blob: 4cfc59565733655b08dd75a20cc01edc5a65f31f [file] [log] [blame]
/*
* Copyright 2008, The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Binary implementation of the original opcontrol script due to missing tools
* like awk, test, etc.
*/
#include <unistd.h>
#include <getopt.h>
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <signal.h>
#include <sys/stat.h>
#include "op_config.h"
#define verbose(fmt...) if (verbose_print) printf(fmt)
/* Experiments found that using a small interval may hang the device, and the
* more events tracked simultaneously, the longer the interval has to be.
*/
#if defined(__i386__) || defined(__x86_64__)
#define MAX_EVENTS 2
int min_count[MAX_EVENTS] = {60000, 100000};
#elif !defined(WITH_ARM_V7_A)
#define MAX_EVENTS 3
int min_count[MAX_EVENTS] = {150000, 200000, 250000};
#else
#define MAX_EVENTS 5
int min_count[MAX_EVENTS] = {150000, 200000, 250000, 300000, 350000};
#endif
int verbose_print;
int list_events;
int show_usage;
int setup;
int quick;
int num_events;
int start;
int stop;
int reset;
int selected_events[MAX_EVENTS];
int selected_counts[MAX_EVENTS];
char callgraph[8];
char kernel_range[512];
char vmlinux[512];
struct option long_options[] = {
{"help", 0, &show_usage, 1},
{"list-events", 0, &list_events, 1},
{"reset", 0, &reset, 1},
{"setup", 0, &setup, 1},
{"quick", 0, &quick, 1},
{"callgraph", 1, 0, 'c'},
{"event", 1, 0, 'e'},
{"vmlinux", 1, 0, 'v'},
{"kernel-range", 1, 0, 'r'},
{"start", 0, &start, 1},
{"stop", 0, &stop, 1},
{"dump", 0, 0, 'd'},
{"shutdown", 0, 0, 'h'},
{"status", 0, 0, 't'},
{"verbose", 0, 0, 'V'},
{0, 0, 0, 0},
};
struct event_info {
int id;
int um;
const char *name;
const char *explanation;
} event_info[] = {
#if defined(__i386__) || defined(__x86_64__)
/* INTEL_ARCH_PERFMON events */
/* 0x3c counters:cpuid um:zero minimum:6000 filter:0 name:CPU_CLK_UNHALTED :
* Clock cycles when not halted
*/
{0x3c, 0, "CPU_CLK_UNHALTED",
"Clock cycles when not halted" },
/* event:0x3c counters:cpuid um:one minimum:6000 filter:2 name:UNHALTED_REFERENCE_CYCLES :
* Unhalted reference cycles
*/
{0x3c, 1, "UNHALTED_REFERENCE_CYCLES",
"Unhalted reference cycles" },
/* event:0xc0 counters:cpuid um:zero minimum:6000 filter:1 name:INST_RETIRED :
* number of instructions retired
*/
{0xc0, 0, "INST_RETIRED",
"number of instructions retired"},
/* event:0x2e counters:cpuid um:x41 minimum:6000 filter:5 name:LLC_MISSES :
* Last level cache demand requests from this core that missed the LLC
*/
{0x2e, 0x41, "LLC_MISSES",
"Last level cache demand requests from this core that missed the LLC"},
/* event:0x2e counters:cpuid um:x4f minimum:6000 filter:4 name:LLC_REFS :
* Last level cache demand requests from this core
*/
{0x2e, 0x4f, "LLC_REFS",
"Last level cache demand requests from this core"},
/* event:0xc4 counters:cpuid um:zero minimum:500 filter:6 name:BR_INST_RETIRED :
* number of branch instructions retired
*/
{0xc4, 0, "BR_INST_RETIRED",
"number of branch instructions retired"},
/* event:0xc5 counters:cpuid um:zero minimum:500 filter:7 name:BR_MISS_PRED_RETIRED :
* number of mispredicted branches retired (precise)
*/
{0xc5, 0, "BR_MISS_PRED_RETIRED",
"number of mispredicted branches retired (precise)"},
#elif !defined(WITH_ARM_V7_A)
/* ARM V6 events */
{0x00, 0, "IFU_IFETCH_MISS",
"number of instruction fetch misses"},
{0x01, 0, "CYCLES_IFU_MEM_STALL",
"cycles instruction fetch pipe is stalled"},
{0x02, 0, "CYCLES_DATA_STALL",
"cycles stall occurs for due to data dependency"},
{0x03, 0, "ITLB_MISS",
"number of Instruction MicroTLB misses"},
{0x04, 0, "DTLB_MISS",
"number of Data MicroTLB misses"},
{0x05, 0, "BR_INST_EXECUTED",
"branch instruction executed w/ or w/o program flow change"},
{0x06, 0, "BR_INST_MISS_PRED",
"branch mispredicted"},
{0x07, 0, "INSN_EXECUTED",
"instructions executed"},
{0x09, 0, "DCACHE_ACCESS",
"data cache access, cacheable locations"},
{0x0a, 0, "DCACHE_ACCESS_ALL",
"data cache access, all locations"},
{0x0b, 0, "DCACHE_MISS",
"data cache miss"},
{0x0c, 0, "DCACHE_WB",
"data cache writeback, 1 event for every half cacheline"},
{0x0d, 0, "PC_CHANGE",
"number of times the program counter was changed without a mode switch"},
{0x0f, 0, "TLB_MISS",
"Main TLB miss"},
{0x10, 0, "EXP_EXTERNAL",
"Explicit external data access"},
{0x11, 0, "LSU_STALL",
"cycles stalled because Load Store request queue is full"},
{0x12, 0, "WRITE_DRAIN",
"Times write buffer was drained"},
{0xff, 0, "CPU_CYCLES",
"clock cycles counter"},
#else
/* ARM V7 events */
{0x00, 0, "PMNC_SW_INCR",
"Software increment of PMNC registers"},
{0x01, 0, "IFETCH_MISS",
"Instruction fetch misses from cache or normal cacheable memory"},
{0x02, 0, "ITLB_MISS",
"Instruction fetch misses from TLB"},
{0x03, 0, "DCACHE_REFILL",
"Data R/W operation that causes a refill from cache or normal cacheable"
"memory"},
{0x04, 0, "DCACHE_ACCESS",
"Data R/W from cache"},
{0x05, 0, "DTLB_REFILL",
"Data R/W that causes a TLB refill"},
{0x06, 0, "DREAD",
"Data read architecturally executed (note: architecturally executed = for"
"instructions that are unconditional or that pass the condition code)"},
{0x07, 0, "DWRITE",
"Data write architecturally executed"},
{0x08, 0, "INSTR_EXECUTED",
"All executed instructions"},
{0x09, 0, "EXC_TAKEN",
"Exception taken"},
{0x0A, 0, "EXC_EXECUTED",
"Exception return architecturally executed"},
{0x0B, "CID_WRITE",
"Instruction that writes to the Context ID Register architecturally"
"executed"},
{0x0C, "PC_WRITE",
"SW change of PC, architecturally executed (not by exceptions)"},
{0x0D, "PC_IMM_BRANCH",
"Immediate branch instruction executed (taken or not)"},
{0x0E, "PC_PROC_RETURN",
"Procedure return architecturally executed (not by exceptions)"},
{0x0F, "UNALIGNED_ACCESS",
"Unaligned access architecturally executed"},
{0x10, "PC_BRANCH_MIS_PRED",
"Branch mispredicted or not predicted. Counts pipeline flushes because of"
"misprediction"},
{0x12, "PC_BRANCH_MIS_USED",
"Branch or change in program flow that could have been predicted"},
{0x40, "WRITE_BUFFER_FULL",
"Any write buffer full cycle"},
{0x41, "L2_STORE_MERGED",
"Any store that is merged in L2 cache"},
{0x42, "L2_STORE_BUFF",
"Any bufferable store from load/store to L2 cache"},
{0x43, "L2_ACCESS",
"Any access to L2 cache"},
{0x44, "L2_CACH_MISS",
"Any cacheable miss in L2 cache"},
{0x45, "AXI_READ_CYCLES",
"Number of cycles for an active AXI read"},
{0x46, "AXI_WRITE_CYCLES",
"Number of cycles for an active AXI write"},
{0x47, "MEMORY_REPLAY",
"Any replay event in the memory subsystem"},
{0x48, "UNALIGNED_ACCESS_REPLAY",
"Unaligned access that causes a replay"},
{0x49, "L1_DATA_MISS",
"L1 data cache miss as a result of the hashing algorithm"},
{0x4A, "L1_INST_MISS",
"L1 instruction cache miss as a result of the hashing algorithm"},
{0x4B, "L1_DATA_COLORING",
"L1 data access in which a page coloring alias occurs"},
{0x4C, "L1_NEON_DATA",
"NEON data access that hits L1 cache"},
{0x4D, "L1_NEON_CACH_DATA",
"NEON cacheable data access that hits L1 cache"},
{0x4E, "L2_NEON",
"L2 access as a result of NEON memory access"},
{0x4F, "L2_NEON_HIT",
"Any NEON hit in L2 cache"},
{0x50, "L1_INST",
"Any L1 instruction cache access, excluding CP15 cache accesses"},
{0x51, "PC_RETURN_MIS_PRED",
"Return stack misprediction at return stack pop"
"(incorrect target address)"},
{0x52, "PC_BRANCH_FAILED",
"Branch prediction misprediction"},
{0x53, "PC_BRANCH_TAKEN",
"Any predicted branch that is taken"},
{0x54, "PC_BRANCH_EXECUTED",
"Any taken branch that is executed"},
{0x55, "OP_EXECUTED",
"Number of operations executed"
"(in instruction or mutli-cycle instruction)"},
{0x56, "CYCLES_INST_STALL",
"Cycles where no instruction available"},
{0x57, "CYCLES_INST",
"Number of instructions issued in a cycle"},
{0x58, "CYCLES_NEON_DATA_STALL",
"Number of cycles the processor waits on MRC data from NEON"},
{0x59, "CYCLES_NEON_INST_STALL",
"Number of cycles the processor waits on NEON instruction queue or"
"NEON load queue"},
{0x5A, "NEON_CYCLES",
"Number of cycles NEON and integer processors are not idle"},
{0x70, "PMU0_EVENTS",
"Number of events from external input source PMUEXTIN[0]"},
{0x71, "PMU1_EVENTS",
"Number of events from external input source PMUEXTIN[1]"},
{0x72, "PMU_EVENTS",
"Number of events from both external input sources PMUEXTIN[0]"
"and PMUEXTIN[1]"},
{0xFF, "CPU_CYCLES",
"Number of CPU cycles"},
#endif
};
void usage()
{
printf("\nopcontrol: usage:\n"
" --list-events list event types\n"
" --help this message\n"
" --verbose show extra status\n"
" --setup setup directories\n"
#if defined(__i386__) || defined(__x86_64__)
" --quick setup and select CPU_CLK_UNHALTED:60000\n"
#else
" --quick setup and select CPU_CYCLES:150000\n"
#endif
" --status show configuration\n"
" --start start data collection\n"
" --stop stop data collection\n"
" --reset clears out data from current session\n"
" --shutdown kill the oprofile daeman\n"
" --callgraph=depth callgraph depth\n"
" --event=eventspec\n"
" Choose an event. May be specified multiple times.\n"
" eventspec is in the form of name[:count], where :\n"
" name: event name, see \"opcontrol --list-events\"\n"
" count: reset counter value\n"
" --vmlinux=file vmlinux kernel image\n"
" --kernel-range=start,end\n"
" kernel range vma address in hexadecimal\n"
);
}
void setup_session_dir()
{
int fd;
fd = open(OP_DATA_DIR, O_RDONLY);
if (fd != -1) {
system("rm -r "OP_DATA_DIR);
close(fd);
}
if (mkdir(OP_DATA_DIR, 755)) {
fprintf(stderr, "Cannot create directory \"%s\": %s\n",
OP_DATA_DIR, strerror(errno));
}
if (mkdir(OP_DATA_DIR"/samples", 644)) {
fprintf(stderr, "Cannot create directory \"%s\": %s\n",
OP_DATA_DIR"/samples", strerror(errno));
}
}
int do_setup()
{
char dir[1024];
setup_session_dir();
if (mkdir(OP_DRIVER_BASE, 644)) {
fprintf(stderr, "Cannot create directory "OP_DRIVER_BASE": %s\n",
strerror(errno));
return -1;
}
if (system("mount -t oprofilefs nodev "OP_DRIVER_BASE)) {
return -1;
}
return 0;
}
void do_list_events()
{
unsigned int i;
printf("%-20s: %s\n", "name", "meaning");
printf("----------------------------------------"
"--------------------------------------\n");
for (i = 0; i < sizeof(event_info)/sizeof(struct event_info); i++) {
printf("%-20s: %s\n", event_info[i].name, event_info[i].explanation);
}
}
int find_event_idx_from_name(const char *name)
{
unsigned int i;
for (i = 0; i < sizeof(event_info)/sizeof(struct event_info); i++) {
if (!strcmp(name, event_info[i].name)) {
return i;
}
}
return -1;
}
const char * find_event_name_from_id(int id)
{
unsigned int i;
for (i = 0; i < sizeof(event_info)/sizeof(struct event_info); i++) {
if (event_info[i].id == id) {
return event_info[i].name;
}
}
return NULL;
}
int process_event(const char *event_spec)
{
char event_name[512];
char count_name[512];
unsigned int i;
int event_idx;
int count_val;
strncpy(event_name, event_spec, 512);
count_name[0] = 0;
/* First, check if the name is followed by ":" */
for (i = 0; i < strlen(event_name); i++) {
if (event_name[i] == 0) {
break;
}
if (event_name[i] == ':') {
strncpy(count_name, event_name+i+1, 512);
event_name[i] = 0;
break;
}
}
event_idx = find_event_idx_from_name(event_name);
if (event_idx == -1) {
fprintf(stderr, "Unknown event name: %s\n", event_name);
return -1;
}
/* Use defualt count */
if (count_name[0] == 0) {
count_val = min_count[0];
} else {
count_val = atoi(count_name);
}
selected_events[num_events] = event_idx;
selected_counts[num_events++] = count_val;
verbose("event_id is %d\n", event_info[event_idx].id);
verbose("count_val is %d\n", count_val);
return 0;
}
int echo_dev(const char* str, int val, const char* file, int counter)
{
char fullname[512];
char content[128];
int fd;
if (counter >= 0) {
snprintf(fullname, 512, OP_DRIVER_BASE"/%d/%s", counter, file);
}
else {
snprintf(fullname, 512, OP_DRIVER_BASE"/%s", file);
}
fd = open(fullname, O_WRONLY);
if (fd<0) {
fprintf(stderr, "Cannot open %s: %s\n", fullname, strerror(errno));
return fd;
}
if (str == 0) {
sprintf(content, "%d", val);
}
else {
strncpy(content, str, 128);
}
verbose("Configure %s (%s)\n", fullname, content);
write(fd, content, strlen(content));
close(fd);
return 0;
}
int read_num(const char* file)
{
char buffer[256];
int fd = open(file, O_RDONLY);
if (fd<0) return -1;
int rd = read(fd, buffer, sizeof(buffer)-1);
buffer[rd] = 0;
return atoi(buffer);
}
void do_status()
{
int num;
char fullname[512];
int i;
printf("Driver directory: %s\n", OP_DRIVER_BASE);
printf("Session directory: %s\n", OP_DATA_DIR);
for (i = 0; i < MAX_EVENTS; i++) {
sprintf(fullname, OP_DRIVER_BASE"/%d/enabled", i);
num = read_num(fullname);
if (num > 0) {
printf("Counter %d:\n", i);
/* event name */
sprintf(fullname, OP_DRIVER_BASE"/%d/event", i);
num = read_num(fullname);
printf(" name: %s\n", find_event_name_from_id(num));
/* profile interval */
sprintf(fullname, OP_DRIVER_BASE"/%d/count", i);
num = read_num(fullname);
printf(" count: %d\n", num);
}
else {
printf("Counter %d disabled\n", i);
}
}
num = read_num(OP_DATA_DIR"/lock");
if (num >= 0) {
int fd;
/* Still needs to check if this lock is left-over */
sprintf(fullname, "/proc/%d", num);
fd = open(fullname, O_RDONLY);
if (fd == -1) {
printf("Session directory is not clean - do \"opcontrol --setup\""
" before you continue\n");
return;
}
else {
close(fd);
printf("oprofiled pid: %d\n", num);
num = read_num(OP_DRIVER_BASE"/enable");
printf("profiler is%s running\n", num == 0 ? " not" : "");
num = read_num(OP_DRIVER_BASE"/stats/cpu0/sample_received");
printf(" %9u samples received\n", num);
num = read_num(OP_DRIVER_BASE"/stats/cpu0/sample_lost_overflow");
printf(" %9u samples lost overflow\n", num);
#if defined(__i386__) || defined(__x86_64__)
/* FIXME on ARM - backtrace seems broken there */
num = read_num(OP_DRIVER_BASE"/stats/cpu0/backtrace_aborted");
printf(" %9u backtrace aborted\n", num);
num = read_num(OP_DRIVER_BASE"/backtrace_depth");
printf(" %9u backtrace_depth\n", num);
#endif
}
}
else {
printf("oprofiled is not running\n");
}
}
void do_reset()
{
int fd;
fd = open(OP_DATA_DIR"/samples/current", O_RDONLY);
if (fd == -1) {
return;
}
close(fd);
system("rm -r "OP_DATA_DIR"/samples/current");
}
int main(int argc, char * const argv[])
{
int option_index;
char command[1024];
/* Initialize default strings */
strcpy(vmlinux, "--no-vmlinux");
strcpy(kernel_range, "");
while (1) {
int c = getopt_long(argc, argv, "c:e:v:r:dhVt", long_options, &option_index);
if (c == -1) {
break;
}
switch (c) {
case 0:
break;
/* --callgraph */
case 'c':
strncpy(callgraph, optarg, sizeof(callgraph));
break;
/* --event */
case 'e':
if (num_events == MAX_EVENTS) {
fprintf(stderr, "More than %d events specified\n",
MAX_EVENTS);
exit(1);
}
if (process_event(optarg)) {
exit(1);
}
break;
/* --vmlinux */
case 'v':
sprintf(vmlinux, "-k %s", optarg);
break;
/* --kernel-range */
case 'r':
sprintf(kernel_range, "-r %s", optarg);
break;
case 'd':
/* --dump */ {
int pid = read_num(OP_DATA_DIR"/lock");
echo_dev("1", 0, "dump", -1);
if (pid >= 0) {
sleep(1);
kill(pid, SIGHUP);
}
break;
}
/* --shutdown */
case 'h': {
int pid = read_num(OP_DATA_DIR"/lock");
if (pid >= 0) {
kill(pid, SIGHUP); /* Politely ask the daemon to close files */
sleep(1);
kill(pid, SIGTERM);/* Politely ask the daemon to die */
sleep(1);
kill(pid, SIGKILL);
}
setup_session_dir();
break;
}
/* --verbose */
case 'V':
verbose_print++;
break;
/* --status */
case 't':
do_status();
break;
default:
usage();
exit(1);
}
}
verbose("list_events = %d\n", list_events);
verbose("setup = %d\n", setup);
if (list_events) {
do_list_events();
}
if (quick) {
#if defined(__i386__) || defined(__x86_64__)
process_event("CPU_CLK_UNHALTED");
#else
process_event("CPU_CYCLES");
#endif
setup = 1;
}
if (reset) {
do_reset();
}
if (show_usage) {
usage();
}
if (setup) {
if (do_setup()) {
fprintf(stderr, "do_setup failed");
exit(1);
}
}
if (strlen(callgraph)) {
echo_dev(callgraph, 0, "backtrace_depth", -1);
}
if (num_events != 0) {
int i;
strcpy(command, "oprofiled --session-dir="OP_DATA_DIR);
#if defined(__i386__) || defined(__x86_64__)
/* Nothing */
#elif !defined(WITH_ARM_V7_A)
/* Since counter #3 can only handle CPU_CYCLES, check and shuffle the
* order a bit so that the maximal number of events can be profiled
* simultaneously
*/
if (num_events == 3) {
for (i = 0; i < num_events; i++) {
int event_idx = selected_events[i];
if (event_info[event_idx].id == 0xff) {
break;
}
}
/* No CPU_CYCLES is found */
if (i == 3) {
fprintf(stderr, "You can only specify three events if one of "
"them is CPU_CYCLES\n");
exit(1);
}
/* Swap CPU_CYCLES to counter #2 (starting from #0)*/
else if (i != 2) {
int temp;
temp = selected_events[2];
selected_events[2] = selected_events[i];
selected_events[i] = temp;
temp = selected_counts[2];
selected_counts[2] = selected_counts[i];
selected_counts[i] = temp;
}
}
#endif
/* Configure the counters and enable them */
for (i = 0; i < num_events; i++) {
int event_idx = selected_events[i];
int setup_result = 0;
if (i == 0) {
snprintf(command+strlen(command), 1024 - strlen(command),
" --events=");
}
else {
snprintf(command+strlen(command), 1024 - strlen(command),
",");
}
/* Compose name:id:count:unit_mask:kernel:user, something like
* --events=CYCLES_DATA_STALL:2:0:200000:0:1:1,....
*/
snprintf(command+strlen(command), 1024 - strlen(command),
"%s:%d:%d:%d:%d:1:1",
event_info[event_idx].name,
event_info[event_idx].id,
i,
selected_counts[i],
event_info[event_idx].um);
setup_result |= echo_dev("1", 0, "user", i);
setup_result |= echo_dev("1", 0, "kernel", i);
setup_result |= echo_dev(NULL, event_info[event_idx].um, "unit_mask", i);
setup_result |= echo_dev("1", 0, "enabled", i);
setup_result |= echo_dev(NULL, selected_counts[i], "count", i);
setup_result |= echo_dev(NULL, event_info[event_idx].id,
"event", i);
if (setup_result) {
fprintf(stderr, "Counter configuration failed for %s\n",
event_info[event_idx].name);
fprintf(stderr, "Did you do \"opcontrol --setup\" first?\n");
exit(1);
}
}
/* Disable the unused counters */
for (i = num_events; i < MAX_EVENTS; i++) {
echo_dev("0", 0, "enabled", i);
}
snprintf(command+strlen(command), 1024 - strlen(command), " %s",
vmlinux);
if (kernel_range[0]) {
snprintf(command+strlen(command), 1024 - strlen(command), " %s",
kernel_range);
}
verbose("command: %s\n", command);
system(command);
}
if (start) {
echo_dev("1", 0, "enable", -1);
}
if (stop) {
echo_dev("0", 0, "enable", -1);
}
}