- 37ed9c1 Update aosp/master LLVM for rebase to r222494. by Stephen Hines · 10 years ago
- 36b5688 Update to LLVM 3.5a. by Stephen Hines · 10 years ago
- 6a971bb Revert "Revert "Windows: Add support for unicode command lines"" by David Majnemer · 11 years ago
- b262556 Revert "Windows: Add support for unicode command lines" by David Majnemer · 11 years ago
- 5a1a185 Windows: Add support for unicode command lines by David Majnemer · 11 years ago
- fd1b799 Disable libc++ building by default with CMake with MSVC -- some bots by Chandler Carruth · 11 years ago
- 2f101e8 Enable libcxx as part of the top level CMake build when it is checked by Chandler Carruth · 11 years ago
- 8525fad Port the detection of zlib from the main autoconf system to the sample by Chandler Carruth · 11 years ago
- 8e9fde1 Add support for linking librt and using clock_gettime to the sample by Chandler Carruth · 11 years ago
- b5d5797 Update the sample project autoconf setup to include support for by Chandler Carruth · 11 years ago
- 0cffe07 Build with the $RDYNAMIC flag on Darwin as well as other platforms. by Bob Wilson · 11 years ago
- f3289e7 Regenerate with changes for -rdynamic. by Bob Wilson · 11 years ago
- 244acf3 Link with -rdynamic instead of -Wl,-export-dynamic. by Bob Wilson · 11 years ago
- f38cc38 [PowerPC] Support powerpc64le as a syntax-checking target. by Bill Schmidt · 11 years ago
- 1a9e248 Remove dead code from the makefile build system. by Rafael Espindola · 11 years ago
- 6fccaaf Remove the mblaze backend from llvm. by Rafael Espindola · 11 years ago
- ba62f2f The build system is currently miss-identifying GNU/kFreeBSD as FreeBSD. by Sylvestre Ledru · 11 years ago
- d77a0ca Filter out dragonegg when checked out into a projects subdirectory. by Chandler Carruth · 11 years ago
- ba30d60 Don't define LTDL_SHLIBPATH_VAR. by Rafael Espindola · 11 years ago
- add4c2f Don't define LLVM_LIBDIR, it is not used anymore. by Rafael Espindola · 11 years ago
- d34c405 sync projects/sample's autohell. by Rafael Espindola · 11 years ago
- 9887cbe by Ulrich Weigand · 11 years ago
- 735ab83 by Ulrich Weigand · 11 years ago
- 8e46da2 remove cbe backend from sample configure by Jia Liu · 11 years ago
- 5c4e836 Print a warning message if compiler-rt can't be built because of old CMake version to make this requirement more visible to users by Alexey Samsonov · 11 years ago
- cdb0a58 Set the deployment target for Apple llvmCore builds. <rdar://problem/12712431> by Bob Wilson · 11 years ago
- 72062f5 Add AArch64 as an experimental target. by Tim Northover · 11 years ago
- 3ef8b0a build: add --with-python option by Saleem Abdulrasool · 11 years ago
- 183797e Clean up the sample include orderings, not that it really matters... by Chandler Carruth · 12 years ago
- 1c689f7 Add ENABLE_CXX11 and ENABLE_WERROR to Makefile.llvm.rules for sample project. They were previously added to Makefile.llvm.config.in but the consumption was missing by Craig Topper · 12 years ago
- 1a35292 Few more small CellSPU removals. by Eric Christopher · 12 years ago
- 8ee3963 Add --enable-werror and --enable-cxx11 to projects/sample/ by Craig Topper · 12 years ago
- 4830ccf Add mips64-* and mips64el-* triples to configure scripts by Simon Atanasyan · 12 years ago
- 0ed9b8e [CMake] Introduce LLVM_EXTERNAL_COMPILER_RT_SOURCE_DIR. by NAKAMURA Takumi · 12 years ago
- 9208052 Re-enable support for --program-prefix. by Jordan Rose · 12 years ago
- 94c2271 Revert 'Fix a typo 'iff' => 'if''. iff is an abreviation of if and only if. See: http://en.wikipedia.org/wiki/If_and_only_if Commit 164767 by Sylvestre Ledru · 12 years ago
- 7e2c793 Fix a typo 'iff' => 'if' by Sylvestre Ledru · 12 years ago
- 85042e6 Revert "Add --program-prefix support to build" by Jordan Rose · 12 years ago
- ba48ceb Add --program-prefix support to build by Sebastian Pop · 12 years ago
- 0543c14 [CMake] Respect LLVM_BUILD_RUNTIME. by Michael J. Spencer · 12 years ago
- d9f3dd9 Enable recursing into the compiler-rt projcet with the CMake build. by Chandler Carruth · 12 years ago
- c8e41c5 Fix a typo (the the => the) by Sylvestre Ledru · 12 years ago
- 38cda13 Revert "Build script changes for R600/SI Codegen v6" by Tom Stellard · 12 years ago
- a93c8a8 Build script changes for R600/SI Codegen v6 by Tom Stellard · 12 years ago
- c1a0af1 Remove 'check-dg', a wrapper around 'check-local-dg' which was just nuked. by Chandler Carruth · 12 years ago
- 01e4a06 Remove autoconf support for runtest and tclsh, some of the last vestigal by Chandler Carruth · 12 years ago
- eb2dea2 Exclude both libcxx and compiler-rt until we get their CMake builds by Chandler Carruth · 12 years ago
- 0fad48f Add mipsel-* to the list of targets recognized by configure script. by Simon Atanasyan · 12 years ago
- 42a0b48 Remove the PTX back-end and all of its artifacts (triple, etc.) by Justin Holewinski · 12 years ago
- 0017180 Update all outdated autoconf files in the sample project. by Benjamin Kramer · 12 years ago
- 49683f3 This patch adds a new NVPTX back-end to LLVM which supports code generation for NVIDIA PTX 3.0. This back-end will (eventually) replace the current PTX back-end, while maintaining compatibility with it. by Justin Holewinski · 12 years ago
- c84f975 Update config.sub in the sample project. by Evgeniy Stepanov · 12 years ago
- 7533809 Remove llvm-ld and llvm-stub (which is only used by llvm-ld). by Michael J. Spencer · 12 years ago
- 703bf84 Fix a problem in the target detection for Debian GNU/HURD by Sylvestre Ledru · 12 years ago
- 1d7e8c6 Fix a problem in the target detection for Debian GNU/kFreeBSD by Sylvestre Ledru · 12 years ago
- c4b2271 Add InitializeNativeTargetDisassembler function. by Eric Christopher · 12 years ago
- b2bc6e4 Add some fixes to the configure script for isInf and add by Eric Christopher · 12 years ago
- a443e5b Remove the C backend. by Eric Christopher · 12 years ago
- 8c3d258 configure: Don't require a perl interpreter to be present, LLVM's buildsystem doesn't depend on perl anymore. by Benjamin Kramer · 12 years ago
- 9993a3a Enable -Wcovered-switch-default again, but add -Werror to the checks to make by Rafael Espindola · 12 years ago
- 3c2e5f2 Temporarily revert r151609, which enabled a new warning for LLVM and by Chandler Carruth · 12 years ago
- 33177f5 Enable -Wcovered-switch-default as it matches the switch style used in llvm. by Rafael Espindola · 12 years ago
- 1aee22e Replace the old --with-cxx-* configure options with a single --with-gcc-toolchain by Rafael Espindola · 12 years ago
- 48381e5 Regenerate configure. by Rafael Espindola · 12 years ago
- 6e9b5eb revert r147542 after comments from Joerg Sonnenberger by Sebastian Pop · 12 years ago
- 8a86887 use getHostTriple instead of getDefaultTargetTriple in getClosestTargetForJIT by Sebastian Pop · 12 years ago
- b4b5415 Hexagon backend support by Tony Linthicum · 13 years ago
- 4ab406d LLVMBuild: Remove trailing newline, which irked me. by Daniel Dunbar · 13 years ago
- a3a2dfd build: Add initial cut at LLVMBuild.txt files. by Daniel Dunbar · 13 years ago
- de2e0b5 rename LLVM_HOSTTRIPLE into LLVM_DEFAULT_TARGET_TRIPLE by Sebastian Pop · 13 years ago
- c4cbf4a derive LLVM_HOSTTRIPLE from target by Sebastian Pop · 13 years ago
- 33ba8b0 Remove the Alpha backend. by Dan Gohman · 13 years ago
- b42d476 projects/sample: Switch over to imported Makefile setup. by Daniel Dunbar · 13 years ago
- 360fa9a Handle newer cases for freebsd which is approaching 10.0 and not 1.0. by Eric Christopher · 13 years ago
- 3e6157d Remove the Blackfin backend. by Dan Gohman · 13 years ago
- 29074cc Remove the SystemZ backend. by Dan Gohman · 13 years ago
- bf79f91 Regenerate projects/sample/configure. by Daniel Dunbar · 13 years ago
- 2532fa2 projects/sample: Import adapted form of current LLVM autoconf/Makefile setup so that projects/sample is standalone and not tied to the LLVM build setup. by Daniel Dunbar · 13 years ago
- 7a2bdde Fix a ton of comment typos found by codespell. Patch by by Chris Lattner · 13 years ago
- 2bf4b54 Regen configure by Peter Collingbourne · 14 years ago
- 1fbf5a4 Fix paths; AutoRegen.sh changes its current working directory to be the by Peter Collingbourne · 14 years ago
- 3cc52ea I swear I did a make clean and make before committing all this... by Michael J. Spencer · 14 years ago
- 9b8cc2b projects: Don't try to build libcxx if one happens to have it checked out into by Daniel Dunbar · 14 years ago
- 31a0a43 Remove bogus link. by Eric Christopher · 14 years ago
- 04c528a Remove many calls to TII::isMoveInstr. Targets should be producing COPY anyway. by Jakob Stoklund Olesen · 14 years ago
- 15c4bb9 Testing subversion commit access by Wesley Peck · 14 years ago
- f681475 CMake: Fixed syntax in conditional. by Oscar Fuentes · 14 years ago
- 4b42a1e Oops. by Jakob Stoklund Olesen · 14 years ago
- 8addca2 clang test suite by Jakob Stoklund Olesen · 14 years ago
- 1f10929 Fix autoconf llvm srcdir location for generic projects. by Eric Christopher · 14 years ago
- 50a5aa1 CMake: Don't try to descend into projects/compiler-rt, it doesn't work. by Daniel Dunbar · 14 years ago
- d58816f Don't try to build compiler-rt if it happens to be checked out into projects/ by Daniel Dunbar · 14 years ago
- 8b67f77 Move DataTypes.h to include/llvm/System, update all users. This breaks the last by Chandler Carruth · 15 years ago
- 6493798 install-sh chmods to 0755 by default, and this causes 'git diff' to show by Torok Edwin · 15 years ago
- 929a493 remove dead makefile flags. by Chris Lattner · 15 years ago
- 324f608 Revert r67655 and r67656, as they are breaking the build. I'm by Dan Gohman · 15 years ago
- 2594706 LLVM's master Makefile.common is in LLVM_SRC_ROOT, not LLVM_OBJ_ROOT. by Dan Gohman · 15 years ago
- d02a281 Regenerate configure. by Dan Gohman · 15 years ago
- 497e863 Fix paths; AutoRegen.sh changes its current working directory to be the by Dan Gohman · 15 years ago
- c9ebae3 Update for autoconf 2.6x; by Dan Gohman · 15 years ago