blob: 5e78f10a0b4a2f58842dfc4b956beb9f7e4feb3d [file] [log] [blame]
// Copyright 2011 the V8 project authors. All rights reserved.
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following
// disclaimer in the documentation and/or other materials provided
// with the distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Flags: --allow-natives-syntax --smi-only-arrays --expose-gc
// Ensure that ElementsKind transitions in various situations are hoisted (or
// not hoisted) correctly, don't change the semantics programs and don't trigger
// deopt through hoisting in important situations.
support_smi_only_arrays = %HasFastSmiOnlyElements(new Array(1,2,3,4,5,6));
if (support_smi_only_arrays) {
print("Tests include smi-only arrays.");
} else {
print("Tests do NOT include smi-only arrays.");
}
// Force existing ICs from previous stress runs to be flushed, otherwise the
// assumptions in this test about when deoptimizations get triggered are not
// valid.
gc();
if (support_smi_only_arrays) {
// Make sure that a simple elements array transitions inside a loop before
// stores to an array gets hoisted in a way that doesn't generate a deopt in
// simple cases.}
function testDoubleConversion4(a) {
var object = new Object();
a[0] = 0;
var count = 3;
do {
a[0] = object;
} while (--count > 0);
}
testDoubleConversion4(new Array(5));
%OptimizeFunctionOnNextCall(testDoubleConversion4);
testDoubleConversion4(new Array(5));
testDoubleConversion4(new Array(5));
assertTrue(2 != %GetOptimizationStatus(testDoubleConversion4));
// Make sure that non-element related map checks that are not preceded by
// transitions in a loop still get hoisted in a way that doesn't generate a
// deopt in simple cases.
function testExactMapHoisting(a) {
var object = new Object();
a.foo = 0;
a[0] = 0;
a[1] = 1;
var count = 3;
do {
a.foo = object; // This map check should be hoistable
a[1] = object;
result = a.foo == object && a[1] == object;
} while (--count > 0);
}
testExactMapHoisting(new Array(5));
%OptimizeFunctionOnNextCall(testExactMapHoisting);
testExactMapHoisting(new Array(5));
testExactMapHoisting(new Array(5));
assertTrue(2 != %GetOptimizationStatus(testExactMapHoisting));
// Make sure that non-element related map checks do NOT get hoisted if they
// depend on an elements transition before them and it's not possible to hoist
// that transition.
function testExactMapHoisting2(a) {
var object = new Object();
a.foo = 0;
a[0] = 0;
a[1] = 1;
var count = 3;
do {
if (a.bar === undefined) {
a[1] = 2.5;
}
a.foo = object; // This map check should NOT be hoistable because it
// includes a check for the FAST_ELEMENTS map as well as
// the FAST_DOUBLE_ELEMENTS map, which depends on the
// double transition above in the if, which cannot be
// hoisted.
} while (--count > 0);
}
testExactMapHoisting2(new Array(5));
%OptimizeFunctionOnNextCall(testExactMapHoisting2);
testExactMapHoisting2(new Array(5));
testExactMapHoisting2(new Array(5));
assertTrue(2 != %GetOptimizationStatus(testExactMapHoisting2));
// Make sure that non-element related map checks do get hoisted if they use
// the transitioned map for the check and all transitions that they depend
// upon can hoisted, too.
function testExactMapHoisting3(a) {
var object = new Object();
a.foo = 0;
a[0] = 0;
a[1] = 1;
var count = 3;
do {
a[1] = 2.5;
a.foo = object; // This map check should be hoistable because all elements
// transitions in the loop can also be hoisted.
} while (--count > 0);
}
var add_transition = new Array(5);
add_transition.foo = 0;
add_transition[0] = new Object(); // For FAST_ELEMENT transition to be created
testExactMapHoisting3(new Array(5));
%OptimizeFunctionOnNextCall(testExactMapHoisting3);
testExactMapHoisting3(new Array(5));
testExactMapHoisting3(new Array(5));
assertTrue(2 != %GetOptimizationStatus(testExactMapHoisting3));
function testDominatingTransitionHoisting1(a) {
var object = new Object();
a[0] = 0;
var count = 3;
do {
if (a.baz != true) {
a[1] = 2.5;
}
a[0] = object;
} while (--count > 3);
}
testDominatingTransitionHoisting1(new Array(5));
%OptimizeFunctionOnNextCall(testDominatingTransitionHoisting1);
testDominatingTransitionHoisting1(new Array(5));
testDominatingTransitionHoisting1(new Array(5));
assertTrue(2 != %GetOptimizationStatus(testDominatingTransitionHoisting1));
function testHoistingWithSideEffect(a) {
var object = new Object();
a[0] = 0;
var count = 3;
do {
assertTrue(true);
a[0] = object;
} while (--count > 3);
}
testHoistingWithSideEffect(new Array(5));
%OptimizeFunctionOnNextCall(testHoistingWithSideEffect);
testHoistingWithSideEffect(new Array(5));
testHoistingWithSideEffect(new Array(5));
assertTrue(2 != %GetOptimizationStatus(testHoistingWithSideEffect));
function testStraightLineDupeElinination(a,b,c,d,e,f) {
var count = 3;
do {
assertTrue(true);
a[0] = b;
a[1] = c;
a[2] = d;
assertTrue(true);
a[3] = e; // TransitionElementsKind should be eliminated despite call.
a[4] = f;
} while (--count > 3);
}
testStraightLineDupeElinination(new Array(0, 0, 0, 0, 0),0,0,0,0,.5);
testStraightLineDupeElinination(new Array(0, 0, 0, 0, 0),0,0,0,.5,0);
testStraightLineDupeElinination(new Array(0, 0, 0, 0, 0),0,0,.5,0,0);
testStraightLineDupeElinination(new Array(0, 0, 0, 0, 0),0,.5,0,0,0);
testStraightLineDupeElinination(new Array(0, 0, 0, 0, 0),.5,0,0,0,0);
testStraightLineDupeElinination(new Array(.1,.1,.1,.1,.1),0,0,0,0,.5);
testStraightLineDupeElinination(new Array(.1,.1,.1,.1,.1),0,0,0,.5,0);
testStraightLineDupeElinination(new Array(.1,.1,.1,.1,.1),0,0,.5,0,0);
testStraightLineDupeElinination(new Array(.1,.1,.1,.1,.1),0,.5,0,0,0);
testStraightLineDupeElinination(new Array(.1,.1,.1,.1,.1),.5,0,0,0,0);
testStraightLineDupeElinination(new Array(5),.5,0,0,0,0);
testStraightLineDupeElinination(new Array(5),0,.5,0,0,0);
testStraightLineDupeElinination(new Array(5),0,0,.5,0,0);
testStraightLineDupeElinination(new Array(5),0,0,0,.5,0);
testStraightLineDupeElinination(new Array(5),0,0,0,0,.5);
testStraightLineDupeElinination(new Array(5),.5,0,0,0,0);
testStraightLineDupeElinination(new Array(5),0,.5,0,0,0);
testStraightLineDupeElinination(new Array(5),0,0,.5,0,0);
testStraightLineDupeElinination(new Array(5),0,0,0,.5,0);
testStraightLineDupeElinination(new Array(5),0,0,0,0,.5);
%OptimizeFunctionOnNextCall(testStraightLineDupeElinination);
testStraightLineDupeElinination(new Array(5));
testStraightLineDupeElinination(new Array(5));
assertTrue(2 != %GetOptimizationStatus(testStraightLineDupeElinination));
}