| /* config.h.in. Generated from configure.ac by autoheader. */ |
| |
| |
| /* PCRE is written in Standard C, but there are a few non-standard things it |
| can cope with, allowing it to run on SunOS4 and other "close to standard" |
| systems. |
| |
| In environments that support the GNU autotools, config.h.in is converted into |
| config.h by the "configure" script. In environments that use CMake, |
| config-cmake.in is converted into config.h. If you are going to build PCRE "by |
| hand" without using "configure" or CMake, you should copy the distributed |
| config.h.generic to config.h, and edit the macro definitions to be the way you |
| need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, |
| so that config.h is included at the start of every source. |
| |
| Alternatively, you can avoid editing by using -D on the compiler command line |
| to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, |
| but if you do, default values will be taken from config.h for non-boolean |
| macros that are not defined on the command line. |
| |
| Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE8 should either be defined |
| (conventionally to 1) for TRUE, and not defined at all for FALSE. All such |
| macros are listed as a commented #undef in config.h.generic. Macros such as |
| MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are |
| surrounded by #ifndef/#endif lines so that the value can be overridden by -D. |
| |
| PCRE uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if |
| HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make |
| sure both macros are undefined; an emulation function will then be used. */ |
| |
| /* By default, the \R escape sequence matches any Unicode line ending |
| character or sequence of characters. If BSR_ANYCRLF is defined (to any |
| value), this is changed so that backslash-R matches only CR, LF, or CRLF. |
| The build-time default can be overridden by the user of PCRE at runtime. */ |
| #undef BSR_ANYCRLF |
| |
| /* If you are compiling for a system that uses EBCDIC instead of ASCII |
| character codes, define this macro to any value. You must also edit the |
| NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15). |
| On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is |
| automatically adjusted. When EBCDIC is set, PCRE assumes that all input |
| strings are in EBCDIC. If you do not define this macro, PCRE will assume |
| input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build |
| a version of PCRE that supports both EBCDIC and UTF-8/16/32. */ |
| #undef EBCDIC |
| |
| /* In an EBCDIC environment, define this macro to any value to arrange for the |
| NL character to be 0x25 instead of the default 0x15. NL plays the role that |
| LF does in an ASCII/Unicode environment. The value must also be set in the |
| NEWLINE macro below. On systems that can use "configure" or CMake to set |
| EBCDIC_NL25, the adjustment of NEWLINE is automatic. */ |
| #undef EBCDIC_NL25 |
| |
| /* Define to 1 if you have the `bcopy' function. */ |
| #undef HAVE_BCOPY |
| |
| /* Define to 1 if you have the <bits/type_traits.h> header file. */ |
| #undef HAVE_BITS_TYPE_TRAITS_H |
| |
| /* Define to 1 if you have the <bzlib.h> header file. */ |
| #undef HAVE_BZLIB_H |
| |
| /* Define to 1 if you have the <dirent.h> header file. */ |
| #undef HAVE_DIRENT_H |
| |
| /* Define to 1 if you have the <dlfcn.h> header file. */ |
| #undef HAVE_DLFCN_H |
| |
| /* Define to 1 if you have the <editline/readline.h> header file. */ |
| #undef HAVE_EDITLINE_READLINE_H |
| |
| /* Define to 1 if you have the <edit/readline/readline.h> header file. */ |
| #undef HAVE_EDIT_READLINE_READLINE_H |
| |
| /* Define to 1 if you have the <inttypes.h> header file. */ |
| #undef HAVE_INTTYPES_H |
| |
| /* Define to 1 if you have the <limits.h> header file. */ |
| #undef HAVE_LIMITS_H |
| |
| /* Define to 1 if the system has the type `long long'. */ |
| #undef HAVE_LONG_LONG |
| |
| /* Define to 1 if you have the `memmove' function. */ |
| #undef HAVE_MEMMOVE |
| |
| /* Define to 1 if you have the <memory.h> header file. */ |
| #undef HAVE_MEMORY_H |
| |
| /* Define if you have POSIX threads libraries and header files. */ |
| #undef HAVE_PTHREAD |
| |
| /* Have PTHREAD_PRIO_INHERIT. */ |
| #undef HAVE_PTHREAD_PRIO_INHERIT |
| |
| /* Define to 1 if you have the <readline/history.h> header file. */ |
| #undef HAVE_READLINE_HISTORY_H |
| |
| /* Define to 1 if you have the <readline/readline.h> header file. */ |
| #undef HAVE_READLINE_READLINE_H |
| |
| /* Define to 1 if you have the <stdint.h> header file. */ |
| #undef HAVE_STDINT_H |
| |
| /* Define to 1 if you have the <stdlib.h> header file. */ |
| #undef HAVE_STDLIB_H |
| |
| /* Define to 1 if you have the `strerror' function. */ |
| #undef HAVE_STRERROR |
| |
| /* Define to 1 if you have the <string> header file. */ |
| #undef HAVE_STRING |
| |
| /* Define to 1 if you have the <strings.h> header file. */ |
| #undef HAVE_STRINGS_H |
| |
| /* Define to 1 if you have the <string.h> header file. */ |
| #undef HAVE_STRING_H |
| |
| /* Define to 1 if you have `strtoimax'. */ |
| #undef HAVE_STRTOIMAX |
| |
| /* Define to 1 if you have `strtoll'. */ |
| #undef HAVE_STRTOLL |
| |
| /* Define to 1 if you have `strtoq'. */ |
| #undef HAVE_STRTOQ |
| |
| /* Define to 1 if you have the <sys/stat.h> header file. */ |
| #undef HAVE_SYS_STAT_H |
| |
| /* Define to 1 if you have the <sys/types.h> header file. */ |
| #undef HAVE_SYS_TYPES_H |
| |
| /* Define to 1 if you have the <type_traits.h> header file. */ |
| #undef HAVE_TYPE_TRAITS_H |
| |
| /* Define to 1 if you have the <unistd.h> header file. */ |
| #undef HAVE_UNISTD_H |
| |
| /* Define to 1 if the system has the type `unsigned long long'. */ |
| #undef HAVE_UNSIGNED_LONG_LONG |
| |
| /* Define to 1 if the compiler supports simple visibility declarations. */ |
| #undef HAVE_VISIBILITY |
| |
| /* Define to 1 if you have the <windows.h> header file. */ |
| #undef HAVE_WINDOWS_H |
| |
| /* Define to 1 if you have the <zlib.h> header file. */ |
| #undef HAVE_ZLIB_H |
| |
| /* Define to 1 if you have `_strtoi64'. */ |
| #undef HAVE__STRTOI64 |
| |
| /* The value of LINK_SIZE determines the number of bytes used to store links |
| as offsets within the compiled regex. The default is 2, which allows for |
| compiled patterns up to 64K long. This covers the vast majority of cases. |
| However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows |
| for longer patterns in extreme cases. */ |
| #undef LINK_SIZE |
| |
| /* Define to the sub-directory in which libtool stores uninstalled libraries. |
| */ |
| #undef LT_OBJDIR |
| |
| /* The value of MATCH_LIMIT determines the default number of times the |
| internal match() function can be called during a single execution of |
| pcre_exec(). There is a runtime interface for setting a different limit. |
| The limit exists in order to catch runaway regular expressions that take |
| for ever to determine that they do not match. The default is set very large |
| so that it does not accidentally catch legitimate cases. */ |
| #undef MATCH_LIMIT |
| |
| /* The above limit applies to all calls of match(), whether or not they |
| increase the recursion depth. In some environments it is desirable to limit |
| the depth of recursive calls of match() more strictly, in order to restrict |
| the maximum amount of stack (or heap, if NO_RECURSE is defined) that is |
| used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of |
| match(). To have any useful effect, it must be less than the value of |
| MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is |
| a runtime method for setting a different limit. */ |
| #undef MATCH_LIMIT_RECURSION |
| |
| /* This limit is parameterized just in case anybody ever wants to change it. |
| Care must be taken if it is increased, because it guards against integer |
| overflow caused by enormously large patterns. */ |
| #undef MAX_NAME_COUNT |
| |
| /* This limit is parameterized just in case anybody ever wants to change it. |
| Care must be taken if it is increased, because it guards against integer |
| overflow caused by enormously large patterns. */ |
| #undef MAX_NAME_SIZE |
| |
| /* The value of NEWLINE determines the default newline character sequence. |
| PCRE client programs can override this by selecting other values at run |
| time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338 |
| (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or |
| 3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and |
| 0x25) that are used as the NL line terminator that is equivalent to ASCII |
| LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY), |
| or -2 (ANYCRLF). */ |
| #undef NEWLINE |
| |
| /* PCRE uses recursive function calls to handle backtracking while matching. |
| This can sometimes be a problem on systems that have stacks of limited |
| size. Define NO_RECURSE to any value to get a version that doesn't use |
| recursion in the match() function; instead it creates its own stack by |
| steam using pcre_recurse_malloc() to obtain memory from the heap. For more |
| detail, see the comments and other stuff just above the match() function. |
| */ |
| #undef NO_RECURSE |
| |
| /* Name of package */ |
| #undef PACKAGE |
| |
| /* Define to the address where bug reports for this package should be sent. */ |
| #undef PACKAGE_BUGREPORT |
| |
| /* Define to the full name of this package. */ |
| #undef PACKAGE_NAME |
| |
| /* Define to the full name and version of this package. */ |
| #undef PACKAGE_STRING |
| |
| /* Define to the one symbol short name of this package. */ |
| #undef PACKAGE_TARNAME |
| |
| /* Define to the home page for this package. */ |
| #undef PACKAGE_URL |
| |
| /* Define to the version of this package. */ |
| #undef PACKAGE_VERSION |
| |
| /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested |
| parentheses (of any kind) in a pattern. This limits the amount of system |
| stack that is used while compiling a pattern. */ |
| #undef PARENS_NEST_LIMIT |
| |
| /* to make a symbol visible */ |
| #undef PCRECPP_EXP_DECL |
| |
| /* to make a symbol visible */ |
| #undef PCRECPP_EXP_DEFN |
| |
| /* The value of PCREGREP_BUFSIZE determines the size of buffer used by |
| pcregrep to hold parts of the file it is searching. This is also the |
| minimum value. The actual amount of memory used by pcregrep is three times |
| this number, because it allows for the buffering of "before" and "after" |
| lines. */ |
| #undef PCREGREP_BUFSIZE |
| |
| /* to make a symbol visible */ |
| #undef PCREPOSIX_EXP_DECL |
| |
| /* to make a symbol visible */ |
| #undef PCREPOSIX_EXP_DEFN |
| |
| /* to make a symbol visible */ |
| #undef PCRE_EXP_DATA_DEFN |
| |
| /* to make a symbol visible */ |
| #undef PCRE_EXP_DECL |
| |
| |
| /* If you are compiling for a system other than a Unix-like system or |
| Win32, and it needs some magic to be inserted before the definition |
| of a function that is exported by the library, define this macro to |
| contain the relevant magic. If you do not define this macro, a suitable |
| __declspec value is used for Windows systems; in other environments |
| "extern" is used for a C compiler and "extern C" for a C++ compiler. |
| This macro apears at the start of every exported function that is part |
| of the external API. It does not appear on functions that are "external" |
| in the C sense, but which are internal to the library. */ |
| #undef PCRE_EXP_DEFN |
| |
| /* Define to any value if linking statically (TODO: make nice with Libtool) */ |
| #undef PCRE_STATIC |
| |
| /* When calling PCRE via the POSIX interface, additional working storage is |
| required for holding the pointers to capturing substrings because PCRE |
| requires three integers per substring, whereas the POSIX interface provides |
| only two. If the number of expected substrings is small, the wrapper |
| function uses space on the stack, because this is faster than using |
| malloc() for each call. The threshold above which the stack is no longer |
| used is defined by POSIX_MALLOC_THRESHOLD. */ |
| #undef POSIX_MALLOC_THRESHOLD |
| |
| /* Define to necessary symbol if this constant uses a non-standard name on |
| your system. */ |
| #undef PTHREAD_CREATE_JOINABLE |
| |
| /* Define to 1 if you have the ANSI C header files. */ |
| #undef STDC_HEADERS |
| |
| /* Define to any value to enable support for Just-In-Time compiling. */ |
| #undef SUPPORT_JIT |
| |
| /* Define to any value to allow pcregrep to be linked with libbz2, so that it |
| is able to handle .bz2 files. */ |
| #undef SUPPORT_LIBBZ2 |
| |
| /* Define to any value to allow pcretest to be linked with libedit. */ |
| #undef SUPPORT_LIBEDIT |
| |
| /* Define to any value to allow pcretest to be linked with libreadline. */ |
| #undef SUPPORT_LIBREADLINE |
| |
| /* Define to any value to allow pcregrep to be linked with libz, so that it is |
| able to handle .gz files. */ |
| #undef SUPPORT_LIBZ |
| |
| /* Define to any value to enable the 16 bit PCRE library. */ |
| #undef SUPPORT_PCRE16 |
| |
| /* Define to any value to enable the 32 bit PCRE library. */ |
| #undef SUPPORT_PCRE32 |
| |
| /* Define to any value to enable the 8 bit PCRE library. */ |
| #undef SUPPORT_PCRE8 |
| |
| /* Define to any value to enable JIT support in pcregrep. */ |
| #undef SUPPORT_PCREGREP_JIT |
| |
| /* Define to any value to enable support for Unicode properties. */ |
| #undef SUPPORT_UCP |
| |
| /* Define to any value to enable support for the UTF-8/16/32 Unicode encoding. |
| This will work even in an EBCDIC environment, but it is incompatible with |
| the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or* |
| ASCII/UTF-8/16/32, but not both at once. */ |
| #undef SUPPORT_UTF |
| |
| /* Define to any value for valgrind support to find invalid memory reads. */ |
| #undef SUPPORT_VALGRIND |
| |
| /* Version number of package */ |
| #undef VERSION |
| |
| /* Define to empty if `const' does not conform to ANSI C. */ |
| #undef const |
| |
| /* Define to the type of a signed integer type of width exactly 64 bits if |
| such a type exists and the standard includes do not define it. */ |
| #undef int64_t |
| |
| /* Define to `unsigned int' if <sys/types.h> does not define. */ |
| #undef size_t |