Makefile.config.in - fp2-dev/platform/external/llvm - Gitiles

 #===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
 #
 #                     The LLVM Compiler Infrastructure
 #
 # This file was developed by the LLVM research group and is distributed under
 # the University of Illinois Open Source License. See LICENSE.TXT for details.
 #
 #===------------------------------------------------------------------------===#
 #
 # This file is included by Makefile.common.  It defines paths and other
 # values specific to a particular installation of LLVM.
 #
 #===------------------------------------------------------------------------===#

 # Target operating system for which LLVM will be compiled.
 OS=@OS@

 # Target hardware architecture
 ARCH=@ARCH@

 # Endian-ness of the target
 ENDIAN=@ENDIAN@

 # Path to the C++ compiler to use.  This is an optional setting, which defaults
 # to whatever your gmake defaults to.
 CXX = @CXX@

 # Path to the CC binary, which use used by testcases for native builds.
 CC := @CC@

 # Linker flags.
 LDFLAGS+=@LDFLAGS@

 # Libraries needed by tools
 TOOLLINKOPTS=@LIBS@

 # Path to the library archiver program.
 AR_PATH = @AR@

 # The pathnames of the Flex and Bison programs, respectively.
 YACC     = @YACC@
 BISON    = @BISON@
 FLEX     = @LEX@

 # Paths to miscellaneous programs.
 RPWD    = pwd
 SED     = sed
 RM      = rm
 ECHO    = echo
 MKDIR   = @abs_top_srcdir@/autoconf/mkinstalldirs
 DATE    = date
 MV      = mv
 INSTALL = @INSTALL@
 DOT     = @DOT@
 ETAGS   = @ETAGS@
 ETAGSFLAGS = @ETAGSFLAGS@

 # Determine the target for which LLVM should generate code.
 LLVMGCCARCH := @target@/3.4-llvm

 # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
 LCC1 = @LLVMCC1@
 LCC1XX = @LLVMCC1PLUS@

 # Path to directory where object files should be stored during a build.
 # Set OBJ_ROOT to "." if you do not want to use a separate place for
 # object files.
 OBJ_ROOT := .

 # Path to location for LLVM C/C++ front-end. You can modify this if you
 # want to override the value set by configure.
 LLVMGCCDIR := @LLVMGCCDIR@

 # When this variable is set to 1, programs in the llvm/test/Programs hierarchy
 # are not recompiled from source code.  Instead, the bytecode for the file is
 # pulled from the BYTECODE_REPOSITORY directory.  This can be useful when disk
 # space is limited or when you just don't want to spend time running the C
 # frontend.
 #USE_PRECOMPILED_BYTECODE := 1
 @UPB@

 # This path specifies the cannonical location of bytecode files for compiled
 # versions of the test/Programs/* programs.  This is used as the bytecode source
 # when USE_PRECOMPILED_BYTECODE is specified or when source code is not
 # available for the program (such as SPEC).
 BYTECODE_REPOSITORY := @BCR@

 # SPEC benchmarks:
 #	If these are set then run the SPEC benchmarks.
 #	You must provide the SPEC benchmarks on your own.
 @USE_SPEC2000@
 @USE_SPEC95@

 # Path to the SPEC benchmarks.
 SPEC2000_ROOT := @SPEC2000_ROOT@
 SPEC95_ROOT := @SPEC95_ROOT@

 # Path to the Povray source code.
 @USE_POVRAY@
 POVRAY_ROOT := @POVRAY_ROOT@

 # Path to the PAPI code.  This is used by the reoptimizer only.
 #PAPIDIR := /home/vadve/shared/papi-2.3.4.1
 PAPIDIR := @PAPIDIR@

 # These are options that can either be enabled here, or can be enabled on the
 # make command line (ie, make ENABLE_PROFILING=1):

 # When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
 # turned on, and Debug builds are turned off.
 #ENABLE_OPTIMIZED = 1
 @ENABLE_OPTIMIZED@

 # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
 # information to allow gprof to be used to get execution frequencies.
 #ENABLE_PROFILING = 1

 # This option tells the Makefiles to produce verbose output.
 # It essentially prints the commands that make is executing
 #VERBOSE = 1

 # Enable JIT for this platform
 @JIT@

 # Disable LLC diffs for testing.
 @DISABLE_LLC_DIFFS@

 # Shared library extension for this platform.
 SHLIBEXT = @SHLIBEXT@

 # Executable file extension for this platform.
 EXEEXT = @EXEEXT@

 ###########################################################################
 # Directory Configuration
 #	This section of the Makefile determines what is where.  To be
 #	specific, there are several locations that need to be defined:
 #
 #	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
 #	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
 #
 #	o BUILD_SRC_DIR  : The directory containing the code to build.
 #	o BUILD_SRC_ROOT : The root directory of the code to build.
 #
 #	o BUILD_OBJ_DIR  : The directory in which compiled code will be placed.
 #	o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
 #
 ###########################################################################

 # Set the object build directory.  By default, it is the current directory.
 ifndef BUILD_OBJ_DIR
 BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
 endif

 # Set the root of the object directory.
 ifndef BUILD_OBJ_ROOT
 BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
 endif

 # Set the source build directory.  That is almost always the current directory.
 ifndef BUILD_SRC_DIR
 BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
 endif

 # Set the source root directory.
 ifndef BUILD_SRC_ROOT
 BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@)
 endif

 # Set the LLVM object directory.
 ifndef LLVM_OBJ_ROOT
 ifdef LLVM_SRC_ROOT
 LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
 else
 LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT)
 endif
 endif

 # Set the LLVM source directory.
 # It is typically the root directory of what we're compiling now.
 ifndef LLVM_SRC_ROOT
 LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
 endif

 # Set SourceDir for backwards compatbility.
 ifndef SourceDir
 SourceDir=$(BUILD_SRC_DIR)
 endif

 # Installation directories, as provided by the configure script.
 exec_prefix = @exec_prefix@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 bindir = @bindir@
 sbindir = @sbindir@
 libexecdir = @libexecdir@
 datadir = @datadir@
 sysconfdir = @sysconfdir@
 sharedstatedir = @sharedstatedir@
 localstatedir = @localstatedir@
 libdir = @libdir@
 bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs
 includedir = @includedir@
 infodir = @infodir@
 mandir = @mandir@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_DATA = @INSTALL_DATA@
	#===-- Makefile.config - Local configuration for LLVM ------- Makefile ---===#
	#
	# The LLVM Compiler Infrastructure
	#
	# This file was developed by the LLVM research group and is distributed under
	# the University of Illinois Open Source License. See LICENSE.TXT for details.
	#
	#===------------------------------------------------------------------------===#
	#
	# This file is included by Makefile.common. It defines paths and other
	# values specific to a particular installation of LLVM.
	#
	#===------------------------------------------------------------------------===#

	# Target operating system for which LLVM will be compiled.
	OS=@OS@

	# Target hardware architecture
	ARCH=@ARCH@

	# Endian-ness of the target
	ENDIAN=@ENDIAN@

	# Path to the C++ compiler to use. This is an optional setting, which defaults
	# to whatever your gmake defaults to.
	CXX = @CXX@

	# Path to the CC binary, which use used by testcases for native builds.
	CC := @CC@

	# Linker flags.
	LDFLAGS+=@LDFLAGS@

	# Libraries needed by tools
	TOOLLINKOPTS=@LIBS@

	# Path to the library archiver program.
	AR_PATH = @AR@

	# The pathnames of the Flex and Bison programs, respectively.
	YACC = @YACC@
	BISON = @BISON@
	FLEX = @LEX@

	# Paths to miscellaneous programs.
	RPWD = pwd
	SED = sed
	RM = rm
	ECHO = echo
	MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs
	DATE = date
	MV = mv
	INSTALL = @INSTALL@
	DOT = @DOT@
	ETAGS = @ETAGS@
	ETAGSFLAGS = @ETAGSFLAGS@

	# Determine the target for which LLVM should generate code.
	LLVMGCCARCH := @target@/3.4-llvm

	# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
	LCC1 = @LLVMCC1@
	LCC1XX = @LLVMCC1PLUS@

	# Path to directory where object files should be stored during a build.
	# Set OBJ_ROOT to "." if you do not want to use a separate place for
	# object files.
	OBJ_ROOT := .

	# Path to location for LLVM C/C++ front-end. You can modify this if you
	# want to override the value set by configure.
	LLVMGCCDIR := @LLVMGCCDIR@

	# When this variable is set to 1, programs in the llvm/test/Programs hierarchy
	# are not recompiled from source code. Instead, the bytecode for the file is
	# pulled from the BYTECODE_REPOSITORY directory. This can be useful when disk
	# space is limited or when you just don't want to spend time running the C
	# frontend.
	#USE_PRECOMPILED_BYTECODE := 1
	@UPB@

	# This path specifies the cannonical location of bytecode files for compiled
	# versions of the test/Programs/* programs. This is used as the bytecode source
	# when USE_PRECOMPILED_BYTECODE is specified or when source code is not
	# available for the program (such as SPEC).
	BYTECODE_REPOSITORY := @BCR@

	# SPEC benchmarks:
	# If these are set then run the SPEC benchmarks.
	# You must provide the SPEC benchmarks on your own.
	@USE_SPEC2000@
	@USE_SPEC95@

	# Path to the SPEC benchmarks.
	SPEC2000_ROOT := @SPEC2000_ROOT@
	SPEC95_ROOT := @SPEC95_ROOT@

	# Path to the Povray source code.
	@USE_POVRAY@
	POVRAY_ROOT := @POVRAY_ROOT@

	# Path to the PAPI code. This is used by the reoptimizer only.
	#PAPIDIR := /home/vadve/shared/papi-2.3.4.1
	PAPIDIR := @PAPIDIR@

	# These are options that can either be enabled here, or can be enabled on the
	# make command line (ie, make ENABLE_PROFILING=1):

	# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
	# turned on, and Debug builds are turned off.
	#ENABLE_OPTIMIZED = 1
	@ENABLE_OPTIMIZED@

	# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
	# information to allow gprof to be used to get execution frequencies.
	#ENABLE_PROFILING = 1

	# This option tells the Makefiles to produce verbose output.
	# It essentially prints the commands that make is executing
	#VERBOSE = 1

	# Enable JIT for this platform
	@JIT@

	# Disable LLC diffs for testing.
	@DISABLE_LLC_DIFFS@

	# Shared library extension for this platform.
	SHLIBEXT = @SHLIBEXT@

	# Executable file extension for this platform.
	EXEEXT = @EXEEXT@

	###########################################################################
	# Directory Configuration
	# This section of the Makefile determines what is where. To be
	# specific, there are several locations that need to be defined:
	#
	# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
	# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
	#
	# o BUILD_SRC_DIR : The directory containing the code to build.
	# o BUILD_SRC_ROOT : The root directory of the code to build.
	#
	# o BUILD_OBJ_DIR : The directory in which compiled code will be placed.
	# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
	#
	###########################################################################

	# Set the object build directory. By default, it is the current directory.
	ifndef BUILD_OBJ_DIR
	BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
	endif

	# Set the root of the object directory.
	ifndef BUILD_OBJ_ROOT
	BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
	endif

	# Set the source build directory. That is almost always the current directory.
	ifndef BUILD_SRC_DIR
	BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
	endif

	# Set the source root directory.
	ifndef BUILD_SRC_ROOT
	BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@)
	endif

	# Set the LLVM object directory.
	ifndef LLVM_OBJ_ROOT
	ifdef LLVM_SRC_ROOT
	LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
	else
	LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT)
	endif
	endif

	# Set the LLVM source directory.
	# It is typically the root directory of what we're compiling now.
	ifndef LLVM_SRC_ROOT
	LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
	endif

	# Set SourceDir for backwards compatbility.
	ifndef SourceDir
	SourceDir=$(BUILD_SRC_DIR)
	endif

	# Installation directories, as provided by the configure script.
	exec_prefix = @exec_prefix@
	prefix = @prefix@
	program_transform_name = @program_transform_name@
	bindir = @bindir@
	sbindir = @sbindir@
	libexecdir = @libexecdir@
	datadir = @datadir@
	sysconfdir = @sysconfdir@
	sharedstatedir = @sharedstatedir@
	localstatedir = @localstatedir@
	libdir = @libdir@
	bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs
	includedir = @includedir@
	infodir = @infodir@
	mandir = @mandir@
	INSTALL_PROGRAM = @INSTALL_PROGRAM@
	INSTALL_SCRIPT = @INSTALL_SCRIPT@
	INSTALL_DATA = @INSTALL_DATA@