCEVExpander may have inserted its |
| // instructions after that point, in its efforts to avoid inserting |
| // redundant expressions. |
| if (isa<PointerType>(PN->getType())) { |
| Code = SCEVExpander::InsertCastOfTo(Instruction::IntToPtr, |
| Code, |
| PN->getType()); |
| } |
| } |
| |
| // Replace the use of the operand Value with the new Phi we just created. |
| PN->setIncomingValue(i, Code); |
| Rewriter.clear(); |
| } |
| } |
| |
| // PHI node might have become a constant value after SplitCriticalEdge. |
| DeadInsts.push_back(Inst); |
| |
| DOUT << " CHANGED: IMM =" << *Imm << " Inst = " << *Inst; |
| } |
| |
| |
| /// fitsInAddressMode - Return true if V can be subsumed within an addressing |
| /// mode, and does not need to be put in a register first. |
| static bool fitsInAddressMode(const SCEVHandle &V, const Type *UseTy, |
| const TargetLowering *TLI, bool HasBaseReg) { |
| if (SCEVConstant *SC = dyn_cast<SCEVConstant>(V)) { |
| int64_t VC = SC->getValue()->getSExtValue(); |
| if (TLI) { |
| TargetLowering::AddrMode AM; |
| AM.BaseOffs = VC; |
| AM.HasBaseReg = HasBaseReg; |
| return TLI->isLegalAddressingMode(AM, UseTy); |
| } else { |
| // Defaults to PPC. PPC allows a sign-extended 16-bit immediate field. |
| return (VC > -(1 << 16) && VC < (1 << 16)-1); |
| } |
| } |
| |
| if (SCEVUnknown *SU = dyn_cast<SCEVUnknown>(V)) |
| if (ConstantExpr *CE = dyn_cast<ConstantExpr>(SU->getValue())) |
| if (TLI && CE->getOpcode() == Instruction::PtrToInt) { |
| Constant *Op0 = CE->getOperand(0); |
| if (GlobalValue *GV = dyn_cast<GlobalValue>(Op0)) { |
| TargetLowering::AddrMode AM; |
| AM.BaseGV = GV; |
| AM.HasBaseReg = HasBaseReg; |
| return TLI->isLegalAddressingMode(AM, UseTy); |
| } |
| } |
| return false; |
| } |
| |
| /// MoveLoopVariantsToImmediateField - Move any subexpressions from Val that are |
| /// loop varying to the Imm operand. |
| static void MoveLoopVariantsToImmediateField(SCEVHandle &Val, SCEVHandle &Imm, |
| Loop *L, ScalarEvolution *SE) { |
| if (Val->isLoopInvariant(L)) return; // Nothing to do. |
| |
| if (SCEVAddExpr *SAE = dyn_cast<SCEVAddExpr>(Val)) { |
| std::vector<SCEVHandle> NewOps; |
| NewOps.reserve(SAE->getNumOperands()); |
| |
| for (unsigned i = 0; i != SAE->getNumOperands(); ++i) |
| if (!SAE->getOperand(i)->isLoopInvariant(L)) { |
| // If this is a loop-variant expression, it must stay in the immediate |
| // field of the expression. |
| Imm = SE->getAddExpr(Imm, SAE->getOperand(i)); |
| } else { |
| NewOps.push_back(SAE->getOperand(i)); |
| } |
| |
| if (NewOps.empty()) |
| Val = SE->getIntegerSCEV(0, Val->getType()); |
| else |
| Val = SE->getAddExpr(NewOps); |
| } else if (SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Val)) { |
| // Try to pull immediates out of the start value of nested addrec's. |
| SCEVHandle Start = SARE->getStart(); |
| MoveLoopVariantsToImmediateField(Start, Imm, L, SE); |
| |
| std::vector<SCEVHandle> Ops(SARE->op_begin(), SARE->op_end()); |
| Ops[0] = Start; |
| Val = SE->getAddRecExpr(Ops, SARE->getLoop()); |
| } else { |
| // Otherwise, all of Val is variant, move the whole thing over. |
| Imm = SE->getAddExpr(Imm, Val); |
| Val = SE->getIntegerSCEV(0, Val->getType()); |
| } |
| } |
| |
| |
| /// MoveImmediateValues - Look at Val, and pull out any additions of constants |
| /// that can fit into the immediate field of instructions in the target. |
| /// Accumulate these immediate values into the Imm value. |
| static void MoveImmediateValues(const TargetLowering *TLI, |
| Instruction *User, |
| SCEVHandle &Val, SCEVHandle &Imm, |
| bool isAddress, Loop *L, |
| ScalarEvolution *SE) { |
| const Type *UseTy = User->getType(); |
| if (StoreInst *SI = dyn_cast<StoreInst>(User)) |
| UseTy = SI->getOperand(0)->getType(); |
| |
| if (SCEVAddExpr *SAE = dyn_cast<SCEVAddExpr>(Val)) { |
| std::vector<SCEVHandle> NewOps; |
| NewOps.reserve(SAE->getNumOperands()); |
| |
| for (unsigned i = 0; i != SAE->getNumOperands(); ++i) { |
| SCEVHandle NewOp = SAE->getOperand(i); |
| MoveImmediateValues(TLI, User, NewOp, Imm, isAddress, L, SE); |
| |
| if (!NewOp->isLoopInvariant(L)) { |
| // If this is a loop-variant expression, it must stay in the immediate |
| // field of the expression. |
| Imm = SE->getAddExpr(Imm, NewOp); |
| } else { |
| NewOps.push_back(NewOp); |
| } |
| } |
| |
| if (NewOps.empty()) |
| Val = SE->getIntegerSCEV(0, Val->getType()); |
| else |
| Val = SE->getAddExpr(NewOps); |
| return; |
| } else if (SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Val)) { |
| // Try to pull immediates out of the start value of nested addrec's. |
| SCEVHandle Start = SARE->getStart(); |
| MoveImmediateValues(TLI, User, Start, Imm, isAddress, L, SE); |
| |
| if (Start != SARE->getStart()) { |
| std::vector<SCEVHandle> Ops(SARE->op_begin(), SARE->op_end()); |
| Ops[0] = Start; |
| Val = SE->getAddRecExpr(Ops, SARE->getLoop()); |
| } |
| return; |
| } else if (SCEVMulExpr *SME = dyn_cast<SCEVMulExpr>(Val)) { |
| // Transform "8 * (4 + v)" -> "32 + 8*V" if "32" fits in the immed field. |
| if (isAddress && fitsInAddressMode(SME->getOperand(0), UseTy, TLI, false) && |
| SME->getNumOperands() == 2 && SME->isLoopInvariant(L)) { |
| |
| SCEVHandle SubImm = SE->getIntegerSCEV(0, Val->getType()); |
| SCEVHandle NewOp = SME->getOperand(1); |
| MoveImmediateValues(TLI, User, NewOp, SubImm, isAddress, L, SE); |
| |
| // If we extracted something out of the subexpressions, see if we can |
| // simplify this! |
| if (NewOp != SME->getOperand(1)) { |
| // Scale SubImm up by "8". If the result is a target constant, we are |
| // good. |
| SubImm = SE->getMulExpr(SubImm, SME->getOperand(0)); |
| if (fitsInAddressMode(SubImm, UseTy, TLI, false)) { |
| // Accumulate the immediate. |
| Imm = SE->getAddExpr(Imm, SubImm); |
| |
| // Update what is left of 'Val'. |
| Val = SE->getMulExpr(SME->getOperand(0), NewOp); |
| return; |
| } |
| } |
| } |
| } |
| |
| // Loop-variant expressions must stay in the immediate field of the |
| // expression. |
| if ((isAddress && fitsInAddressMode(Val, UseTy, TLI, false)) || |
| !Val->isLoopInvariant(L)) { |
| Imm = SE->getAddExpr(Imm, Val); |
| Val = SE->getIntegerSCEV(0, Val->getType()); |
| return; |
| } |
| |
| // Otherwise, no immediates to move. |
| } |
| |
| |
| /// SeparateSubExprs - Decompose Expr into all of the subexpressions that are |
| /// added together. This is used to reassociate common addition subexprs |
| /// together for maximal sharing when rewriting bases. |
| static void SeparateSubExprs(std::vector<SCEVHandle> &SubExprs, |
| SCEVHandle Expr, |
| ScalarEvolution *SE) { |
| if (SCEVAddExpr *AE = dyn_cast<SCEVAddExpr>(Expr)) { |
| for (unsigned j = 0, e = AE->getNumOperands(); j != e; ++j) |
| SeparateSubExprs(SubExprs, AE->getOperand(j), SE); |
| } else if (SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Expr)) { |
| SCEVHandle Zero = SE->getIntegerSCEV(0, Expr->getType()); |
| if (SARE->getOperand(0) == Zero) { |
| SubExprs.push_back(Expr); |
| } else { |
| // Compute the addrec with zero as its base. |
| std::vector<SCEVHandle> Ops(SARE->op_begin(), SARE->op_end()); |
| Ops[0] = Zero; // Start with zero base. |
| SubExprs.push_back(SE->getAddRecExpr(Ops, SARE->getLoop())); |
| |
| |
| SeparateSubExprs(SubExprs, SARE->getOperand(0), SE); |
| } |
| } else if (!Expr->isZero()) { |
| // Do not add zero. |
| SubExprs.push_back(Expr); |
| } |
| } |
| |
| // This is logically local to the following function, but C++ says we have |
| // to make it file scope. |
| struct SubExprUseData { unsigned Count; bool notAllUsesAreFree; }; |
| |
| /// RemoveCommonExpressionsFromUseBases - Look through all of the Bases of all |
| /// the Uses, removing any common subexpressions, except that if all such |
| /// subexpressions can be folded into an addressing mode for all uses inside |
| /// the loop (this case is referred to as "free" in comments herein) we do |
| /// not remove anything. This looks for things like (a+b+c) and |
| /// (a+c+d) and computes the common (a+c) subexpression. The common expression |
| /// is *removed* from the Bases and returned. |
| static SCEVHandle |
| RemoveCommonExpressionsFromUseBases(std::vector<BasedUser> &Uses, |
| ScalarEvolution *SE, Loop *L, |
| const TargetLowering *TLI) { |
| unsigned NumUses = Uses.size(); |
| |
| // Only one use? This is a very common case, so we handle it specially and |
| // cheaply. |
| SCEVHandle Zero = SE->getIntegerSCEV(0, Uses[0].Base->getType()); |
| SCEVHandle Result = Zero; |
| SCEVHandle FreeResult = Zero; |
| if (NumUses == 1) { |
| // If the use is inside the loop, use its base, regardless of what it is: |
| // it is clearly shared across all the IV's. If the use is outside the loop |
| // (which means after it) we don't want to factor anything *into* the loop, |
| // so just use 0 as the base. |
| if (L->contains(Uses[0].Inst->getParent())) |
| std::swap(Result, Uses[0].Base); |
| return Result; |
| } |
| |
| // To find common subexpressions, count how many of Uses use each expression. |
| // If any subexpressions are used Uses.size() times, they are common. |
| // Also track whether all uses of each expression can be moved into an |
| // an addressing mode "for free"; such expressions are left within the loop. |
| // struct SubExprUseData { unsigned Count; bool notAllUsesAreFree; }; |
| std::map<SCEVHandle, SubExprUseData> SubExpressionUseData; |
| |
| // UniqueSubExprs - Keep track of all of the subexpressions we see in the |
| // order we see them. |
| std::vector<SCEVHandle> UniqueSubExprs; |
| |
| std::vector<SCEVHandle> SubExprs; |
| unsigned NumUsesInsideLoop = 0; |
| for (unsigned i = 0; i != NumUses; ++i) { |
| // If the user is outside the loop, just ignore it for base computation. |
| // Since the user is outside the loop, it must be *after* the loop (if it |
| // were before, it could not be based on the loop IV). We don't want users |
| // after the loop to affect base computation of values *inside* the loop, |
| // because we can always add their offsets to the result IV after the loop |
| // is done, ensuring we get good code inside the loop. |
| if (!L->contains(Uses[i].Inst->getParent())) |
| continue; |
| NumUsesInsideLoop++; |
| |
| // If the base is zero (which is common), return zero now, there are no |
| // CSEs we can find. |
| if (Uses[i].Base == Zero) return Zero; |
| |
| // If this use is as an address we may be able to put CSEs in the addressing |
| // mode rather than hoisting them. |
| bool isAddrUse = isAddressUse(Uses[i].Inst, Uses[i].OperandValToReplace); |
| // We may need the UseTy below, but only when isAddrUse, so compute it |
| // only in that case. |
| const Type *UseTy = 0; |
| if (isAddrUse) { |
| UseTy = Uses[i].Inst->getType(); |
| if (StoreInst *SI = dyn_cast<StoreInst>(Uses[i].Inst)) |
| UseTy = SI->getOperand(0)->getType(); |
| } |
| |
| // Split the expression into subexprs. |
| SeparateSubExprs(SubExprs, Uses[i].Base, SE); |
| // Add one to SubExpressionUseData.Count for each subexpr present, and |
| // if the subexpr is not a valid immediate within an addressing mode use, |
| // set SubExpressionUseData.notAllUsesAreFree. We definitely want to |
| // hoist these out of the loop (if they are common to all uses). |
| for (unsigned j = 0, e = SubExprs.size(); j != e; ++j) { |
| if (++SubExpressionUseData[SubExprs[j]].Count == 1) |
| UniqueSubExprs.push_back(SubExprs[j]); |
| if (!isAddrUse || !fitsInAddressMode(SubExprs[j], UseTy, TLI, false)) |
| SubExpressionUseData[SubExprs[j]].notAllUsesAreFree = true; |
| } |
| SubExprs.clear(); |
| } |
| |
| // Now that we know how many times each is used, build Result. Iterate over |
| // UniqueSubexprs so that we have a stable ordering. |
| for (unsigned i = 0, e = UniqueSubExprs.size(); i != e; ++i) { |
| std::map<SCEVHandle, SubExprUseData>::iterator I = |
| SubExpressionUseData.find(UniqueSubExprs[i]); |
| assert(I != SubExpressionUseData.end() && "Entry not found?"); |
| if (I->second.Count == NumUsesInsideLoop) { // Found CSE! |
| if (I->second.notAllUsesAreFree) |
| Result = SE->getAddExpr(Result, I->first); |
| else |
| FreeResult = SE->getAddExpr(FreeResult, I->first); |
| } else |
| // Remove non-cse's from SubExpressionUseData. |
| SubExpressionUseData.erase(I); |
| } |
| |
| if (FreeResult != Zero) { |
| // We have some subexpressions that can be subsumed into addressing |
| // modes in every use inside the loop. However, it's possible that |
| // there are so many of them that the combined FreeResult cannot |
| // be subsumed, or that the target cannot handle both a FreeResult |
| // and a Result in the same instruction (for example because it would |
| // require too many registers). Check this. |
| for (unsigned i=0; i<NumUses; ++i) { |
| if (!L->contains(Uses[i].Inst->getParent())) |
| continue; |
| // We know this is an addressing mode use; if there are any uses that |
| // are not, FreeResult would be Zero. |
| const Type *UseTy = Uses[i].Inst->getType(); |
| if (StoreInst *SI = dyn_cast<StoreInst>(Uses[i].Inst)) |
| UseTy = SI->getOperand(0)->getType(); |
| if (!fitsInAddressMode(FreeResult, UseTy, TLI, Result!=Zero)) { |
| // FIXME: could split up FreeResult into pieces here, some hoisted |
| // and some not. There is no obvious advantage to this. |
| Result = SE->getAddExpr(Result, FreeResult); |
| FreeResult = Zero; |
| break; |
| } |
| } |
| } |
| |
| // If we found no CSE's, return now. |
| if (Result == Zero) return Result; |
| |
| // If we still have a FreeResult, remove its subexpressions from |
| // SubExpressionUseData. This means they will remain in the use Bases. |
| if (FreeResult != Zero) { |
| SeparateSubExprs(SubExprs, FreeResult, SE); |
| for (unsigned j = 0, e = SubExprs.size(); j != e; ++j) { |
| std::map<SCEVHandle, SubExprUseData>::iterator I = |
| SubExpressionUseData.find(SubExprs[j]); |
| SubExpressionUseData.erase(I); |
| } |
| SubExprs.clear(); |
| } |
| |
| // Otherwise, remove all of the CSE's we found from each of the base values. |
| for (unsigned i = 0; i != NumUses; ++i) { |
| // Uses outside the loop don't necessarily include the common base, but |
| // the final IV value coming into those uses does. Instead of trying to |
| // remove the pieces of the common base, which might not be there, |
| // subtract off the base to compensate for this. |
| if (!L->contains(Uses[i].Inst->getParent())) { |
| Uses[i].Base = SE->getMinusSCEV(Uses[i].Base, Result); |
| continue; |
| } |
| |
| // Split the expression into subexprs. |
| SeparateSubExprs(SubExprs, Uses[i].Base, SE); |
| |
| // Remove any common subexpressions. |
| for (unsigned j = 0, e = SubExprs.size(); j != e; ++j) |
| if (SubExpressionUseData.count(SubExprs[j])) { |
| SubExprs.erase(SubExprs.begin()+j); |
| --j; --e; |
| } |
| |
| // Finally, add the non-shared expressions together. |
| if (SubExprs.empty()) |
| Uses[i].Base = Zero; |
| else |
| Uses[i].Base = SE->getAddExpr(SubExprs); |
| SubExprs.clear(); |
| } |
| |
| return Result; |
| } |
| |
| /// ValidStride - Check whether the given Scale is valid for all loads and |
| /// stores in UsersToProcess. |
| /// |
| bool LoopStrengthReduce::ValidStride(bool HasBaseReg, |
| int64_t Scale, |
| const std::vector<BasedUser>& UsersToProcess) { |
| if (!TLI) |
| return true; |
| |
| for (unsigned i=0, e = UsersToProcess.size(); i!=e; ++i) { |
| // If this is a load or other access, pass the type of the access in. |
| const Type *AccessTy = Type::VoidTy; |
| if (StoreInst *SI = dyn_cast<StoreInst>(UsersToProcess[i].Inst)) |
| AccessTy = SI->getOperand(0)->getType(); |
| else if (LoadInst *LI = dyn_cast<LoadInst>(UsersToProcess[i].Inst)) |
| AccessTy = LI->getType(); |
| else if (isa<PHINode>(UsersToProcess[i].Inst)) |
| continue; |
| |
| TargetLowering::AddrMode AM; |
| if (SCEVConstant *SC = dyn_cast<SCEVConstant>(UsersToProcess[i].Imm)) |
| AM.BaseOffs = SC->getValue()->getSExtValue(); |
| AM.HasBaseReg = HasBaseReg || !UsersToProcess[i].Base->isZero(); |
| AM.Scale = Scale; |
| |
| // If load[imm+r*scale] is illegal, bail out. |
| if (!TLI->isLegalAddressingMode(AM, AccessTy)) |
| return false; |
| } |
| return true; |
| } |
| |
| /// RequiresTypeConversion - Returns true if converting Ty to NewTy is not |
| /// a nop. |
| bool LoopStrengthReduce::RequiresTypeConversion(const Type *Ty1, |
| const Type *Ty2) { |
| if (Ty1 == Ty2) |
| return false; |
| if (TLI && TLI->isTruncateFree(Ty1, Ty2)) |
| return false; |
| return (!Ty1->canLosslesslyBitCastTo(Ty2) && |
| !(isa<PointerType>(Ty2) && |
| Ty1->canLosslesslyBitCastTo(UIntPtrTy)) && |
| !(isa<PointerType>(Ty1) && |
| Ty2->canLosslesslyBitCastTo(UIntPtrTy))); |
| } |
| |
| /// CheckForIVReuse - Returns the multiple if the stride is the multiple |
| /// of a previous stride and it is a legal value for the target addressing |
| /// mode scale component and optional base reg. This allows the users of |
| /// this stride to be rewritten as prev iv * factor. It returns 0 if no |
| /// reuse is possible. Factors can be negative on same targets, e.g. ARM. |
| int64_t LoopStrengthReduce::CheckForIVReuse(bool HasBaseReg, |
| bool AllUsesAreAddresses, |
| bool AllUsesAreOutsideLoop, |
| const SCEVHandle &Stride, |
| IVExpr &IV, const Type *Ty, |
| const std::vector<BasedUser>& UsersToProcess) { |
| if (SCEVConstant *SC = dyn_cast<SCEVConstant>(Stride)) { |
| int64_t SInt = SC->getValue()->getSExtValue(); |
| for (unsigned NewStride = 0, e = StrideOrder.size(); NewStride != e; |
| ++NewStride) { |
| std::map<SCEVHandle, IVsOfOneStride>::iterator SI = |
| IVsByStride.find(StrideOrder[NewStride]); |
| if (SI == IVsByStride.end()) |
| continue; |
| int64_t SSInt = cast<SCEVConstant>(SI->first)->getValue()->getSExtValue(); |
| if (SI->first != Stride && |
| (unsigned(abs(SInt)) < SSInt || (SInt % SSInt) != 0)) |
| continue; |
| int64_t Scale = SInt / SSInt; |
| // Check that this stride is valid for all the types used for loads and |
| // stores; if it can be used for some and not others, we might as well use |
| // the original stride everywhere, since we have to create the IV for it |
| // anyway. If the scale is 1, then we don't need to worry about folding |
| // multiplications. |
| if (Scale == 1 || |
| (AllUsesAreAddresses && |
| ValidStride(HasBaseReg, Scale, UsersToProcess))) |
| for (std::vector<IVExpr>::iterator II = SI->second.IVs.begin(), |
| IE = SI->second.IVs.end(); II != IE; ++II) |
| // FIXME: Only handle base == 0 for now. |
| // Only reuse previous IV if it would not require a type conversion. |
| if (II->Base->isZero() && |
| !RequiresTypeConversion(II->Base->getType(), Ty)) { |
| IV = *II; |
| return Scale; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /// PartitionByIsUseOfPostIncrementedValue - Simple boolean predicate that |
| /// returns true if Val's isUseOfPostIncrementedValue is true. |
| static bool PartitionByIsUseOfPostIncrementedValue(const BasedUser &Val) { |
| return Val.isUseOfPostIncrementedValue; |
| } |
| |
| /// isNonConstantNegative - Return true if the specified scev is negated, but |
| /// not a constant. |
| static bool isNonConstantNegative(const SCEVHandle &Expr) { |
| SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(Expr); |
| if (!Mul) return false; |
| |
| // If there is a constant factor, it will be first. |
| SCEVConstant *SC = dyn_cast<SCEVConstant>(Mul->getOperand(0)); |
| if (!SC) return false; |
| |
| // Return true if the value is negative, this matches things like (-42 * V). |
| return SC->getValue()->getValue().isNegative(); |
| } |
| |
| // CollectIVUsers - Transform our list of users and offsets to a bit more |
| // complex table. In this new vector, each 'BasedUser' contains 'Base', the base |
| // of the strided accesses, as well as the old information from Uses. We |
| // progressively move information from the Base field to the Imm field, until |
| // we eventually have the full access expression to rewrite the use. |
| SCEVHandle LoopStrengthReduce::CollectIVUsers(const SCEVHandle &Stride, |
| IVUsersOfOneStride &Uses, |
| Loop *L, |
| bool &AllUsesAreAddresses, |
| bool &AllUsesAreOutsideLoop, |
| std::vector<BasedUser> &UsersToProcess) { |
| UsersToProcess.reserve(Uses.Users.size()); |
| for (unsigned i = 0, e = Uses.Users.size(); i != e; ++i) { |
| UsersToProcess.push_back(BasedUser(Uses.Users[i], SE)); |
| |
| // Move any loop variant operands from the offset field to the immediate |
| // field of the use, so that we don't try to use something before it is |
| // computed. |
| MoveLoopVariantsToImmediateField(UsersToProcess.back().Base, |
| UsersToProcess.back().Imm, L, SE); |
| assert(UsersToProcess.back().Base->isLoopInvariant(L) && |
| "Base value is not loop invariant!"); |
| } |
| |
| // We now have a whole bunch of uses of like-strided induction variables, but |
| // they might all have different bases. We want to emit one PHI node for this |
| // stride which we fold as many common expressions (between the IVs) into as |
| // possible. Start by identifying the common expressions in the base values |
| // for the strides (e.g. if we have "A+C+B" and "A+B+D" as our bases, find |
| // "A+B"), emit it to the preheader, then remove the expression from the |
| // UsersToProcess base values. |
| SCEVHandle CommonExprs = |
| RemoveCommonExpressionsFromUseBases(UsersToProcess, SE, L, TLI); |
| |
| // Next, figure out what we can represent in the immediate fields of |
| // instructions. If we can represent anything there, move it to the imm |
| // fields of the BasedUsers. We do this so that it increases the commonality |
| // of the remaining uses. |
| unsigned NumPHI = 0; |
| for (unsigned i = 0, e = UsersToProcess.size(); i != e; ++i) { |
| // If the user is not in the current loop, this means it is using the exit |
| // value of the IV. Do not put anything in the base, make sure it's all in |
| // the immediate field to allow as much factoring as possible. |
| if (!L->contains(UsersToProcess[i].Inst->getParent())) { |
| UsersToProcess[i].Imm = SE->getAddExpr(UsersToProcess[i].Imm, |
| UsersToProcess[i].Base); |
| UsersToProcess[i].Base = |
| SE->getIntegerSCEV(0, UsersToProcess[i].Base->getType()); |
| } else { |
| |
| // Addressing modes can be folded into loads and stores. Be careful that |
| // the store is through the expression, not of the expression though. |
| bool isPHI = false; |
| bool isAddress = isAddressUse(UsersToProcess[i].Inst, |
| UsersToProcess[i].OperandValToReplace); |
| if (isa<PHINode>(UsersToProcess[i].Inst)) { |
| isPHI = true; |
| ++NumPHI; |
| } |
| |
| // Not all uses are outside the loop. |
| AllUsesAreOutsideLoop = false; |
| |
| // If this use isn't an address, then not all uses are addresses. |
| if (!isAddress && !isPHI) |
| AllUsesAreAddresses = false; |
| |
| MoveImmediateValues(TLI, UsersToProcess[i].Inst, UsersToProcess[i].Base, |
| UsersToProcess[i].Imm, isAddress, L, SE); |
| } |
| } |
| |
| // If one of the use if a PHI node and all other uses are addresses, still |
| // allow iv reuse. Essentially we are trading one constant multiplication |
| // for one fewer iv. |
| if (NumPHI > 1) |
| AllUsesAreAddresses = false; |
| |
| return CommonExprs; |
| } |
| |
| /// StrengthReduceStridedIVUsers - Strength reduce all of the users of a single |
| /// stride of IV. All of the users may have different starting values, and this |
| /// may not be the only stride (we know it is if isOnlyStride is true). |
| void LoopStrengthReduce::StrengthReduceStridedIVUsers(const SCEVHandle &Stride, |
| IVUsersOfOneStride &Uses, |
| Loop *L, |
| bool isOnlyStride) { |
| // If all the users are moved to another stride, then there is nothing to do. |
| if (Uses.Users.empty()) |
| return; |
| |
| // Keep track if every use in UsersToProcess is an address. If they all are, |
| // we may be able to rewrite the entire collection of them in terms of a |
| // smaller-stride IV. |
| bool AllUsesAreAddresses = true; |
| |
| // Keep track if every use of a single stride is outside the loop. If so, |
| // we want to be more aggressive about reusing a smaller-stride IV; a |
| // multiply outside the loop is better than another IV inside. Well, usually. |
| bool AllUsesAreOutsideLoop = true; |
| |
| // Transform our list of users and offsets to a bit more complex table. In |
| // this new vector, each 'BasedUser' contains 'Base' the base of the |
| // strided accessas well as the old information from Uses. We progressively |
| // move information from the Base field to the Imm field, until we eventually |
| // have the full access expression to rewrite the use. |
| std::vector<BasedUser> UsersToProcess; |
| SCEVHandle CommonExprs = CollectIVUsers(Stride, Uses, L, AllUsesAreAddresses, |
| AllUsesAreOutsideLoop, |
| UsersToProcess); |
| |
| // If we managed to find some expressions in common, we'll need to carry |
| // their value in a register and add it in for each use. This will take up |
| // a register operand, which potentially restricts what stride values are |
| // valid. |
| bool HaveCommonExprs = !CommonExprs->isZero(); |
| |
| // If all uses are addresses, check if it is possible to reuse an IV with a |
| // stride that is a factor of this stride. And that the multiple is a number |
| // that can be encoded in the scale field of the target addressing mode. And |
| // that we will have a valid instruction after this substition, including the |
| // immediate field, if any. |
| PHINode *NewPHI = NULL; |
| Value *IncV = NULL; |
| IVExpr ReuseIV(SE->getIntegerSCEV(0, Type::Int32Ty), |
| SE->getIntegerSCEV(0, Type::Int32Ty), |
| 0, 0); |
| int64_t RewriteFactor = 0; |
| RewriteFactor = CheckForIVReuse(HaveCommonExprs, AllUsesAreAddresses, |
| AllUsesAreOutsideLoop, |
| Stride, ReuseIV, CommonExprs->getType(), |
| UsersToProcess); |
| if (RewriteFactor != 0) { |
| DOUT << "BASED ON IV of STRIDE " << *ReuseIV.Stride |
| << " and BASE " << *ReuseIV.Base << " :\n"; |
| NewPHI = ReuseIV.PHI; |
| IncV = ReuseIV.IncV; |
| } |
| |
| const Type *ReplacedTy = CommonExprs->getType(); |
| |
| // Now that we know what we need to do, insert the PHI node itself. |
| // |
| DOUT << "INSERTING IV of TYPE " << *ReplacedTy << " of STRIDE " |
| << *Stride << " and BASE " << *CommonExprs << ": "; |
| |
| SCEVExpander Rewriter(*SE, *LI); |
| SCEVExpander PreheaderRewriter(*SE, *LI); |
| |
| BasicBlock *Preheader = L->getLoopPreheader(); |
| Instruction *PreInsertPt = Preheader->getTerminator(); |
| Instruction *PhiInsertBefore = L->getHeader()->begin(); |
| |
| BasicBlock *LatchBlock = L->getLoopLatch(); |
| |
| |
| // Emit the initial base value into the loop preheader. |
| Value *CommonBaseV |
| = PreheaderRewriter.expandCodeFor(CommonExprs, PreInsertPt); |
| |
| if (RewriteFactor == 0) { |
| // Create a new Phi for this base, and stick it in the loop header. |
| NewPHI = PHINode::Create(ReplacedTy, "iv.", PhiInsertBefore); |
| ++NumInserted; |
| |
| // Add common base to the new Phi node. |
| NewPHI->addIncoming(CommonBaseV, Preheader); |
| |
| // If the stride is negative, insert a sub instead of an add for the |
| // increment. |
| bool isNegative = isNonConstantNegative(Stride); |
| SCEVHandle IncAmount = Stride; |
| if (isNegative) |
| IncAmount = SE->getNegativeSCEV(Stride); |
| |
| // Insert the stride into the preheader. |
| Value *StrideV = PreheaderRewriter.expandCodeFor(IncAmount, PreInsertPt); |
| if (!isa<ConstantInt>(StrideV)) ++NumVariable; |
| |
| // Emit the increment of the base value before the terminator of the loop |
| // latch block, and add it to the Phi node. |
| SCEVHandle IncExp = SE->getUnknown(StrideV); |
| if (isNegative) |
| IncExp = SE->getNegativeSCEV(IncExp); |
| IncExp = SE->getAddExpr(SE->getUnknown(NewPHI), IncExp); |
| |
| IncV = Rewriter.expandCodeFor(IncExp, LatchBlock->getTerminator()); |
| IncV->setName(NewPHI->getName()+".inc"); |
| NewPHI->addIncoming(IncV, LatchBlock); |
| |
| // Remember this in case a later stride is multiple of this. |
| IVsByStride[Stride].addIV(Stride, CommonExprs, NewPHI, IncV); |
| |
| DOUT << " IV=%" << NewPHI->getNameStr() << " INC=%" << IncV->getNameStr(); |
| } else { |
| Constant *C = dyn_cast<Constant>(CommonBaseV); |
| if (!C || |
| (!C->isNullValue() && |
| !fitsInAddressMode(SE->getUnknown(CommonBaseV), ReplacedTy, |
| TLI, false))) |
| // We want the common base emitted into the preheader! This is just |
| // using cast as a copy so BitCast (no-op cast) is appropriate |
| CommonBaseV = new BitCastInst(CommonBaseV, CommonBaseV->getType(), |
| "commonbase", PreInsertPt); |
| } |
| DOUT << "\n"; |
| |
| // We want to emit code for users inside the loop first. To do this, we |
| // rearrange BasedUser so that the entries at the end have |
| // isUseOfPostIncrementedValue = false, because we pop off the end of the |
| // vector (so we handle them first). |
| std::partition(UsersToProcess.begin(), UsersToProcess.end(), |
| PartitionByIsUseOfPostIncrementedValue); |
| |
| // Sort this by base, so that things with the same base are handled |
| // together. By partitioning first and stable-sorting later, we are |
| // guaranteed that within each base we will pop off users from within the |
| // loop before users outside of the loop with a particular base. |
| // |
| // We would like to use stable_sort here, but we can't. The problem is that |
| // SCEVHandle's don't have a deterministic ordering w.r.t to each other, so |
| // we don't have anything to do a '<' comparison on. Because we think the |
| // number of uses is small, do a horrible bubble sort which just relies on |
| // ==. |
| for (unsigned i = 0, e = UsersToProcess.size(); i != e; ++i) { |
| // Get a base value. |
| SCEVHandle Base = UsersToProcess[i].Base; |
| |
| // Compact everything with this base to be consecutive with this one. |
| for (unsigned j = i+1; j != e; ++j) { |
| if (UsersToProcess[j].Base == Base) { |
| std::swap(UsersToProcess[i+1], UsersToProcess[j]); |
| ++i; |
| } |
| } |
| } |
| |
| // Process all the users now. This outer loop handles all bases, the inner |
| // loop handles all users of a particular base. |
| while (!UsersToProcess.empty()) { |
| SCEVHandle Base = UsersToProcess.back().Base; |
| |
| // Emit the code for Base into the preheader. |
| Value *BaseV = PreheaderRewriter.expandCodeFor(Base, PreInsertPt); |
| |
| DOUT << " INSERTING code for BASE = " << *Base << ":"; |
| if (BaseV->hasName()) |
| DOUT << " Result value name = %" << BaseV->getNameStr(); |
| DOUT << "\n"; |
| |
| // If BaseV is a constant other than 0, make sure that it gets inserted into |
| // the preheader, instead of being forward substituted into the uses. We do |
| // this by forcing a BitCast (noop cast) to be inserted into the preheader |
| // in this case. |
| if (Constant *C = dyn_cast<Constant>(BaseV)) { |
| if (!C->isNullValue() && !fitsInAddressMode(Base, ReplacedTy, |
| TLI, false)) { |
| // We want this constant emitted into the preheader! This is just |
| // using cast as a copy so BitCast (no-op cast) is appropriate |
| BaseV = new BitCastInst(BaseV, BaseV->getType(), "preheaderinsert", |
| PreInsertPt); |
| } |
| } |
| |
| // Emit the code to add the immediate offset to the Phi value, just before |
| // the instructions that we identified as using this stride and base. |
| do { |
| // FIXME: Use emitted users to emit other users. |
| BasedUser &User = UsersToProcess.back(); |
| |
| // If this instruction wants to use the post-incremented value, move it |
| // after the post-inc and use its value instead of the PHI. |
| Value *RewriteOp = NewPHI; |
| if (User.isUseOfPostIncrementedValue) { |
| RewriteOp = IncV; |
| |
| // If this user is in the loop, make sure it is the last thing in the |
| // loop to ensure it is dominated by the increment. |
| if (L->contains(User.Inst->getParent())) |
| User.Inst->moveBefore(LatchBlock->getTerminator()); |
| } |
| if (RewriteOp->getType() != ReplacedTy) { |
| Instruction::CastOps opcode = Instruction::Trunc; |
| if (ReplacedTy->getPrimitiveSizeInBits() == |
| RewriteOp->getType()->getPrimitiveSizeInBits()) |
| opcode = Instruction::BitCast; |
| RewriteOp = SCEVExpander::InsertCastOfTo(opcode, RewriteOp, ReplacedTy); |
| } |
| |
| SCEVHandle RewriteExpr = SE->getUnknown(RewriteOp); |
| |
| // If we had to insert new instructions for RewriteOp, we have to |
| // consider that they may not have been able to end up immediately |
| // next to RewriteOp, because non-PHI instructions may never precede |
| // PHI instructions in a block. In this case, remember where the last |
| // instruction was inserted so that if we're replacing a different |
| // PHI node, we can use the later point to expand the final |
| // RewriteExpr. |
| Instruction *NewBasePt = dyn_cast<Instruction>(RewriteOp); |
| if (RewriteOp == NewPHI) NewBasePt = 0; |
| |
| // Clear the SCEVExpander's expression map so that we are guaranteed |
| // to have the code emitted where we expect it. |
| Rewriter.clear(); |
| |
| // If we are reusing the iv, then it must be multiplied by a constant |
| // factor take advantage of addressing mode scale component. |
| if (RewriteFactor != 0) { |
| RewriteExpr = SE->getMulExpr(SE->getIntegerSCEV(RewriteFactor, |
| RewriteExpr->getType()), |
| RewriteExpr); |
| |
| // The common base is emitted in the loop preheader. But since we |
| // are reusing an IV, it has not been used to initialize the PHI node. |
| // Add it to the expression used to rewrite the uses. |
| if (!isa<ConstantInt>(CommonBaseV) || |
| !cast<ConstantInt>(CommonBaseV)->isZero()) |
| RewriteExpr = SE->getAddExpr(RewriteExpr, |
| SE->getUnknown(CommonBaseV)); |
| } |
| |
| // Now that we know what we need to do, insert code before User for the |
| // immediate and any loop-variant expressions. |
| if (!isa<ConstantInt>(BaseV) || !cast<ConstantInt>(BaseV)->isZero()) |
| // Add BaseV to the PHI value if needed. |
| RewriteExpr = SE->getAddExpr(RewriteExpr, SE->getUnknown(BaseV)); |
| |
| User.RewriteInstructionToUseNewBase(RewriteExpr, NewBasePt, |
| Rewriter, L, this, |
| DeadInsts); |
| |
| // Mark old value we replaced as possibly dead, so that it is eliminated |
| // if we just replaced the last use of that value. |
| DeadInsts.push_back(cast<Instruction>(User.OperandValToReplace)); |
| |
| UsersToProcess.pop_back(); |
| ++NumReduced; |
| |
| // If there are any more users to process with the same base, process them |
| // now. We sorted by base above, so we just have to check the last elt. |
| } while (!UsersToProcess.empty() && UsersToProcess.back().Base == Base); |
| // TODO: Next, find out which base index is the most common, pull it out. |
| } |
| |
| // IMPORTANT TODO: Figure out how to partition the IV's with this stride, but |
| // different starting values, into different PHIs. |
| } |
| |
| /// FindIVUserForCond - If Cond has an operand that is an expression of an IV, |
| /// set the IV user and stride information and return true, otherwise return |
| /// false. |
| bool LoopStrengthReduce::FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse, |
| const SCEVHandle *&CondStride) { |
| for (unsigned Stride = 0, e = StrideOrder.size(); Stride != e && !CondUse; |
| ++Stride) { |
| std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI = |
| IVUsesByStride.find(StrideOrder[Stride]); |
| assert(SI != IVUsesByStride.end() && "Stride doesn't exist!"); |
| |
| for (std::vector<IVStrideUse>::iterator UI = SI->second.Users.begin(), |
| E = SI->second.Users.end(); UI != E; ++UI) |
| if (UI->User == Cond) { |
| // NOTE: we could handle setcc instructions with multiple uses here, but |
| // InstCombine does it as well for simple uses, it's not clear that it |
| // occurs enough in real life to handle. |
| CondUse = &*UI; |
| CondStride = &SI->first; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| namespace { |
| // Constant strides come first which in turns are sorted by their absolute |
| // values. If absolute values are the same, then positive strides comes first. |
| // e.g. |
| // 4, -1, X, 1, 2 ==> 1, -1, 2, 4, X |
| struct StrideCompare { |
| bool operator()(const SCEVHandle &LHS, const SCEVHandle &RHS) { |
| SCEVConstant *LHSC = dyn_cast<SCEVConstant>(LHS); |
| SCEVConstant *RHSC = dyn_cast<SCEVConstant>(RHS); |
| if (LHSC && RHSC) { |
| int64_t LV = LHSC->getValue()->getSExtValue(); |
| int64_t RV = RHSC->getValue()->getSExtValue(); |
| uint64_t ALV = (LV < 0) ? -LV : LV; |
| uint64_t ARV = (RV < 0) ? -RV : RV; |
| if (ALV == ARV) |
| return LV > RV; |
| else |
| return ALV < ARV; |
| } |
| return (LHSC && !RHSC); |
| } |
| }; |
| } |
| |
| /// ChangeCompareStride - If a loop termination compare instruction is the |
| /// only use of its stride, and the compaison is against a constant value, |
| /// try eliminate the stride by moving the compare instruction to another |
| /// stride and change its constant operand accordingly. e.g. |
| /// |
| /// loop: |
| /// ... |
| /// v1 = v1 + 3 |
| /// v2 = v2 + 1 |
| /// if (v2 < 10) goto loop |
| /// => |
| /// loop: |
| /// ... |
| /// v1 = v1 + 3 |
| /// if (v1 < 30) goto loop |
| ICmpInst *LoopStrengthReduce::ChangeCompareStride(Loop *L, ICmpInst *Cond, |
| IVStrideUse* &CondUse, |
| const SCEVHandle* &CondStride) { |
| if (StrideOrder.size() < 2 || |
| IVUsesByStride[*CondStride].Users.size() != 1) |
| return Cond; |
| const SCEVConstant *SC = dyn_cast<SCEVConstant>(*CondStride); |
| if (!SC) return Cond; |
| ConstantInt *C = dyn_cast<ConstantInt>(Cond->getOperand(1)); |
| if (!C) return Cond; |
| |
| ICmpInst::Predicate Predicate = Cond->getPredicate(); |
| int64_t CmpSSInt = SC->getValue()->getSExtValue(); |
| int64_t CmpVal = C->getValue().getSExtValue(); |
| unsigned BitWidth = C->getValue().getBitWidth(); |
| uint64_t SignBit = 1ULL << (BitWidth-1); |
| const Type *CmpTy = C->getType(); |
| const Type *NewCmpTy = NULL; |
| unsigned TyBits = CmpTy->getPrimitiveSizeInBits(); |
| unsigned NewTyBits = 0; |
| int64_t NewCmpVal = CmpVal; |
| SCEVHandle *NewStride = NULL; |
| Value *NewIncV = NULL; |
| int64_t Scale = 1; |
| |
| // Check stride constant and the comparision constant signs to detect |
| // overflow. |
| if ((CmpVal & SignBit) != (CmpSSInt & SignBit)) |
| return Cond; |
| |
| // Look for a suitable stride / iv as replacement. |
| std::stable_sort(StrideOrder.begin(), StrideOrder.end(), StrideCompare()); |
| for (unsigned i = 0, e = StrideOrder.size(); i != e; ++i) { |
| std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI = |
| IVUsesByStride.find(StrideOrder[i]); |
| if (!isa<SCEVConstant>(SI->first)) |
| continue; |
| int64_t SSInt = cast<SCEVConstant>(SI->first)->getValue()->getSExtValue(); |
| if (abs(SSInt) <= abs(CmpSSInt) || (SSInt % CmpSSInt) != 0) |
| continue; |
| |
| Scale = SSInt / CmpSSInt; |
| NewCmpVal = CmpVal * Scale; |
| APInt Mul = APInt(BitWidth, NewCmpVal); |
| // Check for overflow. |
| if (Mul.getSExtValue() != NewCmpVal) { |
| NewCmpVal = CmpVal; |
| continue; |
| } |
| |
| // Watch out for overflow. |
| if (ICmpInst::isSignedPredicate(Predicate) && |
| (CmpVal & SignBit) != (NewCmpVal & SignBit)) |
| NewCmpVal = CmpVal; |
| |
| if (NewCmpVal != CmpVal) { |
| // Pick the best iv to use trying to avoid a cast. |
| NewIncV = NULL; |
| for (std::vector<IVStrideUse>::iterator UI = SI->second.Users.begin(), |
| E = SI->second.Users.end(); UI != E; ++UI) { |
| NewIncV = UI->OperandValToReplace; |
| if (NewIncV->getType() == CmpTy) |
| break; |
| } |
| if (!NewIncV) { |
| NewCmpVal = CmpVal; |
| continue; |
| } |
| |
| NewCmpTy = NewIncV->getType(); |
| NewTyBits = isa<PointerType>(NewCmpTy) |
| ? UIntPtrTy->getPrimitiveSizeInBits() |
| : NewCmpTy->getPrimitiveSizeInBits(); |
| if (RequiresTypeConversion(NewCmpTy, CmpTy)) { |
| // Check if it is possible to rewrite it using |
| // an iv / stride of a smaller integer type. |
| bool TruncOk = false; |
| if (NewCmpTy->isInteger()) { |
| unsigned Bits = NewTyBits; |
| if (ICmpInst::isSignedPredicate(Predicate)) |
| --Bits; |
| uint64_t Mask = (1ULL << Bits) - 1; |
| if (((uint64_t)NewCmpVal & Mask) == (uint64_t)NewCmpVal) |
| TruncOk = true; |
| } |
| if (!TruncOk) { |
| NewCmpVal = CmpVal; |
| continue; |
| } |
| } |
| |
| // Don't rewrite if use offset is non-constant and the new type is |
| // of a different type. |
| // FIXME: too conservative? |
| if (NewTyBits != TyBits && !isa<SCEVConstant>(CondUse->Offset)) { |
| NewCmpVal = CmpVal; |
| continue; |
| } |
| |
| bool AllUsesAreAddresses = true; |
| bool AllUsesAreOutsideLoop = true; |
| std::vector<BasedUser> UsersToProcess; |
| SCEVHandle CommonExprs = CollectIVUsers(SI->first, SI->second, L, |
| AllUsesAreAddresses, |
| AllUsesAreOutsideLoop, |
| UsersToProcess); |
| // Avoid rewriting the compare instruction with an iv of new stride |
| // if it's likely the new stride uses will be rewritten using the |
| if (AllUsesAreAddresses && |
| ValidStride(!CommonExprs->isZero(), Scale, UsersToProcess)) { |
| NewCmpVal = CmpVal; |
| continue; |
| } |
| |
| // If scale is negative, use swapped predicate unless it's testing |
| // for equality. |
| if (Scale < 0 && !Cond->isEquality()) |
| Predicate = ICmpInst::getSwappedPredicate(Predicate); |
| |
| NewStride = &StrideOrder[i]; |
| break; |
| } |
| } |
| |
| // Forgo this transformation if it the increment happens to be |
| // unfortunately positioned after the condition, and the condition |
| // has multiple uses which prevent it from being moved immediately |
| // before the branch. See |
| // test/Transforms/LoopStrengthReduce/change-compare-stride-trickiness-*.ll |
| // for an example of this situation. |
| if (!Cond->hasOneUse()) { |
| for (BasicBlock::iterator I = Cond, E = Cond->getParent()->end(); |
| I != E; ++I) |
| if (I == NewIncV) |
| return Cond; |
| } |
| |
| if (NewCmpVal != CmpVal) { |
| // Create a new compare instruction using new stride / iv. |
| ICmpInst *OldCond = Cond; |
| Value *RHS; |
| if (!isa<PointerType>(NewCmpTy)) |
| RHS = ConstantInt::get(NewCmpTy, NewCmpVal); |
| else { |
| RHS = ConstantInt::get(UIntPtrTy, NewCmpVal); |
| RHS = SCEVExpander::InsertCastOfTo(Instruction::IntToPtr, RHS, NewCmpTy); |
| } |
| // Insert new compare instruction. |
| Cond = new ICmpInst(Predicate, NewIncV, RHS, |
| L->getHeader()->getName() + ".termcond", |
| OldCond); |
| |
| // Remove the old compare instruction. The old indvar is probably dead too. |
| DeadInsts.push_back(cast<Instruction>(CondUse->OperandValToReplace)); |
| SE->deleteValueFromRecords(OldCond); |
| OldCond->replaceAllUsesWith(Cond); |
| OldCond->eraseFromParent(); |
| |
| IVUsesByStride[*CondStride].Users.pop_back(); |
| SCEVHandle NewOffset = TyBits == NewTyBits |
| ? SE->getMulExpr(CondUse->Offset, |
| SE->getConstant(ConstantInt::get(CmpTy, Scale))) |
| : SE->getConstant(ConstantInt::get(NewCmpTy, |
| cast<SCEVConstant>(CondUse->Offset)->getValue()->getSExtValue()*Scale)); |
| IVUsesByStride[*NewStride].addUser(NewOffset, Cond, NewIncV); |
| CondUse = &IVUsesByStride[*NewStride].Users.back(); |
| CondStride = NewStride; |
| ++NumEliminated; |
| } |
| |
| return Cond; |
| } |
| |
| /// OptimizeSMax - Rewrite the loop's terminating condition if it uses |
| /// an smax computation. |
| /// |
| /// This is a narrow solution to a specific, but acute, problem. For loops |
| /// like this: |
| /// |
| /// i = 0; |
| /// do { |
| /// p[i] = 0.0; |
| /// } while (++i < n); |
| /// |
| /// where the comparison is signed, the trip count isn't just 'n', because |
| /// 'n' could be negative. And unfortunately this can come up even for loops |
| /// where the user didn't use a C do-while loop. For example, seemingly |
| /// well-behaved top-test loops will commonly be lowered like this: |
| // |
| /// if (n > 0) { |
| /// i = 0; |
| /// do { |
| /// p[i] = 0.0; |
| /// } while (++i < n); |
| /// } |
| /// |
| /// and then it's possible for subsequent optimization to obscure the if |
| /// test in such a way that indvars can't find it. |
| /// |
| /// When indvars can't find the if test in loops like this, it creates a |
| /// signed-max expression, which allows it to give the loop a canonical |
| /// induction variable: |
| /// |
| /// i = 0; |
| /// smax = n < 1 ? 1 : n; |
| /// do { |
| /// p[i] = 0.0; |
| /// } while (++i != smax); |
| /// |
| /// Canonical induction variables are necessary because the loop passes |
| /// are designed around them. The most obvious example of this is the |
| /// LoopInfo analysis, which doesn't remember trip count values. It |
| /// expects to be able to rediscover the trip count each time it is |
| /// needed, and it does this using a simple analyis that only succeeds if |
| /// the loop has a canonical induction variable. |
| /// |
| /// However, when it comes time to generate code, the maximum operation |
| /// can be quite costly, especially if it's inside of an outer loop. |
| /// |
| /// This function solves this problem by detecting this type of loop and |
| /// rewriting their conditions from ICMP_NE back to ICMP_SLT, and deleting |
| /// the instructions for the maximum computation. |
| /// |
| ICmpInst *LoopStrengthReduce::OptimizeSMax(Loop *L, ICmpInst *Cond, |
| IVStrideUse* &CondUse) { |
| // Check that the loop matches the pattern we're looking for. |
| if (Cond->getPredicate() != CmpInst::ICMP_EQ && |
| Cond->getPredicate() != CmpInst::ICMP_NE) |
| return Cond; |
| |
| SelectInst *Sel = dyn_cast<SelectInst>(Cond->getOperand(1)); |
| if (!Sel || !Sel->hasOneUse()) return Cond; |
| |
| SCEVHandle IterationCount = SE->getIterationCount(L); |
| if (isa<SCEVCouldNotCompute>(IterationCount)) |
| return Cond; |
| SCEVHandle One = SE->getIntegerSCEV(1, IterationCount->getType()); |
| |
| // Adjust for an annoying getIterationCount quirk. |
| IterationCount = SE->getAddExpr(IterationCount, One); |
| |
| // Check for a max calculation that matches the pattern. |
| SCEVSMaxExpr *SMax = dyn_cast<SCEVSMaxExpr>(IterationCount); |
| if (!SMax || SMax != SE->getSCEV(Sel)) return Cond; |
| |
| SCEVHandle SMaxLHS = SMax->getOperand(0); |
| SCEVHandle SMaxRHS = SMax->getOperand(1); |
| if (!SMaxLHS || SMaxLHS != One) return Cond; |
| |
| // Check the relevant induction variable for conformance to |
| // the pattern. |
| SCEVHandle IV = SE->getSCEV(Cond->getOperand(0)); |
| SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(IV); |
| if (!AR || !AR->isAffine() || |
| AR->getStart() != One || |
| AR->getStepRecurrence(*SE) != One) |
| return Cond; |
| |
| // Check the right operand of the select, and remember it, as it will |
| // be used in the new comparison instruction. |
| Value *NewRHS = 0; |
| if (SE->getSCEV(Sel->getOperand(1)) == SMaxRHS) |
| NewRHS = Sel->getOperand(1); |
| else if (SE->getSCEV(Sel->getOperand(2)) == SMaxRHS) |
| NewRHS = Sel->getOperand(2); |
| if (!NewRHS) return Cond; |
| |
| // Ok, everything looks ok to change the condition into an SLT or SGE and |
| // delete the max calculation. |
| ICmpInst *NewCond = |
| new ICmpInst(Cond->getPredicate() == CmpInst::ICMP_NE ? |
| CmpInst::ICMP_SLT : |
| CmpInst::ICMP_SGE, |
| Cond->getOperand(0), NewRHS, "scmp", Cond); |
| |
| // Delete the max calculation instructions. |
| SE->deleteValueFromRecords(Cond); |
| Cond->replaceAllUsesWith(NewCond); |
| Cond->eraseFromParent(); |
| Instruction *Cmp = cast<Instruction>(Sel->getOperand(0)); |
| SE->deleteValueFromRecords(Sel); |
| Sel->eraseFromParent(); |
| if (Cmp->use_empty()) { |
| SE->deleteValueFromRecords(Cmp); |
| Cmp->eraseFromParent(); |
| } |
| CondUse->User = NewCond; |
| return NewCond; |
| } |
| |
| /// OptimizeShadowIV - If IV is used in a int-to-float cast |
| /// inside the loop then try to eliminate the cast opeation. |
| void LoopStrengthReduce::OptimizeShadowIV(Loop *L) { |
| |
| SCEVHandle IterationCount = SE->getIterationCount(L); |
| if (isa<SCEVCouldNotCompute>(IterationCount)) |
| return; |
| |
| for (unsigned Stride = 0, e = StrideOrder.size(); Stride != e; |
| ++Stride) { |
| std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI = |
| IVUsesByStride.find(StrideOrder[Stride]); |
| assert(SI != IVUsesByStride.end() && "Stride doesn't exist!"); |
| if (!isa<SCEVConstant>(SI->first)) |
| continue; |
| |
| for (std::vector<IVStrideUse>::iterator UI = SI->second.Users.begin(), |
| E = SI->second.Users.end(); UI != E; /* empty */) { |
| std::vector<IVStrideUse>::iterator CandidateUI = UI; |
| ++UI; |
| Instruction *ShadowUse = CandidateUI->User; |
| const Type *DestTy = NULL; |
| |
| /* If shadow use is a int->float cast then insert a second IV |
| to eliminate this cast. |
| |
| for (unsigned i = 0; i < n; ++i) |
| foo((double)i); |
| |
| is transformed into |
| |
| double d = 0.0; |
| for (unsigned i = 0; i < n; ++i, ++d) |
| foo(d); |
| */ |
| if (UIToFPInst *UCast = dyn_cast<UIToFPInst>(CandidateUI->User)) |
| DestTy = UCast->getDestTy(); |
| else if (SIToFPInst *SCast = dyn_cast<SIToFPInst>(CandidateUI->User)) |
| DestTy = SCast->getDestTy(); |
| if (!DestTy) continue; |
| |
| if (TLI) { |
| /* If target does not support DestTy natively then do not apply |
| this transformation. */ |
| MVT DVT = TLI->getValueType(DestTy); |
| if (!TLI->isTypeLegal(DVT)) continue; |
| } |
| |
| PHINode *PH = dyn_cast<PHINode>(ShadowUse->getOperand(0)); |
| if (!PH) continue; |
| if (PH->getNumIncomingValues() != 2) continue; |
| |
| const Type *SrcTy = PH->getType(); |
| int Mantissa = DestTy->getFPMantissaWidth(); |
| if (Mantissa == -1) continue; |
| if ((int)TD->getTypeSizeInBits(SrcTy) > Mantissa) |
| continue; |
| |
| unsigned Entry, Latch; |
| if (PH->getIncomingBlock(0) == L->getLoopPreheader()) { |
| Entry = 0; |
| Latch = 1; |
| } else { |
| Entry = 1; |
| Latch = 0; |
| } |
| |
| ConstantInt *Init = dyn_cast<ConstantInt>(PH->getIncomingValue(Entry)); |
| if (!Init) continue; |
| ConstantFP *NewInit = ConstantFP::get(DestTy, Init->getZExtValue()); |
| |
| BinaryOperator *Incr = |
| dyn_cast<BinaryOperator>(PH->getIncomingValue(Latch)); |
| if (!Incr) continue; |
| if (Incr->getOpcode() != Instruction::Add |
| && Incr->getOpcode() != Instruction::Sub) |
| continue; |
| |
| /* Initialize new IV, double d = 0.0 in above example. */ |
| ConstantInt *C = NULL; |
| if (Incr->getOperand(0) == PH) |
| C = dyn_cast<ConstantInt>(Incr->getOperand(1)); |
| else if (Incr->getOperand(1) == PH) |
| C = dyn_cast<ConstantInt>(Incr->getOperand(0)); |
| else |
| continue; |
| |
| if (!C) continue; |
| |
| /* Add new PHINode. */ |
| PHINode *NewPH = PHINode::Create(DestTy, "IV.S.", PH); |
| |
| /* create new increment. '++d' in above example. */ |
| ConstantFP *CFP = ConstantFP::get(DestTy, C->getZExtValue()); |
| BinaryOperator *NewIncr = |
| BinaryOperator::Create(Incr->getOpcode(), |
| NewPH, CFP, "IV.S.next.", Incr); |
| |
| NewPH->addIncoming(NewInit, PH->getIncomingBlock(Entry)); |
| NewPH->addIncoming(NewIncr, PH->getIncomingBlock(Latch)); |
| |
| /* Remove cast operation */ |
| SE->deleteValueFromRecords(ShadowUse); |
| ShadowUse->replaceAllUsesWith(NewPH); |
| ShadowUse->eraseFromParent(); |
| SI->second.Users.erase(CandidateUI); |
| NumShadow++; |
| break; |
| } |
| } |
| } |
| |
| // OptimizeIndvars - Now that IVUsesByStride is set up with all of the indvar |
| // uses in the loop, look to see if we can eliminate some, in favor of using |
| // common indvars for the different uses. |
| void LoopStrengthReduce::OptimizeIndvars(Loop *L) { |
| // TODO: implement optzns here. |
| |
| OptimizeShadowIV(L); |
| |
| // Finally, get the terminating condition for the loop if possible. If we |
| // can, we want to change it to use a post-incremented version of its |
| // induction variable, to allow coalescing the live ranges for the IV into |
| // one register value. |
| PHINode *SomePHI = cast<PHINode>(L->getHeader()->begin()); |
| BasicBlock *Preheader = L->getLoopPreheader(); |
| BasicBlock *LatchBlock = |
| SomePHI->getIncomingBlock(SomePHI->getIncomingBlock(0) == Preheader); |
| BranchInst *TermBr = dyn_cast<BranchInst>(LatchBlock->getTerminator()); |
| if (!TermBr || TermBr->isUnconditional() || |
| !isa<ICmpInst>(TermBr->getCondition())) |
| return; |
| ICmpInst *Cond = cast<ICmpInst>(TermBr->getCondition()); |
| |
| // Search IVUsesByStride to find Cond's IVUse if there is one. |
| IVStrideUse *CondUse = 0; |
| const SCEVHandle *CondStride = 0; |
| |
| if (!FindIVUserForCond(Cond, CondUse, CondStride)) |
| return; // setcc doesn't use the IV. |
| |
| // If the trip count is computed in terms of an smax (due to ScalarEvolution |
| // being unable to find a sufficient guard, for example), change the loop |
| // comparison to use SLT instead of NE. |
| Cond = OptimizeSMax(L, Cond, CondUse); |
| |
| // If possible, change stride and operands of the compare instruction to |
| // eliminate one stride. |
| Cond = ChangeCompareStride(L, Cond, CondUse, CondStride); |
| |
| // It's possible for the setcc instruction to be anywhere in the loop, and |
| // possible for it to have multiple users. If it is not immediately before |
| // the latch block branch, move it. |
| if (&*++BasicBlock::iterator(Cond) != (Instruction*)TermBr) { |
| if (Cond->hasOneUse()) { // Condition has a single use, just move it. |
| Cond->moveBefore(TermBr); |
| } else { |
| // Otherwise, clone the terminating condition and insert into the loopend. |
| Cond = cast<ICmpInst>(Cond->clone()); |
| Cond->setName(L->getHeader()->getName() + ".termcond"); |
| LatchBlock->getInstList().insert(TermBr, Cond); |
| |
| // Clone the IVUse, as the old use still exists! |
| IVUsesByStride[*CondStride].addUser(CondUse->Offset, Cond, |
| CondUse->OperandValToReplace); |
| CondUse = &IVUsesByStride[*CondStride].Users.back(); |
| } |
| } |
| |
| // If we get to here, we know that we can transform the setcc instruction to |
| // use the post-incremented version of the IV, allowing us to coalesce the |
| // live ranges for the IV correctly. |
| CondUse->Offset = SE->getMinusSCEV(CondUse->Offset, *CondStride); |
| CondUse->isUseOfPostIncrementedValue = true; |
| Changed = true; |
| } |
| |
| bool LoopStrengthReduce::runOnLoop(Loop *L, LPPassManager &LPM) { |
| |
| LI = &getAnalysis<LoopInfo>(); |
| DT = &getAnalysis<DominatorTree>(); |
| SE = &getAnalysis<ScalarEvolution>(); |
| TD = &getAnalysis<TargetData>(); |
| UIntPtrTy = TD->getIntPtrType(); |
| Changed = false; |
| |
| // Find all uses of induction variables in this loop, and categorize |
| // them by stride. Start by finding all of the PHI nodes in the header for |
| // this loop. If they are induction variables, inspect their uses. |
| SmallPtrSet<Instruction*,16> Processed; // Don't reprocess instructions. |
| for (BasicBlock::iterator I = L->getHeader()->begin(); isa<PHINode>(I); ++I) |
| AddUsersIfInteresting(I, L, Processed); |
| |
| if (!IVUsesByStride.empty()) { |
| // Optimize induction variables. Some indvar uses can be transformed to use |
| // strides that will be needed for other purposes. A common example of this |
| // is the exit test for the loop, which can often be rewritten to use the |
| // computation of some other indvar to decide when to terminate the loop. |
| OptimizeIndvars(L); |
| |
| // FIXME: We can widen subreg IV's here for RISC targets. e.g. instead of |
| // doing computation in byte values, promote to 32-bit values if safe. |
| |
| // FIXME: Attempt to reuse values across multiple IV's. In particular, we |
| // could have something like "for(i) { foo(i*8); bar(i*16) }", which should |
| // be codegened as "for (j = 0;; j+=8) { foo(j); bar(j+j); }" on X86/PPC. |
| // Need to be careful that IV's are all the same type. Only works for |
| // intptr_t indvars. |
| |
| // If we only have one stride, we can more aggressively eliminate some |
| // things. |
| bool HasOneStride = IVUsesByStride.size() == 1; |
| |
| #ifndef NDEBUG |
| DOUT << "\nLSR on "; |
| DEBUG(L->dump()); |
| #endif |
| |
| // IVsByStride keeps IVs for one particular loop. |
| assert(IVsByStride.empty() && "Stale entries in IVsByStride?"); |
| |
| // Sort the StrideOrder so we process larger strides first. |
| std::stable_sort(StrideOrder.begin(), StrideOrder.end(), StrideCompare()); |
| |
| // Note: this processes each stride/type pair individually. All users |
| // passed into StrengthReduceStridedIVUsers have the same type AND stride. |
| // Also, note that we iterate over IVUsesByStride indirectly by using |
| // StrideOrder. This extra layer of indirection makes the ordering of |
| // strides deterministic - not dependent on map order. |
| for (unsigned Stride = 0, e = StrideOrder.size(); Stride != e; ++Stride) { |
| std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI = |
| IVUsesByStride.find(StrideOrder[Stride]); |
| assert(SI != IVUsesByStride.end() && "Stride doesn't exist!"); |
| StrengthReduceStridedIVUsers(SI->first, SI->second, L, HasOneStride); |
| } |
| } |
| |
| // We're done analyzing this loop; release all the state we built up for it. |
| CastedPointers.clear(); |
| IVUsesByStride.clear(); |
| IVsByStride.clear(); |
| StrideOrder.clear(); |
| |
| // Clean up after ourselves |
| if (!DeadInsts.empty()) { |
| DeleteTriviallyDeadInstructions(); |
| |
| BasicBlock::iterator I = L->getHeader()->begin(); |
| while (PHINode *PN = dyn_cast<PHINode>(I++)) { |
| // At this point, we know that we have killed one or more IV users. |
| // It is worth checking to see if the cannonical indvar is also |
| // dead, so that we can remove it as well. |
| // |
| // We can remove a PHI if it is on a cycle in the def-use graph |
| // where each node in the cycle has degree one, i.e. only one use, |
| // and is an instruction with no side effects. |
| // |
| // FIXME: this needs to eliminate an induction variable even if it's being |
| // compared against some value to decide loop termination. |
| if (!PN->hasOneUse()) |
| continue; |
| |
| SmallPtrSet<PHINode *, 4> PHIs; |
| for (Instruction *J = dyn_cast<Instruction>(*PN->use_begin()); |
| J && J->hasOneUse() && !J->mayWriteToMemory(); |
| J = dyn_cast<Instruction>(*J->use_begin())) { |
| // If we find the original PHI, we've discovered a cycle. |
| if (J == PN) { |
| // Break the cycle and mark the PHI for deletion. |
| SE->deleteValueFromRecords(PN); |
| PN->replaceAllUsesWith(UndefValue::get(PN->getType())); |
| DeadInsts.push_back(PN); |
| Changed = true; |
| break; |
| } |
| // If we find a PHI more than once, we're on a cycle that |
| // won't prove fruitful. |
| if (isa<PHINode>(J) && !PHIs.insert(cast<PHINode>(J))) |
| break; |
| } |
| } |
| DeleteTriviallyDeadInstructions(); |
| } |
| return Changed; |
| } |