| #===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# |
| # |
| # The LLVM Compiler Infrastructure |
| # |
| # This file is distributed under the University of Illinois Open Source |
| # License. See LICENSE.TXT for details. |
| # |
| #===------------------------------------------------------------------------===# |
| # |
| # This file is included by Makefile.common. It defines paths and other |
| # values specific to a particular installation of LLVM. |
| # |
| #===------------------------------------------------------------------------===# |
| |
| # Define LLVM specific info and directories based on the autoconf variables |
| LLVMPackageName := @PACKAGE_TARNAME@ |
| LLVMVersion := @PACKAGE_VERSION@ |
| LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ |
| |
| ########################################################################### |
| # Directory Configuration |
| # This section of the Makefile determines what is where. To be |
| # specific, there are several locations that need to be defined: |
| # |
| # o LLVM_SRC_ROOT : The root directory of the LLVM source code. |
| # o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. |
| # |
| # o PROJ_SRC_DIR : The directory containing the code to build. |
| # o PROJ_SRC_ROOT : The root directory of the code to build. |
| # |
| # o PROJ_OBJ_DIR : The directory in which compiled code will be placed. |
| # o PROJ_OBJ_ROOT : The root directory in which compiled code is placed. |
| # |
| ########################################################################### |
| |
| PWD := @BINPWD@ |
| # Set the project name to LLVM if its not defined |
| ifndef PROJECT_NAME |
| PROJECT_NAME := $(LLVMPackageName) |
| endif |
| |
| # The macro below is expanded when 'realpath' is not built-in. |
| # Built-in 'realpath' is available on GNU Make 3.81. |
| realpath = $(shell cd $(1); $(PWD)) |
| |
| PROJ_OBJ_DIR := $(call realpath, .) |
| PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL)) |
| |
| CLANG_SRC_ROOT := @CLANG_SRC_ROOT@ |
| |
| ifeq ($(PROJECT_NAME),$(LLVMPackageName)) |
| LLVM_SRC_ROOT := $(call realpath, @abs_top_srcdir@) |
| LLVM_OBJ_ROOT := $(call realpath, @abs_top_builddir@) |
| PROJ_SRC_ROOT := $(LLVM_SRC_ROOT) |
| PROJ_SRC_DIR := $(LLVM_SRC_ROOT)$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)) |
| |
| ifneq ($(CLANG_SRC_ROOT),) |
| CLANG_SRC_ROOT:= $(call realpath, $(CLANG_SRC_ROOT)) |
| PROJ_SRC_DIR := $(patsubst $(LLVM_SRC_ROOT)/tools/clang%,$(CLANG_SRC_ROOT)%,$(PROJ_SRC_DIR)) |
| endif |
| |
| prefix := @prefix@ |
| PROJ_prefix := $(prefix) |
| program_prefix := @program_prefix@ |
| PROJ_VERSION := $(LLVMVersion) |
| else |
| ifndef PROJ_SRC_ROOT |
| $(error Projects must define PROJ_SRC_ROOT) |
| endif |
| ifndef PROJ_OBJ_ROOT |
| $(error Projects must define PROJ_OBJ_ROOT) |
| endif |
| ifndef PROJ_INSTALL_ROOT |
| $(error Projects must define PROJ_INSTALL_ROOT) |
| endif |
| ifndef LLVM_SRC_ROOT |
| $(error Projects must define LLVM_SRC_ROOT) |
| endif |
| ifndef LLVM_OBJ_ROOT |
| $(error Projects must define LLVM_OBJ_ROOT) |
| endif |
| PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR))) |
| prefix := $(PROJ_INSTALL_ROOT) |
| PROJ_prefix := $(prefix) |
| ifndef PROJ_VERSION |
| PROJ_VERSION := 1.0 |
| endif |
| endif |
| |
| INTERNAL_PREFIX := @INTERNAL_PREFIX@ |
| ifneq ($(INTERNAL_PREFIX),) |
| PROJ_internal_prefix := $(INTERNAL_PREFIX) |
| else |
| PROJ_internal_prefix := $(prefix) |
| endif |
| |
| PROJ_bindir := $(PROJ_prefix)/bin |
| PROJ_libdir := $(PROJ_prefix)/lib |
| PROJ_datadir := $(PROJ_prefix)/share |
| PROJ_docsdir := $(PROJ_prefix)/docs/llvm |
| PROJ_etcdir := $(PROJ_prefix)/etc/llvm |
| PROJ_includedir := $(PROJ_prefix)/include |
| PROJ_infodir := $(PROJ_prefix)/info |
| PROJ_mandir := $(PROJ_prefix)/share/man |
| |
| # Determine if we're on a unix type operating system |
| LLVM_ON_UNIX:=@LLVM_ON_UNIX@ |
| LLVM_ON_WIN32:=@LLVM_ON_WIN32@ |
| |
| # Host operating system for which LLVM will be run. |
| OS=@OS@ |
| HOST_OS=@HOST_OS@ |
| # Target operating system for which LLVM will compile for. |
| TARGET_OS=@TARGET_OS@ |
| |
| # Host hardware architecture |
| HOST_ARCH=@HOST_ARCH@ |
| # Target hardware architecture |
| ARCH=@ARCH@ |
| TARGET_NATIVE_ARCH := $(ARCH) |
| |
| # Indicates, whether we're cross-compiling LLVM or not |
| LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@ |
| |
| # Executable file extension for build platform (mainly for |
| # tablegen call if we're cross-compiling). |
| BUILD_EXEEXT=@BUILD_EXEEXT@ |
| |
| # Compilers for the build platflorm (mainly for tablegen |
| # call if we're cross-compiling). |
| BUILD_CC=@BUILD_CC@ |
| BUILD_CXX=@BUILD_CXX@ |
| |
| # Triple for configuring build tools when cross-compiling |
| BUILD_TRIPLE=@build@ |
| |
| # Target triple (cpu-vendor-os) which LLVM is compiled for |
| HOST_TRIPLE=@host@ |
| |
| # Target triple (cpu-vendor-os) for which we should generate code |
| TARGET_TRIPLE=@target@ |
| |
| # Extra options to compile LLVM with |
| EXTRA_OPTIONS=@EXTRA_OPTIONS@ |
| |
| # Extra options to link LLVM with |
| EXTRA_LD_OPTIONS=@EXTRA_LD_OPTIONS@ |
| |
| # Endian-ness of the target |
| ENDIAN=@ENDIAN@ |
| |
| # Path to the C++ compiler to use. This is an optional setting, which defaults |
| # to whatever your gmake defaults to. |
| CXX = @CXX@ |
| |
| # Path to the CC binary, which use used by testcases for native builds. |
| CC := @CC@ |
| |
| # Linker flags. |
| LDFLAGS+=@LDFLAGS@ |
| |
| # Path to the library archiver program. |
| AR_PATH = @AR@ |
| AR = @AR@ |
| |
| # Path to the nm program |
| NM_PATH = @NM@ |
| |
| # The pathnames of the programs we require to build |
| CMP := @CMP@ |
| CP := @CP@ |
| DATE := @DATE@ |
| FIND := @FIND@ |
| GREP := @GREP@ |
| INSTALL := @INSTALL@ |
| MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs |
| MV := @MV@ |
| RANLIB := @RANLIB@ |
| RM := @RM@ |
| SED := @SED@ |
| TAR := @TAR@ |
| PYTHON := @PYTHON@ |
| |
| # Paths to miscellaneous programs we hope are present but might not be |
| BZIP2 := @BZIP2@ |
| CAT := @CAT@ |
| DOT := @DOT@ |
| DOXYGEN := @DOXYGEN@ |
| GROFF := @GROFF@ |
| GZIPBIN := @GZIPBIN@ |
| OCAMLC := @OCAMLC@ |
| OCAMLOPT := @OCAMLOPT@ |
| OCAMLDEP := @OCAMLDEP@ |
| OCAMLDOC := @OCAMLDOC@ |
| GAS := @GAS@ |
| POD2HTML := @POD2HTML@ |
| POD2MAN := @POD2MAN@ |
| PDFROFF := @PDFROFF@ |
| ZIP := @ZIP@ |
| |
| HAVE_PTHREAD := @HAVE_PTHREAD@ |
| |
| LIBS := @LIBS@ |
| |
| # Targets that we should build |
| TARGETS_TO_BUILD=@TARGETS_TO_BUILD@ |
| |
| # Path to directory where object files should be stored during a build. |
| # Set OBJ_ROOT to "." if you do not want to use a separate place for |
| # object files. |
| OBJ_ROOT := . |
| |
| # What to pass as rpath flag to g++ |
| RPATH := @RPATH@ |
| |
| # What to pass as -rdynamic flag to g++ |
| RDYNAMIC := @RDYNAMIC@ |
| |
| # These are options that can either be enabled here, or can be enabled on the |
| # make command line (ie, make ENABLE_PROFILING=1): |
| |
| # When ENABLE_LIBCPP is enabled, LLVM uses libc++ by default to build. |
| #ENABLE_LIBCPP = 0 |
| ENABLE_LIBCPP = @ENABLE_LIBCPP@ |
| |
| # When ENABLE_CXX11 is enabled, LLVM uses c++11 mode by default to build. |
| ENABLE_CXX11 = @ENABLE_CXX11@ |
| |
| # When ENABLE_CLANG_ARCMT is enabled, clang will have ARCMigrationTool. |
| ENABLE_CLANG_ARCMT = @ENABLE_CLANG_ARCMT@ |
| |
| # When ENABLE_CLANG_REWRITER is enabled, clang will have Rewriter. |
| ENABLE_CLANG_REWRITER = @ENABLE_CLANG_REWRITER@ |
| |
| # When ENABLE_CLANG_STATIC_ANALYZER is enabled, clang will have StaticAnalyzer. |
| ENABLE_CLANG_STATIC_ANALYZER = @ENABLE_CLANG_STATIC_ANALYZER@ |
| |
| # When ENABLE_WERROR is enabled, we'll pass -Werror on the command line |
| ENABLE_WERROR = @ENABLE_WERROR@ |
| |
| # When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put |
| # into the "Release" directories. Otherwise, LLVM code is not optimized and |
| # output is put in the "Debug" directories. |
| #ENABLE_OPTIMIZED = 1 |
| @ENABLE_OPTIMIZED@ |
| |
| # When ENABLE_PROFILING is enabled, profile instrumentation is done |
| # and output is put into the "<Flavor>+Profile" directories, where |
| # <Flavor> is either Debug or Release depending on how other build |
| # flags are set. Otherwise, output is put in the <Flavor> |
| # directories. |
| #ENABLE_PROFILING = 1 |
| @ENABLE_PROFILING@ |
| |
| # When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will |
| # exclude assertion checks, otherwise they are included. |
| #DISABLE_ASSERTIONS = 1 |
| @DISABLE_ASSERTIONS@ |
| |
| # When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM |
| # code will include expensive checks, otherwise they are excluded. |
| #ENABLE_EXPENSIVE_CHECKS = 0 |
| @ENABLE_EXPENSIVE_CHECKS@ |
| |
| # When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug |
| # symbols. |
| #DEBUG_RUNTIME = 1 |
| @DEBUG_RUNTIME@ |
| |
| # When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug |
| # symbols. |
| #DEBUG_SYMBOLS = 1 |
| @DEBUG_SYMBOLS@ |
| |
| # When KEEP_SYMBOLS is enabled, installed executables will never have their |
| # symbols stripped. |
| #KEEP_SYMBOLS = 1 |
| @KEEP_SYMBOLS@ |
| |
| # The compiler flags to use for optimized builds. |
| OPTIMIZE_OPTION := @OPTIMIZE_OPTION@ |
| |
| # When ENABLE_PROFILING is enabled, the llvm source base is built with profile |
| # information to allow gprof to be used to get execution frequencies. |
| #ENABLE_PROFILING = 1 |
| |
| # When ENABLE_DOCS is disabled, docs/ will not be built. |
| ENABLE_DOCS = @ENABLE_DOCS@ |
| |
| # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built |
| ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ |
| |
| # Do we want to enable threads? |
| ENABLE_THREADS := @LLVM_ENABLE_THREADS@ |
| |
| # Do we want to build with position independent code? |
| ENABLE_PIC := @ENABLE_PIC@ |
| |
| # Do we want to build a shared library and link the tools with it? |
| ENABLE_SHARED := @ENABLE_SHARED@ |
| |
| # Do we want to link the stdc++ into a shared library? (Cygming) |
| ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@ |
| |
| # Use -fvisibility-inlines-hidden? |
| ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@ |
| |
| # Do we want to allow timestamping information into builds? |
| ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@ |
| |
| # This option tells the Makefiles to produce verbose output. |
| # It essentially prints the commands that make is executing |
| #VERBOSE = 1 |
| |
| # Enable JIT for this platform |
| TARGET_HAS_JIT = @TARGET_HAS_JIT@ |
| |
| # Environment variable to set to change the runtime shared library search path. |
| SHLIBPATH_VAR = @SHLIBPATH_VAR@ |
| |
| # Shared library extension for host platform. |
| SHLIBEXT = @SHLIBEXT@ |
| |
| # Executable file extension for host platform. |
| EXEEXT = @EXEEXT@ |
| |
| # Things we just assume are "there" |
| ECHO := echo |
| |
| # Get the options for causing archives to link all their content instead of |
| # just missing symbols, and the inverse of that. This is used for certain LLVM |
| # tools that permit loadable modules. It ensures that the LLVM symbols will be |
| # available to those loadable modules. |
| LINKALL := @LINKALL@ |
| NOLINKALL := @NOLINKALL@ |
| |
| # Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending |
| # on the check. |
| HUGE_VAL_SANITY = @HUGE_VAL_SANITY@ |
| |
| # Bindings that we should build |
| BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@ |
| ALL_BINDINGS := @ALL_BINDINGS@ |
| OCAML_LIBDIR := @OCAML_LIBDIR@ |
| |
| # When compiling under Mingw/Cygwin, executables such as tblgen |
| # expect Windows paths, whereas the build system uses Unix paths. |
| # The function SYSPATH transforms Unix paths into Windows paths. |
| ifneq (,$(findstring -mno-cygwin, $(CXX))) |
| SYSPATH = $(shell echo $(1) | cygpath -m -f -) |
| else |
| SYSPATH = $(1) |
| endif |
| |
| # Location of the plugin header file for gold. |
| BINUTILS_INCDIR := @BINUTILS_INCDIR@ |
| |
| # Optional flags supported by the compiler |
| # -Wno-missing-field-initializers |
| NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@ |
| # -Wno-variadic-macros |
| NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@ |
| # -Wcovered-switch-default |
| COVERED_SWITCH_DEFAULT = @COVERED_SWITCH_DEFAULT@ |
| # -Wno-uninitialized |
| NO_UNINITIALIZED = @NO_UNINITIALIZED@ |
| # -Wno-maybe-uninitialized |
| NO_MAYBE_UNINITIALIZED = @NO_MAYBE_UNINITIALIZED@ |
| # -Wno-nested-anon-types |
| NO_NESTED_ANON_TYPES = @NO_NESTED_ANON_TYPES@ |
| |
| # Was polly found in tools/polly? |
| LLVM_HAS_POLLY = @LLVM_HAS_POLLY@ |
| # Flags supported by the linker. |
| # bfd ld / gold --version-script=file |
| HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@ |
| |
| # Flags to control using libxml2 |
| LIBXML2_LIBS := @LIBXML2_LIBS@ |
| LIBXML2_INC := @LIBXML2_INC@ |
| |
| # Flags to control building support for Intel JIT Events API |
| USE_INTEL_JITEVENTS := @USE_INTEL_JITEVENTS@ |
| INTEL_JITEVENTS_INCDIR := @INTEL_JITEVENTS_INCDIR@ |
| INTEL_JITEVENTS_LIBDIR := @INTEL_JITEVENTS_LIBDIR@ |
| |
| # Flags to control building support for OProfile JIT API |
| USE_OPROFILE := @USE_OPROFILE@ |
| |
| ifeq ($(USE_INTEL_JITEVENTS), 1) |
| OPTIONAL_COMPONENTS += IntelJITEvents |
| endif |
| ifeq ($(USE_OPROFILE), 1) |
| OPTIONAL_COMPONENTS += OProfileJIT |
| endif |