It's not necessary to do rounding for alloca operations when the requested
alignment is equal to the stack alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40004 91177308-0d34-0410-b5e6-96231b3b80d8
diff --git a/docs/MakefileGuide.html b/docs/MakefileGuide.html
new file mode 100644
index 0000000..9cb5b15
--- /dev/null
+++ b/docs/MakefileGuide.html
@@ -0,0 +1,1046 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html>
+<head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+ <title>LLVM Makefile Guide</title>
+ <link rel="stylesheet" href="llvm.css" type="text/css">
+</head>
+<body>
+
+<div class="doc_title">LLVM Makefile Guide</div>
+
+<ol>
+ <li><a href="#introduction">Introduction</a></li>
+ <li><a href="#general">General Concepts</a>
+ <ol>
+ <li><a href="#projects">Projects</a></li>
+ <li><a href="#varvals">Variable Values</a></li>
+ <li><a href="#including">Including Makefiles</a>
+ <ol>
+ <li><a href="#Makefile">Makefile</a></li>
+ <li><a href="#Makefile.common">Makefile.common</a></li>
+ <li><a href="#Makefile.config">Makefile.config</a></li>
+ <li><a href="#Makefile.rules">Makefile.rules</a></li>
+ </ol>
+ </li>
+ <li><a href="#Comments">Comments</a></li>
+ </ol>
+ </li>
+ <li><a href="#tutorial">Tutorial</a>
+ <ol>
+ <li><a href="#libraries">Libraries</a>
+ <ol>
+ <li><a href="#BCModules">Bitcode Modules</a></li>
+ <li><a href="#LoadableModules">Loadable Modules</a></li>
+ </ol>
+ </li>
+ <li><a href="#tools">Tools</a>
+ <ol>
+ <li><a href="#JIT">JIT Tools</a></li>
+ </ol>
+ </li>
+ <li><a href="#projects">Projects</a></li>
+ </ol>
+ </li>
+ <li><a href="#targets">Targets Supported</a>
+ <ol>
+ <li><a href="#all">all</a></li>
+ <li><a href="#all-local">all-local</a></li>
+ <li><a href="#check">check</a></li>
+ <li><a href="#check-local">check-local</a></li>
+ <li><a href="#clean">clean</a></li>
+ <li><a href="#clean-local">clean-local</a></li>
+ <li><a href="#dist">dist</a></li>
+ <li><a href="#dist-check">dist-check</a></li>
+ <li><a href="#dist-clean">dist-clean</a></li>
+ <li><a href="#install">install</a></li>
+ <li><a href="#preconditions">preconditions</a></li>
+ <li><a href="#printvars">printvars</a></li>
+ <li><a href="#reconfigure">reconfigure</a></li>
+ <li><a href="#spotless">spotless</a></li>
+ <li><a href="#tags">tags</a></li>
+ <li><a href="#uninstall">uninstall</a></li>
+ </ol>
+ </li>
+ <li><a href="#variables">Using Variables</a>
+ <ol>
+ <li><a href="#setvars">Control Variables</a></li>
+ <li><a href="#overvars">Override Variables</a></li>
+ <li><a href="#getvars">Readable Variables</a></li>
+ <li><a href="#intvars">Internal Variables</a></li>
+ </ol>
+ </li>
+</ol>
+
+<div class="doc_author">
+ <p>Written by <a href="mailto:reid@x10sys.com">Reid Spencer</a></p>
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="introduction">Introduction </a></div>
+<!-- *********************************************************************** -->
+
+<div class="doc_text">
+ <p>This document provides <em>usage</em> information about the LLVM makefile
+ system. While loosely patterned after the BSD makefile system, LLVM has taken
+ a departure from BSD in order to implement additional features needed by LLVM.
+ Although makefile systems such as automake were attempted at one point, it
+ has become clear that the features needed by LLVM and the Makefile norm are
+ too great to use a more limited tool. Consequently, LLVM requires simply GNU
+ Make 3.79, a widely portable makefile processor. LLVM unabashedly makes heavy
+ use of the features of GNU Make so the dependency on GNU Make is firm. If
+ you're not familiar with <tt>make</tt>, it is recommended that you read the
+ <a href="http://www.gnu.org/software/make/manual/make.html">GNU Makefile
+ Manual</a>.</p>
+ <p>While this document is rightly part of the
+ <a href="ProgrammersManual.html">LLVM Programmer's Manual</a>, it is treated
+ separately here because of the volume of content and because it is often an
+ early source of bewilderment for new developers.</p>
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="general">General Concepts</a></div>
+<!-- *********************************************************************** -->
+
+<div class="doc_text">
+ <p>The LLVM Makefile System is the component of LLVM that is responsible for
+ building the software, testing it, generating distributions, checking those
+ distributions, installing and uninstalling, etc. It consists of a several
+ files throughout the source tree. These files and other general concepts are
+ described in this section.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="projects">Projects</a></div>
+<div class="doc_text">
+ <p>The LLVM Makefile System is quite generous. It not only builds its own
+ software, but it can build yours too. Built into the system is knowledge of
+ the <tt>llvm/projects</tt> directory. Any directory under <tt>projects</tt>
+ that has both a <tt>configure</tt> script and a <tt>Makefile</tt> is assumed
+ to be a project that uses the LLVM Makefile system. Building software that
+ uses LLVM does not require the LLVM Makefile System nor even placement in the
+ <tt>llvm/projects</tt> directory. However, doing so will allow your project
+ to get up and running quickly by utilizing the built-in features that are used
+ to compile LLVM. LLVM compiles itself using the same features of the makefile
+ system as used for projects.</p>
+ <p>For complete details on setting up your projects configuration, simply
+ mimic the <tt>llvm/projects/sample</tt> project or for further details,
+ consult the <a href="Projects.html">Projects.html</a> page.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="varvalues">Variable Values</a></div>
+<div class="doc_text">
+ <p>To use the makefile system, you simply create a file named
+ <tt>Makefile</tt> in your directory and declare values for certain variables.
+ The variables and values that you select determine what the makefile system
+ will do. These variables enable rules and processing in the makefile system
+ that automatically Do The Right Thing™.
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="including">Including Makefiles</a></div>
+<div class="doc_text">
+ <p>Setting variables alone is not enough. You must include into your Makefile
+ additional files that provide the rules of the LLVM Makefile system. The
+ various files involved are described in the sections that follow.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="Makefile">Makefile</a></div>
+<div class="doc_text">
+ <p>Each directory to participate in the build needs to have a file named
+ <tt>Makefile</tt>. This is the file first read by <tt>make</tt>. It has three
+ sections:</p>
+ <ol>
+ <li><a href="#setvars">Settable Variables</a> - Required that must be set
+ first.</li>
+ <li><a href="#Makefile.common">include <tt>$(LEVEL)/Makefile.common</tt></a>
+ - include the LLVM Makefile system.
+ <li><a href="#overvars">Override Variables</a> - Override variables set by
+ the LLVM Makefile system.
+ </ol>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="Makefile.common">Makefile.common</a>
+</div>
+<div class="doc_text">
+ <p>Every project must have a <tt>Makefile.common</tt> file at its top source
+ directory. This file serves three purposes:</p>
+ <ol>
+ <li>It includes the project's configuration makefile to obtain values
+ determined by the <tt>configure</tt> script. This is done by including the
+ <a href="#Makefile.config"><tt>$(LEVEL)/Makefile.config</tt></a> file.</li>
+ <li>It specifies any other (static) values that are needed throughout the
+ project. Only values that are used in all or a large proportion of the
+ project's directories should be placed here.</li>
+ <li>It includes the standard rules for the LLVM Makefile system,
+ <a href="#Makefile.rules"><tt>$(LLVM_SRC_ROOT)/Makefile.rules</tt></a>.
+ This file is the "guts" of the LLVM Makefile system.</li>
+ </ol>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="Makefile.config">Makefile.config</a>
+</div>
+<div class="doc_text">
+ <p>Every project must have a <tt>Makefile.config</tt> at the top of its
+ <em>build</em> directory. This file is <b>generated</b> by the
+ <tt>configure</tt> script from the pattern provided by the
+ <tt>Makefile.config.in</tt> file located at the top of the project's
+ <em>source</em> directory. The contents of this file depend largely on what
+ configuration items the project uses, however most projects can get what they
+ need by just relying on LLVM's configuration found in
+ <tt>$(LLVM_OBJ_ROOT)/Makefile.config</tt>.
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="Makefile.rules">Makefile.rules</a></div>
+<div class="doc_text">
+ <p>This file, located at <tt>$(LLVM_SRC_ROOT)/Makefile.rules</tt> is the heart
+ of the LLVM Makefile System. It provides all the logic, dependencies, and
+ rules for building the targets supported by the system. What it does largely
+ depends on the values of <tt>make</tt> <a href="#variables">variables</a> that
+ have been set <em>before</em> <tt>Makefile.rules</tt> is included.
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="Comments">Comments</a></div>
+<div class="doc_text">
+ <p>User Makefiles need not have comments in them unless the construction is
+ unusual or it does not strictly follow the rules and patterns of the LLVM
+ makefile system. Makefile comments are invoked with the pound (#) character.
+ The # character and any text following it, to the end of the line, are ignored
+ by <tt>make</tt>.</p>
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="tutorial">Tutorial</a></div>
+<!-- *********************************************************************** -->
+<div class="doc_text">
+ <p>This section provides some examples of the different kinds of modules you
+ can build with the LLVM makefile system. In general, each directory you
+ provide will build a single object although that object may be composed of
+ additionally compiled components.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="libraries">Libraries</a></div>
+<div class="doc_text">
+ <p>Only a few variable definitions are needed to build a regular library.
+ Normally, the makefile system will build all the software into a single
+ <tt>libname.o</tt> (pre-linked) object. This means the library is not
+ searchable and that the distinction between compilation units has been
+ dissolved. Optionally, you can ask for a shared library (.so), archive library
+ (.a) or to not have the default (relinked) library built. For example:</p>
+ <pre><tt>
+ LIBRARYNAME = mylib
+ SHARED_LIBRARY = 1
+ ARCHIVE_LIBRARY = 1
+ DONT_BUILD_RELINKED = 1
+ </tt></pre>
+ <p>says to build a library named "mylib" with both a shared library
+ (<tt>mylib.so</tt>) and an archive library (<tt>mylib.a</tt>) version but
+ not to build the relinked object (<tt>mylib.o</tt>). The contents of all the
+ libraries produced will be the same, they are just constructed differently.
+ Note that you normally do not need to specify the sources involved. The LLVM
+ Makefile system will infer the source files from the contents of the source
+ directory.</p>
+ <p>The <tt>LOADABLE_MODULE=1</tt> directive can be used in conjunction with
+ <tt>SHARED_LIBRARY=1</tt> to indicate that the resulting shared library should
+ be openable with the <tt>dlopen</tt> function and searchable with the
+ <tt>dlsym</tt> function (or your operating system's equivalents). While this
+ isn't strictly necessary on Linux and a few other platforms, it is required
+ on systems like HP-UX and Darwin. You should use <tt>LOADABLE_MODULE</tt> for
+ any shared library that you intend to be loaded into an tool via the
+ <tt>-load</tt> option. See the
+ <a href="WritingAnLLVMPass.html#makefile">WritingAnLLVMPass.html</a> document
+ for an example of why you might want to do this.
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="BCModules">Bitcode Modules</a></div>
+<div class="doc_text">
+ <p>In some situations, it is desireable to build a single bitcode module from
+ a variety of sources, instead of an archive, shared library, or bitcode
+ library. Bitcode modules can be specified in addition to any of the other
+ types of libraries by defining the <a href="#MODULE_NAME">MODULE_NAME</a>
+ variable. For example:</p>
+ <pre><tt>
+ LIBRARYNAME = mylib
+ BYTECODE_LIBRARY = 1
+ MODULE_NAME = mymod
+ </tt></pre>
+ <p>will build a module named <tt>mymod.bc</tt> from the sources in the
+ directory. This module will be an aggregation of all the bitcode modules
+ derived from the sources. The example will also build a bitcode archive
+ containing a bitcode module for each compiled source file. The difference is
+ subtle, but important depending on how the module or library is to be linked.
+ </p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection">
+ <a name="LoadableModules">Loadable Modules</a>
+</div>
+<div class="doc_text">
+ <p>In some situations, you need to create a loadable module. Loadable modules
+ can be loaded into programs like <tt>opt</tt> or <tt>llc</tt> to specify
+ additional passes to run or targets to support. Loadable modules are also
+ useful for debugging a pass or providing a pass with another package if that
+ pass can't be included in LLVM.</p>
+ <p>LLVM provides complete support for building such a module. All you need to
+ do is use the LOADABLE_MODULE variable in your Makefile. For example, to
+ build a loadable module named <tt>MyMod</tt> that uses the LLVM libraries
+ <tt>LLVMSupport.a</tt> and <tt>LLVMSystem.a</tt>, you would specify:</p>
+ <pre><tt>
+ LIBRARYNAME := MyMod
+ LOADABLE_MODULE := 1
+ LINK_COMPONENTS := support system
+ </tt></pre>
+ <p>Use of the <tt>LOADABLE_MODULE</tt> facility implies several things:</p>
+ <ol>
+ <li>There will be no "lib" prefix on the module. This differentiates it from
+ a standard shared library of the same name.</li>
+ <li>The <a href="#SHARED_LIBRARY">SHARED_LIBRARY</a> variable is turned
+ on.</li>
+ <li>The <a href="#LINK_LIBS_IN_SHARED">LINK_LIBS_IN_SHARED</a> variable
+ is turned on.</li>
+ <li>The <a href="#DONT_BUILD_RELINKED">DONT_BUILD_RELINKED</a> variable
+ is turned on.</li>
+ </ol>
+ <p>A loadable module is loaded by LLVM via the facilities of libtool's libltdl
+ library which is part of <tt>lib/System</tt> implementation.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="tools">Tools</a></div>
+<div class="doc_text">
+ <p>For building executable programs (tools), you must provide the name of the
+ tool and the names of the libraries you wish to link with the tool. For
+ example:</p>
+ <pre><tt>
+ TOOLNAME = mytool
+ USEDLIBS = mylib
+ LINK_COMPONENTS = support system
+ </tt></pre>
+ <p>says that we are to build a tool name <tt>mytool</tt> and that it requires
+ three libraries: <tt>mylib</tt>, <tt>LLVMSupport.a</tt> and
+ <tt>LLVMSystem.a</tt>.</p>
+ <p>Note that two different variables are use to indicate which libraries are
+ linked: <tt>USEDLIBS</tt> and <tt>LLVMLIBS</tt>. This distinction is necessary
+ to support projects. <tt>LLVMLIBS</tt> refers to the LLVM libraries found in
+ the LLVM object directory. <tt>USEDLIBS</tt> refers to the libraries built by
+ your project. In the case of building LLVM tools, <tt>USEDLIBS</tt> and
+ <tt>LLVMLIBS</tt> can be used interchangeably since the "project" is LLVM
+ itself and <tt>USEDLIBS</tt> refers to the same place as <tt>LLVMLIBS</tt>.
+ </p>
+ <p>Also note that there are two different ways of specifying a library: with a
+ <tt>.a</tt> suffix and without. Without the suffix, the entry refers to the
+ re-linked (.o) file which will include <em>all</em> symbols of the library.
+ This is useful, for example, to include all passes from a library of passes.
+ If the <tt>.a</tt> suffix is used then the library is linked as a searchable
+ library (with the <tt>-l</tt> option). In this case, only the symbols that are
+ unresolved <em>at that point</em> will be resolved from the library, if they
+ exist. Other (unreferenced) symbols will not be included when the <tt>.a</tt>
+ syntax is used. Note that in order to use the <tt>.a</tt> suffix, the library
+ in question must have been built with the <tt>ARCHIVE_LIBRARY</tt> option set.
+ </p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsubsection"><a name="JIT">JIT Tools</a></div>
+<div class="doc_text">
+ <p>Many tools will want to use the JIT features of LLVM. To do this, you
+ simply specify that you want an execution 'engine', and the makefiles will
+ automatically link in the appropriate JIT for the host or an interpreter
+ if none is available:</p>
+ <pre><tt>
+ TOOLNAME = my_jit_tool
+ USEDLIBS = mylib
+ LINK_COMPONENTS = engine
+ </tt></pre>
+ <p>Of course, any additional libraries may be listed as other components. To
+ get a full understanding of how this changes the linker command, it is
+ recommended that you:</p>
+ <pre><tt>
+ cd examples/Fibonacci
+ make VERBOSE=1
+ </tt></pre>
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="targets">Targets Supported</a></div>
+<!-- *********************************************************************** -->
+
+<div class="doc_text">
+ <p>This section describes each of the targets that can be built using the LLVM
+ Makefile system. Any target can be invoked from any directory but not all are
+ applicable to a given directory (e.g. "check", "dist" and "install" will
+ always operate as if invoked from the top level directory).</p>
+
+ <table style="text-align:left">
+ <tr>
+ <th>Target Name</th><th>Implied Targets</th><th>Target Description</th>
+ </tr>
+ <tr><td><a href="#all"><tt>all</tt></a></td><td></td>
+ <td>Compile the software recursively. Default target.
+ </td></tr>
+ <tr><td><a href="#all-local"><tt>all-local</tt></a></td><td></td>
+ <td>Compile the software in the local directory only.
+ </td></tr>
+ <tr><td><a href="#check"><tt>check</tt></a></td><td></td>
+ <td>Change to the <tt>test</tt> directory in a project and run the
+ test suite there.
+ </td></tr>
+ <tr><td><a href="#check-local"><tt>check-local</tt></a></td><td></td>
+ <td>Run a local test suite. Generally this is only defined in the
+ <tt>Makefile</tt> of the project's <tt>test</tt> directory.
+ </td></tr>
+ <tr><td><a href="#clean"><tt>clean</tt></a></td><td></td>
+ <td>Remove built objects recursively.
+ </td></tr>
+ <tr><td><a href="#clean-local"><tt>clean-local</tt></a></td><td></td>
+ <td>Remove built objects from the local directory only.
+ </td></tr>
+ <tr><td><a href="#dist"><tt>dist</tt></a></td><td>all</td>
+ <td>Prepare a source distribution tarball.
+ </td></tr>
+ <tr><td><a href="#dist-check"><tt>dist-check</tt></a></td><td>all</td>
+ <td>Prepare a source distribution tarball and check that it builds.
+ </td></tr>
+ <tr><td><a href="#dist-clean"><tt>dist-clean</tt></a></td><td>clean</td>
+ <td>Clean source distribution tarball temporary files.
+ </td></tr>
+ <tr><td><a href="#install"><tt>install</tt></a></td><td>all</td>
+ <td>Copy built objects to installation directory.
+ </td></tr>
+ <tr><td><a href="#preconditions"><tt>preconditions</tt></a></td><td>all</td>
+ <td>Check to make sure configuration and makefiles are up to date.
+ </td></tr>
+ <tr><td><a href="#printvars"><tt>printvars</tt></a></td><td>all</td>
+ <td>Prints variables defined by the makefile system (for debugging).
+ </td></tr>
+ <tr><td><a href="#tags"><tt>tags</tt></a></td><td></td>
+ <td>Make C and C++ tags files for emacs and vi.
+ </td></tr>
+ <tr><td><a href="#uninstall"><tt>uninstall</tt></a></td><td></td>
+ <td>Remove built objects from installation directory.
+ </td></tr>
+ </table>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="all">all (default)</a></div>
+<div class="doc_text">
+ <p>When you invoke <tt>make</tt> with no arguments, you are implicitly
+ instructing it to seek the "all" target (goal). This target is used for
+ building the software recursively and will do different things in different
+ directories. For example, in a <tt>lib</tt> directory, the "all" target will
+ compile source files and generate libraries. But, in a <tt>tools</tt>
+ directory, it will link libraries and generate executables.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="all-local">all-local</a></div>
+<div class="doc_text">
+ <p>This target is the same as <a href="#all">all</a> but it operates only on
+ the current directory instead of recursively.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="check">check</a></div>
+<div class="doc_text">
+ <p>This target can be invoked from anywhere within a project's directories
+ but always invokes the <a href="#check-local"><tt>check-local</tt></a> target
+ in the project's <tt>test</tt> directory, if it exists and has a
+ <tt>Makefile</tt>. A warning is produced otherwise. If
+ <a href="#TESTSUITE"><tt>TESTSUITE</tt></a> is defined on the <tt>make</tt>
+ command line, it will be passed down to the invocation of
+ <tt>make check-local</tt> in the <tt>test</tt> directory. The intended usage
+ for this is to assist in running specific suites of tests. If
+ <tt>TESTSUITE</tt> is not set, the implementation of <tt>check-local</tt>
+ should run all normal tests. It is up to the project to define what
+ different values for <tt>TESTSUTE</tt> will do. See the
+ <a href="TestingGuide.html">TestingGuide</a> for further details.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="check-local">check-local</a></div>
+<div class="doc_text">
+ <p>This target should be implemented by the <tt>Makefile</tt> in the project's
+ <tt>test</tt> directory. It is invoked by the <tt>check</tt> target elsewhere.
+ Each project is free to define the actions of <tt>check-local</tt> as
+ appropriate for that project. The LLVM project itself uses dejagnu to run a
+ suite of feature and regresson tests. Other projects may choose to use
+ dejagnu or any other testing mechanism.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="clean">clean</a></div>
+<div class="doc_text">
+ <p>This target cleans the build directory, recursively removing all things
+ that the Makefile builds. The cleaning rules have been made guarded so they
+ shouldn't go awry (via <tt>rm -f $(UNSET_VARIABLE)/*</tt> which will attempt
+ to erase the entire directory structure.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="clean-local">clean-local</a></div>
+<div class="doc_text">
+ <p>This target does the same thing as <tt>clean</tt> but only for the current
+ (local) directory.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="dist">dist</a></div>
+<div class="doc_text">
+ <p>This target builds a distribution tarball. It first builds the entire
+ project using the <tt>all</tt> target and then tars up the necessary files and
+ compresses it. The generated tarball is sufficient for a casual source
+ distribution, but probably not for a release (see <tt>dist-check</tt>).</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="dist-check">dist-check</a></div>
+<div class="doc_text">
+ <p>This target does the same thing as the <tt>dist</tt> target but also checks
+ the distribution tarball. The check is made by unpacking the tarball to a new
+ directory, configuring it, building it, installing it, and then verifying that
+ the installation results are correct (by comparing to the original build).
+ This target can take a long time to run but should be done before a release
+ goes out to make sure that the distributed tarball can actually be built into
+ a working release.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="dist-clean">dist-clean</a></div>
+<div class="doc_text">
+ <p>This is a special form of the <tt>clean</tt> clean target. It performs a
+ normal <tt>clean</tt> but also removes things pertaining to building the
+ distribution.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="install">install</a></div>
+<div class="doc_text">
+ <p>This target finalizes shared objects and executables and copies all
+ libraries, headers, executables and documentation to the directory given
+ with the <tt>--prefix</tt> option to <tt>configure</tt>. When completed,
+ the prefix directory will have everything needed to <b>use</b> LLVM. </p>
+ <p>The LLVM makefiles can generate complete <b>internal</b> documentation
+ for all the classes by using <tt>doxygen</tt>. By default, this feature is
+ <b>not</b> enabled because it takes a long time and generates a massive
+ amount of data (>100MB). If you want this feature, you must configure LLVM
+ with the --enable-doxygen switch and ensure that a modern version of doxygen
+ (1.3.7 or later) is available in your <tt>PATH</tt>. You can download
+ doxygen from
+ <a href="http://www.stack.nl/~dimitri/doxygen/download.html#latestsrc">
+ here</a>.
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="preconditions">preconditions</a></div>
+<div class="doc_text">
+ <p>This utility target checks to see if the <tt>Makefile</tt> in the object
+ directory is older than the <tt>Makefile</tt> in the source directory and
+ copies it if so. It also reruns the <tt>configure</tt> script if that needs to
+ be done and rebuilds the <tt>Makefile.config</tt> file similarly. Users may
+ overload this target to ensure that sanity checks are run <em>before</em> any
+ building of targets as all the targets depend on <tt>preconditions</tt>.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="printvars">printvars</a></div>
+<div class="doc_text">
+ <p>This utility target just causes the LLVM makefiles to print out some of
+ the makefile variables so that you can double check how things are set. </p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="reconfigure">reconfigure</a></div>
+<div class="doc_text">
+ <p>This utility target will force a reconfigure of LLVM or your project. It
+ simply runs <tt>$(PROJ_OBJ_ROOT)/config.status --recheck</tt> to rerun the
+ configuration tests and rebuild the configured files. This isn't generally
+ useful as the makefiles will reconfigure themselves whenever its necessary.
+ </p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="spotless">spotless</a></div>
+<div class="doc_text">
+ <p>This utility target, only available when <tt>$(PROJ_OBJ_ROOT)</tt> is not
+ the same as <tt>$(PROJ_SRC_ROOT)</tt>, will completely clean the
+ <tt>$(PROJ_OBJ_ROOT)</tt> directory by removing its content entirely and
+ reconfiguring the directory. This returns the <tt>$(PROJ_OBJ_ROOT)</tt>
+ directory to a completely fresh state. All content in the directory except
+ configured files and top-level makefiles will be lost.</p>
+ <div class="doc_warning"><p>Use with caution.</p></div>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="tags">tags</a></div>
+<div class="doc_text">
+ <p>This target will generate a <tt>TAGS</tt> file in the top-level source
+ directory. It is meant for use with emacs, XEmacs, or ViM. The TAGS file
+ provides an index of symbol definitions so that the editor can jump you to the
+ definition quickly. </p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="uninstall">uninstall</a></div>
+<div class="doc_text">
+ <p>This target is the opposite of the <tt>install</tt> target. It removes the
+ header, library and executable files from the installation directories. Note
+ that the directories themselves are not removed because it is not guaranteed
+ that LLVM is the only thing installing there (e.g. --prefix=/usr).</p>
+</div>
+
+<!-- *********************************************************************** -->
+<div class="doc_section"><a name="variables">Variables</a></div>
+<!-- *********************************************************************** -->
+<div class="doc_text">
+ <p>Variables are used to tell the LLVM Makefile System what to do and to
+ obtain information from it. Variables are also used internally by the LLVM
+ Makefile System. Variable names that contain only the upper case alphabetic
+ letters and underscore are intended for use by the end user. All other
+ variables are internal to the LLVM Makefile System and should not be relied
+ upon nor modified. The sections below describe how to use the LLVM Makefile
+ variables.</p>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="setvars">Control Variables</a></div>
+<div class="doc_text">
+ <p>Variables listed in the table below should be set <em>before</em> the
+ inclusion of <a href="#Makefile.common"><tt>$(LEVEL)/Makefile.common</tt></a>.
+ These variables provide input to the LLVM make system that tell it what to do
+ for the current directory.</p>
+ <dl>
+ <dt><a name="BUILD_ARCHIVE"><tt>BUILD_ARCHIVE</tt></a></dt>
+ <dd>If set to any value, causes an archive (.a) library to be built.</dd>
+ <dt><a name="BUILT_SOURCES"><tt>BUILT_SOURCES</tt></a></dt>
+ <dd>Specifies a set of source files that are generated from other source
+ files. These sources will be built before any other target processing to
+ ensure they are present.</dd>
+ <dt><a name="BYTECODE_LIBRARY"><tt>BYTECODE_LIBRARY</tt></a></dt>
+ <dd>If set to any value, causes a bitcode library (.bc) to be built.</dd>
+ <dt><a name="CONFIG_FILES"><tt>CONFIG_FILES</tt></a></dt>
+ <dd>Specifies a set of configuration files to be installed.</dd>
+ <dt><a name="DIRS"><tt>DIRS</tt></a></dt>
+ <dd>Specifies a set of directories, usually children of the current
+ directory, that should also be made using the same goal. These directories
+ will be built serially.</dd>
+ <dt><a name="DISABLE_AUTO_DEPENDENCIES"><tt>DISABLE_AUTO_DEPENDENCIES</tt></a></dt>
+ <dd>If set to any value, causes the makefiles to <b>not</b> automatically
+ generate dependencies when running the compiler. Use of this feature is
+ discouraged and it may be removed at a later date.</dd>
+ <dt><a name="DONT_BUILD_RELINKED"><tt>DONT_BUILD_RELINKED</tt></a></dt>
+ <dd>If set to any value, causes a relinked library (.o) not to be built. By
+ default, libraries are built as re-linked since most LLVM libraries are
+ needed in their entirety and re-linked libraries will be linked more quickly
+ than equivalent archive libraries.</dd>
+ <dt><a name="ENABLE_OPTIMIZED"><tt>ENABLE_OPTIMIZED</tt></a></dt>
+ <dd>If set to any value, causes the build to generate optimized objects,
+ libraries and executables. This alters the flags specified to the compilers
+ and linkers. Generally debugging won't be a fun experience with an optimized
+ build.</dd>
+ <dt><a name="ENABLE_PROFILING"><tt>ENABLE_PROFILING</tt></a></dt>
+ <dd>If set to any value, causes the build to generate both optimized and
+ profiled objects, libraries and executables. This alters the flags specified
+ to the compilers and linkers to ensure that profile data can be collected
+ from the tools built. Use the <tt>gprof</tt> tool to analyze the output from
+ the profiled tools (<tt>gmon.out</tt>).</dd>
+ <dt><a name="DISABLE_ASSERTIONS"><tt>DISABLE_ASSERTIONS</tt></a></dt>
+ <dd>If set to any value, causes the build to disable assertions, even if
+ building a release or profile build. This will exclude all assertion check
+ code from the build. LLVM will execute faster, but with little help when
+ things go wrong.</dd>
+ <dt><a name="EXPERIMENTAL_DIRS"><tt>EXPERIMENTAL_DIRS</tt></a></dt>
+ <dd>Specify a set of directories that should be built, but if they fail, it
+ should not cause the build to fail. Note that this should only be used
+ temporarily while code is being written.</dd>
+ <dt><a name="EXPORTED_SYMBOL_FILE"><tt>EXPORTED_SYMBOL_FILE</tt></a></dt>
+ <dd>Specifies the name of a single file that contains a list of the
+ symbols to be exported by the linker. One symbol per line.</dd>
+ <dt><a name="EXPORTED_SYMBOL_LIST"><tt>EXPORTED_SYMBOL_LIST</tt></a></dt>
+ <dd>Specifies a set of symbols to be exported by the linker.</dd>
+ <dt><a name="EXTRA_DIST"><tt>EXTRA_DIST</tt></a></dt>
+ <dd>Specifies additional files that should be distributed with LLVM. All
+ source files, all built sources, all Makefiles, and most documentation files
+ will be automatically distributed. Use this variable to distribute any
+ files that are not automatically distributed.</dd>
+ <dt><a name="KEEP_SYMBOLS"><tt>KEEP_SYMBOLS</tt></a></dt>
+ <dd>If set to any value, specifies that when linking executables the
+ makefiles should retain debug symbols in the executable. Normally, symbols
+ are stripped from the executable.</dd>
+ <dt><a name="LEVEL"><tt>LEVEL</tt></a><small>(required)</small></dt>
+ <dd>Specify the level of nesting from the top level. This variable must be
+ set in each makefile as it is used to find the top level and thus the other
+ makefiles.</dd>
+ <dt><a name="LIBRARYNAME"><tt>LIBRARYNAME</tt></a></dt>
+ <dd>Specify the name of the library to be built. (Required For
+ Libraries)</dd>
+ <dt><a name="LINK_COMPONENTS"><tt>LINK_COMPONENTS</tt></a></dt>
+ <dd>When specified for building a tool, the value of this variable will be
+ passed to the <tt>llvm-config</tt> tool to generate a link line for the
+ tool. Unlike <tt>USEDLIBS</tt> and <tt>LLVMLIBS</tt>, not all libraries need
+ to be specified. The <tt>llvm-config</tt> tool will figure out the library
+ dependencies and add any libraries that are needed. The <tt>USEDLIBS</tt>
+ variable can still be used in conjunction with <tt>LINK_COMPONENTS</tt> so
+ that additional project-specific libraries can be linked with the LLVM
+ libraries specified by <tt>LINK_COMPONENTS</tt></dd>
+ <dt><a name="LINK_LIBS_IN_SHARED"><tt>LINK_LIBS_IN_SHARED</tt></a></dt>
+ <dd>By default, shared library linking will ignore any libraries specified
+ with the <a href="LLVMLIBS">LLVMLIBS</a> or <a href="USEDLIBS">USEDLIBS</a>.
+ This prevents shared libs from including things that will be in the LLVM
+ tool the shared library will be loaded into. However, sometimes it is useful
+ to link certain libraries into your shared library and this option enables
+ that feature.</dd>
+ <dt><a name="LLVMLIBS"><tt>LLVMLIBS</tt></a></dt>
+ <dd>Specifies the set of libraries from the LLVM $(ObjDir) that will be
+ linked into the tool or library.</dd>
+ <dt><a name="LOADABLE_MODULE"><tt>LOADABLE_MODULE</tt></a></dt>
+ <dd>If set to any value, causes the shared library being built to also be
+ a loadable module. Loadable modules can be opened with the dlopen() function
+ and searched with dlsym (or the operating system's equivalent). Note that
+ setting this variable without also setting <tt>SHARED_LIBRARY</tt> will have
+ no effect.</dd>
+ <dt><a name="MODULE_NAME"><tt>MODULE_NAME</tt></a></dt>
+ <dd>Specifies the name of a bitcode module to be created. A bitcode
+ module can be specified in conjunction with other kinds of library builds
+ or by itself. It constructs from the sources a single linked bitcode
+ file.</dd>
+ <dt><a name="NO_INSTALL"><tt>NO_INSTALL</tt></a></dt>
+ <dd>Specifies that the build products of the directory should not be
+ installed but should be built even if the <tt>install</tt> target is given.
+ This is handy for directories that build libraries or tools that are only
+ used as part of the build process, such as code generators (e.g.
+ <tt>tblgen</tt>).</dd>
+ <dt><a name="OPTIONAL_DIRS"><tt>OPTIONAL_DIRS</tt></a></dt>
+ <dd>Specify a set of directories that may be built, if they exist, but its
+ not an error for them not to exist.</dd>
+ <dt><a name="PARALLEL_DIRS"><tt>PARALLEL_DIRS</tt></a></dt>
+ <dd>Specify a set of directories to build recursively and in parallel if
+ the -j option was used with <tt>make</tt>.</dd>
+ <dt><a name="SHARED_LIBRARY"><tt>SHARED_LIBRARY</tt></a></dt>
+ <dd>If set to any value, causes a shared library (.so) to be built in
+ addition to any other kinds of libraries. Note that this option will cause
+ all source files to be built twice: once with options for position
+ independent code and once without. Use it only where you really need a
+ shared library.</dd>
+ <dt><a name="SOURCES"><tt>SOURCES</tt><small>(optional)</small></a></dt>
+ <dd>Specifies the list of source files in the current directory to be
+ built. Source files of any type may be specified (programs, documentation,
+ config files, etc.). If not specified, the makefile system will infer the
+ set of source files from the files present in the current directory.</dd>
+ <dt><a name="SUFFIXES"><tt>SUFFIXES</tt></a></dt>
+ <dd>Specifies a set of filename suffixes that occur in suffix match rules.
+ Only set this if your local <tt>Makefile</tt> specifies additional suffix
+ match rules.</dd>
+ <dt><a name="TARGET"><tt>TARGET</tt></a></dt>
+ <dd>Specifies the name of the LLVM code generation target that the
+ current directory builds. Setting this variable enables additional rules to
+ build <tt>.inc</tt> files from <tt>.td</tt> files. </dd>
+ <dt><a name="TESTSUITE"><tt>TESTSUITE</tt></a></dt>
+ <dd>Specifies the directory of tests to run in <tt>llvm/test</tt>.</dd>
+ <dt><a name="TOOLNAME"><tt>TOOLNAME</tt></a></dt>
+ <dd>Specifies the name of the tool that the current directory should
+ build.</dd>
+ <dt><a name="TOOL_VERBOSE"><tt>TOOL_VERBOSE</tt></a></dt>
+ <dd>Implies VERBOSE and also tells each tool invoked to be verbose. This is
+ handy when you're trying to see the sub-tools invoked by each tool invoked
+ by the makefile. For example, this will pass <tt>-v</tt> to the GCC
+ compilers which causes it to print out the command lines it uses to invoke
+ sub-tools (compiler, assembler, linker).</dd>
+ <dt><a name="USEDLIBS"><tt>USEDLIBS</tt></a></dt>
+ <dd>Specifies the list of project libraries that will be linked into the
+ tool or library.</dd>
+ <dt><a name="VERBOSE"><tt>VERBOSE</tt></a></dt>
+ <dd>Tells the Makefile system to produce detailed output of what it is doing
+ instead of just summary comments. This will generate a LOT of output.</dd>
+ </dl>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="overvars">Override Variables</a></div>
+<div class="doc_text">
+ <p>Override variables can be used to override the default
+ values provided by the LLVM makefile system. These variables can be set in
+ several ways:</p>
+ <ul>
+ <li>In the environment (e.g. setenv, export) -- not recommended.</li>
+ <li>On the <tt>make</tt> command line -- recommended.</li>
+ <li>On the <tt>configure</tt> command line</li>
+ <li>In the Makefile (only <em>after</em> the inclusion of <a
+ href="#Makefile.common"><tt>$(LEVEL)/Makefile.common</tt></a>).</li>
+ </ul>
+ <p>The override variables are given below:</p>
+ <dl>
+ <dt><a name="AR"><tt>AR</tt></a> <small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>ar</tt> tool.</dd>
+ <dt><a name="BISON"><tt>BISON</tt></a><small>(configured)</small></dt>
+ <dd>Specifies the path to the <tt>bison</tt> tool.</dd>
+ <dt><a name="PROJ_OBJ_DIR"><tt>PROJ_OBJ_DIR</tt></a></dt>
+ <dd>The directory into which the products of build rules will be placed.
+ This might be the same as
+ <a href="#PROJ_SRC_DIR"><tt>PROJ_SRC_DIR</tt></a> but typically is
+ not.</dd>
+ <dt><a name="PROJ_SRC_DIR"><tt>PROJ_SRC_DIR</tt></a></dt>
+ <dd>The directory which contains the source files to be built.</dd>
+ <dt><a name="BZIP2"><tt>BZIP2</tt></a><small>(configured)</small></dt>
+ <dd>The path to the <tt>bzip2</tt> tool.</dd>
+ <dt><a name="CC"><tt>CC</tt></a><small>(configured)</small></dt>
+ <dd>The path to the 'C' compiler.</dd>
+ <dt><a name="CFLAGS"><tt>CFLAGS</tt></a></dt>
+ <dd>Additional flags to be passed to the 'C' compiler.</dd>
+ <dt><a name="CXX"><tt>CXX</tt></a></dt>
+ <dd>Specifies the path to the C++ compiler.</dd>
+ <dt><a name="CXXFLAGS"><tt>CXXFLAGS</tt></a></dt>
+ <dd>Additional flags to be passed to the C++ compiler.</dd>
+ <dt><a name="DATE"><tt>DATE<small>(configured)</small></tt></a></dt>
+ <dd>Specifies the path to the <tt>date</tt> program or any program that can
+ generate the current date and time on its standard output</dd>
+ <dt><a name="DOT"><tt>DOT</tt></a><small>(configured)</small></dt>
+ <dd>Specifies the path to the <tt>dot</tt> tool or <tt>false</tt> if there
+ isn't one.</dd>
+ <dt><a name="ECHO"><tt>ECHO</tt></a><small>(configured)</small></dt>
+ <dd>Specifies the path to the <tt>echo</tt> tool for printing output.</dd>
+ <dt><a name="ETAGS"><tt>ETAGS</tt></a><small>(configured)</small></dt>
+ <dd>Specifies the path to the <tt>etags</tt> tool.</dd>
+ <dt><a name="ETAGSFLAGS"><tt>ETAGSFLAGS</tt></a><small>(configured)</small>
+ </dt>
+ <dd>Provides flags to be passed to the <tt>etags</tt> tool.</dd>
+ <dt><a name="EXEEXT"><tt>EXEEXT</tt></a><small>(configured)</small></dt>
+ <dd>Provides the extension to be used on executables built by the makefiles.
+ The value may be empty on platforms that do not use file extensions for
+ executables (e.g. Unix).</dd>
+ <dt><a name="FLEX"><tt>FLEX</tt></a><small>(configured)</small></dt>
+ <dd>Specifies the path to the <tt>flex</tt> tool.</dd>
+ <dt><a name="INSTALL"><tt>INSTALL</tt></a><small>(configured)</small></dt>
+ <dd>Specifies the path to the <tt>install</tt> tool.</dd>
+ <dt><a name="LDFLAGS"><tt>LDFLAGS</tt></a><small>(configured)</small></dt>
+ <dd>Allows users to specify additional flags to pass to the linker.</dd>
+ <dt><a name="LIBS"><tt>LIBS</tt></a><small>(configured)</small></dt>
+ <dd>The list of libraries that should be linked with each tool.</dd>
+ <dt><a name="LIBTOOL"><tt>LIBTOOL</tt></a><small>(configured)</small></dt>
+ <dd>Specifies the path to the <tt>libtool</tt> tool. This tool is renamed
+ <tt>mklib</tt> by the <tt>configure</tt> script and always located in the
+ <dt><a name="LLVMAS"><tt>LLVMAS</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>llvm-as</tt> tool.</dd>
+ <dt><a name="LLVMGCC"><tt>LLVMGCC</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the LLVM version of the GCC 'C' Compiler</dd>
+ <dt><a name="LLVMGXX"><tt>LLVMGXX</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the LLVM version of the GCC C++ Compiler</dd>
+ <dt><a name="LLVMLD"><tt>LLVMLD</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the LLVM bitcode linker tool</dd>
+ <dt><a name="LLVM_OBJ_ROOT"><tt>LLVM_OBJ_ROOT</tt></a><small>(configured)
+ </small></dt>
+ <dd>Specifies the top directory into which the output of the build is
+ placed.</dd>
+ <dt><a name="LLVM_SRC_ROOT"><tt>LLVM_SRC_ROOT</tt></a><small>(configured)
+ </small></dt>
+ <dd>Specifies the top directory in which the sources are found.</dd>
+ <dt><a name="LLVM_TARBALL_NAME"><tt>LLVM_TARBALL_NAME</tt></a>
+ <small>(configured)</small></dt>
+ <dd>Specifies the name of the distribution tarball to create. This is
+ configured from the name of the project and its version number.</dd>
+ <dt><a name="MKDIR"><tt>MKDIR</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>mkdir</tt> tool that creates
+ directories.</dd>
+ <dt><a name="PLATFORMSTRIPOPTS"><tt>PLATFORMSTRIPOPTS</tt></a></dt>
+ <dd>The options to provide to the linker to specify that a stripped (no
+ symbols) executable should be built.</dd>
+ <dt><a name="RANLIB"><tt>RANLIB</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>ranlib</tt> tool.</dd>
+ <dt><a name="RM"><tt>RM</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>rm</tt> tool.</dd>
+ <dt><a name="SED"><tt>SED</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>sed</tt> tool.</dd>
+ <dt><a name="SHLIBEXT"><tt>SHLIBEXT</tt></a><small>(configured)</small></dt>
+ <dd>Provides the filename extension to use for shared libraries.</dd>
+ <dt><a name="TBLGEN"><tt>TBLGEN</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>tblgen</tt> tool.</dd>
+ <dt><a name="TAR"><tt>TAR</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>tar</tt> tool.</dd>
+ <dt><a name="ZIP"><tt>ZIP</tt></a><small>(defaulted)</small></dt>
+ <dd>Specifies the path to the <tt>zip</tt> tool.</dd>
+ </dl>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="getvars">Readable Variables</a></div>
+<div class="doc_text">
+ <p>Variables listed in the table below can be used by the user's Makefile but
+ should not be changed. Changing the value will generally cause the build to go
+ wrong, so don't do it.</p>
+ <dl>
+ <dt><a name="bindir"><tt>bindir</tt></a></dt>
+ <dd>The directory into which executables will ultimately be installed. This
+ value is derived from the <tt>--prefix</tt> option given to
+ <tt>configure</tt>.</dd>
+ <dt><a name="BuildMode"><tt>BuildMode</tt></a></dt>
+ <dd>The name of the type of build being performed: Debug, Release, or
+ Profile</dd>
+ <dt><a name="bitcode_libdir"><tt>bytecode_libdir</tt></a></dt>
+ <dd>The directory into which bitcode libraries will ultimately be
+ installed. This value is derived from the <tt>--prefix</tt> option given to
+ <tt>configure</tt>.</dd>
+ <dt><a name="ConfigureScriptFLAGS"><tt>ConfigureScriptFLAGS</tt></a></dt>
+ <dd>Additional flags given to the <tt>configure</tt> script when
+ reconfiguring.</dd>
+ <dt><a name="DistDir"><tt>DistDir</tt></a></dt>
+ <dd>The <em>current</em> directory for which a distribution copy is being
+ made.</dd>
+ <dt><a name="Echo"><tt>Echo</tt></a></dt>
+ <dd>The LLVM Makefile System output command. This provides the
+ <tt>llvm[n]</tt> prefix and starts with @ so the command itself is not
+ printed by <tt>make</tt>.</dd>
+ <dt><a name="EchoCmd"><tt>EchoCmd</tt></a></dt>
+ <dd> Same as <a href="#Echo"><tt>Echo</tt></a> but without the leading @.
+ </dd>
+ <dt><a name="includedir"><tt>includedir</tt></a></dt>
+ <dd>The directory into which include files will ultimately be installed.
+ This value is derived from the <tt>--prefix</tt> option given to
+ <tt>configure</tt>.</dd>
+ <dt><a name="libdir"><tt>libdir</tt></a></dt><dd></dd>
+ <dd>The directory into which native libraries will ultimately be installed.
+ This value is derived from the <tt>--prefix</tt> option given to
+ <tt>configure</tt>.</dd>
+ <dt><a name="LibDir"><tt>LibDir</tt></a></dt>
+ <dd>The configuration specific directory into which libraries are placed
+ before installation.</dd>
+ <dt><a name="MakefileConfig"><tt>MakefileConfig</tt></a></dt>
+ <dd>Full path of the <tt>Makefile.config</tt> file.</dd>
+ <dt><a name="MakefileConfigIn"><tt>MakefileConfigIn</tt></a></dt>
+ <dd>Full path of the <tt>Makefile.config.in</tt> file.</dd>
+ <dt><a name="ObjDir"><tt>ObjDir</tt></a></dt>
+ <dd>The configuration and directory specific directory where build objects
+ (compilation results) are placed.</dd>
+ <dt><a name="SubDirs"><tt>SubDirs</tt></a></dt>
+ <dd>The complete list of sub-directories of the current directory as
+ specified by other variables.</dd>
+ <dt><a name="Sources"><tt>Sources</tt></a></dt>
+ <dd>The complete list of source files.</dd>
+ <dt><a name="sysconfdir"><tt>sysconfdir</tt></a></dt>
+ <dd>The directory into which configuration files will ultimately be
+ installed. This value is derived from the <tt>--prefix</tt> option given to
+ <tt>configure</tt>.</dd>
+ <dt><a name="ToolDir"><tt>ToolDir</tt></a></dt>
+ <dd>The configuration specific directory into which executables are placed
+ before they are installed.</dd>
+ <dt><a name="TopDistDir"><tt>TopDistDir</tt></a></dt>
+ <dd>The top most directory into which the distribution files are copied.
+ </dd>
+ <dt><a name="Verb"><tt>Verb</tt></a></dt>
+ <dd>Use this as the first thing on your build script lines to enable or
+ disable verbose mode. It expands to either an @ (quiet mode) or nothing
+ (verbose mode). </dd>
+ </dl>
+</div>
+
+<!-- ======================================================================= -->
+<div class="doc_subsection"><a name="intvars">Internal Variables</a></div>
+<div class="doc_text">
+ <p>Variables listed below are used by the LLVM Makefile System
+ and considered internal. You should not use these variables under any
+ circumstances.</p>
+ <p><tt>
+ Archive
+ AR.Flags
+ BaseNameSources
+ BCCompile.C
+ BCCompile.CXX
+ BCLinkLib
+ C.Flags
+ Compile.C
+ CompileCommonOpts
+ Compile.CXX
+ ConfigStatusScript
+ ConfigureScript
+ CPP.Flags
+ CPP.Flags
+ CXX.Flags
+ DependFiles
+ DestArchiveLib
+ DestBitcodeLib
+ DestModule
+ DestRelinkedLib
+ DestSharedLib
+ DestTool
+ DistAlways
+ DistCheckDir
+ DistCheckTop
+ DistFiles
+ DistName
+ DistOther
+ DistSources
+ DistSubDirs
+ DistTarBZ2
+ DistTarGZip
+ DistZip
+ ExtraLibs
+ FakeSources
+ INCFiles
+ InternalTargets
+ LD.Flags
+ LexFiles
+ LexOutput
+ LibName.A
+ LibName.BC
+ LibName.LA
+ LibName.O
+ LibTool.Flags
+ Link
+ LinkModule
+ LLVMLibDir
+ LLVMLibsOptions
+ LLVMLibsPaths
+ LLVMToolDir
+ LLVMUsedLibs
+ LocalTargets
+ LTCompile.C
+ LTCompile.CXX
+ LTInstall
+ Module
+ ObjectsBC
+ ObjectsLO
+ ObjectsO
+ ObjMakefiles
+ ParallelTargets
+ PreConditions
+ ProjLibsOptions
+ ProjLibsPaths
+ ProjUsedLibs
+ Ranlib
+ RecursiveTargets
+ Relink
+ SrcMakefiles
+ Strip
+ StripWarnMsg
+ TableGen
+ TDFiles
+ ToolBuildPath
+ TopLevelTargets
+ UserTargets
+ YaccFiles
+ YaccOutput
+ </tt></p>
+</div>
+
+<!-- *********************************************************************** -->
+<hr>
+<address>
+ <a href="http://jigsaw.w3.org/css-validator/check/referer"><img
+ src="http://jigsaw.w3.org/css-validator/images/vcss" alt="Valid CSS!"></a>
+ <a href="http://validator.w3.org/check/referer"><img
+ src="http://www.w3.org/Icons/valid-html401" alt="Valid HTML 4.01!" /></a>
+
+ <a href="mailto:rspencer@x10sys.com">Reid Spencer</a><br>
+ <a href="http://llvm.org">The LLVM Compiler Infrastructure</a><br>
+ Last modified: $Date$
+</address>
+</body>
+</html>