Mike Dodd | 8cfa702 | 2010-11-17 11:12:26 -0800 | [diff] [blame^] | 1 | /** |
| 2 | * @file op_model_ppro.h |
| 3 | * pentium pro / P6 model-specific MSR operations |
| 4 | * |
| 5 | * @remark Copyright 2002 OProfile authors |
| 6 | * @remark Read the file COPYING |
| 7 | * |
| 8 | * @author John Levon |
| 9 | * @author Philippe Elie |
| 10 | * @author Graydon Hoare |
| 11 | */ |
| 12 | |
| 13 | #include "op_x86_model.h" |
| 14 | #include "op_arch.h" |
| 15 | #include "op_msr.h" |
| 16 | |
| 17 | #define NUM_COUNTERS 2 |
| 18 | #define NUM_CONTROLS 2 |
| 19 | |
| 20 | #define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters.addrs[(c)], (l), (h));} while (0) |
| 21 | #define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters.addrs[(c)], -(u32)(l), -1);} while (0) |
| 22 | #define CTR_OVERFLOWED(n) (!((n) & (1U << 31))) |
| 23 | |
| 24 | #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls.addrs[(c)]), (l), (h));} while (0) |
| 25 | #define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls.addrs[(c)]), (l), (h));} while (0) |
| 26 | #define CTRL_SET_ACTIVE(n) (n |= (1 << 22)) |
| 27 | #define CTRL_SET_INACTIVE(n) (n &= ~(1 << 22)) |
| 28 | #define CTRL_CLEAR(x) (x &= (1 << 21)) |
| 29 | #define CTRL_SET_ENABLE(val) (val |= 1 << 20) |
| 30 | #define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16)) |
| 31 | #define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17)) |
| 32 | #define CTRL_SET_UM(val, m) (val |= (m << 8)) |
| 33 | #define CTRL_SET_EVENT(val, e) (val |= e) |
| 34 | |
| 35 | |
| 36 | static void ppro_fill_in_addresses(struct op_msrs * const msrs) |
| 37 | { |
| 38 | msrs->counters.addrs[0] = MSR_P6_PERFCTR0; |
| 39 | msrs->counters.addrs[1] = MSR_P6_PERFCTR1; |
| 40 | |
| 41 | msrs->controls.addrs[0] = MSR_P6_EVNTSEL0; |
| 42 | msrs->controls.addrs[1] = MSR_P6_EVNTSEL1; |
| 43 | } |
| 44 | |
| 45 | |
| 46 | static void ppro_setup_ctrs(struct op_msrs const * const msrs) |
| 47 | { |
| 48 | uint low, high; |
| 49 | int i; |
| 50 | |
| 51 | /* clear all counters */ |
| 52 | for (i = 0 ; i < NUM_CONTROLS; ++i) { |
| 53 | CTRL_READ(low, high, msrs, i); |
| 54 | CTRL_CLEAR(low); |
| 55 | CTRL_WRITE(low, high, msrs, i); |
| 56 | } |
| 57 | |
| 58 | /* avoid a false detection of ctr overflows in NMI handler */ |
| 59 | for (i = 0; i < NUM_COUNTERS; ++i) |
| 60 | CTR_WRITE(1, msrs, i); |
| 61 | |
| 62 | /* enable active counters */ |
| 63 | for (i = 0; i < NUM_COUNTERS; ++i) { |
| 64 | if (sysctl.ctr[i].enabled) { |
| 65 | |
| 66 | CTR_WRITE(sysctl.ctr[i].count, msrs, i); |
| 67 | |
| 68 | CTRL_READ(low, high, msrs, i); |
| 69 | CTRL_CLEAR(low); |
| 70 | CTRL_SET_ENABLE(low); |
| 71 | CTRL_SET_USR(low, sysctl.ctr[i].user); |
| 72 | CTRL_SET_KERN(low, sysctl.ctr[i].kernel); |
| 73 | CTRL_SET_UM(low, sysctl.ctr[i].unit_mask); |
| 74 | CTRL_SET_EVENT(low, sysctl.ctr[i].event); |
| 75 | CTRL_WRITE(low, high, msrs, i); |
| 76 | } |
| 77 | } |
| 78 | } |
| 79 | |
| 80 | |
| 81 | static void ppro_check_ctrs(uint const cpu, |
| 82 | struct op_msrs const * const msrs, |
| 83 | struct pt_regs * const regs) |
| 84 | { |
| 85 | ulong low, high; |
| 86 | int i; |
| 87 | for (i = 0 ; i < NUM_COUNTERS; ++i) { |
| 88 | CTR_READ(low, high, msrs, i); |
| 89 | if (CTR_OVERFLOWED(low)) { |
| 90 | op_do_profile(cpu, instruction_pointer(regs), IRQ_ENABLED(regs), i); |
| 91 | CTR_WRITE(oprof_data[cpu].ctr_count[i], msrs, i); |
| 92 | } |
| 93 | } |
| 94 | } |
| 95 | |
| 96 | |
| 97 | static void ppro_start(struct op_msrs const * const msrs) |
| 98 | { |
| 99 | uint low, high; |
| 100 | CTRL_READ(low, high, msrs, 0); |
| 101 | CTRL_SET_ACTIVE(low); |
| 102 | CTRL_WRITE(low, high, msrs, 0); |
| 103 | } |
| 104 | |
| 105 | |
| 106 | static void ppro_stop(struct op_msrs const * const msrs) |
| 107 | { |
| 108 | uint low, high; |
| 109 | CTRL_READ(low, high, msrs, 0); |
| 110 | CTRL_SET_INACTIVE(low); |
| 111 | CTRL_WRITE(low, high, msrs, 0); |
| 112 | } |
| 113 | |
| 114 | |
| 115 | struct op_x86_model_spec const op_ppro_spec = { |
| 116 | .num_counters = NUM_COUNTERS, |
| 117 | .num_controls = NUM_CONTROLS, |
| 118 | .fill_in_addresses = &ppro_fill_in_addresses, |
| 119 | .setup_ctrs = &ppro_setup_ctrs, |
| 120 | .check_ctrs = &ppro_check_ctrs, |
| 121 | .start = &ppro_start, |
| 122 | .stop = &ppro_stop |
| 123 | }; |