| //===-- SparcInternals.h ----------------------------------------*- C++ -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file was developed by the LLVM research group and is distributed under |
| // the University of Illinois Open Source License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file defines stuff that is to be private to the Sparc backend, but is |
| // shared among different portions of the backend. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #ifndef SPARC_INTERNALS_H |
| #define SPARC_INTERNALS_H |
| |
| #include "llvm/CodeGen/MachineInstrBuilder.h" |
| #include "llvm/Target/TargetMachine.h" |
| #include "llvm/Target/TargetSchedInfo.h" |
| #include "llvm/Target/TargetFrameInfo.h" |
| #include "llvm/Target/TargetCacheInfo.h" |
| #include "llvm/Target/TargetRegInfo.h" |
| #include "llvm/Type.h" |
| #include "SparcRegClassInfo.h" |
| #include "Config/sys/types.h" |
| |
| namespace llvm { |
| |
| class LiveRange; |
| class UltraSparc; |
| class Pass; |
| |
| enum SparcInstrSchedClass { |
| SPARC_NONE, /* Instructions with no scheduling restrictions */ |
| SPARC_IEUN, /* Integer class that can use IEU0 or IEU1 */ |
| SPARC_IEU0, /* Integer class IEU0 */ |
| SPARC_IEU1, /* Integer class IEU1 */ |
| SPARC_FPM, /* FP Multiply or Divide instructions */ |
| SPARC_FPA, /* All other FP instructions */ |
| SPARC_CTI, /* Control-transfer instructions */ |
| SPARC_LD, /* Load instructions */ |
| SPARC_ST, /* Store instructions */ |
| SPARC_SINGLE, /* Instructions that must issue by themselves */ |
| |
| SPARC_INV, /* This should stay at the end for the next value */ |
| SPARC_NUM_SCHED_CLASSES = SPARC_INV |
| }; |
| |
| |
| //--------------------------------------------------------------------------- |
| // enum SparcMachineOpCode. |
| // const TargetInstrDescriptor SparcMachineInstrDesc[] |
| // |
| // Purpose: |
| // Description of UltraSparc machine instructions. |
| // |
| //--------------------------------------------------------------------------- |
| |
| namespace V9 { |
| enum SparcMachineOpCode { |
| #define I(ENUM, OPCODESTRING, NUMOPERANDS, RESULTPOS, MAXIMM, IMMSE, \ |
| NUMDELAYSLOTS, LATENCY, SCHEDCLASS, INSTFLAGS) \ |
| ENUM, |
| #include "SparcInstr.def" |
| |
| // End-of-array marker |
| INVALID_OPCODE, |
| NUM_REAL_OPCODES = PHI, // number of valid opcodes |
| NUM_TOTAL_OPCODES = INVALID_OPCODE |
| }; |
| } |
| |
| |
| // Array of machine instruction descriptions... |
| extern const TargetInstrDescriptor SparcMachineInstrDesc[]; |
| |
| |
| //--------------------------------------------------------------------------- |
| // class UltraSparcInstrInfo |
| // |
| // Purpose: |
| // Information about individual instructions. |
| // Most information is stored in the SparcMachineInstrDesc array above. |
| // Other information is computed on demand, and most such functions |
| // default to member functions in base class TargetInstrInfo. |
| //--------------------------------------------------------------------------- |
| |
| struct UltraSparcInstrInfo : public TargetInstrInfo { |
| UltraSparcInstrInfo(); |
| |
| // |
| // All immediate constants are in position 1 except the |
| // store instructions and SETxx. |
| // |
| virtual int getImmedConstantPos(MachineOpCode opCode) const { |
| bool ignore; |
| if (this->maxImmedConstant(opCode, ignore) != 0) { |
| // 1st store opcode |
| assert(! this->isStore((MachineOpCode) V9::STBr - 1)); |
| // last store opcode |
| assert(! this->isStore((MachineOpCode) V9::STXFSRi + 1)); |
| |
| if (opCode == V9::SETSW || opCode == V9::SETUW || |
| opCode == V9::SETX || opCode == V9::SETHI) |
| return 0; |
| if (opCode >= V9::STBr && opCode <= V9::STXFSRi) |
| return 2; |
| return 1; |
| } |
| else |
| return -1; |
| } |
| |
| /// createNOPinstr - returns the target's implementation of NOP, which is |
| /// usually a pseudo-instruction, implemented by a degenerate version of |
| /// another instruction, e.g. X86: xchg ax, ax; SparcV9: sethi 0, g0 |
| /// |
| MachineInstr* createNOPinstr() const { |
| return BuildMI(V9::SETHI, 2).addZImm(0).addReg(SparcIntRegClass::g0); |
| } |
| |
| /// isNOPinstr - not having a special NOP opcode, we need to know if a given |
| /// instruction is interpreted as an `official' NOP instr, i.e., there may be |
| /// more than one way to `do nothing' but only one canonical way to slack off. |
| /// |
| bool isNOPinstr(const MachineInstr &MI) const { |
| // Make sure the instruction is EXACTLY `sethi g0, 0' |
| if (MI.getOpcode() == V9::SETHI && MI.getNumOperands() == 2) { |
| const MachineOperand &op0 = MI.getOperand(0), &op1 = MI.getOperand(1); |
| if (op0.isImmediate() && op0.getImmedValue() == 0 && |
| op1.isMachineRegister() && |
| op1.getMachineRegNum() == SparcIntRegClass::g0) |
| { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| virtual bool hasResultInterlock(MachineOpCode opCode) const |
| { |
| // All UltraSPARC instructions have interlocks (note that delay slots |
| // are not considered here). |
| // However, instructions that use the result of an FCMP produce a |
| // 9-cycle stall if they are issued less than 3 cycles after the FCMP. |
| // Force the compiler to insert a software interlock (i.e., gap of |
| // 2 other groups, including NOPs if necessary). |
| return (opCode == V9::FCMPS || opCode == V9::FCMPD || opCode == V9::FCMPQ); |
| } |
| |
| //------------------------------------------------------------------------- |
| // Queries about representation of LLVM quantities (e.g., constants) |
| //------------------------------------------------------------------------- |
| |
| virtual bool ConstantMayNotFitInImmedField(const Constant* CV, |
| const Instruction* I) const; |
| |
| //------------------------------------------------------------------------- |
| // Code generation support for creating individual machine instructions |
| //------------------------------------------------------------------------- |
| |
| // Get certain common op codes for the current target. This and all the |
| // Create* methods below should be moved to a machine code generation class |
| // |
| virtual MachineOpCode getNOPOpCode() const { return V9::NOP; } |
| |
| // Get the value of an integral constant in the form that must |
| // be put into the machine register. The specified constant is interpreted |
| // as (i.e., converted if necessary to) the specified destination type. The |
| // result is always returned as an uint64_t, since the representation of |
| // int64_t and uint64_t are identical. The argument can be any known const. |
| // |
| // isValidConstant is set to true if a valid constant was found. |
| // |
| virtual uint64_t ConvertConstantToIntType(const TargetMachine &target, |
| const Value *V, |
| const Type *destType, |
| bool &isValidConstant) const; |
| |
| // Create an instruction sequence to put the constant `val' into |
| // the virtual register `dest'. `val' may be a Constant or a |
| // GlobalValue, viz., the constant address of a global variable or function. |
| // The generated instructions are returned in `mvec'. |
| // Any temp. registers (TmpInstruction) created are recorded in mcfi. |
| // Any stack space required is allocated via mcff. |
| // |
| virtual void CreateCodeToLoadConst(const TargetMachine& target, |
| Function* F, |
| Value* val, |
| Instruction* dest, |
| std::vector<MachineInstr*>& mvec, |
| MachineCodeForInstruction& mcfi) const; |
| |
| // Create an instruction sequence to copy an integer value `val' |
| // to a floating point value `dest' by copying to memory and back. |
| // val must be an integral type. dest must be a Float or Double. |
| // The generated instructions are returned in `mvec'. |
| // Any temp. registers (TmpInstruction) created are recorded in mcfi. |
| // Any stack space required is allocated via mcff. |
| // |
| virtual void CreateCodeToCopyIntToFloat(const TargetMachine& target, |
| Function* F, |
| Value* val, |
| Instruction* dest, |
| std::vector<MachineInstr*>& mvec, |
| MachineCodeForInstruction& mcfi) const; |
| |
| // Similarly, create an instruction sequence to copy an FP value |
| // `val' to an integer value `dest' by copying to memory and back. |
| // The generated instructions are returned in `mvec'. |
| // Any temp. registers (TmpInstruction) created are recorded in mcfi. |
| // Any stack space required is allocated via mcff. |
| // |
| virtual void CreateCodeToCopyFloatToInt(const TargetMachine& target, |
| Function* F, |
| Value* val, |
| Instruction* dest, |
| std::vector<MachineInstr*>& mvec, |
| MachineCodeForInstruction& mcfi) const; |
| |
| // Create instruction(s) to copy src to dest, for arbitrary types |
| // The generated instructions are returned in `mvec'. |
| // Any temp. registers (TmpInstruction) created are recorded in mcfi. |
| // Any stack space required is allocated via mcff. |
| // |
| virtual void CreateCopyInstructionsByType(const TargetMachine& target, |
| Function* F, |
| Value* src, |
| Instruction* dest, |
| std::vector<MachineInstr*>& mvec, |
| MachineCodeForInstruction& mcfi) const; |
| |
| // Create instruction sequence to produce a sign-extended register value |
| // from an arbitrary sized value (sized in bits, not bytes). |
| // The generated instructions are appended to `mvec'. |
| // Any temp. registers (TmpInstruction) created are recorded in mcfi. |
| // Any stack space required is allocated via mcff. |
| // |
| virtual void CreateSignExtensionInstructions(const TargetMachine& target, |
| Function* F, |
| Value* srcVal, |
| Value* destVal, |
| unsigned int numLowBits, |
| std::vector<MachineInstr*>& mvec, |
| MachineCodeForInstruction& mcfi) const; |
| |
| // Create instruction sequence to produce a zero-extended register value |
| // from an arbitrary sized value (sized in bits, not bytes). |
| // The generated instructions are appended to `mvec'. |
| // Any temp. registers (TmpInstruction) created are recorded in mcfi. |
| // Any stack space required is allocated via mcff. |
| // |
| virtual void CreateZeroExtensionInstructions(const TargetMachine& target, |
| Function* F, |
| Value* srcVal, |
| Value* destVal, |
| unsigned int numLowBits, |
| std::vector<MachineInstr*>& mvec, |
| MachineCodeForInstruction& mcfi) const; |
| }; |
| |
| |
| //---------------------------------------------------------------------------- |
| // class UltraSparcRegInfo |
| // |
| // This class implements the virtual class TargetRegInfo for Sparc. |
| // |
| //---------------------------------------------------------------------------- |
| |
| class UltraSparcRegInfo : public TargetRegInfo { |
| |
| private: |
| |
| // Number of registers used for passing int args (usually 6: %o0 - %o5) |
| // |
| unsigned const NumOfIntArgRegs; |
| |
| // Number of registers used for passing float args (usually 32: %f0 - %f31) |
| // |
| unsigned const NumOfFloatArgRegs; |
| |
| // ======================== Private Methods ============================= |
| |
| // The following methods are used to color special live ranges (e.g. |
| // function args and return values etc.) with specific hardware registers |
| // as required. See SparcRegInfo.cpp for the implementation. |
| // |
| void suggestReg4RetAddr(MachineInstr *RetMI, |
| LiveRangeInfo &LRI) const; |
| |
| void suggestReg4CallAddr(MachineInstr *CallMI, LiveRangeInfo &LRI) const; |
| |
| // Helper used by the all the getRegType() functions. |
| int getRegTypeForClassAndType(unsigned regClassID, const Type* type) const; |
| |
| public: |
| // Type of registers available in Sparc. There can be several reg types |
| // in the same class. For instace, the float reg class has Single/Double |
| // types |
| // |
| enum RegTypes { |
| IntRegType, |
| FPSingleRegType, |
| FPDoubleRegType, |
| IntCCRegType, |
| FloatCCRegType, |
| SpecialRegType |
| }; |
| |
| // The actual register classes in the Sparc |
| // |
| // **** WARNING: If this enum order is changed, also modify |
| // getRegisterClassOfValue method below since it assumes this particular |
| // order for efficiency. |
| // |
| enum RegClassIDs { |
| IntRegClassID, // Integer |
| FloatRegClassID, // Float (both single/double) |
| IntCCRegClassID, // Int Condition Code |
| FloatCCRegClassID, // Float Condition code |
| SpecialRegClassID // Special (unallocated) registers |
| }; |
| |
| UltraSparcRegInfo(const UltraSparc &tgt); |
| |
| // To find the register class used for a specified Type |
| // |
| unsigned getRegClassIDOfType(const Type *type, |
| bool isCCReg = false) const; |
| |
| // To find the register class to which a specified register belongs |
| // |
| unsigned getRegClassIDOfRegType(int regType) const; |
| |
| // getZeroRegNum - returns the register that contains always zero this is the |
| // unified register number |
| // |
| virtual int getZeroRegNum() const; |
| |
| // getCallAddressReg - returns the reg used for pushing the address when a |
| // function is called. This can be used for other purposes between calls |
| // |
| unsigned getCallAddressReg() const; |
| |
| // Returns the register containing the return address. |
| // It should be made sure that this register contains the return |
| // value when a return instruction is reached. |
| // |
| unsigned getReturnAddressReg() const; |
| |
| // Number of registers used for passing int args (usually 6: %o0 - %o5) |
| // and float args (usually 32: %f0 - %f31) |
| // |
| unsigned const getNumOfIntArgRegs() const { return NumOfIntArgRegs; } |
| unsigned const getNumOfFloatArgRegs() const { return NumOfFloatArgRegs; } |
| |
| // Compute which register can be used for an argument, if any |
| // |
| int regNumForIntArg(bool inCallee, bool isVarArgsCall, |
| unsigned argNo, unsigned& regClassId) const; |
| |
| int regNumForFPArg(unsigned RegType, bool inCallee, bool isVarArgsCall, |
| unsigned argNo, unsigned& regClassId) const; |
| |
| // The following methods are used to color special live ranges (e.g. |
| // function args and return values etc.) with specific hardware registers |
| // as required. See SparcRegInfo.cpp for the implementation for Sparc. |
| // |
| void suggestRegs4MethodArgs(const Function *Meth, |
| LiveRangeInfo& LRI) const; |
| |
| void suggestRegs4CallArgs(MachineInstr *CallMI, |
| LiveRangeInfo& LRI) const; |
| |
| void suggestReg4RetValue(MachineInstr *RetMI, |
| LiveRangeInfo& LRI) const; |
| |
| void colorMethodArgs(const Function *Meth, LiveRangeInfo& LRI, |
| std::vector<MachineInstr*>& InstrnsBefore, |
| std::vector<MachineInstr*>& InstrnsAfter) const; |
| |
| // method used for printing a register for debugging purposes |
| // |
| void printReg(const LiveRange *LR) const; |
| |
| // returns the # of bytes of stack space allocated for each register |
| // type. For Sparc, currently we allocate 8 bytes on stack for all |
| // register types. We can optimize this later if necessary to save stack |
| // space (However, should make sure that stack alignment is correct) |
| // |
| inline int getSpilledRegSize(int RegType) const { |
| return 8; |
| } |
| |
| |
| // To obtain the return value and the indirect call address (if any) |
| // contained in a CALL machine instruction |
| // |
| const Value * getCallInstRetVal(const MachineInstr *CallMI) const; |
| const Value * getCallInstIndirectAddrVal(const MachineInstr *CallMI) const; |
| |
| // The following methods are used to generate "copy" machine instructions |
| // for an architecture. |
| // |
| // The function regTypeNeedsScratchReg() can be used to check whether a |
| // scratch register is needed to copy a register of type `regType' to |
| // or from memory. If so, such a scratch register can be provided by |
| // the caller (e.g., if it knows which regsiters are free); otherwise |
| // an arbitrary one will be chosen and spilled by the copy instructions. |
| // |
| bool regTypeNeedsScratchReg(int RegType, |
| int& scratchRegClassId) const; |
| |
| void cpReg2RegMI(std::vector<MachineInstr*>& mvec, |
| unsigned SrcReg, unsigned DestReg, |
| int RegType) const; |
| |
| void cpReg2MemMI(std::vector<MachineInstr*>& mvec, |
| unsigned SrcReg, unsigned DestPtrReg, |
| int Offset, int RegType, int scratchReg = -1) const; |
| |
| void cpMem2RegMI(std::vector<MachineInstr*>& mvec, |
| unsigned SrcPtrReg, int Offset, unsigned DestReg, |
| int RegType, int scratchReg = -1) const; |
| |
| void cpValue2Value(Value *Src, Value *Dest, |
| std::vector<MachineInstr*>& mvec) const; |
| |
| // Get the register type for a register identified different ways. |
| // Note that getRegTypeForLR(LR) != getRegTypeForDataType(LR->getType())! |
| // The reg class of a LR depends both on the Value types in it and whether |
| // they are CC registers or not (for example). |
| int getRegTypeForDataType(const Type* type) const; |
| int getRegTypeForLR(const LiveRange *LR) const; |
| int getRegType(int unifiedRegNum) const; |
| |
| virtual unsigned getFramePointer() const; |
| virtual unsigned getStackPointer() const; |
| }; |
| |
| |
| |
| |
| //--------------------------------------------------------------------------- |
| // class UltraSparcSchedInfo |
| // |
| // Purpose: |
| // Interface to instruction scheduling information for UltraSPARC. |
| // The parameter values above are based on UltraSPARC IIi. |
| //--------------------------------------------------------------------------- |
| |
| |
| class UltraSparcSchedInfo: public TargetSchedInfo { |
| public: |
| UltraSparcSchedInfo(const TargetMachine &tgt); |
| protected: |
| virtual void initializeResources(); |
| }; |
| |
| |
| //--------------------------------------------------------------------------- |
| // class UltraSparcFrameInfo |
| // |
| // Purpose: |
| // Interface to stack frame layout info for the UltraSPARC. |
| // Starting offsets for each area of the stack frame are aligned at |
| // a multiple of getStackFrameSizeAlignment(). |
| //--------------------------------------------------------------------------- |
| |
| class UltraSparcFrameInfo: public TargetFrameInfo { |
| const TargetMachine ⌖ |
| public: |
| UltraSparcFrameInfo(const TargetMachine &TM) |
| : TargetFrameInfo(StackGrowsDown, StackFrameSizeAlignment, 0), target(TM) {} |
| |
| public: |
| // These methods provide constant parameters of the frame layout. |
| // |
| int getStackFrameSizeAlignment() const { return StackFrameSizeAlignment;} |
| int getMinStackFrameSize() const { return MinStackFrameSize; } |
| int getNumFixedOutgoingArgs() const { return NumFixedOutgoingArgs; } |
| int getSizeOfEachArgOnStack() const { return SizeOfEachArgOnStack; } |
| bool argsOnStackHaveFixedSize() const { return true; } |
| |
| // This method adjusts a stack offset to meet alignment rules of target. |
| // The fixed OFFSET (0x7ff) must be subtracted and the result aligned. |
| virtual int adjustAlignment (int unalignedOffset, |
| bool growUp, |
| unsigned int align) const { |
| return unalignedOffset + (growUp? +1:-1)*((unalignedOffset-OFFSET) % align); |
| } |
| |
| // These methods compute offsets using the frame contents for a |
| // particular function. The frame contents are obtained from the |
| // MachineCodeInfoForMethod object for the given function. |
| // |
| int getFirstIncomingArgOffset (MachineFunction& mcInfo, |
| bool& growUp) const |
| { |
| growUp = true; // arguments area grows upwards |
| return FirstIncomingArgOffsetFromFP; |
| } |
| int getFirstOutgoingArgOffset (MachineFunction& mcInfo, |
| bool& growUp) const |
| { |
| growUp = true; // arguments area grows upwards |
| return FirstOutgoingArgOffsetFromSP; |
| } |
| int getFirstOptionalOutgoingArgOffset(MachineFunction& mcInfo, |
| bool& growUp)const |
| { |
| growUp = true; // arguments area grows upwards |
| return FirstOptionalOutgoingArgOffsetFromSP; |
| } |
| |
| int getFirstAutomaticVarOffset (MachineFunction& mcInfo, |
| bool& growUp) const; |
| int getRegSpillAreaOffset (MachineFunction& mcInfo, |
| bool& growUp) const; |
| int getTmpAreaOffset (MachineFunction& mcInfo, |
| bool& growUp) const; |
| int getDynamicAreaOffset (MachineFunction& mcInfo, |
| bool& growUp) const; |
| |
| // |
| // These methods specify the base register used for each stack area |
| // (generally FP or SP) |
| // |
| virtual int getIncomingArgBaseRegNum() const { |
| return (int) target.getRegInfo().getFramePointer(); |
| } |
| virtual int getOutgoingArgBaseRegNum() const { |
| return (int) target.getRegInfo().getStackPointer(); |
| } |
| virtual int getOptionalOutgoingArgBaseRegNum() const { |
| return (int) target.getRegInfo().getStackPointer(); |
| } |
| virtual int getAutomaticVarBaseRegNum() const { |
| return (int) target.getRegInfo().getFramePointer(); |
| } |
| virtual int getRegSpillAreaBaseRegNum() const { |
| return (int) target.getRegInfo().getFramePointer(); |
| } |
| virtual int getDynamicAreaBaseRegNum() const { |
| return (int) target.getRegInfo().getStackPointer(); |
| } |
| |
| virtual int getIncomingArgOffset(MachineFunction& mcInfo, |
| unsigned argNum) const { |
| assert(argsOnStackHaveFixedSize()); |
| |
| unsigned relativeOffset = argNum * getSizeOfEachArgOnStack(); |
| bool growUp; // do args grow up or down |
| int firstArg = getFirstIncomingArgOffset(mcInfo, growUp); |
| return growUp ? firstArg + relativeOffset : firstArg - relativeOffset; |
| } |
| |
| virtual int getOutgoingArgOffset(MachineFunction& mcInfo, |
| unsigned argNum) const { |
| assert(argsOnStackHaveFixedSize()); |
| //assert(((int) argNum - this->getNumFixedOutgoingArgs()) |
| // <= (int) mcInfo.getInfo()->getMaxOptionalNumArgs()); |
| |
| unsigned relativeOffset = argNum * getSizeOfEachArgOnStack(); |
| bool growUp; // do args grow up or down |
| int firstArg = getFirstOutgoingArgOffset(mcInfo, growUp); |
| return growUp ? firstArg + relativeOffset : firstArg - relativeOffset; |
| } |
| |
| private: |
| /*---------------------------------------------------------------------- |
| This diagram shows the stack frame layout used by llc on Sparc V9. |
| Note that only the location of automatic variables, spill area, |
| temporary storage, and dynamically allocated stack area are chosen |
| by us. The rest conform to the Sparc V9 ABI. |
| All stack addresses are offset by OFFSET = 0x7ff (2047). |
| |
| Alignment assumptions and other invariants: |
| (1) %sp+OFFSET and %fp+OFFSET are always aligned on 16-byte boundary |
| (2) Variables in automatic, spill, temporary, or dynamic regions |
| are aligned according to their size as in all memory accesses. |
| (3) Everything below the dynamically allocated stack area is only used |
| during a call to another function, so it is never needed when |
| the current function is active. This is why space can be allocated |
| dynamically by incrementing %sp any time within the function. |
| |
| STACK FRAME LAYOUT: |
| |
| ... |
| %fp+OFFSET+176 Optional extra incoming arguments# 1..N |
| %fp+OFFSET+168 Incoming argument #6 |
| ... ... |
| %fp+OFFSET+128 Incoming argument #1 |
| ... ... |
| ---%fp+OFFSET-0--------Bottom of caller's stack frame-------------------- |
| %fp+OFFSET-8 Automatic variables <-- ****TOP OF STACK FRAME**** |
| Spill area |
| Temporary storage |
| ... |
| |
| %sp+OFFSET+176+8N Bottom of dynamically allocated stack area |
| %sp+OFFSET+168+8N Optional extra outgoing argument# N |
| ... ... |
| %sp+OFFSET+176 Optional extra outgoing argument# 1 |
| %sp+OFFSET+168 Outgoing argument #6 |
| ... ... |
| %sp+OFFSET+128 Outgoing argument #1 |
| %sp+OFFSET+120 Save area for %i7 |
| ... ... |
| %sp+OFFSET+0 Save area for %l0 <-- ****BOTTOM OF STACK FRAME**** |
| |
| *----------------------------------------------------------------------*/ |
| |
| // All stack addresses must be offset by 0x7ff (2047) on Sparc V9. |
| static const int OFFSET = (int) 0x7ff; |
| static const int StackFrameSizeAlignment = 16; |
| static const int MinStackFrameSize = 176; |
| static const int NumFixedOutgoingArgs = 6; |
| static const int SizeOfEachArgOnStack = 8; |
| static const int FirstIncomingArgOffsetFromFP = 128 + OFFSET; |
| static const int FirstOptionalIncomingArgOffsetFromFP = 176 + OFFSET; |
| static const int StaticAreaOffsetFromFP = 0 + OFFSET; |
| static const int FirstOutgoingArgOffsetFromSP = 128 + OFFSET; |
| static const int FirstOptionalOutgoingArgOffsetFromSP = 176 + OFFSET; |
| }; |
| |
| |
| //--------------------------------------------------------------------------- |
| // class UltraSparcCacheInfo |
| // |
| // Purpose: |
| // Interface to cache parameters for the UltraSPARC. |
| // Just use defaults for now. |
| //--------------------------------------------------------------------------- |
| |
| struct UltraSparcCacheInfo: public TargetCacheInfo { |
| UltraSparcCacheInfo(const TargetMachine &T) : TargetCacheInfo(T) {} |
| }; |
| |
| |
| /// createStackSlotsPass - External interface to stack-slots pass that enters 2 |
| /// empty slots at the top of each function stack |
| Pass *createStackSlotsPass(const TargetMachine &TM); |
| |
| // Interface to pre-selection pass that specializes LLVM code for a target |
| // machine. |
| FunctionPass *createPreSelectionPass(const TargetMachine &TM); |
| |
| // External interface to peephole optimization pass operating on machine code. |
| FunctionPass *createPeepholeOptsPass(const TargetMachine &TM); |
| |
| |
| //--------------------------------------------------------------------------- |
| // class UltraSparc |
| // |
| // Purpose: |
| // Primary interface to machine description for the UltraSPARC. |
| // Primarily just initializes machine-dependent parameters in |
| // class TargetMachine, and creates machine-dependent subclasses |
| // for classes such as InstrInfo, SchedInfo and RegInfo. |
| //--------------------------------------------------------------------------- |
| |
| class UltraSparc : public TargetMachine { |
| UltraSparcInstrInfo instrInfo; |
| UltraSparcSchedInfo schedInfo; |
| UltraSparcRegInfo regInfo; |
| UltraSparcFrameInfo frameInfo; |
| UltraSparcCacheInfo cacheInfo; |
| public: |
| UltraSparc(); |
| |
| virtual const TargetInstrInfo &getInstrInfo() const { return instrInfo; } |
| virtual const TargetSchedInfo &getSchedInfo() const { return schedInfo; } |
| virtual const TargetRegInfo &getRegInfo() const { return regInfo; } |
| virtual const TargetFrameInfo &getFrameInfo() const { return frameInfo; } |
| virtual const TargetCacheInfo &getCacheInfo() const { return cacheInfo; } |
| |
| virtual bool addPassesToEmitAssembly(PassManager &PM, std::ostream &Out); |
| virtual bool addPassesToJITCompile(FunctionPassManager &PM); |
| virtual bool addPassesToEmitMachineCode(FunctionPassManager &PM, |
| MachineCodeEmitter &MCE); |
| virtual void replaceMachineCodeForFunction(void *Old, void *New); |
| |
| // getPrologEpilogInsertionPass - Inserts prolog/epilog code. |
| FunctionPass* getPrologEpilogInsertionPass(); |
| |
| // getFunctionAsmPrinterPass - Writes out machine code for a single function |
| Pass* getFunctionAsmPrinterPass(std::ostream &Out); |
| |
| // getModuleAsmPrinterPass - Writes generated machine code to assembly file. |
| Pass* getModuleAsmPrinterPass(std::ostream &Out); |
| |
| // getBytecodeAsmPrinterPass - Emits final LLVM bytecode to assembly file. |
| Pass* getBytecodeAsmPrinterPass(std::ostream &Out); |
| }; |
| |
| } // End llvm namespace |
| |
| #endif |