| #! /bin/sh |
| |
| ############################################################################### |
| # Run the PCRE tests using the pcretest program. The appropriate tests are |
| # selected, depending on which build-time options were used. |
| # |
| # All tests are now run both with and without -s, to ensure that everything is |
| # tested with and without studying. However, there are some tests that produce |
| # different output after studying, typically when we are tracing the actual |
| # matching process (for example, using auto-callouts). In these few cases, the |
| # tests are duplicated in the files, one with /S to force studying always, and |
| # one with /SS to force *not* studying always. The use of -s doesn't then make |
| # any difference to their output. There is also one test which compiles invalid |
| # UTF-8 with the UTF-8 check turned off; for this, studying must also be |
| # disabled with /SS. |
| # |
| # When JIT support is available, all appropriate tests are also run with -s+ to |
| # test (again, almost) everything with studying and the JIT option, unless |
| # "nojit" is given on the command line. There are also two tests for |
| # JIT-specific features, one to be run when JIT support is available (unless |
| # "nojit" is specified), and one when it is not. |
| # |
| # Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also |
| # possible to select which to test by giving "-8", "-16" or "-32" on the |
| # command line. |
| # |
| # As well as "nojit", "-8", "-16", and "-32", arguments for this script are |
| # individual test numbers, ranges of tests such as 3-6 or 3- (meaning 3 to the |
| # end), or a number preceded by ~ to exclude a test. For example, "3-15 ~10" |
| # runs tests 3 to 15, excluding test 10, and just "~10" runs all the tests |
| # except test 10. Whatever order the arguments are in, the tests are always run |
| # in numerical order. |
| # |
| # The special argument "3S" runs test 3, stopping if it fails. Test 3 is the |
| # locale test, and failure usually means there's an issue with the locale |
| # rather than a bug in PCRE, so normally subsequent tests are run. "3S" is |
| # useful when you want to debug or update the test. |
| # |
| # Inappropriate tests are automatically skipped (with a comment to say so): for |
| # example, if JIT support is not compiled, test 12 is skipped, whereas if JIT |
| # support is compiled, test 13 is skipped. |
| # |
| # Other arguments can be one of the words "valgrind", "valgrind-log", or "sim" |
| # followed by an argument to run cross-compiled executables under a simulator, |
| # for example: |
| # |
| # RunTest 3 sim "qemu-arm -s 8388608" |
| # |
| # There are two special cases where only one argument is allowed: |
| # |
| # If the first and only argument is "ebcdic", the script runs the special |
| # EBCDIC test that can be useful for checking certain EBCDIC features, even |
| # when run in an ASCII environment. |
| # |
| # If the script is obeyed as "RunTest list", a list of available tests is |
| # output, but none of them are run. |
| ############################################################################### |
| |
| # Define test titles in variables so that they can be output as a list. Some |
| # of them are modified (e.g. with -8 or -16) when used in the actual tests. |
| |
| title1="Test 1: Main functionality (Compatible with Perl >= 5.10)" |
| title2="Test 2: API, errors, internals, and non-Perl stuff" |
| title3="Test 3: Locale-specific features" |
| title4A="Test 4: UTF" |
| title4B=" support (Compatible with Perl >= 5.10)" |
| title5="Test 5: API, internals, and non-Perl stuff for UTF" |
| title6="Test 6: Unicode property support (Compatible with Perl >= 5.10)" |
| title7="Test 7: API, internals, and non-Perl stuff for Unicode property support" |
| title8="Test 8: DFA matching main functionality" |
| title9="Test 9: DFA matching with UTF" |
| title10="Test 10: DFA matching with Unicode properties" |
| title11="Test 11: Internal offsets and code size tests" |
| title12="Test 12: JIT-specific features (when JIT is available)" |
| title13="Test 13: JIT-specific features (when JIT is not available)" |
| title14="Test 14: Specials for the basic 8-bit library" |
| title15="Test 15: Specials for the 8-bit library with UTF-8 support" |
| title16="Test 16: Specials for the 8-bit library with Unicode propery support" |
| title17="Test 17: Specials for the basic 16/32-bit library" |
| title18="Test 18: Specials for the 16/32-bit library with UTF-16/32 support" |
| title19="Test 19: Specials for the 16/32-bit library with Unicode property support" |
| title20="Test 20: DFA specials for the basic 16/32-bit library" |
| title21="Test 21: Reloads for the basic 16/32-bit library" |
| title22="Test 22: Reloads for the 16/32-bit library with UTF-16/32 support" |
| title23="Test 23: Specials for the 16-bit library" |
| title24="Test 24: Specials for the 16-bit library with UTF-16 support" |
| title25="Test 25: Specials for the 32-bit library" |
| title26="Test 26: Specials for the 32-bit library with UTF-32 support" |
| |
| maxtest=26 |
| |
| if [ $# -eq 1 -a "$1" = "list" ]; then |
| echo $title1 |
| echo $title2 "(not UTF)" |
| echo $title3 |
| echo $title4A $title4B |
| echo $title5 support |
| echo $title6 |
| echo $title7 |
| echo $title8 |
| echo $title9 |
| echo $title10 |
| echo $title11 |
| echo $title12 |
| echo $title13 |
| echo $title14 |
| echo $title15 |
| echo $title16 |
| echo $title17 |
| echo $title18 |
| echo $title19 |
| echo $title20 |
| echo $title21 |
| echo $title22 |
| echo $title23 |
| echo $title24 |
| echo $title25 |
| echo $title26 |
| exit 0 |
| fi |
| |
| # Set up a suitable "diff" command for comparison. Some systems |
| # have a diff that lacks a -u option. Try to deal with this. |
| |
| cf="diff" |
| diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u" |
| |
| # Find the test data |
| |
| if [ -n "$srcdir" -a -d "$srcdir" ] ; then |
| testdata="$srcdir/testdata" |
| elif [ -d "./testdata" ] ; then |
| testdata=./testdata |
| elif [ -d "../testdata" ] ; then |
| testdata=../testdata |
| else |
| echo "Cannot find the testdata directory" |
| exit 1 |
| fi |
| |
| |
| # ------ Special EBCDIC Test ------- |
| |
| if [ $# -eq 1 -a "$1" = "ebcdic" ]; then |
| ./pcretest -C ebcdic >/dev/null |
| ebcdic=$? |
| if [ $ebcdic -ne 1 ] ; then |
| echo "Cannot run EBCDIC tests: EBCDIC support not compiled" |
| exit 1 |
| fi |
| |
| for opt in "" "-s" "-dfa" "-s -dfa"; do |
| ./pcretest -q $opt $testdata/testinputEBC >testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutputEBC testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-dfa" ] ; then echo " OK using DFA" |
| elif [ "$opt" = "-s -dfa" ] ; then echo " OK using DFA with study" |
| else echo " OK" |
| fi |
| done |
| |
| exit 0 |
| fi |
| |
| |
| # ------ Normal Tests ------ |
| |
| # Default values |
| |
| arg8= |
| arg16= |
| arg32= |
| nojit= |
| sim= |
| skip= |
| valgrind= |
| |
| # This is in case the caller has set aliases (as I do - PH) |
| unset cp ls mv rm |
| |
| # Process options and select which tests to run; for those that are explicitly |
| # requested, check that the necessary optional facilities are available. |
| |
| do1=no |
| do2=no |
| do3=no |
| do4=no |
| do5=no |
| do6=no |
| do7=no |
| do8=no |
| do9=no |
| do10=no |
| do11=no |
| do12=no |
| do13=no |
| do14=no |
| do15=no |
| do16=no |
| do17=no |
| do18=no |
| do19=no |
| do20=no |
| do21=no |
| do22=no |
| do23=no |
| do24=no |
| do25=no |
| do26=no |
| |
| while [ $# -gt 0 ] ; do |
| case $1 in |
| 1) do1=yes;; |
| 2) do2=yes;; |
| 3) do3=yes;; |
| 4) do4=yes;; |
| 5) do5=yes;; |
| 6) do6=yes;; |
| 7) do7=yes;; |
| 8) do8=yes;; |
| 9) do9=yes;; |
| 10) do10=yes;; |
| 11) do11=yes;; |
| 12) do12=yes;; |
| 13) do13=yes;; |
| 14) do14=yes;; |
| 15) do15=yes;; |
| 16) do16=yes;; |
| 17) do17=yes;; |
| 18) do18=yes;; |
| 19) do19=yes;; |
| 20) do20=yes;; |
| 21) do21=yes;; |
| 22) do22=yes;; |
| 23) do23=yes;; |
| 24) do24=yes;; |
| 25) do25=yes;; |
| 26) do26=yes;; |
| -8) arg8=yes;; |
| -16) arg16=yes;; |
| -32) arg32=yes;; |
| nojit) nojit=yes;; |
| sim) shift; sim=$1;; |
| valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";; |
| valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";; |
| ~*) |
| if expr "$1" : '~[0-9][0-9]*$' >/dev/null; then |
| skip="$skip `expr "$1" : '~\([0-9]*\)*$'`" |
| else |
| echo "Unknown option or test selector '$1'"; exit 1 |
| fi |
| ;; |
| *-*) |
| if expr "$1" : '[0-9][0-9]*-[0-9]*$' >/dev/null; then |
| tf=`expr "$1" : '\([0-9]*\)'` |
| tt=`expr "$1" : '.*-\([0-9]*\)'` |
| if [ "$tt" = "" ] ; then tt=$maxtest; fi |
| if expr \( "$tf" "<" 1 \) \| \( "$tt" ">" "$maxtest" \) >/dev/null; then |
| echo "Invalid test range '$1'"; exit 1 |
| fi |
| while expr "$tf" "<=" "$tt" >/dev/null; do |
| eval do${tf}=yes |
| tf=`expr $tf + 1` |
| done |
| else |
| echo "Invalid test range '$1'"; exit 1 |
| fi |
| ;; |
| *) echo "Unknown option or test selector '$1'"; exit 1;; |
| esac |
| shift |
| done |
| |
| # Find which optional facilities are available. |
| |
| $sim ./pcretest -C linksize >/dev/null |
| link_size=$? |
| if [ $link_size -lt 2 ] ; then |
| echo "Failed to find internal link size" |
| exit 1 |
| fi |
| if [ $link_size -gt 4 ] ; then |
| echo "Failed to find internal link size" |
| exit 1 |
| fi |
| |
| # All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only |
| # one need be. |
| |
| $sim ./pcretest -C pcre8 >/dev/null |
| support8=$? |
| $sim ./pcretest -C pcre16 >/dev/null |
| support16=$? |
| $sim ./pcretest -C pcre32 >/dev/null |
| support32=$? |
| |
| # Initialize all bitsizes skipped |
| |
| test8=skip |
| test16=skip |
| test32=skip |
| |
| # If no bitsize arguments, select all that are available |
| |
| if [ "$arg8$arg16$arg32" = "" ] ; then |
| if [ $support8 -ne 0 ] ; then |
| test8= |
| fi |
| if [ $support16 -ne 0 ] ; then |
| test16=-16 |
| fi |
| if [ $support32 -ne 0 ] ; then |
| test32=-32 |
| fi |
| |
| # Select requested bit sizes |
| |
| else |
| if [ "$arg8" = yes ] ; then |
| if [ $support8 -eq 0 ] ; then |
| echo "Cannot run 8-bit library tests: 8-bit library not compiled" |
| exit 1 |
| fi |
| test8= |
| fi |
| if [ "$arg16" = yes ] ; then |
| if [ $support16 -eq 0 ] ; then |
| echo "Cannot run 16-bit library tests: 16-bit library not compiled" |
| exit 1 |
| fi |
| test16=-16 |
| fi |
| if [ "$arg32" = yes ] ; then |
| if [ $support32 -eq 0 ] ; then |
| echo "Cannot run 32-bit library tests: 32-bit library not compiled" |
| exit 1 |
| fi |
| test32=-32 |
| fi |
| fi |
| |
| # UTF support always applies to all bit sizes if both are supported; we can't |
| # have UTF-8 support without UTF-16 support (for example). |
| |
| $sim ./pcretest -C utf >/dev/null |
| utf=$? |
| |
| $sim ./pcretest -C ucp >/dev/null |
| ucp=$? |
| |
| jitopt= |
| $sim ./pcretest -C jit >/dev/null |
| jit=$? |
| if [ $jit -ne 0 -a "$nojit" != "yes" ] ; then |
| jitopt=-s+ |
| fi |
| |
| # If no specific tests were requested, select all. Those that are not |
| # relevant will be automatically skipped. |
| |
| if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \ |
| $do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \ |
| $do9 = no -a $do10 = no -a $do11 = no -a $do12 = no -a \ |
| $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \ |
| $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \ |
| $do21 = no -a $do22 = no -a $do23 = no -a $do24 = no -a \ |
| $do25 = no -a $do26 = no ] ; then |
| do1=yes |
| do2=yes |
| do3=yes |
| do4=yes |
| do5=yes |
| do6=yes |
| do7=yes |
| do8=yes |
| do9=yes |
| do10=yes |
| do11=yes |
| do12=yes |
| do13=yes |
| do14=yes |
| do15=yes |
| do16=yes |
| do17=yes |
| do18=yes |
| do19=yes |
| do20=yes |
| do21=yes |
| do22=yes |
| do23=yes |
| do24=yes |
| do25=yes |
| do26=yes |
| fi |
| |
| # Handle any explicit skips at this stage, so that an argument list may consist |
| # only of explicit skips. |
| |
| for i in $skip; do eval do$i=no; done |
| |
| # Show which release and which test data |
| |
| echo "" |
| echo PCRE C library tests using test data from $testdata |
| $sim ./pcretest /dev/null |
| |
| for bmode in "$test8" "$test16" "$test32"; do |
| case "$bmode" in |
| skip) continue;; |
| -16) if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi |
| bits=16; echo "---- Testing 16-bit library ----"; echo "";; |
| -32) if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi |
| bits=32; echo "---- Testing 32-bit library ----"; echo "";; |
| *) bits=8; echo "---- Testing 8-bit library ----"; echo "";; |
| esac |
| |
| # Primary test, compatible with JIT and all versions of Perl >= 5.8 |
| |
| if [ $do1 = yes ] ; then |
| echo $title1 |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput1 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| |
| # PCRE tests that are not JIT or Perl-compatible: API, errors, internals |
| |
| if [ $do2 = yes ] ; then |
| echo $title2 "(not UTF-$bits)" |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput2 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else |
| echo " " |
| echo "** Test 2 requires a lot of stack. If it has crashed with a" |
| echo "** segmentation fault, it may be that you do not have enough" |
| echo "** stack available by default. Please see the 'pcrestack' man" |
| echo "** page for a discussion of PCRE's stack usage." |
| echo " " |
| exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| |
| # Locale-specific tests, provided that either the "fr_FR" or the "french" |
| # locale is available. The former is the Unix-like standard; the latter is |
| # for Windows. Another possibility is "fr". Unfortunately, different versions |
| # of the French locale give different outputs for some items. This test passes |
| # if the output matches any one of the alternative output files. |
| |
| if [ $do3 = yes ] ; then |
| locale -a | grep '^fr_FR$' >/dev/null |
| if [ $? -eq 0 ] ; then |
| locale=fr_FR |
| infile=$testdata/testinput3 |
| outfile=$testdata/testoutput3 |
| outfile2=$testdata/testoutput3A |
| outfile3=$testdata/testoutput3B |
| else |
| infile=test3input |
| outfile=test3output |
| outfile2=test3outputA |
| outfile3=test3outputB |
| locale -a | grep '^french$' >/dev/null |
| if [ $? -eq 0 ] ; then |
| locale=french |
| sed 's/fr_FR/french/' $testdata/testinput3 >test3input |
| sed 's/fr_FR/french/' $testdata/testoutput3 >test3output |
| sed 's/fr_FR/french/' $testdata/testoutput3A >test3outputA |
| sed 's/fr_FR/french/' $testdata/testoutput3B >test3outputB |
| else |
| locale -a | grep '^fr$' >/dev/null |
| if [ $? -eq 0 ] ; then |
| locale=fr |
| sed 's/fr_FR/fr/' $testdata/intestinput3 >test3input |
| sed 's/fr_FR/fr/' $testdata/intestoutput3 >test3output |
| sed 's/fr_FR/fr/' $testdata/intestoutput3A >test3outputA |
| sed 's/fr_FR/fr/' $testdata/intestoutput3B >test3outputB |
| else |
| locale= |
| fi |
| fi |
| fi |
| |
| if [ "$locale" != "" ] ; then |
| echo $title3 "(using '$locale' locale)" |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $infile testtry |
| if [ $? = 0 ] ; then |
| if $cf $outfile testtry >teststdout || \ |
| $cf $outfile2 testtry >teststdout || \ |
| $cf $outfile3 testtry >teststdout |
| then |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| else |
| echo "** Locale test did not run successfully. The output did not match" |
| echo " $outfile, $outfile2 or $outfile3." |
| echo " This may mean that there is a problem with the locale settings rather" |
| echo " than a bug in PCRE." |
| exit 1 |
| fi |
| else exit 1 |
| fi |
| done |
| else |
| echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or" |
| echo "'french' locales exist, or the \"locale\" command is not available" |
| echo "to check for them." |
| echo " " |
| fi |
| fi |
| |
| # Additional tests for UTF support |
| |
| if [ $do4 = yes ] ; then |
| echo ${title4A}-${bits}${title4B} |
| if [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput4 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| if [ $do5 = yes ] ; then |
| echo ${title5}-${bits} support |
| if [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput5 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| if [ $do6 = yes ] ; then |
| echo $title6 |
| if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput6 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Test non-Perl-compatible Unicode property support |
| |
| if [ $do7 = yes ] ; then |
| echo $title7 |
| if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput7 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for DFA matching support |
| |
| if [ $do8 = yes ] ; then |
| echo $title8 |
| for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput8 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| done |
| fi |
| |
| if [ $do9 = yes ] ; then |
| echo ${title9}-${bits} |
| if [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| else |
| for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput9 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| done |
| fi |
| fi |
| |
| if [ $do10 = yes ] ; then |
| echo $title10 |
| if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
| else |
| for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput10 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| done |
| fi |
| fi |
| |
| # Test of internal offsets and code sizes. This test is run only when there |
| # is Unicode property support and the link size is 2. The actual tests are |
| # mostly the same as in some of the above, but in this test we inspect some |
| # offsets and sizes that require a known link size. This is a doublecheck for |
| # the maintainer, just in case something changes unexpectely. The output from |
| # this test is not the same in 8-bit and 16-bit modes. |
| |
| if [ $do11 = yes ] ; then |
| echo $title11 |
| if [ $link_size -ne 2 ] ; then |
| echo " Skipped because link size is not 2" |
| elif [ $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
| else |
| for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput11-$bits testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi |
| done |
| fi |
| fi |
| |
| # Test JIT-specific features when JIT is available |
| |
| if [ $do12 = yes ] ; then |
| echo $title12 |
| if [ $jit -eq 0 -o "$nojit" = "yes" ] ; then |
| echo " Skipped because JIT is not available or not usable" |
| else |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput12 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| # Test JIT-specific features when JIT is not available |
| |
| if [ $do13 = yes ] ; then |
| echo $title13 |
| if [ $jit -ne 0 ] ; then |
| echo " Skipped because JIT is available" |
| else |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput13 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| # Tests for 8-bit-specific features |
| |
| if [ "$do14" = yes ] ; then |
| echo $title14 |
| if [ "$bits" = "16" -o "$bits" = "32" ] ; then |
| echo " Skipped when running 16/32-bit tests" |
| else |
| cp -f $testdata/saved16 testsaved16 |
| cp -f $testdata/saved32 testsaved32 |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput14 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for 8-bit-specific features (needs UTF-8 support) |
| |
| if [ "$do15" = yes ] ; then |
| echo $title15 |
| if [ "$bits" = "16" -o "$bits" = "32" ] ; then |
| echo " Skipped when running 16/32-bit tests" |
| elif [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput15 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for 8-bit-specific features (Unicode property support) |
| |
| if [ $do16 = yes ] ; then |
| echo $title16 |
| if [ "$bits" = "16" -o "$bits" = "32" ] ; then |
| echo " Skipped when running 16/32-bit tests" |
| elif [ $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput16 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for 16/32-bit-specific features |
| |
| if [ $do17 = yes ] ; then |
| echo $title17 |
| if [ "$bits" = "8" ] ; then |
| echo " Skipped when running 8-bit tests" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput17 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for 16/32-bit-specific features (UTF-16/32 support) |
| |
| if [ $do18 = yes ] ; then |
| echo $title18 |
| if [ "$bits" = "8" ] ; then |
| echo " Skipped when running 8-bit tests" |
| elif [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput18-$bits testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for 16/32-bit-specific features (Unicode property support) |
| |
| if [ $do19 = yes ] ; then |
| echo $title19 |
| if [ "$bits" = "8" ] ; then |
| echo " Skipped when running 8-bit tests" |
| elif [ $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
| else |
| for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput19 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for 16/32-bit-specific features in DFA non-UTF-16/32 mode |
| |
| if [ $do20 = yes ] ; then |
| echo $title20 |
| if [ "$bits" = "8" ] ; then |
| echo " Skipped when running 8-bit tests" |
| else |
| for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput20 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput20 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" |
| else echo " OK" |
| fi |
| done |
| fi |
| fi |
| |
| # Tests for reloads with 16/32-bit library |
| |
| if [ $do21 = yes ] ; then |
| echo $title21 |
| if [ "$bits" = "8" ] ; then |
| echo " Skipped when running 8-bit tests" |
| elif [ $link_size -ne 2 ] ; then |
| echo " Skipped because link size is not 2" |
| else |
| cp -f $testdata/saved8 testsaved8 |
| cp -f $testdata/saved16LE-1 testsaved16LE-1 |
| cp -f $testdata/saved16BE-1 testsaved16BE-1 |
| cp -f $testdata/saved32LE-1 testsaved32LE-1 |
| cp -f $testdata/saved32BE-1 testsaved32BE-1 |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput21-$bits testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| # Tests for reloads with 16/32-bit library (UTF-16 support) |
| |
| if [ $do22 = yes ] ; then |
| echo $title22 |
| if [ "$bits" = "8" ] ; then |
| echo " Skipped when running 8-bit tests" |
| elif [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| elif [ $link_size -ne 2 ] ; then |
| echo " Skipped because link size is not 2" |
| else |
| cp -f $testdata/saved16LE-2 testsaved16LE-2 |
| cp -f $testdata/saved16BE-2 testsaved16BE-2 |
| cp -f $testdata/saved32LE-2 testsaved32LE-2 |
| cp -f $testdata/saved32BE-2 testsaved32BE-2 |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput22-$bits testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| if [ $do23 = yes ] ; then |
| echo $title23 |
| if [ "$bits" = "8" -o "$bits" = "32" ] ; then |
| echo " Skipped when running 8/32-bit tests" |
| else |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput23 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput23 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| if [ $do24 = yes ] ; then |
| echo $title24 |
| if [ "$bits" = "8" -o "$bits" = "32" ] ; then |
| echo " Skipped when running 8/32-bit tests" |
| elif [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| else |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput24 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput24 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| if [ $do25 = yes ] ; then |
| echo $title25 |
| if [ "$bits" = "8" -o "$bits" = "16" ] ; then |
| echo " Skipped when running 8/16-bit tests" |
| else |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput25 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput25 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| if [ $do26 = yes ] ; then |
| echo $title26 |
| if [ "$bits" = "8" -o "$bits" = "16" ] ; then |
| echo " Skipped when running 8/16-bit tests" |
| elif [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-$bits support is not available" |
| else |
| $sim $valgrind ./pcretest -q $bmode $testdata/testinput26 testtry |
| if [ $? = 0 ] ; then |
| $cf $testdata/testoutput26 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
| fi |
| echo " OK" |
| fi |
| fi |
| |
| # End of loop for 8/16/32-bit tests |
| done |
| |
| # Clean up local working files |
| rm -f test3input test3output test3outputA testNinput testsaved* teststderr teststdout testtry |
| |
| # End |