Check in LLVM r95781.
diff --git a/docs/tutorial/LangImpl5.html b/docs/tutorial/LangImpl5.html
new file mode 100644
index 0000000..bd175c0
--- /dev/null
+++ b/docs/tutorial/LangImpl5.html
@@ -0,0 +1,1773 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
+ "http://www.w3.org/TR/html4/strict.dtd">
+
+<html>
+<head>
+ <title>Kaleidoscope: Extending the Language: Control Flow</title>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+ <meta name="author" content="Chris Lattner">
+ <link rel="stylesheet" href="../llvm.css" type="text/css">
+</head>
+
+<body>
+
+<div class="doc_title">Kaleidoscope: Extending the Language: Control Flow</div>
+
+<ul>
+<li><a href="index.html">Up to Tutorial Index</a></li>
+<li>Chapter 5
+ <ol>
+ <li><a href="#intro">Chapter 5 Introduction</a></li>
+ <li><a href="#ifthen">If/Then/Else</a>
+ <ol>
+ <li><a href="#iflexer">Lexer Extensions</a></li>
+ <li><a href="#ifast">AST Extensions</a></li>
+ <li><a href="#ifparser">Parser Extensions</a></li>
+ <li><a href="#ifir">LLVM IR</a></li>
+ <li><a href="#ifcodegen">Code Generation</a></li>
+ </ol>
+ </li>
+ <li><a href="#for">'for' Loop Expression</a>
+ <ol>
+ <li><a href="#forlexer">Lexer Extensions</a></li>
+ <li><a href="#forast">AST Extensions</a></li>
+ <li><a href="#forparser">Parser Extensions</a></li>
+ <li><a href="#forir">LLVM IR</a></li>
+ <li><a href="#forcodegen">Code Generation</a></li>
+ </ol>
+ </li>
+ <li><a href="#code">Full Code Listing</a></li>
+ </ol>
+</li>
+<li><a href="LangImpl6.html">Chapter 6</a>: Extending the Language:
+User-defined Operators</li>
+</ul>
+
+<div class="doc_author">
+ <p>Written by <a href="mailto:sabre@nondot.org">Chris Lattner</a></p>
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="intro">Chapter 5 Introduction</a></div>
+<!-- *********************************************************************** -->
+
+<div class="doc_text">
+
+<p>Welcome to Chapter 5 of the "<a href="index.html">Implementing a language
+with LLVM</a>" tutorial. Parts 1-4 described the implementation of the simple
+Kaleidoscope language and included support for generating LLVM IR, followed by
+optimizations and a JIT compiler. Unfortunately, as presented, Kaleidoscope is
+mostly useless: it has no control flow other than call and return. This means
+that you can't have conditional branches in the code, significantly limiting its
+power. In this episode of "build that compiler", we'll extend Kaleidoscope to
+have an if/then/else expression plus a simple 'for' loop.</p>
+
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="ifthen">If/Then/Else</a></div>
+<!-- *********************************************************************** -->
+
+<div class="doc_text">
+
+<p>
+Extending Kaleidoscope to support if/then/else is quite straightforward. It
+basically requires adding lexer support for this "new" concept to the lexer,
+parser, AST, and LLVM code emitter. This example is nice, because it shows how
+easy it is to "grow" a language over time, incrementally extending it as new
+ideas are discovered.</p>
+
+<p>Before we get going on "how" we add this extension, lets talk about "what" we
+want. The basic idea is that we want to be able to write this sort of thing:
+</p>
+
+<div class="doc_code">
+<pre>
+def fib(x)
+ if x < 3 then
+ 1
+ else
+ fib(x-1)+fib(x-2);
+</pre>
+</div>
+
+<p>In Kaleidoscope, every construct is an expression: there are no statements.
+As such, the if/then/else expression needs to return a value like any other.
+Since we're using a mostly functional form, we'll have it evaluate its
+conditional, then return the 'then' or 'else' value based on how the condition
+was resolved. This is very similar to the C "?:" expression.</p>
+
+<p>The semantics of the if/then/else expression is that it evaluates the
+condition to a boolean equality value: 0.0 is considered to be false and
+everything else is considered to be true.
+If the condition is true, the first subexpression is evaluated and returned, if
+the condition is false, the second subexpression is evaluated and returned.
+Since Kaleidoscope allows side-effects, this behavior is important to nail down.
+</p>
+
+<p>Now that we know what we "want", lets break this down into its constituent
+pieces.</p>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="iflexer">Lexer Extensions for
+If/Then/Else</a></div>
+<!-- ======================================================================= -->
+
+
+<div class="doc_text">
+
+<p>The lexer extensions are straightforward. First we add new enum values
+for the relevant tokens:</p>
+
+<div class="doc_code">
+<pre>
+ // control
+ tok_if = -6, tok_then = -7, tok_else = -8,
+</pre>
+</div>
+
+<p>Once we have that, we recognize the new keywords in the lexer. This is pretty simple
+stuff:</p>
+
+<div class="doc_code">
+<pre>
+ ...
+ if (IdentifierStr == "def") return tok_def;
+ if (IdentifierStr == "extern") return tok_extern;
+ <b>if (IdentifierStr == "if") return tok_if;
+ if (IdentifierStr == "then") return tok_then;
+ if (IdentifierStr == "else") return tok_else;</b>
+ return tok_identifier;
+</pre>
+</div>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="ifast">AST Extensions for
+ If/Then/Else</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>To represent the new expression we add a new AST node for it:</p>
+
+<div class="doc_code">
+<pre>
+/// IfExprAST - Expression class for if/then/else.
+class IfExprAST : public ExprAST {
+ ExprAST *Cond, *Then, *Else;
+public:
+ IfExprAST(ExprAST *cond, ExprAST *then, ExprAST *_else)
+ : Cond(cond), Then(then), Else(_else) {}
+ virtual Value *Codegen();
+};
+</pre>
+</div>
+
+<p>The AST node just has pointers to the various subexpressions.</p>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="ifparser">Parser Extensions for
+If/Then/Else</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>Now that we have the relevant tokens coming from the lexer and we have the
+AST node to build, our parsing logic is relatively straightforward. First we
+define a new parsing function:</p>
+
+<div class="doc_code">
+<pre>
+/// ifexpr ::= 'if' expression 'then' expression 'else' expression
+static ExprAST *ParseIfExpr() {
+ getNextToken(); // eat the if.
+
+ // condition.
+ ExprAST *Cond = ParseExpression();
+ if (!Cond) return 0;
+
+ if (CurTok != tok_then)
+ return Error("expected then");
+ getNextToken(); // eat the then
+
+ ExprAST *Then = ParseExpression();
+ if (Then == 0) return 0;
+
+ if (CurTok != tok_else)
+ return Error("expected else");
+
+ getNextToken();
+
+ ExprAST *Else = ParseExpression();
+ if (!Else) return 0;
+
+ return new IfExprAST(Cond, Then, Else);
+}
+</pre>
+</div>
+
+<p>Next we hook it up as a primary expression:</p>
+
+<div class="doc_code">
+<pre>
+static ExprAST *ParsePrimary() {
+ switch (CurTok) {
+ default: return Error("unknown token when expecting an expression");
+ case tok_identifier: return ParseIdentifierExpr();
+ case tok_number: return ParseNumberExpr();
+ case '(': return ParseParenExpr();
+ <b>case tok_if: return ParseIfExpr();</b>
+ }
+}
+</pre>
+</div>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="ifir">LLVM IR for If/Then/Else</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>Now that we have it parsing and building the AST, the final piece is adding
+LLVM code generation support. This is the most interesting part of the
+if/then/else example, because this is where it starts to introduce new concepts.
+All of the code above has been thoroughly described in previous chapters.
+</p>
+
+<p>To motivate the code we want to produce, lets take a look at a simple
+example. Consider:</p>
+
+<div class="doc_code">
+<pre>
+extern foo();
+extern bar();
+def baz(x) if x then foo() else bar();
+</pre>
+</div>
+
+<p>If you disable optimizations, the code you'll (soon) get from Kaleidoscope
+looks like this:</p>
+
+<div class="doc_code">
+<pre>
+declare double @foo()
+
+declare double @bar()
+
+define double @baz(double %x) {
+entry:
+ %ifcond = fcmp one double %x, 0.000000e+00
+ br i1 %ifcond, label %then, label %else
+
+then: ; preds = %entry
+ %calltmp = call double @foo()
+ br label %ifcont
+
+else: ; preds = %entry
+ %calltmp1 = call double @bar()
+ br label %ifcont
+
+ifcont: ; preds = %else, %then
+ %iftmp = phi double [ %calltmp, %then ], [ %calltmp1, %else ]
+ ret double %iftmp
+}
+</pre>
+</div>
+
+<p>To visualize the control flow graph, you can use a nifty feature of the LLVM
+'<a href="http://llvm.org/cmds/opt.html">opt</a>' tool. If you put this LLVM IR
+into "t.ll" and run "<tt>llvm-as < t.ll | opt -analyze -view-cfg</tt>", <a
+href="../ProgrammersManual.html#ViewGraph">a window will pop up</a> and you'll
+see this graph:</p>
+
+<div style="text-align: center"><img src="LangImpl5-cfg.png" alt="Example CFG" width="423"
+height="315"></div>
+
+<p>Another way to get this is to call "<tt>F->viewCFG()</tt>" or
+"<tt>F->viewCFGOnly()</tt>" (where F is a "<tt>Function*</tt>") either by
+inserting actual calls into the code and recompiling or by calling these in the
+debugger. LLVM has many nice features for visualizing various graphs.</p>
+
+<p>Getting back to the generated code, it is fairly simple: the entry block
+evaluates the conditional expression ("x" in our case here) and compares the
+result to 0.0 with the "<tt><a href="../LangRef.html#i_fcmp">fcmp</a> one</tt>"
+instruction ('one' is "Ordered and Not Equal"). Based on the result of this
+expression, the code jumps to either the "then" or "else" blocks, which contain
+the expressions for the true/false cases.</p>
+
+<p>Once the then/else blocks are finished executing, they both branch back to the
+'ifcont' block to execute the code that happens after the if/then/else. In this
+case the only thing left to do is to return to the caller of the function. The
+question then becomes: how does the code know which expression to return?</p>
+
+<p>The answer to this question involves an important SSA operation: the
+<a href="http://en.wikipedia.org/wiki/Static_single_assignment_form">Phi
+operation</a>. If you're not familiar with SSA, <a
+href="http://en.wikipedia.org/wiki/Static_single_assignment_form">the wikipedia
+article</a> is a good introduction and there are various other introductions to
+it available on your favorite search engine. The short version is that
+"execution" of the Phi operation requires "remembering" which block control came
+from. The Phi operation takes on the value corresponding to the input control
+block. In this case, if control comes in from the "then" block, it gets the
+value of "calltmp". If control comes from the "else" block, it gets the value
+of "calltmp1".</p>
+
+<p>At this point, you are probably starting to think "Oh no! This means my
+simple and elegant front-end will have to start generating SSA form in order to
+use LLVM!". Fortunately, this is not the case, and we strongly advise
+<em>not</em> implementing an SSA construction algorithm in your front-end
+unless there is an amazingly good reason to do so. In practice, there are two
+sorts of values that float around in code written for your average imperative
+programming language that might need Phi nodes:</p>
+
+<ol>
+<li>Code that involves user variables: <tt>x = 1; x = x + 1; </tt></li>
+<li>Values that are implicit in the structure of your AST, such as the Phi node
+in this case.</li>
+</ol>
+
+<p>In <a href="LangImpl7.html">Chapter 7</a> of this tutorial ("mutable
+variables"), we'll talk about #1
+in depth. For now, just believe me that you don't need SSA construction to
+handle this case. For #2, you have the choice of using the techniques that we will
+describe for #1, or you can insert Phi nodes directly, if convenient. In this
+case, it is really really easy to generate the Phi node, so we choose to do it
+directly.</p>
+
+<p>Okay, enough of the motivation and overview, lets generate code!</p>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="ifcodegen">Code Generation for
+If/Then/Else</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>In order to generate code for this, we implement the <tt>Codegen</tt> method
+for <tt>IfExprAST</tt>:</p>
+
+<div class="doc_code">
+<pre>
+Value *IfExprAST::Codegen() {
+ Value *CondV = Cond->Codegen();
+ if (CondV == 0) return 0;
+
+ // Convert condition to a bool by comparing equal to 0.0.
+ CondV = Builder.CreateFCmpONE(CondV,
+ ConstantFP::get(getGlobalContext(), APFloat(0.0)),
+ "ifcond");
+</pre>
+</div>
+
+<p>This code is straightforward and similar to what we saw before. We emit the
+expression for the condition, then compare that value to zero to get a truth
+value as a 1-bit (bool) value.</p>
+
+<div class="doc_code">
+<pre>
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+
+ // Create blocks for the then and else cases. Insert the 'then' block at the
+ // end of the function.
+ BasicBlock *ThenBB = BasicBlock::Create(getGlobalContext(), "then", TheFunction);
+ BasicBlock *ElseBB = BasicBlock::Create(getGlobalContext(), "else");
+ BasicBlock *MergeBB = BasicBlock::Create(getGlobalContext(), "ifcont");
+
+ Builder.CreateCondBr(CondV, ThenBB, ElseBB);
+</pre>
+</div>
+
+<p>This code creates the basic blocks that are related to the if/then/else
+statement, and correspond directly to the blocks in the example above. The
+first line gets the current Function object that is being built. It
+gets this by asking the builder for the current BasicBlock, and asking that
+block for its "parent" (the function it is currently embedded into).</p>
+
+<p>Once it has that, it creates three blocks. Note that it passes "TheFunction"
+into the constructor for the "then" block. This causes the constructor to
+automatically insert the new block into the end of the specified function. The
+other two blocks are created, but aren't yet inserted into the function.</p>
+
+<p>Once the blocks are created, we can emit the conditional branch that chooses
+between them. Note that creating new blocks does not implicitly affect the
+IRBuilder, so it is still inserting into the block that the condition
+went into. Also note that it is creating a branch to the "then" block and the
+"else" block, even though the "else" block isn't inserted into the function yet.
+This is all ok: it is the standard way that LLVM supports forward
+references.</p>
+
+<div class="doc_code">
+<pre>
+ // Emit then value.
+ Builder.SetInsertPoint(ThenBB);
+
+ Value *ThenV = Then->Codegen();
+ if (ThenV == 0) return 0;
+
+ Builder.CreateBr(MergeBB);
+ // Codegen of 'Then' can change the current block, update ThenBB for the PHI.
+ ThenBB = Builder.GetInsertBlock();
+</pre>
+</div>
+
+<p>After the conditional branch is inserted, we move the builder to start
+inserting into the "then" block. Strictly speaking, this call moves the
+insertion point to be at the end of the specified block. However, since the
+"then" block is empty, it also starts out by inserting at the beginning of the
+block. :)</p>
+
+<p>Once the insertion point is set, we recursively codegen the "then" expression
+from the AST. To finish off the "then" block, we create an unconditional branch
+to the merge block. One interesting (and very important) aspect of the LLVM IR
+is that it <a href="../LangRef.html#functionstructure">requires all basic blocks
+to be "terminated"</a> with a <a href="../LangRef.html#terminators">control flow
+instruction</a> such as return or branch. This means that all control flow,
+<em>including fall throughs</em> must be made explicit in the LLVM IR. If you
+violate this rule, the verifier will emit an error.</p>
+
+<p>The final line here is quite subtle, but is very important. The basic issue
+is that when we create the Phi node in the merge block, we need to set up the
+block/value pairs that indicate how the Phi will work. Importantly, the Phi
+node expects to have an entry for each predecessor of the block in the CFG. Why
+then, are we getting the current block when we just set it to ThenBB 5 lines
+above? The problem is that the "Then" expression may actually itself change the
+block that the Builder is emitting into if, for example, it contains a nested
+"if/then/else" expression. Because calling Codegen recursively could
+arbitrarily change the notion of the current block, we are required to get an
+up-to-date value for code that will set up the Phi node.</p>
+
+<div class="doc_code">
+<pre>
+ // Emit else block.
+ TheFunction->getBasicBlockList().push_back(ElseBB);
+ Builder.SetInsertPoint(ElseBB);
+
+ Value *ElseV = Else->Codegen();
+ if (ElseV == 0) return 0;
+
+ Builder.CreateBr(MergeBB);
+ // Codegen of 'Else' can change the current block, update ElseBB for the PHI.
+ ElseBB = Builder.GetInsertBlock();
+</pre>
+</div>
+
+<p>Code generation for the 'else' block is basically identical to codegen for
+the 'then' block. The only significant difference is the first line, which adds
+the 'else' block to the function. Recall previously that the 'else' block was
+created, but not added to the function. Now that the 'then' and 'else' blocks
+are emitted, we can finish up with the merge code:</p>
+
+<div class="doc_code">
+<pre>
+ // Emit merge block.
+ TheFunction->getBasicBlockList().push_back(MergeBB);
+ Builder.SetInsertPoint(MergeBB);
+ PHINode *PN = Builder.CreatePHI(Type::getDoubleTy(getGlobalContext()),
+ "iftmp");
+
+ PN->addIncoming(ThenV, ThenBB);
+ PN->addIncoming(ElseV, ElseBB);
+ return PN;
+}
+</pre>
+</div>
+
+<p>The first two lines here are now familiar: the first adds the "merge" block
+to the Function object (it was previously floating, like the else block above).
+The second block changes the insertion point so that newly created code will go
+into the "merge" block. Once that is done, we need to create the PHI node and
+set up the block/value pairs for the PHI.</p>
+
+<p>Finally, the CodeGen function returns the phi node as the value computed by
+the if/then/else expression. In our example above, this returned value will
+feed into the code for the top-level function, which will create the return
+instruction.</p>
+
+<p>Overall, we now have the ability to execute conditional code in
+Kaleidoscope. With this extension, Kaleidoscope is a fairly complete language
+that can calculate a wide variety of numeric functions. Next up we'll add
+another useful expression that is familiar from non-functional languages...</p>
+
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="for">'for' Loop Expression</a></div>
+<!-- *********************************************************************** -->
+
+<div class="doc_text">
+
+<p>Now that we know how to add basic control flow constructs to the language,
+we have the tools to add more powerful things. Lets add something more
+aggressive, a 'for' expression:</p>
+
+<div class="doc_code">
+<pre>
+ extern putchard(char)
+ def printstar(n)
+ for i = 1, i < n, 1.0 in
+ putchard(42); # ascii 42 = '*'
+
+ # print 100 '*' characters
+ printstar(100);
+</pre>
+</div>
+
+<p>This expression defines a new variable ("i" in this case) which iterates from
+a starting value, while the condition ("i < n" in this case) is true,
+incrementing by an optional step value ("1.0" in this case). If the step value
+is omitted, it defaults to 1.0. While the loop is true, it executes its
+body expression. Because we don't have anything better to return, we'll just
+define the loop as always returning 0.0. In the future when we have mutable
+variables, it will get more useful.</p>
+
+<p>As before, lets talk about the changes that we need to Kaleidoscope to
+support this.</p>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="forlexer">Lexer Extensions for
+the 'for' Loop</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>The lexer extensions are the same sort of thing as for if/then/else:</p>
+
+<div class="doc_code">
+<pre>
+ ... in enum Token ...
+ // control
+ tok_if = -6, tok_then = -7, tok_else = -8,
+<b> tok_for = -9, tok_in = -10</b>
+
+ ... in gettok ...
+ if (IdentifierStr == "def") return tok_def;
+ if (IdentifierStr == "extern") return tok_extern;
+ if (IdentifierStr == "if") return tok_if;
+ if (IdentifierStr == "then") return tok_then;
+ if (IdentifierStr == "else") return tok_else;
+ <b>if (IdentifierStr == "for") return tok_for;
+ if (IdentifierStr == "in") return tok_in;</b>
+ return tok_identifier;
+</pre>
+</div>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="forast">AST Extensions for
+the 'for' Loop</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>The AST node is just as simple. It basically boils down to capturing
+the variable name and the constituent expressions in the node.</p>
+
+<div class="doc_code">
+<pre>
+/// ForExprAST - Expression class for for/in.
+class ForExprAST : public ExprAST {
+ std::string VarName;
+ ExprAST *Start, *End, *Step, *Body;
+public:
+ ForExprAST(const std::string &varname, ExprAST *start, ExprAST *end,
+ ExprAST *step, ExprAST *body)
+ : VarName(varname), Start(start), End(end), Step(step), Body(body) {}
+ virtual Value *Codegen();
+};
+</pre>
+</div>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="forparser">Parser Extensions for
+the 'for' Loop</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>The parser code is also fairly standard. The only interesting thing here is
+handling of the optional step value. The parser code handles it by checking to
+see if the second comma is present. If not, it sets the step value to null in
+the AST node:</p>
+
+<div class="doc_code">
+<pre>
+/// forexpr ::= 'for' identifier '=' expr ',' expr (',' expr)? 'in' expression
+static ExprAST *ParseForExpr() {
+ getNextToken(); // eat the for.
+
+ if (CurTok != tok_identifier)
+ return Error("expected identifier after for");
+
+ std::string IdName = IdentifierStr;
+ getNextToken(); // eat identifier.
+
+ if (CurTok != '=')
+ return Error("expected '=' after for");
+ getNextToken(); // eat '='.
+
+
+ ExprAST *Start = ParseExpression();
+ if (Start == 0) return 0;
+ if (CurTok != ',')
+ return Error("expected ',' after for start value");
+ getNextToken();
+
+ ExprAST *End = ParseExpression();
+ if (End == 0) return 0;
+
+ // The step value is optional.
+ ExprAST *Step = 0;
+ if (CurTok == ',') {
+ getNextToken();
+ Step = ParseExpression();
+ if (Step == 0) return 0;
+ }
+
+ if (CurTok != tok_in)
+ return Error("expected 'in' after for");
+ getNextToken(); // eat 'in'.
+
+ ExprAST *Body = ParseExpression();
+ if (Body == 0) return 0;
+
+ return new ForExprAST(IdName, Start, End, Step, Body);
+}
+</pre>
+</div>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="forir">LLVM IR for
+the 'for' Loop</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>Now we get to the good part: the LLVM IR we want to generate for this thing.
+With the simple example above, we get this LLVM IR (note that this dump is
+generated with optimizations disabled for clarity):
+</p>
+
+<div class="doc_code">
+<pre>
+declare double @putchard(double)
+
+define double @printstar(double %n) {
+entry:
+ ; initial value = 1.0 (inlined into phi)
+ br label %loop
+
+loop: ; preds = %loop, %entry
+ %i = phi double [ 1.000000e+00, %entry ], [ %nextvar, %loop ]
+ ; body
+ %calltmp = call double @putchard( double 4.200000e+01 )
+ ; increment
+ %nextvar = add double %i, 1.000000e+00
+
+ ; termination test
+ %cmptmp = fcmp ult double %i, %n
+ %booltmp = uitofp i1 %cmptmp to double
+ %loopcond = fcmp one double %booltmp, 0.000000e+00
+ br i1 %loopcond, label %loop, label %afterloop
+
+afterloop: ; preds = %loop
+ ; loop always returns 0.0
+ ret double 0.000000e+00
+}
+</pre>
+</div>
+
+<p>This loop contains all the same constructs we saw before: a phi node, several
+expressions, and some basic blocks. Lets see how this fits together.</p>
+
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="forcodegen">Code Generation for
+the 'for' Loop</a></div>
+<!-- ======================================================================= -->
+
+<div class="doc_text">
+
+<p>The first part of Codegen is very simple: we just output the start expression
+for the loop value:</p>
+
+<div class="doc_code">
+<pre>
+Value *ForExprAST::Codegen() {
+ // Emit the start code first, without 'variable' in scope.
+ Value *StartVal = Start->Codegen();
+ if (StartVal == 0) return 0;
+</pre>
+</div>
+
+<p>With this out of the way, the next step is to set up the LLVM basic block
+for the start of the loop body. In the case above, the whole loop body is one
+block, but remember that the body code itself could consist of multiple blocks
+(e.g. if it contains an if/then/else or a for/in expression).</p>
+
+<div class="doc_code">
+<pre>
+ // Make the new basic block for the loop header, inserting after current
+ // block.
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+ BasicBlock *PreheaderBB = Builder.GetInsertBlock();
+ BasicBlock *LoopBB = BasicBlock::Create(getGlobalContext(), "loop", TheFunction);
+
+ // Insert an explicit fall through from the current block to the LoopBB.
+ Builder.CreateBr(LoopBB);
+</pre>
+</div>
+
+<p>This code is similar to what we saw for if/then/else. Because we will need
+it to create the Phi node, we remember the block that falls through into the
+loop. Once we have that, we create the actual block that starts the loop and
+create an unconditional branch for the fall-through between the two blocks.</p>
+
+<div class="doc_code">
+<pre>
+ // Start insertion in LoopBB.
+ Builder.SetInsertPoint(LoopBB);
+
+ // Start the PHI node with an entry for Start.
+ PHINode *Variable = Builder.CreatePHI(Type::getDoubleTy(getGlobalContext()), VarName.c_str());
+ Variable->addIncoming(StartVal, PreheaderBB);
+</pre>
+</div>
+
+<p>Now that the "preheader" for the loop is set up, we switch to emitting code
+for the loop body. To begin with, we move the insertion point and create the
+PHI node for the loop induction variable. Since we already know the incoming
+value for the starting value, we add it to the Phi node. Note that the Phi will
+eventually get a second value for the backedge, but we can't set it up yet
+(because it doesn't exist!).</p>
+
+<div class="doc_code">
+<pre>
+ // Within the loop, the variable is defined equal to the PHI node. If it
+ // shadows an existing variable, we have to restore it, so save it now.
+ Value *OldVal = NamedValues[VarName];
+ NamedValues[VarName] = Variable;
+
+ // Emit the body of the loop. This, like any other expr, can change the
+ // current BB. Note that we ignore the value computed by the body, but don't
+ // allow an error.
+ if (Body->Codegen() == 0)
+ return 0;
+</pre>
+</div>
+
+<p>Now the code starts to get more interesting. Our 'for' loop introduces a new
+variable to the symbol table. This means that our symbol table can now contain
+either function arguments or loop variables. To handle this, before we codegen
+the body of the loop, we add the loop variable as the current value for its
+name. Note that it is possible that there is a variable of the same name in the
+outer scope. It would be easy to make this an error (emit an error and return
+null if there is already an entry for VarName) but we choose to allow shadowing
+of variables. In order to handle this correctly, we remember the Value that
+we are potentially shadowing in <tt>OldVal</tt> (which will be null if there is
+no shadowed variable).</p>
+
+<p>Once the loop variable is set into the symbol table, the code recursively
+codegen's the body. This allows the body to use the loop variable: any
+references to it will naturally find it in the symbol table.</p>
+
+<div class="doc_code">
+<pre>
+ // Emit the step value.
+ Value *StepVal;
+ if (Step) {
+ StepVal = Step->Codegen();
+ if (StepVal == 0) return 0;
+ } else {
+ // If not specified, use 1.0.
+ StepVal = ConstantFP::get(getGlobalContext(), APFloat(1.0));
+ }
+
+ Value *NextVar = Builder.CreateAdd(Variable, StepVal, "nextvar");
+</pre>
+</div>
+
+<p>Now that the body is emitted, we compute the next value of the iteration
+variable by adding the step value, or 1.0 if it isn't present. '<tt>NextVar</tt>'
+will be the value of the loop variable on the next iteration of the loop.</p>
+
+<div class="doc_code">
+<pre>
+ // Compute the end condition.
+ Value *EndCond = End->Codegen();
+ if (EndCond == 0) return EndCond;
+
+ // Convert condition to a bool by comparing equal to 0.0.
+ EndCond = Builder.CreateFCmpONE(EndCond,
+ ConstantFP::get(getGlobalContext(), APFloat(0.0)),
+ "loopcond");
+</pre>
+</div>
+
+<p>Finally, we evaluate the exit value of the loop, to determine whether the
+loop should exit. This mirrors the condition evaluation for the if/then/else
+statement.</p>
+
+<div class="doc_code">
+<pre>
+ // Create the "after loop" block and insert it.
+ BasicBlock *LoopEndBB = Builder.GetInsertBlock();
+ BasicBlock *AfterBB = BasicBlock::Create(getGlobalContext(), "afterloop", TheFunction);
+
+ // Insert the conditional branch into the end of LoopEndBB.
+ Builder.CreateCondBr(EndCond, LoopBB, AfterBB);
+
+ // Any new code will be inserted in AfterBB.
+ Builder.SetInsertPoint(AfterBB);
+</pre>
+</div>
+
+<p>With the code for the body of the loop complete, we just need to finish up
+the control flow for it. This code remembers the end block (for the phi node), then creates the block for the loop exit ("afterloop"). Based on the value of the
+exit condition, it creates a conditional branch that chooses between executing
+the loop again and exiting the loop. Any future code is emitted in the
+"afterloop" block, so it sets the insertion position to it.</p>
+
+<div class="doc_code">
+<pre>
+ // Add a new entry to the PHI node for the backedge.
+ Variable->addIncoming(NextVar, LoopEndBB);
+
+ // Restore the unshadowed variable.
+ if (OldVal)
+ NamedValues[VarName] = OldVal;
+ else
+ NamedValues.erase(VarName);
+
+ // for expr always returns 0.0.
+ return Constant::getNullValue(Type::getDoubleTy(getGlobalContext()));
+}
+</pre>
+</div>
+
+<p>The final code handles various cleanups: now that we have the "NextVar"
+value, we can add the incoming value to the loop PHI node. After that, we
+remove the loop variable from the symbol table, so that it isn't in scope after
+the for loop. Finally, code generation of the for loop always returns 0.0, so
+that is what we return from <tt>ForExprAST::Codegen</tt>.</p>
+
+<p>With this, we conclude the "adding control flow to Kaleidoscope" chapter of
+the tutorial. In this chapter we added two control flow constructs, and used them to motivate a couple of aspects of the LLVM IR that are important for front-end implementors
+to know. In the next chapter of our saga, we will get a bit crazier and add
+<a href="LangImpl6.html">user-defined operators</a> to our poor innocent
+language.</p>
+
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="code">Full Code Listing</a></div>
+<!-- *********************************************************************** -->
+
+<div class="doc_text">
+
+<p>
+Here is the complete code listing for our running example, enhanced with the
+if/then/else and for expressions.. To build this example, use:
+</p>
+
+<div class="doc_code">
+<pre>
+ # Compile
+ g++ -g toy.cpp `llvm-config --cppflags --ldflags --libs core jit native` -O3 -o toy
+ # Run
+ ./toy
+</pre>
+</div>
+
+<p>Here is the code:</p>
+
+<div class="doc_code">
+<pre>
+#include "llvm/DerivedTypes.h"
+#include "llvm/ExecutionEngine/ExecutionEngine.h"
+#include "llvm/ExecutionEngine/Interpreter.h"
+#include "llvm/ExecutionEngine/JIT.h"
+#include "llvm/LLVMContext.h"
+#include "llvm/Module.h"
+#include "llvm/PassManager.h"
+#include "llvm/Analysis/Verifier.h"
+#include "llvm/Target/TargetData.h"
+#include "llvm/Target/TargetSelect.h"
+#include "llvm/Transforms/Scalar.h"
+#include "llvm/Support/IRBuilder.h"
+#include <cstdio>
+#include <string>
+#include <map>
+#include <vector>
+using namespace llvm;
+
+//===----------------------------------------------------------------------===//
+// Lexer
+//===----------------------------------------------------------------------===//
+
+// The lexer returns tokens [0-255] if it is an unknown character, otherwise one
+// of these for known things.
+enum Token {
+ tok_eof = -1,
+
+ // commands
+ tok_def = -2, tok_extern = -3,
+
+ // primary
+ tok_identifier = -4, tok_number = -5,
+
+ // control
+ tok_if = -6, tok_then = -7, tok_else = -8,
+ tok_for = -9, tok_in = -10
+};
+
+static std::string IdentifierStr; // Filled in if tok_identifier
+static double NumVal; // Filled in if tok_number
+
+/// gettok - Return the next token from standard input.
+static int gettok() {
+ static int LastChar = ' ';
+
+ // Skip any whitespace.
+ while (isspace(LastChar))
+ LastChar = getchar();
+
+ if (isalpha(LastChar)) { // identifier: [a-zA-Z][a-zA-Z0-9]*
+ IdentifierStr = LastChar;
+ while (isalnum((LastChar = getchar())))
+ IdentifierStr += LastChar;
+
+ if (IdentifierStr == "def") return tok_def;
+ if (IdentifierStr == "extern") return tok_extern;
+ if (IdentifierStr == "if") return tok_if;
+ if (IdentifierStr == "then") return tok_then;
+ if (IdentifierStr == "else") return tok_else;
+ if (IdentifierStr == "for") return tok_for;
+ if (IdentifierStr == "in") return tok_in;
+ return tok_identifier;
+ }
+
+ if (isdigit(LastChar) || LastChar == '.') { // Number: [0-9.]+
+ std::string NumStr;
+ do {
+ NumStr += LastChar;
+ LastChar = getchar();
+ } while (isdigit(LastChar) || LastChar == '.');
+
+ NumVal = strtod(NumStr.c_str(), 0);
+ return tok_number;
+ }
+
+ if (LastChar == '#') {
+ // Comment until end of line.
+ do LastChar = getchar();
+ while (LastChar != EOF && LastChar != '\n' && LastChar != '\r');
+
+ if (LastChar != EOF)
+ return gettok();
+ }
+
+ // Check for end of file. Don't eat the EOF.
+ if (LastChar == EOF)
+ return tok_eof;
+
+ // Otherwise, just return the character as its ascii value.
+ int ThisChar = LastChar;
+ LastChar = getchar();
+ return ThisChar;
+}
+
+//===----------------------------------------------------------------------===//
+// Abstract Syntax Tree (aka Parse Tree)
+//===----------------------------------------------------------------------===//
+
+/// ExprAST - Base class for all expression nodes.
+class ExprAST {
+public:
+ virtual ~ExprAST() {}
+ virtual Value *Codegen() = 0;
+};
+
+/// NumberExprAST - Expression class for numeric literals like "1.0".
+class NumberExprAST : public ExprAST {
+ double Val;
+public:
+ NumberExprAST(double val) : Val(val) {}
+ virtual Value *Codegen();
+};
+
+/// VariableExprAST - Expression class for referencing a variable, like "a".
+class VariableExprAST : public ExprAST {
+ std::string Name;
+public:
+ VariableExprAST(const std::string &name) : Name(name) {}
+ virtual Value *Codegen();
+};
+
+/// BinaryExprAST - Expression class for a binary operator.
+class BinaryExprAST : public ExprAST {
+ char Op;
+ ExprAST *LHS, *RHS;
+public:
+ BinaryExprAST(char op, ExprAST *lhs, ExprAST *rhs)
+ : Op(op), LHS(lhs), RHS(rhs) {}
+ virtual Value *Codegen();
+};
+
+/// CallExprAST - Expression class for function calls.
+class CallExprAST : public ExprAST {
+ std::string Callee;
+ std::vector<ExprAST*> Args;
+public:
+ CallExprAST(const std::string &callee, std::vector<ExprAST*> &args)
+ : Callee(callee), Args(args) {}
+ virtual Value *Codegen();
+};
+
+/// IfExprAST - Expression class for if/then/else.
+class IfExprAST : public ExprAST {
+ ExprAST *Cond, *Then, *Else;
+public:
+ IfExprAST(ExprAST *cond, ExprAST *then, ExprAST *_else)
+ : Cond(cond), Then(then), Else(_else) {}
+ virtual Value *Codegen();
+};
+
+/// ForExprAST - Expression class for for/in.
+class ForExprAST : public ExprAST {
+ std::string VarName;
+ ExprAST *Start, *End, *Step, *Body;
+public:
+ ForExprAST(const std::string &varname, ExprAST *start, ExprAST *end,
+ ExprAST *step, ExprAST *body)
+ : VarName(varname), Start(start), End(end), Step(step), Body(body) {}
+ virtual Value *Codegen();
+};
+
+/// PrototypeAST - This class represents the "prototype" for a function,
+/// which captures its name, and its argument names (thus implicitly the number
+/// of arguments the function takes).
+class PrototypeAST {
+ std::string Name;
+ std::vector<std::string> Args;
+public:
+ PrototypeAST(const std::string &name, const std::vector<std::string> &args)
+ : Name(name), Args(args) {}
+
+ Function *Codegen();
+};
+
+/// FunctionAST - This class represents a function definition itself.
+class FunctionAST {
+ PrototypeAST *Proto;
+ ExprAST *Body;
+public:
+ FunctionAST(PrototypeAST *proto, ExprAST *body)
+ : Proto(proto), Body(body) {}
+
+ Function *Codegen();
+};
+
+//===----------------------------------------------------------------------===//
+// Parser
+//===----------------------------------------------------------------------===//
+
+/// CurTok/getNextToken - Provide a simple token buffer. CurTok is the current
+/// token the parser is looking at. getNextToken reads another token from the
+/// lexer and updates CurTok with its results.
+static int CurTok;
+static int getNextToken() {
+ return CurTok = gettok();
+}
+
+/// BinopPrecedence - This holds the precedence for each binary operator that is
+/// defined.
+static std::map<char, int> BinopPrecedence;
+
+/// GetTokPrecedence - Get the precedence of the pending binary operator token.
+static int GetTokPrecedence() {
+ if (!isascii(CurTok))
+ return -1;
+
+ // Make sure it's a declared binop.
+ int TokPrec = BinopPrecedence[CurTok];
+ if (TokPrec <= 0) return -1;
+ return TokPrec;
+}
+
+/// Error* - These are little helper functions for error handling.
+ExprAST *Error(const char *Str) { fprintf(stderr, "Error: %s\n", Str);return 0;}
+PrototypeAST *ErrorP(const char *Str) { Error(Str); return 0; }
+FunctionAST *ErrorF(const char *Str) { Error(Str); return 0; }
+
+static ExprAST *ParseExpression();
+
+/// identifierexpr
+/// ::= identifier
+/// ::= identifier '(' expression* ')'
+static ExprAST *ParseIdentifierExpr() {
+ std::string IdName = IdentifierStr;
+
+ getNextToken(); // eat identifier.
+
+ if (CurTok != '(') // Simple variable ref.
+ return new VariableExprAST(IdName);
+
+ // Call.
+ getNextToken(); // eat (
+ std::vector<ExprAST*> Args;
+ if (CurTok != ')') {
+ while (1) {
+ ExprAST *Arg = ParseExpression();
+ if (!Arg) return 0;
+ Args.push_back(Arg);
+
+ if (CurTok == ')') break;
+
+ if (CurTok != ',')
+ return Error("Expected ')' or ',' in argument list");
+ getNextToken();
+ }
+ }
+
+ // Eat the ')'.
+ getNextToken();
+
+ return new CallExprAST(IdName, Args);
+}
+
+/// numberexpr ::= number
+static ExprAST *ParseNumberExpr() {
+ ExprAST *Result = new NumberExprAST(NumVal);
+ getNextToken(); // consume the number
+ return Result;
+}
+
+/// parenexpr ::= '(' expression ')'
+static ExprAST *ParseParenExpr() {
+ getNextToken(); // eat (.
+ ExprAST *V = ParseExpression();
+ if (!V) return 0;
+
+ if (CurTok != ')')
+ return Error("expected ')'");
+ getNextToken(); // eat ).
+ return V;
+}
+
+/// ifexpr ::= 'if' expression 'then' expression 'else' expression
+static ExprAST *ParseIfExpr() {
+ getNextToken(); // eat the if.
+
+ // condition.
+ ExprAST *Cond = ParseExpression();
+ if (!Cond) return 0;
+
+ if (CurTok != tok_then)
+ return Error("expected then");
+ getNextToken(); // eat the then
+
+ ExprAST *Then = ParseExpression();
+ if (Then == 0) return 0;
+
+ if (CurTok != tok_else)
+ return Error("expected else");
+
+ getNextToken();
+
+ ExprAST *Else = ParseExpression();
+ if (!Else) return 0;
+
+ return new IfExprAST(Cond, Then, Else);
+}
+
+/// forexpr ::= 'for' identifier '=' expr ',' expr (',' expr)? 'in' expression
+static ExprAST *ParseForExpr() {
+ getNextToken(); // eat the for.
+
+ if (CurTok != tok_identifier)
+ return Error("expected identifier after for");
+
+ std::string IdName = IdentifierStr;
+ getNextToken(); // eat identifier.
+
+ if (CurTok != '=')
+ return Error("expected '=' after for");
+ getNextToken(); // eat '='.
+
+
+ ExprAST *Start = ParseExpression();
+ if (Start == 0) return 0;
+ if (CurTok != ',')
+ return Error("expected ',' after for start value");
+ getNextToken();
+
+ ExprAST *End = ParseExpression();
+ if (End == 0) return 0;
+
+ // The step value is optional.
+ ExprAST *Step = 0;
+ if (CurTok == ',') {
+ getNextToken();
+ Step = ParseExpression();
+ if (Step == 0) return 0;
+ }
+
+ if (CurTok != tok_in)
+ return Error("expected 'in' after for");
+ getNextToken(); // eat 'in'.
+
+ ExprAST *Body = ParseExpression();
+ if (Body == 0) return 0;
+
+ return new ForExprAST(IdName, Start, End, Step, Body);
+}
+
+/// primary
+/// ::= identifierexpr
+/// ::= numberexpr
+/// ::= parenexpr
+/// ::= ifexpr
+/// ::= forexpr
+static ExprAST *ParsePrimary() {
+ switch (CurTok) {
+ default: return Error("unknown token when expecting an expression");
+ case tok_identifier: return ParseIdentifierExpr();
+ case tok_number: return ParseNumberExpr();
+ case '(': return ParseParenExpr();
+ case tok_if: return ParseIfExpr();
+ case tok_for: return ParseForExpr();
+ }
+}
+
+/// binoprhs
+/// ::= ('+' primary)*
+static ExprAST *ParseBinOpRHS(int ExprPrec, ExprAST *LHS) {
+ // If this is a binop, find its precedence.
+ while (1) {
+ int TokPrec = GetTokPrecedence();
+
+ // If this is a binop that binds at least as tightly as the current binop,
+ // consume it, otherwise we are done.
+ if (TokPrec < ExprPrec)
+ return LHS;
+
+ // Okay, we know this is a binop.
+ int BinOp = CurTok;
+ getNextToken(); // eat binop
+
+ // Parse the primary expression after the binary operator.
+ ExprAST *RHS = ParsePrimary();
+ if (!RHS) return 0;
+
+ // If BinOp binds less tightly with RHS than the operator after RHS, let
+ // the pending operator take RHS as its LHS.
+ int NextPrec = GetTokPrecedence();
+ if (TokPrec < NextPrec) {
+ RHS = ParseBinOpRHS(TokPrec+1, RHS);
+ if (RHS == 0) return 0;
+ }
+
+ // Merge LHS/RHS.
+ LHS = new BinaryExprAST(BinOp, LHS, RHS);
+ }
+}
+
+/// expression
+/// ::= primary binoprhs
+///
+static ExprAST *ParseExpression() {
+ ExprAST *LHS = ParsePrimary();
+ if (!LHS) return 0;
+
+ return ParseBinOpRHS(0, LHS);
+}
+
+/// prototype
+/// ::= id '(' id* ')'
+static PrototypeAST *ParsePrototype() {
+ if (CurTok != tok_identifier)
+ return ErrorP("Expected function name in prototype");
+
+ std::string FnName = IdentifierStr;
+ getNextToken();
+
+ if (CurTok != '(')
+ return ErrorP("Expected '(' in prototype");
+
+ std::vector<std::string> ArgNames;
+ while (getNextToken() == tok_identifier)
+ ArgNames.push_back(IdentifierStr);
+ if (CurTok != ')')
+ return ErrorP("Expected ')' in prototype");
+
+ // success.
+ getNextToken(); // eat ')'.
+
+ return new PrototypeAST(FnName, ArgNames);
+}
+
+/// definition ::= 'def' prototype expression
+static FunctionAST *ParseDefinition() {
+ getNextToken(); // eat def.
+ PrototypeAST *Proto = ParsePrototype();
+ if (Proto == 0) return 0;
+
+ if (ExprAST *E = ParseExpression())
+ return new FunctionAST(Proto, E);
+ return 0;
+}
+
+/// toplevelexpr ::= expression
+static FunctionAST *ParseTopLevelExpr() {
+ if (ExprAST *E = ParseExpression()) {
+ // Make an anonymous proto.
+ PrototypeAST *Proto = new PrototypeAST("", std::vector<std::string>());
+ return new FunctionAST(Proto, E);
+ }
+ return 0;
+}
+
+/// external ::= 'extern' prototype
+static PrototypeAST *ParseExtern() {
+ getNextToken(); // eat extern.
+ return ParsePrototype();
+}
+
+//===----------------------------------------------------------------------===//
+// Code Generation
+//===----------------------------------------------------------------------===//
+
+static Module *TheModule;
+static IRBuilder<> Builder(getGlobalContext());
+static std::map<std::string, Value*> NamedValues;
+static FunctionPassManager *TheFPM;
+
+Value *ErrorV(const char *Str) { Error(Str); return 0; }
+
+Value *NumberExprAST::Codegen() {
+ return ConstantFP::get(getGlobalContext(), APFloat(Val));
+}
+
+Value *VariableExprAST::Codegen() {
+ // Look this variable up in the function.
+ Value *V = NamedValues[Name];
+ return V ? V : ErrorV("Unknown variable name");
+}
+
+Value *BinaryExprAST::Codegen() {
+ Value *L = LHS->Codegen();
+ Value *R = RHS->Codegen();
+ if (L == 0 || R == 0) return 0;
+
+ switch (Op) {
+ case '+': return Builder.CreateAdd(L, R, "addtmp");
+ case '-': return Builder.CreateSub(L, R, "subtmp");
+ case '*': return Builder.CreateMul(L, R, "multmp");
+ case '<':
+ L = Builder.CreateFCmpULT(L, R, "cmptmp");
+ // Convert bool 0/1 to double 0.0 or 1.0
+ return Builder.CreateUIToFP(L, Type::getDoubleTy(getGlobalContext()),
+ "booltmp");
+ default: return ErrorV("invalid binary operator");
+ }
+}
+
+Value *CallExprAST::Codegen() {
+ // Look up the name in the global module table.
+ Function *CalleeF = TheModule->getFunction(Callee);
+ if (CalleeF == 0)
+ return ErrorV("Unknown function referenced");
+
+ // If argument mismatch error.
+ if (CalleeF->arg_size() != Args.size())
+ return ErrorV("Incorrect # arguments passed");
+
+ std::vector<Value*> ArgsV;
+ for (unsigned i = 0, e = Args.size(); i != e; ++i) {
+ ArgsV.push_back(Args[i]->Codegen());
+ if (ArgsV.back() == 0) return 0;
+ }
+
+ return Builder.CreateCall(CalleeF, ArgsV.begin(), ArgsV.end(), "calltmp");
+}
+
+Value *IfExprAST::Codegen() {
+ Value *CondV = Cond->Codegen();
+ if (CondV == 0) return 0;
+
+ // Convert condition to a bool by comparing equal to 0.0.
+ CondV = Builder.CreateFCmpONE(CondV,
+ ConstantFP::get(getGlobalContext(), APFloat(0.0)),
+ "ifcond");
+
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+
+ // Create blocks for the then and else cases. Insert the 'then' block at the
+ // end of the function.
+ BasicBlock *ThenBB = BasicBlock::Create(getGlobalContext(), "then", TheFunction);
+ BasicBlock *ElseBB = BasicBlock::Create(getGlobalContext(), "else");
+ BasicBlock *MergeBB = BasicBlock::Create(getGlobalContext(), "ifcont");
+
+ Builder.CreateCondBr(CondV, ThenBB, ElseBB);
+
+ // Emit then value.
+ Builder.SetInsertPoint(ThenBB);
+
+ Value *ThenV = Then->Codegen();
+ if (ThenV == 0) return 0;
+
+ Builder.CreateBr(MergeBB);
+ // Codegen of 'Then' can change the current block, update ThenBB for the PHI.
+ ThenBB = Builder.GetInsertBlock();
+
+ // Emit else block.
+ TheFunction->getBasicBlockList().push_back(ElseBB);
+ Builder.SetInsertPoint(ElseBB);
+
+ Value *ElseV = Else->Codegen();
+ if (ElseV == 0) return 0;
+
+ Builder.CreateBr(MergeBB);
+ // Codegen of 'Else' can change the current block, update ElseBB for the PHI.
+ ElseBB = Builder.GetInsertBlock();
+
+ // Emit merge block.
+ TheFunction->getBasicBlockList().push_back(MergeBB);
+ Builder.SetInsertPoint(MergeBB);
+ PHINode *PN = Builder.CreatePHI(Type::getDoubleTy(getGlobalContext()),
+ "iftmp");
+
+ PN->addIncoming(ThenV, ThenBB);
+ PN->addIncoming(ElseV, ElseBB);
+ return PN;
+}
+
+Value *ForExprAST::Codegen() {
+ // Output this as:
+ // ...
+ // start = startexpr
+ // goto loop
+ // loop:
+ // variable = phi [start, loopheader], [nextvariable, loopend]
+ // ...
+ // bodyexpr
+ // ...
+ // loopend:
+ // step = stepexpr
+ // nextvariable = variable + step
+ // endcond = endexpr
+ // br endcond, loop, endloop
+ // outloop:
+
+ // Emit the start code first, without 'variable' in scope.
+ Value *StartVal = Start->Codegen();
+ if (StartVal == 0) return 0;
+
+ // Make the new basic block for the loop header, inserting after current
+ // block.
+ Function *TheFunction = Builder.GetInsertBlock()->getParent();
+ BasicBlock *PreheaderBB = Builder.GetInsertBlock();
+ BasicBlock *LoopBB = BasicBlock::Create(getGlobalContext(), "loop", TheFunction);
+
+ // Insert an explicit fall through from the current block to the LoopBB.
+ Builder.CreateBr(LoopBB);
+
+ // Start insertion in LoopBB.
+ Builder.SetInsertPoint(LoopBB);
+
+ // Start the PHI node with an entry for Start.
+ PHINode *Variable = Builder.CreatePHI(Type::getDoubleTy(getGlobalContext()), VarName.c_str());
+ Variable->addIncoming(StartVal, PreheaderBB);
+
+ // Within the loop, the variable is defined equal to the PHI node. If it
+ // shadows an existing variable, we have to restore it, so save it now.
+ Value *OldVal = NamedValues[VarName];
+ NamedValues[VarName] = Variable;
+
+ // Emit the body of the loop. This, like any other expr, can change the
+ // current BB. Note that we ignore the value computed by the body, but don't
+ // allow an error.
+ if (Body->Codegen() == 0)
+ return 0;
+
+ // Emit the step value.
+ Value *StepVal;
+ if (Step) {
+ StepVal = Step->Codegen();
+ if (StepVal == 0) return 0;
+ } else {
+ // If not specified, use 1.0.
+ StepVal = ConstantFP::get(getGlobalContext(), APFloat(1.0));
+ }
+
+ Value *NextVar = Builder.CreateAdd(Variable, StepVal, "nextvar");
+
+ // Compute the end condition.
+ Value *EndCond = End->Codegen();
+ if (EndCond == 0) return EndCond;
+
+ // Convert condition to a bool by comparing equal to 0.0.
+ EndCond = Builder.CreateFCmpONE(EndCond,
+ ConstantFP::get(getGlobalContext(), APFloat(0.0)),
+ "loopcond");
+
+ // Create the "after loop" block and insert it.
+ BasicBlock *LoopEndBB = Builder.GetInsertBlock();
+ BasicBlock *AfterBB = BasicBlock::Create(getGlobalContext(), "afterloop", TheFunction);
+
+ // Insert the conditional branch into the end of LoopEndBB.
+ Builder.CreateCondBr(EndCond, LoopBB, AfterBB);
+
+ // Any new code will be inserted in AfterBB.
+ Builder.SetInsertPoint(AfterBB);
+
+ // Add a new entry to the PHI node for the backedge.
+ Variable->addIncoming(NextVar, LoopEndBB);
+
+ // Restore the unshadowed variable.
+ if (OldVal)
+ NamedValues[VarName] = OldVal;
+ else
+ NamedValues.erase(VarName);
+
+
+ // for expr always returns 0.0.
+ return Constant::getNullValue(Type::getDoubleTy(getGlobalContext()));
+}
+
+Function *PrototypeAST::Codegen() {
+ // Make the function type: double(double,double) etc.
+ std::vector<const Type*> Doubles(Args.size(),
+ Type::getDoubleTy(getGlobalContext()));
+ FunctionType *FT = FunctionType::get(Type::getDoubleTy(getGlobalContext()),
+ Doubles, false);
+
+ Function *F = Function::Create(FT, Function::ExternalLinkage, Name, TheModule);
+
+ // If F conflicted, there was already something named 'Name'. If it has a
+ // body, don't allow redefinition or reextern.
+ if (F->getName() != Name) {
+ // Delete the one we just made and get the existing one.
+ F->eraseFromParent();
+ F = TheModule->getFunction(Name);
+
+ // If F already has a body, reject this.
+ if (!F->empty()) {
+ ErrorF("redefinition of function");
+ return 0;
+ }
+
+ // If F took a different number of args, reject.
+ if (F->arg_size() != Args.size()) {
+ ErrorF("redefinition of function with different # args");
+ return 0;
+ }
+ }
+
+ // Set names for all arguments.
+ unsigned Idx = 0;
+ for (Function::arg_iterator AI = F->arg_begin(); Idx != Args.size();
+ ++AI, ++Idx) {
+ AI->setName(Args[Idx]);
+
+ // Add arguments to variable symbol table.
+ NamedValues[Args[Idx]] = AI;
+ }
+
+ return F;
+}
+
+Function *FunctionAST::Codegen() {
+ NamedValues.clear();
+
+ Function *TheFunction = Proto->Codegen();
+ if (TheFunction == 0)
+ return 0;
+
+ // Create a new basic block to start insertion into.
+ BasicBlock *BB = BasicBlock::Create(getGlobalContext(), "entry", TheFunction);
+ Builder.SetInsertPoint(BB);
+
+ if (Value *RetVal = Body->Codegen()) {
+ // Finish off the function.
+ Builder.CreateRet(RetVal);
+
+ // Validate the generated code, checking for consistency.
+ verifyFunction(*TheFunction);
+
+ // Optimize the function.
+ TheFPM->run(*TheFunction);
+
+ return TheFunction;
+ }
+
+ // Error reading body, remove function.
+ TheFunction->eraseFromParent();
+ return 0;
+}
+
+//===----------------------------------------------------------------------===//
+// Top-Level parsing and JIT Driver
+//===----------------------------------------------------------------------===//
+
+static ExecutionEngine *TheExecutionEngine;
+
+static void HandleDefinition() {
+ if (FunctionAST *F = ParseDefinition()) {
+ if (Function *LF = F->Codegen()) {
+ fprintf(stderr, "Read function definition:");
+ LF->dump();
+ }
+ } else {
+ // Skip token for error recovery.
+ getNextToken();
+ }
+}
+
+static void HandleExtern() {
+ if (PrototypeAST *P = ParseExtern()) {
+ if (Function *F = P->Codegen()) {
+ fprintf(stderr, "Read extern: ");
+ F->dump();
+ }
+ } else {
+ // Skip token for error recovery.
+ getNextToken();
+ }
+}
+
+static void HandleTopLevelExpression() {
+ // Evaluate a top-level expression into an anonymous function.
+ if (FunctionAST *F = ParseTopLevelExpr()) {
+ if (Function *LF = F->Codegen()) {
+ // JIT the function, returning a function pointer.
+ void *FPtr = TheExecutionEngine->getPointerToFunction(LF);
+
+ // Cast it to the right type (takes no arguments, returns a double) so we
+ // can call it as a native function.
+ double (*FP)() = (double (*)())(intptr_t)FPtr;
+ fprintf(stderr, "Evaluated to %f\n", FP());
+ }
+ } else {
+ // Skip token for error recovery.
+ getNextToken();
+ }
+}
+
+/// top ::= definition | external | expression | ';'
+static void MainLoop() {
+ while (1) {
+ fprintf(stderr, "ready> ");
+ switch (CurTok) {
+ case tok_eof: return;
+ case ';': getNextToken(); break; // ignore top-level semicolons.
+ case tok_def: HandleDefinition(); break;
+ case tok_extern: HandleExtern(); break;
+ default: HandleTopLevelExpression(); break;
+ }
+ }
+}
+
+//===----------------------------------------------------------------------===//
+// "Library" functions that can be "extern'd" from user code.
+//===----------------------------------------------------------------------===//
+
+/// putchard - putchar that takes a double and returns 0.
+extern "C"
+double putchard(double X) {
+ putchar((char)X);
+ return 0;
+}
+
+//===----------------------------------------------------------------------===//
+// Main driver code.
+//===----------------------------------------------------------------------===//
+
+int main() {
+ InitializeNativeTarget();
+ LLVMContext &Context = getGlobalContext();
+
+ // Install standard binary operators.
+ // 1 is lowest precedence.
+ BinopPrecedence['<'] = 10;
+ BinopPrecedence['+'] = 20;
+ BinopPrecedence['-'] = 20;
+ BinopPrecedence['*'] = 40; // highest.
+
+ // Prime the first token.
+ fprintf(stderr, "ready> ");
+ getNextToken();
+
+ // Make the module, which holds all the code.
+ TheModule = new Module("my cool jit", Context);
+
+ // Create the JIT. This takes ownership of the module.
+ TheExecutionEngine = EngineBuilder(TheModule).create();
+
+ FunctionPassManager OurFPM(TheModule);
+
+ // Set up the optimizer pipeline. Start with registering info about how the
+ // target lays out data structures.
+ OurFPM.add(new TargetData(*TheExecutionEngine->getTargetData()));
+ // Do simple "peephole" optimizations and bit-twiddling optzns.
+ OurFPM.add(createInstructionCombiningPass());
+ // Reassociate expressions.
+ OurFPM.add(createReassociatePass());
+ // Eliminate Common SubExpressions.
+ OurFPM.add(createGVNPass());
+ // Simplify the control flow graph (deleting unreachable blocks, etc).
+ OurFPM.add(createCFGSimplificationPass());
+
+ OurFPM.doInitialization();
+
+ // Set the global so the code gen can use this.
+ TheFPM = &OurFPM;
+
+ // Run the main "interpreter loop" now.
+ MainLoop();
+
+ TheFPM = 0;
+
+ // Print out all of the generated code.
+ TheModule->dump();
+
+ return 0;
+}
+</pre>
+</div>
+
+<a href="LangImpl6.html">Next: Extending the language: user-defined operators</a>
+</div>
+
+<!-- *********************************************************************** -->
+<hr>
+<address>
+ <a href="http://jigsaw.w3.org/css-validator/check/referer"><img
+ src="http://jigsaw.w3.org/css-validator/images/vcss" alt="Valid CSS!"></a>
+ <a href="http://validator.w3.org/check/referer"><img
+ src="http://www.w3.org/Icons/valid-html401" alt="Valid HTML 4.01!"></a>
+
+ <a href="mailto:sabre@nondot.org">Chris Lattner</a><br>
+ <a href="http://llvm.org">The LLVM Compiler Infrastructure</a><br>
+ Last modified: $Date: 2010-02-03 09:27:31 -0800 (Wed, 03 Feb 2010) $
+</address>
+</body>
+</html>